Upload
others
View
15
Download
0
Embed Size (px)
Citation preview
AirCooled Engine Technology
www.thepowerportal.com
Voed_schools
briggs
Try searching a few model numbers
092902
130202
420405 240302
Briggs & Stratton – General Information 30 Points Directions: Complete the following questions using the Briggs & Stratton #270962
Repair Manual. Use the Table of Contents, Check Chart, and any other tables and charts necessary.
AirCooled Engine Technology
AirCooled Engine Technology 1. What section contains information about:
Ignition Systems __________ Lubrication __________
Use the Table of Contents
AirCooled Engine Technology 2. What’s the oil capacity for: 130000 Horizontal __ oz. 90000 Vertical __ oz.
AirCooled Engine Technology 3. What’s the end play tolerance for: 80000 Horizontal __” 130000 Vertical __”
AirCooled Engine Technology 4. Is it safe practice to refuel a hot engine or
to crank the engine with the spark plug removed?
AirCooled Engine Technology 4. Is it safe practice to refuel a hot engine or
to crank the engine with the spark plug removed?
AirCooled Engine Technology 5. If synthetic 5W30 or 10W30 oil isn’t available,
what oil viscosity is good for above 40°? ________
AirCooled Engine Technology 6. Briggs & Stratton recommends changing oil after the first ____ hours
& then after every ____ hours…or monthly.
AirCooled Engine Technology 7. Page ____ in section 1 has procedures for servicing air filter
oilfoam elements & precleaners.
AirCooled Engine Technology 7. Page ____ in section 1 has procedures for servicing air filter
oilfoam elements & precleaners.
AirCooled Engine Technology 8. The flywheel is removed during a tuneup to check the oil __________ & flywheel _______ condition.
AirCooled Engine Technology 11. What is the 1st thing to check if the engine starts hard or has kickback?
AirCooled Engine Technology 1223. Use the Model Number System Chart at the end of section 1
to describe the following engines:
MODEL #92912 9 = ___________ 2 = ___________ 0 = ___________ 1 = ___________ 2 = ___________ Manufacture Date CODE #070425 D.O.M. ________
D.O.M = Date of Manufacture
AirCooled Engine Technology 1223. Use the Model Number System Chart at the end of section 1
to describe the following engines:
MODEL #259833 25 = _______________ 9 = ________________ 8 = ________________ 3 = ________________ 3 = ________________ Manufacture Date CODE #090924 D.O.M. _____________
D.O.M = Date of Manufacture
AirCooled Engine Technology 24. What does the Type # identify?
Internal Corporate Information like: Engine Color, Decals, OEM Sold To, Equipment Mounted on, etc.
AirCooled Engine Technology 2530. Find the following information:
Maximum Engine Speed with a 21” Mower Blade ________
AirCooled Engine Technology 2530. Find the following information:
Valve Clearances for Aluminum Engines IN _____ EX _____
AirCooled Engine Technology 2530. Find the following information:
Section & Page with Cylinder Head Torque Sequences ________
AirCooled Engine Technology 2530. Find the following information:
Reason for Cylinder Head Torque Sequence _____________
AirCooled Engine Technology 2530. Find the following information:
Maximum Compression Ring End Gap for Aluminum Engines __________