Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Name of the
Bidder/
Bidding Firm /
Company :
NUMBER # TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
Sl.
No.
Item Description Quantity Units Estimated Rate
in
Rs. P
TOTAL AMOUNT With
Taxes in
Rs. P
TOTAL AMOUNT
In Words
1 2 3 4 5 6 7
1 Name of work : - Extension and Covering of Threshing
Floor and Construction of 8 Watch Huts (Under
RKVY) at MAF Ummedganj Kota1.01 Earth work in excavation in foundation trenches
or drains including dressing of sides and rammingof bottoms, lift upto 1.5 Mtr. including taking outthe excavated soil and depositing and refilling ofjhiri with watering and ramming and disposal ofsurplus excavated soil as directed within a lead of50 Mtr.
95.40 Cum 152.00 14500.80 INR Fourteen Thousand Five Hundred and Paise Eighty Only
1.02 Supplying and filling 6 mm nominal size crusherbroken stone aggregate including consolidationand watering complete including all lead & lift
14.94 Cum 813.70 12156.68 INR Twelve Thousand One Hundred & Fifty Six and Paise Sixty Eight Only
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are
allowed to enter the Bidder Name and Values only )
Percentage BoQ
Tender Inviting Authority: ESTATE OFFICER, AGRICULTURE UNIVERSITY, KOTA
Name of Work: Extension and Covering of Threshing Floor and Construction of 8 Watch Huts (Under RKVY) at MAF Ummedganj Kota
Contract No:EO/NIT No. 15-1/2018-19
Validate Print Help
1.03 Providing and laying R.R. stone kharanja incement mortar 1 : 6 in one course.23 Cm. thick.
39.79 Cum 271.00 10783.09 INR Ten Thousand Seven Hundred & Eighty Three and Paise Nine Only
1.04 Providing and laying in position cement concreteincluding curing, compaction etc. complete inspecified grade excluding the cost of centeringand shuttering - All work up to plinth level. 1 : 4 :8 (1 cement : 4 coarse sand : 8 graded stoneaggregate 40 mm nominal size).
38.76 Cum 2497.00 96783.72 INR Ninety Six Thousand Seven Hundred & Eighty Three and Paise Seventy Two Only
1.05 Providing and laying in position specified grade ofreinforced cement concrete including curing,compaction, finishing with rendering in cementsand mortar 1 : 3 (1 cement : 3 coarse sand) andmaking good the joints excluding the cost ofcentering, shuttering and reinforcement - Allwork up to plinth level : 1 : 1.5 : 3 (1 cement : 1.5coarse sand : 3 graded stone aggregate 20 mmnominal size)
41.64 Cum 4027.00 167684.28 INR One Lakh Sixty Seven Thousand Six Hundred & Eighty Four and Paise Twenty Eight Only
1.06 Centering & Shuttering with plywood or steelsheets including strutting, propping, bracingbothways and removal of formwork forfoundations in basements rafts, footings, strapbeams bases of columns, etc. upto plinth level.
39.20 Sqm 91.00 3567.20 INR Three Thousand Five Hundred & Sixty Seven and Paise Twenty Only
1.07 Reinforced cement concrete work in beams,suspended floors, roofs, griders having slopes upto 15°, landings, balconies, shelves, chajjas, lintels,bands, plain windows sills, staircases and spiralstaircases up to floor three level including curing,compaction, finishing with rendering in cementsand mortar 1 : 3 (1 cement : 3 coarse sand) andmaking good and joints excluding the cost ofcentering, shuttering and reinforcement : 1 : 1.5 :3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20 mm nominal size)
16.93 Cum 4280.00 72460.40 INR Seventy Two Thousand Four Hundred & Sixty and Paise Forty Only
1.08 Centering & shuttering with plywood or steelsheets including strutting, propping, bracingbothways with wooden members and removal offormwork for superstructure upto 4.5 m heightabove plinth, for : Suspended floors, roofslandings staircases, balconies, girders, cantilevers,bands, coping bed plates, anchor blocks, sills,chajjas, lintel, beam etc.
157.25 Sqm 153.00 24059.25 INR Twenty Four Thousand &Fifty Nine and Paise Twenty Five Only
1.09 Grading roof water proofing treatment with:Cement concrete 1 : 2 : 4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominalsize).
5.64 Cum 3740.00 21093.60 INR Twenty One Thousand &Ninety Three and Paise Sixty Only
1.1 Providing and fabricating reinforcement forR.C.C. work including straightening, cutting,bending, placing in position and binding(including cost of binding wire) all complete up tofloor three level. Thermo-mechanically Treatedbars (Tata, SAIL) 50Kg per Cum
2928.50 kg 73.00 213780.50 INR Two Lakh Thirteen Thousand Seven Hundred & Eighty and Paise Fifty Only
1.11 Random Rubble stone masonry for foundation andplinth in Cement Sand mortar above 30 cm thickwall in : Cement Mortar 1 : 6 (1-Cement : 6-Sand).
77.76 Cum 2014.00 156608.64 INR One Lakh Fifty Six Thousand Six Hundred & Eight and Paise Sixty Four Only
1.12 Brick masonry insuper structure upto third storeywith Flyash Lime Gypsum Bricks of classdesignation 75 as per IS code 12894-2002 inCement mortar 1 : 6 (1 cement : 6 coarse sand).
72.64 Cum 3247.00 235862.08 INR Two Lakh Thirty Five Thousand Eight Hundred & Sixty Two and Paise Eight Only
1.13 Plaster on new surface on walls in cement sandmortar 1 : 4 including racking of joints etc.complete fine finish : 20 mm thick
747.20 Sqm 120.00 89664.00 INR Eighty Nine Thousand Six Hundred & Sixty Four Only
1.14 Steel work in built up tubular trusses includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer, weldedand bolted including special shaped washers etc.complete above plinth level upto 4.5 mtrheight.Hot finished welded type tubes.
2440.00 Kg 80.00 195200.00 INR One Lakh Ninety Five Thousand Two Hundred Only
1.15 Structural steel work in single section fixedwithout connecting plate including cutting,hoisting, fixing in position and applying apriming coat of approved steel primer allcomplete above plinth level upto 4.5 mtr. heightin R.S. joist flats, tees, angles andchannels.Structural steel work welded in built upsections, trusses and framed work includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer allcomplete above plinth level upto 4.5 mtr height inR.S. joist flats, tees, angles and channels.
748.00 Kg 68.00 50864.00 INR Fifty Thousand Eight Hundred & Sixty Four Only
1.16 Providing and fixing steel gate grating and grillsmade of angles, tees, square bars or other flatsblack pipe with holdfast and fittings complete asper design and drawing including cutting weldingand fabrication with priming coat of red oxide.
1591.20 Kg 78.00 124113.60 INR One Lakh Twenty Four Thousand One Hundred & Thirteen and Paise Sixty Only
1.17 Polished Blue Kota stone flooring skirting, laidover 20 mm thick base of C.M. 1 : 4 and jointedwith grey cement slurry to match the shade of theslab including rubbing and polishing complete :For area of each slab from 2001 to 5000 Sq.Cm :25 mm thick slab.
