ALC 2/1-Basic ADM 60ALC 3/1 -Basic ADM 60-T

Self-levelling crossline laser • With an individually switchable horizontal and vertical laser line• The exceptionally bright laser lines are still highly visible even in poor light conditions• Self-levelling• Optical warning signal when self-levelling range exceeded• Self-levelling which can be switched off• Simple On-button operation• Transportation lock• 1/4” thread for tripod

SPECIFICATONS

Number of lines 1 horizontal/ 1 vertical

Visible area lines 90°

Precision ± 0.02“

Self-levelling range ± 4 °

Max. working range 65‘

Operation duration 6 h

Temperature range 23° - 122 °F

Laser class 2

Weight 15 oz

Type Order no.ALC 2/1-Basic 409.235

Standard equipment:Batteries 3x AA1 padded carrying bag

Self-levelling crossline laser• With one horizontal and two vertical laser lines at a 90° angle plus plumb, can be switched individually• Plumb function• The exceptionally bright laser lines are still highly visible even in poor light conditions• Self-levelling• Optical warning signal when self-levelling range exceeded• Self-levelling which can be switched off• Simple On-button operation• Transportation lock• 1/4” thread for tripod• Ideal for aligning the framework

SPECIFICATONS

Number of lines 1 horizontal/2 vertical plus plumb

Visible area lines 90° horizontal

Precision ± 0.02“

Self-levelling range ± 4 °

Max. working range 65‘

Operation duration 6 h

Temperature range 23° - 122 °F

Laser class 2

Weight 1.3 lbs

Type Order no.ALC 3/1-Basic 409.243

Standard equipment:1 wall holder magnetic Batteries 3x AA 1 padded carrying bag

Laser measuring technologyOverview of power tools

Laser measuring technologyOverview of power tools

2 3

• Quick determination of dimensions on all construction sites• Simple operation• Length, area and volume calculation• Determining heights with indirect distance measurement• Continuous measuring mode• Switchable units of measurement in m/mm, inches/feet• Has 4 reference points• Minimum / maximum function• Automatic stop• Illuminated display• Dust- and splash-proof housing• ¼” connection thread for tripods

• Quick determination of dimensions on all construction sites• Simple operation• Length, area and volume calculation• Determining heights with indirect distance measurement• Continuous measuring mode• Switchable units of measurement in m/mm, inches/feet• Has 4 reference points• Storage function of 20 values• Minimum / maximum function• Automatic stop• Illuminated display• Dust and splash-proof housing• ¼” connection thread for tripods

Laser range finder Laser range finder with touchscreen

SPECIFICATONSPrecision 0.08“

Max. working range 0 - 197‘

Laser class 2

Weight 7 oz

Type Order no.ADM 60 409.154

Standard equipment:Batteries 4x AAA 1 padded carrying bag

SPECIFICATONSPrecision 0.08“

Max. working range 0 - 197‘

Laser class 2

Weight 7 oz

Type Order no.ADM 60-T 409.162

Standard equipment:Batteries 4x AAA 1 padded carrying bag

Laser class 2

4 5

Laser measuring technologyOverview of power tools

Laser measuring technologyOverview of power tools

Self-levelling crossline laser• Two 180° visible laser lines which can be switched individually• Cross-laser projection• Self-levelling• Optical warning signal when self-levelling range exceeded• Self-levelling which can be switched off• Highly visible laser beam thanks to anti-reflective glass• Simple On-button operation• Connectable pulse function for use with receiver• 1/4” thread for tripod

SPECIFICATIONS

Number of lines 1 horizontal/ 1 vertical

Visible area lines 180° horizontal/vertical

Precision ± .2“/33‘

Self-levelling range ± 6 °

Max. working range 98‘

Max. working range with receiver 197‘

Operation duration 25 h

Temperature range -.4 - 122 °F

Laser class 2

Weight 9.9 oz

Type Order no.ALC 2/1 393.665

Standard equipment:Batteries 3x AA 1 wall holder magnetic WB-M 1/4-ALC 1 belt pouch BEP ALC 2/1 1 carry case

360°-Line laser for highest demands• A visible 360° laser line• Self-levelling• Optical warning signal when self-levelling range exceeded• Highly visible laser beam thanks to anti-reflective glass• Simple On-button operation• Connectable pulse function for use with receiver• 1/4” thread for tripod

SPECIFICATIONSNumber of lines 1 horizontal

Visible area lines 360° horizontal

Precision ± .2“/98‘

Self-levelling range ± 8 °

Max. working range 98‘

Max. working range with receiver 197‘

Operation duration 35 h

Temperature range -.4 - 122 °F

Laser class 2

Weight 16 oz

Type Order no.ALC 1-360 393.681

Standard equipment:Batteries 3x D 1 wall/ceiling holder WBC 1/4-ALC 1 carry case

• Digital spirit level for easy levelling• Vertical and horizontal bubble tube• With point laser for optical extension of the spirit level (offset by 30 mm)• High measurement precision• Switchable units of measurement for inclination in degrees, inches/feet or as percentage• Switchable display when working overhead• Storage function for transferring angles• Automatic switch off after 5 minutes• With calibration function• Robust, magnetic aluminium housing with milled contact surfaces• ¼” connection thread for tripods

