Upload
sunil1978
View
11
Download
0
Tags:
Embed Size (px)
DESCRIPTION
LTE Solutions from Airspan
Citation preview
Air4GInnovative. Compact. All-outdoor.
Integrated LTE multi-platform eNodeB exceeding the extremes in cost-effi ciency
Air4G A 4G network revolution in a compact, effi cient package
Air4G
Integrated LTE multi-platform base station
Airspan Networks is addressing a growing demand for LTE connectivity
worldwide. The use of mobile broadband services is accelerating
at exceptional rates with increased applications such as gaming, social
networking and video for mobile devices. LTE enables users to carry
the same user experience they have at home or in the offi ce while they
are on-the-go.
Airspans Air4G eNodeB ensures the highest
quality, capacity and range on a network while
meeting the requirements of a wide variety
of applications for carriers and operator as
well as vertical markets such as smart utilities,
transportation and public safety.
4G LTE connectivity means that a user can enjoy bandwidth
intensive applications while on the move. This is made possible
thanks to the network support for handovers and roaming.
Airspan solutions maintain a connection while the user moves
across cell borders, essentially handing off the service from one
eNodeB to the next.
Air4G eNodeB operates in a wide frequency range, from
700 MHz up to 3.8 GHz, including LTE bands 1, 2, 3, 7, 9, 12, 17,
20, 38, 40, 41, 42, and 43, supporting all channel sizes, from
1.4MHz up to 20MHz. Air4G has variants with two transmitters
and two or four receivers, supporting both FDD and TDD.
Air4G is interoperable with numerous end user devices of all
form factors, based on all leading chipset manufacturers. It is
also interoperable with various core network solutions.
The unique form factor of Air4G secures the investment of the operator and minimizes the OPEX and CAPEX. While offering capabilitiessuch as MIMO and advanced Frequency Domain Scheduling. These capabilities enable higher throughput, range, and capacity with more effecient use of the spectrum.
p
INNOVATIVE RADIO TECHNOLOGYAir4G employs software defi ned radio (SDR) technology, together
with two transmit paths and two or four receive paths, antennas
and GPS receiver all in a highly integrated, physically small and
light, all outdoor package. Air4G is optimized for working across
the entire 700 MHz to 3.8 GHz spectrum, maintaining its high
performance regardless of the chosen LTE band, and has been
designed to address the markets needs by supporting the current
and future air interfaces thanks to its SDR technology.
FLEXIBLE ARCHITECTUREAir4G has been conceived for deployment in a 1-sector
confi guration or in a 3-sector confi guration, which is the
optimum confi guration for LTE deployments. Air4G design also
incorporates an Ethernet switch which enables the traffi c from 3
sectors to be aggregated for backhaul and network interfacing.
The switch has Copper and Fiber Giga Ethernet interfaces
towards the backhaul or backbone.
RELEASE 10 LTE-ADVANCEDAir4G provides the outdoor Micro layer of a Heterogeneous LTE-
Advanced network deployment (HetNet). Advanced Release 10
feature sets include support for Self-Optimizing Networks (SON)
and eICIC which enables N=1 frequency re-use with the Umbrella
Macro cell.
ALL-OUTDOOR, ALL-IN-ONETraditional split indoor-outdoor architecture eNodeBs which support multiple sectors are being replaced by new, lower CAPEX and OPEX, compact eNodeBs. Air4G is such a product. Its all-outdoor, compact structure yields a lower power consuming, greener solution that is environmentally friendly.
Air4G is a highly integrated compact, yet powerful, eNodeB with all-in-one packaging of RF and base-band components. It is available as an all outdoor solution to minimize physical footprint and operator OPEX. It saves the need for an air conditioned shelter (which is required in other architectures such as split indoor/outdoor architectures).
Air4G complements Pico cells such as Airspans AirSynergy product line (and naturally has much higher Tx power and much better link budget). Thanks to the effi cient power amplifi er technology employed in its RF implementation, Air4G implements dual 40dBm (10W) transmitters in 2.X GHz spectrum and dual 37 dBm (5W) transmitters in 3.X GHz spectrum.
EASE OF DEPLOYMENT WITH AirSONAir4G is designed to integrate with standardized LTE Access SON
solutions. AirSON, Airspans SON solution, is layered and consists
of both Integrated eNodeB distributed SON technology, as well
as a standardized SON interface for network based centralized
SON.
The eNodeBs self-confi gure, self-connect, and self-optimize.
In addition, unlike conventional mobile network planning and
design, expansion of the coverage area can be optimized and
adapted depending on the local need.
COST-EFFECTIVEAir4G supports a pay-as-you-grow deployment plan. An operator
can begin with a single unit and add eNodeBs as needed. With
fl exible options, Air4G supports 3GPP LTE Release 9 with a
seamless upgrade path to LTE-Advanced and beyond.
Providing high power and consuming less power perfectly
positions Air4G to save operating expenses and cut costs while
maximizing revenue potentials. Its compact size allows for easy,
quick and fl exible installation anywhere needed not just on
traditional communications towers.
Coupled with Airspans AirCore EPC-in-a-Box, a revolutionary 1RU
complete EPC solution, Air4G provides an ideal cost eff ective
solution for smaller-sized deployments, easily scalable to a full
blown network. Air4G has a rich interoperable device off ering
with core networks and third-party end user devices including
multiple handsets, indoor and outdoor UEs, as well as USB
dongles from various manufacturers. Air4G has a proven high
level of integration with various core elements from Tier-1 EPC
vendors, as well as standalone billing platforms.
Air4G is managed via Airspans simple, intuitive, web-based EMS
called Netspan.
LTE SPECIFICATIONS
RADIO INTERFACE
3GPP Version: Release 9
( upgradeable to Release10 and beyond )
Operational Frequency Bands: 1, 2, 3, 7, 9, 12, 17, 20, 38, 40, 41, 42 and 43 Duplex: FDD & TDD
Channel BW: 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz, 20 MHz
Max Transmit Power: 2 x 40 dBm
MCS Support: Up to MCS28
(64-QAM at 0.89 rate)
Synchronization: GPS/Glonass & IEEE1588-2008
KEY FEATURES
Advanced Antenna Techniques 2 x 2 MIMO SU-MIMO MU-MIMO
System Features Self Optimized Networks Plug-and-Play Auto Confi guration Inter-RAT Mobility RAN Sharing Automatic Neighbor Relation (ANR) Inter-cell Interference Coordination Voice over LTE (VoLTE) IPSec
PHYSICAL SPECIFICATIONS
Antenna Confi gurations: Quad Port and Dual Slant antennas 65 and 90 degree sector antennas Omni antennas Antennas with Manual Electric Tilt (MET)
Dimensions (L x W x D): 41 x 35 x 15.5 cm / 16 x 13.8 x 6.1 in.
Weight (Typical): 17 kg / 37.5 lb
Power Consumption (Typical): 250 Watts (frequency dependent)
Operating Temperature Range: -40C to 55C / -40F to 131F
IP Rating: IP66
Integrated LTE multi-platform eNodeBexceeding the extremes in cost-effi ciency
About AirspanWith over 500 customers in over
100 countries and as a top vendor
for carrier-class broadband wireless
solutions, Airspan is recognized
as a leader and pioneer in 4G and
broadband wireless technologies.
Providing an expansive product
portfolio, Airspan off ers customers the
widest selection of 4G products in the
industry with an unsurpassed level of
technology to benefi t their business
case. Airspan has solutions spanning
the 700 MHz to 6 GHz frequency bands.
Contact Airspan today!
Airspan has sales offi ces in the following countries
For more information about Airspan, its products
and solutions, please visit our web site:
www.airspan.com
or email:
Headquarters
777 Yamato Road, Suite 310 Boca Raton, Florida 33431USA
A-A4GLTE-0913
Finland
Poland
Russia
United Kingdom
United States
Australia
India
Indonesia
Philippines
Sri Lanka
Dubai
Compact, cost-optimized Pico wireless base station solution for licensed and unlicensed bands
Air4GpPower and Functionality in a Pico Cell
All-in-one, all-outdoor,compact, effi cient, pico cell solution.
