Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Scambiatori Aria-olio Serie HPA Air-oil heat-exchangersHPA Series
Gli scambiatori di calore aria-olio EMMEGI, sonoimpiegati per il raffreddamento di circuitioleodinamici usando, come fluido raffreddante, l’ariaambiente convogliata sulla radiante da una ventolaazionata da un motore elettrico o idraulico.La massa radiante, in lega d’alluminio ad altaresistenza, è ottenuta mediante un processocostuttivo di saldobrasatura sottovuoto.La particolare configurazione dei condotti aumentala turbolenza del fluido e di conseguenza la capacitàdi scanbio; inoltre, la presenza di speciali turbolatorisull’ alettatura del pacco radiante, miglioraulteriormente il coefficiente di trasmissione totale.Il risultato è un prodotto tecnologicamente avanzatodi dimensioni contenute, leggero e robusto.
Fluidi compatibili. OIL MINERALI, HL, HLP.. EMULSIONI ACQUA-OLIO. ACQUA-GLICOLE. Per altri fluidi consultare EMMEGI.
Specifiche tecniche Masse Radianti
. Materiale: alluminio “long life”.
. Pressione d’esercizio: 20 bar.
. Pressione di collaudo: 35 bar.
. Temperatura max d’esercizio: 120°c
. Per particolari atmosfere aggressive consultare l’EMMEGI.
InstallazioneLo scambiatore può essere montato in posizioneorrizontale o verticale, rispettando la distanzaminima dalla parete ( vedi fig. 1 ), in modo daassicurare un naturale afflusso e deflusso dell’ aria diraffreddamento.Lo scambiatore è installato, di norma, sulle tubazionidi ritorno dell’ olio del serbatoio; deve, inoltre essereprotetto da urti e vibrazioni meccaniche mediantesupporti e collegato all’ impianto con tubazioniflessibili. É necessario evitare che sia sottoposto abrusche variazioni di portata, colpi d’ ariete e pulsazioni continue che danneggiano in modoirreversibile la radiante.Per preservare lo scambiatore dalla sovrapressioneche si genera all’ avviamento dell’ impianto, per elevata viscosità dell’ olio, si suggerisce l’ inserimentodi una valvola di by-pass ( vedi fig.2 ).
EMMEGI air-oil heat exchangers are used for coolingoil hydraulic systems using as the coolant ambient airthat passes over the radiant by means of a fanoperated by an electric or hydraulic motor.The cooler element, in high resistance aluminium alloy,is obtained by means of a braze-welding processcarried out under vacuum. The particular configuration of the cooling pipesincrease the turbulence of the fluid consequently of the exchange capacity; moreover, the presence of specialjets on the cooler finning further improves the totaltransmission coefficient.The result is a very small, light and robusttechnologically advanced product.
Compatible fluids. MINERAL OILS; HL; HLP.. WATER-OIL EMULSION.. WATER-GLYCOL.. Consults EMMEGI for other fluids.
Technical specification of CoolerElement. Material: “long life” aluminium.. Operating pressure: 20 bar. Test pressure: 35 bar.. Max operating temperature: 120°c.. For specially “ aggressive” atmospheres contact EMMEGI.
InstallationThe exchangers can be fitted in a horizontal position,respecting the minimum distance from the wall (seefig.1) so as to ensure a natural flow of cooling air.The exchangers is usually installed on oil tank returnpiping; it must also be protected from impacts andmechanical vibrations by supports and must beconnected to the plant with flexible pipes.Avoid subjecting the exchanger to sudden changes inflow, hammering and pulsations that can causeirreversible damage to the element.We recommend installing a by-pass valve ( see fig.2 ) toprotect the exchanger from over-pressure generatedwhen the plants is started up due to high oil viscosity.
Introduzione Introduction
1CATALOGO PRODOTTI PRODUCTS CATALOGUE
ManutenzioneÉ buona norma prestare particolare attenzione allapulizia della massa radiante per garantire un naturalericambio d’ aria, ed evitare una diminuzionedell‘ efficenza termica.
Pulizia lato olioPer eseguire la pulizia lato olio, lo scambiatore dovràessere smontato. Lo sporco può essere rimossoflussando in controcorrente un prodotto sgrassante,compatibile con alluminio. Effettuare un lavaggio conolio idraulico prima di ricollegare il prodottoall’ impianto.
Pulizia lato ariaLa pulizia lato aria può essere effettuata con ariacompressa o acqua, con direzione del getto paralleloalle alette per non danneggiarle. Lo sporco oleoso ograsso può essere rimosso con getto di vapore o acquacalda. Durante questa operazione, il motore elettriconon deve essere collegato alla tensione, e drovà essere adeguatamente protetto.
Esempio di sceltadello scambiatorePer effettuare la scelta dello scambiatore si procedecome segue:
Potenza da dissipare : 19,5 [KW]Portata olio ISO VG 32 : 90 [Ipm]Temperatura ingresso olio : 60 [°c]Temperatura ambiente : 30 [°c]Ventola azionata da motore elettrico 230/400V-50Hz.
Si calcola la potenza specifica di scambio espressa inKW/°C, conoscendo la potenza da dissipare e il T(differenza tra la temperatura olio ingresso e latemperatura ambiente).
P= = 0.65 KW/°C
Nota la portata olio (90 Ipm) e la potenza specifica discambio (0.65 KW/°C) si procede alla ricerca delprodotto avvalendosi dei grafici riportati a catalogo,
relativi ai singoli modelli.
