AIAG 2016 Catlog

8/17/2019 AIAG 2016 Catlog

http://slidepdf.com/reader/full/aiag-2016-catlog 1/96

Quality Corporate Responsibility Supply Chain Management

CATALOG

2016

PUBLICATIONS & TRAINING

8/17/2019 AIAG 2016 Catlog


TABLEof contents

CORPORATE

RESPONSIBILITY05

QUALITY10SUPPLY CHAIN

MANAGEMENT 39

8/17/2019 AIAG 2016 Catlog


ISO/IEC 1702568

ISO/TS 1694969

MATERIALSMANAGEMENT 73

QUALITY 74

QUALITY CORE TOOLS83SUPPLY CHAIN

MANAGEMENT90

CONFLICT MINERALS

REPORTING61

CORPORATE

RESPONSIBILITY62

CUSTOMS & EXPORT

COMPLIANCE

62ENGINEERING63

GLOBAL CHEMICAL

REGULATORY64

ISO 1400165

ISO 26262: FUNCTIONAL

SAFETY67

8/17/2019 AIAG 2016 Catlog


For more information visit joinAIAG.org or call (248) 358-3003

WE ARE THE AUTO INDUSTRY.

Formed in 1982 by major OEMs andSuppliers, AIAG provides the neutraland legal forum that allows theindustry to create common solutionsto fix whatever it is that’s causingpain in their manufacturing andsupply chains.

OEMs and suppliers, workingtogether. It’s true—it happens hereevery single day. Under the AIAGumbrella, over 600 industry volunteerscollaborate on smart answers thatsolve global automotive challenges.

AIAG’s dedicated team of programmanagers and volunteers worktogether to streamline the problem-solving process. They provide theneeded intelligence and expertise todevelop industry changing solutions– fast. And the solutions AIAG workson don’t just solve problems that havealready been identified; they help

prevent issues from happening in thefirst place.

AIAG needs industry-wideparticipation to support the money-saving activities and initiatives it tacklesfor you every day. Solutions thathave saved the industry $Billions.Stop commiserating and startcollaborating.

WHY JOIN AIAG?

http://go.aiag.org/join


8/17/2019 AIAG 2016 Catlog


5PUBLICATIONS CORPORATE RESPONSIBILITY

To purchase product as a site license:

Please contact AIAG’s Customer Service at: (248) 358-3003, or send an email to [email protected]

Publications, Guidelines, and Industry StandardsAIAG delivers global solutions for productivity and profitability to drive rework, error, and waste out of your processes. Publications, guidelines,and industry standards are designed to advance continuous improvement in business practices, encourage collaboration, and provide globalresolutions to industry issues.

This product catalog includes standards and reports representing the three AIAG Areas of Expertise: Corporate Responsibility, Quality, and SupplyChain Management. For a complete listing of all AIAG products, please visit www.AIAG.org.

CORPORATE RESPONSIBILITY

BEST PRACTICES FOR MIST CONTROL IN MACHINE TOOL ENCLOSURES This industry best-practices publication covers mist control for wet machining using CNC machines, transfer lines, and Minimum Quantity Lubrication

(MQL) machining processes.

Product Code: OHS-7 Version: 1 (2008)/Reviewed 2015

Format - Language Member Price Non-Member Price License

Hardcopy (English) $29.00 $116.00

e-Document (English) FREE $116.00 Single user license

Guide for Responding to the CM Reporting Templates

Members of the AIAG Conict Minerals Work Group (CMWG) developed

this template assessment to unify the expected quality of supplier

responses to the Conict Minerals Reporting Template (CMRT) formerly

known as the EICC-GeSI Template. This template assessment is not to betreated as an alternative to legal advice or used in lieu of due diligence

requirements under the rule. Instead, OEMs and Tier-N suppliers may

utilize this optional tool to set a consistent response to suppliers and

augment their own internal procedures.

FREE Template Assessment Now Available!

For more information visit www.aiag.org or call us at (248) 358-3003

http://www.aiag.org/products/products-list/product-details?ProductCode=OHS-7

http://www.aiag.org/products/products-list/product-details?ProductCode=CM-3



8/17/2019 AIAG 2016 Catlog


6 CORPORATE RESPONSIBILITY PUBLICATIONS

ENVIRONMENTAL MANAGEMENT SYSTEMS - REQUIREMENTS OF USEISO 14001:2015 specifies the requirements for an environmental management system that an organization can use to enhance its environmentalperformance. ISO 14001:2015 is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that

contributes to the environmental pillar of sustainability.

Product Code: I14001-15 Version: 3 (2015)


e-Document & Hardcopy Kit (English) $259.50 $259.50 Single user license


e-Document (English) $173.00 $173.00 Single user license

ERGONOMIC GUIDELINES FOR SMALL LOT DELIVERY SYSTEMS This easy-to use guideline provides not only a systematic process for analyzing and evaluating musculoskeletal injury (or disorder) risk factors inSmall Lot Delivery Systems (SLDS) but also recommendations for the design of material handling tasks and material handling systems. This guidelinecontains recommendations, not mandates, which are applicable during material handling system





GUIDELINE FOR HAZARDOUS MATERIAL STORAGE The goal of this document is to protect people, property, the environment, and company assets by minimizing the risk of fires, explosions, andhazardous releases resulting from improper storage.

Product Code: XO-OHS-1 Version: 1 (2004)/Reviewed 2015



GUIDELINE FOR MANUALLY HANDLED CONTAINERS Guideline provides a common approach to container design b ]ased on sound ergonomic practices and principles accounting for manual tasks, such aspushing/pulling, lifting/lowering and carrying packages and containers.





http://www.aiag.org/products/products-list/product-details?ProductCode=I14001-15


http://www.aiag.org/products/products-list/product-details?ProductCode=XO-OHS-1



http://www.aiag.org/products/products-list/product-details?ProductCode=XO-OHS-1



8/17/2019 AIAG 2016 Catlog





GUIDE FOR RESPONDING TO THE CM REPORTING TEMPLATESThe AIAG Conflict Minerals Work Group developed the template assessment to unify the expected quality of supplier responses to the ConflictMinerals Reporting Template (formerly the EICC-GeSI Template). OEMs and Suppliers may utilize this optional tool to provide consistent responses

to suppliers and augment their own internal procedures. The document includes easy to follow instructions with color coded steps and includesquestions to determine if the response is sufficient.

Product Code: CM-3 Version: 4 (2015)


Adobe PDF with Assessment File (English) FREE FREE

INDUSTRIAL TRUCK PEDESTRIAN SENSING SYSTEMS WHITE PAPER

The white paper addresses the requirements of a device or system, comprised of one or more components, that when installed on an industrial truck,will be capable of warning the industrial truck operator of the presence of pedestrians.



Print On Demand (English) $29.00 $116.00


LEADERSHIP EXCELLENCE IN HEALTH SAFETY AND THE ENVIRONMENT Describes what Heath Safety Excellence leadership looks like and to specify a set of principles and actions that executives, managers and supervisorscan take to become better HSE leaders.





Three Ways to Order:

1. Shop and purchase online atwww.aiag.org

2. Call our Customer Service teamat (248) 358-3003 to place yourorder

3. Download an order form from ourwebsite at www.aiag.org and fax it to(248) 799-7995







8/17/2019 AIAG 2016 Catlog


8 CORPORATE RESPONSIBILITY PUBLICATIONS

LIFT TRUCK ROTATED OPERATOR COMPARTMENTS: AN ERGONOMIC REVIEWUndertaken as part of a continued effort by AIAG’s Industrial Truck Group to reduce operator strain as well as pedestrian incidents associated withreverse driving, this study was initiated to evaluate the ergonomic and visibility benefits from the operator’s standpoint.





LIFT TRUCK VISIBILITY WITH LOAD Paper compiles findings on the subject of forward visibility and examines criteria to consider in determining forward visibility including load size,

operator stature, and lift truck attachments.





MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATIONDescribes what Heath Safety Excellence leadership looks like and to specify a set of principles and actions that executives, managers and supervisorscan take to become better HSE leaders.





PANDEMIC PREPAREDNESS & RESPONSE PLAN When a global pandemic event occurs it will represent a significant potential concern for our people and business. This example preparedness plan,geared toward Tier 2 and 3 suppliers, will assist each company in preparing for and enduring a pandemic. This is an unprecedented threat that doesn’tfall into other previously defined disaster recovery plans.



Hardcopy (English) $29.00 $116.00e-Document (English) FREE $116.00 Single user license









8/17/2019 AIAG 2016 Catlog





PEDESTRIAN & VEHICLE SAFETY GUIDELINES This guideline addresses plant facility layouts, visual displays, and mental attitudes.

Product Code: OHS-2 Version: 2 (2011)/Reviewed 2012Format - Language Member Price Non-Member Price License



THE ABC’S OF GHS COMPLIANT SAFETY DATA SHEETS & LABELSDeveloped by the Globally Harmonized System (GHS) work group at AIAG and the internship program at Purdue-Calumet University as sanctioned bythe Chemical Management and Reporting (OHCL) Advisory committee, this easy to use reference document allows the user to develop GHS compliant

Safety Data Sheets (SDS) that meet the requirements of OSHA HCS 2012. Consolidating information scattered throughout the internet in variousunrelated databases, this indispensable document covers the new SDS Formatting Requirements; converting existing Material Safety Data Sheets(MSDS) to the new GHS compliant SDS format; generating an SDS from general/public information; and assistance in creating GHS labels.

Product Code: CR-2 Version: 1 (2015)


Hardcopy & e-Document (English) $29.00 $116.00

Hardcopy (English) $29.00 $116.00 Single user license


Globalization of the automotive industry has led to the development of increasingly

complex supply chains. Understanding and managing potential risks has become a strategicpriority for the industry. AIAG’s member companies are working together to reaffirm ourcommitment to doing business in an ethical and responsible way to benefit workers,communities and the environment.

The AIAG Supply Chain Sustainability eLearning and AIAG Supply Chain SustainabilityKnowledge Assessment are two of the tools you need to manage risk in your organization!

Visit http://bit.ly/aiagSCsustainability for more information.

New! Supply Chain Sustainability

eLearning & Knowledge Assessment


http://www.aiag.org/products/products-list/product-details?ProductCode=CR-2



8/17/2019 AIAG 2016 Catlog


10 QUALITY PUBLICATIONS

QUALITY

7-STEP PROBLEM SOLVING PROCESS FOR TH&E SUPPLIERS The Seven-Step Problem Solving Process provides a comprehensive checklist of actions to be considered for each of the steps or phases of developing

corrective and preventive actions to a problem.

Product Code: THE-4 Version: 1 (2000)




ACT REPORTING INFORMATION KIT FOR TREAD ACT REPORTING Developed to help motor vehicle and equipment manufacturers clarify some of the key milestones, deliverables and action steps for achieving theobjectives of the Transportation Recall Enhancement, Accountability and Documentation (TREAD) Act.

Product Code: TC-5 Version: 1 (2003)




Dear FutureAutomotive Experts,As a new automove professional, you will be sure to face

challenges as the Baby Boomers connue to rere, causing

gaps in knowledge.

To help you tackle this challenge, AIAG has started a program

which will focus on providing knowledge recovery and transfer

for automove professionals in the industry.

Presentaons in the areas of Quality, Supply Chain and Corporate

Responsibility from subject maer experts as well as networking

opportunies will be provided at the free monthly events,

which are held in the Metro Detroit area.

Interested in learning more?

Call us at 248-358-9780 for program details!

http://www.aiag.org/products/products-list/product-details?ProductCode=THE-4

http://www.aiag.org/products/products-list/product-details?ProductCode=Tc-5

http://www.aiag.org/products/products-list/product-details?ProductCode=Tc-5


8/17/2019 AIAG 2016 Catlog


11PUBLICATIONS QUALITY



ADVANCED PRODUCT QUALITY PLANNING AND CONTROL PLAN (APQP) The APQP manual provides guidelines for creating a product quality plan that supports the design and development of products that meet or exceedcustomer requirements. Now the standard across many manufacturing sectors, APQP defines the required inputs and outputs of each stage of the

product development process.

Product Code: APQP Version: 2 (2008)



e-Document & Hardcopy Kit (Spanish) $45.00 $225.00 Single user license


Hardcopy (Spanish) $30.00 $150.00

e-Document (Chinese) $30.00 $150.00 Single user license


e-Document (Japanese) $30.00 $150.00 Single user license

e-Document (Korean) $30.00 $150.00 Single user license

e-Document (Portuguese) $30.00 $150.00 Single user license

e-Document (Russian) $30.00 $150.00 Single user license

e-Document (Spanish) $30.00 $150.00 Single user licensee-Document (Thai) $30.00 $150.00 Single user license

A GUIDE TO THE PROJECT MANAGEMENT BODY OF KNOWLEDGEA Guide to the Project Management Body of Knowledge (PMBOK Guide) -Fifth Edition reflects the collaboration and knowledge of working projectmanagers and provides the fundamentals of project management as they apply to a wide range of projects. This internationally recognized standardgives project managers the essential tools to practice project management and deliver organizational results.

Product Code: PMBOK-5 Version: 5 (2013)



http://www.aiag.org/training/training-list/training-details?CourseCode=APQP

http://www.aiag.org/products/products-list/product-details?ProductCode=PMBOK-5

http://www.aiag.org/products/products-list/product-details?ProductCode=PMBOK-5


8/17/2019 AIAG 2016 Catlog



A SNAPSHOT OF PRODUCT DEVELOPMENT PRACTICESThis document presents the results of an as-is study of business process issues related to product data exchange during product development inautomotive supply chains.

Product Code: D-7 Version: 1 (1997)



AUTOMOTIVE PROJECT MANAGEMENT GUIDE This is a guide to improve the automotive product development process. It explains how to integrate the Project Management Institute PMBOK andthe APQP.

Product Code: PM-1 Version: 1 (1997)




AUTOMOTIVE WARRANTY MANAGEMENT GUIDELINEGuideline provides a comprehensive review to achieve a “zero error” culture. Guideline focuses on the reader’s understanding and efforts related to

building a “zero error” culture within their companies.

Product Code: CQI-14 Version: 3 (2015)





Is your AIAG.org account information up-to-date?

Make sure you are getting the maximum benefit from your AIAG.org account! You can view your information by visitingAIAG.org and clicking on the MY ACCOUNT tab.

Login to make sure your information is up-to-date! Don’t have an acccount yet? Simply click the CREATE NEWACCOUNT button and you are on your way to taking advantage of all that AIAG.org has to offer!

Not sure if you have a login? Please contact customer service at 248-358-3003 to find out.

http://www.aiag.org/products/products-list/product-details?ProductCode=D-7

http://www.aiag.org/products/products-list/product-details?ProductCode=PM-1

http://www.aiag.org/products/products-list/product-details?ProductCode=CQI-14

http://www.aiag.org/





http://www.aiag.org/products/products-list/product-details?ProductCode=PM-1






8/17/2019 AIAG 2016 Catlog





BEST PRACTICES IN SUPPLY CHAIN PRODUCT DEVELOPMENTThis document focuses on the business aspects of the AutoSTEP pilot, which has examined the business processes used in product data exchangeand identified best practices for product development through the supply chain. Product Description Problem Areas Business Case Templates

References





BUSINESS OPERATING SYSTEMS FOR HEALTH CARE ORGANIZATIONSThis document provides guidance for continuous improvement, emphasizing error prevention and reduction in variation and waste, deploys bestpractices protocols, and provides a glossary of standard quality terms.

Product Code: HF-2 Version: 1 (2007)




BUSINESS PROCESS NARRATIVE FOR TH&E INDUSTRY Purpose of the Business Process narratives is to provide a description of baseline EDI concepts from the perspective of the truck & heavy equipmentindustry and a series of summaries of potential EDI activities for today’s business environment.




Save on Shipping & Handling Fees

Most documents can be purchased as e-Documents for instant access


http://www.aiag.org/products/products-list/product-details?ProductCode=HF-2



http://www.aiag.org/products/products-list/product-details?ProductCode=HF-2


8/17/2019 AIAG 2016 Catlog



BUSINESS OPERATING SYSTEMS A guideline for a comprehensive means of running any type of business. Its step-by-step methodology provides flexibility while instilling structure.Implementation will allow you to link strategy to tactics on a day-to-day basis while any areas that need improvement and/or structured problem-

solving effort will be brought to the surface.





CORE TOOLS FORMS The Core Tools Forms includes the required forms from the APQP, PPAP, FMEA, and MSA Core Tool manuals. Product Code: CTFD-1 Version: 5d (2010)


Downloadable File (English) $250.00 $500.00 Single user license

DEFINING PRODUCT DATA QUALITY This report is the first step in a project to develop reference documents that provide guidance for improving product data quality throughout the supplychain.





DESIGN REVIEW BASED ON FAILURE MODES (DRBFM)The AIAG DRBFM Reference Guide provides guidance and examples of procedures on how the technical risk can be represented and addressed toensure the revised design meets quality and customer expectations. The AIAG DRBFM aligns with the SAE J2886 DRBFM Recommended Practice. TheSAE document describes the basic principles and processes of DRBFM. Product Code: CQI-24 Version: 1 (2014)



e-Document (English) $49.00 $196.00 Single user licensee-Document & Hardcopy Kit (English) $73.50 $294.00 Single user license


http://www.aiag.org/products/products-list/product-details?ProductCode=CTFD-1





http://www.aiag.org/products/products-list/product-details?ProductCode=CTFD-1


8/17/2019 AIAG 2016 Catlog





DESIGN REVIEW BASED ON FAILURE MODES (CQI-24) & SAE J2886 KITThis kit contains a copy of both the AIAG DRBFM and SAE J2886. The AIAG DRBFM Reference Guide is intended to provide information and examplesof procedures to implement DRBFM proficiency expectations at all levels of engineering and management. The SAE document describes the basic

principles and processes of DRBFM.

Product Code: XO-SAEJ2886A-K Version: 1 (2013)




EFFECTIVE ERROR-PROOFING Building a ‘zero error’ culture is every organization’s goal. Effective Error-Proofing is a comprehensive guideline on how to build that culture into anyorganization by moving away from detection oriented quality practices and toward a culture of zero error.






Credit-Based Training Programs

AIAG’s credit-based training program provides an added value for your training

investment. Through on-site or open enrollment courses, you can earn college credit

for ISO/TS 16949:2009, Quality Core Tools, and ISO/IEC 17025-related courses.

The academic credits can be applied at most colleges and universities toward highereducation degrees. This is the first program of its kind for automotive quality training.

Academic credits are issued by Riverland Community College, accredited by

the Higher Learning Commission. To be eligible for academic credits, you must

successfully complete each course.

Call us at (248) 358-3003 for details!

http://www.aiag.org/products/products-list/product-details?ProductCode=XO-SAEJ2886A-K



http://www.aiag.org/products/products-list/product-details?ProductCode=XO-SAEJ2886A-K

8/17/2019 AIAG 2016 Catlog



EFFECTIVE PROBLEM SOLVING LEADER GUIDE Do you want to establish the right culture for problem solving but aren’t sure how? Look no further than AIAG’s Effective Problem Solving LeaderGuide. This guide focuses on the leader’s role in establishing the culture for problem solving teams and effectively engaging with them to prevent

problem recurrence, which cost the industry in both lost profitability and quality.