72.00 Sqm 572.00 41184.00 INR Forty One Thousand One Hundred & Eighty Four Only
1.18 Polished Blue Kota Stone slab in steps, walls,pillars having fine machine cut edges laid on 12mm (Av.) thick cement mortar 1 : 3 and jointedwith grey cement slurry mixed with pigment tomatch the shade of the slab, including rubbingand polishing complete :30 mm thick slab area2001 to 5000 Sq.Cm.
4.32 Sqm 630.00 2721.60 INR Two Thousand Seven Hundred & Twenty One and Paise Sixty Only
1.19 Applying one coat of primer of approved brandand manufacture on wall surface including allscaffolding, (new surface) : Cement primer (onnew surface).
747.20 Sqm 15.00 11208.00 INR Eleven Thousand Two Hundred & Eight Only
1.2 Wall painting with plastic emulsion paint ofapproved brand and manufacture to give an evenshade : Two or more coats on new work includingpreparation of base with primer, putty, lippycomplete in all respect.
747.20 Sqm 62.00 46326.40 INR Forty Six Thousand Three Hundred & Twenty Six and Paise Forty Only
1.21 Painting with enamel paint of approved brand and manufacture to give an even shade : Two or morecoats on new work.
554.88 Sqm 46.00 25524.48 INR Twenty Five Thousand Five Hundred & Twenty Four and Paise Forty Eight Only
1.22 Providing and fixing steel glazed doors windowsand ventilator shutters of standard rolled steelsection joints mitred and welded with steel lugs 13x 3 mm, 10 cm. long embedded in cementconcrete block 15 x 10 x 10 cm. of 1 : 3 : 6 (1cement : 3 coarse sand : 6 graded stone aggregate20 mm nominal size) or with wooden plugs andscrews or rawl plugs and screws with fixing clipsor with bolts and nuts as required includingproviding and fixing of plain glass panes 4 mmthick with copper glazing clips and special metalsash putty of approved make or metal beadingwith screws complete including priming coat ofapproved steel primer, excluding the cost of metalbeading and other fitting except necessary hingesof pivots steel handles peg stay etc. as required :Partly fixed and partly openable [ fixed area not toexceed 33% ]
12.96 Sqm 1688.00 21876.48 INR Twenty One Thousand Eight Hundred & Seventy Six and Paise Forty Eight Only
1.23 Supplying and fixing fixed wire gauge of 14 meshx 24 gauge to the metal frame of rolled section bymetal beading 20 x 3 mm with suitable screw atnot exceeding 150 mm distance.
12.96 Sqm 433.00 5611.68 INR Five Thousand Six Hundred & Eleven and Paise Sixty Eight Only
1.24 Providing and fixing Square bars or other flatwelded to window, ventilators etc.
113.90 Kg 66.00 7517.40 INR Seven Thousand Five Hundred & Seventeen and Paise Forty Only
1.25 Providing and fixing of required color coatedGalvalume trapzoldal profile sheet of 0.5 mm totalcoated thickness and 0.45 mm base matcrialthickness of Hi- tensil steel with minimum 550MPA yeild strength at all height with all lead andlift upto pitch of 60 and as per detail technicalspecification enclosed as annexure -I anddirection of engineer incharge (the mode ofmearurement for payment shall be based onfinished /covered net surface area) the quotedrates shall be the excluding the cost of purlins,rafters and trusses etc.
260.00 Sqm 600.00 156000.00 INR One Lakh Fifty Six Thousand Only
1.26 Providing and fixing welded mesh / expandedmetal mesh in frame work, flat iron beading 20 x3 mm including top cross laps inside and out sideswelding, iron bolts, screws, clips etc. Weldedmesh 25 x 25 mm x 16 gauge.
256.00 Sqm 538.00 137728.00 INR One Lakh Thirty Seven Thousand Seven Hundred & Twenty Eight Only
1.27 Providing and fixing external grade board solidcore single leaf flush door shutters ISI 2202-67marked using Phenol formal dehyderesin in glueboth sides with approved steel fittings complete asper annexure 'A' : 35 mm thick commercialVeneer Both side
15.12 Sqm 1974.00 29846.88 INR Twenty Nine Thousand Eight Hundred & Forty Six and Paise Eighty Eight Only
1.28 P/F 1 mm thick for mica/decolam or equivalenton both side of flush door shutters with necessaryadhesive complete in all respect.
15.12 Sqm 1050.00 15876.00 INR Fifteen Thousand Eight Hundred & Seventy Six Only
Total in Figures 1990602.76 INR Nineteen Lakh Ninety Thousand Six Hundred & Two and Paise Seventy Six Only
Quoted Rate in FiguresSelect
0.00 INR Zero Only
Quoted Rate in Words INR Zero Only
Name of the
Bidder/
Bidding Firm /
Company :
NUMBER # TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
Sl.
No.
Item Description Quantity Units Estimated Rate
in
Rs. P
TOTAL AMOUNT With
Taxes in
Rs. P
TOTAL AMOUNT
In Words
1 2 3 4 5 6 7
1 Name of work : - Construction of Girls Hostel Agriculture
University at Ummedganj Kota
1.01 Earth work in excavation in foundation trenches or drains including
dressing of sides and ramming of bottoms, lift upto 1.5 Mtr.
including taking out the excavated soil and depositing and refilling
of jhiri with watering and ramming and disposal of surplus
excavated soil as directed within a lead of 50 Mtr.
361.61 Cum 152.00 54964.72 INR Fifty Four Thousand Nine Hundred & Sixty Four and Paise Seventy Two Only
1.02 Supplying and filling crusher sand including consolidation and
watering complete including all lead & lift242.05 Cum 413.70 100136.09 INR One Lakh One Hundred & Thirty Six and Paise Nine
Only
1.03 Providing and laying in position cement concrete including curing,
compaction etc. complete in specified grade excluding the cost of
centering and shuttering - All work up to plinth level.1 : 4 : 8 (1
cement : 4 coarse sand : 8 graded stone aggregate 40 mm
nominal size).
67.26 Cum 2497.00 167948.22 INR One Lakh Sixty Seven Thousand Nine Hundred & Forty Eight and Paise Twenty Two Only
1.04 Providing and laying in position specified grade of reinforced
cement concrete including curing, compaction, finishing with
rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand)
and making good the joints excluding the cost of centering,
shuttering and reinforcement - All work up to plinth level : 1 : 1.5 :
3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm
nominal size)
156.05 Cum 4027.00 628413.35 INR Six Lakh Twenty Eight Thousand Four Hundred & Thirteen and Paise Thirty Five Only
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the
Bidder Name and Values only )
Percentage BoQ
Tender Inviting Authority: ESTATE OFFICER, AGRICULTURE UNIVERSITY, KOTA
Name of Work: Construction of Girls Hostel Agriculture University at Ummedganj Kota
Contract No:EO/NIT No. 15-2/2018-19
Validate Print Help
1.05 Centering & Shuttering with plywood or steel sheets including
strutting, propping, bracing bothways and removal of formwork for
foundations in basements rafts, footings, strap beams bases of
columns, etc. upto plinth level.
