Upload
donhan
View
238
Download
1
Embed Size (px)
Citation preview
39GGalaxyy
Air Handling Unit
MAXIMIZING PERFORMANCE, ENERGY SAVINGS & COMFORT
Contents
Page
Features 3 - 5
Basic Construction 6
Quick Selection 7
Dimension 8 - 9
Fan Discharge Outlet Dimension 10
Horizontal Fan Arrangements 11
Mixing Box Section in Module 12
Center to Center Distance for Fan & Motor configuration 13 - 14
Base Unit Casing Weight 15 - 17
Fan Motor Weight 18
Fan Blower Specifications 19 - 20
Filter Type, Dimension and Quantity 21
Coil Weight 22
Guide Specifications 23 - 26
2
CISB 39G offers
• Units are design in accordance to:- ARI Standard for coils (ARI 410)
• Double wall with 1” & 2” 40kg/m³ CFC-Free PU insulation (HCFC 141b). Isolates insulation exposure tothe air stream.
• Wide range of coil offering – 4, 5, 6, 7, 8 rows and 8, 10, 12, 14 FPI for chilled water. Optimized coilcircuiting. DX Coil (4, 6 rows) and Hot Water Coil (1, 2 rows) are also available.
• All chilled water, DX and Hot Water coils are factory pressure tested at 400 psig as standard.
• Coil tracks enable easy coil removal for complete cleaning and assurance of a dry unit interior.
• Powder painted sloped galvanized steel drain pan with bottom drainage.
• Forward curved, Backward curved and Airfoil fan.- Forward curved – sizes 160 to 1000mm diameter
/ f- Backward curved / Airfoil blade – sizes 225 to 1000mm diameter
• Low leak construction with hex socket compression, type latch and nitrile gasket on mating panelparameter.
• Factory installed unit base of 100mm height, constructed of 14 gauge galvanized steel.
50mm Non-Thermal Bridge (NTB) features
• Composite Corner Piece (Trileg) – ABS material.
• Non-Thermal Bridge (NTB) Aluminium Frame Extrusion.
• Non-Thermal Bridge (NTB) sandwiched panels and access doors.
N Th l B id (NTB) lit l t f fitti• Non-Thermal Bridge (NTB) quality panel to frame fitting.
• No condensation problems in humid environment at low internaltemperatures.
• Rigid construction with aluminium frame work and machine-injectedrigid polyurethane foam panels.
• Spring mounted fans for low vibration transmission.
3
CISB 39G Standard offerings
Compression Latch (Hex Socket)Only requires the use of hexagon wrench to open / close the access door
Chilled Water Coil with Steel Header Coils are of aluminium/copper plate fins with belled collars and bonded to
12.7mm OD copper tubes by mechanically expansion. The coils have l i d t l i d t l h d ith l th d d tigalvanized steel casing and steel headers with male threaded connections.
Sloping Drain Pan and Drain OutletNew drain pan assembly for better drainage, bottom access drain and sloping for rapid water flow and better Internal Air Quality (IAQ). Ready to couple with
male connection.
Direct Expansion Coil (DX coil)Coils are aluminium/copper with belled collars and bonded 12.7mm OD copper tubes by mechanically expansion. Coil are provided with brass distributors with
sweat type connections.
Spring IsolatorAs standard from the factory the fan and motor assembly are mounted on a
Assembly Fan Housing Motor and BaseFMB are made of painted heavy gauge mild steel (for fan size 450 and above) As standard from the factory, the fan and motor assembly are mounted on a
common base with color-coded internally mounted spring isolators, which saves site installation cost.
FMB are made of painted heavy gauge mild steel (for fan size 450 and above) or power strut type (for fan size 160 to 400) to ensure proper and easy
installation fan housing and motor.
4
CISB 39G Standard offerings
Bearing ArmSelf aligning double row ball bearings mounted within a cost iron housing
supported on tubular bearing arm assembly.
Taper Lock PulleyAbility to change diameter of pulley according to fan shaft. Pulleys with taper
lock bush allows for convenient dismantling and maintenance of drive package, besides offering fle ibilit in interchanging for different shaft si esbesides offering flexibility in interchanging for different shaft sizes.
Fan Discharge CollarFlanged discharge collar to provide easy ducting connection.
Handle GrabLarge and Non-Conductive handles for easy panel removal.
Accessory High Velocity Filter (HVF) Frame DampersAccessory High Velocity Filter (HVF) FrameFor “free air return” application, factory supplied 75mm HVF track is an option
instead of one module casing resulting in shorter overall unit length.
DampersMixing boxes are equipped with opposed blades interconnected outside with
return air dampers.
5
Basic Construction
39G 25mmFrame Construction
39G 50mmFrame Construction
39G 50mm NTBFrame Construction
39G 25mmPanel (Double Skin)
39G 50mmPanel (Double Skin)
39G 50mm NTBPanel (Sandwich)
39G 25mmFrame Panel Construction
39G 50mmFrame Panel Construction
39G 50mm NTBFrame Panel Construction
39G 25mmTrileg Construction
39G 50mmTrileg Construction
39G 50mm NTBTrileg ConstructionTrileg Construction Trileg Construction Trileg Construction
6
Quick Selection
Carrier offers you three easy quick selection steps for 39G:
1.) Determine the unit size based on air flow or coil face area.a.) 1.5m/s minimum velocity (cooling or heating).b.) 2.5m/s maximum velocity for cooling coil without drift eliminator.c.) 4.5m/s maximum velocity for heating coil only.
2.) Use roughing-in dimensions (Pg 8) to find approximate size of base unit and it's accessory sections.
3.) Compute weights of base casing unit (Pg 15-17).
4.) To compute total of unit weight and respective fan, coil and motor drive package weight (if applicable) .
Unit Size Selection39G Coil Face Area Air Volume (ℓ/s) x 100039G
Unit SizeCoil Face Area
(m²)Air Volume (ℓ/s) x 1000
1.5 m/s 2.5 m/s 4.5 m/s0608 0.221 0.33 0.55 0.990609 0.302 0.45 0.76 1.360711 0.447 0.67 1.12 2.010811 0.559 0.84 1.40 2.510912 0.685 1.03 1.71 3.080913 0.754 1.13 1.89 3.390914 0.824 1.24 2.06 3.711015 1.057 1.58 2.64 4.751117 1.372 2.06 3.43 6.171317 1.646 2.47 4.11 7.411418 1.858 2.79 4.65 8.361420 2 099 3 15 5 25 9 451420 2.099 3.15 5.25 9.451621 2.570 3.86 6.43 11.571822 3.203 4.80 8.01 14.411825 3.698 5.55 9.25 16.642025 3.983 5.97 9.96 17.922125 4.267 6.40 10.67 19.202226 4.606 6.91 11.52 20.732230 5.394 8.09 13.48 24.272234 6.181 9.27 15.45 27.812634 7.377 11.07 18.44 33.20
Note:For application where face velocity exceed 2.6m/s (for cooling only), drift eliminators is recommended to avoidmoisture carry over under normal operating condition.
We have made available a computer program to finalize your selections. Please contact yourCarrier representative for a computer selection based on your "Quick Selection" plus the design
t f li ti
Computer Selection
parameters of your application.
7
DISC
ACS
Leng
th
(m
m)Le
ngth
(mm)
500
600
500
600
500
600
500
600
500
600
500
600
500
600
500
600
500
600
500
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
800
600
800
600
800
600
800
600
800
600
800
600
900
600
900
600
900
600
900
600
900
600
900
600
1100
600
1100
600
1100
600
1100
600
1100
600
1100
600
1100
600
1100
600
1100
600
1100
600
Plen
um
Acce
ss
Disc
harg
e ec
tion
with
Da
mper
R BC
FFC
F OR
BCF
DIF
th
m)
Heig
ht
(m
m)Le
ngth
(mm)
060
030
00
600
300
060
030
00
600
300
070
030
00
700
300
080
030
00
800
300
090
030
00
900
300
090
030
00
900
300
090
030
00
900
300
090
030
00
1000
300
010
0030
00
1100
300
010
0030
00
1100
300
011
0030
00
1200
300
012
0060
00
1300
600
013
0060
00
1500
600
-60
0-
600
-60
0-
600
-60
0-
600
-60
0-
600
-60
0-
600
-60
0-
600
-60
0-
600
-60
0-
600
ctio
n Verti
cal
Diffu
ser
Sect
ion
SHo
rizon
tal
HTR
FCF
OR B
CFFC
F O R
Leng
th
(m
m)Le
ngth
(mm)
Leng (m
m30
060
090
030
060
090
030
060
090
030
070
090
030
070
090
030
070
090
030
070
090
030
070
090
030
070
090
030
080
090
030
080
090
030
080
090
030
080
090
030
090
090
030
090
090
030
090
090
030
090
090
030
011
0011
030
090
090
030
011
0011
030
011
0011
030
011
0011
030
011
0011
030
013
0013
030
013
0013
030
014
0014
030
013
00-
300
1400
-30
014
00-
300
1500
-30
014
00-
300
1500
-30
015
00-
300
1700
-30
015
00-
300
1700
-30
017
00-
300
1900
-30
017
00-
300
1900
-30
019
00-
300
2000
-
n
Heat
er
Sect
ion
Fan
Sec
A Fi
lter
Cool
ing
coil
/ Dua
l coi
l (H
orizo
ntal)
Hot w
ater
co
il (H
orizo
ntal)
EPA
CWHW
gth
m)Le
ngth
(mm)
Leng
th
(m
m)00
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
000
600
300
0060
030
0
Inte
rnal
Size
Sec
tion
Coil S
ectio
n
Bag
Filte
r/
LVF
HVF
Filte
rHE
P A
BF/L
VFHV
FHE
Leng
th
(m
m)Le
ngth
(mm)
Len (m
600
300
9 060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
600
300
9060
030
090
Filte
r Sec
tion
Box
Doub
le
Mixin
g Bo
xEc
onom
ized
Mixin
g Bo
x
DBL
MXB
ECN
MXB
h
Leng
th
(m
m)Le
ngth
(mm)
1000
500
1000
500
1000
500
1000
500
1000
500
1000
500
1000
500
1000
500
1000
500
1000
500
1000
600
1000
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1200
600
1800
600
1800
600
1800
600
1800
600
1800
600
1800
600
1800
600
1800
600
1800
600
1800
600
1800
600
1800
600
Mixin
g Bo
x Sec
tion
ow.
sepa
rate
pack
aging
.