EFFECTIVE PROBLEM SOLVING PRACTITIONER GUIDE This guide provides the latest automaker thinking in problem solving and focuses on root cause analysis and the roles of the problem solving teammembers in resolving difficult to diagnose issues. Also provides guidance for which quality tools are most effective at each stage of the process.



Print On Demand (Portuguese) $49.00 $196.00






e-Document (Spanish) $49.00 $196.00 Single user license

ENGINEERING CHANGE MANAGEMENT - ENGINEERING CHANGE REQUEST (ECR) RECOMMENDATIONProvides an overview of the fundamental principles and key phases of the ECR reference process.




CD (English) $29.00 $116.00



http://www.aiag.org/products/products-list/product-details?ProductCode=XO-D-30





8/17/2019 AIAG 2016 Catlog





ENGINEERING CHANGE MANAGEMENT (ECM) RECOMMENDATIONA global recommendation on Management Strategies for Engineering Changes.




CD (English) $29.00 $116.00

FEATURE-BASED PROCESSING RECOMMENDED BUSINESS PROCESS Overview of Feature-Based Processing (FBP) which is a method for an OEM & supplier to forecast, manufacture, ship, receive, invoice, remit payment,control inventory, and supply for service without the assignment of a top-level part number.





FMEA FOR TOOLING & EQUIPMENT (MACHINERY FMEA)

This manual supports the machinery (the term machinery as used in this manual applies to tooling and equipment also) design process from designdevelopment through design approval.

Product Code: MFMEA Version: 2 (2012)






18 QUALITY



http://www.aiag.org/products/products-list/product-details?ProductCode=MFMEA

http://www.aiag.org/products/products-list/product-details?ProductCode=MFMEA



8/17/2019 AIAG 2016 Catlog



GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING ISO/IEC 17025:2005 specifies the general requirements for the competence to carry out tests and/or calibrations, including sampling. It covers testingand calibration performed using standard methods, non-standard methods, and laboratory-developed methods. It is applicable to all organizations

performing tests and/or calibrations.Product Code: I17025-05 Version: 2 (2005)




GLOSSARY OF COMMON RELIABILITY TERMS

An AIAG effort to harmonize and commonize terminologies used in the Automotive Reliability Domains.

Product Code: XO-D-31 Version: 1 (2011)



GS1 APPLICATION IDENTIFIERS AND ASC MH10 DATA IDENTIFIERSISO/IEC 15418:2009 specifies sets of Data Identifiers and Application Identifiers for the purpose of identifying encoded data, and identifies the

organizations responsible for their maintenance.

Product Code: XO-I15418-09 Version: 2 (2009)



GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 ISO/TR 10017:2003 provides guidance on the selection of appropriate statistical techniques that may be useful to an organization in developing,

implementing, maintaining and improving a quality management system in compliance with ISO 9001.

Product Code: I10017-03


Print On Demand(English) $149.00 $149.00


19QUALITY



http://www.aiag.org/products/products-list/product-details?ProductCode=XO-I15418-09






8/17/2019 AIAG 2016 Catlog





GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITSISO 10014:2006 provides guidelines for realizing financial and economic benefits from the application of the ISO 9000 quality management principles.




GUIDELINES FOR AUDITING MANAGEMENT SYSTEMSISO 19011:2011 provides guidance on auditing management systems, including the principles of auditing, managing an audit program and conductingmanagement system audits, as well as guidance on the evaluation of competence of individuals involved in the audit process, including the personmanaging the audit program, auditors and audit teams.





GUIDELINES FOR THE APPLICATION OF ISO 9001 SYSTEM LIFE CYCLEISO/IEC TR 90005:2008 provides guidance for organizations in the application of ISO 9001:2000 to the acquisition, supply, development, operation and

maintenance of systems and related support services.




GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEMISO 10019:2005 provides guidance for the selection of quality management system consultants and the use of their services. It is intended to assist

organizations when selecting a quality management system consultant. It gives guidance on the process for evaluating the competence of a qualitymanagement system consultant and provides confidence that the organization’s needs and expectations for the consultant’s services will be met.













8/17/2019 AIAG 2016 Catlog



IATF AUDITOR GUIDE FOR ISO/TS 16949 Learn how the auditors are trained to audit your company. This guide explains the competencies required for IATF Certification Body Auditors,including what activity, knowledge and skills are required to do an automotive process audit to ISO/TS 16949.

Product Code: IATFG-2 Version: 2 (2014)




INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEWISO/IEC 27000:2009 provides an overview of information security management systems, which form the subject of the information security

management system (ISMS) family of standards, and defines related terms.




ISO/TS 16949 7 PACK Set includes the latest editions of the ISO/TS 16949, the TSRULES 4th edition, and the Core Tools manuals: APQP, PPAP, FMEA, MSA, & SPC.

Product Code: TS7-K



ISO/TS 16949 GUIDANCE MANUAL This manual provides assistance in the application and certification of a quality management system compliant with TS 16949, providing examples,applications, and explanations for clauses in ISO/TS 16949.








http://www.aiag.org/products/products-list/product-details?ProductCode=IATFG-2


http://www.aiag.org/products/products-list/product-details?ProductCode=TS7-K



http://www.aiag.org/products/products-list/product-details?ProductCode=TS7-K


http://www.aiag.org/products/products-list/product-details?ProductCode=IATFG-2

8/17/2019 AIAG 2016 Catlog





ISO/TS 16949:2009 QUALITY MANAGEMENT SYSTEMS This publication promotes the adoption of a process approach when developing, implementing and improving the effectiveness of a quality system.

Product Code: TS(A)-3 Version: 3 (2009)







e-Document (Korean) $30.00 $180.00 Single user licenseHardcopy (Auditor Edition) (English) $40.00 $200.00

LAYERED PROCESS AUDIT GUIDELINE This guideline is designed to provide a common framework of the definitions and standard approaches that can be adopted by anyorganization to effectively implement layered process audits, which includes participation of management.


Format - Language Member Price Non-Member Price Licensee-Document & Hardcopy Kit (English) $43.50 $174.00 Single user license



Is your AIAG.org account information up-to-date?

Make sure you are getting the maximum benefit from your AIAG.org account! You can view your information by visitingAIAG.org and clicking on the MY ACCOUNT tab.

Login to make sure your information is up-to-date! Don’t have an acccount yet? Simply click the CREATE NEWACCOUNT button and you are on your way to taking advantage of all that AIAG.org has to offer!

Not sure if you have a login? Please contact customer service at 248-358-3003 to find out.


http://www.aiag.org/products/products-list/product-details?ProductCode=TS-3









http://www.aiag.org/products/products-list/product-details?ProductCode=TS-3

8/17/2019 AIAG 2016 Catlog



LONG TERM ARCHIVING & RETRIEVAL OF DIGITAL PRODUCTThe SASIG Long Term Archival and Retrieval team (LTAR) developed this project to guide the industry in effective, efficient, and common archival andretrieval practices. The recommendations are partitioned into four topic areas: Format, LTAR Process, Retention Time Periods, and Quality Assurance.

Finally, this guide includes a test bed for assessing an enterprise’s LTAR capability.





MEASUREMENT SYSTEMS ANALYSIS Measurement data is used in nearly every manufacturing process. As the quality of the data improves, the quality of decisions improves. This guidewill help you assess the quality of your measurement systems, providing a basis for recognizing where improvements can be made. The result isknowledge that can be used to improve your measurement process, in turn improving repeatable product quality.

Product Code: MSA-4 Version: 4 (2010)







e-Document (Czechoslovakian) $30.00 $150.00 Single user license







e-Document (Thai) $30.00 $150.00 Single user license



http://www.aiag.org/products/products-list/product-details?ProductCode=MSA-4

http://www.aiag.org/products/products-list/product-details?ProductCode=MSA-4


8/17/2019 AIAG 2016 Catlog





MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT ISO 14971:2007 specifies a process for a manufacturer to identify the hazards associated with medical devices, including in vitro diagnostic (IVD)medical devices.





MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS ISO/TR 14969:2004 provides guidance for the application of the requirements for quality management systems contained in ISO 13485. This guidance

can be used to better understand the requirements of ISO 13485 and to illustrate some of the variety of methods and approaches available formeeting the requirements of ISO 13485.

Product Code: I14969-04



Take the Next Step in Automotive Warranty Management

Te Automotive Warranty Assessment (CQI-14) raining:provides a best-practice approach for managing warrantyprocesses with the consumer in mind.

Tis one day workshop will train you to use the assessmenttool; provide a warranty process that delivers best practices;provide suggestions for optional reporting; and prepare you tobe a valuable aid for implementation.

Guideline & Training Now Available!

For more information on the Automotive Warranty Managementguideline or training, visit www.aiag.org or call us at (248)358-3003.






8/17/2019 AIAG 2016 Catlog


QUALITY PUBLICATIONS

POTENTIAL FAILURE MODE & EFFECTS ANALYSIS In order to achieve the greatest quality in manufacturing, potential failures must be identified before they occur.This industry-wide reference manualclarifies questions concerning the technical development of both Design and Process FMEAs.

Product Code: FMEA-4 Version: 4 (2008)














PRODUCT DEVELOPMENT METRICS This guideline is designed to provide a common framework of the definitions and standard approaches that can be adopted by anyorganization to effectively implement layered process audits, which includes participation of management.



Hardcopy (English) $29.00 $116.00e-Document (English) FREE $116.00 Single user license


1. Shop and purchase online at

www.aiag.org

2. Call our Customer Service team

at (248) 358-3003 to place yourorder

3. Download an order form from our

website at www.aiag.org and fax it to(248) 799-7995


http://www.aiag.org/products/products-list/product-details?ProductCode=FMEA-4



http://www.aiag.org/products/products-list/product-details?ProductCode=FMEA-4

8/17/2019 AIAG 2016 Catlog


QUALITY



PRODUCTION PART APPROVAL PROCESS Production Part Approval Process (PPAP) defines requirements for part qualification, including production and bulk materials.

Product Code: PPAP-4 Version: 4 (2006)







e-Document (English) $30.00 $150.00 Single user licensee-Document (German) $30.00 $150.00 Single user license







PROJECT MANAGEMENT OF COMPLEX AND EMBEDDED SYSTEMSEnsuring Product Integrity and Program Quality uses proven Project Management methods, as well as elements of IEEE embedded softwaredevelopment techniques, to explain how to deliver a reliable complex system to market.

Product Code: PMCE Version: (2008)



Instant Access!

Purchase e-Documents online for instant access.


http://www.aiag.org/products/products-list/product-details?ProductCode=PPAP-4

http://www.aiag.org/products/products-list/product-details?ProductCode=PMCE

http://www.aiag.org/products/products-list/product-details?ProductCode=PMCE

http://www.aiag.org/products/products-list/product-details?ProductCode=PPAP-4

8/17/2019 AIAG 2016 Catlog


QUALITY

QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY ISO 9000:2015 specifies the terms and definitions that apply to all quality management and quality management system standards developed by ISO/TC 176.






QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS ISO 10005:2005 provides guidelines for the development, review, acceptance, application and revision of quality plans. It is applicable whether or notthe organization has a management system in conformity with ISO 9001.




QUALITY MANAGEMENT SYSTEMS - REQUIREMENTSISO 9001:2015 specifies requirements for a quality management system when an organization needs to demonstrate its ability to consistently provideproducts and services that meet customer and applicable statutory and regulatory requirements. This guide aims to enhance customer satisfactionthrough the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer andapplicable statutory and regulatory requirements.




Hard Copy (English) $173.00 $173.00


Insight—Expertise—Results

Join AIAG, and you gain the power to make the right things happen in much less time.AIAG membership gets you FREE tools, assessments, training, publications, and much, much more.Did we mention that all of this was FREE?

Call (248) 358-3003 or visit joinaiag.org to join.










8/17/2019 AIAG 2016 Catlog


Q



QUALITY MEASUREMENT DATA SPECIFICATIONProprietary, integrated quality data collection solutions cost industry enormous amounts of money because of the lack of interoperability standard.Based on XML, the standard will enable gages to seamlessly exchange ALL types of quality information, including SPC and MSA studies to differenttools




READINESS CHECKLIST FOR SUB-TIER SUPPLIER MANAGEMENT PROCESS This free Readiness Checklist is a tool for management to use to assess their organization’s compliance with the aligned AIAG CQI-19 performanceexpectations.

Product Code: CQIA-19 Version: 1 (2012)


Adobe PDF (English) FREE FREE

RELIABILITY METHODS FOR IMPROVED PRODUCT DEPENDABILITY 2001 White Paper: A summary document of commonly suggested methods and guidelines for reliability analysis. Based on a review of current industry

practices performed by a team of reliability professionals from the auto, truck & heavy equipment industry.Product Code: THE-6 Version: 1 (2002)




REQUIREMENTS FOR REGULATORY PURPOSES

ISO 13485:2003 specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medicaldevices.







http://www.aiag.org/products/products-list/product-details?ProductCode=CQIA-19





http://www.aiag.org/products/products-list/product-details?ProductCode=CQIA-19


8/17/2019 AIAG 2016 Catlog


ROAD VEHICLES - FUNCTIONAL SAFETY - PART 1: VOCABULARY ISO 26262-1:2011 specifies the terms, definitions and abbreviated terms for application in all parts of ISO 26262.

Product Code: I26262-1-11 Version: 1 (2011)



ROAD VEHICLES - FUNCTIONAL SAFETY - PART 2: MANAGEMENT OF FUNCTIONAL SAFETY ISO 26262-2:2011 specifies the requirements for functional safety management for automotive applications.




ROAD VEHICLES - FUNCTIONAL SAFETY - PART 3: CONCEPT PHASE ISO 26262-3:2011 specifies the requirements for the concept phase for automotive applications.


Format - Language Member Price Non-Member Price LicensePrint On Demand (English) $149.00 $149.00

ROAD VEHICLES - FUNCTIONAL SAFETY - PART 4: PRODUCT DEVELOPMENT AT THE SYSTEM LEVELISO 26262-4:2011 specifies the requirements for product development at the system level for automotive applications.






www.aiag.org






http://www.aiag.org/products/products-list/product-details?ProductCode=I26262-1-11










8/17/2019 AIAG 2016 Catlog


To purchase product as a site license:Please contact AIAG’s Customer Service at: (248) 358-3003, or send an email to [email protected]

ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT AT THE HARDWARE LEVELISO ISO 26262-5:2011 specifies the requirements for product development at the hardware level for automotive applications.




ROAD VEHICLES - FUNCTIONAL SAFETY - PART 6: PRODUCT DEVELOPMENT AT THE SOFTWARE LEVELISO ISO 26262-6:2011 specifies the requirements for product development at the software level for automotive applications.




ROAD VEHICLES - FUNCTIONAL SAFETY - PART 7: PRODUCTION AND OPERATIONISO 26262-7:2011 specifies the requirements for production, operation, service and decommissioning.




ROAD VEHICLES - FUNCTIONAL SAFETY - PART 8: SUPPORTING PROCESSESISO 26262-8:2011 specifies the requirements for supporting processes.

Product Code: I26262-8-11 Version: 1 (2011)Format - Language Member Price Non-Member Price License














8/17/2019 AIAG 2016 Catlog


ROAD VEHICLES - FUNCTIONAL SAFETY - PART 9: AUTOMOTIVE SAFETY INTEGRITY LEVEL (ASIL)-ORIENTED AND SAFETY-ORIENTED ANALYSESISO 26262-9:2011 specifies the requirements for Automotive Safety Integrity Level (ASIL)-oriented and safety-oriented analyses.




ROAD VEHICLES - FUNCTIONAL SAFETY - PART 10: GUIDELINE ON ISO 26262IISO 26262-10:2012 provides an overview of ISO 26262, as well as giving additional explanations, and is intended to enhance the understanding ofthe other parts of ISO 26262. It describes the general concepts of ISO 26262 in order to facilitate comprehension.




Special Process Assessments

These assessments specify process requirements for an organization or itssuppliers performing the applicable process, which need to demonstrate abilityto consistently provide product that meets customer and applicable regulatoryrequirements, and enhance customer satisfaction through the effectiveapplication of the system, including processes for continual improvement of thesystem.

Special Process Publications:• Heat Treat Systems Assessment (CQI-9), 3rd edition• Plating Systems Assessment (CQI-11), 2nd edition

• Coating Systems Assessment (CQI-12), 2nd edition• Welding Systems Assessment (CQI-15), 1st edition• Soldering Systems Assessment (CQI-17), 1st edition• Molding System Assessment (CQI-23), 1st edition

• NEW! Casting System Assessment (CQI-27), 1st edition

Related Courses: • NEW! Understanding the Casting Special Process System Assessment• Understanding the Heat Treat, Soldering and Welding Special Process

System Assessments

• Understanding the Molding Special Process System Assessment• Understanding the Plating and Coating Special Process System Assessments







8/17/2019 AIAG 2016 Catlog



RULES FOR ISO/TS 16949 CERTIFICATION SCHEME This document, in regards to ISO/TS 16949 implementation, includes criteria for certification body recognition, certification body audit process,certification body auditor qualifications, and ISO/TS 16949 certificates.

Product Code: TSRULES(A)-4 Version: 4 (2013)Format - Language Member Price Non-Member Price License

Hardcopy, Notebook Size (English) $40.00 $200.00











SASIG 3D ANNOTATED MODEL STANDARDThis standard enables the industry to move from a traditional 2-D drawing world to a full 3-D model, which is completely annotated; contains all theinformation necessary to manufacture the part.

Product Code: XO-D-27 Version: 1 (2008)


e-Document (English) $29.00 $116.00

SASIG DIGITAL ENGINEERING VISUALIZATIONDocument identifies what Digital Engineering Visualization is, and how it can be utilized. Implementing the tools and processes in this guideline willhelp enable global engineering collaboration and standards within the worldwide automotive industry.



CD (English) $29.00 $116.00


http://www.aiag.org/products/products-list/product-details?ProductCode=TSRULES-4





http://www.aiag.org/products/products-list/product-details?ProductCode=TSRULES-4

8/17/2019 AIAG 2016 Catlog


SASIG LONG TERM ARCHIVING AND RETRIEVAL (LTAR)This document contains an assessment of the current state of LTAR and the future vision within the auto industry. Includes the necessary tools toidentify tasks, deliverables, and work stream timelines for projects.

Product Code: D-34 Version: 1 (2011)Format - Language Member Price Non-Member Price License



SASIG LONG TERM ARCHIVING AND RETRIEVAL - PROCESS RECOMMENDATIONThis document addresses the set of process recommendations. In particular, this document aims to provide a company with the key activities, inputs,

outputs, controls and mechanisms needed to fully support the long term archiving and retrieval of product definition information. If your company isdeveloping products using 3D models, and asking for models and digital product data from your suppliers, then this LTAR Process Recommendation isa must read.





SERVICE PRODUCTION PART APPROVAL PROCESS (SERVICE PPAP) This document identifies PPAP requirements for all service parts. These requirements are intended to be clarifications to the PPAP process for serviceparts and not additional requirements.