Air4Gp
Airspan Networks has a comprehensive suite of 4G products, enabling carriers and industrial network operators to access the equipment they need to best and most effi ciently run their networks. With Airspan, reliable connectivity is delivered where it is needed most. With a combination of pico, micro and macro base stations, operators can deploy the right broadband wireless network equipment, at the right location, at the right price.
Air4Gp is one of the newer products in the Air4G
family. Off ering high-performance in a fl exible pico
form factor, Air4Gp enables operators to deploy 4G
networks in both licensed and unlicensed bands.
Air4Gp is an all-outdoor, all-in-one, small, light form
factor that operates at an extremely attractive cost-to-
performance ratio.
Air4Gp comprises two built-in radios, both with dual
MAC/PHY capabilities. As such, it can support up to
four carriers that can be deployed to cover a single
sector or two distinct sectors. The pico cell base station
is built to overcome harsh interference conditions
with its 4x4 MIMO capability. The transmit power of
the Air4Gp is designed to fully comply with unlicensed
band regulations.
High Performance, Small Package
Air4Gp, as is the entire Air4G family, is an all-outdoor base
station supporting both 3GPP LTE and IEEE mobile WiMAX
platforms. The Air4Gp, allows operators to have several
very fl exible deployment options for running on up to 20
MHz channels and operating either 4G LTE, WiMAX or both
simultaneously.
Air4Gp is designed to easily integrate into an existing
Airspan powered network. Leveraging the existing
infrastructure, Air4Gp utilizes the same core network, user
devices and antennas, while being managed through
the same powerful network management system, called
Netspan.
The Air4Gp has an optional built-in antenna, and can
connect up to two external antennas, allowing for versatile
deployment confi gurations. Additionally, Air4Gp operates
with a large selection of Airspan end user devices and
has proven interoperability with units of every type of
form factor including outdoor CPEs, USB dongles, wireless
modems and routers, and indoor CPEs with/without VoIP
and Wi-Fi.
Air4Gp is a software defi ned radio (SDR) product
allowing for simple, software-only updates and
upgrades. The product is an all-in-one, all-outdoor
solution mitigating additional housing and
cooling costs associated with split architecture
infrastructure. This design and its low power
consumption signifi cantly reduce operating and
capital costs.
Cost-Optimized Functionality in a Pico Base Station
Air4Gp has a proven high level of integration with various core
network products, enabling the highest level of control over
the network and traffi c. Air4Gp also has a unique powerful
standalone mode where no ASN gateway or EPC are required.
The standalone mode can be used for fi xed/nomadic
applications when there is no need for true mobility features
such as seamless handover and idle mode support.
Air4Gp has four transmit and receive paths with transmit power
as high as 4x22 dBm, and boasts extensive MIMO capabilities
for both LTE and WiMAX, including link budget and capacity
improvements.
Comprehensive Solution - Heterogeneous Networks
The layering of small base stations into a macro
cell coverage area, enables a signifi cant increase
in data throughput by fi lling in coverage gaps
and addressing actual traffi c distribution where
demand is highest. These combined cell networks
are called heterogeneous networks (HetNets).
Air4Gp is ideal for these networks, delivering
connectivity where needed most, whether at the
macro cell edge or closer to the user base.
Airspan off ers a large selection of base stations to
match the data traffi c demands of any network.
With a HetNet, consisting of a mixture of micro,
pico and macro base stations, an operator can
maximize coverage while minimizing expenses
and improving customer satisfaction.
Air4Gp can be perfectly combined with the Air4G
macro base station and the Air4Gs micro base
station to best optimize a network and off er
an operator comprehensive network coverage,
capacity and functionality. In addition, all base
stations can be managed from the same core
network, incorporating only one network
management solution with minimized core
network components and training.
Air4Gp supports Power over Ethernet (PoE) as its power source for easy connectivity and omitting the need for a power plug. This
allows the unit to pass electrical power safely, along with data, on Ethernet cabling.
This pico base station leverages the most leading-edge technology to incorporate techniques to ensure the most effi cient use of
the frequency band, such as Fractional/Soft Frequency Reuse (FFR/SFR), as well as precise accuracy and synchronization of the
device, through GPS and IEEE1588-2008. Together, the features off ered by the Air4Gp allow for an aff ordable, high-performance
pico base station that provides fl exibility with enhanced coverage and capacity.
RADIO SPECIFICATIONS
PHYSICAL SPECIFICATIONS
RADIO INTERFACE
LTE Version: 3GPP Release 9
WiMAX Version: IEEE 802.16e
Operational Frequency Bands: 150 MHz to 6 GHz (Please contact your regional Airspan sales representative for specifi c frequency inquiries)
Duplex: TDD & FDD
Channel BW
LTE: 1.4, 3, 5, 10, 15, 20 MHz
WiMAX: 3.5, 5, 7, 10 MHz
Dual WiMAX: 2 x 7 & 2 x 10 MHz
Max Transmit Power: 4 x 22 dBm
MCS Support: QPSK, 16-QAM, 64-QAM
Synchronization: GPS & IEEE1588-2008
External Antenna Confi gurations: Dual-slant 65/90 sector antennas, and Dual-slant Omni antennas with Manual Electric Tilt (MET)
Dimensions: 426 x 336 x 128 mm / 16.8 x 13.2 x 5 in
Weight: 10.5 kg / 23.1 lb
Power Consumption: 45 Watts nominal
Operating Temperature Range: -40C to +55C / -40F to 131F
Operating Humidity: 5-95%, non-condensing
IP Rating: IP66
Note: Specifi cations are subject to change without notice and are for information purposes only.
Dual MAC/PHY
4x4 MIMO
Dual sector
4x4 or dual 2x2 options
IP and Ethernet CS (including VLAN tagging/ untagging)
Soft and Fractional Frequency Reuse (SFR/FFR)
Standalone mode
Optional integrated antenna with 16 dBi gain
Small Package, Big PerformanceUncompromised Functionality
KEY FEATURES
About AirspanWith over 500 customers in over
100 countries and as a top vendor
for carrier-class broadband wireless
solutions, Airspan is recognized
as a leader and pioneer in 4G and
broadband wireless technologies.
Providing an expansive product
portfolio, Airspan off ers customers the
widest selection of 4G products in the
industry with an unsurpassed level of
technology to benefi t their business
case. Airspan has solutions spanning
the 700 MHz to 6 GHz frequency bands.
Contact Airspan today!
Airspan has sales offi ces in the following countries
For more information about Airspan, its products
and solutions, please visit our web site:
www.airspan.com
or email:
Finland
Poland
Russia
United Kingdom
United States
Australia
India
Indonesia
Japan
Philippines
Sri Lanka
Dubai
South Africa
Headquarters
777 Yamato Road, Suite 310 Boca Raton, Florida 33431USA
A-A4Gp-0812
Extremely compact, cost-optimized wireless base station solution
Air4GsSmall Package, Big Performance
All-in-one, all-outdoor,compact, cost-optimized solution.
Air4Gs
Airspan is committed to developing the right equipment and technologies to assist customers set up cost-effective networks that can seamlessly run the appropriate applications. Therefore, Airspan has developed the Air4Gs-an extremely compact, cost-optimized solution, which provides operators with uncompromised functionality at a great value for the money.
Air4Gs is a high-performance, all-in-one, all-outdoor,
carrier-grade, 4G compact micro base station. With a
small, thin and light form factor (weighing only
10.5 kg/23.15 lb) and consuming extremely low power
(less than 90 watts), Air4Gs is easy and aff ordable to
install and maintain.
Air4Gs is ideal for Operator and Carrier networks in
suburban and rural environments as well as urban
deployment extensions. The product is also optimized
for vertical applications such as smart grid or
transportation, where there is often a need for a
powerful, cost-eff ective solution.
Air4Gs is available for the 1.4 GHz, 2.3 GHz (WCS band
in the USA) and 3.X GHz bands (supporting the entire
50 MHz in the 3.65 GHz band in USA). Other bands will
become available as business requirements evolve.
Uncompromised Performance
Similar in architecture and built to complement its sister basestation (Air4G), Air4Gs is designed to easily integrate into anexisting Airspan powered network. Leveraging the existinginfrastructure, Air4G utilizes the same core network, userdevices and antennas, while being managed through thesame powerful network management tool, called Netspan.