574.12 Sqm 91.00 52244.92 INR Fifty Two Thousand Two Hundred & Forty Four and Paise Ninety Two Only
1.06 Filling available excavated earth (excluding rock) in trenches, plinth
side of foundation etc. in layers not exceeding 20 cm. in depth,
consolidating each deposited layer by ramming and watering
including lead upto 50 Mtr. and lift upto 1.5 Mtr.
289.77 Cum 49.00 14198.73 INR Fourteen Thousand One Hundred & Ninety Eight and Paise Seventy Three Only
1.07 Random rubble dry stone Kharanja under floor. 141.94 Cum 805.00 114261.70 INR One Lakh Fourteen Thousand Two Hundred & Sixty One and Paise Seventy Only
1.08 Random Rubble stone masonry for foundation and plinth in
Cement Sand mortar above 30 cm thick wall in : Cement Mortar 1 :
6 (1-Cement : 6-Sand).
159.88 Cum 2014.00 321998.32 INR Three Lakh Twenty One Thousand Nine Hundred & Ninety Eight and Paise Thirty Two Only
1.09 Brick masonry in super structure upto third storey with Flyash Lime
Gypsum Bricks of class designation 75 as per IS code 12894-
2002 in Cement mortar 1 : 6 (1 cement : 6 coarse sand). Add extra
over item No. 5.40 for Flyash Lime Gypsum brick work in super
structure upto third storey.
189.74 Cum 3247.00 616085.78 INR Six Lakh Sixteen Thousand &Eighty Five and Paise Seventy Eight Only
1.10 Half Brick masonry in super structure upto third storey using
Flyash Lime Gypsum Bricks of designation 75 as per IS Code
12894-2002 Cement mortar 1 : 4 Add extra over item No. 5.47 for
half Flyash Lime Gypsum Brick masonry in super structure upto
third storey.
481.57 Sqm 413.00 198888.41 INR One Lakh Ninety Eight Thousand Eight Hundred & Eighty Eight and Paise Forty One Only
1.11 Reinforced cement concrete work in walls (any thickness)
including attached pilasters, buttresses, plinth and string courses,
fillets, columns, pillars, piers, abutments, posts and struts etc. up
to floor three level including curing, compaction, finishing with
rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand)
and making good the joints excluding cost of centering shuttering
and reinforcement : : 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3
graded stone aggregate 20 mm nominal size)
19.38 Cum 4149.00 80407.62 INR Eighty Thousand Four Hundred & Seven and Paise Sixty Two Only
1.12 Reinforced cement concrete work in beams, suspended floors,
roofs, griders having slopes up to 15°, landings, balconies,
shelves, chajjas, lintels, bands, plain windows sills, staircases and
spiral staircases up to floor three level including curing,
compaction, finishing with rendering in cement sand mortar 1 : 3 (1
cement : 3 coarse sand) and making good and joints excluding the
cost of centering, shuttering and reinforcement : 1 : 1.5 : 3 (1
cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm
nominal size)
116.41 Cum 4280.00 498234.80 INR Four Lakh Ninety Eight Thousand Two Hundred & Thirty Four and Paise Eighty Only
1.13 Centering & shuttering with plywood or steel sheets including
strutting, propping, bracing bothways with wooden members and
removal of formwork for superstructure upto 4.5 m height above
plinth, for : Suspended floors, roofs landings staircases, balconies,
girders, cantilevers, bands, coping bed plates, anchor blocks, sills,
chajjas, lintel, beam etc.
944.74 Sqm 153.00 144545.22 INR One Lakh Forty Four Thousand Five Hundred & Forty Five and Paise Twenty Two Only
1.14 Centering & shuttering with plywood or steel sheets including
strutting, propping, bracing bothways with wooden members and
removal of formwork for superstructure upto 4.5 m height above
plinth, for : Columns, pillars, posts and struts etc.
162.16 Sqm 211.00 34215.76 INR Thirty Four Thousand Two Hundred & Fifteen and Paise Seventy Six Only
1.15 Providing and fabricating reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position and binding
(including cost of binding wire) all complete up to floor three level.
Thermo-mechanically Treated bars (Tata, SAIL) 90 Kg Per Cum of
Concrete
26266.00 Kg 73.00 1917418.00 INR Nineteen Lakh Seventeen Thousand Four Hundred & Eighteen Only
1.16 Grading roof water proofing treatment with :Cement concrete 1 : 2
: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size).
19.32 Cum 3740.00 72256.80 INR Seventy Two Thousand Two Hundred & Fifty Six and Paise Eighty Only
1.17 Plaster on new surface on wall in cement sand mortar 1:3
including raking of joints etc. complete fine finish : 12 mm thick567.74 Sqm 95.00 53935.30 INR Fifty Three Thousand Nine Hundred & Thirty Five
and Paise Thirty Only
1.18 Plaster on new surface on walls in cement sand mortar 1 : 4
including racking of joints etc. complete fine finish : 20 mm thick847.59 Sqm 120.00 101710.80 INR One Lakh One Thousand Seven Hundred & Ten
and Paise Eighty Only
1.19 Plaster on new surface on walls in cement sand mortar 1 : 6
including racking of joint etc. complete fine finished : 20 mm thick3122.77 Sqm 105.00 327890.85 INR Three Lakh Twenty Seven Thousand Eight Hundred
& Ninety and Paise Eighty Five Only
1.20 Add extra item No. 12.1 to 12.12 for plaster done over ceiling. 567.74 Sqm 27.00 15328.98 INR Fifteen Thousand Three Hundred & Twenty Eight and Paise Ninety Eight Only
1.21 Making grooves as per design in plaster 10 mm to 20 mm wide. 1987.68 Mtr. 5.00 9938.40 INR Nine Thousand Nine Hundred & Thirty Eight and Paise Forty Only
1.22 Providing and fixing 15 to 20 mm thick Granite stone slab mirror
polished and machine edge cut in walls, pillars, steps, Shelves,
Sills Counters, Floors etc. laid on 12 mm (Av.) thick base of
cement mortar 1 : 3 (1 cement : 3 coarse sand) jointing with white
cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment
to match the shade of the granite slab complete including rubbing
and polishing of : Jhanshi (Red / Choclate Colour) Above 3601
Cm2 Slabs
43.73 Sqm 2632.00 115084.20 INR One Lakh Fifteen Thousand &Eighty Four and Paise Twenty Only
1.23 Providing and fixing 1st quality standard White / Ivory Glazed Tiles
ISI marked [IS : 13753] of size 300 mm x 200 mm in walls, floors,
steps, pillars etc. laid on a bed of neat cement slurry finished with
flush pointing in white cement mixed with pigment to match the
shade of tile complete (excluding the cost of cement plaster on
walls and pillar).Catgory-I : Kajaria, Johnson, Somani make etc.