19,5 KW
60°- 30°
MaintenanceYou should be particularly carefully in cleaning thecooler element to guarantee a natural exchange of air,in order to prevent a reduction in thermal efficiency
Cleaning oil sideThe exchanger should be dismantled to clean on the oilside. The dirt can be removed by flushing, in counter-current, de-greasing substance, compatiblewith aluminium. Wash with hydraulic oil beforere-connecting the product to the plant.
Cleaning air sideCleaning on the air side can be done using compressedair or water, directing the jet parallel to the fins so as not to damage them.Oily dirt or grease can be removed with a jet of steam orhot water. During this operation, the electric motormust be disconnected from the voltage supply, andmust be adequately protected.
Example of how to choosea heat exchanger Proceed with sizing the exchanger, with a knowledge of the data as the example below shows:
Power to dissipate : 19,5 [KW]ISO VG 32 oil flow : 90 [Ipm]Oil input temperature : 60 [°c]Ambient temperature : 30 [°c]Fan operating with an electric motor 230/400V-50Hz.
You can then calculate the specific heat exchangepower KW/°C if you know the power to dissipate andthe T (the difference between the oil inputtemperature and the ambient temperature).
P= = 0.65 KW/°C
Note the oil flow (90 Ipm) and specific exchange power(0.65 KW/°C), product research is made by referring tothe graph in the catalogue which is relevant to each
model.
19,5 KW
60°- 30°
2 CATALOGO PRODOTTI PRODUCTS CATALOGUE
Diagramm
Dati tecnici Technical Data
lpm
HYDR. 3000 rpm
AC B14HYDR. 1500 rpm
DC
1,2
1
0,8
0,6
0,4
0,2
00 40 80 120 160
Kw/°C
Diagramma rendimento Performance diagram
Lo scambiatore selezionato risulta il modello:HPA 30 - 230/400 - 50Hzcod. 243003###.
Per la completa identificazione delloscambiatore consultare la pagina“DENOMINAZIONE CODICE PRODOTTO”. Nel casonon siano conosciuti tutti i dati, per la sceltaprendere contatto EMMEGI.
The exchanger selected is the following model:HPA 30 - 230/400 - 50Hzcod. 243003###.
For a complete desription of the exchangerconsult the “ PRODUCT ORDERING CODE” page.Ifyou do not know all the data required forselecting the model, contact EMMEGI.
CATALOGO PRODOTTI PRODUCTS CATALOGUE 3
1/2 Fan 1/2 Fan
Fig.1 Fig.2
243003 # # # 230-400 B14 AC 50 0,75 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
243012 # # #243024 # # #243056 # # #
12 DC 24 DC
Prepared for Gr.2 hydraul ic motor
/ /
0,1150,125
3,46-1,90
9,58 5,20
1394
2530 2900 280
280
450
450
82
74 78
4000
1550 1700
55
65 65 /
6,8
37
32 32 35
Contattare EMMEGI Contact EMMEGI
Per i l 12-24V i dati sono riferit i al singolo ventilatore For 12-24V the data refers to each ventilator
280-480 B14 AC 60 0,90 3,41-1,99 1673
Collegamenti elettrici Electric Wiring
230V-280V AC 3 PHASE 400V-480V AC 3 PHASE
12-24V DC
°C = Termostato NA./Thermostat No. K = Relè/Relay
M
M M
K
°C
+ -
U1
W2
U2
V2
V1
W1
YG K
°C
U1
W2
U2
V2
V1
W1
YG K
°C
4 CATALOGO PRODOTTI PRODUCTS CATALOGUE
Modulo richiesta datiSheet for cooler selection
CLIENTE COMPANYRICHIEDENTE NAME
ARIA-OLIO AIR-OILPORTATA OLIOOIL FLOW RATEPOTENZA INSTALLATATOTAL POWERPOTENZA DA DISSIPAREPOWE TO BE DISSIPATED TEMPERATURA INGRESSO OLIO OIL TEMPERATURE INLETTEMPERATURA ARIA MAX MAX AMBIENT TEMPERATURE VISCOSITÀ OLIO OIL VISCOSITYPRESSIONE DI LAVORO WORKING PRESSURE
Imp
KW
KW
°C
°C
cst
bar
TIPO DI VENTILAZIONE TYPE OF FAN UNIT
CORRENTE CONTINUA DIRECT CURRENT
CORRENTE ALTERNATA ALTERNATE CURRENT
TRIFASE 230-400V 280-480V
TENSIONE SPECIALE SPECIAL VOLTAGE
50 HZ 60 HZ
PREDISTOSTO MOTORE IDRAULICO PREPARATED FOR HYDRAULIC MOTOR
12V
24V
GR.2
CATALOGO PRODOTTI PRODUCTS CATALOGUE 5
GR.3
THREEPHASE
Denominazione codice prodotto Aria-olio Serie HPA
Ordering code Air-oil HPA eries
TIPO DI SISTEMA COOLER SERIES
424 ( HPA 24 )
TIPO DI MOTORIZZAZIONE FAN MOTOR TYPE
03 AC 230V-400V 50Hz / AC 280-480 60Hz (B14) 12 DC 12V24 DC 24V56 Pred. per mot. idr. gr.2 Pred. for hydr. mot. gr.258 Pred. per mot. idr. gr.3 Prep. for hydr. mot. gr.3
TERMOSTATI THERMOSTATS