The particular features incorporated into the design ofAir4Gs, including the Tx power, number of transceivers,and the option of interfaces, off er high performance at anattractive cost, providing operators the functionality theyneed, with appropriate coverage and data rates to support
a healthy business model.
Air4Gs is a mobile WiMAX (IEEE802.16e) Base Station andhas standard R1 and R6 interfaces. Air4Gs operates with alarge selection of Airspan end user devices and has proveninteroperability with units of every type of form factorincluding outdoor CPEs, USB dongles and indoor CPEs with/without VoIP and Wi-Fi. Air4Gs communicates seamlessly with devices loaded with leading chips including those of Sequans, GCT, Beceem and Mediatek.
Air4Gs has a proven high level of integration with variousASN gateways (such as Starent/Cisco and WiChorus/Tellabs)and with various AAA solutions (such as Bridgewater,WiTECH, Juniper and Free Radius). Air4Gs also has a uniquepowerful standalone mode where no ASN gateway isrequired.
Air4Gs is an all-in-one, all-outdoor solution. Thereis no need for an air-conditioned shelter or forIF/optical/CAT5 cables connecting between anindoor unit and outdoor unit (typical to basestations with split architecture). This design andits small power consumption dramatically reduceOPEX and CAPEX.
High Performance Micro Base Station
The standalone mode can be used for fi xed/nomadic
applications when there is no need for true mobility features
such as seamless handover and idle mode support.
Air4Gs has 2Tx2Rx with Tx power as high as 2*33 dBm. It
supports MIMO Matrix A (for better link budget) and MIMO
Matrix B (for doubling the capacity) the selection between
MIMO A and MIMO B is dynamic. It supports other advanced
mobile WiMAX features such as Fractional Frequency Reuse
(FFR).
Comprehensive Solution - Matching Data Traffi c Requirements
In situations where applications demand higher data rates on the uplink, (better link budget ensures higher modulations and therefore higher data rates), four base station receivers may be required and in those cases, another Air4Gs model with four receivers is available. For the longest range and highest capacity needs, Air4G would be a better fi t.
Airspan off ers a large selection of base stations to match the data traffi c demands of any network. With a heterogeneous network, consisting of a mixture of micro, pico and macro base stations, an operator can maximize coverage while minimizing expenses.
Air4Gs can be perfectly combined with Air4G and AirSynergy to best optimize a network and off er an operator comprehensive network coverage, capacity and functionality. In addition, all base stations can be managed from the same core network, incorporating only one network management solution with minimized core network components and training.
Air4Gs WiMAX variants are now available. An LTE version of the product is currently in production and will be commercially available shortly.
Air4Gs supports IP CS and Ethernet CS, either separately or simultaneously, as well as VLAN pass-through, VLAN tagging/
untagging., VLAN-in-VLAN and Management VLAN.
Air4Gs works with Airspans unique VoiceMAXe server providing a carrier-class Voice over IP (VoIP) solution. VoiceMAXe provides
admission control of VoIP calls per sector, providing busy network tone to calls that cannot be accepted. It also supports
emergency calls (such as 911 calls in the USA), prioritizing and ensuring such calls go through while disconnecting standard calls if
there is not enough bandwidth.
RADIO SPECIFICATIONS
PHYSICAL SPECIFICATIONS
RADIO INTERFACE
Operational Frequency Bands: 1.4, 2.3, 3.4-3.5, 3.5-3.6, 3.6-3.7 GHz
Duplex: TDD
Channel BW: 3.5 MHz, 5 MHz, 7 MHz, 10 MHz
Max Transmit Power: 2 x +33 dBm
MCS Support: QPSK, 16-QAM, 64-QAM
Synchronization: GPS
Antenna Confi gurations: Dual Slant antennas, 65 and 90 degrees sector antennas, Omni and Dual Omni antennas, antennas with Manual Elecctric Tilt (MET)
Dimensions: 416 x 336 x 107 mm / 16.4 x 13.2 x 4.2 in
Weight: 10.5 kg / 23 lb
Power Consumption: 110 Watts max, under 90 Watt average (assuming DL/UL ratio of 29/18)
Operating Temperature Range: -40C to +55C / -40F to 131F
IP Rating: IP66
MIMO Matrix A and B IP and Ethernet CS (including VLAN tagging/ untagging) VoiceMAXe support Fractional Frequency Reuse (FFR) Standalone mode Profi le C (working with ASN GW)
Small Package, Big PerformanceUncompromized Functionality
KEY FEATURES
About AirspanWith over 500 customers in over
100 countries and as a top vendor
for carrier-class broadband wireless
solutions, Airspan is recognized
as a leader and pioneer in 4G and
broadband wireless technologies.
Providing an expansive product
portfolio, Airspan off ers customers the
widest selection of 4G products in the
industry with an unsurpassed level of
technology to benefi t their business
case. Airspan has solutions spanning
the 700 MHz to 6 GHz frequency bands.
Contact Airspan today!
Airspan has sales offi ces in the following countries
For more information about Airspan, its products
and solutions, please visit our web site:
www.airspan.com
or email:
Finland
Poland
Russia
United Kingdom
United States
Australia
India
Indonesia
Japan
Philippines
Sri Lanka
Dubai
Headquarters
777 Yamato Road, Suite 310 Boca Raton, Florida 33431USA
A-A4G-0211
Network-in-a-Box Evolved Packet Core (EPC) solution for LTE network operation and management
AirCoreComprehensive LTE Core Network
AirCore provides smooth network connectivity of LTE User Equipment and seamless mobility.
AirCore AirCore EPC eNodeB mobile component fi xed component
Carrier Grade LTE Core Network Solution
The EPC is designed to provide an all-IP, fl at
architecture which provides high throughput and
reduced latency. EPCs reduce costs and support
real-time media-rich services with enhanced
quality of experience while also providing
interworking with legacy 2G/3G networks
connected via SGSN. The EPC controls all of the
components of a 4G network including macro,
micro and pico base stations and the user devices
they communicate with.
The EPC provides enhanced service control and provisioning,
and ensures effi cient use of network resources. The EPC
components provide the functionality of access control,
packet routing and transfer, mobility management, security,
radio resource and network management. The AirCore EPC
is an integrated solution consisting of MME, Serving GW,
PDN GW, HSS and PCRF components, or any combination of
these, providing Network-in-a-box functionality. Airspans
AirCore is a low-footprint LTE mobility platform supporting
from 50 up to 200,000 simultaneous attached subscribers
(active and idle), and off ers one of the best performance-to-
price ratios in the industry. AirCore supports fi xed, mobile
and nomadic subscribers.
Airspans AirCore system is the Long Term Evolution (LTE) Evolved Packet
Core (EPC) enabling intelligent, reliable, rich services and security for
the fourth generation operators. AirCore provides: Support for multiple access network types and interfaces Seamless, fl exible evolution from non-LTE networks End-to-End Quality of Service (QoS) Session and subscriber management Security Voice and data integrity Accurate billing, accounting and reporting Seamless mobility, roaming and handovers Support for multimedia services Proper packet routing and fi ltering
AirCore DifferentiatorsMulti-scenario deployment Support for static, nomadic
and mobile subscribers ranging from 50 to 200,000 in
number.
Low-footprint, low power consumption, scalable LTE
Mobility Platform
Distributed Architecture Flexible licensing and low costs
allows distributed architecture according operator needs
Optimized CapEx Complete EPC network components in
a single Network Element (single binary). Components can
be enabled/disabled as per deployment needs.
Flexible Licensing model based on number of subscribers.
Multiple combinations to serve varied subscriber
ranges
Easily scalable low up-front capital investment;
upscale after building user base
Software-based upgrade model uses same hardware
to support higher number of subscribers
Easy Interoperability Exposes open standard interfaces
enabling quick interoperability with standards-based peer
vendor nodes.
Easy Manageability Network-in-a-Box solution reduces
the complexity of the network layout and presents an easy
to manage device with CLI/SNMP/GUI/Web
Network-in-a-Box
AirCore is a state-of-the-art family of products, enabling the comprehensive management and operation of LTE networks.