Mixin
g B
MXB
th
m) H
eight
(m
m)W
idth
(m
m)Le
ngth
(mm)
070
090
050
00
700
900
500
070
010
0050
00
700
1000
500
080
012
0050
00
800
1200
500
090
012
0050
00
900
1200
500
010
0013
0050
00
1000
1300
500
010
0014
0060
00
1000
1400
600
010
0015
0060
00
1000
1500
600
011
0016
0060
00
1100
1600
600
012
0018
0060
00
1200
1800
600
014
0018
0060
00
1400
1800
600
015
0019
0080
00
1500
1900
800
015
0021
0080
00
1500
2100
800
017
0022
0080
00
1700
2200
800
019
0023
0090
00
1900
2300
900
019
0026
0090
00
1900
2600
900
021
0026
0090
00
2100
2600
900
022
0026
0011
000
2200
2600
1100
023
0027
0011
000
2300
2700
1100
023
0031
0011
000
2300
3100
1100
023
0035
0011
000
2300
3500
1100
027
0035
0011
000
2700
3500
1100
tern
al Si
ze50
mm
oil se
ction
for m
odel
0914
and
belo
nd co
il sec
tion
will b
e de
liver
ed in
s
ns eight
mm
)W
idth
(m
m) H
eight
(m
m)W
idt
(mm
600
800
650
850
600
800
650
850
600
900
650
950
600
900
650
950
700
1100
750
1150
700
1100
750
1150
800
1100
850
1150
800
1100
850
1150
900
1200
950
1250
900
1200
950
1250
900
1300
950
1350
900
1300
950
1350
900
1400
950
1450
900
1400
950
1450
000
1500
1050
1550
000
1500
1050
1550
100
1700
1150
1750
100
1700
1150
1750
300
1700
1350
1750
300
1700
1350
1750
400
1800
1450
1850
400
1800
1450
1850
400
2000
1450
2050
400
2000
1450
2050
600
2100
1650
2150
600
2100
1650
2150
800
2200
1850
2250
800
2200
1850
2250
800
2500
1850
2550
800
2500
1850
2550
000
2500
2050
2550
000
2500
2050
2550
100
2500
2150
2550
100
2500
2150
2550
200
2600
2250
2650
200
2600
2250
2650
200
3000
2250
3050
200
3000
2250
3050
200
3400
2250
3450
200
3400
2250
3450
600
3400
2650
3450
600
3400
2650
3450
Inte
rnal
Size
Ex25
mm
il unit
shipp
ing o
ption
:un
it, fac
tory p
re-jo
in the
fan
and
co9G
1015
and
abo
ve, f
an se
ction
an
Dim
ensi
on He (m
160
618
06
180
620
06
200
722
57
225
825
08
250
928
09
280
931
59
315
935
59
355
1040
010
400
1145
011
400
1345
013
450
1450
014
500
1456
014
560
1663
016
560
1863
018
630
1871
018
630
2071
020
710
2180
021
710
2280
022
800
2290
022
800
2290
022
900
2610
0026
2125
2230
2634
0811
0913
1015
1317
1420
1822
2025
2226
2234
0914
1117
1418
1621
1825
0608
0609
0711
091239G
Unit
Size
sFa
n Si
ze
Note
:Ve
rtical
Fan
+ Co
•Fo
r ver
tical
u•
For m
odel
39
8
Unit Dimension Calculations
External AHU Length
External AHU Length = (Section Length + K)mmg ( g )where, K = 50mm (for 25mm casing thickness) or 100mm (for 50mm casing thickness)
If the AHU module length is more than 2000mm, section will be split into several casing for shipping purposes.
For example,
A.) 39G1522, MXB-BF-CCS-FS, Fan Size 500, Horizontal AHU with 50mm casing thickness
Module length is 800 + 600 + 600 + 1100mm equals to 3100mmModule length is 800 + 600 + 600 + 1100mm, equals to 3100mm.
Unit will be split into two section: 1.) MXB-BF-CCS: 800 + 600 + 600 = 2000 + K(100) = 2100mm2.) FS: 1100 = 1100 + K(100) = 1200mm
Total AHU Length= 3300mm
B.) 39G1522, MXB-BF-CCS-FS, Fan Size 500, Vertical AHU with 50mm casing thickness
Module length is 900 + 600 + 1100mm, equals to 2600mm.
Unit will be split into two section: 1.) MXB-BF: 800 + 600 = 1400 + K(100) = 1500mm2.) FS: 1100 = 1100 + K(100) = 1200mm
Total AHU Length= 2700mm
Note: The fan is on top of the coil section, just apply the fan section length for calculation.
External AHU Width
External AHU Width = (Module Width + K)mmwhere, K = 50mm (25mm casing thickness) or 100mm (50mm casing thickness)
For example:
A.) 39G1522, MXB-BF-CCS-FS, Fan Size 500, Horizontal AHU with 50mm casing thicknessAHU width = 2200mm + K (100mm) = 2300mm
External AHU Height
A.) Horizontal AHU = (Module height + K + 100)mmwhere, K = 50mm (for 25mm casing thickness) or 100mm (for 50mm casing thickness)
For example 39G1500, MXB-BF-CCS-FS, Fan Size 500, Horizontal with 50mm casing thickness
AHU Height = (1500 + 100 + 100)mm = 1700mm
B.) Vertical AHU = (Section Vertical Height + Fan Section Vertical Height + 2K + 100)mmwhere, K = 50mm (for 25mm casing thickness) or 100mm (for 50mm casing thickness)
For example: 39G1522, MXB-BF-CCS-FS, Fan Size 500, Vertical AHU with 50mm casing thickness
AHU Height = (1500 + 1200 + 100 + 100)mm = 3000mm
9
25mm
50mm
518
543
506
531
506
531
443
468
443
468
427
452
427
452
412
437
412
437
340
365
340
365
362
387
362
387
343
368
343
368
319
344
319
344
427
452
319
344
427
452
427
452
388
413
388
413
485
510
485
510
502
527
485
510
502
527
502
527
512
537
502
527
512
537
512
537
634
659
512
537
634
659
634
659
707
732
634
659
707
732
634
659
707
732
634
659
707
732
707
732
678
703
UBR
(Ver
t)50
mm25
mm50
mm18
421
824
318
620
623
118
620
623
119
024
326
819
024
326
821
722
725
221
722
725
222
021
223
722
021
223
722
524
026
522
524
026
524
517
620
124
517
620
135
514
617
135
514
617
133
511
614
133
511
614
135
714
617
133
511
614
135
714
617
135
714
617
133
511
514
033
511
514
041
314
116
641
314
116
646
013
816
341
314
116
646
013
816
346
013
816
346
213
115
646
013
816
346
213
115
646
213
115
655
410
012
546
213
115
655
410
012
555
410
012
563
210
412
955
410
012
563
210
412
955
410
012
563
210
412
955
410
012
563
210
412
963
210
412
966
596
121
BRUB
F (V
ert)
25mm
50mm
25mm
274
299
159
248
273
161
248
273
161
317
342
165
317
342
165
259
284
192
259
284
192
222
247
195
222
247
195
277
302
200
277
302
200
214
239
220
214
239
220
155
180
330
155
180
330
120
145
310
120
145
310
237
262
332
120
145
310
237
262
332
237
262
332
192
217
310
192
217
310
237
262
388
237
262
388
237
262
435
237
262
388
237
262
435
237
262
435
205
230
437
237
262
435
205
230
437
205
230
437
205
230
529
205
230
437
205
230
529
205
230
529
207
232
607
205
230
529
207
232
607
205
230
529
207
232
607
205
230
529
207
232
607
207
232
607
134
159
640
DBF
D B0m
m25
mm50
mm24
321
824
323
120
623
123
120
623
126
824
326
826
824
326
825
222
725
225
222
725
223
721
223
723
721
223
726
524
026
526
524
026
520
126
228
720
126
228
717
134
336
817
134
336
814
131
934
414
131
934
417
142
745
214
131
934
417
142
745
217
142
745
214
038
841
314
038
841
316
648
551
016
648
551
016
350
252
716
648
551
016
350
252
716
350
252
715
651
253
716
350
252
715
651
253
715
651
253
712
563
465
915
651
253
712
563
465
912
563
465
912
970
773
212
563
465
912
970
773
212
563
465
912
970
773
212
563
465
912
970
773
212
970
773
212
167
870
3
EUB
Rmm
50mm
25mm
503
318
218
23
318
206
23
318
206
23
318
243
23
318
243
23
318
227
23
318
227
23
318
212
23
318
212
23
318
240
23
318
240
23
318
176
23
318
176
23
318
146
13
318
146
13
318
116
13
318
116
18
353
146
13
318
116
18
353
146
18
353
146
18
353
115
18
353
115
18
353
141
18
353
141
18
353
138
18
353
141
18
353
138
18
353
138
18
353
131
18
353
138
18
353
131
18
353
131
18
353
100
18
353
131
18
353
100
18
353
100
18
353
104
18
353
100
18
353
104
18
353
100
18
353
104
18
353
100
18
353
104
18
353
104
18
353
961
BHF
UBF
n (m
m)
25mm
50mm
25m
403
428
293
416
441
293
416
441
293
394
419
293
425
450
293
438
463
293
438
463
293
453
478
293
453
478
293
464
489
293
464
489
293
485
510
293
485
510
293
497
522
293
509
534
293
536
561
293
536
561
293
599
624
328
536
561
293
599
624
328
564
589
328
585
610
328
585
610
328
624
649
328
624
649
328
665
690
328
659
684
328
700
725
328
700
725
328
754
779
328
700
725
328
754
779
328
719
744
328
808
833
328
754
779
328
843
868
328
843
868
328
869
894
328
843
868
328
869
894
328
808
833
328
869
894
328
808
833
328
869
894
328
869
894
328
871
896
328
THF
t Dim
ensi
on
25mm
50mm
480
505
214
455
480
238
555
580
238
528
553
265
658
683
265
626
651
297
626
651
297
596
621
327
696
721
327
640
665
370
740
765
370
747
772
413
847
872
413
748
773
462
848
873
462
789
814
516
889
914
516
870
895
578
889
914
516
870
895
578
970
995
578
895
920
647
970
995
647
970
995
724
970
995
724
933
958
810
938
963
724
1068
1093
810
1085
1110
810
1088
1113
907
1085
1110
810
1088
1113
907
1088
1113
907
1071
1096
1016
1082
1107
907
1171
1196
1016
1171
1196
1016
1168
1193
1139
1571
1596
1016
1343
1368
1139
1171
1196
1016
1143
1168
1139
1471
1496
1016
1243
1268
1139
1343
1368
1139
1203
1228
1276
BC=
D
harg
e O
utle
t
25mm
50mm
1.515
718
21.5
157
182
415
718
24
157
182
7.522
525
05.5
225
250
5.522
525
05.5
225
250
7.522
525
07.5
241
266
1024
126
610
190
215
2019
021
515
241
266
2024
126
615
245
270
2034
537
025
302
327
2034
537
025
302
327
3030
232
725
308
333
3043
345
830
357
382
3045
748
230
407
432
2558
961
440
372
397
4065
668
160
555
580
4065
668
160
555
580
6055
558
040
463
488
6066
268
760
463
488
6086
388
875
743
768
6086
388
875
968
993
6066
368
860
568
593
7586
388
875
968
993
7596
899
375
971
996
A
Max H
P
Fan
Dis
ch
10
160
180
180
200
200
225
225
250
250
280
280
315
315
355
355
400
400
450
400
450
450
500
500
560
560
630
560
630
630
710
630
710
710
800
710
800
800
900
800
900
800
900
800
900
900
1000
39G
Unit
Size
Fan
Si
ze
1822
0811
0912
1317
1418
0608
0609
0711
1420
1621
0913
0914
1015
1117
1825
2634
2234
2025
2328
2333
2125
2226
2230
Refer
to p
age
11.