1 Termostato fisso Fixed thermostat 40-28° 2 Termostato fisso Fixed thermostat 50-38°3 Termostato fisso Fixed thermostat 60-48°4 Termostato fisso Fixed thermostat 70-58°5 Termostato fisso Fixed thermostat 80-68°6 Termostato fisso Fixed thermostat 90-78°8 Termostato regolabile Adjustable thermostat 0-90° (TC2)9 Termostato regolabile collegato Connected adjustable thermostat 0-120°(TC2)
TIPO DI VENTILAZIONE VENTILATING TYPE
01 Aspirante Suction air flow02 Soffiante Blowing air flow
2 2 0103424
CATALOGO PRODOTTI PRODUCTS CATALOGUE6
HHPP
AA 11
22
Indice Index
Serie HPA - HPA Series
HPA 18 pag. 10 -11HPA 24 pag. 12 -13HPA 30 pag. 14 -15HPA 36 pag. 16 -17HPA 42 pag. 18 -19HPA 50 pag. 20 -21HPA 52 pag. 22 -23
HPA 12 pag. 8 - 9
Serie HPA 2 Pass - HPA 2pass SeriesHPA 24 2 PASS pag. 24-25HPA 30 2 PASS pag. 26-27HPA 36 2 PASS pag. 28-29HPA42 2 PASS pag. 30-31HPA50 2 PASS pag. 32-33HPA52 2 PASS pag. 34-35
Serie HPA/2 - HPA/2 Series
HPA 30/2 pag. 36-37HPA 36/2 pag. 38-39HPA 42/2 pag. 40-41HPA 50/2 pag. 42-43HPA 52/2 pag. 44-45
HPA 44/2 pag. 46-47HPA 44/3 pag. 48-49
HPA 46/2 pag. 50-51HPA 46/3 pag. 52-53
INDE
XIN
DEX
CATALOGO PRODOTTI PRODUCTS CATALOGUE 7
HP
A 12
HPA
12
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE
P/N 241203###
40
357
40
N.4 Holes Ø14
N.2 Ø
1”BSP
Breather Ø1/4”BSP
Ø 1/2”BSP(Thermostat)
38.5 150 38.5 40
1039
0
340
205
35
393
63
443
20025 25
50
Dimensioni Dimensions
153.5
205
224
100
326
100
105
15.5 15.5
P/N 241212###P/N 241224###
153.5
205
235.5
P/N 241256###
8
HP
A 12
HPA
12
241203 # # # 230-400 B14 AC 50 0,250 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
241212 # # #241224 # # #241256 # # #
12 DC 24 DC
Prepared for Gr.2 hydraul ic motor
/ /
0,1110,148
1,2-0,69
9,30 6,15
1400
2600 3100 305
305
315
315
72
77 80
1670
1590 1700
55
65 65 /
1,9
17
15 15 16
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 9
Kw/°C
0,4
0,35
0,3
0300 60 90 120 lpm
0,25
0,2
0,15
0,1
0,05
bar
0300 60 90 120 lpm
0,4
0,3
0,2
0,1
HYDR.3000 rpm
DC, AC B14 HYDR.1500 rpm
0,5
0,6
0,7
0,8
0,9
280-480 B14 AC 60 0,3 1,18-0,69 1680
HP
A 18
HPA
18Dimensioni Dimensions
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE
P/N 241803###
P/N 241812###P/N 241824###
P/N 241856###
450
N.4 Holes Ø14
N.2 Ø1”B
SP
Ø 1/2”BSP(Thermostat)
500
450
260
35
10
40
40 60 200 4060
63
421
50
25 200 25
471
200
224 12.5 12.5425
260
150
150
110
260
200
237
10
Breather Ø1/4”BSP
241803 # # # 230- 400 B14 AC 50 0,37
P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
241812 # # #241824 # # #241856 # # #
12 DC 24 DC
Prepared for Gr.2 hydraul ic motor
/ /
0,1870,170
1,81-1,04
15,6 7,1
1366
2350 2580 385
385
400
400
77
77 81
3350
2950 3100
55
65 65 /
2,9 18 18 19
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 11
HPA
18HP
A 18
Kw/°C
0,4
0,3
0350 70 105 140 lpm
0,2
0,1
bar
0350 70 105 140 lpm
0,4
0,2
HYDR.3000 rpm
AC B14 HYDR.1500 rpm
0,6
0,8
1,2
0,5
0,6
0,7
DC
1
1,4
280- 480 B14 AC 60 0,44 1,78-1,04 1639 20
12
Dimensioni Dimensions
HPA
24HP
A 24
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE
P/N 242403###
P/N 242412###P/N 242424###
P/N 242456###
N.4 Holes Ø14
N.2 Ø1”B
SP
Breather
Ø 1/2”BSP(Thermostat)
520
15450
45
45 55 200 55 45
4346
4
275
452
94
502
25 250 25
50
225
255
275
150
150
125
42512.5 12.5
225
275
268
242403 # # # 230-400 B14 AC 50 0,55
P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
242412 # # #242424 # # #242456 # # #
12 DC 24 DC
Prepared for Gr.2 hydraul ic motor
/ /
0,1870,170
2,58-1,49
15,6 7,1
1391
2350 2580 305
385
400
400
79
77 80
2800
2100 2250
55
65 65 /
2,9
28
22 22 23
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 13
HPA
24HP
A 24
DC
AC B14HYDR. 1500 rpm
HYDR. 3000 rpm
Kw/°C
0,3
0,2
0350 70 105 140 lpm
0,1
bar
0350 70 105 140 lpm
0,4
0,2
0,6
0,8
1
0,4
0,5
0,6
0,7
0,8
280-480 B14 AC 60 0,66 2,56-1,49 1669 28
HP
A 30
HPA
30Dimensioni Dimensions
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE14
P/N 243003###
465
N.4 Holes Ø14
N.2 Ø1 1
/4”BS
PBreather
Ø 1/2”BSP(Thermostat)
670
15
614
350
45
45
43
4562.5 200 62.5 25 250 25
502
50
94
452
123.5 123.5168
220
260
150
259
150
150
125
P/N 243012###P/N 243024###272
207.5
350
P/N 243056###
12.5 12.5440
DC
AC B14HYDR. 1500 rpm
HYDR. 3000 rpm
243003 # # # 230-400 B14 AC 50 0,75 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