AirCore supports a wide range of networks including very small, rural networks; large, urban networks; specialized industrial applications; or anything in between.
AirCore is a single component which integrates a large number of capabilities to fully manage the functionality of every aspect of a mobile, wireless network. All EPC modules can be located in a single box or separated according to network operator requirements.
AirCore enables system management including fault management, confi guration, monitoring, performance and security. It is an easily scalable, seamless EPC solution to fi t the needs of any LTE network operator.
AirCore distributed EPC Architecture
HSS (Home Subscriber Server): is a central database that contains user and subscription-related information. HSS stores user parameters, information to authenticate the subscriber and the services a user is allowed. It also contains the subscriber profi le such as QoS profi le, access restriction and roaming capabilities. The HSS may include an Authentication Center (AuC) which generates authentication vectors and security keys.
SGW (Serving Gateway): routes and forwards user data packets, while also acting as the mobility anchor for the user plane during inter-eNodeB handovers and as the anchor for mobility between LTE and other 3GPP technologies. It retains information about the bearers when the UE (User Equipment) is in idle mode. It manages and stores UE contexts, e.g. parameters of the IP bearer service, network internal routing information. It also performs replication of the user traffi c in case of lawful interception. Network may include several Serving Gateways, each handling diff erent data bearers at diff erent times.
PGW (PDN Gateway): provides connectivity from the UE to external packet data networks by being the point of exit and entry of traffi c for the UE. The PGW performs policy enforcement, packet fi ltering,
charging support, lawful interception and packet screening. Another key role is to act as the anchor for mobility between 3GPP and non-3GPP technologies such as WiMAX and 3GPP2 (CDMA 1X and EvDO).
MME (Mobility Management Entity): The MME is the key control-node for the LTE access-network that processes signalling between the UE and the core network. It manages establishment, maintenance and release of bearers and the connection, authentication (by interacting with the HSS) and security between the UE and the network. The MME Performs mobility management, like tracking UE location and handover, and manages subscription profi le and service connectivity. It checks the authorization of the UE and enforces UE roaming restrictions.
PCRF (Policy and Charging Rules Function): performs QoS, access and charging related control. The PCRF is policy based and authorizes bearer and session establishment and modifi cation. Only one PCRF is assigned to all the connections of one subscriber, has access to subscriber profi les stored in a database, and provides the QoS authorization (for QoS class and bit rates) that determines the data fl ow and ensures it is in accordance with the users subscription profi le.
THE EPC CONSISTS OF THE FOLLOWING SUBCOMPONENTS:
AirCore Models
AirCore 10xx - For small deployments up to 5k subscribersStandard Server
Dual Power Supply
1 GB Interface
Redundancy support
AirCore 20xx - For medium deployments of 6k-20k subscribers2U carrier grade rack mount server
NEBS-3 / ETSI Compliant
Long life support
Dual AC or DC power option
Short depth, ruggedized chassis
Telco alarms
3rd party hardware RAID option
Redundancy support
10 GB Interface
S1-MME (eNodeB and MME) S1-U (eNodeB and S-GW) S1-C (MME and eNodeB) S5/S8 (S-GW toward P-GW) S6a (MME and HSS)
AirCore 30xx - For large deployments of >20kaTCA Shelf (2, 6 or 14 Slots)
Data processing cards
N+1 Data processing card redundancy
One or two shelf manager, one or two switches
RTM for 1GbE, 10GbE and Telco clock support
NEBS-3 / ETSI compliant
Long life support
Two redundant DC power entry modules (PEM) - (-40V to -72V DC)
Telco alarms (fuse failure, reverse voltage indicator, etc)
4 x hot-swappable fans, front to rear cooling
10 GB Interface per blade
Interfaces
S8 (S-GW in VPLMN and P-GW in HPLMN) S10 (between MMEs) S11 (MME and S-GW) SGi (P-GW and packet data network) Rx (PCRF towards AF)
Gx (PGW towards PCRF) Gz (SGW/PGW towards CDF) Gn (PGW [functioning as GGSN[ to SGSN)
COMPONENT FEATURES (RELEASE 10 COMPLIANT)
MME Features IPv4/IPv6/IPv4v6 PDN Type
Default & Dedicated bearer establishment
Multiple sessions for each IMSI (Max 11 bearers per session)
Ciphering and Integrity Protection of NAS messages
UE Attach & Detach [UE initiated]
PDN Connectivity & Disconnect [UE initiated]
PGW & SGW selection
Handover - X2, S1, inter-SGW, inter-MME
Service Requests and S1 Release (exit and enter idle-mode)
Tracking Area Update - no MME/SGW change, only SGW change, MME & SGW Change [UE initiated]
Network initiated disconnect & detach [PGW initiated bearer release, HSS initiated subscription withdrawal]
System and Subscriber Tracing
Lawful Intercept
EMS with web based local/remote management
PGW and SGW FeaturesUTRAN/GERAN/GPRS Network Support
Multiple session, Multiple bearer support
- IPv4, IPv6, IPv4v6 UE address
- IPv4, IPv6, IPv4v6 UE address
Lawful Intercept
Default & Dedicated bearers
SNMP v2/v3 Management
Lightweight data path (common with SGW when collocated)
PCRF Features LTE & 3G deployment
Policy management
IPv4/IPv6 signalling
UE IP address with IPv4 and IPv6
System and Subscriber Tracing
Alarms
Dynamic policy through AF
Multi operator support
Flexible policy control
LTE and GGSN policy control
Open interface for customer specifi c additional policy control
Open interface for DPI based policy control
Policy rules delivery to PCEF
GBR and non-GBR bearers
Default and Dedicated bearers
PGW Features
Combined PGW+GGSN functionality
Dynamic Policy - fi lters, screening and bit rate based on allocation from PCRF
Static/Dynamic policy support
Offl ine Charging
UE and network initiated dedicated bearers
Static/Dynamic IP addresses allocation from local confi gured IP pools or external DHCP server (IPv4/IPv6)
Volume and Time based Online Charging (Rel 2)
Quota Time Management
S-GW Features
UE Initiated Bearer Resource Requests
Online/Offl ine charging
Tracking Area Update support
SGW handover support
Security: IPSEC through pre-shared keys on S11, S5/S8, Gz
Operator confi guration of charging support for home, visited and roamed subscribers
Multiple Data path support with single control plane System and Subscriber Tracing
HSS Features Operator confi guration of APN Profi le, IMSI profi le, IMSI data
Pure LTE deployment (non IMS support)
White list of roaming partners (PLMN-ID)
Location query of subscriber using dynamic update locations
AKA based authentication (key generation and distribution)
Persistent storage in secondary database
Multiple operator support (using unique PLMN-ID)
Subscriber Bulk Confi guration
Scalable Architecture
System Tracing
Management Interface
CLI
C Based APIs
Web-Based Interface
About AirspanWith over 500 customers in over
100 countries and as a top vendor
for carrier-class broadband wireless
solutions, Airspan is recognized
as a leader and pioneer in 4G and
broadband wireless technologies.
Providing an expansive product
portfolio, Airspan off ers customers the
widest selection of 4G products in the
industry with an unsurpassed level of
technology to benefi t their business
case. Airspan has solutions spanning
the 700 MHz to 6 GHz frequency bands.
Contact Airspan today!
Airspan has sales offi ces in the following countries
For more information about Airspan, its products
and solutions, please visit our web site:
www.airspan.com
or email:
Headquarters
777 Yamato Road, Suite 310 Boca Raton, Florida 33431USA
A-AC-0912
Finland
Poland
Russia
United Kingdom
United States
Australia
India
Indonesia
Japan
Philippines
Sri Lanka
Dubai
South Africa
AirSynergy 1000Indoor LTE-Advanced Enterprise Femto Base Station with optional Wireless Backhaul
Multi-Function, High Performance and Economic Extending LTE-Advanced Public Access to the Enterprise
The worlds
highest
performance
LTE-Advanced
Enterprise Femto
AirSynergy
Addressing unprecedented mobile data traffi c growth
Mobile Carriers are currently experiencing an unprecedented
growth in mobile data traffi c, which todays 3G and 4G LTE networks
are struggling to satisfy.