Product Code: SVPPAP-1 Version: 1 (2014)







www.aiag.org







http://www.aiag.org/products/products-list/product-details?ProductCode=SVPPAP-1

http://www.aiag.org/products/products-list/product-details?ProductCode=SVPPAP-1


8/17/2019 AIAG 2016 Catlog



SPC QUICKSTART GUIDEThe SPC QSG synthesizes the key information from the SPC Manual down to its core, focusing the new guideline on what is critical and necessary.The Quick Start Guide also designates the levels of importance for different methodologies, so suppliers can prioritize their SPC deployment activities.

Product Code: CQI-25 Version: 1 (2015)Format - Language Member Price Non-Member Price License




SPC SHORT RUN SUPPLEMENT

These guidelines provide more efficient use of control charts in processes where sample size is insufficient (small volume run, service parts, pre-production) to use for standard control charts.






SPECIAL PROCESS: CASTING SYSTEM ASSESSMENTThe goal of the Casting System Assessment is the development of a robust casting process that eliminates common root causes of casting defects.The assessment can be used to assess an organization’s ability to meet customer, regulatory, and the organization’s own requirements, and can alsobe used between an organization and its suppliers to provide a common audit for automotive casting suppliers. This manual includes a CD whichcontains the forms to complete the assessment.


Format - Language Member Price Non-Member Price LicenseHardcopy (English) $69.00 $276.00







8/17/2019 AIAG 2016 Catlog


SPECIAL PROCESS: COATING SYSTEM ASSESSMENT Learn the process requirements your organization needs to follow to develop a coating management system that provides for continual improvement,emphasizing defect prevention and the reduction of variation and waste in the supply chain. This manual includes a CD which contains the forms tocomplete the assessment.




Hardcopy with CD (English) $69.00 $276.00




SPECIAL PROCESS: HEAT TREAT SYSTEM ASSESSMENT Development of a heat treat management system that provides for continual improvement, emphasizing defect prevention and the reduction ofvariation and waste in the supply chain. Manual includes a CD with heat treat system assessment worksheets.




Hardcopy with CD (German) $69.00 $276.00



e-Document (German) $69.00 $276.00 Single user license




www.aiag.org










8/17/2019 AIAG 2016 Catlog



SPECIAL PROCESS: MOLDING SYSTEM ASSESSMENT AIAG’s Molding System Assessment is a common process approach to control molding processes and a methodology to evaluate and remediatecurrent processes. It also provides best practices for continual improvement, emphasizing defect prevention and the reduction of variation and wastein the supply chain, and includes a CD with forms to complete the assessment.






SPECIAL PROCESS: PLATING SYSTEM ASSESSMENT Learn the process requirements your organization needs to follow to develop a plating management system that provides for continual improvement,emphasizing defect prevention and the reduction of variation and waste in the supply chain. This manual includes a CD which contains the forms tocomplete the assessment




Hardcopy with CD (English) $69.00 $276.00Hardcopy with CD (Spanish) $69.00 $276.00










8/17/2019 AIAG 2016 Catlog


SPECIAL PROCESS: SOLDERING SYSTEM ASSESSMENT Development of a soldering management system that provides for continual improvement, emphasizing defect prevention and the reduction ofvariation and waste in the supply chain. Manual includes a CD with the soldering system assessment worksheets.





SPECIAL PROCESS: WELDING SYSTEM ASSESSMENT

Development of a weld management system that provides for continual improvement, emphasizing defect prevention and the reduction of variationand waste in the supply chain. Manual includes a CD with the welding system assessment worksheets.






STATISTICAL PROCESS CONTROL This manual is an introduction to statistical process control and is intended to cover normally occurring SPC system situations. It is not intended tolimit the use of SPC methods suited to particular processes or commodities.

Product Code: SPC-3 Version: 2 (2005)














http://www.aiag.org/products/products-list/product-details?ProductCode=spc-3

http://www.aiag.org/products/products-list/product-details?ProductCode=spc-3



8/17/2019 AIAG 2016 Catlog



SUB-TIER SUPPLIER MANAGEMENT PROCESS GUIDELINE The Supplier Management Process Guideline was developed to address common concerns in the industry. This guideline defines a common processfor suppliers/management fo sub-tier suppliers and provides guidance on effective identification and control of Pass Through Characteristics (PTC).





SUPPLIER & PRODUCT RELIABILITY ASSURANCE

A comprehensive set of Reliability tools and process to manage Product development and Supplier Assessment



CD (English) $29.00 $116.00

SUPPLIER QUALITY REQUIREMENTS 5-PACK Set includes the latest editions of the quality core tools manuals commonized by FCA, Ford Motor Company, & General Motors: APQP, PPAP, FMEA,

MSA, & SPC .

Product Code: CT5-K / CT-S-K




THE COST OF POOR QUALITY GUIDE This guide is designed to help you identify and quantify cost implications of poor quality, effectively communicate these deficiencies to uppermanagement, then prioritize the actions needed for immediate operational improvement and reduction in variation.








http://www.aiag.org/products/products-list/product-details?ProductCode=CT5-K



http://www.aiag.org/products/products-list/product-details?ProductCode=CT5-K



8/17/2019 AIAG 2016 Catlog


TREAD ACT VMRS SYSTEM & ASSEMBLY CODE MAP This document can help to significantly reduce the complexity, increase the accuracy, and speed the process for fulfilling NHTSA’s Early WarningReporting requirements of the TREAD Act.



CD (English) $29.00 $116.00


WARRANTY CLAIMS DATA EXCHANGEA series of transactions based on the ANSI 4010 standard version which includes the format for electronic filing of vehicle registration, warranty

claim filing, response on submitted claims and pre-notice of pending product service notification.

Product Code: E-13 Version: 2 (2003)




Train your entire team on-site!We’ll bring the trainer to you!

Competitive advantageGet the know-how to optimize your products and processes. Ourhighly qualified trainers have extensive knowledge and real-businessexperience to keep your employees aware of the latest information.

Cost advantageTraining at your location costs less per person than public courses.Save on course fees, travel, meals, and lodging by incuring the travel

expense of just 1 instructor.

Time advantageIncrease productivity and reduce the time your employees are awayfrom the job by scheduling training on-site at your convenience. Trainyour entire team on-site at your location and gain the advantage.

Call (248) 358-3003 for more information!

39PUBLICATIONS SUPPLY CHAIN MANAGEMENT

http://www.aiag.org/products/products-list/product-details?ProductCode=XO-THE-8

http://www.aiag.org/products/products-list/product-details?ProductCode=E-13


http://www.aiag.org/products/products-list/product-details?ProductCode=XO-THE-8

8/17/2019 AIAG 2016 Catlog



SUPPLY CHAIN MANAGEMENT

2D DIRECT PARTS MARKING GUIDELINE Provides information for the marking and reading of Data Matrix and/or QR Code symbols marked directly on parts using laser, dot peen and inkjet

technologies.Product Code: B-17 Version: 2 (2009)




2D SYMBOLOGY WHITE PAPER

This white paper presents the study methodology used by the AIAG Symbology Work Group and provides information and recommendations for two-dimensional (2D) symbologies that were chosen.

Product Code: B-13 Version: 2 (2000)



AIAG PALLET AND LID WHITEPAPER 2010

This white paper lists key problems (Identified in the industry Pallet and Lid Survey) and proposes solutions to reduce the loss of control and visibilityof reusable plastic pallets and lids across the automotive industry.

Product Code: RC-13 Version: 1 (2011)







40 SUPPLY CHAIN MANAGEMENT PUBLICATIONS

http://www.aiag.org/products/products-list/product-details?ProductCode=B-17


http://www.aiag.org/products/products-list/product-details?ProductCode=RC-13






8/17/2019 AIAG 2016 Catlog


AUTOMOTIVE HISTORY OF DATA IDENTIFIERSThis document is a summary of the Data Identifier evolution in the automotive industry. It was created to educate the user as to the past andpresent lessons learned and to air the global industry to move forward wisely and expeditiously in the development of next-generation automaticidentification efforts.

Product Code: XO-B-20 Version: 1 (2010)



AUTOMOTIVE HISTORY OF EDI Summary of the Electronic Data Interchange evolution in the automotive industry. Created to educate the user as to the past and present lessonslearned in the development of next-generation EDI iterations.

Product Code: XO-E-18 Version: 1 (2007)



BAR CODE AND TWO-DIMENSIONAL SYMBOLS FOR SHIPPING Specifies the minimum requirements for the design of labels containing linear bar code and two-dimensional symbols on transport units to conveydata between trading partners; provides for traceability of transported units via a unique transport unit identifier (license plate); provides guidance on

the formatting on the label of data presented in linear bar code, two-dimensional symbol or human readable form; provides specific recommendationsregarding the choice of bar code symbologies, and specifies quality requirements and classes of bar code density; makes recommendations as to labelplacement, size and the inclusion of free text and any appropriate graphics; provides guidance on the selection of label material. Product Code: I15394-09 Version: 2 (2009)




BAR CODE PRINT QUALITY TEST SPECIFICATION — LINEAR SYMBOLS This International Standard applies to those symbologies for which a reference decode algorithm has been defined, and which are intended to be readusing linear scanning methods, but its methodology can be applied partially or wholly to other symbologies.






http://www.aiag.org/products/products-list/product-details?ProductCode=XO-B-20

http://www.aiag.org/products/products-list/product-details?ProductCode=XO-E-18







8/17/2019 AIAG 2016 Catlog



BASICS OF EXPORT COMPLIANCEThis document is intended to provide a basic awareness related to the topic of export compliance. Readers should not consider this document toprovide comprehensive export compliance guidance. Further information should be obtained by consulting the regulations identified within thisdocument.





BUSINESS CONTINUITY PLANNING FOR THE AUTOMOTIVE SUPPLY CHAIN

This guide serves as an aid for automotive suppliers in the development of their business continuity programs. Can also be used to validatean existing business continuity program. Hard copy includes CD.

Product Code: M-12 Version: 1 (2007)




CASE STUDY USING RADIO FREQUENCY IDENTIFICATIONThis case study provides proof that a single Radio Frequency Identification (RFID) tag can be used to uniquely identify an Returnable Transport Items(RTI), and potentially the product within the RTI, across the entire supply chain.




CODE 128 BAR CODE SYMBOLOGY SPECIFICATION Manufacturers of bar code equipment and users of bar code technology require publicly available standard symbology specifications to which theycan refer when developing equipment and application standards.





http://www.aiag.org/products/products-list/product-details?ProductCode=TC-7

http://www.aiag.org/products/products-list/product-details?ProductCode=XO-M-12







8/17/2019 AIAG 2016 Catlog


CODE 39 BAR CODE SYMBOLOGY SPECIFICATION Manufacturers of bar code equipment and users of bar code technology require publicly available standard symbology specifications to which theycan refer when developing equipment and application standards.

Product Code: I16388-07 Version: 2 (2007)Format - Language Member Price Non-Member Price License



COLLABORATIVE COMPUTING WHITE PAPER Summarizes the application of collaborative technologies from the perspective of business drivers, processes, and values; addresses the current state

of these technologies from this business perspective.Product Code: E-6 Version: 1 (1998)



COMMON VISIBILITY EVENT DEFINITIONS OF THE FINISHED VEHICLE The primary focus of this document is to lower overall cost of operations, reduce dwell time at shared facilities, increase velocity of vehicles in transit,

lower transit time, improve ability to spot excessive aging, ability to add additional carriers to meet fluctuating demanded, enhancing the ability tocarrier staff to transmit/fix errors if all customers use same communized format.

Product Code: XO-M-21 Version: 1 (2011)



DATA MATRIX BAR CODE SYMBOLOGY SPECIFICATION

Manufacturers of bar code equipment and users of the technology require publicly available standard symbology specifications to which they canrefer when developing equipment and application standards. The publication of standardized symbology specifications is designed to achieve this.




Instant Access!












8/17/2019 AIAG 2016 Catlog



DELFOR (DELIVERY FORECAST MESSAGE)The document provides recommended business practices & technical guidelines for the use of the UN/EDIFACT DELFOR message in global automotiveelectronic business-transactions.

Product Code: XO-E-7 Version: 2 (2007)Format - Language Member Price Non-Member Price License


EDI PRESENTATION WHITE PAPERDocuments process of using the World Wide Web (Web) for Electronic Data Interchange (EDI), outlines the framework of Web EDI, presents thebusiness case, and highlights methods of using Web EDI.

Product Code: E-8 Version: 1 (1999)Format - Language Member Price Non-Member Price License


EDI/XML PROJECT PLANNER Comprehensive planning tool for implementation of supply chain electronic commerce. It is written so business users at all levels, and technical usersat all levels, will find recommendations and detailed steps to follow.

Product Code: E-2 Version: 4 (2007)Format - Language Member Price Non-Member Price License



ELECTRONIC PROOF OF DELIVERY STANDARDEPOD is a standardized electronic proof of delivery system that provides an electronic time and date stamp as well as condition of the vehicle as

delivered to the destination dealer. The report is verified by signature; delivery information is communicated on the same real-time basis to all of theparties involved.






C S S S OC SS


http://www.aiag.org/products/products-list/product-details?ProductCode=e-8







http://www.aiag.org/products/products-list/product-details?ProductCode=F-1


8/17/2019 AIAG 2016 Catlog


EVALUATED RECEIPTS SETTLEMENT (ERS) PROCESSIndustry standard practice and implementation guideline for evaluated receipts settlement (ERS) process for production and non-productionapplications is specifically designed to eliminate supplier invoices as unnecessary documents.

Product Code: F-1 Version: 2 (1996)Format - Language Member Price Non-Member Price License



FINANCIAL MANAGERS’ GUIDE TO EDI Guide provides documentation of the financial activities associated with the procurement and payment business process. It provides advice when

companies automate various methods of invoice entry and payment authorization.Product Code: F-4 Version: 2 (1999)




FINISHED VEHICLE LOGISTICS QUALITY HANDLING MANUAL

Improves operations by reducing duplicated activities and provides a common vehicle handling guideline between the European Union and NorthAmerica.





FINISHED VEHICLE LOGISTICS TRANSPORT DAMAGE REPORTINGThe process for making transportation claims has evolved. This new, 2014 update will give you everything you need to know for making transportationclaims. Expedite your claims handling process with this updated guideline to save you time and money.






FREIGHT CONTAINERS ELECTRONIC SEALS PART 5 PHYSICAL LAYER



http://www.aiag.org/products/products-list/product-details?ProductCode=m-23








8/17/2019 AIAG 2016 Catlog



FREIGHT CONTAINERS - ELECTRONIC SEALS - PART 5: PHYSICAL LAYERDescribes the physical layer for supply chain applications of RFID for freight containers in accordance with the ISO 18185 series and ISO 17363, sinceit is expected that the implementation of these standards will face the same international conditions.

Product Code: XO-I181855-07 Version: 1 (2007)Format - Language Member Price Non-Member Price License


GAS CYLINDER IDENTIFICATION LABEL STANDARD Application specification provides acceptable method for permanent cylinder identification applicable to both customer and supplier, including layout,data content and other label requirements.

Product Code: B-9 Version: 3 (2004)Format - Language Member Price Non-Member Price License



GLOBAL CARRIERS & LOGISTICS SERVICE PROVIDERS EVALUATION This evaluation document has been prepared to assist organizations in developing and implementing a world class Materials Planning & Logisticsmanagement system.



Downloadable File (English) $29.00 $116.00

GLOBAL DELJIT MESSAGE (JUST IN TIME DELIVERY)Provides recommended business practices and technical guidelines for using the UN/EDIFACT DELJIT message. This global document was created as

a joint effort of AIAG, JAMA/JAPIA and Odette.Product Code: XO-E-12 Version: 2 (2008)




GLOBAL DESADV MESSAGE (DESPATCH ADVICE)



http://www.aiag.org/products/products-list/product-details?ProductCode=M-16








8/17/2019 AIAG 2016 Catlog


GLOBAL DESADV MESSAGE (DESPATCH ADVICE)Provides recommended business practices and technical guidelines for the use of the UN/EDIFACT DESADV message in automotive electronicbusiness-transactions. DESADV message corresponds to the ASC X12 856 Despatch Advice message.

Product Code: XO-M-11 Version: 2 (2007)Format - Language Member Price Non-Member Price License


GLOBAL INVOIC MESSAGE (INVOICE)Global Invoice EDIFACT Guideline is a joint effort of AIAG, JAMA/JAPIA and Odette to elaborate a harmonized electronic invoice message as commonstandard for a global use in the automotive industry. Document provides recommended business practices and technical guidelines.

Product Code: XO-E-14 Version: 3 (2008)Format - Language Member Price Non-Member Price License


GLOBAL MATERIALS MANAGEMENT LOGISTICS AGREEMENT (GMMLA) This Global Material Management Logistics Agreement (GMMLA) recommendation contains operational guidelines for a materials management andlogistics agreement between parties.

Product Code: M-17 Version: 1 (2008)Format - Language Member Price Non-Member Price License



RETURNABLE TRANSPORT ITEMS (RTI)

LOST AND FOUNDConnecting lost RTIs to whom they belong

The RTI Return Portal was conceived to reunite lost RTIs with theirowners through a powerful, easy-to-use information-sharing system.

Available FIrst Quarter 2016!

http://rti.aiag.org


GLOBAL MMOG/LE - VERSION 4







http://www.aiag.org/products/products-list/product-details?ProductCode=M7-4


8/17/2019 AIAG 2016 Catlog



GLOBAL MMOG/LE - VERSION 4 The purpose of the MMOG/LE - Version 4 is to provide a single assessment tool that enables a comprehensive evaluation of MP&L performanceand capability. (One purchase per location site.) The MMOG/LE tool enables organizations in the global automotive supply chain to conduct acomprehensive evaluation of its supply chain capability and performance.

One of the major amendments incorporated into version 4 is the development of MMOG/LE “Basic” which is a filtered version of the “Full” MMOG/LEassessment, to be used by the tiered supply base to assess their sub-suppliers.

The “Full” version 4 contains 197 MMOG/LE criteria. The “Basic” version 4 is a subset of the “Full” criteria within the same document, made availablethrough the use of filters.

Product Code: M7-4 Version: 4 (2014)



GLOBAL RECEIVING ADVICEThe Global Receiving Advice elaborates a harmonized receiving message as a common standard for global use in the automotive industry. Theguideline documents various business scenarios, activities, and data requirements as UML models mapped to the UN/EDIFACT messages and coversthe receipt process and its variance including reporting of discrepancies associated with the receipt of goods.

Product Code: XO-M-13 Version: 2 (2007)



GLOBAL REMITTANCE ADVICEA joint effort of AIAG, JAMA/JAPIA, and Odette to elaborate a harmonized electronic remittance advice message as common standard for a globaluse in the automotive industry.







GLOBAL TRANSPORT LABEL STANDARD FOR THE AUTOMOTIVE INDUSTRY









8/17/2019 AIAG 2016 Catlog


GLOBAL TRANSPORT LABEL STANDARD FOR THE AUTOMOTIVE INDUSTRY Global automotive industry standard that describes the format for a common transport label design to facilitate the movement of goods and theexchange of data among all members of the supply chain.