387.84 Sqm 633.00 245502.72 INR Two Lakh Forty Five Thousand Five Hundred & Two and Paise Seventy Two Only
1.24 Providing and fixing 1st quality MAT finished ceremic tile size 300
x 300 mm confirming to IS : 13753 colour such as white, grey,
ivory, fume red brown in walls, floors, steps, pillars etc. laid on a
bed of neat cement slurry including nicely finished joints using
water proof joint filler powder (Untile of Roffe make) and finishing
with flush pointing in white cement mixed with pigment to match
the shade of the complete (including the cost of cement mortor
bed 1:4). Category -A : Kajaria, Jhonson, Somani make
70.40 Sqm 656.00 46182.40 INR Forty Six Thousand One Hundred & Eighty Two and Paise Forty Only
1.25 Providing and fixing stone slabs table rubbed, 18-20 mm thick in
Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on
12 mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand)
jointing with white cement mortar 1:2 (1 white cement : 2 marble
dust) with pigment to match the shade of the marble slab complete
including grinding, rubbing and polishing. Rajnagar 2nd quality with
light spots and streaks. Above 3601 Cm2 Slabs
73.44 Sqm 843.00 61909.92 INR Sixty One Thousand Nine Hundred & Nine and Paise Ninety Two Only
1.26 Extra for providing edge moulding to 18 mm thick marble stone
counters, vantities etc. over item No. 7.1 & 7.2 including machine
polishing to edge to give high gloss finish etc. complete as per
design approved by Engineer-in-Charge. Marble work
122.40 Mtr. 99.00 12117.60 INR Twelve Thousand One Hundred & Seventeen and Paise Sixty Only
1.27 Extra for providing edge moulding to 18 mm thick marble stone
counters, vantities etc. over item No. 7.1 & 7.2 including machine
polishing to edge to give high gloss finish etc. complete as per
design approved by Engineer-in-Charge. Marble work
62.58 Mtr. 143.00 8948.94 INR Eight Thousand Nine Hundred & Forty Eight and Paise Ninety Four Only
1.28 Extra for providing opening of required size & shape for wash
basin / kitchen sink in kitchen platform, vanit counters and similar
location in marble / stone work including necessary holes for pillars
taps etc. including rubbing and polishing of cut edge etc. complete.
10.00 Each 22.00 220.00 INR Two Hundred & Twenty Only
1.29 Providing and fixing external grade board solid core single leaf
flush door shutters ISI 2202-67 marked using Phenol formal
dehyderesin in glue both sides with approved steel fittings
complete as per annexure 'A' : 35 mm thick commercial Veneer
Both side
44.10 Sqm 1974.00 87053.40 INR Eighty Seven Thousand &Fifty Three and Paise Forty Only
1.30 Providing and fixing external grade board solid core single leaf
flush door shutters ISI 2202-67 marked using Phenol formal
dehyderesin in glue both sides with approved steel fittings
complete as per annexure 'A' : 19 mm thick ( for almirah shutter)
commercial Veneer Both side
64.26 Sqm 1073.00 68950.98 INR Sixty Eight Thousand Nine Hundred & Fifty and Paise Ninety Eight Only
1.31 Add extra in Flush doors : For External teak wood lipping on flush
door 35mmx6mm 284.00 Rm 55.00 15620.00 INR Fifteen Thousand Six Hundred & Twenty Only
1.32 Providing and fixing steel gate grating and grills made of angles,
tees, square bars or other flats black pipe with holdfast and fittings
complete as per design and drawing including cutting welding and
fabrication with priming coat of red oxide. LS for grills etc.
1000.00 Kg 78.00 78000.00 INR Seventy Eight Thousand Only
1.33 Steel work in built up tubular trusses including cutting, hoisting,
fixing in position and applying a priming coat of approved steel
primer, welded and bolted including special shaped washers etc.
complete above plinth level upto 4.5 mtr height. Hot finished
welded type tubes.
1200.00 Kg 80.00 96000.00 INR Ninety Six Thousand Only
1.34 Providing batta (gola) 75 mm x 75 mm in cement concrete (1:2:4)
including finishing with cement mortar 1:3 as per standard design.226.22 Mtr 33.00 7465.26 INR Seven Thousand Four Hundred & Sixty Five and
Paise Twenty Six Only
1.35 P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting
and steps etc.in different sizes (thickness to be specified by
manufactuer) with water absortion less than 0.08% and conforming
to IS 15622 of approved make in all colour and shade, laid with 20
mm thick CM 1 : 4 including grounting the joints with white cement
and matching pigment etc complete size 800 mm X 800 mm
492.59 Sqm 1034.40 509535.10 INR Five Lakh Nine Thousand Five Hundred & Thirty Five and Paise Ten Only
1.36 Applying priming coat : With ready mix pink or gray primer of
approved brand and manufacture on wood work hard and soft
wood.
97.02 Sqm 19.00 1843.38 INR One Thousand Eight Hundred & Forty Three and Paise Thirty Eight Only
1.37 Applying one coat of primer of approved brand and manufacture
on wall surface including all scaffolding, (new surface) : Cement
primer (on new surface).
4538.11 Sqm 15.00 68071.65 INR Sixty Eight Thousand &Seventy One and Paise Sixty Five Only
1.38 Wall painting with plastic emulsion paint of approved brand and
manufacture to give an even shade : Two or more coats on new
work including preparation of base with primer, putty, lippy
complete in all respect.
3690.51 Sqm 62.00 228811.62 INR Two Lakh Twenty Eight Thousand Eight Hundred & Eleven and Paise Sixty Two Only
1.39 Painting with enamel paint of approved brand and manufacture to
give an even shade : Two or more coats on new work.97.02 Sqm 46.00 4462.92 INR Four Thousand Four Hundred & Sixty Two and
Paise Ninety Two Only
1.40 Providing and fixing Staincase railing 90 cm high from nosing of
made of following specifications.50 mm outer dia (2 mm thick)
S.S. pipe hand rail.40 mm outer dia (2 mm thick) S.S. pipe
baluster @ 1.00 Mtr. 4 Nos. 20 mm f S. S pipe intermediate
runners parallel to hand.S.S. shoe 1.60 mm thick 75 mm outer dia.
At each baluster Baluster to be welded with S.S. plate 50 mm dia
(3 mm thick) anchored in C.C. block with suitable dash fastners50
mm dia & 2 mm thick S.S. pipe for start and end vertical
ornamental posts to be provided as per direction of Engineer-in-
chargeThe stainless steel work shall be brushed steel finish with
all joints/welds properly grinded to final finish. The stainless steel
shall be 304 grade and shall confirm to relevant I.S.
15.00 Rmt. 3700.00 55500.00 INR Fifty Five Thousand Five Hundred Only
1.41 Painting with Acrylic Exterier Paint Birla/Nerolac/Asian/Berger of
Equivelant of approved brand to give and even shade with all
scaffolding two or more coat on new work after cleaning of existing
surface complete in all respect. As per direction of Engineer in
charge.
847.59 Sqm 69.00 58483.71 INR Fifty Eight Thousand Four Hundred & Eighty Three and Paise Seventy One Only
1.42 Providing and fixing anodized aluminium work (Anodizing to be got
done from approved Anodizer) for doors, windows, ventilators and
partition with extruded built up standard tubular and other sections
of approved make confirming to IS : 733 and IS : 1285 anodised
transparent 81 dyed to required shade according to IS : 1868.