Horizontal Fan Arrangements
Side Elevation
Front Elevation
11
Mixing Box Section in Module
TOP REAR SIDE BOTTOM TOP REAR SIDE BOTTOMDAMPER OPENING SIZE (H x W in mm)39G
AHU Size MXBOPPOSED BLADE DAMPER (H x W in mm)
0608 500 460 x 748 460 x 748 560 x 448 260 x 448 410 x 678 410 x 678 510 x 448 210 x 3780609 500 460 x 848 460 x 848 560 x 448 260 x 548 410 x 778 410 x 778 510 x 448 210 x 4780711 500 460 x 1048 460 x 1048 660 x 448 260 x 748 410 x 978 410 x 978 610 x 448 210 x 6780811 500 460 x 1048 460 x 1048 760 x 448 260 x 748 410 x 978 410 x 978 710 x 448 210 x 6780912 500 460 x 1148 460 x 1148 860 x 448 260 x 848 410 x 1078 410 x 1078 810 x 448 210 x 7780913 600 560 x 1248 560 x 1248 860 x 548 360 x 948 510 x 1178 510 x 1178 810 x 548 310 x 8780913 600 560 x 1248 560 x 1248 860 x 548 360 x 948 510 x 1178 510 x 1178 810 x 548 310 x 8780914 600 560 x 1348 560 x 1348 860 x 548 360 x 1048 510 x 1278 510 x 1278 810 x 548 310 x 9781015 600 560 x 1448 560 x 1448 960 x 548 360 x 1148 510 x 1378 510 x 1378 910 x 548 310 x 10781117 600 560 x 1648 560 x 1648 1060 x 548 360 x 1348 510 x 1578 510 x 1578 1010 x 548 310 x 12781317 600 560 x 1648 560 x 1648 1260 x 548 360 x 1348 510 x 1578 510 x 1578 1210 x 548 310 x 12781418 800 760 x 1748 760 x 1748 1360 x 748 560 x 1448 710 x 1678 710 x 1678 1310 x 678 510 x 13781420 800 760 x 1948 760 x 1948 1360 x 748 560 x 1648 710 x 1878 710 x 1878 1310 x 678 510 x 15781621 800 760 x 2048 760 x 2048 1560 x 748 560 x 1748 710 x 1978 710 x 1978 1510 x 678 510 x 16781822 900 860 x 2148 860 x 2148 1760 x 848 660 x 1848 810 x 2078 810 x 2078 1710 x 778 610 x 17781825 900 860 x 2448 860 x 2448 1760 x 848 660 x 2148 810 x 2378 810 x 2378 1710 x 778 610 x 20782025 900 860 x 2448 860 x 2448 1960 x 848 660 x 2148 810 x 2378 810 x 2378 1910 x 778 610 x 20782125 1100 1060 x 2448 1060 x 2448 2060 x 1048 860 x 2148 1010 x 2378 1010 x 2378 2010 x 978 810 x 20782125 1100 1060 x 2448 1060 x 2448 2060 x 1048 860 x 2148 1010 x 2378 1010 x 2378 2010 x 978 810 x 20782226 1100 1060 x 2548 1060 x 2548 2160 x 1048 860 x 2248 1010 x 2478 1010 x 2478 2110 x 978 810 x 21782230 1100 1060 x 2948 1060 x 2948 2160 x 1048 860 x 2648 1010 x 2878 1010 x 2878 2110 x 978 810 x 25782234 1100 1060 x 3348 1060 x 3348 2160 x 1048 860 x 3048 1010 x 3278 1010 x 3278 2110 x 978 810 x 29782328 1100 1060 x 2748 1060 x 2748 2260 x 1048 860 x 2448 1010 x 2678 1010 x 2678 2210 x 978 810 x 23782333 1100 1060 x 3248 1060 x 3248 2260 x 1048 860 x 2948 1010 x 3178 1010 x 3178 2210 x 978 810 x 28782634 1100 1060 x 3348 1060 x 3348 2560 x 1048 860 x 3048 1010 x 3278 1010 x 3278 2510 x 978 810 x 2978
12
60hp
75 h
p10
0 hp
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-35
--
--
-35
--
35-
-59
--
35-
-59
--
59-
-5
804
804
59-
-5
804
804
580
480
439
905
905
hp25
~ 30
hp
40 h
p50
~ 6
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-15
3-
--
--
153
--
153
--
230
--
230
--
315
--
315
--
436
409
-31
5-
-43
640
9-
436
409
-54
451
753
436
409
-54
451
753
544
517
5371
468
765
544
517
5371
468
765
714
687
6587
184
481
714
687
6 587
184
481
871
844
8199
496
89 3
(in m
m)
~ 5.5
hp
7.5 ~
10 h
p15
~ 20
h-
--
179
--
179
--
206
193
-20
619
3-
212
198
-21
219
8-
218
203
-21
820
3-
246
230
-24
623
0-
228
221
215
228
221
215
267
259
226
267
259
226
308
299
264
308
299
264
229
206
175
308
299
264
229
206
175
229
206
175
305
282
251
305
282
251
390
367
337
390
367
337
509
487
457
390
367
337
509
487
457
509
487
457
617
595
566
509
487
457
617
595
566
617
595
566
786
764
735
617
595
566
786
764
735
786
764
735
942
921
891
786
764
735
942
921
891
942
921
891
1068
1046
1015
THF/
THR
CTCD
(
ratio
n
1 hp
1.5 ~
2hp
3 ~ 4
hp5
196
196
-17
917
917
817
917
917
824
223
422
024
223
422
022
522
322
222
522
322
223
423
122
923
423
122
926
826
426
226
826
426
224
123
623
224
123
623
228
127
727
228
127
727
232
331
831
332
331
831
3-
-24
832
331
831
3-
-24
8-
-24
8-
-32
4-
-32
4-
-40
9-
-40
9-
-52
8-
-40
9-
-52
8-
-52
8-
-63
6-
-52
8-
-63
6-
-63
6-
-80
5-
-63
6-
-80
5-
-80
5-
-96
1-
-80
5-
-96
1-
-96
1-
-10
92
or C
onfig
ur
0 ~ 60
hp75
hp
100 h
p1
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-64
3-
--
--
643
--
643
--
848
--
643
--
848
--
848
--
1023
988
988
848
--
1023
988
988
1023
988
988
1138
1101
1101
an a
nd M
oto
~ 20 h
p25
~ 30
hp
40 h
p5
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-25
4-
-25
4-
-28
2-
-28
2-
-33
7-
-33
7-
-29
527
2-
337
--
295
272
-29
527
2-
375
352
-37
535
2-
473
449
-47
344
9-
600
576
548
473
449
-60
057
654
860
057
654
872
670
367
560
057
654
872
670
367
572
670
367
593
090
787
972
670
367
593
090
787
993
090
787
910
510
8210
5493
090
787
910
510
8210
5410
510
8210
5422
011
9711
69
CD (i
n m
m)
tanc
e fo
r Fa
5 ~ 5.
5 hp
7.5 ~
10 h
p15
~-
-18
4-
184
-21
519
821
519
823
121
323
121
324
622
624
622
628
226
128
226
128
227
02
282
270
233
332
02
333
320
238
837
53
388
375
335
232
82
388
375
335
232
82
352
328
243
340
93
433
409
353
050
64
530
506
465
663
36
530
506
465
663
36
656
633
678
275
97
656
633
678
275
97
782
759
798
696
39
782
759
798
696
39
986
963
911
6111
381
986
963
911
6111
381
1161
1138
112
7512
521 2
BHF/
BHR
CTC
Cen
ter
Dis
t
1 hp
1.5 ~
2hp
3 ~ 4
hp20
320
1-
194
191
188
194
191
188
260
248
234
260
248
234
254
249
245
254
249
245
269
262
257
269
262
257
310
305
300
310
305
300
304
297
290
304
297
290
355
348
341
355
348
341
411
404
397
411
404
397
--
370
411
404
397
--
370
--
370
--
451
--
451
--
548
--
548
--
675
--
548
--
675
--
675
--
801
--
675
--
801
--
801
--
1005
--
801
--
1005
--
1005
--
1180
--
1005
--
1180
--
1180
--
1294
Cen
ter
to
13
160
180
180
200
200
225
225
250
250
280
280
315
315
355
355
400
400
450
400
450
450
500
500
560
560
630
560
630
630
710
630
710
710
800
710
800
800
900
800
900
900
1000
2634
0609
0811
0913
1015
1317
1420
1822
2025
2226
2234
1418
1621
1825
2125
2230
0608
0711
0912
0914
1117
39G
Unit
Size
Fan
Size
0hp
75 h
p10
0 hp
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
8-
--
-8
--
8-
-3
--
8-
-3
--
3-
-0
677
677
3-
-0
677
677
067
767
72
740
740
p25
~ 30
hp
40 h
p50
~ 60
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-22
4-
--
--
224
--
224
--
283
--
283
--
346
--
346
--
431
406
-34
6-
-43
140
6-
431
406
-53
050
547
843
140
6-
530
505
478
530
505
478
658
631
603
530
505
478
658
631
603
658
631
603
763
737
710
658
631
603
763
737
710
763
737
710
824
799
772
in m
m)
~ 5.5
hp7.5
~ 10
hp
15 ~
20 h
p-
--
178
--
178
--
242
242
-24
224
2-
232
232
-23
223
2-
213
213
-21
321
3-
291
291
-29
129
1-
267
267
251
267
267
251
255
255
239
255
255
239
263
263
245
263
263
245
293
272
243
263
263
245
293
272
243
293
272
243
353
331
303
353
331
303
412
392
364
412
392
364
498
478
450
412
392
364
498
478
450
498
478
450
598
578
550
498
478
450
598
578
550
598
578
550
728
707
678
598
578
550
728
707
678
728
707
678
832
811
783
728
707
678
832
811
783
832
811
783
891
871
843
DBF/
DBR
CTCD
(i
ratio
n
hp
1.5 ~
2hp
3 ~ 4
hp5 ~
0620
1-
9919
319
399
193
193
5725
125
157
251
251
4824
124
148
241
241
3122
322
331
223
223
1030
230
210
302
302
8727
827
887
278
278
7826
826
878
268
268
0127
827
801
278
278
--
311
0127
827
8-
-31
1-
-31
1-
-37
0-
-37
0-
-43
0-
-43
0-
-51
6-
-43
0-
-51
6-
-51
6-
-61
6-
-51
6-
-61
6-
-61
6-
-74
7-
-61
6-
-74
7-
-74
7-
-85
0-
-74
7-
-85
0-
-85
0-
-90
5
or C
onfig
ur
~ 60
hp75
hp
100 h
p1
--
-2
--
-1
--
-1
--
-2
--
-2
--
-2
--
-2
--
-2
--
-2
--
-3
--
-3
--
-2
--
-2
--
-2
--
-2
--
-3
--
-3
--
--
--
3-
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-52
6-
--
--
526
--
526
--
680
--
526
--
680
--
680
--
838
803
803
680
--
838
803
803
838
803
803
965
912
912
an a
nd M
oto
20 h
p25
~ 30
hp
40 h
p50
-
--
--
--
--
--
--
--
--
--
--
-28
--
28-
-58
--
58-
-07
--
07-
-36
213
-07
--
3621
3-
3621
3-
0227
9-
0227
9-
8235
9-
8235
9-
449
246
482
359
-4
492
464
449
246
408
585
557
449
246
408
585
557
0858
555
760
738
710
0858
555
760
738
710
6073
871
09
896
869
6073
871
09
896
869
989
686
945
1023
996
CD (i
n m
m)
tanc
e fo
r Fa
5 ~ 5.