GLOBAL VEHICLE DAMAGE CODES LAMINATED CARDS These cards detail the standardized set of codes for reporting finished vehicle damage during the transportation process, including coding for definingdamage area, type and severity. These cards are offered in increments of 50 per order, and do not include the associated document (availableseparately).

Product Code: DMG-1(F) Version: 1 (2009)


Laminated Cards (English) $29.00 $116.00

Laminated Cards (French) $29.00 $116.00

GUIDELINES FOR DIRECT PART MARKING (DPM) Describes several methods for applying permanent machine-readable symbols to items - including components, parts and products - using the directpart marking (DPM) methods outlined herein.




IMPLEMENTATION GUIDELINES VERSION 004010AIAG This industry EDI implementation guideline, with 31 transaction sets, supports the ASC X12 version/release 004010 EDI standard. Use of thesedocuments should be cleared with your trading partner.

Product Code: EG-8 Version: 2 (1998)



CD (English) $29.00 $116.00


INFORMATION KIT FOR IMPORTING INTO CANADA


http://www.aiag.org/products/products-list/product-details?ProductCode=DMG-1


http://www.aiag.org/products/products-list/product-details?ProductCode=EG-8

http://www.aiag.org/products/products-list/product-details?ProductCode=EG-8


http://www.aiag.org/products/products-list/product-details?ProductCode=DMG-1




8/17/2019 AIAG 2016 Catlog



INFORMATION KIT FOR IMPORTING INTO CANADA Information to assist suppliers in achieving complete, accurate and consistent compliance with government requirements and regulations ofshipments into Canada.

Product Code: TC-2 Version: 3 (2003)Format - Language Member Price Non-Member Price License



INFORMATION KIT FOR IMPORTING INTO MEXICO Information to assist suppliers in achieving complete, accurate and consistent compliance with government requirements and regulation of shipmentinto Mexico. Mexico Customs Law references and labeling requirements included.





INFORMATION KIT FOR IMPORTING INTO THE UNITED STATES

Information to assist suppliers in achieving complete, accurate and consistent compliance with government requirements and regulations ofshipments into the United States. Includes latest information on BRASS and FAST.







INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE









8/17/2019 AIAG 2016 Catlog


INFORMATION TECHNOLOGY AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - QR CODE BAR CODE SYMBOLOGY SPECIFICATIONISO/IEC 18004:2015 defines the requirements for the symbology known as QR Code. It specifies the QR Code symbology characteristics, datacharacter encoding methods, symbol formats, dimensional characteristics, error correction rules, reference decoding algorithm, production quality

requirements, and user-selectable application parameters.





INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEMMANAGEMENT - IMPLEMENTATION GUIDELINES - PART 1: RFID-ENABLED LABELS AND PACKAGING SUPPORTING ISO/IEC 18000-6CISO/IEC TR 24729-1:2008 provides guidance on the use of radio frequency identification (RFID) enabled labels and packaging in the supply chain.Guidance is provided for transponder selection, as well as the selection of media, adhesives, facestocks, and inks. Techniques are described tominimize electrostatic discharge and transponder damage.




INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEMMANAGEMENT - PART 2: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS BELOW 135 KHZ ISO/IEC 18000-2:2004; Information Technology - Radio Frequency Identification for Item Management - Part 2: Parameters for Air InterfaceCommunications Below 135 kHz. defines the air interface for radio-frequency identification (RFID) devices operating below 135 kHz used in item

management applications. Its purpose is to provide a common technical specification for RFID devices to allow for compatibility and to encourageinter-operability of products for the growing RFID market in the international marketplace.



e-Document (English) $240.00 $240.00

Instant Access!



INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE















8/17/2019 AIAG 2016 Catlog



PERFORMANCE TEST METHODS - PART 3: TEST METHODS FOR TAGPERFORMANCE ISO/IEC 18046-3:2012 defines test methods for performance characteristics of RFID tags for item management, and specifies the generalrequirements and test requirements for tags which are applicable to the selection of the devices for an application. The summary of the test reportsforms a unified tag datasheet.




INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FORITEM MANAGEMENT - PART 7: PARAMETERS FOR ACTIVE AIR INTERFACE COMMUNICATIONS AT 433 MHZISO/IEC 18000-7:2014 defines the air interface for radio frequency identification (RFID) devices operating as an active RF tag in the 433 MHz bandused in item management applications. It provides a common technical specification for RFID devices that can be used by ISO technical committeesdeveloping RFID application standards.




INFRASTRUCTURE FOR PLANT-TO-BUSINESS (P2B) INTEROPERABILITY Document describes the typical IT infrastructure domains relevant to the manufacturing enterprise and their general requirements.









INTERCONTINENTAL PALLET AND CARTON STANDARD














8/17/2019 AIAG 2016 Catlog


The International Pallet Standard maximizes efficiency and reduces costs for global supply chains, by minimizing the number of regional andinternational standard pallet sizes for disposable and re-usable packaging in use.

Product Code: RC-12 Version: 2 (2012)Format - Language Member Price Non-Member Price License



IV&I MIN/MAX REPLENISHMENT Information collected and summarized in this document relates to the forecasted future state of the inventory visibility tools for the Min/Max businessprocess and their intended use by the automotive supply chain.

Product Code: IBP-1 Version: 1 (2005)




JOINT AUTOMOTIVE INDUSTRY FORUM (JAIF) CHINA B2B

The JAIF recognizes that many domestic and joint venture companies have been conducting business in China for several years. During this time,these companies may have developed and implemented B2B messaging methodologies and systems to meet their current needs. Respecting thissituation, the JAIF recommendation serves to guide future investment and development so that collectively, domestic and joint venture companies canmore toward and realize the benefits of the JAIF B2B messaging recommendation.





JOINT AUTOMOTIVE INDUSTRY FORUM (JAIF) GLOBAL GUIDELINE FOR RETURNABLE TRANSPORT ITEMS This global guideline recommends the basic features of data carriers applied to returnable transport items for use within the Layer 2 and Layer 3 ofthe supply chain.

Product Code: XO-RC-6 Version: 2 (2010)

Format - Language Member Price Non-Member Price Licensee-Document (English) FREE $116.00 Single user license


JOINT AUTOMOTIVE INDUSTRY FORUM (JAIF) GLOBAL RADIO FREQUENCY

http://www.aiag.org/products/products-list/product-details?ProductCode=IBP-1


http://www.aiag.org/products/products-list/product-details?ProductCode=XO-RC-6





http://www.aiag.org/products/products-list/product-details?ProductCode=IBP-1




8/17/2019 AIAG 2016 Catlog



IDENTIFICATION (RFID) As the basis for global standards, this guide describes best practices, processes, and methods for item identification, verification, traceability, productcharacteristics and Vehicle Identification Number (VIN2) throughout the global automotive supply chain.





KEY PERFORMANCE INDICATORS FOR GLOBAL MATERIAL MANAGEMENT The Key Performance Indicators for Global Material Management and Logistics provides recommended business practices for the evaluation of

supplier delivery performance between trading partners.





LABELING AND DIRECT PRODUCT MARKING WITH LINEAR BAR CODEManual establishes the machine-readable (linear, two dimensional, and composite symbols) and human readable content for direct marking andlabeling of items, parts, and components.

Product Code: XO-I28219-09








MANUFACTURING ASSEMBLY PILOT (MAP) PROJECT FINAL REPORT Thi t t th fi di f th t il t j t hi h ht t i t i l d i f ti fl ithi f ti t bl










8/17/2019 AIAG 2016 Catlog


This report presents the findings of the two-year pilot project which sought to improve material and information flow within a four-tier seat assemblysupply chain.



MATERIALS OFF-SHORE SOURCING (MOSS) PROJECT The information provided in the Materials Off-Shore Sourcing document is intended to assist individuals to identify and assess opportunities toimprove supply chain logistics involving ocean shipments incoming to the United States.

Product Code: XO-M-19 Version: 1 (2009)Format - Language Member Price Non-Member Price License


OPTIMUM SHIPPING & RECEIVING SYSTEMS HANDBOOK This publication helps the user design a world-class automotive shipping and receiving system. Regulatory standards, automotive mandates, best-practice guidelines, application issues, and other considerations are covered.




PACKAGING DATA FORMPackaging Data Forms across various companies are somewhat similar yet all unique. This means suppliers fill out the same data over and over oneach unique form. The AIAG Standard Packaging Data Form is designed to eliminate this repetition, saving you time and reducing the potential for

error.



Adobe PDF File (English) FREE FREE Single user license

Instant Access!



PARTS IDENTIFICATION & TRACKING APPLICATION STANDARD Outlines the symbologies recommended for automotive part identification and tracking Recommends the use of the linear symbologies Code 39 or






http://www.aiag.org/products/products-list/product-details?ProductCode=b-4


8/17/2019 AIAG 2016 Catlog



Outlines the symbologies recommended for automotive part identification and tracking. Recommends the use of the linear symbologies, Code 39 orCode 128, or the 2-D symbologies, Data Matrix or QR Code.





PLANT-TO-BUSINESS (P2B) COMMON DATA FORMAT FOR COMMUNICATING Guideline

identifies most common methods of Quality Measurement Data Communication for Measurement, Test and Assembly systems (MTA Systems) in usetoday as specified by major manufacturing companies.




QUALITY ASSURANCE GUIDELINE FOR SHIPPING LABELS

Provides a practical guide to trading partner label quality assurance.Product Code: B-8 Version: 3 (2010)








RECOMMENDED BUSINESS PRACTICE FOR LONG DISTANCE SUPPLY CHAIN Recommended practices for managing the information driving long distance supply chains








8/17/2019 AIAG 2016 Catlog


Recommended practices for managing the information driving long-distance supply chains.


Format - Language Member Price Non-Member Price LicenseHardcopy (English) $29.00 $116.00


RETURNABLE CONTAINERS MANAGEMENT GUIDELINE This guideline represents a recommended framework for the effective management of returnable containers to maximize utilization and minimizecosts for all users.




RETURNABLE CONTAINERS PERFORMANCE TEST GUIDELINES This guideline provides testing procedures for four types of containers: hand-held, bulk pack and pallet pack, pallet/knock-down and unitized load

containers. Each test gives a detailed explanation of the purpose and objective of the test.Product Code: RC-9 Version: 3 (2015)




RETURNABLE TRANSPORT ITEM TRACKING (RFID PILOT) WHITE PAPER

Provides the activities and lessons learned from the RFID Pilot for Returnable Containers.





Instant Access!



RETURNABLE TRANSPORT ITEMS VISIBILITY BEST PRACTICESProvides a number of best practices businesses can employ to increase visibility when sending Returnable Transport Items (RTIs) back to their points









8/17/2019 AIAG 2016 Catlog







Provides a number of best practices businesses can employ to increase visibility when sending Returnable Transport Items (RTIs) back to their pointsof origin once the parts they contained have been used.




RETURNABLE WHEEL PACKS TRANSPORTED BY TRUCK These specifications define the overall dimensions, layout, sizes, materials and key features of the wheel shipping system. This wheel shippingsystem, referred to as the wheel pack, provides an alternative to the steel wheel rack.






SCACTIL - STANDARD CARRIER ALPHA CODE TRAILER ID LABEL Application standard defines specifications for printing and placing labels to automatically identify a freight carrier’s trailer or van.






SINGLE-AND MULTI-USE CONTAINER SYSTEMS GUIDELINE This document represents a recommended framework suitable for effective implementation of single and multi-use containers. It supports the







8/17/2019 AIAG 2016 Catlog


This document represents a recommended framework suitable for effective implementation of single and multi use containers. It supports themovement toward returnable versus expendable containers and resulting recycling efforts.




SPECIFICATION FOR SECURITY MANAGEMENT SYSTEMS These specifications describe a small parts container accepted by industry members of AIAG and the Industrial Fastener Institute (IFI) to efficientlyship fasteners and other small parts.




STANDARDIZED BILL OF LADING The objective of standardizing the Bill of Lading is to ensure that the shipper, the carrier, and the customer (the consignee) are all getting theinformation they need for the processing of the goods through the supply chain.




CD (English) $29.00 $116.00

SUPPLIER CONTENT REPORTING REQUIREMENTS WORKBOOK

Includes NAFTA requirements, plus an in-depth discussion of the NAFTA Rules of Origin, content reporting business process, supplier compliancerequirements with the AALA regulations, and a resource section.

Product Code: TCPCW-1 Version: 5 (2006)





SUPPLIER ELECTRONIC NETWORK CONNECTIVITY To be competitive in a global economy, the market demands fast, accurate, secure, and efficient global connectivity. Meeting those needs requires



http://www.aiag.org/products/products-list/product-details?ProductCode=TCPCW-1

http://www.aiag.org/products/products-list/product-details?ProductCode=TCPCW-1





8/17/2019 AIAG 2016 Catlog




various telecommunication and network solutions ranging from high volume/high security to low volume/low security alternatives.

Product Code: D-33 Version: 1 (2011)Format - Language Member Price Non-Member Price License



SUPPLY CHAIN SECURITY TOOLKIT FOR THE AUTOMOTIVE INDUSTRY This toolkit clarifies and harmonizes supply chain security practices among OEMS, Suppliers, Carriers and others in the supply chain. This documentincludes many tools to help supply chain parties address C-TPAT. Version 1 - 5/2007.





CD (English) $29.00 $116.00

SYNTAX FOR HIGH CAPACITY ADC MEDIADefines the manner in which data is transferred to high-capacity automatic data capture (ADC) media from a supplier’s information system and themanner in which data is transferred to the recipient’s information system.




T.120 AUTOMOTIVE DATA CONFERENCING ARCHITECTURE Document describes the industry-standard International Telecommunications Union T.120 Data Conferencing specification, and discusses how itoperates over the Internet and ANX.





TRADING PARTNER LABELS IMPLEMENTATION GUIDELINE Describes the template for bar code labels on shipping containers - both unit loads and transport packages. Physical parameters of the symbols and

http://www.aiag.org/products/products-list/product-details?ProductCode=XO-TC-6





http://www.aiag.org/products/products-list/product-details?ProductCode=XO-TC-6



8/17/2019 AIAG 2016 Catlog


labels are provided and a bar code quality level is specified.





TRANSACTION SET 824This Transaction Set is included with the EG-8PUSH and the EG-8PULL.

Product Code: EG-824 TRANS



USER’S GUIDE FOR CORRUGATED PLASTIC This document was prepared for use as a general guideline on the characteristics and uses of corrugated plastic packaging. This guideline will clarify

the complexity and define the usage of corrugated plastic material.Product Code: RC-4 Version: 1 (1989)



VEHICLE ID NUMBER (VIN) LABEL APPLICATION STANDARDThis application specification provides guidelines for printing a vehicle identification number in a bar coded form on a label to be attached to a motor

vehicle. This specification is to be used with SAE J-272 and SAE J-1877.




61TRAINING

World-Class Training and Certification ProgramsA variety of training formats ensure that your employees and extended supply chain are provided with a consistent message and top-quality

CONFLICT MINERALS REPORTING

http://www.aiag.org/products/products-list/product-details?ProductCode=EG-824%20TRANS





http://www.aiag.org/products/products-list/product-details?ProductCode=EG-824%20TRANS

8/17/2019 AIAG 2016 Catlog


* Courses are scheduled based on demand. Contact us at [email protected] or (248) 358-3003 for more information.

** Plexus Corp. is the Exemplar Global-Certified course provider for training at AIAG.*** NOTE: Attendance to the entire course is required to receive a Certificate of Attendance with CEUs.

educational experience – no matter where they are located.

• In Person: Open enrollment courses are offered at AIAG’s headquarters in Southfield, Michigan.• Online: Many of our courses are now available online if you prefer to engage in training from the comfort of your own home or office.• On-Site: If you have a team that needs their skills refreshed or updated, AIAG’s expert trainers can bring almost any course

offered in this catalog to your location.

CONFLICT MINERALS REPORTING

iPOINT CONFLICT MINERALS PLATFORM (iPCMP) This instructor led course is designed to ensure users of the system are familiar with all aspects of receiving and submitting data related to ongoing

customer requests to comply with the Securities and Exchange Commission (SEC) Dodd- Frank, Section 1502, Conflict Minerals Rule.

Date(s) Time(s) Member Price Non-Member Price

January 19, 2016 9:00 AM to 4:00 PM $295.00 $395.00

February 16, 2016 9:00 AM to 4:00 PM $295.00 $395.00

March 15, 2016 9:00 AM to 4:00 PM $295.00 $395.00

April 12, 2016 9:00 AM to 4:00 PM $295.00 $395.00

May 19, 2016 9:00 AM to 4:00 PM $295.00 $395.00

June 14, 2016 9:00 AM to 4:00 PM $295.00 $395.00

July 20, 2016 9:00 AM to 4:00 PM $295.00 $395.00

August 16, 2016 9:00 AM to 4:00 PM $295.00 $395.00

September 20, 2016 9:00 AM to 4:00 PM $295.00 $395.00

October 12, 2016 9:00 AM to 4:00 PM $295.00 $395.00

November 9, 2016 9:00 AM to 4:00 PM $295.00 $395.00

December 7, 2016 9:00 AM to 4:00 PM $295.00 $395.00

62 TRAINING

CORPORATE RESPONSIBILITY

AIAG SUPPLY CHAIN SUSTAINABILITY ELEARNING

CORPORATE RESPONSIBILITY /CUSTOMS & EXPORT COMPLIANCE

http://www.aiag.org/training/training-list/training-details?CourseCode=IPCMP

http://www.aiag.org/training/training-list/training-details?CourseCode=IPCMP

http://www.aiag.org/training/training-list/training-details?CourseCode=ELSCS12


8/17/2019 AIAG 2016 Catlog


This free on-line course highlights fundamental principles of responsible working conditions and expectations of FCA, Ford, General Motors, Honda,Toyota and Daimler and is based on the Automotive Industry Guiding Principles to Enhance Sustainability Performance in the Supply Chain. This basic

overview includes the areas of Child Labor, Forced Labor, Freedom of Association, Harassment and Discrimination, Health and Safety, Wages andBenefits, and Working Hours, as well as Environmental Responsibility and Business Ethics.


On-line Course (anytime) On-line Course (anytime) FREE FREE

SUPPLY CHAIN SUSTAINABILITY KNOWLEDGE ASSESSMENT This free on-line assessment is based on the Automotive Industry Guiding Principles to Enhance Sustainability Performance in the Supply Chain. Itincludes terms and knowledge common to the automotive industry and is designed to help ‘on-board’ employees who have been assigned to lead orchampion their company’s sustainability efforts.

We encourage you to take the Supply Chain Sustainability eLearning course before participating in the Knowledge Assessment.


On-line Course (anytime) On-line Course (anytime) FREE FREE

CUSTOMS & EXPORT COMPLIANCE

HTS HARMONIZED TARIFF SCHEDULE OVERVIEW Ensure that you are compliant with customs regulations and paying the proper duty on your products. Classification is the foundation for all customstransactions, including the North American Free Trade Agreement (NAFTA). Correct classification of your products is essential for determining theappropriate fees. The Harmonized Tariff System (HTS) provides duty rates for virtually every item that exists. Materials managers, purchasing orbuyers, customs trade importers and exporters, finance management and sales managers alike will benefit from learning how to read the U.S. Tariff,the general rules for interpretation and how to determine the correct HTS Code classification for your products in this full-day class.