As part of a heterogeneous network, Public Access
Enterprise Femto cells are a key tool for locating
the eNodeB closer to the end user, providing much
higher aggregate data rates and better coverage.
The issue with most Public Access Enterprise
Femtos is the diffi culty in connecting them with
the rest of the Macro network. AirSynergy 1000
solves this problem by combining a 4G LTE-
Advanced eNodeB Station with an optional, high
capacity, self-connecting wireless backhaul.
AirSynergy 1000 contains Airspans ground breaking LTE-
Advanced Software Defi ned Radio (SDR) is implemented
within a state-of-the-art System on a Chip technology
providing both data access and backhaul from the same
architecture. AirSynergy is a high compact all-in-one eNodeB
which supports a wide range of radio interfaces including 4G
LTE-Advanced and IEEE 802.11 and 802.16 technologies.
This architecture enables AirSynergy 1000 femto cells to
be deployed quickly into the Enterprise by delivering both
high capacity backhaul and synchronization, essential for
integration with the Macro cell network.
In addition to LTE-Advanced Public Access, AirSyenrgy 1000
also provides IEEE 802.11n/ac Public Hotspot 2.0 services
which are tightly coupled with the LTE interface and share the
same hardware based SIM authentication methods used on
todays Smartphones and Tablets. When combined with novel
access network discovery and selection function (ANDSF) the
result is a revolution in the way a carrier can provide services
to todays enterprise.
A holistic solution for both Public Access and high capacity backhaul is an industry fi rst, and redefi nes the way in which LTE-Advanced can be delivered into the Enterprise.
Integrating and Synchronizing
RELEASE 10 LTE-ADVANCEDAirSynergy 1000 is a revolutionary indoor, high
performance, high power, LTE-Advanced Enterprise
Femto cell, designed to bring Public Access LTE networks
to large enterprises. AirSynergy 1000 has advanced
Release 10 feature sets that include support for SON and
eICIC which enables N=1 frequency re-use with outdoor
Macro and Pico cells. AirSynery 1000 can be deployed
using enterprise broadband connections or with an
optional broadband wireless backhaul solution that has
cooperative QoS to ensure the Quality of Experience
(QoE) inside of the enterprise matches the QoE on the
outdoor Macro cell network.
THE POWER OF INDOOR HETNETS4th generation mobile cellular networks have diff erent
problems than previous 2G and 3G networks. 4G
LTE mobile networks are full of hotspots where large
numbers of users make demands for mobile data that
Macro-only networks are failing to provide. AirSynergy
1000 is designed to solve this Hotspot issue by bringing
cost eff ective LTE-Advanced Public Access into the
enterprise.
LTE-ADVANCED ACCESSAirSynergy 1000 supports 3GPP LTE access technologies
in combination with Airspans intelligent IEEE wireless
backhaul technology, known as iBridge. Airspans
3GPP LTE implementation is compliant with the 3GPP
standards and has interoperable S1 and X2 interfaces,
SIMPLE AND FAST TO DEPLOY
AirSynergy 1000 when combined with the optional iBridge wireless backhaul provides a one-stop solution for extending LTE and LTE-Advanced Public Access services into a large enterprise using the deployment of just two compact units.
and fully supports commercial GCF tested UE devices,
including SmartPhones, Dongles and Tablet computers.
OPTIONAL WIRELESS BACKHAULAirSynergy 1000 uniquely provides a solution for the
delivery of trusted high capacity wireless backhaul
to the enterprise using Airspans IEEE based iBridge
backhaul technology. iBridge is a self-confi guring,
self-connecting point-to-multipoint backhaul solution,
which automatically extends the reach of the Macro
RAN backhaul network from existing Macro cell sites or
other Points of Interconnect (POI). AirSynergy iBridge
backhaul also provide high quality synchronization
using IEEE PTPv2 by acting as a Grand Master for the
enterprise deployed Femto cells. This ensures that both
frequency re-use and handover works seamlessly with
the Macro LTE-Advanced network.
ECONOMIC DEPLOYMENTThe high performance and high power LTE-Advanced
radio interface of AirSynergy 1000 means that in most
cases a single unit can provide coverage for a large
building or even multiple buildings in a campus.
PLUG AND PLAYAirSynergy 1000 wall mounted Enterprise Femto cell(s) can be installed
quickly into large enterprises, either as a single node or as a cluster of
nodes. When deployed in clusters, the nodes are networked together
using Gigabit ethernet links. The AirSynergy 1000 can be deployed
using an integrated isotropic omni antenna, or with separate antennas
via 2 N-type connectors.
REDUCING THE COST OF DELIVERING Mbit/s The deployment of an AirSynergy 1000 Enterprise Femto cell with
optional backhaul can massively reduce the cost of delivering Public
Access broadband mobile data to the Enterprise. The location of a high
performance Femto cell inside of the enterprise not only improves the
Quality of Experience, by enabling fast downloads and better coverage,
it simultaneously deloads the outdoor Macro cell network, improving
the overall network quality for all users. Perhaps even more signifi cant
is that the cost for each Mbit/s delivered to users within the Enterprise
drops dramatically, which permits carriers to create innovative pricing
tariff s and generous data consumption allowances.
FLEXIBLE ARCHITECTUREAirSynergy 1000 and 2000 support the holistic deployment of LTE-
Advanced HetNets. By deploying both Indoor and Outdoor small
cell topologies, carriers can create optimal small cell networks that
solve both coverage and capacity shortfalls in the Macro cell network
Through the use of Airspans real-time SON Servers, LTE and iBridge
backhaul does continual self-optimization of both LTE backhaul links,
ensuring interference between is minimized and delivering end-to-end
QoS and QoE across the network with minimal spectrum consumption.
RADIO PLANNING with SON
AirSynergy 1000 is designed to integrate with standardized LTE Access SON solutions. AirSynergy SON is layered and consists of both Integrated eNodeB SON technology, based on Qualcomms UltraSON and a standardized SON interface (which support TR.69) for network based SON. When deployed using iBridge backhaul AirSynergy also integrates Backhaul SON into the LTE SON Framework. This allows a network to be optimized for both LTE access and Backhaul simultaneously without the need for extensive, formal planning.
The products self-confi gure, self-connect, and self-optimize. In addition, unlike conventional mobile network planning and design, expansion of the coverage area can be optimized and adapted depending on the local need.
3GPP LTE-Advanced ACCESS SPECIFICATIONS
IEEE iBridge BACKHAUL SPECIFICATIONS
RADIO INTERFACE
Version: Release 8,9 and 10 Feature SetsOperational Frequency Bands: Band 7 and 41 (2.6 GHz) Band 12, 13, 14 and 17 (700 MHz) Band 20 (800 MHz) Band 40 (2.3-2.4 GHz) Band 42 and 43 (3.4-3.8 GHz) Band 3 (1.7-1.8 GHz) Band 44 (700 MHz) Band 4 (1.7-2.1 GHz*) Band 25 (1.9 GHz*) Band 5 (850 MHz*) Band 1 (1.9-2.1 GHz*)
Duplex: FDD & TDDMax Channel BW: 20 MHzMax Transmit Power: +30 dBm per TxMCS Support: Up to 64-QAMSynchronization: GNSS(GPS) & IEEE1588 PTPv2
iBridge RADIO INTERFACE
Operational Frequency Bands: Various (between 400 MHz and 6 GHz)Duplex: TDDInterface: Layer 2 Ethernet or internalMIMO Streams: IEEE 802.16 (2 x 2), 802.11 (3 x 3 or 4 x 4)MIMO Modes: Downlink and Uplink, Spatial Multiplexing & STCIEEE Standard: 802.11 and/or 802.16 (both in Augmentation mode)Max Channel BW: 10, 20, 40 and 80 MHz (160 MHz*)Max Output Power: Up to +30dBm per TxMCS Support: Up to 256-QAM rate 5/6
KEY FEATURES
Advanced Antenna Techniques 2 x 2 MIMO: SM and TxD SU-MIMO MU-MIMO
System Features Inter-RAT Mobility RAN Sharing Automatic Neighbor Relation (ANR) eICIC, ABS and CRE Embedded SON
*In Roadmap
IEEE Broadband Wireless ACCESS SPECIFICATIONS
PHYSICAL SPECIFICATIONS
WIDE-AREA RADIO INTERFACE: 802.16d and 802.16e
Operational Frequency Bands: 700 MHz to 6.4 GHzDuplex: TDDMIMO: 2 x 2 with Matrix A & BMax Channel BW: 10 MHz Max Transmit Power: +30dBm per TxMCS Support: Up to 64-QAM rate 5/6
LOCAL-AREA RADIO INTERFACE: 802.11n and 802.11ac
Operational Frequency Bands: 2.4 GHz and 5 GHzDuplex: TDDMIMO: 3 x 3 or 4 x 4Max Channel BW: 20, 40, 80 and 160 MHzMax Transmit Power: +24dBm per TxMCS Support: Up to 256-QAM rate 5/6
eNode/BS Confi gurations: Single, Dual and Triple RF Node Options 3GPP plus IEEE 802.11Antenna Confi gurations: X-Polar Omni X-Polar Smart Switching Directional X-Polar SectoredSite Confi gurations: Access (with or without iBridge Backhaul)*Dimensions: 320 x 280 x 80 mm / 12.5 x 11 x 3.1 in.*Weight: 4 kg / 8.8 lb*Power Consumption:
About AirspanWith over 1000 customers in over
100 countries and as a top vendor for
carrier-class 3GPP and IEEE broadband
wireless solutions, Airspan is recognized
as a leader and pioneer in 3GPP and
IEEE broadband wireless technologies.