5 hp
7.5 ~
10 h
p15
~ 2
--
-18
6-
-18
6-
-21
620
1-
216
201
-22
721
1-
227
211
-24
722
1-
247
221
-27
025
0-
270
250
-24
823
922
248
239
2230
329
325
303
293
2530
334
330
303
343
3029
226
923
303
343
3029
226
923
292
269
2335
833
430
358
334
3043
841
438
438
414
3856
954
651
438
414
3856
954
651
569
546
5166
364
060
569
546
5166
364
060
663
640
6081
579
276
663
640
6081
579
276
815
792
7697
395
091
815
792
7697
395
091
973
950
9111
0010
5510
4
UBF/
UBR
CTC
Cen
ter
Dis
t
1 hp
1.5 ~
2hp
3 ~ 4
hp20
320
2-
192
189
188
192
189
188
254
245
230
254
245
230
243
240
237
243
240
237
258
254
250
258
254
250
294
290
286
294
290
286
266
260
255
266
260
255
321
315
310
321
315
310
372
366
360
372
366
360
--
311
372
366
360
--
311
--
311
--
377
--
377
--
456
--
456
--
588
--
456
--
588
--
588
--
682
--
588
--
682
--
682
--
834
--
682
--
834
--
834
--
992
--
834
--
992
--
992
--
1119
Cen
ter
to
14
160
180
180
200
200
225
225
250
250
280
280
315
315
355
355
400
400
450
400
450
450
500
500
560
560
630
560
630
630
710
630
710
710
800
710
800
800
900
800
900
900
1000
2634
0609
0811
0913
1015
1317
1420
1822
2025
2226
2234
1418
1621
1825
2125
2230
0608
0711
0912
0914
1117
39G
Unit
Size
Fan
Size
CS 3 3 5 5 3 3 5 5 9 9 1 1 3 3 7 7 3 3 7 7 0 0 4 4 2 2 9 9 06 06 09 09 1 1 6 6 26 26 39 39 47 47num
ess
IFDI
SCAC
2442
4324
4243
2545
4525
4545
3054
5330
5453
3157
5531
5755
3364
5933
6459
3576
6135
7661
3679
6336
7963
3886
6738
8667
4199
7341
9973
4310
977
4310
977
4514
480
4514
480
9415
484
9415
484
0317
492
0317
492
1020
799
1020
799
1822
510
1822
510
2223
910
2223
910
2428
111
2428
111
2929
611
2929
611
4132
212
4132
212
5735
513
5735
513
6439
314
6439
314
user
ct
ion
Disc
harg
e Se
ctio
n wi
th
Damp
er
Ple n Acce
izonta
lVe
rtical
or B
CFFC
F or
BCF
D
4865
248
652
5168
259
682
7179
371
793
7483
374
833
8188
391
883
9592
395
923
9894
307
943
1699
316
993
3211
04
5413
24
4211
64
6513
94
7514
64
7514
64
8615
39
212
178
923
519
410
249
190
1025
4-
1126
9-
1129
5-
1131
0-
1130
8-
1232
4-
1233
2-
1236
9-
1234
8-
1238
6-
1241
8-
1445
6-
1446
4-
1550
6-
1554
3-
1656
5-
16
Fan
Sect
ion
Diff
Sec
t Wate
r riz
ontal
)Ho
ri
HWHT
RFC
F o
2122
421
224
2123
521
235
2527
725
277
2628
726
287
2730
827
309
2932
929
329
3032
930
321
3134
131
341
3437
134
371
3539
135
391
3740
137
401
3943
139
432
4246
242
462
4550
245
502
4853
248
533
5055
350
553
5056
350
563
5359
353
593
5864
458
644
6470
464
705
6774
567
745
Heat
er
Sect
ion
ght)
PA F
ilter
Cooli
ng/D
ual
(Hor
izonta
l)Ho
t(H
or
HEPA
CWH
7540
7540
7842
7842
9149
9149
9651
9651
101
5410
154
106
5710
657
109
5810
958
116
6211
662
129
6712
967
136
7013
670
143
7314
373
149
7714
977
163
8416
384
174
8917
489
189
9618
996
195
9919
599
198
100
198
100
206
104
206
104
221
114
221
114
243
128
243
128
257
133
257
133Co
il Sec
tion
Sect
ion
Wei
g
g Filte
r /
LV
FHV
F Fil
terHE
P
F / L
VFHV
FH
4322
4322
4523
4523
5327
5327
5528
5528
5930
5930
6132
6132
6332
6332
6734
6734
7337
7337
7739
7739
8040
8040
8443
8443
9246
9246
9950
9950
106
5310
653
109
5510
955
111
5611
156
116
5911
659
126
6412
664
139
7013
970
147
7414
774
Filte
r Sec
tion
ht (2
5mm
S
ouble
ng B
oxEc
onom
ized
Mixin
g Box
Bag
L MX
BEC
N MX
BBF
6537
6537
6839
6839
7946
7946
8249
8249
8855
8855
9166
9166
108
6710
867
115
7411
574
126
8312
683
135
9213
592
140
9814
098
146
105
146
105
160
119
160
119
171
131
171
131
184
142
184
142
276
152
276
152
283
157
283
157
293
166
293
166
308
183
308
183
338
203
338
203
360
226
360
226
Box S
ectio
n
it C
oil W
eig
Mixin
g Box
DoMi
xi
MXB
DBL
Fan
Size 160
3718
037
180
3920
039
200
4622
546
225
4925
049
250
5528
055
280
6631
566
315
6735
567
355
7440
074
400
8345
083
400
9245
092
450
121
500
121
500
129
560
129
560
145
630
145
560
172
630
172
630
187
710
187
630
198
271
019
82
710
232
280
023
22
710
243
280
024
32
800
264
390
026
43
800
291
390
029
13
900
320
310
0032
03
Mixin
g B
ted w
eight
in kg
.
Bas
e U
ni
15
39G
AHU
Size
2125
2226
2230
2234
2634
1420
1621
1822
1825
2025
0914
1015
1117
1317
1418
0608
0609
0711
0811
0912
0913
Note:
Esti
mat
ACS 45 45 47 47 55 55 57 57 62 62 64 64 66 66 70 70 76 76 81 81 85 85 89 89 97 97 104
104
111
111
115
115
117
117
122
122
134
134
148
148
156
156
Plen
um
Acce
ss
DIF
DISC
2544
2544
2646
2646
3156
3156
3260
3260
3467
3467
3680
3680
3782
3782
3990
3990
4310
443
104
4511
645
116
4715
447
154
9916
599
165
108
185
108
185
115
220
115
220
124
240
124
240
128
256
128
256
130
299
130
299
135
315
135
315
149
344
149
344
166
378
166
378
173
420
173
420
Diffu
ser
Sect
ion
Disc
harg
e Se
ctio
n wi
th
Damp
erHo
rizon
talVe
rtical
FCF
or B
CFFC
F or
BCF
5069
5069
5472
6272
7584
7584
7888
7888
8693
9793
101
9710
197
104
9911
499
124
106
124
106
143
118
166
141
153
124
178
149
189
156
189
156
202
164
229
191
253
208
269
224
274
-29
1-
319
-33
6-
334
-35
1-
360
-40
1-
377
-41
9-
455
-49
5-
504
-54
9-
590
-61
4-
Fan
Sect
ion
Hot W
ater
(Hor
izonta
l)
HWHT
R
2223
2223
2224
2224
2728
2728
2729
2729
2931
2931
3133
3133
3134
3134
3335
3335
3639
3639
3741
3741
3943
3943
4145
4145
4549
4549
4853
4853
5156
5156
5358
5358
5359
5359
5662
5662
6268
6268
6974
6974
7178
7178
ectio
nHe
ater
Se
ctio
n
ght)
HEPA
Filte
rCo
oling
/Dua
l (H
orizo
ntal)
HEPA
CW
7841
7841
8244
8244
9652
9652
101
5310
153
107
5710
757
112
6011
260
115
6111
561
122
6512
265
137
7013
770
144
7414
474
151
7715
177
158
8115
881
172
8917
289
184
9418
494
201
102
201
102
207
105
207
105
211
106
211
106
219
110
219
110
234
122
234
122
258
137
258
137
273
142
273
142Co
il Se
Sect
ion
Wei
g
Bag F
ilter /
LVF
HVF
Filter
BF / L
VFHV
F
4523
4523
4724
4724
5528
5528
5729
5729
6231
6231
6433
6433
6634
6634
7035
7035
7639
7639
8141
8141
8543
8543
8945
8945
9749
9749
104
5310
453
111
5611
156
115
5811
558
117
5911
759
122
6212
262
134
6813
468
148
7414
874
156
7815
678
Filte
r Sec
tion
ht (5
0mm
S
Doub
le
Mi
xing B
oxEc
onom
ized
Mixin
g Box
DBL
MXB
ECN
MXB
6838
6838
7141
7141
8249
8249
8652
8652
9257
9257
9569
9569
113
7111
371
121
7812
178
133
8913
389
142
9814
298
148
105
148
105
154
112
154
112
169
128
169
128
181
141
181
141
194
153
194
153
294
164
294
164
301
169
301
169
312
179
312
179
327
199
327
199
359
220
359
220
383
246
383
246
ing
Box S
ectio
n
it C
oil W
eig
timate
d weig
ht in
kg.