243012 # # #243024 # # #243056 # # #
12 DC 24 DC
Prepared for Gr.2 hydraul ic motor
/ /
0,1150,125
3,46-1,90
9,58 5,20
1394
2530 2900 280
280
450
450
82
74 78
4000
1550 1700
55
65 65 /
6,8
37
32 32 35
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 15
HPA
30HP
A 30
Kw/°C
0,6
0,4
0400 80 120 160 lpm
0,2
bar
0400 80 120 160 lpm
0,4
0,2
0,6
0,8
1
0,8
1
1,2
1,2
Per i l 12-24V i dati sono riferit i al singolo ventilatore For 12-24V the data refers to each ventilator
280-480 B14 AC 60 0,90 3,41-1,99 1673
Dimensioni Dimensions
HPA
36HP
A 36
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
P/N 243603###
610
N.4 Holes Ø14
N.2 Ø1 1
/4”BS
P
Breather
Ø 1/2”BSP(Thermostat)
770
P/N 243612###P/N 243624###
P/N 243656###
714
400
43
45
45
15
4578 78310
94460
25 25250510
50
276
262
256150
258 12.5 12.5581
200
200
200
100
278
385
268
CATALOGO PRODOTTI PRODUCTS CATALOGUE16
3
Kw/°C
0,6
0,4
0450 90 135 180 lpm
0,2
0,8
1
1,2
bar
0450 90 135 180 lpm
0,4
0,2
0,6
0,8
1
1,2
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 17
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
HPA
36HP
A 36
243603 # # # 230-400 B14 AC 50 1,1 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
243612 # # #243624 # # #243656 # # #
12 DC 24 DCPrepared for Gr.2 hydraul ic motor
/ /
0,1600,177
4,35-2,50
13,30 7,35
1378
2560 3000 305
305
500
450
82
83 84
5650
2100 2400
55
64 64 /
9,4
60
50 50 52
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
Per i l 12-24V i dati sono riferit i al singolo ventilatore For 12-24V the data refers to each ventilator
1,4
DC
AC B14HYDR. 1500 rpm
HYDR. 3000 rpm
280-480 B14 AC 60 1,32 4,29-2,50 1654
P/N 244203###
606
N.4 Holes Ø14
N.2 Ø1 1
/4”BS
PBreather
Ø 1/2”BSP(Thermostat)
920
45
4545 78 78310
15502
94
50
25025 25552
475
303
272
125
175
175
175
175
12.5 12.5581
P/N 244256###
303
475
270
P/N 244258###Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE18
HPA
42HP
A 42
Dimensioni Dimensions
HYDR. 3000 rpm
AC B14HYDR. 1500 rpm
3
Kw/°C
0,6
0,4
0550 110 165 220 lpm
0,2
0,8
1
1,2
bar
0550 110 165 220 lpm
0,5
0,25
0,75
1
1,25
1,5
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 19
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
244203 # # # 230-400 B14 AC 50 1,1 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
244256 # # #244258 # # # Prepared for Gr.3 hydraul ic motor
4,35-2,50 1378 560
560
84 7550 55
/
10,6 65
58 58
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
1,4
Prepared for Gr.2 hydraul ic motor
560 /
1,75
2
1,6
1,8 HPA
42HP
A 42
280-480 B14 AC 60 1,32 4,29-2,50 1654
P/N 245003###
N.4 Holes Ø14
N.2 Ø
1 1/2”
BSP
Breather
Ø 1/2”BSP(Thermostat)
940
45
543725
870
485
45 76 4576400
113
593
25025 25
50
485
362.5
120
313
175
175
175
175
20 20682
P/N 245056###
485
362.5
315
P/N 245058###Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE20
HPA
50HP
A 50
Dimensioni Dimensions
3
245003 # # # 230-400 B14 AC 50 1,1 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
245056 # # #245058 # # # Prepared for Gr.3 hydraul ic motor
4,77-2,74 915 630
630
80 7550 55
/
14,2 90
83 83
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
Prepared for Gr.2 hydraul ic motor
630 /
HYDR. 3000 rpm
AC B14
Kw/°C
1,5
1
0700 140 210 280 lpm
0,5
2
2.5
bar
0700 140 210 280 lpm
0,4
0,2
0,6
0,8
1
1,2
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 21
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
1,4
HYDR. 2000 rpm
HYDR. 1000 rpm
HPA
50HP
A 50
280-480 B14 AC 60 1,32 4,70-2,74 1098
Dimensioni Dimensions
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE22
HPA
52HP
A 52
N.4 Holes Ø14
N.2 Ø
1 1/2”
BSP
Breather
Ø 1/2”BSP(Thermostat)
940
45
400
P/N 245203###
725
870
485
50
45 4576 76
140
573
50
25 25250
623
15
340 68220 20
P/N 245256###
362.5
485
P/N 245258###
362.5
485
120
175
175
175
175
342
3
245203 # # # 230-400 B14 AC 50 1,1
P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
245256 # # #245258 # # # Prepared for Gr.3 hydraul ic motor
4,77-2,74 915 630
630
80 7050 55
/
17,7 95
89 89
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
Prepared for Gr.2 hydraul ic motor
630 /
HYDR. 3000 rpm
AC B14
Kw/°C
1,5
1
0700 140 210 280 lpm
0,5
2
2.5