Special Pricing: To attend HTS and NAFTA together, contact AIAG Customer Service at (248) 358-3003. Member rate: $800 | Non-member rate: $1,075 CEUs: 0.80***


March 1, 2016 8:00 AM - 5:00 PM $375.00 $450.00

June 28, 2016 8:00 AM - 5:00 PM $375.00 $450.00

September 27, 2016 8:00 AM - 5:00 PM $375.00 $450.00

December 13, 2016 8:00 AM - 5:00 PM $375.00 $450.00

63TRAINING

NAFTA CONTENT REPORTING Developed for the automotive industry, this course addresses the NAFTA requirements that are specific to automotive products, including automotive

CUSTOMS & EXPORT COMPLIANCE /ENGINEERING


http://www.aiag.org/training/training-list/training-details?CourseCode=SCSKA

http://www.aiag.org/training/training-list/training-details?CourseCode=HTS

http://www.aiag.org/training/training-list/training-details?CourseCode=HTS

http://www.aiag.org/training/training-list/training-details?CourseCode=SCSKA


http://www.aiag.org/training/training-list/training-details?CourseCode=NAFTA

http://www.aiag.org/training/training-list/training-details?CourseCode=NAFTA

8/17/2019 AIAG 2016 Catlog



** Plexus Corp. is the Exemplar Global-Certified course provider for training at AIAG.*** NOTE: Attendance to the entire course is required to receive a Certificate of Attendance with CEUs.

traced values. Benefit from NAFTA and learn how to properly prepare Certificates of Origin, and understand content reporting laws, rules of origin andproof of origin requirements. A participant’s guide and Supplier Content Reporting Workbook are provided.

Special Pricing: To attend HTS and NAFTA together, contact AIAG Customer Service at (248) 358-3003. Member rate: $800 | Non-member rate: $1,075 CEUs:1.50***


March 2-3, 2016 8:00 AM - 5:00 PM $625.00 $825.00

June 29-30, 2016 8:00 AM - 5:00 PM $625.00 $825.00

September 28-29, 2016 8:00 AM - 5:00 PM $625.00 $825.00

December 14-15, 2016 8:00 AM - 5:00 PM $625.00 $825.00

ENGINEERING

ADVANCED GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) This course is intended to enable participants to apply and interpret the concepts and benefits of specifying and dimensioning products usingfunctional quotation, tolerance of form, and position. Participants will construct a clear vision of the existing paradox within the industry. Example:“Why this characteristic is non-conforming to the specification and the part mounts function well in the product?” or “Why the part is within the

specification, but doesn’t mount or work properly with the customer?”

CEUs:1.50***


March 8-9, 2016 8:00 AM - 5:00 PM $625.00 $825.00

July 12-13, 2016 8:00 AM - 5:00 PM $625.00 $825.00

October 25-26, 2016 8:00 AM - 5:00 PM $625.00 $825.00

Explanation of Symbols

College Credit AvailableCertificate Awarded

Online Registration

On-site Available

E-learning/E-Training International

64 TRAINING

GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) This course is an overview of the GD&T concepts in controls necessary for proper layout and applications. The course will cover typical issues that

G

ENGINEERING /GLOBAL CHEMICAL REGULATORY

http://www.aiag.org/training/training-list/training-details?CourseCode=GDTA

http://www.aiag.org/training/training-list/training-details?CourseCode=GDTA

http://www.aiag.org/training/training-list/training-details?CourseCode=GDT

http://www.aiag.org/training/training-list/training-details?CourseCode=GDT

8/17/2019 AIAG 2016 Catlog


can occur when applying a traditional coordinate system and how Geometric Tolerance can overcome them. You will be introduced to the symbols,terminology and the rules for GD&T based on ASME Y14.5:2009.

CEUs: 0.80***


March 7, 2016 8:00 AM - 5:00 PM $325.00 $425.00

July 11, 2016 8:00 AM - 5:00 PM $325.00 $425.00

October 24, 2016 8:00 AM - 5:00 PM $325.00 $425.00

GLOBAL CHEMICAL REGULATORYCOURSE 1 - REGULATIONS: MANAGEMENT AND COMPLIANCE This one-hour training course provides participants with an introduction to global chemical regulations with a focus on managing the proliferation ofglobal environmental regulations and the importance of developing compliance strategies from product design to end-of-vehicle life.


On-line course (anytime) On-line course (anytime) FREE $250.00

COURSE 2 - GLOBAL PRODUCT REGULATION OVERVIEW This 80-minute training course builds on course 1 providing participants with an overview of various global chemical regulations including adescription of the regulation, how it applies to the automotive supplier or OEM, upcoming deadlines or actions, and important regulatory changes oractivities.



COURSE 3 - MANAGEMENT OF PRODUCT CHEMICALREGULATORY COMPLIANCEThis 4-hour interactive training course provides participants an in-depth discussion of managing global chemical regulatory compliance with specificemphasis on responsibility within functional roles, managing the supply chain, data collection, and material content reporting.



65TRAINING

ON THE JOB WITH GHS ELEARNING This 90-minute eLearning course provides GHS Training, addressing Hazard Communication changes in the Workplace. Students will learn abouth d i i l h SDS d l b l d b h GHS i d h i ill ff h i h k l E h i ill b l d

GLOBAL CHEMICAL REGULATORY /ISO 14001

http://www.aiag.org/training/webcasts




http://www.aiag.org/training/training-list

http://www.aiag.org/training/training-list

8/17/2019 AIAG 2016 Catlog



** Plexus Corp. is the Exemplar Global-Certified course provider for training at AIAG.

*** NOTE: Attendance to the entire course is required to receive a Certificate of Attendance with CEUs.

hazard communication tools, such as SDS and labels, and about what GHS is and how it will affect them in the workplace. Emphasis will be placed oninterpretation of labels and label elements, including GHS symbols, signal word, hazard statements, and precautionary statements.


On-line course (anytime) On-line course (anytime) $40.00 $60.00

ISO 14001

EXEMPLAR GLOBAL-CERTIFIED ISO 14001 EMS LEAD AUDITOR** This in-depth course gives you the skills and tools necessary to become an effective lead auditor in your organization. Hands-on class work, exercises

and case studies will prepare you to effectively run your internal audit, as well as oversee internal auditors during the course of an audit. Learn arange of internal EMS auditing skills that will help you become a strong advocate and auditor in your company’s effort to obtain maximum value fromyour commitment to environmental issues. Gain confidence in your audit skills - from planning through reporting the results. In addition, acquire actualexperience working as a member of a functioning audit team during the course. This course is certified by Exemplar Global and meets the trainingportion of the requirements for certification of individual QMS auditors.

CEUs: 3.60***


February 8-12, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00June 13-17, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00

October 24-28, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00

INTEGRATING ISO 14001 AND ISO 9001 Acquire the skills and understanding necessary to squeeze the full benefits for your company from ISO 14001. This course is designed to help youintegrate ISO 14001 and ISO 9001 as efficiently and cost effectively as possible. Learn how to analyze the requirements of the new standard andincorporate them into your current ISO 9001 practices to achieve full compliance with minimal disruption.

CEUs: 1.50***


On Demand* 8:00 AM - 5:00 PM $625.00 $825.00

66 TRAINING

INTEGRATING ISO 14001 AND ISO/TS 16949 This course is designed to help you integrate ISO 14001 and ISO/TS 16949 as efficiently and cost effectively as possible. Learn how to analyze therequirements of the new standard and incorporate them into your current ISO/TS 16949 practices to achieve full compliance with minimal disruption

ISO 14001

http://www.aiag.org/training/training-list/training-details?CourseCode=LAFK

http://www.aiag.org/training/training-list/training-details?CourseCode=FKIS

http://www.aiag.org/training/training-list/training-details?CourseCode=FKIS

http://www.aiag.org/training/training-list/training-details?CourseCode=LAFK

http://www.aiag.org/training/training-list/training-details?CourseCode=FKTS

http://www.aiag.org/training/training-list/training-details?CourseCode=FKTS

8/17/2019 AIAG 2016 Catlog


requirements of the new standard and incorporate them into your current ISO/TS 16949 practices to achieve full compliance with minimal disruption.You will also learn to address key issues in environmental management, as well as the benefits of an environmental management system (EMS) and

ISO 14001. CEUs: 1.50***


On Demand* 8:00 AM - 5:00 PM $625.00 $825.00

ISO 14001 EXECUTIVE UNDERSTANDING Learn the concepts of ISO 14001 environmental management system (EMS) and how the standard can become a valuable part of your businessmanagement system. Engage in activities that create an understanding of the standard and learn the intent and benefits for your businessmanagement system.

CEUs: 0.80***


On Demand* 8:00 AM - 5:00 PM $325.00 $425.00

ISO 14001 EMS UNDERSTANDING AND INTERNAL AUDITING Learn a range of internal EMS auditing skills that will help you become a strong advocate and auditor in your company’s effort to obtain maximumvalue from your commitment to environmental issues. Gain confidence in your audit skills - from planning through reporting the results. Acquire actualexperience working as a member of a functioning audit team during the course. CEUs: 2.40***


March 1-3, 2016 8:00 AM - 6:00 PM $995.00 $1,195.00

July 18-20, 2016 8:00 AM - 6:00 PM $995.00 $1,195.00November 1-3, 2016 8:00 AM - 6:00 PM $995.00 $1,195.00



Online Registration

On-site Available


67TRAINING

ISO 26262: FUNCTIONAL SAFETY

AUDITING TO ISO 26262: FUNCTIONAL SAFETY MANAGEMENT SYSTEMS STANDARDS

ISO 26262: FUNCTIONAL SAFETY

http://www.aiag.org/training/training-list/training-details?CourseCode=FKEU

http://www.aiag.org/training/training-list/training-details?CourseCode=IAFK

http://www.aiag.org/training/training-list/training-details?CourseCode=IAFK

http://www.aiag.org/training/training-list/training-details?CourseCode=FKEU

http://www.aiag.org/training/training-list/training-details?CourseCode=262AU



8/17/2019 AIAG 2016 Catlog





SYSTEMS STANDARDSThis course is designed to help your company prepare for the skills required to audit ISO 26262 Functional Safety Requirements as a standalone and

integrated system. This class will give you the information to Plan, Conduct and Report audit activities for ISO. This standard is an adaptation of theFunctional Safety Standard IEC 61508 for the specifics of automotive electric/electronic systems. It is to be applied to safety related Systems thatinclude electric/electronic systems that are installed in production passenger vehicles.


March 14-18, 2016 8:00 AM to 5:00 PM $1,895.00 $2,095.00

October 17-21, 2016 8:00 AM to 5:00 PM $1,895.00 $2,095.00

ISO 26262 OVERVIEW: FUNCTIONAL SAFETY MANAGEMENT SYSTEMS This course is designed to provide your company’s management team with a general understanding of the ISO 26262 standard. It will provide thenecessary information for making informed decisions regarding the implementation of a Functional Safety Management System that conforms to ISO26262. This standard is an adaptation of the Functional Safety standard IEC 61508 for the specifics of Automotive Electric/Electronic Systems.


March 4, 2016 8:00 AM - 5:00 PM $325.00 $425.00

October 13, 2016 8:00 AM - 5:00 PM $325.00 $425.00

UNDERSTANDING ISO 26262: FUNCTIONAL SAFETY MANAGEMENT SYSTEMSThis class will give you the information necessary to implement the functional safety standard ISO 26262. This standard is an adaptation of theFunctional Safety standard IEC 61508 for the specifics of automotive electric/electronic systems. It is to be applied to Safety Related Systems thatinclude one or more electric/electronic systems that are installed in production passenger vehicles.


February 29-March 4, 2016 8:00 AM - 5:00 PM $1,895.00 $2,095.00

October 3-7, 2016 8:00 AM - 5:00 PM $1,895.00 $2,095.00

68 TRAINING

ISO/IEC 17025

ISO/IEC 17025:2005 INTERNAL QUALITY AUDITING TRAINING In this course, develop a foundation for auditing compliance to, and implementation of, the ISO/IEC 17025 standard. Hands-on instruction with a

ISO/IEC 17025


http://www.aiag.org/training/training-list/training-details?CourseCode=262EO

http://www.aiag.org/training/training-list/training-details?CourseCode=262U



http://www.aiag.org/training/training-list/training-details?CourseCode=262EO


http://www.aiag.org/training/training-list/training-details?CourseCode=IQA17025

http://www.aiag.org/training/training-list/training-details?CourseCode=IQA17025

8/17/2019 AIAG 2016 Catlog


, p g p , p , /simulated audit of internal test and calibration laboratories will develop and refine the knowledge and skills you learn in this course.

CEUs: 0.80***


On Demand* $325.00 $425.00

UNDERSTANDING ISO/IEC 17025:2005 In this course, learn the concepts of the ISO/IEC 17025 standard, including lab scope, documentation requirements, concepts of uncertainty,applications to test facilities and calibration facilities, allowances and waivers, and accreditation and compliance.

CEUs: 1.50***


On Demand* 8:00 AM - 5:00 PM $625.00 $825.00

Global Harmonized System of Classicaon

and Labeling of Chemicals (GHS) Guidance

document now available!

“The ABC’s of GHS

Compliant Safety

Data Sheets and Labels”

For more information about this important guidance document,

please call 248-358-3003 or visit http://bit.ly/aiagCR-2

69TRAINING

ISO/TS 16949

EXEMPLAR GLOBAL-CERTIFIED ISO 9001 INTERNAL AUDITOR TRAINING WITH ISO/TS 16949 AUTOMOTIVE EMPHASIS**

ISO/TS 16949

http://www.aiag.org/training/training-list/training-details?CourseCode=UND17025





http://www.aiag.org/training/training-list/training-details?CourseCode=UND17025

http://www.aiag.org/training/training-list/training-details?CourseCode=IATS



8/17/2019 AIAG 2016 Catlog





TRAINING WITH ISO/TS 16949 AUTOMOTIVE EMPHASISInternal auditors in the automotive industry are essential to providing the objective feedback required for maintaining and continuously improving

upon an effective ISO/TS 16949 quality management system. Recommended for new or current internal auditors who need to perform internal qualityaudits, this course will provide you with the background to audit an internal quality management system to the requirements of ISO/TS 16949.In addition, it is designed specifically for automotive suppliers and meets ISO/TS 16949 and customer requirements for FCA, Ford Motor Co., andGeneral Motors Co. CEUs: 2.40***


February 1-3, 2016 8:00 AM - 6:00 PM $995.00 $1,195.00

March 21-23, 2016 8:00 AM - 6:00 PM $995.00 $1,195.00April 18-20, 2016 8:00 AM - 6:00 PM $995.00 $1,195.00

June 27-29, 2016 8:00 AM - 6:00 PM $995.00 $1,195.00

July 26-28, 2016 8:00 AM - 6:00 PM $995.00 $1,195.00

August 29-31, 2016 8:00 AM - 6:00 PM $995.00 $1,195.00

October 10-12, 2016 8:00 AM - 6:00 PM $995.00 $1,195.00

November 7-9, 2016 8:00 AM - 6:00 PM $995.00 $1,195.00



Online Registration

On-site Available


70 TRAINING

EXEMPLAR GLOBAL-CERTIFIED ISO 9001 LEAD AUDITORTRAINING WITH AIAG ISO/TS 16949 SUPPLIER AUDITOR CERTIFICATION** This exclusive AIAG course - the highest level of auditor training available to automotive suppliers - meets ISO/TS 16949 requirements and

ISO/TS 16949



http://www.aiag.org/training/training-list/training-details?CourseCode=LATS



8/17/2019 AIAG 2016 Catlog


This exclusive AIAG course the highest level of auditor training available to automotive suppliers meets ISO/TS 16949 requirements andcustomer requirements of FCA, Ford Motor Co., and General Motors Co. It is the only ISO/TS 16949 training that combines the AIAG Supplier Auditor

Certification with the Exemplar Global-Certified ISO 9001 Lead Auditor Training. CEUs: 3.80***


January 18-22, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00

February 15-19, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00

March 7-11, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00

May 2-6, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00June 6-10, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00

July 25-29, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00

August 22-26, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00

September 26-30, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00

October 17-21, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00

November 14-18, 2016 8:00 AM - 6:00 PM $1,895.00 $2,095.00

ISO/TS 16949 EXECUTIVE UNDERSTANDING This course is designed to provide a basic understanding of ISO/TS 16949. A unique and innovative approach to classroom learning makes the courseengaging and enjoyable, as well as effective for anyone seeking to understand ISO/TS 16949, whether you are familiar with quality managementsystems or not.

CEUs: 0.80***


On Demand* 8:00 AM - 5:00 PM $325.00 $425.00

71TRAINING

ISO/TS 16949 INTERNAL QUALITY AUDITING This course is intended for those auditors who have a solid understanding of the ISO/TS 16949 Technical Specification and need a thorough refresheron how to perform an internal quality audit to ISO/TS 16949. Through individual participation and group activities, you will acquire the necessary

ISO/TS 16949

http://www.aiag.org/training/training-list/training-details?CourseCode=TSEU

http://www.aiag.org/training/training-list/training-details?CourseCode=TSEU

http://www.aiag.org/training/training-list/training-details?CourseCode=TSIQA

http://www.aiag.org/training/training-list/training-details?CourseCode=TSIQA

8/17/2019 AIAG 2016 Catlog





skills to conduct successful internal quality system audits for ISO/TS 16949. A simulated audit, based on documentation from an actual organization,

is included to help you develop and refine your newly acquired knowledge and skills. CEUs: 1.50***


February 10-11, 2016 8:00 AM to 5:00 PM $625.00 $825.00

May 18-19, 2016 8:00 AM to 5:00 PM $625.00 $825.00

August 10-11, 2016 8:00 AM to 5:00 PM $625.00 $825.00

November 3-4, 2016 8:00 AM to 5:00 PM $625.00 $825.00

ISO/TS 16949 SUPPLIER AUDITOR CERTIFICATION Develop high quality internal audits for better performance on registration and surveillance audits. In just four days with a low student-to-instructorratio, learn to improve your internal audits and the results of your surveillance audits with the “supplier version” of the official ISO/TS 16949:2009third-party auditor certification course. Instruction focuses on the requirements of ISO/TS 16949:2009, its linkages to North American automotivequality core tools and customer requirements, and the automotive process approach auditing practices. Coursework is designed to meet ISO/TS16949:2009 requirements and customer requirements for FCA, Ford Motor Co. and General Motors Co. CEUs: 3.00***


March 1-4, 2016 8:00 AM - 5:00 PM $1,695.00 $1,995.00

September 19-22, 2016 8:00 AM - 5:00 PM $1,695.00 $1,995.00



Online Registration

On-site Available


72 TRAINING

ISO/TS 16949 SUPPLIER AUDITOR RECERTIFICATION Become re-certified as an ISO/TS 16949 supplier auditor and gain a renewed understanding of the ISO/TS 16949 certification and audit process.Prerequisite: Current AIAG ISO/TS 16949 supplier auditor certification.