(Minimum anodic coating of grade AC 15), fixed with rawl plugs
and screws or with fixing clips, or with expansion hold fasterners
including necessary filling up of gas at junctions, at top, bottom
and sides with required PVC / neoprene felt etc.; Aluminium
section shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle Aluminium
snap beading for glazing / paneling, C.P. brass / stainless steel
screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete
as per architectural drawings and the directions of Engineer-in-
charge. (Glazing and paneling to be paid for separately).For
shutters of doors, windows & ventilators including providing and
fixing hinges / rollers etc. and making provision for fixing of fittings
wherever required (lockes shall be paid for separately).
809.10 Kg 340.00 275094.00 INR Two Lakh Seventy Five Thousand &Ninety Four Only
1.43 Providing and fixing brass lock without handle for Aluminium door,
of approved quality, make & design as directed by Engineer-in-
charge.
4.00 Each 261.00 1044.00 INR One Thousand &Forty Four Only
1.44 Supplying and fixing fixed stainless steel wire gauge of 14 mesh x
24 gauge to the aluminium frame with aluminium beading/channel.26.42 Sqm 591.00 15614.22 INR Fifteen Thousand Six Hundred & Fourteen and
Paise Twenty Two Only
1.45 Provding and fixing Stainless steel gate gratting and made of
Stainless steel pipe with hold fast and fitting and complete as per
design and driwing including cutting welding etc. The stainless
steel shall be 304 grade and shall confirm to relevant I.S.
Specifications.
91.80 Kg 450.00 41310.00 INR Forty One Thousand Three Hundred & Ten Only
1.46 Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with PVC / neoprene gasket etc.
complete as per the architectural drawings and the directions of
engineer-in-charge (Cost of aluminium snap beading shall be paid
in basic item). With glass panes of 5.0 mm thickness (weight not
less than 13.75 kg./sqm) as per IS : 2835.
61.83 Sqm 669.00 41364.27 INR Forty One Thousand Three Hundred & Sixty Four and Paise Twenty Seven Only
1.47 Providing and fixing double action hydraulic floor spring of
approved brand and manufacture to aluminium door shutter
confirming to IS : 6315 including cost of cutting floors as required,
embedding in floors and cover plate etc. complete as per direction
of Engineer-in-charge.
4.00 Each 1826.00 7304.00 INR Seven Thousand Three Hundred & Four Only
1.48 P/F 1 mm thick for mica/decolam or equivalent on both side of
flush door shutters with necessary adhesive complete in all
respect.
64.26 Sqm 1050.00 67473.00 INR Sixty Seven Thousand Four Hundred & Seventy Three Only
1.49 Providing & fixing Aluminium composit panel 5mm thick by using
0.5 mm thick aluminium foil and 5mm thick reflective glass (Sand
bobin, ASHI India or equivalent), and framing of 2mm thick
aluminium section of 50x50 mm size silicon & glazing tap etc.
complete, upto IIIrd floor, Pattern as approved by Engineer in
Charge.
31.50 Sqm 2800.00 88200.00 INR Eighty Eight Thousand Two Hundred Only
1.50 Providing and fixing of required color coated Galvalume trapzoldal
profile sheet of 0.5 mm total coated thickness and 0.45 mm base
matcrial thickness of Hi- tensil steel with minimum 550 MPA yeild
strength at all height with all lead and lift upto pitch of 60 and as
per detail technical specification enclosed as annexure -I and
direction of engineer incharge (the mode of mearurement for
payment shall be based on finished /covered net surface area) the
quoted rates shall be the excluding the cost of purlins, rafters and
trusses etc.
31.50 Sqm 600.00 18900.00 INR Eighteen Thousand Nine Hundred Only
1.51 P & F European type white glazed vitreous china 1st
quality W.C
pan (IS : 2556 Mark) with P or S trap including cutting and making
good the wall and floor.
4.00 Each 1601.00 6404.00 INR Six Thousand Four Hundred & Four Only
1.52 Providing and fixing Water Closet Seat Covers with brass hinges
complete. '-- do -- white 4.00 Each 353.00 1412.00 INR One Thousand Four Hundred & Twelve Only
1.53 P & F Low level Flushing Cistern of 10 litres capacity (IS :
2556mark). Of approved make with complete fittings C.I. brackets
duly painted, brass ball cock with ball, (IS: 1703 mark) complete
including cutting and making good the wall: PVC with PVC bend
of make Commander champion
10.00 Each 1246.00 12460.00 INR Twelve Thousand Four Hundred & Sixty Only
1.54 P & F WVC wash basin (1st
quality, I.S. : 2556 Mark) of approved
make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock
(IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved
make, 25 mm G.I. waste pipe complete including cutting & making
good the wall.: 460 dia for counter top.
6.00 Each 2240.00 13440.00 INR Thirteen Thousand Four Hundred & Forty Only
1.55 P & F Bottle Trap of approved make: C.P Brass 32 mm 6.00 Each 425.00 2550.00 INR Two Thousand Five Hundred & Fifty Only
1.56 Providing and fixing Beveled edge Mirror of special glass of
approved make (Atul / equivalent) complete with 6 mm thick
asbestos cement sheet ground fixed to wooden screws & washers.
Other Size
8.10 Sqm 1075.00 8707.50 INR Eight Thousand Seven Hundred & Seven and Paise Fifty Only
1.57 P & F Toilet Shelf of approved quality/make: Synthetic Material
with tumbler of approved quality/make size 470 x 114 x 36mm10.00 Each 327.00 3270.00 INR Three Thousand Two Hundred & Seventy Only