Mixin
g Box
MXB
Fa
n
Si
ze 160
3818
038
180
4120
041
200
4922
549
225
5225
052
250
5728
057
280
6931
569
315
7135
571
355
7840
078
400
8945
089
400
9845
098
450
131
500
131
500
140
560
140
560
157
630
157
560
185
630
185
630
202
710
202
630
214
710
214
710
250
800
250
710
263
800
263
800
286
900
286
800
315
900
315
900
347
1000
347
Mix i
Bas
e U
ni
16
Note:
Est
39G
AHU
Size
2634
2025
2125
2226
2230
2234
1418
1420
1621
1822
1825
0913
0914
1015
1117
1317
0608
0609
0711
0811
0912
ACS 50 50 53 53 63 63 65 65 70 70 73 73 75 75 81 81 88 88 93 93 98 98 103
103
112
112
120
120
129
129
134
134
136
136
141
141
157
157
175
175
183
183
Plen
um
Acce
ss
DIF
DISC
2544
2544
2646
2646
3156
3156
3260
3260
3467
3467
3680
3680
3782
3782
3990
3990
4310
543
105
4511
745
117
4715
847
158
9917
099
170
108
191
108
191
115
227
115
227
124
247
124
247
128
263
128
263
130
307
130
307
135
324
135
324
151
353
151
353
168
389
168
389
176
431
176
431
Diffu
ser
Sect
ion
Disc
harg
e Se
ctio
n wi
th
Damp
erHo
rizon
talVe
rtical
FCF
or B
CFFC
F or
BCF
5880
5880
6284
7384
8898
8898
9210
392
103
102
109
116
109
121
114
121
114
125
117
138
117
149
125
149
125
174
140
203
169
188
147
218
178
233
187
233
187
249
196
282
230
313
250
332
270
340
-36
0-
396
-41
7-
415
-43
7-
448
-50
0-
470
-52
3-
570
-62
0-
631
-68
7-
741
-77
1-
Fan
Sect
ion
Hot W
ater
(Hor
izonta
l)
HWHT
R
2526
2526
2627
2627
3132
3132
3233
3233
3435
3435
3638
3638
3739
3739
3941
3941
4345
4345
4547
4547
4749
4749
5052
5052
5456
5456
5861
5861
6265
6265
6467
6467
6568
6568
6871
6871
7679
7679
8488
8488
8892
8892
ectio
nHe
ater
Se
ctio
n
n W
eigh
t)
HEPA
Filte
rCo
oling
/Dua
l (H
orizo
ntal)
HEPA
CW
8049
8049
8452
8452
9861
9861
103
6310
363
109
6810
968
114
7111
471
117
7311
773
125
7812
578
140
8514
085
147
9014
790
155
9415
594
162
9916
299
176
108
176
108
189
115
189
115
206
124
206
124
213
128
213
128
216
130
216
130
225
135
225
135
240
151
240
151
265
168
265
168
280
176
280
176Co
il Se
NT
B S
ectio
n
Bag F
ilter /
LVF
HVF
Filter
BF / L
VFHV
F
5026
5026
5327
5327
6332
6332
6533
6533
7035
7035
7338
7338
7539
7539
8141
8141
8845
8845
9347
9347
9849
9849
103
5210
352
112
5611
256
120
6112
061
129
6512
965
134
6713
467
136
6813
668
141
7114
171
157
7915
779
175
8817
588
183
9218
392
Filte
r Sec
tion
ht (5
0mm
N
Doub
le
Mi
xing B
oxEc
onom
ized
Mixin
g Box
DBL
MXB
ECN
MXB
7544
7544
7846
7846
9156
9156
9560
9560
102
6710
267
106
8010
680
127
8212
782
136
9013
690
150
105
150
105
160
117
160
117
167
126
167
126
174
136
174
136
191
155
191
155
205
172
205
172
221
187
221
187
342
200
342
200
350
207
350
207
363
220
363
220
382
247
382
247
417
274
417
274
447
307
447
307
ng B
ox S
ectio
n
it C
oil W
eig
mated
weig
ht in
kg.
Mixi
ng B
ox
MXB
Fa
n
Si
ze 160
4418
044
180
4620
046
200
5622
556
225
6025
060
250
6728
067
280
8031
580
315
8235
582
355
9040
090
400
105
450
105
400
117
450
117
450
158
500
158
500
170
560
170
560
191
630
191
560
227
630
227
630
247
710
247
630
263
710
263
710
307
800
307
710
324
800
324
800
353
900
353
800
389
900
389
900
431
1000
431
Mixi n
Bas
e U
ni
17
Note:
Esti
m
39G
AHU
Size
2234
2634
1825
2025
2125
2226
2230
1317
1418
1420
1621
1822
0912
0913
0914
1015
1117
0608
0609
0711
0811
Fan Motor Weight
Table below shows the approximate fan motor weight.
Motor HP Motor kW Motor Shaft Diameter Approx Weight Frame NumberMotor HP Motor kW Motor Shaft Diameter(mm)
Approx. Weight(kg)
Frame Number
1 0.75 19 15 D80
1.5 1.1 24 20 D90S
2 1.5 24 22 D90L
3 / 4 2 2 / 3 0 28 30 D100L3 / 4 2.2 / 3.0 28 30 D100L
5 / 5.5 3.7 / 4.4 28 42 D112M
7.5 5.5 38 65 D132S
10 7.5 38 76 D132M
15 11.0 42 118 D160M
20 15.0 42 139 D160L
25 18.5 48 189 D180M
30 22.0 48 203 D180L
40 30.0 55 290 D200L
50 37 0 60 320 D225SC50 37.0 60 320 D225SC
60 45.0 60 355 D225MC
75 55.0 70 520 D2250SA
Notes:
• Motor weights based on 4-pole, 415/3Ø/50Hz induction type TEFC foot mounted motor.
• Motor is suitable for direct on-line / reduced voltage starting mechanism.
• Standard motor shall be per IEC standard IP55 enclosure with Class F insulation and B temperature rise complying with BS2757.
• Maximum ambient temperature 40°C.
• For derivation of motor kW from fan BkW use.
Motor kW = Fan BkW x A, where A = 1.20 if BkW < 10kWA = 1.15 if BkW > 10kW
• Please refer to your nearest Carrier representatives for special motor voltages or application.
18
h, L
m)
Max
imum
Bk
W 37 45 450
551
559
751
75 2 2.5 3 3 4 5.5 5.5 7.5 7.5 11 11 157
18.5 7.5 11 11 15 15 18.5
18.5 22 22
725
025
930
037
h, W
m)
Heig
ht, H
(mm
)Le
ngth
(mm
891
874
85
1030
839
0111
5794
098
1303
1050
0714
6811
8130
1648
1319
6718
1014
5168
336
294
0637
030
638
415
348
7246
038
320
518
432
6457
848
032
654
548
8673
661
248
827
681
891
875
04
1030
844
0011
5794
598
1302
1057
7246
038
320
518
432
6457
848
032
654
548
8673
661
248
827
681
891
875
04
1030
844
0011
5794
598
1302
1057
0614
6811
8030
1648
1319
6618
1014
50
n M
ax
PMSh
aft D
ia
(mm
)W
idth
(mm
300
50 h7
7120
050
h781
000
50 h7
9090
060
h799
800
60 h7
110
700
60 h7
123
650
60 h7
136
700
20g6
2630
020
g630
900
20g6
3370
020
g637
400
25g6
4210
025
g646
800
30g6
5 360
030
g658
400
35g6
6420
035
g671
100
40g6
8190
045
g690
800
50g6
9900
025
g637
700
30g6
4220
030
g646
000
35g6
5380
035
g658
600
40g6
6430
045
g671
200
45g6
8100
050
g690
900
55g6
9975
055
g611
065
060
g612
360
070
g613
6
ved
Mod
elW
eigh
t
(Kg)
Fan R
0 K2
105
130 K
215
012
0 K2
180
100 K
222
59
0 K2
278
80 K
232
07
00 K
236
06
M 18
09.5
37M
200
10.5
33M
225
1229
M 25
015
27M
280
2024
M 31
524
2M
355
3218
M 40
041
16M
450
5114
M 50
074
12M
560
931
M 63
010
49
M 71
012
78
M 25
021
30M
280
2727
M 31
530
22M
355
4520
M 40
055
18M
450
6116
M 50
081
13M
560
110
12M
630
140
1 0M
710
192
9M
800
240
7M
900
293
6M
1000
340
6
Forw
ard
Cur
vM
axim
um
BkW
Fan
M
3AD
H 50
3AD
H 56
4AD
H 63
4AD
H 71
4AD
H 80
5.5AD
H 90
5.5AD
H 10
7.5FD
A C M
7.5FD