Standard equipment for all digital spirit level:Batteries 2x AAA 1 padded carrying bag

Digital spirit level Digital spirit level Digital spirit level

SPECIFICATIONS

Precision± 0.1°/0° +90°± 0.2°/2° +89°

Precision bubble tube ± 0.02“

Laser class 2

Size 12“ x 1.3“ x 2.4“

Weight 14 oz

Type Order no.ADL 30 409.189

SPECIFICATIONS

Precision± 0.1°/0° +90°± 0.2°/2° +89°

Precision bubble tube ± 0.02“

Laser class 2

Size 12“ x 1.3“ x 2.4“

Weight 28 oz

Type Order no.ADL 60 409.197

SPECIFICATIONS

Precision± 0.1°/0° +90°± 0.2°/2° +89°

Precision bubble tube ± 0.02“

Laser class 2

Size 47“ x 1.3“ x 2.4“

Weight 2.7 lbs

Type Order no.ADL 120 409.200

extremely robust simple on-button operation

• Digital spirit level for easy levelling• Vertical and horizontal bubble tube• With point laser for optical extension of the spirit level (offset by 30 mm)• High measurement precision• Switchable units of measurement for inclination in degrees, inches/feet or as percentage• Switchable display when working overhead• Storage function for transferring angles• Automatic switch off after 5 minutes• With calibration function• Robust, magnetic aluminium housing with milled contact surfaces• ¼” connection thread for tripods

• Digital spirit level for easy levelling• Vertical and horizontal bubble tube• With point laser for optical extension of the spirit level (offset by 30 mm)• High measurement precision• Switchable units of measurement for inclination in degrees, inches/feet or as percentage• Switchable display when working overhead• Storage function for transferring angles• Automatic switch off after 5 minutes• With calibration function• Robust, magnetic aluminium housing with milled contact surfaces

ADL 30 ALC 2/1ADL 60 ALC 1-360ADL 120

6 7

Laser measuring technologyTripods

Laser measuring technologyOverview of power tools

Laser tripod• Stable elevator tripod with adjustable crank column and extracto column. With 5/8” connection and rubber feet which can be unscrewed. Very handy, when pushed together only 3.6‘ with carrying strap• Work area from 3‘ to 9‘• Adjusting range of the clamping column 1.2‘• Adjusting range of the extraction column 1.4‘

• 3 lb light-weight elevator tripod made of aluminium with 1/4” connection. Rotating and tilting tripod head, including carrying bag• Work area from 2‘ to 5‘

SPECIFICATIONSWorking range 2‘ - 5‘

Connection thread ¼”

Weight 3 lbs

Type Order no.LKS 65-170 F 1/4 398.624

Standard equipment:1 carrying bag

SPECIFICATIONSWorking range 3‘ - 9‘

Connection thread 5⁄8”

Weight 12.5 lbs

Type Order no.LKS 100-300 5/8 398.616

Standard equipment:1 carrying strap 1 adapter LAD 5/8 I-1/4 A

Laser tripod

ALC 2-F LKS 100-300 5/8 LKS 65-170 F 1/4LR 1

Floor layer laser• Two visible laser lines at 90° angle in front of and behind the device• Highly visible laser beam thanks to anti-reflective glass• Robust aluminium housing with integrated stop rail and three steel ball device feet

SPECIFICATIONSNumber of lines 2 at 90° angle

Visible area lines 90° angle

Precision ± 0.08°/19‘

Max. working range 65‘

Operation duration 10 h

Temperature range 14° - 122° F

Laser class 2

Weight 38 oz

Type Order no.ALC 2-F 393.673

Standard equipment:2 target plates red FTR-M Batteries 3x AA 1 carry case

Laser receiver• Receiver for horizontally and vertically pulsed laser lines. Can be used with ALC 1-360 and 2/1• Adjustable display precision• Display on front and back• Acoustic signal which can be switched off when laser received• Floor level mark (on-Grade)

SPECIFICATIONSNumber of lines 2 at 90° angle

Working range 98‘ - 246‘

Precision I=.03“ / II=.07“

Operation duration 30 h

Temperature range -4° - +140° F

Weight 5 oz

Type Order no.LR 1 393.703

Standard equipment:Batteries 9V-unit 1 holder SC LR 1

Robust aluminium housing

Safety information! FLEX laser measuring devices meet all international safety standards. They comply with laser class 2 or 2M according to DIN EN 60825-1:2001-11 (wave length 635-670 nm, < 1mW output) and are safe for eyes and skin under normal use. Nevertheless one should never look directly into the laser beam when using laser measuring devices.