1.58 P & F Toilet Shelf of approved quality/make: Acrylic shelf on C.P.
brass casted brackets & guard rail of approved make as per
direction of EI of size 550x125mm
2.00 Each 755.00 1510.00 INR One Thousand Five Hundred & Ten Only
1.59 Glass Shelf with edges rounded off Anodised Aluminium angle
frame & C.P. brass brackets & guard rail size 600x120mm9.00 Each 273.00 2457.00 INR Two Thousand Four Hundred & Fifty Seven Only
1.60 P & F Grating of approved quality/make: Synthetic Material(PTMT)
of approved quality/make size 125mm dia2.00 Each 65.00 130.00 INR One Hundred & Thirty Only
1.61 P & F Tooth Paste & Brush Holder of approved quality/make:
Stainless Steel6.00 Each 215.00 1290.00 INR One Thousand Two Hundred & Ninety Only
1.62 Providing and fixing Toilet Paper Holder with rod of approved
quality / make.C.P. Brass (Heavy & Superior Quality) 4.00 Each 405.00 1620.00 INR One Thousand Six Hundred & Twenty Only
1.63 P & F Twin- peg of approved quality / make Acrylic 56.00 Each 51.00 2856.00 INR Two Thousand Eight Hundred & Fifty Six Only
1.64 P & F Shower arm 15mm dia of approved quality/make. (-do-) size
370mm.(-do-)8.00 Each 252.00 2016.00 INR Two Thousand &Sixteen Only
1.65 P & F Bath Shower of approved quality/make. C.P. brass of Heavy
& superior quality 150mm.8.00 Each 253.00 2024.00 INR Two Thousand &Twenty Four Only
1.66 P & F Extension Pipe for bib cocks of approved quality/make. (-do-
) 100 X 15mm.8.00 Each 94.00 752.00 INR Seven Hundred & Fifty Two Only
1.67 Providing and fixing Jet Spray for water closet with C.P. Copper
Tube flange of approved make4.00 Each 266.00 1064.00 INR One Thousand &Sixty Four Only
1.68 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved
make: Synthetic Material(PTMT) bib cock of approved quality/
make, nominal bore, 15mm, 86 mm long. Long Body, 175 mm
long
20.00 Each 256.00 5120.00 INR Five Thousand One Hundred & Twenty Only
1.69 P & F Kitchen & Lab. Sink of approved make with C.I. brackets
duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with
rubber plug, 40 mm G.I. waste pipe up-to floor level complete
including cutting and making good the wall & floor :Overall size
(inches) 37 x 18 x 7 Bowl size (inches) 17x15x7 (with drain board)
2.00 Each 4224.00 8448.00 INR Eight Thousand Four Hundred & Forty Eight Only
1.70 P & F Kitchen & Lab. Sink of approved make with C.I. brackets
duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with
rubber plug, 40 mm G.I. waste pipe up-to floor level complete
including cutting and making good the wall & floor : Overall size
(inches) 45 x 20 x 8 Bowl size (inches) 20x16x8 (with drain board)
For Attech toilet
2.00 Each 6610.00 13220.00 INR Thirteen Thousand Two Hundred & Twenty Only
1.71 P & F Sink Cocks of superior quality & approved made :(-do-)
Casted Spout 15 mm. 4.00 Each 888.00 3552.00 INR Three Thousand Five Hundred & Fifty Two Only
1.72 P & F Push Cock superior quality, of approved make Synthetic
Material (PTMT) push cock of approved quality/make 15mm. 4.00 Each 186.00 744.00 INR Seven Hundred & Forty Four Only
1.73 P & F Stop Cock (IS :8931 Mark), superior quality & of approved
make: Synthetic material (PTMT) stop cock of approved
quality/make 15mm.
18.00 Each 201.00 3618.00 INR Three Thousand Six Hundred & Eighteen Only
1.74 Providing and fixing Ball Cock (IS : 1703 Mark) with Rod & P.V.C.
Ball complete.Synthetic material (PTMT) of approved make 15mm
nominal size.
4.00 Each 240.00 960.00 INR Nine Hundred & Sixty Only
1.75 Providing and fixing Inlet Connection (Angle, Valves) Superior
quality, of approved make.for wash basin Gyser etc. Synthetic
Material (PTMT) Inlet connection of approved quality/make 15 mm
nominal size.
24.00 Each 199.00 4776.00 INR Four Thousand Seven Hundred & Seventy Six Only
1.76 Providing and fixing Full -way Valve (IS : 778 Mark) or wheel valve
of approved make. Gun Metal 25mm nominal bore.6.00 Each 481.00 2886.00 INR Two Thousand Eight Hundred & Eighty Six Only
1.77 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the
BIS license No), of approved make with cover, 25mm dia 1M long
G.I. over-flow pipe & 25 Cm. long wash out pipe with plug &
socket, including making connection etc., complete of approved
design: 1000 (-do-)
5.00 Each 6480.00 32400.00 INR Thirty Two Thousand Four Hundred Only
1.78 Hoisting Charges for each floor : For items 2.26.5 to 2.26.8 5.00 Each 110.00 550.00 INR Five Hundred & Fifty Only
1.79 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all
CPVC plain & brass threaded fittings i/c fixing the pipe with clamps
at 1.00 m spacing. This includes jointing of pipes & fittings with
one step CPVC solvent cement and the cost of cutting chases and
making good the same including testing of joints complete as per
direction of Engineer in Charge. (Concealed work including cutting
chases and making good the walls etc.,) 15 mm nominal outer dia
pipes
200.00 Rm 190.00 38000.00 INR Thirty Eight Thousand Only
1.80 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all
CPVC plain & brass threaded fittings i/c fixing the pipe with clamps
at 1.00 m spacing. This includes jointing of pipes & fittings with
one step CPVC solvent cement and the cost of cutting chases and
making good the same including testing of joints complete as per
direction of Engineer in charge. (Concealed work including cutting
chases and making good the wall etc.,) 25 mm nominal outer dia
pipes
150.00 Rm 198.00 29700.00 INR Twenty Nine Thousand Seven Hundred Only
1.81 Construction of chamber in all type of soil with 300 mm thick
masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm
thick insider plaster in Cm 1:6, finished with floating neat cement,
50mm thick M-15 grade C.C. flooring , earthwork etc. complete as
per design including disposal of surplus earth within a lead of 50
mtr.-do- size 450 x 450mm depth upto 0.5 M Cement cover with
frame
6.00 Each 1683.00 10098.00 INR Ten Thousand &Ninety Eight Only
1.82 Construction of Chamber in all types of soil with 300 mm thick
masnory in CM. 1 : 6, 100 mm thick C.C. 1 : 5 : 10 in foundation ,
20 mm thick inside plaster in Cm 1 : 6, finished with floating neat
cement 50 mm thick M-15 grade C.C. flooring earthwork etc.
complete as per design including disposal of surplus earth within a
lead of 50 Mtr. Inside size 600 x 450 mm upto depth of 1.5 M & 38
Kg CI cover with frame
6.00 Each 2380.00 14280.00 INR Fourteen Thousand Two Hundred & Eighty Only
1.83 Construction of septic Tank in all types of soil with 40 Cm .thick
masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade
C.C flooring & over stone slab covering ,80 mm thick slab ,jointing
of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition
walls, 20 mm thick plaster in CM 1:6 finished with neat floating
cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm
dia each Ferro cement cover with frame, earth work etc. complete
as per approved drawing including disposal of surplus earth within
a lead of 50 mtr:- Size 230 x110 x150 cm.(for 20 users)
1.00 Rm 28985.00 28985.00 INR Twenty Eight Thousand Nine Hundred & Eighty Five Only
1.84 Construction of septic Tank in all types of soil with 40 Cm .thick
masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade
C.C flooring & over stone slab covering ,80 mm thick slab ,jointing
of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition
walls, 20 mm thick plaster in CM 1:6 finished with neat floating
cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm
dia each Ferro cement cover with frame, earth work etc. complete
as per approved drawing including disposal of surplus earth within
a lead of 50 mtr:- Size 400 x140x150 cm.(for 50 users)
2.00 Rm 45067.00 90134.00 INR Ninety Thousand One Hundred & Thirty Four Only
1.85 Construction of Cement Concrete Chamber 125mm dia on
depressed floor upto 45cm height from floor with : Stainless Steel
Sheet Grating
40.00 Each 171.00 6840.00 INR Six Thousand Eight Hundred & Forty Only
1.86 Providing and fixing Unplasticized Poly Vinyl Chloride (UPVC)
SWR Pipes Type B for sciland waste discharge system (IS :
13592 : 1992 Marked) of approved quality / make 110 mm dia
120.00 Each 242.00 29040.00 INR Twenty Nine Thousand &Forty Only
1.87 Providing and fixing Unplasticized Poly Vinyl Chloride (UPVC)
SWR Pipes fittings Type B for sciland waste discharge system (IS
: 13592 : 1992 Marked) of approved quality / make.