Providing an expansive product
portfolio, Airspan off ers customers the
widest selection of 4G LTE products in
the industry with an unsurpassed level
of technology to benefi t their business
case. Airspan has solutions spanning
the 700 MHz to 6.4 GHz frequency
bands.
Contact Airspan today!
Airspan has sales offi ces in the following countries
For more information about Airspan, its products
and solutions, please visit our web site:
www.airspan.com
or email:
Finland
Poland
Russia
United Kingdom
United States
Australia
India
Indonesia
Japan
Philippines
Sri Lanka
UAE
South Africa
Headquarters
777 Yamato Road, Suite 310 Boca Raton, Florida 33431USA
AirSynergy 2000 rev. I
AirSynergy 2000Outdoor LTE-Advanced Pico Base Station with Integrated Wireless Backhaul
Multi-Function, Compact and Versatile Redefi ning the economics of LTE-Advanced HetNet Deployment
The worlds most compact and versatile 4G LTE Pico Base Station
AirSynergy
Addressing unprecedented mobile data traffi c growth
Mobile Carriers are currently experiencing an unprecedented
growth in mobile data traffi c, which todays 3G and 4G LTE networks
are struggling to satisfy.
As part of a heterogeneous network, Pico Base
Stations are located closer to the end user,
providing much higher aggregate data rates.
The issue with most Pico Base Stations is the
diffi culty in connecting them with the rest of
the network. AirSynergy solves this problem
by combining a 4G Pico Base Station with an
integrated, high capacity, self-connecting wireless
backhaul.
AirSynergy is Airspans groundbreaking Pico base station
using Software Defi ned Radio (SDR) technology, providing
both data access and wireless backhaul from the same unit.
AirSynergy is an all-in-one compact Pico Base Station which
supports a wide range of radio interfaces including 4G LTE
and WiMAX technologies.
This technique enables AirSynergy to be deployed on street
furniture (e.g. lamp posts), with connections automatically
established through neighboring nodes to establish a
backhaul connection with the network.
A key feature of the AirSynergy technology is the ability
to self-confi gure, self-connect, self-heal and self-optimize
when deployed as a network of elements. At the same time
AirSynergy provides guaranteed levels of service with Quality
of Service (QoS) characteristics in line with the requirements
of the access interface
The integration of backhaul and access technologies is an industry fi rst, and redefi nes the way in which networks
can be constructed.
LTE CORE
IEEE and 3GPP Access
Network Architecture Diagram
RELEASE 10 LTE-ADVANCEDAirSynergy 2000 provides the outdoor Pico layer of a
Heterogeneous LTE-Advanced network deployment
(HetNet). Advanced Release 10 feature sets include
support for SON and eICIC which enables N=1 frequency
re-use with the Umbrella Macro cell. The cooperative
QoS over the Backhaul interface ensures the Quality of
Experience (QoE) from the Pico eNodeB matches the
experience from the Macro cell.
THE POWER OF HETNETSAs operators struggle to cope with growing customer
demand for higher throughput, they are discovering that
layering small base stations into a macro cell coverage
area, enables a signifi cant increase in network capacity
by fi lling in coverage gaps and addressing actual traffi c
distribution where demand is highest. AirSynergy 2000
is ideal for these networks, delivering high data rates
where needed most, whether at the macro cell edge
or closer to the user base, maximizing coverage and
customer satisfaction.
BROADBAND ACCESSAirSynergy 2000 supports either 3GPP LTE or IEEE
Broadband access technologies in combination with
Airspans intelligent IEEE wireless backhaul technology,
known as iBridge. AirSynergy supports both IEEE 802.11
and IEEE 802.16 radio interfaces and provides both local
and wide-area broadband services. Airspans 3GPP LTE
implementation is compliant with the 3GPP standards
ALL-IN-ONE SOLUTION
AirSynergy consists of a single self-contained unit, removing the need for an equipment rack or any indoor equipment. Units are powered from a compact power supply unit based on AC or -48V DC power sources
and has interoperable S1 and X2 interfaces and
supports commercial GCF tested UE devices, including
SmartPhones, Dongles and Tablet computers.
AirSynergy uses a unqiue combination of Software
Defi ned Radio (SDR) and System-on-a-Chip (SoC)
technologies to enable it to support a range of air
interfaces simulatenaously.
INTEGRATED WIRELESS BACKHAULAirSynergy 2000 uniquely provides an integrated
wireless backhaul solution using Airspans iBridge
IEEE P802.16r technology. iBridge is a self-confi guring,
self-connecting point-to-multipoint backhaul solution,
which automatically extends the reach of the network
from existing Points of Interconnect (POI). iBridge
supports multi-hop relay connections, providing
backhaul for either LTE or IEEE access interfaces.
SUSTAINABLE DEPLOYMENTAirSynergy 2000 Pico Cells can be installed on existing
street poles (lamp posts or utility poles) which are
either OPEX free, or have nominal on-going expenses,
thus avoiding the recurring costs associated with a
traditional Macro site acquisition. AirSynergy also
requires a fraction of the power of a Macro base station,
further reducing the OPEX, and allowing renewable
energy sources, such as solar panels, to be used.
PLUG AND PLAYAirSynergy 2000 supports automated confi guration from the
management system, simplifying the installation of each base station.
Airspans unique self-aligning Antenna technology cuts installation
time. This automation, coupled with the self-connecting iBridge
backhaul results in a true plug and play solution, allowing Pico cells to
be rapidly deployed.
REDUCED CAPEX / OPEXAirSynergy 2000 is a compact all-outdoor 3GPP LTE Pico Base Station,
which can be installed without conventional indoor infrastructure
and associated power and air-conditioning systems. The integration
of wireless backhaul reduces the equipment installed per site, as
separate backhaul infrastructure is not required. This in turn reduces
spares holding and inventories. The iBridge backhaul supports self
healing, allowing the network to automatically recover in the event
of failure. This increases overall service availability and customer
satisfaction.
FLEXIBLE ARCHITECTUREThe iBridge network can support diff erent topologies as new
elements are added to the network, enabling a highly fl exible and
versatile deployment. Each AirSynergy 2000 node can adopt an
access and backhaul functionality, automatically changing backhaul
role from termination to relay to ensure a dynamic self-adapting
architecture.
Through the use of Airspans real-time iBridge SON Server, iBridge
supports self-continuous optimization of backhaul links, ensuring
interference between iBridge nodes is minimized and delivering end-
to-end QoS across the network with minimal spectrum consumption.