bar
0700 140 210 280 lpm
0,4
0,2
0,6
0,8
1
1,2
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 23
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
HYDR. 2000 rpm
HYDR. 1000 rpm
HPA
52HP
A 52
280-480 B14 AC 60 1,32 4,70-2,74 1098
Dimensioni Dimensions
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE24
HPA
24 2
PASS
HPA
24 2
PASS
P/N 242703###
N.4 Holes Ø14N.2 Ø1”BSP
Breather
Ø 1/2”BSP(Thermostat)
520
450 452
94
50
25025 25
300
50 50100
100 100200
15
40
275
275
200
255
125
150
150
12.5 12.5425
P/N 242712###P/N 242724###
275
200
268
P/N 242756###
Dati tecnici Technical Data
HPA
24 2
PASS
HPA
24 2
PASS
DC
AC B14HYDR. 1500 rpm
HYDR. 3000 rpm
Kw/°C
0,5
0,4
0200 40 60 80 lpm
0,3
bar
0200 40 60 80 lpm
0,4
0,2
0,6
0,8
1
0,6
1,2
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 25
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
0,2
0,1
0,7
0,8
242703 # # # 230-400 B14 AC 50 0,55
P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
242712 # # #242724 # # #242756 # # #
12 DC 24 DC
Prepared for Gr.2 hydraul ic motor
/ /
0,1870,170
2,58-1,49
15,6 7,1
1391
2350 2580 305
385
400
400
79
77 80
2800
2100 2250
55
65 65 /
2,9
28
22 22 23
Contattare EMMEGI Contact EMMEGI
280-480 B14 AC 60 0,66 2,56-1,49 1669 28
Dimensioni Dimensions
P/N 243303###
N.4 Holes Ø14
N.2 Ø1”BSP
Breather
Ø 1/2”BSP(Thermostat)
670
46515
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE26
HPA
30 2
PASS
HPA
30 2
PASS
50 50100
350
45
50
25 25250
300
94452
107.5 107.5200
220
148.5
260
168
259 12.5 12.5440
125
150
150
150
350
207.5
272
P/N 243312###P/N 243324###
P/N 243356###
Dati tecnici Technical Data
HPA
30 2
PASS
HPA
30 2
PASS
DC
AC B14HYDR. 1500 rpm
HYDR. 3000 rpmKw/°C
0,8
0250 50 75 100 lpm
0,6
bar
0250 50 75 100 lpm
0,5
1,5
1
1
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
27
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
0,4
0,2
CATALOGO PRODOTTI PRODUCTS CATALOGUE
2
243303 # # # 230-400 B14 AC 50 0,75 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
243312 # # #243324 # # #243356 # # #
12 DC 24 DC
Prepared for Gr.2 hydraul ic motor
/ /
0,1150,125
3,46-1,90
9,58 5,20
1394
2530 2900 280
280
450
450
82
74 78
4000
1550 1700
55
65 65 /
6,8
37
32 32 35
Contattare EMMEGI Contact EMMEGI
Per i l 12-24V i dati sono riferit i al singolo ventilatore For 12-24V the data refers to each ventilator
280-480 B14 AC 60 0,90 3,41-1,99 1673
Dimensioni Dimensions
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE28
HPA
36 2
PASS
HPA
36 2
PASS
P/N 243803###
N.4 Holes Ø14N.2 Ø1”BSP
Breather
Ø 1/2”BSP(Thermostat)
770
15
P/N 243812###P/N 243824###
P/N 243856###
610
50 50100
5040
045
25 25250
300
94
460
122.5 122.5310
177 256
262
276
258
100
200
200
200
12.5 12.5581
277.5
400
268
HPA
36 2
PASS
HPA
36 2
PASS
Dati tecnici Technical Data
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
29
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
CATALOGO PRODOTTI PRODUCTS CATALOGUE
DC
AC B14HYDR. 1500 rpm
HYDR. 3000 rpmKw/°C
1,2
0300 60 90 120 lpm
0,8
bar
0300 60 90 120 lpm
0,5
1,5
1
1
0,6
0,2
2
1,4
0,4
243803 # # # 230-400 B14 AC 50 0,75 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
243812 # # #243824 # # #243856 # # #
12 DC 24 DC
Prepared for Gr.2 hydraul ic motor
/ /
0,1150,125
3,46-1,90
9,58 5,20
1394
2530 2900 280
280
450
450
82
74 78
4000
1550 1700
55
65 65 /
6,8
37
32 32 35
Contattare EMMEGI Contact EMMEGI
Per i l 12-24V i dati sono riferit i al singolo ventilatore For 12-24V the data refers to each ventilator
280-480 B14 AC 60 0,90 3,41-1,99 1673
Dimensioni Dimensions
P/N 244503###
HPA
42 2
PASS
HPA
42 2
PASS
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE30
P/N 244556###
P/N 244558###
N.4 Holes Ø14
N.2 Ø1 1/4”BSP
Breather
Ø 1/2”BSP(Thermostat)
920
60515 50 50100
45
50
475
25 25250
300
50294
122.5 122.5310
125
175
175
175
175
12.5 12.5581272
302.5
475
302.5
475
270
HPA
42 2
PASS
HPA
42 2
PASS
HYDR. 3000 rpm
AC B14
Kw/°C
0,6
0,4
0300 60 90 120 lpm
0,2
0,8
1
1,2
bar
0300 60 90 120 lpm
0,5
1
1,5
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 31
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
Dati tecnici Technical Data
1,4
2
1,6
HYDR. 1500 rpm
