Product Spray Guns Additional free information on any of these items can be obtained by circling the appropriate number on the reader service card. Airless Spray Gun High-Voltage Multiplier Grace Inc. PCF Group Inc. Minneapolis Stamford, Conn. Grace’s AA Plus air-assisted airless spray gun is designed to atomize high-solids coatings at pressures up to 4,000 psi. It is suited for applying lacquers, plural- component materials, and protective coatings in metal- finishing applications. The AA Plus gun is readily adapt- able to existing airless- or air-assisted-airless finishing lines without major changes. It provides fine-finish qual- ity with reduced overspray and improved effkiency. The gun is available with a standard air cap and tip or a new Reverse-A-Clean @AC) tip and guard. The RAC tech- nology removes clogs quickly with a simple turn of the switch-tip’s handle. PCF Group Inc. offem the Mitsuba patented Multiset te- setable high-voltage multiplier in the gun. With the Multiset resetable multiplier there is no need for operation shutdown while you send your defective multiplier to the manufactnmr for judgment on whether it should be replaced under wananty. The exclusive multiset m&table high-voltage multiplier comes built into the spray gun. Replacement is simple-Just rotate the gun barrel 90 in. Circle 103 on reader Information card Automatic HVLP Gun Can-Am Engineered Products Inc. Livonia, Mich. .- - Circle 101 on reader information card Platinum Spray Gun Titan Inc. Franklin Lakes, N. J. The 2100 gun incorporates several features that facilitate its mounting and set up in stationary, reciprocator, and robotic installations. This high-performance, compact, automatic gun weighs only 23 oz including its 360” mounting clamp. All fluid-wetted parts are machined from stainless steel and have Teflon packings and seals, allowing the gun to be used with the full sprectmm of industrial coatings and if necessary may be immersed in solvent during cleaning. Capable of spraying most of today’s industrial coatings, Titan’s new Platinum spray gun is designed for operating pressures of up to 5,000 psi while using stainless steel fluid passages. It features a two-finger trigger pull for ease and comfort as well as a cam-actuated trigger pull for increased seal and wire life. In addition its unique two-piece seal assembly design allows for the tungsten carbide ball to be removed while leaving the seal assembly in the gun, which saves both time and money on maintenance and repairs. Circle 102 on reader information card Circle 104 on reader lntormation card METAL FINISHING . NOVEMBER 1997 Q Copyright Elsevier Science Inc. 35

Airless spray gun

Download PDF Report

Upload
dinhdat
View
220
Download
3

Embed Size (px)

Citation preview

Product Spray Guns

Additional free information on any of these items can be obtained by circling the appropriate number on the reader service card.

Airless Spray Gun High-Voltage Multiplier Grace Inc. PCF Group Inc. Minneapolis Stamford, Conn.

Grace’s AA Plus air-assisted airless spray gun is designed to atomize high-solids coatings at pressures up to 4,000 psi. It is suited for applying lacquers, plural- component materials, and protective coatings in metal- finishing applications. The AA Plus gun is readily adapt- able to existing airless- or air-assisted-airless finishing lines without major changes. It provides fine-finish qual- ity with reduced overspray and improved effkiency. The gun is available with a standard air cap and tip or a new Reverse-A-Clean @AC) tip and guard. The RAC tech- nology removes clogs quickly with a simple turn of the switch-tip’s handle.

PCF Group Inc. offem the Mitsuba patented Multiset te- setable high-voltage multiplier in the gun. With the Multiset resetable multiplier there is no need for operation shutdown while you send your defective multiplier to the manufactnmr for judgment on whether it should be replaced under wananty. The exclusive multiset m&table high-voltage multiplier comes built into the spray gun. Replacement is simple-Just rotate the gun barrel 90 in.

Circle 103 on reader Information card

Automatic HVLP Gun Can-Am Engineered Products Inc. Livonia, Mich.

.- -

Circle 101 on reader information card

Platinum Spray Gun Titan Inc. Franklin Lakes, N. J.

The 2100 gun incorporates several features that facilitate its mounting and set up in stationary, reciprocator, and robotic installations. This high-performance, compact, automatic gun weighs only 23 oz including its 360” mounting clamp. All fluid-wetted parts are machined from stainless steel and have Teflon packings and seals, allowing the gun to be used with the full sprectmm of industrial coatings and if necessary may be immersed in solvent during cleaning.

Capable of spraying most of today’s industrial coatings, Titan’s new Platinum spray gun is designed for operating pressures of up to 5,000 psi while using stainless steel fluid passages. It features a two-finger trigger pull for ease and comfort as well as a cam-actuated trigger pull for increased seal and wire life. In addition its unique two-piece seal assembly design allows for the tungsten carbide ball to be removed while leaving the seal assembly in the gun, which saves both time and money on maintenance and repairs.

Circle 102 on reader information card Circle 104 on reader lntormation card

METAL FINISHING . NOVEMBER 1997 Q Copyright Elsevier Science Inc. 35