A CM
11FD
A CM
11FD
A CM
15FD
A CM
15FD
A CM
18.5
FDA
CM4
FDA
CM4
FDA
CM7.5
FDA
CM11
FDA
CM11
FDA
CM15
FDA
CM15
FDA
TM15
FDA
TM15
FDA
TM18
.5FD
A TM
18.5
FDA
TM22
FDA
TM22
FDA
TM30
FDA
TM37
FDA
TM18
.5FD
A TM
22FD
A TM
22FD
A TM
30FD
A TM
30 30 30 37 37 45
FHe
ight
, H(m
m)
Leng
th, L
(mm
)M
300
259
336
294
370
306
415
345
461
381
518
429
578
480
655
544
736
609
827
679
918
748
1030
839
1157
940
1303
1050
370
306
415
345
461
381
518
429
578
480
655
544
736
613
827
679
918
748
1030
839
1157
940
1303
1050
1468
1181
1648
1319
1810
1451
578
480
655
544
736
613
827
679
918
748
1030
839
1157
940
1303
1050
1468
1181
1648
1319
atio
n
Sh
aft D
ia
(mm
)W
idth
, W(m
m)
20 h7
245
20 h7
269
20 h7
306
20 h7
338
20 h7
372
25 h7
421
25 h7
464
30 h7
533
30 h7
587
35 h7
649
35 h7
718
40 h7
815
40 h7
901
50 h7
998
20 h7
306
20 h7
338
25 h7
372
30 h7
421
30 h7
464
35 h7
531
35 h7
587
40 h7
649
40 h7
718
50 h7
815
50 h7
901
50 h7
998
50 h7
1107
60 h7
1230
60 h7
1367
30 h7
464
35 h7
531
35 h7
587
40 h7
649
40 h7
718
50 h7
815
50 h7
901
60 h7
998
60 h7
1107
60 h7
1230
wer
Spe
cific
Wei
ght
(K
g)Fa
n M
ax
RPM
6.642
007.8
4000
9.138
0010
.734
0013
2800
1825
0022
2100
2918
0038
1600
5014
0065
1200
8611
0010
690
013
575
012
.638
0014
.534
0018
3000
2426
0029
2300
4120
0052
1800
6615
0085
1300
134
1200
170
1000
201
900
249
800
306
700
333
650
3023
0042
2000
5318
0067
1500
8613
0014
212
0017
510
0020
890
026
180
031
670
0
Fan
Blo
w
19
Fan
Mod
el
ADH
160 R
ADH
180 R
ADH
200 R
ADH
225 R
ADH
250 R
ADH
280 R
ADH
315 R
ADH
355 R
ADH
400 R
ADH
450 R
ADH
500 R
ADH
560 R
ADH
630 R
ADH
710 R
ADH
200 K
ADH
225 K
ADH
250 K
ADH
280 K
ADH
315 K
ADH
355 K
ADH
400 K
ADH
450 K
ADH
500 K
ADH
560 K
ADH
630 K
ADH
710 K
ADH
800 K
ADH
900 K
ADH
1000
KAD
H 31
5 K1
ADH
355 K
1AD
H 40
0 K1
ADH
450 K
1AD
H 50
0 K1
ADH
560 K
1AD
H 63
0 K1
ADH
710 K
1AD
H 80
0 K1
ADH
900 K
1
ximum
Bk
W 2 2.2
2.5 3 4 5 6 8 10 12 14 18 8 11 14 18 20 25 30 40 22 30 35 50 60 80 7.5
7.5
7.5
7.5 30 30 30 37 37 55 55 75 75
Heig
ht, H
(mm
)Le
ngth
, L(m
m)
Ma B
370
306
415
348
460
383
518
432
578
480
654
548
736
612
827
681
918
750
1030
844
1157
945
1302
1057
578
480
654
548
736
612
827
681
918
750
1030
844
1157
945
1302
1057
1468
1180
1648
1319
1810
1450
1468
1180
1648
1319
1810
1450
433
366
532
449
596
502
669
562
750
632
840
708
930
780
1046
884
1173
980
1324
1104
1522
1244
1706
1386
1869
1510
x
Shaf
t Dia
(m
m)
Wid
th, W
(mm
)20
g630
620
g633
820
g637
225
g642
025
g646
430
g653
230
g658
635
g664
835
g671
840
g681
445
g690
050
g699
830
g646
435
g653
235
g658
640
g664
845
g671
845
g681
450
g690
055
g699
855
g611
0660
g612
3070
g613
6665
g611
0670
g612
3080
g613
66
20k6
350
25k6
423
25k6
465
25k6
515
30k6
580
30k6
644
30k6
713
40k6
789
40k6
876
50k6
973
50k6
1092
60k6
1225
60k6
1362
ved
del
Wei
ght
(K
g)Fa
n M
a xRP
M00
1352
0025
1645
0050
2040
0080
2435
0015
2731
0055
4127
0000
4532
0050
6229
0000
8125
0060
110
2200
3014
120
0010
199
1800
1540
4100
5553
3500
0067
3200
5089
2900
0011
825
0060
158
2200
3019
720
0010
251
1800
0029
912
0000
368
1050
000
474
1000
0032
316
0000
397
1400
000
512
1300
L 2515
6640
8023
5235
527
4418
5536
3200
0061
3600
5073
3360
0094
2920
6012
524
0030
149
1880
020
120
0000
G125
014
7000
G135
814
3000
041
611
40
Bac
kwar
d C
urv
axim
um
BkW
Fan
Mod
2.2
BDB
CM 2
03
BDB
CM 2
24
BDB
CM 2
54
BDB
CM 2
85.
5BD
B CM
35.
5BD
B CM
35
7.5
BDB
CM 4
07.
5BD
B CM
45
11BD
B CM
50
11BD
B CM
56
15BD
B CM
63
15BD
B CM
715
BDB
TM 31
3BD
B TM
354
BDB
TM 40
5.5
BDB
TM 45
7.5
BDB
TM 50
7.5
BDB
TM 56
11BD
B TM
6315
BDB
TM 71
15BD
B TM
8015
BDB
TM 90
18.5
BDB
TM 10
18.5
BDB
XM 80
22BD
B XM
9022
BDB
XM 10
30 37A
IRFO
IL11
RZR
12-2
215
RZR
12-2
822
RZR
12-3
130
RZR
12-3
530
RZR
15-4
030
RZR
15-4
530
RZR
15-5
037
RZR
15-5
637
RZR
15-6
345
RZR
15-7
137
RZR
15-8
037
RZR
15-9
045
RZR
15-1
055 55 75 75
BHe
ight
, H(m
m)
Leng
th, L
(mm
)M
336
294
370
306
415
345
461
381
518
429
578
480
655
544
736
609
827
679
918
748
1030
839
1157
940
1303
1050
370
306
415
345
461
381
518
429
578
480
655
544
736
613
827
679
918
748
1030
839
1157
940
1303
1050
1468
1181
1648
1319
1810
1451
578
480
655
544
736
613
827
679
918
748
1030
839
1157
940
1303
1050
1468
1181
1648
1319
918
748
1030
839
1157
940
1303
1050
1468
1181
1648
1319
1810
1451
atio
n
ax
Shaf
t Dia
(m
m)
Wid
th, W
(mm
)20
h726
920
h730
620
h733
820
h737
225
h742
125
h746
430
h753
330
h758
735
h764
935
h771
840
h781
540
h790
150
h799
820
h730
620
h733
825
h737
230
h742
130
h746
435
h753
135
h758
740
h764
940
h771
850
h781
550
h790
150
h799
850
h711
0760
h712
3060
h713
6730
h746
435
h753
135
h758
740
h764
940
h771
850
h781
550
h790
160
h799
860
h711
0760
h712
3050
h771
850
h781
550
h790
160
h799
860
h711
0760
h712
3060
h713
67
wer
Spe
cific
odel
Wei
ght
(K
g)Fa
n M
aRP
M R
7.168
00 R
8.560
00 R
9.958
00 R
15.7
4600
R21
4000
R25
3500
R34
3300
R42
2700
R57
2500
R70
2100
R92
1950
R11
916
00 R
165
1300
K11
.868
00 K
13.6
6000
K21
5400
K28
4700
K32
4100
K46
3800
K57
3100
K73
2800
K90
2350
K14
121
00 K
173
1700
K22
015
00 K
270
1200
K34
311
000 K
415
1000
K1
3445
00 K
147
4000
K1
5835
00 K
175
3200
K1
9226
50 K
114
824
00 K
118
020
0 K
124
017
00 K
129
714
00 K
135
512
50 K
290
2350
K2
141
2100
K2
173
1700
K2
220
1500
K2
270
1200
K2
343
1100
0 K2
415
1000
Fan
Blo
w
20
Fan
Mo
RDH
180
RDH
200
RDH
225
RDH
250
RDH
280
RDH
315
RDH
355
RDH
400
RDH
450
RDH
500
RDH
560
RDH
630
RDH
710
RDH
200
RDH
225
RDH
250
RDH
280
RDH
315
RDH
355
RDH
400
RDH
450
RDH
500
RDH
560
RDH
630
RDH
710
RDH
800
RDH
900
RDH
100
RDH
315
RDH
355
RDH
400
RDH
450
RDH
500
RDH
560
RDH
630
RDH
710
RDH
800
RDH
900
RDH
500
RDH
560
RDH
630
RDH
710
RDH
800
RDH
900
RDH
100
Filter Type, Dimension and Quantity
0608 0609 0711 0811 0912 0913 0914 1015 1117 1317 1418 1420 1621 1822 1825 2025 2125 2226 2230 2234 2634H289 X W595 3GA509 904 2 2 2 2 3 2 4 4 4 8 3
DIMENSION (mm)
39G UNIT SIZETYPE PART NO.