2,5
3
244503 # # # 230-400 B14 AC 50 1,1 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
244556 # # #244558 # # # Prepared for Gr.3 hydraul ic motor
4,35-2,50 1378 560
560
84 7550 55
/
10,6 65
58 58
Contattare EMMEGI Contact EMMEGI
Prepared for Gr.2 hydraul ic motor
560 / 280-480 B14 AC 60 1,32 4,29-2,50 1654
Dimensioni Dimensions
P/N 298703###
N.4 Holes Ø14
N.2 Ø1 1/4”BSP
Breather
Ø 1/2”BSP(Thermostat)
940
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE32
HPA
50 2
PASS
HPA
50 2
PASS
P/N 298756###
P/N 298758###
72515
485
50
50 50100
50
25 25250
300
113
543
121 121400
362.5
313 20 20682
135
175
175
175
175
485
362.5
485
315
HPA
50 2
PASS
HPA
50 2
PASS
HYDR. 3000 rpm
AC B14
Kw/°C
1,5
0400 80 120 160 lpm
1
2
bar
0400 80 120 160 lpm
0,5
1
1,5
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 33
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
Dati tecnici Technical Data
2
HYDR. 1000 rpm
0,5
HYDR. 2000 rpm
3
298703 # # # 230-400 B14 AC 50 1,1 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
298756 # # #298758 # # # Prepared for Gr.3 hydraul ic motor
4,77-2,74 915 630
630
80 7550 55
/
14,2 90
83 83
Contattare EMMEGI Contact EMMEGI
Prepared for Gr.2 hydraul ic motor
630 / 280-480 B14 AC 60 1,32 4,70-2,74 1098
Dimensioni Dimensions
P/N 245403###
N.4 Holes Ø14
N.2 Ø1 1/2”BSP
Breather
Ø 1/2”BSP(Thermostat)
940
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE34
72515
HPA
52 2
PASS
HPA
52 2
PASS
485
50
50 100 50
140
570
50
25 25250
300 121 121400
485
362.5
120
340
175
175
175
175
20 20682
P/N 245456###
485
362.5 P/N 245458###
342
HPA
52 2
PASS
HPA
52 2
PASS
HYDR. 3000 rpm
AC B14
Kw/°C
1,5
0400 80 120 160 lpm
1
2
bar
0400 80 120 160 lpm
0,2
1
1,2
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 35
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
Dati tecnici Technical Data
HYDR. 1000 rpm
0,5
HYDR. 2000 rpm
2,5
0,4
0,6
0,8
1,4
1,6
1,8
3
245403 # # # 230-400 B14 AC 50 1,1
P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
245456 # # #245458 # # # Prepared for Gr.3 hydraul ic motor
4,77-2,74 915 630
630
80 7050 55
/
17,7 95
89 89
Contattare EMMEGI Contact EMMEGI
Prepared for Gr.2 hydraul ic motor
630 / 280-480 B14 AC 60 1,32 4,70-2,74 1098
Dimensioni Dimensions
P/N 243103###
N.4 Holes Ø14
N.2 Ø1 1
/2”BSP
Breather
Ø 1/2”BSP(Thermostat)
670
15
HPA
30 / 2
HPA
30 / 2
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE36
880
40
40 40311 31164 64
610
304
350
452
94
50
25 25250502
150 178 178 150224
264
220
260
P/N 243112###P/N 243124###
434223
350
268
P/N 243156###
HP
A 30
/ 2HP
A 30
/ 2
AC B14HYDR. 1450 rpm
243103 # # # 230-400 B14 AC 50 0,55 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
243112 # # #243124 # # #243156 # # #
12 DC 24 DC
Prepared for Gr.2 hydraul ic motor
/ /
0,1150,125
2,58-1,49
9,58 5,20
1391
2530 2900 280
280
400
400
79
77 81
3300
1550 1700
55
65 65 /
13,6
74
64 64 70
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 37
Kw/°C
1
0800 160 240 320 lpm
0,5
bar
0800 160 240 320 lpm
0,4
0,2
0,6
0,8
1
1,5
2
1,2
I dati soprariportati sono riferit i al singolo ventilatore The data refers to each ventilator
HYDR. 3000 rpm
1,4
280-480 B14 AC 60 2,56-1,49 16690,66
Dimensioni Dimensions
HPA
36 / 2
HPA
36 / 2
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE38
P/N 243703###
N.4 Holes Ø14
N.4 Ø1 1
/2”BS
P
Ø 1/2”BSP(Thermostat)
770
1165
15 40 4063 6337452 415
40
4540
071
030
45294
50
25 25250502
P/N 243712###P/N 243724###
154.5 256 289 256
262
276
263
282.5 600 255
400
272
P/N 243756###
HP
A 36
/ 2HP
A 36
/ 2
AC B14HYDR. 1500 rpm
243703 # # # 230-400 B14 AC 50 0,75 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
243712 # # #243724 # # #243756 # # #
12 DC 24 DC
Prepared for Gr.2 hydraul ic motor
/ /
0,1600,177
3,46-1,90
13,30 7,35
1394
2560 3000 305
305
450
450
85
86 87
4000
2100 2400
55
64 64 /
18,8
120
100 100 102
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 39
Kw/°C
2
1
900 180 270 360 lpm
1,5
bar
0900 180 270 360 lpm
0,4
0,2
0,6
0,8
1
2,5
3
1,2
I dati soprariportati sono riferit i al singolo ventilatore The data refers to each ventilator
HYDR. 3000 rpm
0
0,5
DC
280-480 B14 AC 60 0,90 3,41-1,99 1673