RADIO PLANNING with SON
AirSynergy is designed to integrate with standardized LTE Access SON solutions. AirSynergy SON is layered and consists of both Integrated eNodeB SON technology, based on Qualcomms UltraSON and a standardized SON interface (which supoport TR. 69) for network based SON. When deployed using iBridge backhaul AirSynergy also integrates Backhaul SON into the LTE SON Framework. This allows a network to be optimized for both LTE access and Backhaul simultaneously without the need for extensive, formal planning.
The products self-confi gure, self-connect, and self-optimize. In addition, unlike conventional mobile network planning and design, expansion of the coverage area can be optimized and adapted depending on the local need.
3GPP LTE-Advanced ACCESS SPECIFICATIONS
IEEE iBridge BACKHAUL SPECIFICATIONS
RADIO INTERFACE
Version: Release 8,9 and 10 Feature SetsOperational Frequency Bands: Band 7 and 41 (2.6 GHz) Band 12, 13, 14 and 17 (700 MHz) Band 20 (800 MHz) Band 40 (2.3-2.4 GHz) Band 42 and 43 (3.4-3.8 GHz) Band 3 (1.7-1.8 GHz) Band 44 (700 MHz) Band 4 (1.7-2.1 GHz*) Band 25 (1.9 GHz*) Band 5 (850 MHz*) Band 1 (1.9-2.1 GHz*)
Duplex: FDD & TDDMax Channel BW: 20 MHzMax Transmit Power: +30 dBm per TxMCS Support: Up to 64-QAMSynchronization: GNSS(GPS) & IEEE1588 PTPv2
iBridge RADIO INTERFACE
Operational Frequency Bands: Various (between 400 MHz and 6 GHz)Duplex: TDDInterface: Layer 2 Ethernet or internalMIMO Streams: IEEE 802.16 (2 x 2), 802.11 (3 x 3 or 4 x 4)MIMO Modes: Downlink and Uplink, Spatial Multiplexing & STCIEEE Standard: 802.11 and/or 802.16 (both in Augmentation mode)Max Channel BW: 10, 20, 40 and 80 MHz (160 MHz*)Max Output Power: Up to +30dBm per TxMCS Support: Up to 256-QAM rate 5/6
KEY FEATURES
Advanced Antenna Techniques 2 x 2 MIMO: SM and TxD SU-MIMO MU-MIMO
System Features Inter-RAT Mobility RAN Sharing Automatic Neighbor Relation (ANR) eICIC, ABS and CRE Embedded SON
*In Roadmap
IEEE Broadband Wireless ACCESS SPECIFICATIONS
PHYSICAL SPECIFICATIONS
WIDE-AREA RADIO INTERFACE: 802.16d and 802.16e
Operational Frequency Bands: 700 MHz to 6.4 GHzDuplex: TDDMIMO: 2 x 2 with Matrix A & BMax Channel BW: 10 MHz Max Transmit Power: +30dBm per TxMCS Support: Up to 64-QAM rate 5/6
LOCAL-AREA RADIO INTERFACE: 802.11n and 802.11ac
Operational Frequency Bands: 2.4 GHz and 5 GHzDuplex: TDDMIMO: 3 x 3 or 4 x 4Max Channel BW: 20, 40, 80 and 160 MHzMax Transmit Power: +24dBm per TxMCS Support: Up to 256-QAM rate 5/6
eNode/BS Confi gurations: Single, Dual and Triple RF Node Options 3GPP plus IEEE 802.11 and IEEE 802.16Antenna Confi gurations: X-Polar Omni X-Polar Smart Switching Directional X-Polar Sectored Quad X-Polar SectoredSite Confi gurations: Omni Access (with or without iBridge Backhaul) Multi-sector (with or without iBridge Backhaul) Single-sector (with or without iBridge Backhaul) iBridge Relay (with or without Access) iBridge Base*Dimensions: 530 x 134 x 85 mm / 20.8 x 5.2 x 3.3 in.*Weight: 5.5 kg / 12 lb*Power Consumption: 1 GHz
About AirspanWith over 1000 customers in over
100 countries and as a top vendor for
carrier-class 3GPP and IEEE broadband
wireless solutions, Airspan is recognized
as a leader and pioneer in 3GPP and
IEEE broadband wireless technologies.
Providing an expansive product
portfolio, Airspan off ers customers the
widest selection of 4G LTE products in
the industry with an unsurpassed level
of technology to benefi t their business
case. Airspan has solutions spanning
the 700 MHz to 6.4 GHz frequency
bands.
Contact Airspan today!
Airspan has sales offi ces in the following countries
For more information about Airspan, its products
and solutions, please visit our web site:
www.airspan.com
or email:
Finland
Poland
Russia
United Kingdom
United States
Australia
India
Indonesia
Japan
Philippines
Sri Lanka
UAE
South Africa
Headquarters
777 Yamato Road, Suite 310 Boca Raton, Florida 33431USA
AirSynergy 2000 rev. I
AirSynergy 3000High Capacity Outdoor LTE-Advanced Pico Base Station with Integrated Wireless Backhaul and Carrier Wi-Fi
Multi-Function, Compact and Versatile Redefi ning the economics of LTE-Advanced HetNet Deployment
PRELIMINARY PRODUCT BRIEFING
AirSynergy
The worlds most compact and versatile 4G LTE Pico Base Station
Addressing unprecedented mobile data traffi c growth
Mobile Carriers are currently experiencing an unprecedented
growth in mobile data traffi c, which todays 3G and 4G LTE networks
are struggling to satisfy.
As part of a heterogeneous network, Pico Base
Stations are located closer to the end user,
providing much higher aggregate data rates.
The issue with most Pico Base Stations is the
diffi culty in connecting them with the rest of
the network. AirSynergy solves this problem
by combining a 4G Pico Base Station with an
integrated, high capacity, self-connecting wireless
backhaul.
AirSynergy is Airspans groundbreaking Pico base station
using Software Defi ned Radio (SDR) technology, providing
both data access and wireless backhaul from the same unit.
AirSynergy is an all-in-one compact Pico Base Station which
supports a wide range of radio interfaces including 4G LTE
and WiMAX technologies.
This technique enables AirSynergy to be deployed on street
furniture (e.g. lamp posts), with connections automatically
established through neighboring nodes to establish a
backhaul connection with the network.
A key feature of the AirSynergy technology is the ability
to self-confi gure, self-connect, self-heal and self-optimize
when deployed as a network of elements. At the same time
AirSynergy provides guaranteed levels of service with Quality
of Service (QoS) characteristics in line with the requirements
of the access interface
The integration of backhaul and access technologies is an industry fi rst, and redefi nes the way in which networks
can be constructed.
LTE CORE
IEEE and 3GPP Access
Network Architecture Diagram
RELEASE 10 LTE-ADVANCEDAirSynergy 3000 provides the outdoor Pico layer of a
Heterogeneous LTE-Advanced network deployment
(HetNet). Advanced Release 10 feature sets include
support for SON and eICIC which enables N=1 frequency
re-use with the Umbrella Macro cell. The cooperative
QoS over the Backhaul interface ensures the Quality of
Experience (QoE) from the Pico eNodeB matches the
experience from the Macro cell.
THE POWER OF HETNETSAs operators struggle to cope with growing customer
demand for higher throughput, they are discovering that
layering small base stations into a macro cell coverage
area, enables a signifi cant increase in network capacity
by fi lling in coverage gaps and addressing actual traffi c
distribution where demand is highest. AirSynergy 3000 is
ideal for these networks, delivering high data rates where
needed most, whether at the macro cell edge or closer
to the user base, maximizing coverage and customer
satisfaction.
BROADBAND ACCESSAirSynergy 3000 supports either 3GPP LTE or IEEE
Broadband access technologies in combination with
Airspans intelligent IEEE wireless backhaul technology,
known as iBridge. AirSynergy 3000 also supports
both IEEE 802.11ac and IEEE 802.16r radio interfaces
for backhaul. Airspans 3GPP LTE implementation is
compliant with the 3GPP standards and has interoperable
ALL-IN-ONE SOLUTION
AirSynergy consists of a single self-contained unit, removing the need for an equipment rack or any indoor equipment. Units are powered from a compact power supply unit based on AC or -48V DC power sources
S1 and X2 interfaces and supports commercial GCF
tested UE devices, including SmartPhones, Dongles and
Tablet computers.