H289 X W595 3GA509-904 - - 2 2 - - - 2 - 2 - - 3 2 4 - - 4 4 8 3H391 X W495 3GA509-943 - 2 - - 2 2 - - 8 - - - - - - - - - - - -H391 X W595 3GA509-944 1 - 1 1 2 2 4 - - - 2 - - 3 - - - - 3 - -H595 X W595 3GA509-902 - - - - - - - 2 - 4 4 6 6 6 8 12 12 12 12 15 20H289 X W595 3GA509-920 - - 2 2 - - - 2 - 2 - - 3 2 4 - - 4 4 8 3H391 X W495 3GA509-951 - 2 - - 2 2 - - 8 - - - - - - - - - - - -H391 X W595 3GA509-952 1 - 1 1 2 2 4 - - - 2 - - 3 - - - - 3 - -H595 X W595 3GA509-918 - - - - - - - 2 - 4 4 6 6 6 8 12 12 12 12 15 20
HEPA
filte
r EU
13 P
/brd
HEPA
filte
r EU
13 A
lum
H289 X W595 3GA509-925 - - 2 2 - - - 2 - 2 - - 3 2 4 - - 4 4 8 3H391 X W495 3GA509-953 - 2 - - 2 2 - - 8 - - - - - - - - - - - -H391 X W595 3GA509-954 1 - 1 1 2 2 4 - - - 2 - - 3 - - - - 3 - -H595 X W595 3GA509-923 - - - - - - - 2 - 4 4 6 6 6 8 12 12 12 12 15 20H289 X W595 3GA509-941 - - 2 2 - - - 2 - 2 - - 3 2 4 - - 4 4 8 3H391 X W495 3GA509-961 - 2 - - 2 2 - - 8 - - - - - - - - - - - -H391 X W595 3GA509-962 1 - 1 1 2 2 4 - - - 2 - - 3 - - - - 3 - -H595 X W595 3GA509-939 - - - - - - - 2 - 4 4 6 6 6 8 12 12 12 12 15 20
HEPA
filte
r EU
14 A
lum
HEPA
filte
r EU
14 P
/brd
H289 X W595 39GA509-373 - - - - - - - 2 - - - - 3 - 4 - - 4 4 5 -H391 X W495 39GA509-375 - - - - 2 2 - - - - - - - - - - - - - - -H391 X W595 39GA509-376 1 - - - 2 2 4 - - - - - - 3 - - - - - - -H595 X W595 39GA509-630 - 2 - - - - - - 8 - - - - - - - - - - - -H595 X W289 39GA509-631 - - 2 2 - - - - - 2 - - - 2 - - - - - 3 3H595 X W391 39GA509-632 - - 1 1 - - - - - - 2 - - - - - - - 3 - -H595 X W595 39GA509-378 - - - - - - - 2 - 4 4 6 6 6 8 12 12 12 12 15 20H289 X W595 39GA509-230 - - - - - - - 2 - - - - 3 - 4 - - 4 4 5 -
1" B
ag F
ilter
EU5
H391 X W495 39GA509-232 - - - - 2 2 - - - - - - - - - - - - - - -H391 X W595 39GA509-233 1 - - - 2 2 4 - - - - - - 3 - - - - - - -H595 X W595 39GA509-621 - 2 - - - - - - 8 - - - - - - - - - - - -H595 X W289 39GA509-622 - - 2 2 - - - - - 2 - - - 2 - - - - - 3 3H595 X W391 39GA509-623 - - 1 1 - - - - - - 2 - - - - - - - 3 - -H595 X W595 39GA509-235 - - - - - - - 2 - 4 4 6 6 6 8 12 12 12 12 15 20H289 X W595 39GA509-208 - - - - - - - 2 - - - - 3 - 4 - - 4 4 5 -H391 X W495 39GA509-210 - - - - 2 2 - - - - - - - - - - - - - - -
1" B
ag F
ilter
EU
6
H391 X W495 39GA509 210 2 2H391 X W595 39GA509-211 1 - - - 2 2 4 - - - - - - 3 - - - - - - -H595 X W595 39GA509-618 - 2 - - - - - - 8 - - - - - - - - - - - -H595 X W289 39GA509-619 - - 2 2 - - - - - 2 - - - 2 - - - - - 3 3H595 X W391 39GA509-620 - - 1 1 - - - - - - 2 - - - - - - - 3 - -H595 X W595 39GA509-213 - - - - - - - 2 - 4 4 6 6 6 8 12 12 12 12 15 20H289 X W595 39GA509-240 - - - - - - - 2 - - - - 3 - 4 - - 4 4 5 -H391 X W495 39GA509-242 - - - - 2 2 - - - - - - - - - - - - - - -H391 X W595 39GA509 243 1 2 2 4 3
1" B
ag F
ilter
EU
7er
H391 X W595 39GA509-243 1 - - - 2 2 4 - - - - - - 3 - - - - - - -H595 X W595 39GA509-624 - 2 - - - - - - 8 - - - - - - - - - - - -H595 X W289 39GA509-625 - - 2 2 - - - - - 2 - - - 2 - - - - - 3 3H595 X W391 39GA509-626 - - 1 1 - - - - - - 2 - - - - - - - 3 - -H595 X W595 39GA509-245 - - - - - - - 2 - 4 4 6 6 6 8 12 12 12 12 15 20H289 X W595 39GA509-270 - - - - - - - 2 - - - - 3 - 4 - - 4 4 5 -H391 X W495 39GA509-615 - - - - 2 2 - - - - - - - - - - - - - - -H391 X W595 39GA509-271 1 - - - 2 2 4 - - - - - - 3 - - - - - - -
1" B
ag F
iltEU
8 F
ilter
9
H595 X W595 39GA509-627 - 2 - - - - - - 8 - - - - - - - - - - - -H595 X W289 39GA509-628 - - 2 2 - - - - - 2 - - - 2 - - - - - 3 3H595 X W391 39GA509-629 - - 1 1 - - - - - - 2 - - - - - - - 3 - -H595 X W595 39GA509-272 - - - - - - - 2 - 4 4 6 6 6 8 12 12 12 12 15 20H289 X W595 39GA509-038 - - 2 2 - - - 2 - 2 - - 3 2 4 - - 4 4 8 3H391 X W495 39GA509-040 - 2 - - 2 2 - - 8 - - - - - - - - - - - -H391 X W595 39GA509-041 1 - 1 1 2 2 4 - - - 2 - - 3 - - - - 3 - -H595 X W595 39GA509-043 - - - - - - - 2 - 4 4 6 6 6 8 12 12 12 12 15 202"
HVF
filte
r G0
31"
Bag
EU
21
H289 X W595 39GA509-026 - - 2 2 - - - 2 - 2 - - 3 2 4 - - 4 4 8 3H391 X W495 39GA509-028 - 2 - - 2 2 - - 8 - - - - - - - - - - - -H391 X W595 39GA509-029 1 - 1 1 2 2 4 - - - 2 - - 3 - - - - 3 - -H595 X W595 39GA509-031 - - - - - - - 2 - 4 4 6 6 6 8 12 12 12 12 15 202"
HVF
filte
r G0
4
810
1214
627
2829
133
3537
144
4749
053
5759
862
6570
266
7174
671
7580
187
9398
312
012
713
5
3214
115
016
0
4615
616
517
6
5817
018
119
3
8920
321
623
0
2824
626
328
1
5327
429
431
5
8931
133
335
5
0733
035
537
8
2735
237
840
3
7040
042
945
9
344
748
151
5
8352
356
460
4
nsio
n6
810
1214
8
2122
2224
26
2627
2829
31
3336
3739
41
4042
4447
50
4749
5153
58
4952
5458
62
5255
5861
66
363
6671
7481
590
9499
104
11
610
511
011
712
313
711
412
112
813
514
912
413
113
914
715
814
615
416
417
418
117
518
619
821
122
519
320
622
023
425
322
423
825
326
828
123
725
226
928
430
425
126
928
530
232
628
230
232
234
137
831
333
635
838
141
536
339
141
744
548
Dire
ct E
xpan
414
810
1214
3130
3132
35
4037
3941
43
5450
5355
59
6560
6468
72
7770
7580
85
8375
8186
92
9081
8693
98
110
9910
711
512
3
150
136
146
156
165
178
160
172
184
196
197
176
191
204
217
216
193
208
224
239
259
230
250
269
288
316
281
305
328
351
355
314
341
369
395
399
355
383
413
443
424
377
409
439
471
454
402
436
470
504
517
457
497
536
576
581
513
558
603
648
685
602
656
710
765
812
148
1012
2829
2829
30
3537
3537
38
4749
4649
51
5759
5459
62
6570
6469
73
7174
6973
79
7580
7379
84
9398
9097
104
127
135
124
132
141
150
160
147
157
168
165
176
161
173
185
181
193
175
190
203
216
230
209
226
242
263
281
255
275
295
294
315
284
307
332
333
355
322
347
373
355
378
343
370
396
378
403
365
394
424
429
459
414
448
483
481
515
462
502
542
564
604
543
590
637
oil W
eigh
t (kg
)
Wat
er7
1012
148
10
2526
2726
27
3031
3331
33
4041
4341
44
4850
5250
53
5559
6258
62
5962
6662
66
6366
7166
71
7682
8681
87
107
114
119
113
120
126
134
141
132
141
138
147
156
146
156
150
160
170
158
170
179
191
202
189
203
216
231
246
228
246
240
257
274
253
274
274
293
311
289
311
292
312
330
307
330
311
332
352
327
352
350
376
400
370
400
391
420
448
413
447
457
491
525
483
523
Estim
ated
Dry
C
Chill
ed
56
ion.
f row
s x 7.
0kg/s
q.m.
ove d
ata (k
g) x
3.3.
810
1214
8
122
2224
242
627
2829
293
336
3739
384
042
4447
444
749
5153
525
952
5458
555
255
5861
596
366
7174
727
094
9910
410
11
0511
011
712
311
81
1412
112
813
513
01
2413
113
914
714
11
4615
416
417
416
71
7518
619
821
120
22
9320
622
023
422
32
2423
825
326
825
72
3725
226
928
427
22
5126
928
530
228
93
8230
232
234
132
63
1333
635
838
136
23
6339
141
744
542
34
4
alumi
nium
plated
fin co
nstru
ctius
e –Fa
ce ar
ea (s
q.m) x
no. o
fte
fin co
nstru
ction
, use
the a
bo
810
1214
8
1313
1414
2
1616
1717
2
2021
2122
3
2425
2627
4
2728
3031
4
2930
3133
4
3032
3335
5
3638
4042
6
5659
6164
9
6669
7275
1 0
7275
7982
11
7780
8488
12
490
9599
104
14
610
811
412
012
617
711
712
413
013
719
613
414
114
915
622
614
215
015
816
623
615
015
916
717
625
516
617
518
519
528
518
119
220
421
531
221
122
523
825
236
t Wat
er2
ght
2.7mm
OD
copp
er tu
bes w
ith a
weigh
t of w
ater c
onten
t (kg
), u
coil w
eight
(kg) f
or co
pper
plat
810
1214
Are
a m
³) 2213
1314
14
3016
1617
17
4520
2121
22
5624
2526
27
6827
2830
31
7529
3031
33
8230
3233
35
0636
3840
42
3756
5961
64
6566
6972
75
8672
7579
82
1077
8084
88
5790
9599
104
2010
811
412
012
6
7011
712
413
013
7
9813
414
114
915
6
2714
215
015
816
6
6115
015
916
717
6
3916
617
518
519
5
1818
119
220
421
5
3821
122
523
825
2
of C
oilHo
tof
Row
1ns
/Inch
Coi
l Wei
g
Note:
1.Al
l coil
s are
of 1 2
2.To
estim
ate th
e w3.
To es
timate
dry c
22
39G
Unit
Size
Face
(m06
080.2
0609
0.3
0711
0.4
0811
0.5
0912
0.6
0913
0.7
0914
0.8
1015
1.0
1117
1.3
1317
1.6
1418
1.8
1420
2.1
1621
2.5
1822
3.2
1825
3.7
2025
3.9
2125
4.2
2226
4.6
2230
5.3
2234
6.1
2634
7.3
Type
No
o Fin
Guide Specifications
GENERAL
1 F i h d i t ll t l i h dli it f th t i d it h th i t h d l1. Furnish and install central air handling units of the type, size and capacity shown on the equipment schedule.
2. Equipment schedules are based on Carrier 39G C-series. The design of the air handling unit is based on the use ofmodular panels and extruded aluminum perimeter frames with composite corner piece.
3. Units shall be horizontal/vertical draw-through type or horizontal blow-through type as shown on the certified drawings.In general, the unit shall consists of:
• Mixing box section• Filter section• Coil section• Access or Plenum section• Fan section
CASING
1. Unit shall be constructed of a complete frame with easily removable panels. Removal of any panel shall not affect thestructural integrity of the unitstructural integrity of the unit.