74
Dimensioni Dimensions
P/N 244303###
N.4 Holes Ø14
N.4 Ø1 1
/2”BS
P
Ø 1/2”BSP(Thermostat)
920
1160
15
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE40
HPA
42 / 2
HPA
42 / 2
452 41540 4037 6363
40
45860
30
475510
25 25250
50
94460
P/N 244356###
475
255 600 255
268
475
255 600 255
273
P/N 244358###
HP
A 42
/ 2HP
A 42
/ 2
244303 # # # 230-400 B14 AC 50 1,1 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
244358 # # # Prepared for Gr.3 hydraul ic motor
4,35-2,50 1378 500
500
87 7550 55
/
21,2 135
122 122
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
I dati soprariportati sono riferit i al singolo ventilatore The data refers to each ventilator
AC B14HYDR. 1500 rpm
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 41
Kw/°C
2
1
1100 220 330 440 lpm
1,5
bar
01100 220 330 440 lpm
0,5
0,25
0,75
1,25
1
2,5
3
1,5
HYDR. 3000 rpm
0
0,5
244356 # # # Prepared for Gr.2 hydraul ic motor
/ 500
3.5
1,75
2
280-480 B14 AC 60 1,32 4,29-2,50 1645
Dimensioni Dimensions
P/N 298803###
N.4 Holes Ø14
N.4 Ø1 1
/2”BS
P
Ø 1/2”BSP(Thermostat)
940
1375
15 545
HPA
50 / 2
HPA
50 / 2
49840 4053 5347
870
3550
485
50
25 25250564
51411340
687 294.5294.5
485
284
687 294.5294.5
485
286
P/N 298856###
P/N 298858###
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE42
HP
A 50
/ 2HP
A 50
/ 2
298803 # # # 230-400 B14 AC 50 1,1 P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
298858 # # # Prepared for Gr.3 hydraul ic motor
4,35-2,50 1378 560
560
87 8500 55
/
28,4 192
180 180
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
I dati soprariportati sono riferit i al singolo ventilatore The data refers to each ventilator
AC B14HYDR. 1500 rpm
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 43
Kw/°C
2
1
1400 280 420 560 lpm
1,5
bar
01400 280 420 560 lpm
0,4
0,2
0,6
1
2,5
3
1,4
HYDR. 3000 rpm
0
0,5
298856 # # # Prepared for Gr.2 hydraul ic motor
/ 560
3.5
1,2
4
HYDR. 2250 rpm
0,8
280-480 B14 AC 60 1,32 4,29-2,50 1645
Dimensioni Dimensions
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
HPA
52 / 2
HPA
52 / 2
CATALOGO PRODOTTI PRODUCTS CATALOGUE44
P/N 245303###
P/N 245356###
P/N 245358###
N.4 Holes Ø14
N.4 Ø1 1
/2”BS
P
Ø 1/2”BSP(Thermostat)
1375
94
40 53 545 498 47 53 40
40
1
3587
048
550
140
50
25 25250591
541
294.5 687 294.5
311
485
485
294.5 687 294.5
313
HP
A 52
/ 2HP
A 52
/ 2
245303 # # # 230-400 B14 AC 50 1,1
P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
245358 # # # Prepared for Gr.3 hydraul ic motor
4,35-2,50 1378 560
560
87 7750 55
/
28,4 195
180 180
Contattare EMMEGI Contact EMMEGI
Dati tecnici Technical Data
I dati soprariportati sono riferit i al singolo ventilatore The data refers to each ventilator
245356 # # # Prepared for Gr.2 hydraul ic motor
/ 560
AC B14HYDR. 1500 rpm
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
CATALOGO PRODOTTI PRODUCTS CATALOGUE 43
Kw/°C
2
1
1400 280 420 560 lpm
1,5
bar
01400 280 420 560 lpm
0,4
0,2
0,6
1
2,5
3
HYDR. 3000 rpm
0
0,5
3.5
1,2
HYDR. 2250 rpm
0,8
4
4,5
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
280-480 B14 AC 60 1,32 4,29-2,50 1645
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE46
HPA
44 / 2
HPA
44 / 2
Dimensioni Dimensions
N.4 Holes Ø14
Ø1/2”BSP
880
1785
485800 4040
75 Breather Ø1/4”BSP 94
45
75
1760
1610
810
475
45
75
25
50 75
400 400
N.2 Ø 2”BSP
50
25 25250
300 200 200400
100
20 20840
780
780
8585
30
N.20
Slot
ted ho
les Ø
9x15
175
175
175
175
175
175
175
175
110
4040
HP
A 44
/ 2HP
A 44
/ 2
041650B40050# 400 B14 AC 50 1,5
P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
2,7 1378 560 78 10000 54 25
140
140
Dati tecnici Technical Data
I dati soprariportati sono riferit i al singolo ventilatore The data refers to each ventilator
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
CATALOGO PRODOTTI PRODUCTS CATALOGUE 47
Kw/°C
2
1
1000 200 300 400 lpm
1,5
bar
01000 200 300 400 lpm
2
1
3
2,5
3
AC 50/60 Hz
0
0,5
3.5
4
4
4,5
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
400-460 B14 AC 60 1,5 2,5 1600 560 78 10000 54041650B40060#
500
500
Dimensioni Dimensions
HPA
44 / 3
HPA
44 / 3
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE48
N.6 Holes Ø14
Ø1/2”BSP
880