ISO/TS 16949

http://www.aiag.org/training/training-list/training-details?CourseCode=TSSACT

http://www.aiag.org/training/training-list/training-details?CourseCode=TSSACT

http://www.aiag.org/training/training-list/training-details?CourseCode=SACTRE

http://www.aiag.org/training/training-list/training-details?CourseCode=SACTRE

8/17/2019 AIAG 2016 Catlog


CEUs: 1.80***


April 25-27, 2016 8:00 AM - 5:00 PM $1,195.00 $1,395.00

October 24-26, 2016 8:00 AM - 5:00 PM $1,195.00 $1,395.00

UNDERSTANDING ISO/TS 16949 The requirements of ISO/TS 16949 promote a process approach for the design and development, production, installation and service of automotiveproducts, which can result in increased quality, a reduction in variation and increased efficiency. Develop a complete appreciation for ISO/TS16949, including the process approach to quality management, and an understanding of how it is necessary and valuable to your overall businessmanagement system.

Learn the intent and requirements of the Technical Specification and its linkages to North American automotive quality Core Tools (APQP, FMEA, MSA,PPAP and SPC) and customer requirements of FCA, Ford Motor Co. and General Motors Co.

CEUs: 1.50***


February 8-9, 2016 8:00 AM to 5:00 PM $625.00 $825.00

May 16-17, 2016 8:00 AM to 5:00 PM $625.00 $825.00

August 8-9, 2016 8:00 AM to 5:00 PM $625.00 $825.00

November 1-2, 2016 8:00 AM to 5:00 PM $625.00 $825.00

The Premier Standard for Continuing Education & Training

The International Association for Continuing Education and Training is a non-profit association dedicated to quality continuing education and training programs.

AIAG has been approved as an Authorized Provider by the International Association for Continuing Education and Training (IACET), 1760 Old Meadow Road,Suite 500, McLean, VA 22102; (703) 506-3275.

In obtaining this approval, AIAG has demonstrated that it complies with the ANSI/IACET 1-2007 Standard which is recognized internationally as a standard ofgood practice.

As a result of their Authorized Provider membership status, AIAG is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET 1-2007Standard.

Authorized IACET Provider

73TRAINING

MATERIALS MANAGEMENT

GLOBAL MMOG/LE IMPLEMENTATION TRAINING - LEVEL 1 In light of global economic challenges and vehicle fluctuation and demand, it is more important than ever to focus attention on supply chain

t i i l di t i t it t i t ti l i b ti bilit ll ti d

MATERIALS MANAGEMENT

http://www.aiag.org/training/training-list/training-details?CourseCode=UNDTS

http://www.aiag.org/training/training-list/training-details?CourseCode=UNDTS

http://www.aiag.org/training/training-list/training-details?CourseCode=MMOG

http://www.aiag.org/training/training-list/training-details?CourseCode=MMOG

8/17/2019 AIAG 2016 Catlog





management issues including customer requirements, capacity constraints, contingency planning, sub-tier capability, resource allocation, and

employee skills. This hands-on, instructor-led course is designed to improve materials management efficiency and effectiveness in your supply chainleveraging the Global Materials Management Operations Guideline Logistics Evaluation (MMOG/LE). MMOG/LE is the global standard for supplychain management processes that reduces costs from errors, waste, and workload for suppliers and customers. You will learn best practices tocomplete the MMOG/LE assessment tool, identify gaps and prepare action plans.

Registration includes an electronic copy of the Global Materials Management Operations Guideline/Logistics Evaluation (MMOG/LE Version 4).

The classroom setting is designed to interact with the instructor, complete group exercises and allow you to network with other users and OEMrepresentatives.

CEUs: 0.80***


February 3, 2016 8:00 AM to 5:00 PM $350.00 $495.00

March 2, 2016 8:00 AM to 5:00 PM $350.00 $495.00

April 6, 2016 8:00 AM to 5:00 PM $350.00 $495.00

May 11, 2016 8:00 AM to 5:00 PM $350.00 $495.00

June 1, 2016 8:00 AM to 5:00 PM $350.00 $495.00July 13, 2016 8:00 AM to 5:00 PM $350.00 $495.00


October 5, 2016 8:00 AM to 5:00 PM $350.00 $495.00

November 2, 2016 8:00 AM to 5:00 PM $350.00 $495.00



Online Registration

On-site Available


74 TRAINING

QUALITY

CQI-14 AUTOMOTIVE WARRANTY ASSESSMENT TRAINING The CQI-14 Automotive Warranty Assessment Training provides a best-practice approach for managing warranty processes with the consumer inmind The goal of the training is to develop skilled practitioners who are well versed in the Assessment tool provided in the

QUALITY

http://www.aiag.org/training/training-list/training-details?CourseCode=CQI14


8/17/2019 AIAG 2016 Catlog


mind. The goal of the training is to develop skilled practitioners who are well versed in the Assessment tool provided in the

CQI-14 manual and who is able to provide an organization with a warranty process that utilizes best practices.

CEUs: 0.80***


February 23, 2016 8:00 AM - 5:00 PM $325.00 $425.00

April 26, 2016 8:00 AM - 5:00 PM $325.00 $425.00

June 16, 2016 8:00 AM - 5:00 PM $325.00 $425.00

August 16, 20168:00 AM - 5:00 PM

$325.00 $425.00October 11,2016 8:00 AM - 5:00 PM $325.00 $425.00

CQI-14 PRE-ASSESSMENT The CQI-14 Automotive Warranty Management Pre-Assessment is optional. It will provide a preliminary gap analysis to determine current state of anorganization’s warranty management process and for the basis for initial action plans.Upon completion, you will receive a results letter via email.

Date(s) Time(s) Member Price Non-Member PriceOn-line course (anytime) On-line course (anytime) FREE FREE

CQI-19 SUB-TIER SUPPLIER MANAGEMENT PROCESS GUIDELINE ELEARNINGIn this online training, a strong emphasis is placed on explaining the goal of how “Using a common supplier management process across the industrywill result in more effective supplier evaluation, selection, and development and make current resources more effective,” the benefits of such anapproach, and a description of “real world” problems caused by failures in the supplier development process.


On-line course (anytime) On-line course (anytime) FREE FREE

75TRAINING GLOBAL CERTIFIED TRAINING PARTNERS

http://www.aiag.org/training/training-list/training-details?CourseCode=C14PA12

http://www.aiag.org/training/training-list/training-details?CourseCode=ESSMP



http://www.aiag.org/training/training-list/training-details?CourseCode=C14PA12

8/17/2019 AIAG 2016 Catlog


Where you are, we are!

In 2016, AIAG introduces their line-up of new Global Certified Training Providers in Quality Management:Automotive Quality Core Tools and Continuous Quality Improvement (CQI) Special Process Standards andBest Practices.

AIAG training available in the following countries:

The same quality AIAG training you receive here in the USA is provided consistently“IN Country / IN Language” by AIAG globally!

For additional information on all training and documents, please contact us at

[email protected] or visit www.aiag.org

Asia Pacific: • China • South Korea • Japan

• Taiwan • India • Thailand

North America (NAFTA) • USA • Canada • Mexico

South America

• Brasil

Africa • South Africa

Eastern Europe

• Russia • Czech Republic

Western Europe • Italy • France • Germany

76 TRAINING

CQI-19 SUB-TIER SUPPLIER MANAGEMENT PROCESS GUIDELINE SELF-ASSESSMENTUpon completion of this self-assessment, you will receive feedback on your current understanding of:

QUALITY

http://www.aiag.org/training/training-list/training-details?CourseCode=SSMSA



8/17/2019 AIAG 2016 Catlog


• General knowledge of CQI-19• ISO/TS 16949 requirements pertaining to the organization’s suppliers• Knowledge of APQP and PPAP supplier requirements• General knowledge of AIAG Core Tools and other CQIs from the supplier development perspective• Additional feedback on your results, to include recommendations for additional training and other relevant references/resources will also be

provided.



CQI-19 SUB-TIER SUPPLIER MANAGEMENT PROCESS PROGRAM CQI-19: Sub-tier Supplier Management Process Program is a blended course consisting of three components:

1. CQI-19 Online Self-Assessment (1/2-Hour) - a prerequisite, pre-test to evaluate knowledge competency of CQI-19, ISO/TS 16949 and Core Tools.2. CQI-19 eLearning (1-Hour) - a prerequisite for the face-to-face training.3. CQI-19 Classroom Training (1-Day) - a bridge to the online training, and application of CQI-19 in the workplace based on case study activities.

•Final Examination (1-Hour) - an on-line examination to evaluate and assess knowledge and application of CQI-19 delivered during theclassroom training. Participants are expected to have a basic understanding of core tools and will be part of the exam.

Learning is maximized through participation and interactivity. This program focuses on activities, case studies, and applications. CEUs: 0.80***


February 17, 2016 8:00 AM to 5:00 PM $325.00 $425.00

June 23, 2016 8:00 AM to 5:00 PM $325.00 $425.00October 27 , 2016 8:00 AM to 5:00 PM $325.00 $425.00



Online Registration

On-site Available


77TRAINING

EFFECTIVE PROBLEM SOLVING FOR PRACTITIONERS This workshop is based on the revised AIAG CQI-20: Effective Problem Solving - Practitioner Guide. This course provides guidance in solving morecomplex problems where the use of a cross-functional team is needed.

QUALITY

http://www.aiag.org/training/training-list/training-details?CourseCode=SSMP

http://www.aiag.org/training/training-list/training-details?CourseCode=SSMP

http://www.aiag.org/training/training-list/training-details?CourseCode=EPSG

http://www.aiag.org/training/training-list/training-details?CourseCode=EPSG

8/17/2019 AIAG 2016 Catlog





CEUs: 0.80***


February 26, 2016 8:00 AM to 5:00 PM $325.00 $425.00

June 20, 2016 8:00 AM to 5:00 PM $325.00 $425.00


IMPLEMENTING LAYERED PROCESS AUDITS (LPA) Learn how to implement Layered Process Audits (LPA) in the Automotive or any other industry to improve product quality and customer satisfaction.LPAs can be applied to verify any defined process within an organization. This course will help you use the AIAG CQI-8 Guideline to confidentlyimplement LPA at your facility. Participants will become comfortable with an efficient LPA implementation model and the sample formats and reportsprovided within CQI-8. Activities in the workshop will help participants create effective LPA questions, and discussion will include differencesbetween the major OEM Customer requirements for LPAs. A hard copy of the CQI-8 Layered Process Audits Guideline will be included in the coursematerial. CEUs: 0.80***


March 7, 2016 8:00 AM to 5:00 PM $325.00 $425.00

August 8, 2016 8:00 AM to 5:00 PM $325.00 $425.00

The Premier Standard for Continuing Education & Training

The International Association for Continuing Education and Training is a non-profit association dedicated to quality continuing education and training programs.

AIAG has been approved as an Authorized Provider by the International Association for Continuing Education and Training (IACET), 1760 Old Meadow Road,Suite 500, McLean, VA 22102; (703) 506-3275.

In obtaining this approval, AIAG has demonstrated that it complies with the ANSI/IACET 1-2007 Standard which is recognized internationally as a standard ofgood practice.

As a result of their Authorized Provider membership status, AIAG is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET 1-2007Standard.

Authorized IACET Provider

78 TRAINING

INTRODUCTION TO DESIGN REVIEW BASED ON FAILURE MODES (DRBFM)This course is intended to provide an overview of DRBFM. The DRBFM methodology continues to be used in many industries by many companiesto significantly improve change controls (both internally and at suppliers). This course will discuss the requirements and common techniques that

QUALITY

http://www.aiag.org/training/training-list/training-details?CourseCode=LPATT

http://www.aiag.org/training/training-list/training-details?CourseCode=LPATT

http://www.aiag.org/training/training-list/training-details?CourseCode=DRBFM



8/17/2019 AIAG 2016 Catlog


to significantly improve change controls (both internally and at suppliers). This course will discuss the requirements and common techniques that

will enable a company to gain the maximum benefits of the DRBFM process. Since proficiency is only gained by doing, participants are encouragedto bring a DRBFM example to work on during the class. The course will follow the four steps of the DRBFM process as defined in the AIAG CQI-24Design Review Based on Failure Mode Guideline.

CEUs: 1.50***


April 7-8, 2016 8:00 AM to 5:00 PM $625.00 $825.00

September 19-20, 2016 8:00 AM to 5:00 PM $625.00 $825.00

LEADERSHIP’S ROLE IN A SUCCESSFUL LAYERED PROCESS AUDIT (LPA)The CQI-8 Layered Process Audits Guideline stresses the importance of leadership involvement in an organization’s Layered Process Audit (LPA)activities - and for a good reason: Without specific leadership behaviors and actions, LPAs are usually a waste of time and frustrating to the peopleinvolved. However, when Leadership sees the value of LPAs and participates appropriately, the organization can achieve a culture of accountability,process control and continuous improvement. What’s the payoff? A reduction of scrap, rework, customer complaints, warranty and recalls.“Leadership” goes beyond tacit support by Top-Management. Learn how you can leverage your human assets to take your organization to the next

level of performance. CEUs: 0.40***


March 8, 2016 8:00 AM to 12:00 PM $175.00 $225.00

August 9, 2016 8:00 AM to 12:00 PM $175.00 $225.00

POKA YOKE (MISTAKE PROOFING) FOR ZERO DEFECTS The purpose of this workshop is to provide the participant with a basic overview of the Poka Yoke System for developing a zero defects strategy inindustrial applications. The workshop will provide an introduction to the system and its toolbox to assist you in the development and implementationof a zero defects based culture. Included in the workshop is a series of defined activities and applications for its use as a process.

CEUs: 0.80***


On Demand* 8:00 AM - 5:00 PM $325.00 $425.00

79TRAINING

RELIABILITY & MAINTAINABILITY OVERVIEWThis course will provide an in-depth introduction to basic Reliability principles and a high level introduction to some of the key reliability tools andstrategies implemented within the industry. The course will also familiarize the participants with the AIAG reliability tools which have been developedby the supply chain to enhance and make their reliability domains more efficient.

QUALITY

http://www.aiag.org/training/training-list/training-details?CourseCode=LPAEO


http://www.aiag.org/training/training-list/training-details?CourseCode=PYMP

http://www.aiag.org/training/training-list/training-details?CourseCode=PYMP


8/17/2019 AIAG 2016 Catlog






On Demand* 8:00 AM - 5:00 PM $325.00 $425.00

SUPPLIER & PRODUCT RELIABILITY ASSURANCE - PUBLICATION D32 This course will provide a comprehensive look into the AIAG Reliability Tool Kit developed by a collaborative effort between the OEMs and Suppliers.Primary focus will be on the RMA- Reliability Maturity Assessment, Reliability Assurance Planning and AIAG tools which can be utilized to establish aworld class reliability program. Hands on exercises, utilizing the AIAG tools, will accompany class room lecture.


On Demand* 8:00 AM - 5:00 PM $325.00 $425.00

TAKING EFFECTIVE CORRECTIVE ACTION: USING THE 8-D APPROACHThis training course presents the 8-D model as an efficient and effective methodology for determining, planning, verifying, and documenting corrective

actions. You will be introduced to planning for improvement using easily understood and implemented tools that will result in positive, innovative, andeffective actions.

The tools include the questioning technique that establishes a method by which various teams with diverse backgrounds can determine whichplanning steps are necessary and will result in positive actions. The 8-D approach assists teams in ensuring that all necessary steps are addressedand that an efficient and consistent communication of the results of the team activity is made. CEUs: 1.50***


March 14-15, 2016 8:00 AM to 5:00 PM $625.00 $825.00

July 14-15, 2016 8:00 AM to 5:00 PM $625.00 $825.00

November 10-11, 2016 8:00 AM to 5:00 PM $625.00 $825.00

80 TRAINING

UNDERSTANDING THE CASTING SPECIAL PROCESS SYSTEM ASSESSMENTSIn this class, understand and learn how to use the Casting Special Process System Assessment as a foundation to assure control of these specialprocesses and deliver quality parts and materials.

QUALITY

http://www.aiag.org/training/training-list/training-details?CourseCode=SPRA

http://www.aiag.org/training/training-list/training-details?CourseCode=U8DA



http://www.aiag.org/training/training-list/training-details?CourseCode=SPRA




8/17/2019 AIAG 2016 Catlog


CEUs: 0.80***


January 22, 2016 8:00 AM to 5:00 PM $325.00 $425.00

March 11, 2016 8:00 AM to 5:00 PM $325.00 $425.00

June 22, 2016 8:00 AM to 5:00 PM $325.00 $425.00

October 19, 2016 8:00 AM to 5:00 PM $325.00 $425.00

UNDERSTANDING THE HEAT TREAT, SOLDERING ANDWELDING SPECIAL PROCESS SYSTEM ASSESSMENTS Find out how to effectively use the Heat Treat, Soldering and/or Welding guidelines to evaluate the control and management of your processesand deliver quality parts and materials. If you are involved in the implementation of, maintenance of, and/or compliance of a heat treat, solderingor welding system assessment, this course will give you the tools necessary to understand and learn how to use the system assessments as afoundation to assure control of your processes. CEUs: 0.80***


April 13, 2016 8:00 AM to 5:00 PM $325.00 $425.00

August 26, 2016 8:00 AM to 5:00 PM $325.00 $425.00

UNDERSTANDING THE MOLDING SPECIAL PROCESS SYSTEM ASSESSMENTIn this class, understand and learn how to use the Molding Special Process System Assessment as a foundation to assure control of these specialprocesses and deliver quality parts and materials. CEUs: 0.80***


January 21, 2016 8:00 AM to 5:00 PM $325.00 $425.00

March 10, 2016 8:00 AM to 5:00 PM $325.00 $425.00

June 21, 2016 8:00 AM to 5:00 PM $325.00 $425.00

October 18, 2016 8:00 AM to 5:00 PM $325.00 $425.00

81TRAINING

UNDERSTANDING THE PLATING AND COATING SPECIAL PROCESS SYSTEM ASSESSMENTSIf you are interested in the Plating System Assessment and Coating System Assessment, this overview course covers the tools that are the foundationof the special process assessments. Learn how to use the tool as a foundation to ensure control of the special processes, as well as to deliver quality

QUALITY

http://www.aiag.org/training/training-list/training-details?CourseCode=CQHSW






http://www.aiag.org/training/training-list/training-details?CourseCode=CQPC



8/17/2019 AIAG 2016 Catlog





parts and materials. This overview course covers the coating and plating special process system assessments. CEUs: 0.80***


May 13, 2016 8:00 AM to 5:00 PM $325.00 $425.00

October 17, 2016 8:00 AM to 5:00 PM $325.00 $425.00

VDA 6.3 - EXAMINATION FOR CERTIFIED PROCESS AUDITOR (MODULE C) The one-day VDA 6.3 process auditor examination consists of two parts: a written exam and an oral exam. Applicant must submit a completedApplication Form for Admission to Examination for Certified Process Auditor VDA 6.3 (VDA Form 1408) and submit all the appropriate evidence anddocumentation. Once the application has been received, it will be reviewed for acceptance into the examination. After passing the complete exam(both parts), you will receive a VDA certificate with your registered number, an auditor card, and entry into the VDA QMC database.