2. All 39G unit sections shall be supplied with 14-gage G90 galvanized (100mm height) steel structural unit base. Holesare provided for rigging purposes and are positioned to suit optimum hoisting stability.
3. Casing panels shall be solid double wall of 50mm (or 25mm) nominal construction with injection foam insulation inbetween. The outer panel shall be painted 0.5mm thick galvanized steel (sky blue color – RAL 5012) and inner panelshall be unpainted 0.5mm thick galvanized steel. The coating shall meet or exceed ASTM B117 Standard for 500-hoursalt spray test.
4. The casing panels shall be insulated with injected insitu CFC-Free Polyurethane insulation foam with thermalconductivity of 0.020W/mK and a density of 40kg/m3 in between. The insulation shall be sandwiched andencapsulated between the inner and outer panel. Exposed insulation is not acceptable.
5. Casing panels shall have no exterior exposed raw edges that could lead to rust formation. All casing corners shall beradiused or chamfered.
6. All panels shall seal against a full casing perimeter with nitrile gasket to ensure a tight seal.
7. Mixing boxes shall be solid double wall, insulated and complete with necessary air dampers for return and fresh airmixing. Accessibility options shall be hinged access door on hand side, hinged access doors on both sides, orremovable access doors.a. Viewports shall be available as a factory-installed option on the door of this section.b. Marine lights shall be available as a factory-installed option.
8. Filter section shall be solid double wall, insulated and complete with necessary tracks for filters installation.Accessibility options shall be hinged access door on hand side, hinged access doors on both sides, or removableaccess doorsaccess doors.a. Pressure gages or switches shall be available as a factory-installed optionb. Filter sections shall be designed and constructed to house one of the following filter types:
• Face/side loading 25mm or 50mm pre-filters• Side loading 50mm angle filters• Face loading 529mm bag filters with 50mm pre-filters • Side loading 529mm bag filters • Face loading HEPA filters
9. Coil sections shall have solid double wall and insulated casing. Accessibility options shall be hinged access door or removable access doors (applicable for vertical type).
10. Access and plenum sections shall have solid double wall and insulated casing. Accessibility options shall be hinged access door on hand side, hinged access doors on both sides or removable access doors.a. Viewports shall be available as a factory-installed option on the door of this section.b. Marine lights shall be available as a factory-installed option.
23
Guide Specifications
CASING (cont’)
11 F ti h ll h lid d bl ll d i l t d i A ibilit ti h ll b hi d d11. Fan section shall have solid double wall and insulated casing. Accessibility options shall be hinged access door onhand side, hinged access doors on both sides or removable access doors.a. Viewports shall be available as a factory-installed option on the door(s) of this section.b. IP44 marine lights shall be available as a factory-installed option.c. Blow-thru sections shall have a diffuser plate as an integral part of the fan section if used immediately downstream
of the fan section.
FANS
A. General1. Forward-curved fans shall have one double width double inlet (DWDI) fan wheel and scroll. They shall be
constructed of galvanized steel. They shall be designed for continuous operation at the maximum rated fan speedand motor horsepower. Completed fan assembly shall be statically and dynamically balanced in accordance toISO 1940.
2 B k d i li d f h ll h d bl idth d bl i l t (DWDI) f h l d ll Th f bl2. Backward inclined fans shall have one double width double inlet (DWDI) fan wheel and scroll. The fan assemblyshall be cleaned, primed and painted with alchidic-melamminic paint. They shall be designed for continuousoperation at the maximum rated fan speed and motor horse-power. Completed fan assembly shall be staticallyand dynamically balanced in accordance to ISO 1940.
3. Airfoil fan sections shall have one double width double (DWDI) airfoil fan wheel and scroll. The fan assembly shallbe cleaned, primed and painted with epoxy paint. Completed fan assembly shall be statically and dynamicallybalanced in accordance to ISO 1940.
f f f4. Fan wheels shall be keyed to the shaft and shall be designed for continuous operation at maximum rated fanspeed and motor horsepower. Fan wheels and shafts shall be selected with a maximum operating speed 25%below the first critical.
5. Fan shafts shall be solid carbon steel, turned, ground, polished and coated with protective paint. Hollow shafts arenot acceptable.
B. Performance RatingsAir performance ratings of the fans shall be rated and certified in accordance with AMCA 210-99.
C. Sound RatingsManufacturer shall publish first through eighth octave sound power for fan inlet and fan discharge.
D. MountingFan scroll wheel shaft bearings drives and motor shall be mounted on a common base assembly The baseFan scroll, wheel, shaft, bearings, drives, and motor shall be mounted on a common base assembly. The baseassembly shall be isolated from the outer casing with factory-installed 2” spring isolators and flexible canvasconnection.
FAN MOTOR
1. The motor size, type, speed and its electrical characteristics shall be as per the equipment schedule.
2. Fan motors shall be mounted within the fan section casing on slide rails to aid in belt tightening.
3. Fan motors shall be IP55, high efficiency (EFF2), totally enclosed fan cooled (TEFC) with class F insulation. Optionalpremium efficiency (EFF1) motors shall be available, if specified.
4. The motor shall be suitable for operation at ambient temperature of 40oC (max) with ±10% voltage utilization range anda 1.15 minimum service factor.
24
Guide Specifications
DRIVES
1 Th d i bl h ll i t f V b lt d t f f d t ll1. The drive assembly shall consist of V-belts and a set of fan and motor pulley.
2. The V-belts shall be SPZ, SPA, SPB or SPC grades, oil and heat resistance and having anti static characteristic whichprevent electrical discharge.
3. The motor and fan pulley dimension shall conform to ISO 4183 and shall be using taper-lock bush with set screws foreasy and quick assemble and disassemble process. The pulley shall be phosphated and coated with a layer of rustprohibitive paint for protection against corrosion.
4 Drive shall be designed for a minimum 1 5 service factor as standard with a 2 0 service factor options Drives shall be4. Drive shall be designed for a minimum 1.5 service factor as standard with a 2.0 service factor options. Drives shall befixed-pitch with variable pitch as an option. All drives shall be factory mounted, with sheaves aligned.
COILS
A. All cooling, heating and refrigerant (DX) coils shall be provided to meet the scheduled performance. All coilperformances shall be rated in accordance with ARI Standard 410 and shall be tested at 400 psig air pressure whilesubmerged under water.g
B. General Fabrication1. All water and refrigerant coils shall have minimum 12.7mm (1/2-in.) OD copper tubes mechanically expanded into
fins to ensure high thermal performance.
2. Aluminum fin type shall be with belled collars. Optional copper fins or fins with protective coatings shall be supplied,if specified.
3. Aluminum-finned coils shall be supplied with die formed casing and galvanized steel tube sheet. Optional stainlesssteel or aluminum tube sheet shall be available if specified. Copper-finned coils shall be supplied with stainlesssteel casing and tube sheets.
4. Moisture eliminator shall be provided if specified on the equipment schedule. The moisture eliminator material shallbe mesh aluminum type or PVC type as specified.
C. Cooling and Heating Coils1. Headers shall be constructed of steel with MPT connections. Headers shall have drain and vent connections
accessible from the exterior of the unit. Optional non-ferrous headers with sweat connection shall be supplied ifspecified.
2. Coils shall be drainable, with non-trapping circuits and without turbulence promoting devices. Coils will be suitablefor a design working pressure of 300 psig at 93oC (cooling coils) or 175 psig at 205oC (heating coils).
3 Coil shall be designed for counter flow arrangements3. Coil shall be designed for counter flow arrangements.
D. Refrigerant (DX) Coils
1. Headers shall be constructed of copper with brazed joints.
2. Standard circuiting selections include optional single distributor arrangement (for 39G0608 – 39G0813) and dualdistributor arrangement for most sizes for face split or intertwined row split as specified. Brass nozzles anddistributors are factory supplied to ensure uniform flow. Expansion valves shall be provided if specified.
3. Coil shall be designed for counter flow arrangements.
25
Guide Specifications
E. Drain Pans1. Drain pans shall be single wall,1.0mm thick galvanized (and powder painted) or SS304 stainless steel construction
as specified. The drain pan depth shall be 40mm with 500mm width and insulated with 3mm PE closed cellinsulation underneath to prevent condensation.
2. The pan shall be sloped toward the drain fitting to ensure positive condensate drainage and shall extenddownstream of the coil to provide sufficient amount of space to contain moisture carry-over. Drain pan shall allowno standing water.
3. Drain pan shall have a recessed bottom drain design with integral FPT elbow (43mm OD) for side discharge andtrapping. One drain outlet shall be supplied for each cooling coil section unless otherwise indicated.pp g pp g
4. Where 2 or more coils are stacked in a coil bank, intermediate drain pans shall be provided and the condensateshall be piped to the bottom drain pan. The bottom coil shall not serve as a drain path for the upper coil.
5. The coil shall not sit in the drain pan and shall be removable via a coil track.
ELECTRIC HEATERS
1. Electric heater capacity and steps shall be as indicated on the equipment schedule.
2. The electric heater element shall be constructed from 80/20 nickel chrome resistance wire which is connected toterminal pins and centered in SS304 stainless steel sheath tubes by compressed magnesium oxides.
3. The manufacturer shall furnish a control box containing contactor, thermostat and circuit breaker. Heater control boxshall be mounted on the designated hand side of the unit.
FILTER SECTIONS
1. Provide the type and efficiency of the filters as per the equipment schedule.
2. High velocity filter sections shall accept 25mm or 50mm (G3 or G4) washable or throw-away filters.
3. Angle filter sections shall accept 50mm (G3) washable filters of standard flat filter sizes, arranged in a horizontal Vformation.
4. Bag filter sections shall be capable of accepting (F5 - F9) bag filters with length up to 529mm with 22mm header.
5. Blow-thru HEPA filter sections shall contain a face loading filter frame and be capable of accepting standard size300mm deep HEPA filters (H13-H14).
6. Optional Magnehelic filter gages complete with necessary tubing to measure the pressure drop across the filters shallbe provided if specified.
MXB DAMPERS
1. Provide factory installed opposed acting dampers as per the approved drawings.
2. Damper frame shall be made of extruded and anodized aluminum. Damper blades shall also be extruded andanodized aluminum airfoil shape to withstand high velocity and static pressure. Dampers shall be provided with flexiblesynthetic blade edge seals for low leakage application.
3 Damper shall be sectionalized to limit blade length to be less than 1800mm in order to prevent excessive blade3. Damper shall be sectionalized to limit blade length to be less than 1800mm in order to prevent excessive bladewarping. Outdoor air and return air damper size shall be of the same area for equal air mixing.
26
Manufacturer reserves the right to discontinue, or change at anytime, specifications or designs without notice and without incurring obligations.39GC-C12-1PD
Carrier International Sdn Bhd, Malaysia