1.88 Coupler 110mm dia 50.00 Each 75.00 3750.00 INR Three Thousand Seven Hundred & Fifty Only
1.89 Bend 87.5 Dg. 110mm dia 36.00 Each 108.00 3888.00 INR Three Thousand Eight Hundred & Eighty Eight Only
1.90 Door Bend 87.5 Dg. 110mm dia 12.00 Each 134.00 1608.00 INR One Thousand Six Hundred & Eight Only
1.91 Pipe Clip 110 mm dia 100.00 Each 21.00 2100.00 INR Two Thousand One Hundred Only
1.92 Offset 110mm dia 12.00 Each 196.00 2352.00 INR Two Thousand Three Hundred & Fifty Two Only
1.93 Nahni Trap with Jali 4” 110mm dia 24.00 Each 119.00 2856.00 INR Two Thousand Eight Hundred & Fifty Six Only
1.94 Vent Cowel 110mm dia 4.00 Each 41.00 164.00 INR One Hundred & Sixty Four Only
1.95 Wiring of light point/ fan point/ exhaust fan point/ call bell point with
1.5 sq. mm nominal size FR PVC insulated unsheathed flexible
copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR
PVC insulated unsheathed flexible copper earth conductor 1.1 kV
grade (IS:694) of approved make in surface / recessed ISI marked
medium duty PVC conduit & it's accessories, round tiles,Hot
Dipped Galvanized Modular Box of 20SWG with earth terminal, 6
A Modular switch,Modular plate with grid plate, screws, making
connections, testing etc. as required. G-1
1.96 Short point (up to 3 mtr.) 28.00 P. Point 260.00 7280.00 INR Seven Thousand Two Hundred & Eighty Only
1.97 Medium point (up to 6 mtr.) 53.00 P. Point 377.00 19981.00 INR Nineteen Thousand Nine Hundred & Eighty One Only
1.98 Long point (up to 10 mtr..) 69.00 P. Point 508.00 35052.00 INR Thirty Five Thousand &Fifty Two Only
1.99 Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal
size FR PVC insulated unsheathed flexible copper conductor 1.1
kV grade and 1.5 sq. mm nominal size FR PVC insulated
unsheathed flexible copper earth conductor 1.1 kV grade(IS:694)
of approved make in surface / recessed ISI marked medium duty
PVC conduit & it's accessories, Hot Dipped Galvanized M.S
Modular box of 20 SWG with earth terminal, 6 A modular switch, 6
A modular socket, Modular plate with grid plate, screws, making
connections, testing etc. as required. G-1
2.00 On board 36.00 P. Point 244.00 8784.00 INR Eight Thousand Seven Hundred & Eighty Four Only
2.01 Medium point (up to 6 mtr.) 14.00 P. Point 445.00 6230.00 INR Six Thousand Two Hundred & Thirty Only
2.02 Long point (up to 10 mtr..) 16.00 P. Point 571.00 9136.00 INR Nine Thousand One Hundred & Thirty Six Only
2.03 Supplying and fixing of power plug point Modular accessories on
hot dipped galvanized modular box of 20 SWG on surface or in
recessed with suitable size of grid plate with cover plate including
cost of modular 16 amp. Switch and socket outlet, making
connection, testing, etc. as required. G-1
28.00 Each 538.00 15064.00 INR Fifteen Thousand &Sixty Four Only
2.05 S&F following sizes (dia.) of ISI marked medium duty PVC conduit
along with accessories in surface / recessed using saddles,
clamps, fastener as required including cutting the wall and making
good the same as required. GROUP-1
2.06 20 mm 150.00 Rmt 32.00 4800.00 INR Four Thousand Eight Hundred Only
2.07 25 mm 360.00 Rmt 42.00 15120.00 INR Fifteen Thousand One Hundred & Twenty Only
2.08 32 mm 60.00 Rmt 65.00 3900.00 INR Three Thousand Nine Hundred Only
2.09 Supplying and drawing FR PVC insulated & unsheathed flexible
copper conductor ISI marked (IS:694) of 1.1 kV grade and
approved make in existing surface or recessed conduit/casing
capping including making connections etc. as required.G-1
2.10 1 x 1.5 sq.mm 200.00 Rmt 14.00 2800.00 INR Two Thousand Eight Hundred Only
2.11 2 x 2.5 sq. mm. + 1x1.5sqmm 300.00 Rmt 53.00 15900.00 INR Fifteen Thousand Nine Hundred Only
2.12 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 400.00 Rmt 77.00 30800.00 INR Thirty Thousand Eight Hundred Only
2.13 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. 60.00 Rmt 109.00 6540.00 INR Six Thousand Five Hundred & Forty Only
2.14 1 x 4.0 sq.mm 60.00 Rmt 30.00 1800.00 INR One Thousand Eight Hundred Only
2.15 4 x 10.0 sq.mm 60.00 Rmt 305.00 18300.00 INR Eighteen Thousand Three Hundred Only
2.16 P & F 18 SWG Sheet steel boxes duly finished with two coats of
red oxide and with earthing terminal of following sizes (nominal
size) on surface or in recessed as required.
2.17 200mm x 250mm x 75mm 6.00 Each 101.00 606.00 INR Six Hundred & Six Only
2.18 P & F in position frame made out of M.S. angle (riveted or welded)
finished with two coats of red oxide and enamel paint including
cutting, welding, holes etc.of following sizes as required.