On Demand* 8:00 AM to 5:00 PM $750.00 $825.00

VDA 6.3 - GENERAL BASICS FOR NEW PROCESS AUDITORS (MODULE A) Based on the process model approach used in ISO 9001:2008, this course teaches new auditors basic audit techniques for process auditing accordingto VDA 6.3. This course includes general requirements, methods, principles and risk analysis which enable you to understand correlations andapply the necessary sequences correctly. After successful completion of this class (Module A) and Modules BII and C, you will receive an auditorqualification card from VDA (please refer to Module E).


On Demand* 8:00 AM to 5:00 PM $1,350.00 $1,500.00

82 TRAINING

VDA 6.3 - PROCESS AUDIT - PRODUCT LIFE CYCLE (MODULE BII) Based on the ISO 9001:2008 process approach used in ISO/TS 16949 and the respective customer requirements, this course will enable you to applyprocess audits throughout the supply chain to identify risks and determine capability. After successful completion of this class (Module BII) and theexam (Module C), you will receive an auditor qualification card from VDA. New auditors will also need to complete Module A as a prerequisite.

QUALITY

http://www.aiag.org/training/training-list/training-details?CourseCode=VDAMODC

http://www.aiag.org/training/training-list/training-details?CourseCode=VDAMODA

http://www.aiag.org/training/training-list/training-details?CourseCode=VDAMODA

http://www.aiag.org/training/training-list/training-details?CourseCode=VDAMODC

http://www.aiag.org/training/training-list/training-details?CourseCode=VDAMODB

http://www.aiag.org/training/training-list/training-details?CourseCode=VDAMODB

8/17/2019 AIAG 2016 Catlog



On Demand* 8:00 AM to 5:00 PM $1,900.00 $2,125.00

VDA 6.3 - QUALIFICATION AS PROCESS AUDITOR IN PRODUCT LIFE CYCLE WITH CERTIFIED EXAMINATION (MODULE E) This course is designed for people who want to achieve qualification as a certified VDA 6.3 process auditor within the shortest time possible. Thiscourse and examination includes all of the below training modules.

VDA 6.3 - General Basics for Process Auditors (Module A)VDA 6.3 - Process Audit - Product Life Cycle (Module BII)VDA 6.3 - Examination for Certified Process Auditors (Module C)

After passing the Modules above you will receive a VDA certificate with your registered number, an auditor card, and entry into the VDA QMCdatabase.


January 25-29, 2016 8:00 AM to 5:00 PM $2,400.00 $2,900.00

March 14-18, 2016 8:00 AM to 5:00 PM $2,400.00 $2,900.00

May 16-20, 2016 8:00 AM to 5:00 PM $2,400.00 $2,900.00

July 18-22, 2016 8:00 AM to 5:00 PM $2,400.00 $2,900.00

September 12-16, 2016 8:00 AM to 5:00 PM $2,400.00 $2,900.00

November 7-11, 2016 8:00 AM to 5:00 PM $2,400.00 $2,900.00



Online Registration

On-site Available


83TRAINING

QUALITY CORE TOOLS

ADVANCED PRODUCT QUALITY PLANNING & CONTROL PLAN (APQP) Avoid confusion or misinterpretation of automotive requirements with a clear understanding of advanced product quality planning (APQP) and how itrelates to ISO/TS 16949. Run step-by-step through APQP and learn about the FCA, Ford Motor Co., and General Motors Co. common requirements and

QUALITY CORE TOOLS

http://www.aiag.org/training/training-list/training-details?CourseCode=VDAMODE






8/17/2019 AIAG 2016 Catlog





what you need to do to achieve compliance with the guidelines for product quality planning and the preparation of control plans. This class providesan overview of the tools, procedures and reporting requirements specified in the Advanced Product Quality Planning and Control Plan referencemanual. CEUs: 0.80***


February 22, 2016 8:00 AM to 5:00 PM $325.00 $425.00

May 9, 2016 8:00 AM to 5:00 PM $325.00 $425.00

August 22, 2016 8:00 AM to 5:00 PM $325.00 $425.00November 14, 2016 8:00 AM to 5:00 PM $325.00 $425.00

APPLIED SPC AND MSA FOR PRACTITIONERS Improve your understanding of the integration of statistical process control (SPC) and measurement systems analysis (MSA) into ISO/TS 16949 anddiscover how to develop a higher quality process control system by selecting and applying the appropriate statistical tools.The goal is to illustratehow these techniques can be incorporated into a system to provide for not only process improvement, but also product improvement.

CEUs: 2.30***


April 4-6, 2016 8:00 AM to 5:00 PM $900.00 $1,100.00

September 12-14, 2016 8:00 AM to 5:00 PM $900.00 $1,100.00

84 TRAINING

APQP/PPAP CERTIFICATION EXAM Certification by AIAG in APQP/PPAP verifies an individual’s proficiency in product quality planning and control plan guidelines, and PPAP submittalrequirements as defined in the APQP and PPAP reference manuals. The individual is able to apply and communicate them, and as a result, can supportthe development of a product that will increase customer satisfaction.

QUALITY CORE TOOLS

http://www.aiag.org/training/training-list/training-details?CourseCode=SPCMSA

http://www.aiag.org/training/training-list/training-details?CourseCode=SPCMSA

http://www.aiag.org/training/training-list/training-details?CourseCode=APQPEXAM

http://www.aiag.org/training/training-list/training-details?CourseCode=APQPEXAM

8/17/2019 AIAG 2016 Catlog



March 8, 2016 8:00 AM - 12:00 PM $295.00 $395.00

June 15, 2016 8:00 AM - 12:00 PM $295.00 $395.00

October 12, 2016 8:00 AM - 12:00 PM $295.00 $395.00

APQP HOW-TO WORKSHOP

Gain the skills to effectively implement an Advanced Product Quality Planning & Control Plan (APQP). This activity-based course will teach you aboutAPQP tools and the linkage between process flow charts, Failure Mode and Effects Analysis (FMEA), control plans and Production Part ApprovalProcess (PPAP). CEUs: 1.50***


April 14-15, 2016 8:00 AM to 5:00 PM $625.00 $825.00

September 20-21, 2016 8:00 AM to 5:00 PM $625.00 $825.00

CORE TOOLS OVERVIEW ELEARNING This course will provide a brief summary of the AIAG Core Tools APQP, PPAP, FMEA, SPC, and MSA. The primary focus will be to create awarenessof the AIAG Core Tools, with an overview of how they can help your organization in its journey through the never ending quest for continualimprovement.





Online Registration

On-site Available


85TRAINING

CORE TOOLS SELF-ASSESSMENT ISO/TS 16949 requires that “personnel performing work affecting conformity to product requirements shall be competent on the basis of appropriateeducation, training, skills and experience.” Organizations use many sources for quality training today. Is your team ready? How do you know?

QUALITY CORE TOOLS

http://www.aiag.org/training/training-list/training-details?CourseCode=APHT

http://www.aiag.org/training/training-list/training-details?CourseCode=ELCTSA


http://www.aiag.org/training/training-list/training-details?CourseCode=APHT



8/17/2019 AIAG 2016 Catlog





AIAG has developed a free online survey to test basic competency in the automotive quality Core Tools, e.g. APQP/PPAP, FMEA, MSA and SPC, whichyou can use to baseline your organization’s and/or your suppliers’ competency. The questions reflect information that everyone in automotive qualitytoday should know and was developed with the required knowledge for third-party ISO/TS 16949 auditors as an input. Results can be used 1) to verifythe effectiveness of your quality Core Tools training, 2) for supplier development, e.g. Tier 2, and 3) to develop individual or group improvement plans.



FAILURE MODE AND EFFECTS ANALYSIS (FMEA) OVERVIEW Develop a real-world, functional understanding of Failure Mode and Effects Analysis. ISO/TS 16949 internal auditors or second-party auditors, anyoneinvolved in developing design and/or process FMEAs or in the implementation of ISO/TS 16949 will benefit from learning about the common set ofrequirements that should be used to implement FMEA techniques into design and manufacturing processes.

CEUs: 0.40***


February 23, 2016 8:00 AM to 12:00 PM $175.00 $225.00

May 10, 2016 8:00 AM to 12:00 PM $175.00 $225.00August 23, 2016 8:00 AM to 12:00 PM $175.00 $225.00

November 15, 2016 8:00 AM to 12:00 PM $175.00 $225.00

FMEA CERTIFICATION EXAM Certification by AIAG in FMEA confirms an individual’s proficiency in failure mode and effects analysis techniques as defined in the FMEA referencemanual. The individual is able to apply and communicate them, and as a result, can successfully support the identification and management of risks.


March 8, 2016 1:00 PM - 5:00 PM $295.00 $395.00

June 15, 2016 1:00 PM - 5:00 PM $295.00 $395.00

October 12, 2016 1:00 PM - 5:00 PM $295.00 $395.00

86 TRAINING

IMPLEMENTING APQP, CONTROL PLAN AND PPAP Learn the skills needed to implement the APQP process, develop control plans and complete the production part approval process smoothly, efficientlyand effectively. Realism is enhanced as the participant develops flow charts, process instructions and control plans for a case study product andcarries them through the PPAP submission process.

QUALITY CORE TOOLS

http://www.aiag.org/training/training-list/training-details?CourseCode=FMEA

http://www.aiag.org/training/training-list/training-details?CourseCode=FMEAEXAM

http://www.aiag.org/training/training-list/training-details?CourseCode=FMEAEXAM

http://www.aiag.org/training/training-list/training-details?CourseCode=FMEA

http://www.aiag.org/training/training-list/training-details?CourseCode=ELAP

http://www.aiag.org/training/training-list/training-details?CourseCode=ELAP

8/17/2019 AIAG 2016 Catlog


CEUs: 0.60***



IMPLEMENTING FAILURE MODE AND EFFECTS ANALYSIS (FMEA) This course is designed to establish the use of FMEAs and to help you learn the skills needed to practice risk reduction and defect prevention. Throughthis online course you will foster an understanding of the specific components of Design and Process FMEAs; utilize the FMEA to avoid Murphy’s Law;

relate the FMEA to APQP; and gain the needed skills to practice risk reduction and defect prevention.

CEUs: 0.40***



IMPLEMENTING STATISTICAL PROCESS CONTROL (SPC) Examine methods for implementing and applying the principles of statistical process control to manufacturing processes. This course will show the

linkage of SPC and the Measurement Studies with ISO/TS 16949 requirements and FMEA and PPAP and offer methods for the use of SPC tools andapplication of software for the calculation of Control Limits and Measurement Studies.

CEUs: 0.40***



MEASUREMENT SYSTEMS ANALYSIS (MSA) WITH APPLICATIONS The purpose of this course is to provide the participant with the tools to perform various MSA applications within their organizations. The course ispresented in several, self-contained modules to effectively drive the principles of MSA while enabling the participant to immediately tie the principlesto their applications. The course allows for the organization to use their data, through application exercises to incorporate the concepts into actualoutcomes. The course will present the methods necessary to analyze outcome data and to make decisions and recommendations based on the data.

CEUs: 0.80***



87TRAINING

MSA CERTIFICATION EXAM Certification by AIAG in MSA verifies an individual’s proficiency in measurement systems analysis techniques as defined in the MSA referencemanual. The individual is able to analyze measurement systems, can explain them, and as a result, can successfully support the selection andmanagement of measurement systems.

QUALITY CORE TOOLS

http://www.aiag.org/training/training-list/training-details?CourseCode=ELFM

http://www.aiag.org/training/training-list/training-details?CourseCode=ELSP

http://www.aiag.org/training/training-list/training-details?CourseCode=ELMS

http://www.aiag.org/training/training-list/training-details?CourseCode=ELMS

http://www.aiag.org/training/training-list/training-details?CourseCode=ELSP

http://www.aiag.org/training/training-list/training-details?CourseCode=ELFM

http://www.aiag.org/training/training-list/training-details?CourseCode=MSAEXAM

http://www.aiag.org/training/training-list/training-details?CourseCode=MSAEXAM

8/17/2019 AIAG 2016 Catlog






March 9, 2016 8:00 AM - 12:00 PM $295.00 $395.00

June 16, 2016 8:00 AM - 12:00 PM $295.00 $395.00

October 13, 2016 8:00 AM - 12:00 PM $295.00 $395.00

PFMEA IN CONTEXT

The development and usage of the quality core tools including process flow diagrams, process FMEAs and control plans are nothing new to theautomotive supply base. Unfortunately, in many cases these documents are not used to their full potential reducing the benefit for both suppliers andtheir customers. As the advanced next step in process improvement, this workshop was designed to reemphasize the benefits, importance, and properdevelopment of these documents for the benefit of supplier organizations and their customers.

CEUs: 1.50***


February 24-25, 2016 8:00 AM to 5:00 PM $625.00 $825.00

May 11-12, 2016 8:00 AM to 5:00 PM $625.00 $825.00August 24-25, 2016 8:00 AM to 5:00 PM $625.00 $825.00

November 16-17, 2016 8:00 AM to 5:00 PM $625.00 $825.00

Credit-Based Training Programs

AIAG’s credit-based training program provides an added value for your training

investment. Through on-site or open enrollment courses, you can earn college credit

for ISO/TS 16949:2009, Quality Core Tools, and ISO/IEC 17025-related courses.

The academic credits can be applied at most colleges and universities toward higher

education degrees. This is the first program of its kind for automotive quality training.

Academic credits are issued by Riverland Community College, accredited by

the Higher Learning Commission. To be eligible for academic credits, you must

successfully complete each course.

Call us at (248) 358-3003 for details!

88 TRAINING

PRODUCTION PART APPROVAL PROCESS (PPAP) OVERVIEW Whether you are familiar with the Production Part Approval Process (PPAP) requirement, need a refresher or are new to PPAP altogether, this overviewcourse is for you.

Become versed on the procedures, reporting requirements and activities specified by the PPAP manual. Instruction covers the fourth edition manual,b i i d ifi i f l d / l i d b i i A i f f i h PPAP l

QUALITY CORE TOOLS

http://www.aiag.org/training/training-list/training-details?CourseCode=FMCT

http://www.aiag.org/training/training-list/training-details?CourseCode=FMCT

http://www.aiag.org/training/training-list/training-details?CourseCode=PPAP

http://www.aiag.org/training/training-list/training-details?CourseCode=PPAP

8/17/2019 AIAG 2016 Catlog


submission and specific requirements for part approval records/sample retention, and part-submission status. A review of forms in the PPAP manualis also included. CEUs: 0.40***


February 23, 2016 1:00 PM - 5:00 PM $175.00 $225.00

May 10, 2016 1:00 PM - 5:00 PM $175.00 $225.00

August 23, 2016 1:00 PM - 5:00 PM $175.00 $225.00November 15, 2016 1:00 PM - 5:00 PM $175.00 $225.00

QUALITY CORE TOOLS - CONNECT THE DOTS ELEARNING This basic level course will provide participants with a better understanding of how the automotive industry Core Tools (e.g. APQP/Control Plan,FMEA, MSA, SPC and PPAP) work together to assure quality. Utilizing a case study approach, the course highlights key issues to address whileutilizing the core tools to successfully develop and launch a new product. The results of this course will provide you with insights to know where yourCore Tools strengths lie and where you may need further training.



SPC CERTIFICATION EXAM Certification by AIAG in SPC confirms an individual’s proficiency in statistical process control techniques as defined in the SPC reference manual.The individual is able to apply and communicate them, and as a result, can successfully support the monitoring and improvement of manufacturingprocesses.


March 9, 2016 1:00 PM - 5:00 PM $295.00 $395.00

June 16, 2016 1:00 PM - 5:00 PM $295.00 $395.00

October 13, 2016 1:00 PM - 5:00 PM $295.00 $395.00

89TRAINING

UNDERSTANDING AND IMPLEMENTING APQP WITH PPAP Learn the skills needed to implement the APQP process, develop control plans and complete the Production Part Approval Process smoothly, efficientlyand effectively within your company. Additionally, acquire the skills necessary to complete all five APQP phases from “voice of the customer” throughfinal output, including control plan methodology and PPAP submission.

CEUs: 1 50***

QUALITY CORE TOOLS

http://www.aiag.org/training/training-list/training-details?CourseCode=QDOT

http://www.aiag.org/training/training-list/training-details?CourseCode=SPCEXAM

http://www.aiag.org/training/training-list/training-details?CourseCode=SPCEXAM

http://www.aiag.org/training/training-list/training-details?CourseCode=QDOT

http://www.aiag.org/training/training-list/training-details?CourseCode=PAPQP

http://www.aiag.org/training/training-list/training-details?CourseCode=PAPQP

8/17/2019 AIAG 2016 Catlog





CEUs: 1.50***


February 4-5, 2016 8:00 AM to 5:00 PM $625.00 $825.00

April 21-22, 2016 8:00 AM to 5:00 PM $625.00 $825.00

June 23-24, 2016 8:00 AM to 5:00 PM $625.00 $825.00

August 18-19, 2016 8:00 AM to 5:00 PM $625.00 $825.00

October 6-7, 2016 8:00 AM to 5:00 PM $625.00 $825.00December 8-9, 2016 8:00 AM to 5:00 PM $625.00 $825.00

UNDERSTANDING AND IMPLEMENTING FMEA Establish the foundation to void Murphy’s Law; things that could go wrong don’t have to when you learn to use FMEAs successfully. This course willteach you the skills to understand and use FMEAs and the concept of risk reduction and defect prevention.

Turn your quality control around when you discover the impact of failure and how you can reduce the risk with FMEAs. Then, take your skills and

knowledge beyond the concepts by learning the specifics of successfully developing and maintaining design and process FMEAs for your company,which includes identifying and reducing risk factors. CEUs: 1.50***


February 2-3, 2016 8:00 AM to 5:00 PM $625.00 $825.00

April 19-20, 2016 8:00 AM to 5:00 PM $625.00 $825.00

June 21-22, 2016 8:00 AM to 5:00 PM $625.00 $825.00

August 16-17, 2016 8:00 AM to 5:00 PM $625.00 $825.00

October 4-5, 2016 8:00 AM to 5:00 PM $625.00 $825.00

December 6-7, 2016 8:00 AM to 5:00 PM $625.00 $825.00

90 TRAINING

UNDERSTANDING AND IMPLEMENTING MSA AND SPC BASICS Establish a foundational knowledge-base to analyze your manufacturing system and enhance its effectiveness. Gain a basic understanding of how toestablish, analyze and implement a statistical process control (SPC) system in a manufacturing environment.

Discover the framework of how to implement and audit SPC fundamentals at your facility and develop a statistical toolbox that can be used for eachof your projects that reflect the stability and capability of your manufacturing system

QUALITY CORE TOOLS /SUPPLY CHAIN MANAGEMENT

http://www.aiag.org/training/training-list/training-details?CourseCode=UFMEA

http://www.aiag.org/training/training-list/training-details?CourseCode=UFMEA

http://www.aiag.org/training/training-list/training-details?CourseCode=PMSSP

http://www.aiag.org/training/training-list/training-details?CourseCode=PMSSP

8/17/2019 AIAG 2016 Catlog


of your projects that reflect the stability and capability of your manufacturing system.