2605
Breather Ø1/4”BSP
N.2 Ø 2 1/2”BSP840
2400
N.30
Slot
ted ho
les Ø
9x15
2570
2420
35
7575
45
810
810
510
80040 4045
50
400 400
45
485
94
50
100
500
250 100 100 25
4525
10
200 400 200
100
20 20
175
175
175
175
175
175
175
175
175
175
175
175
4011
011
04085
85
041240B40050# 400 B14 AC 50 1,5
P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
2,7 1378 560 81 10000 54 35
210
210
Dati tecnici Technical Data
I dati soprariportati sono riferit i al singolo ventilatore The data refers to each ventilator
400-460 B14 AC 60 1,5 2,5 1600 560 81 10000 54041240B40060#
HPA
44 / 3
HPA
44 / 3
Diagramma rendimento Performance diagram
Perdite di carico Pressure drop ( ISO VG 32)
CATALOGO PRODOTTI PRODUCTS CATALOGUE 49
Kw/°C
3
1
1000 200 300 400 lpm
2
bar
01000 200 300 400 lpm
5
4
6
4
AC 50/60 Hz
0
5
7
6
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
500
500
3
2
1
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
Dimensioni Dimensions
AA
Part. X
Sez. A-A
18
30
30
ø50
ø60.2
525
45
50
90
45
50
100
23.6
23.6
42.9
11.1 11.177.8 N.4 Heli-coil M12
ø1/2"BSP
Breather Ø1/4"BSPX
479.5
75 30
800 4040
880
37.5
1685
37.5
1760
1785
25 50 75
400 400
500
810
20
50
94
N.20
Slo
tted
hole
s ø
9x25
25
300
25 25250
20 20840
200 200400
100 N.4 Holes Ø14
3017
517
517
517
511
017
517
517
517
53095
9576
050
760
N.2 SAE3000 2"
HPA
46 / 2
HPA
46 / 2
CATALOGO PRODOTTI PRODUCTS CATALOGUE50
HP
A 46
/ 2HP
A 46
/ 2
CATALOGO PRODOTTI PRODUCTS CATALOGUE 51
Diagramma rendimento Performance diagramKw/°C
4,5
1000 200 300 400 lpm
3
5,25HIGH SPEED
0
6
6,75
500
Perdite di carico Pressure drop ( ISO VG 32)bar
01000 200 300 400 lpm
4
500
3
2
1
cst F
10 0,5
Fattore di correzione - F - ( perdite di carico) Correction factor - F - (Pressure drop)15 20 30 40 50 60 80 100 200 300
0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
A0351004005#1 400 AC (LS) 50 1,37
P/N V Hz kW A rpm ø Fan dB(A) (m³/ h) IP It Kg
2,3 950 630 80 / 54 25
185
185
Dati tecnici Technical Data
I dati soprariportati sono riferit i al singolo ventilatore The data refers to each ventilator
50 2,1 3,6 1300 630 86 / 54A0351004005#1 400 AC (LS) Δ
LOW SPEED3,75
2,25
1,5
0,75
Le dimensioni di ingombro e le caratteristiche tecniche non sono impegnativeOver-all dimensions and technical characteristic are not binding
CATALOGO PRODOTTI PRODUCTS CATALOGUE52
HPA
46 / 3
HPA
46 / 3
Dimensioni Dimensions
X Breather Ø1/4"BSP
ø1/2"BSP
479.5
75 30
80040 40
880
37.5
2495
37.5
2570
25
2595
50 75
400 400
500
810
810
20
94
100
N.30
Slo
tetd
hol
es ø
9x25
200 200400
N.6 Holes Ø14100
500
25
50 100100250
20 20840
9595
2380
3030
175
175
175
175
110
175
175
175
175
110
175
175
175
175
N.2 SAE3000 2"
AA
Part. X
Sez. A-A
18
30
30
ø50
ø 60.2
525
45
50
90
45
50
100
23.6
23.6
42.9
11.1 11.177.8 N.4 Heli-coil M
12
HP
A 46
/ 3HP
A 46
/ 3
CATALOGO PRODOTTI PRODUCTS CATALOGUE 53
Dati tecnici Technical Data
Fattore di correzione - F - (perdite di carico) Correction factor - F - (Pressure drop)
Diagramma rendimento Performance diagramKw/°C
0
6,75
6
5,25
4,5
3,75
3
2,25
1,5
0,75
0 100 200 300 400 500 lpm
HIGH SPEED
Perdite di carico Pressure drop (ISO VG 32)bar
0
8
6
4
2
0 100 200 300 400 500 lpm
cst 10 15 20 30 40 50 60 80 100 200 300F 0,5 0,65 0,77 1 1,2 1,4 1,6 1,9 2,1 3,3 4,3
I dati soprariportati sono riferiti al singolo ventilatore. The data refers to each ventilator.
P/N V Hz kW A rpm ø Fan dB(A) (m 3/h) IP It Kg
A0352004005#1 400 AC (LS) 50 1,37 2,3 950 630 80 / 54 255
A0352004005#1 400 AC (HS) Δ 50 2,1 3,6 1300 630 86 / 54 255 35
LOW SPEED
Alla ricerca di un continuo miglioramento delprodotto, EMMEGI S.p.A. si riserva il diritto diapprontare modifiche ai dati e allecaratteristiche illustrate nel catalogo.
La riproduzione, anche parziale, del presentecatalogo è vietata ai termini di legge.
Questo catalogo sostituisce tutti i precedenti.
As EMMEGI S.p.A. are always investigating methodsof improving products and introducing newtechnology, we reserve the right to modyfy withoutnotice the data features shown in this catalogue.
The reproduction, even partial of this catalogue isforbidden by law.
This catalogue replace all the previous one.
Cod. 066995RRev. 16 - 11/15