AirSynergy uses a unqiue combination of Software
Defi ned Radio (SDR) and System-on-a-Chip (SoC)
technologies to enable it to support a range of air
interfaces simulatenaously.
INTEGRATED WIRELESS BACKHAULAirSynergy 3000 uniquely provides an integrated
wireless backhaul solution using Airspans iBridge
IEEE P802.16r and LTE Relay technology. iBridge is a
self-confi guring, self-connecting point-to-multipoint
backhaul solution, which automatically extends
the reach of the network from existing Points of
Interconnect (POI). iBridge supports multi-hop relay
connections, providing backhaul for either LTE or IEEE
access interfaces.
SUSTAINABLE DEPLOYMENTAirSynergy 3000 Pico Cells can be installed on existing
street poles (lamp posts or utility poles) which are
either OPEX free, or have nominal on-going expenses,
thus avoiding the recurring costs associated with a
traditional Macro site acquisition. AirSynergy also
requires a fraction of the power of a Macro base station,
further reducing the OPEX, and allowing renewable
energy sources, such as solar panels, to be used.
PLUG AND PLAYAirSynergy 3000 supports automated confi guration from the
management system, simplifying the installation of each base station.
Airspans unique self-aligning Antenna technology cuts installation
time. This automation, coupled with the self-connecting iBridge
backhaul results in a true plug and play solution, allowing Pico cells to
be rapidly deployed.
REDUCED CAPEX / OPEXAirSynergy 3000 is a compact all-outdoor 3GPP LTE Pico Base Station,
which can be installed without conventional indoor infrastructure
and associated power and air-conditioning systems. The integration
of wireless backhaul reduces the equipment installed per site, as
separate backhaul infrastructure is not required. This in turn reduces
spares holding and inventories. The iBridge backhaul supports self
healing, allowing the network to automatically recover in the event
of failure. This increases overall service availability and customer
satisfaction.
FLEXIBLE ARCHITECTUREThe iBridge network can support diff erent topologies as new
elements are added to the network, enabling a highly fl exible and
versatile deployment. Each AirSynergy 3000 node can adopt an
access and backhaul functionality, automatically changing backhaul
role from termination to relay to ensure a dynamic self-adapting
architecture.
Through the use of Airspans real-time iBridge SON Server, iBridge
supports self-continuous optimization of backhaul links, ensuring
interference between iBridge nodes is minimized and delivering end-
to-end QoS across the network with minimal spectrum consumption.
RADIO PLANNING with SON
AirSynergy is designed to integrate with standardized LTE Access SON solutions. AirSynergy SON is layered and consists of both Integrated eNodeB SON technology, based on Qualcomms UltraSON and a standardized SON interface (which supoport TR. 69) for network based SON. When deployed using iBridge backhaul AirSynergy also integrates Backhaul SON into the LTE SON Framework. This allows a network to be optimized for both LTE access and Backhaul simultaneously without the need for extensive, formal planning.
The products self-confi gure, self-connect, and self-optimize. In addition, unlike conventional mobile network planning and design, expansion of the coverage area can be optimized and adapted depending on the local need.
3GPP LTE-Advanced ACCESS SPECIFICATIONS
IEEE iBridge BACKHAUL SPECIFICATIONS
RADIO INTERFACE
Version: Release 8,9 and 10 Feature SetsOperational Frequency Bands: Band 7 and 41 (2.6 GHz) Band 12, 13, 14 and 17 (700 MHz) Band 20 (800 MHz) Band 40 (2.3-2.4 GHz) Band 42 and 43 (3.4-3.8 GHz) Band 3 (1.7-1.8 GHz) Band 44 (700 MHz) Band 4 (1.7-2.1 GHz*) Band 25 (1.9 GHz*) Band 5 (850 MHz*) Band 1 (1.9-2.1 GHz*)
Duplex: FDD & TDDMax Channel BW: 3 x 20 MHzMax Transmit Power: +33 dBm per TxMCS Support: Up to 64-QAMSynchronization: GNSS(GPS) & IEEE1588 PTPv2
IEEE 802.16r RADIO INTERFACE
Operational Frequency Bands: Various (between 400 MHz and 6 GHz)Duplex: TDDInterface: Layer 2 Ethernet or internalMIMO Streams: 2x2 MIMOMIMO Modes: Downlink and Uplink, Spatial Multiplexing & STCFrame Size: 2.5 and 5msMax Channel BW: 10, 20, 40 and 80 MHz (2x40 MHz)Max Output Power: Up to +30dBm per TxMCS Support: Up to 256-QAM rate 5/6
KEY FEATURES
Advanced Antenna Techniques 2 x 2 MIMO: SM and TxD SU-MIMO MU-MIMO
System Features Inter-RAT Mobility RAN Sharing Automatic Neighbor Relation (ANR) eICIC, ABS and CRE Embedded SON
*In Roadmap
LTE Relay SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Release 8/9 UE Relay
Operational Frequency Bands: Standard LTE 3GPP BandsDuplex: FDD and TDDMIMO: DL: 2x2 MIMO, UL SISOMax Channel BW: 20 MHz (2 x 20 MHz: iBridge 400)Max Transmit Power: +30dBm per TxMCS Support: 64-QAM rate 5/6 (256 QAM Ready)UE Class: Cat 4 (Cat 5/8: iBridge 400)
Release 10 3GPP Compliant Relay
Operational Frequency Bands: Standard LTE 3GPP BandsDuplex: FDD or TDDMIMO: DL: 4x4 MIMO, UL 2x2 MIMOMax Channel BW: 20 MHz (2 x 20 MHz: iBridge 400)Max Transmit Power: +30dBm per TxMCS Support: 64-QAM rate 5/6 (256QAM ready)UE Class: Cat 5/8
eNode/BS Confi gurations: Triple LTE Access plus NLOS Small Cell Backhaul radios 3GPP plus IEEE 802.11abgn/ac and/or IEEE 802.16rAntenna Confi gurations: X-Polar Omni Triple X-Polar Smart Switching Directional X-Polar Sectored Quad X-Polar SectoredSite Confi gurations: Omni Access (with or without iBridge Backhaul) Multi-sector (with or without iBridge Backhaul) iBridge Relay (with or without Access) iBridge Base*Dimensions: 560 x 230 x 190 mm / 22 x 9 x 7.5 in.*Weight: 20 kg / 44 lb*Power Consumption: Up to 220 WattsOperating Temperature Range: -40C to +55C / -40F to +130F IP Rating: IP67
iBridge Relay Products
Integrated iBridge 200
UE Silicon based UE RelayWorks wth any Release 8/9 eNodeBSingle 20 MHz FDD or TDD interfaceVarious Relay EPC OptionsStandalone or Integrated with eNodeB
Integrated iBridge 400
SDR Backhaul radio for LTE RelayMultiple NLOS backhaul options802.16r, UE Relay, Release 10 3GPP RelayStandalone or Integrated with eNodeB
*Triple LTE interfaces and single NLOS backhaul
About AirspanWith over 1000 customers in over
100 countries and as a top vendor for
carrier-class 3GPP and IEEE broadband
wireless solutions, Airspan is recognized
as a leader and pioneer in 3GPP and
IEEE broadband wireless technologies.
Providing an expansive product
portfolio, Airspan off ers customers the
widest selection of 4G LTE products in
the industry with an unsurpassed level
of technology to benefi t their business
case. Airspan has solutions spanning
the 700 MHz to 6.4 GHz frequency
bands.
Contact Airspan today!
Airspan has sales offi ces in the following countries
For more information about Airspan, its products
and solutions, please visit our web site:
www.airspan.com
or email:
Finland
Poland
Russia
United Kingdom
United States
Australia
India
Indonesia
Israel
Japan
Philippines
Sri Lanka
UAE
South Africa
Headquarters
777 Yamato Road, Suite 310 Boca Raton, Florida 33431USA
AirSynergy 3000 rev. I
Air4G LTE-Onlyplease
Air4GpAir4Gs Brochure_02022012AirCore BrochureAirSynergy 1000AirSynergy 2000AirSynergy 3000