Furthermore, gain a better understanding of how to develop measurement studies for each of your projects that reflect the stability and capability ofyour measurement system. Identify the linkages between the measurement system, using techniques of measurement systems analysis (MSA) andthe appropriate tools for defining its continued capability and effectiveness. In addition, this course includes activities to help you understand andaudit your measurement system.

CEUs: 0.80***

Date(s) Time(s) Member Price Non-Member PriceFebruary 1, 2016 8:00 AM to 5:00 PM $325.00 $425.00

April 18, 2016 8:00 AM to 5:00 PM $325.00 $425.00

June 20, 2016 8:00 AM to 5:00 PM $325.00 $425.00

August 15, 2016 8:00 AM to 5:00 PM $325.00 $425.00

October 3, 2016 8:00 AM to 5:00 PM $325.00 $425.00

December 5, 2016 8:00 AM to 5:00 PM $325.00 $425.00


AUTO INDUSTRY CERTIFICATE IN PURCHASING AND SUPPLY CHAIN MANAGEMENTWayne State University, in cooperation with AIAG, offers the third annual non-degree certificate program designed to provide participants with anin-depth understanding of supply chain topics and issues in the context of the global auto industry.

Vehicle industry supply chain issues are especially focused on purchasing and supplier development, risk management, inbound logistics, after-marketparts management and a rather unique kind of outbound vehicle transportation. Participants will learn about a broad range of vehicle industry orientedsupply chain topics including SCM strategy, SCM finance, forecasting, negotiations, procurement strategy, supplier development, risk management,production operations, quality management processes and Six Sigma, trade management, logistics and transportation management.


February 18 - December 8, 2016 3:30 PM to 7:00 PM $3,895.00 $3,895.00

91TRAINING

B-10 TRADING PARTNERS IMPLEMENTATION GUIDELINE ELEARNING The B-10 describes the template for bar code labels on shipping containers - both unit loads and transport packages - to convey data between tradingpartners in the automotive industry.

The B-10 is the preferred format for shipping labels. Both label- and tag- marking methods for shipping containers and pallets of parts and primarymetals are covered in this guideline under the general term “label ” however the B-10 is not a label but rather a methodology for designing trading


http://www.aiag.org/training/training-list/training-details?CourseCode=SCMC



http://www.aiag.org/training/training-list/training-details?CourseCode=EB1012

http://www.aiag.org/training/training-list/training-details?CourseCode=EB1012

8/17/2019 AIAG 2016 Catlog





metals are covered in this guideline under the general term label, however, the B 10 is not a label, but rather a methodology for designing tradingpartner shipping labels using the ANSI MH10.8.1 U.S. national, cross-industry standard, developed and maintained by the ANSI committee MH10/SBC-8.



B-16 GLOBAL TRANSPORT LABEL STANDARD FOR THE AUTOMOTIVE INDUSTRY ELEARNINGA global automotive industry standard, the B-16 describes the format for a common transport label design to facilitate the movement of goods & theexchange of data among all members of the supply chain.



EXECUTIVE SEMINAR: AUTOMOTIVE INDUSTRY GLOBAL PURCHASING AND SUPPLY CHAIN MANAGEMENTWayne State University, in cooperation with AIAG, is offering a one week, automotive industry focused, Global Purchasing and Supply ChainManagement Seminar designed to provide purchasing and supply chain executives, senior managers, leaders and other functional personnel with theknowledge and skills necessary to significantly improve company supply chain management contributions to cost, financial and overall performance.

This executive seminar has been designed specifically for the auto/vehicle industry with a focus on Purchasing, Logistics and the Integrated SupplyChain. The auto industry is extremely complex, characterized by high capital investments, a globally integrated network of automotive OEM’s and

suppliers and increasing reliance on leading-edge technology and product/process innovation.


May 16 - May 20, 2016 8:00 AM to 5:00 PM $4,895.00 $4,895.00

92 INDEX PUBLICATIONS

http://www.aiag.org/supply-chain-management


http://www.aiag.org/training/training-list/training-details?CourseCode=SCMEX




8/17/2019 AIAG 2016 Catlog


Index

Publications, Guidelines,and Industry Standards2D Direct Parts Marking Guideline 39

2D Symbology White Paper 39 7-Step Problem Solving Process for TH&E Suppliers 10

Act Reporting Information Kit for TREAD Act Reporting 10

Advanced Product Quality Planning and Control Plan (APQP) 11

A Guide to the Project Management Body of Knowledge 11

AIAG Pallet and Lid Whitepaper 2010 39

A Snapshot of Product Development Practices 12

Automotive History of Data Identifiers 40

Automotive History of EDI 40

Automotive Project Management Guide 12

Automotive Warranty Management Guideline 12

Bar Code and Two-Dimensional Symbols for Shipping 40

Bar Code Print Quality Test Specification - Linear Symbols 40

Basics of Export Compliance 41

Best Practices for Mist Control in Machine Tool Enclosures 5

Best Practices in Supply Chain Product Development 13

Business Continuity Planning for the Automotive Supply Chain 41

Business Operating Systems 14

Business Operating Systems for Health Care Organizations 13

Business Process Narrative for TH&E Industry 13

Case Study Using Radio Frequency Identification 41

Code 39 Bar Code Symbology Specification 42

Code 128 Bar Code Symbology Specification 41

Collaborative Computing White Paper 42

Common Visibility Event Definitions of the Finished Vehicle 42

Core Tools Forms 14

Data Matrix Bar Code Symbology Specification 42

Defining Product Data Quality 14

DELFOR (Delivery Forecast Message) 43

Design Review Based on Failure Modes (CQI-24) & SAE J2886 Kit 15

Design Review Based on Failure Modes (DRBFM) 14

EDI Presentation White Paper 43

EDI/XML Project Planner 43

Effective Error-Proofing 15

Effective Problem Solving Leader Guide 16

Effective Problem Solving Practitioner Guide 16

Electronic Proof of Delivery Standard 43

Engineering Change Management (ECM) Recommendation 17 Engineering Change Management - Engineering Change

Request (ECR) Recommendation 16

Environmental Management Systems - Requirements of Use 6

Ergonomic Guidelines for Small Lot Delivery Systems 6

Evaluated Receipts Settlement (ERS) Process 44

Feature-Based Processing Recommended Business Process 17

Financial Managers’ Guide to EDI 44

Finished Vehicle Logistics Quality Handling Manual 44

Finished Vehicle Logistics Transport Damage Reporting 44

93INDEX PUBLICATIONS

IATF Auditor Guide for ISO/TS 16949 20

Implementation Guidelines Version 004010AIAG 48

Industrial Truck Pedestrian Sensing Systems White Paper 7

Information Kit for Importing into Canada 49

Information Kit for Importing into Mexico 49

Joint Automotive Industry Forum (JAIF) Global Radio Frequency

Identification (RFID) 53

Key Performance Indicators for Global Material Management 53

Labeling and Direct Product Marking with Linear Bar Code 53

Layered Process Audit Guideline 21

Leadership Excellence in Health Safety and the Environment 7

8/17/2019 AIAG 2016 Catlog


FMEA for Tooling & Equipment (Machinery FMEA) 17

Freight Containers - Electronic Seals - Part 5: Physical Layer 45

Gas Cylinder Identification Label Standard 45

General Requirements for the Competence of Testing 18

Global Carriers & Logistics Service Providers Evaluation 45

Global DELJIT Message (Just in Time Delivery) 45

Global DESADV Message (Despatch Advice) 46

Global INVOIC Message (Invoice) 46

Global Materials Management Logistics Agreement (GMMLA) 46

Global MMOG/LE - Version 4 47

Global Receiving Advice 47

Global Remittance Advice 47

Global Transport Label Standard for the Automotive Industry 48

Global Vehicle Damage Codes Laminated Cards 48

Glossary of Common Reliability Terms 18

GS1 Application Identifiers and ASC MH10 Data Identifiers 18

Guidance on Statistical Techniques for ISO 9001:2000 18

Guide for Responding to the CM Reporting Templates 7

Guideline for Hazardous Material Storage 6

Guideline for Manually Handled Containers 6

Guidelines for Auditing Management Systems 19

Guidelines for Direct Part Marking (DPM) 48

Guidelines for Realizing Financial and Economic Benefits 19

Guidelines for the Application of ISO 9001 System Life Cycle 19

Guidelines for the Selection of Quality Management System 19

Information Kit for Importing into the United States 49

Information Security Management Systems - Overview 20 Information Technology - Automatic Identification and Data

Capture Techniques - QR Code Bar Code Symbology Specification 50 Information Technology - Radio Frequency Identification Device

Performance Test Methods - Part 3: Test Methods for Tag

Performance 51 Information Technology - Radio Frequency Identification for item

Management - Implementation Guidelines - Part 1: RFID-EnabledLabels and Packaging Supporting ISO/IEC 18000-6C 50 Information Technology - Radio Frequency Identification for Item

Management - Part 2: Parameters for Air Interface

Communications Below 135 kHz 50

Information Technology - Radio Frequency Identification for Item

Management - Part 7: Parameters for Active Air Interface

Communications at 433 MHz 51

Infrastructure for Plant-to-Business (P2B) Interoperability 51

Intercontinental Pallet and Carton Standard 52

ISO/TS 16949 7 Pack 20

ISO/TS 16949:2009 Quality Management Systems 21

ISO/TS 16949 Guidance Manual 20

IV&I Min/Max Replenishment 52

Joint Automotive Industry Forum (JAIF) China B2B 52

Joint Automotive Industry Forum (JAIF) Global Guideline for

Returnable Transport Items 52

Leadership Excellence in Health Safety and the Environment 7

Lift Truck Rotated Operator Compartments: An Ergonomic Review 8

Lift Truck Visibility with Load 8

Long Term Archiving & Retrieval of Digital Product 22

Managing for the Sustained Success of an Organization 8

Manufacturing Assembly Pilot (MAP) Project Final Report 54

Materials Off-Shore Sourcing (MOSS) Project 54

Measurement Systems Analysis 22

Medical Devices - Application of Risk Management 23

Medical Devices - Quality Management Systems 23

Optimum Shipping & Receiving Systems Handbook 54

Packaging Data Form 54

Pandemic Preparedness & Response Plan 8

Parts Identification & Tracking Application Standard 55

Pedestrian & Vehicle Safety Guidelines 9 Plant-to-Business (P2B) Common Data Format for

Potential Failure Mode & Effects Analysis 24

Product Development Metrics 24

Production Part Approval Process 25

Project Management of Complex and Embedded Systems 55

Quality Assurance Guideline for Shipping Labels 55

94 INDEX PUBLICATIONS / TRAINING

Specification for Security Management Systems 58

Standardized Bill of Lading 58

Statistical Process Control 36

Sub-tier Supplier Management Process Guideline 37

Supplier Content Reporting Requirements Workbook 58

8/17/2019 AIAG 2016 Catlog


Quality Management Systems - Fundamentals and Vocabulary 26

Quality Management Systems - Guidelines For Quality Plans 26

Quality Management Systems - Requirements 26

Quality Measurement Data Specification 27

Readiness Checklist for Sub-tier Supplier Management Process 27

Recommended Business Practice for Long Distance Supply Chain 56

Reliability Methods for Improved Product Dependability 27

Requirements for Regulatory Purposes 27

Returnable Containers Management Guideline 56

Returnable Containers Performance Test Guidelines 56

Returnable Transport Items Visibility Best Practices 57

Returnable Transport Item Tracking (RFID Pilot) White Paper 56

Returnable Wheel Packs Transported by Truck 57

Road Vehicles - Functional Safety - Part 1: Vocabulary 28 Road Vehicles - Functional Safety - Part 2: Management of

Functional Safety 28

Road Vehicles - Functional Safety - Part 3: Concept Phase 28

Road Vehicles - Functional Safety - Part 4: Product Development

at the System Level 28

Road Vehicles - Functional Safety - Part 5: Product Developmentat the Hardware Level 29

Road Vehicles - Functional Safety - Part 6: Product Developmentat the Software Level 29

Road Vehicles - Functional Safety - Part 7: Production andOperation 29

Road Vehicles - Functional Safety - Part 8: Supporting Processes 29 Road Vehicles - Functional Safety - Part 9: Automotive SafetyIntegrity Level (ASIL)-Oriented and Safety-Oriented Analyses 30

Road Vehicles - Functional Safety - Part 10: Guideline on ISO26262 30

Rules for ISO/TS 16949 Certification Scheme 31

SASIG 3D Annotated Model Standard 31

SASIG Digital Engineering Visualization 31

SASIG Long Term Archiving and Retrieval (LTAR) 32

SASIG Long Term Archiving and Retrieval - Process

Recommendation 32

SCACTIL - Standard Carrier Alpha Code Trailer ID Label 57

Service Production Part Approval Process (Service PPAP) 32

Single-and Multi-Use Container Systems Guideline 58

SPC QuickStart Guide 33

SPC Short Run Supplement 33

Special Process: Casting System Assessment 33

Special Process: Coating System Assessment 34

Special Process: Heat Treat System Assessment 34

Special Process: Molding System Assessment 35

Special Process: Plating System Assessment 35

Special Process: Soldering System Assessment 36

Special Process: Welding System Assessment 36

Supplier Electronic Network Connectivity 59

Supplier & Product Reliability Assurance 37

Supplier Quality Requirements 5-Pack 37

Supply Chain Security Toolkit for the Automotive Industry 59

Syntax for High Capacity ADC Media 59

T.120 Automotive Data Conferencing Architecture 59

The ABC’s of GHS Compliant Safety Data Sheets & Labels 9

The Cost of Poor Quality Guide 37

Trading Partner Labels Implementation Guideline 60

Transaction Set 824 60

TREAD Act VMRS System & Assembly Code MAP 38

User’s Guide for Corrugated Plastic 60

Vehicle ID Number (VIN) Label Application Standard 60

Warranty Claims Data Exchange 38

Training and CertificationProgramsAdvanced Geometric Dimensioning and Tolerancing (GD&T) 63

Advanced Product Quality Planning & Control Plan (APQP) 83

AIAG Supply Chain Sustainability eLearning 62

Applied SPC and MSA for Practitioners 83

APQP How-To Workshop 84

APQP/PPAP Certification Exam 84 Auditing to ISO 26262: Functional Safety Management Systems

Standards 67 Auto Industry Certificate in Purchasing pand Supply Chain

Management 90

B-10 Trading Partners Implementation Guideline eLearning 91 B-16 Global Transport Label Standard for the Automotive

Industry eLearning 91

Core Tools Overview eLearning 84

95INDEX TRAINING

FMEA Certification Exam 85

Geometric Dimensioning and Tolerancing (GD&T) 64

Global MMOG/LE Implementation Training - Level 1 73

HTS Harmonized Tariff Schedule Overview 62

Implementing APQP, Control Plan and PPAP 86

I l ti F il M d d Eff t A l i (FMEA) 86

Poka Yoke (Mistake Proofing) for Zero Defects 78

Production Part Approval Process (PPAP) Overview 88

Quality Core Tools - Connect the Dots ELearning 88

Reliability & Maintainability Overview 79

SPC Certification Exam 88

8/17/2019 AIAG 2016 Catlog


Core Tools Self-Assessment 85

Course 1 - Regulations: Management and Compliance 64 Course 2 - Global Product Regulation Overview 64

Course 3 - Management of Product Chemical Regulatory

Compliance 64

CQI-14 Automotive Warranty Assessment Training 74 CQI-14 Pre-Assessment 74

CQI-19 Sub-Tier Supplier Management Process Guideline

eLearning 74 CQI-19 Sub-Tier Supplier Management Process Guideline

Self-Assessment 76

CQI-19 Sub-Tier Supplier Management Process Program 76

Effective Problem Solving for Practitioners 77 Executive Seminar: Automotive Industry Global Purchasing

and Supply Chain Management 91

Exemplar Global-Certified ISO 9001 Internal Auditor Training

with ISO/TS 16949 Automotive Emphasis 69

Exemplar Global-Certified ISO 9001 Lead Auditor Training

with AIAG ISO/TS 16949 Supplier Auditor Certification 70

Exemplar Global-Certified ISO 14001 EMS Lead Auditor 65

Failure Mode and Effects Analysis (FMEA) Overview 85

Implementing Failure Mode and Effects Analysis (FMEA) 86

Implementing Layered Process Audits (LPA) 77

Implementing Statistical Process Control (SPC) 86

Integrating ISO 14001 and ISO 9001 65

Integrating ISO 14001 and ISO/TS 16949 66

Introduction to Design Review Based on Failure Modes (DRBFM) 78

iPOINT Conflict Minerals Platform (iPCMP) 61

ISO 14001 EMS Understanding and Internal Auditing 66

ISO 14001 Executive Understanding 66

ISO 26262 Overview: Functional Safety Management Systems 67

ISO/IEC 17025:2005 Internal Quality Auditing Training 68

ISO/TS 16949 Executive Understanding 70

ISO/TS 16949 Internal Quality Auditing 71

ISO/TS 16949 Supplier Auditor Certification 71

ISO/TS 16949 Supplier Auditor Recertification 72

Leadership’s Role in a Successful Layered Process Audit (LPA) 78

Measurement Systems Analysis (MSA) with Applications 86

MSA Certification Exam 87

NAFTA Content Reporting 63

On the Job With GHS eLearning 65

PFMEA in Context 87

Supplier & Product Reliability Assurance - Publication D32 79

Supply Chain Sustainability Knowledge Assessment 62

Taking Effective Corrective Action: Using the 8-D Approach 79

Training and Certification Programs 61

Understanding and Implementing APQP with PPAP 89

Understanding and Implementing FMEA 89

Understanding and Implementing MSA and SPC Basics 90

Understanding ISO 26262: Functional Safety Management

Systems 67

Understanding ISO/IEC 17025:2005 68

Understanding ISO/TS 16949 72

Understanding the Casting Special Process System Assessments 80

Understanding the Heat Treat, Soldering and

Welding Special Process System Assessments 80

Understanding the Molding Special Process System Assessment 80

Understanding the Plating and Coating Special Process System

Assessment 81

VDA 6.3 - Examination for Certified Process Auditor (Module C) 81

VDA 6.3 - General Basics for New Process Auditors (Module A) 81

VDA 6.3 - Process Audit - Product Life Cycle (Module BII) 82

VDA 6.3 - Qualification as Process Auditor in Product Life Cycle

with Certified Examination (Module E) 82

26200 Lahser Road, Suite 200Southfield, MI 48033p: (248) 358-3003 | f: (248) 799-7995 | www.aiag.org

8/17/2019 AIAG 2016 Catlog


04.27.2016

04.28.2016

09.29.2016

09.30.2016

QUALITY SUMMIT

11.08.2016

CUSTOMS TOWN HALLCORPORATE

RESPONSIBILITY SUMMIT

06.14.2016

SUPPLY CHAIN SUMMIT

10.11.2016

10.12.2016

IMDS & PRODUCT CHEMICAL

COMPLIANCE CONFERENCE

SAVE THE DATES