Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
AKER SOLUTIONSMH Model 1889 & 1899
“The Power Jaws enables correct make-up and prevents egging effect on connections,
creating very low tong marks that will improve the life of your drillpipe and casing.
It’s a three in one solution.”
Ørjan Kvande
The Power Jaws HistoryThe market presented us with a challenge: Standard equipment was not designed for the new requirements. Alternative solutions were not optimized for new drillpipe standards and caused reduction in safety and efficiency.
We developed the Power Jaws as the first low-marking system to handle drillpipe in standard Iron Roughneck and DDM Torque wrench.
Our system is designed to handle all sizes of equipment, making trouble free and cost ef-fective operations for all our customers. This is made possible through features such as curved dies and the Key Hole system. This enables easy change out between our different jaws sizes without any loose parts. The Power Jaws will do the job right every time, creating value and improving safety. We have developed Power Jaws and dies for different manufacturers, making handling of new pipe design possible.
References:
Transocean | StatoilHydro | Odfjell Drilling | Aker Drilling | Dolphin | SeaWell | KCA Deutag International | KCA Deutag Norway
2
We pursued the challenge- turned it “upside down” and found the simple solution - Power Jaws
3
StandardDies total contact angle: 35° Dies contact length: 1188 mmSpace between dies: 152 mmMinimum tongspace: 448 mm
“Designed to handle all sizes”
Standard solutionThe standard jaw is designed to handle all sizes of drillpipe. The compromise of “One size fits all”, does not meet the challenge of drillpipe with high torque and slim tool joints. The standard jaw requires high clamping force to achieve high torque, creating documented “Egging” effect/ovality, resulting in insufficient make-up and brake-out problems.
4
“Designed to fit your pipe”
Designed to fit your pipe
Power JawsDies total contact angle: 172° Dies contact length: 7200 mmSpace between dies: 75-275 mmMinimum tongspace: 325-475 mm
Power JawsThe Power Jaw fits of the tool joint. With curved dies 33 % shorter than the standard dies, the contact area is increased by 490%. The result is no “Egging” effect, guaranteeing a correct make-up and safe, effective, trouble-free operations.
Type
1 +
Typ
e 1
Type
1 +
Typ
e 2
5
• No loose parts
• Easy replacement of dies
• Fracture resistance > 8 metric ton
• Safe and simple
Die Locking system
• No loose parts
• Easy replacement
• Safe and simple
• Bolt protection
Keyhole function
• Manufactured in one piece
• High grade steel
• Green Chrome corrosion protection
• Powder-coated in acc. to OLF guidence
Quality
”Color coded in according to OLF guidence”
TOTAL CONTROL - TOTAL POWER
6
”Produced from one piece – Custom made”
TOTAL CONTROL - TOTAL POWER
7
“ A quick & easy backup solution”
Multi JawBottom Hole/Back Up jaw for full flexibility, with our Key hole function.
Handle sizes from 4 3/4” - 9 1/2”
MULTI JAW
8
POWER DIES
“Power Dies and Jaws the perfect match for your high torque connection.”
Power Dies Power Dies designed to fit the circumference of the
tool joint. We can produce low marking dies for UBO
and TTRD project as well as our standard that gives
you perfect result every time.
”Deformation of box tool joint created by low contact area and high clamping force.”
THE EGGING EFFECT
9
LOGISTICS & QUALITY
Logistics QualityQA controlOur products has full traceability, this is secured by individual tracking numbers.
Minimum stock to secure quick deliveryOur stock holding gives the customer quick and secure delivery in accordance to their demands.
Delivery from stock: 1-2 days.Special products lead time 2-3 weeks.
“Quality Assurance & Quality Control guaranteed”
10
RANGE OF JAWSLOGISTICS & QUALITY
“Quality Assurance & Quality Control guaranteed”
Color Pipe Range - Jaws Part No.
6 5/8” DP OD 8 16/32” - 7 24/32” RN 8 16/32” - 7 24/32” Type 1* R2
5 7/8” DP OD 7 8/32” - 6 23/32” RN 7 8/32”- 6 23/32” Type 1* R2
5 1/2” DP OD 7 8/32” - 6 23/32” RN 7 8/32”- 6 23/32” Type 1* R2
5” DP OD 6 20/32”- 6 3/32” RN 6 20/32”- 6 3/32” Type 1* R2
4 1/2” DP OD 6 20/32”- 6 3/32” RN 6 20/32”- 6 3/32” Type 1* R2
4” DP OD 5” - 4 20/32” RN 5” - 4 20/32” Type 1* R2
3 1/2” DP OD 5” - 4 20/32” RN 5” - 4 20/32” Type 1* R2
2 7/8” DP OD 3 16/32” - 3 4/32” RN 3 16/32” - 3 4/32” Type 1* R2
Multi Jaw OD 9 16/32” - 4 24/32” RN 9 16/32”- 4 24/32” R2
RAL 9016
RAL 9005
RAL 6010
RAL 1021
RAL 4001
RAL4003
RAL 5003
RAL 9016
RAL 9006
Bolt kit Part.no MH MC6S-16X45-12.9
* Type 2 for extended tong space, more info page 5
11
For more information [email protected]
www.powerjaws.no