2.19 25mm x 25mm x 3mm 18.00 Rmt 77.00 1386.00 INR One Thousand Three Hundred & Eighty Six Only
2.20 P&F 240/415 V AC MCB with positive isolation of breaking
capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI
marked IS 8828(1996)]/ conforming to IEC 60898 in existing
board/sheets including making connections, testing etc. as
required. G-A1
2.21 Single pole MCB 6 A to 32 A rating 49.00 Each 166.10 8138.90 INR Eight Thousand One Hundred & Thirty Eight and Paise Ninety Only
2.22 Triple pole MCB 40 A 63 A rating 3.00 Each 1137.40 3412.20 INR Three Thousand Four Hundred & Twelve and Paise Twenty Only
2.23 Four pole MCB 40 A 63 A rating 2.00 Each 1515.80 3031.60 INR Three Thousand &Thirty One and Paise Sixty Only
2.24 Double pole MCB 6 A to 32 A rating 2.00 Each 441.10 882.20 INR Eight Hundred & Eighty Two and Paise Twenty Only
2.25 P&F Recessed/ Surface mounting heavy duty horizontal type
sheet steel Distribution board phophatised/ powder painted
complete with suitable rating insulated copper wires with lugs,
shorting link , neutral link, earth link and din bar,masking sheet,
conforming to IS 13032 & IS 8623 including making internal DB
terminations with copper lugs , testing etc. as required. Double
door (single phase) 12 Way
2.00 Each 1171.50 2343.00 INR Two Thousand Three Hundred & Forty Three Only
2.26 P&F flush/surface type enclosure for housing MCB/Isolator with
Din rail including making connections with lugs, repairs etc. as
required.With sheet steel enclosureTwo way
1.00 Each 290.00 290.00 INR Two Hundred & Ninety Only
2.27 P&F recessed/ surface mounting heavy duty Vertical type 16 SWG
sheet steel Distribution board with provision of incomer suitable for
MCB / RCCB and SP / TP MCB as outgoing , phophatised
,powder painted complete with insulated suitable rating copper
bus bar , neutral link, earth link and din bar, masking
sheet,conforming to IS13032 & IS8623 including making internal
DB terminations with copper lugs , testing etc. as required. G-
A1Double door 4 Way
2.00 Each 4990.70 9981.40 INR Nine Thousand Nine Hundred & Eighty One and Paise Forty Only
2.28 P&F recessed/ surface mounting heavy duty Vertical type 16 SWG
sheet steel Distribution board with provision of incomer suitable for
MCCB and SP / TP MCB as outgoing , phophatised ,powder
painted complete with insulated suitable rating copper bus bar ,
neutral link, earth link and din bar, masking sheet & conforming to
IS13032 & IS8623 including making internal DB terminations with
copper lugs , testing etc. as required. G-A1 Double door with
Provision of Incomer MCCB 100 / 125 A Rating 8 Way
1.00 Each 6347.00 6347.00 INR Six Thousand Three Hundred & Forty Seven Only
2.29 P & F following modular accessories made out of unbreakable and
fire retardant poly carbonate with silver contacts including making
connections testing etc. as required G-1
2.30 5 step fan regulator 2 Module 35.00 Each 460.00 16100.00 INR Sixteen Thousand One Hundred Only
2.31 Blanking plate 100.00 Each 19.00 1900.00 INR One Thousand Nine Hundred Only
2.32 SITC of quick make and quick break 4 POLE current limiting
MCCB having following current rating, short circuit breaking
capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming
to IS 60947-2 / IEC 60947-2 with front face and centralised
adjustable, line load interchangeability, having positive isolation
capability, provision for UVR , shunt trip ,earth fault trip, push (
test ) to trip , including making connections with lugs & spreaders,
etc. as required. G-1 With Thermal Magnetic release up to 100
Amp , 25 kA, fixed O/L & S/C setting
1.00 Each 4302.00 4302.00 INR Four Thousand Three Hundred & Two Only
2.33 P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1
KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I
of Group 1 of approved make in ground as per IS:1255 including
excavation of 30cmx75cm size trench, 25 cm thick under layer of
sand,IInd class bricks covering, refilling earth,compaction of earth,
making necessary connection, testing etc. as required of size.
Armoured50.0 Sq.mm 3.5 core
60.00 Rmt 299.00 17940.00 INR Seventeen Thousand Nine Hundred & Forty Only
2.34 P / L of Double wall corrugated HDPE pipe confirming to IS :
14930 P - 1 & 2 with HDPE Coupler at 1 mtr. Depth below the
ground for laying cable including making the trench and back filling
, compaction of earth as required of Gemini or IS:14930 marked
make.Outer Dia. / Inner dia. 90 /76 mm
40.00 Rmt 150.00 6000.00 INR Six Thousand Only
2.35 Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip
technology filled with anti corrosive conductive compound ( CPRI
Tested ) below the ground in 150 - 200 mm dia. earth pit &
surrounding filled with required mineral filling compound ( MFC
should have hygroscopic property to retain the moisture for long
time to create low resistance zone ) and C.C. finished chamber
covered with hinged type with locking arrangement C.I. Cover, C.I.
Frame of size 300mm x 300mm complete testing of earth
resistance as required. of following sizes. With Pipe in Pipe
Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI
CoatingGI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI
Strip
2.00 Set 6150.00 12300.00 INR Twelve Thousand Three Hundred Only
2.36 S & Laying following size earth wire/strip in horizontal or vertical
run in ground/surface/recess including riveting, soldering, saddles,
making connection etc. as required. 8 SWG G.I. ( Hot Dipped )
Wire
20.00 Rmt 9.00 180.00 INR One Hundred & Eighty Only
2.37 Making of hole in wall of required size for housing exhaust fan and
making good the same, with cement plaster as required of
following size: G-1Up to 457 mm size
6.00 Each 200.00 1200.00 INR One Thousand Two Hundred Only
2.38 P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size
130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm
length extended on each side .
35.00 Each 95.00 3325.00 INR Three Thousand Three Hundred & Twenty Five Only
2.39 P&F of Double ball bearing, capacitor start single phase metallic
blade fresh air fan, in existing opening including cost of hardware ,
flexible copper conductor ,making connections, testing etc. as
required. 225 mm sweep
2.00 Each 1614.00 3228.00 INR Three Thousand Two Hundred & Twenty Eight Only
2.40 P&F of Heavy duty capacitor start, Double ball bearing 900/1400
RPM single phase ISI marked Exhaust fan,IS:2312 marked in
existing opening including making connections testing etc. as
required. G-1 380 mm sweep(900/1400 RPM)
4.00 Each 3700.00 14800.00 INR Fourteen Thousand Eight Hundred Only
2.41 P & F extra down rod of 15 mm dia . ERW (Electrical resistance
welded ) of 1.6mm nominal thick medium duty steel pipe including
cutting, threading, drilling, fixing quarter pin etc as reqd.
34.00 Rmt 89.00 3026.00 INR Three Thousand &Twenty Six Only
2.42 P & F of Gravity Louver shutter of superior quality made out of
PVC including cost of nuts, bolts, etc as reqd.Up to 380 mm size6.00 Each 169.00 1014.00 INR One Thousand &Fourteen Only
2.43 P & F of IP20 LED batten type light fixture made from CRCA sheet
steel housing suitable for moutning LED tube system (integral
driver), Power Consumption of 18W / 36W 1500-3000 lumens,
system lumen efficiency 80 lm/Watt output, life time of 50,000
burning hours with 70% initial lumen maintained. CCT 3000°K,
4000°K & 6000°K. 4' LED Tube shape fixture 18W
30.00 Each 1800.00 54000.00 INR Fifty Four Thousand Only
2.44 S & F of Street light bracket made out from following size of ' B '
class GI pipe with heavy duty pole clamp, Saddles suitable
fastners etc. as required. 32 mm Dia.
10.00 Rmt 410.00 4100.00 INR Four Thousand One Hundred Only
2.45 P&F of IP65 protected LED Street Light Luminaire on existing
bracket. Fixture made of powder coated single piece pressure die
cast aluminum with heat dissipation fins on housing with UV
stabilized PC/Toughened Glass cover t f from 45W onwards I and
should be I secondary lens on each LED The I System level
Luminaire efficacy >=100 I with High Power LEDs of I cREE/NrCH
tA/ OSRAM/PHrLrps/sEouL I make is to be used .The LED Driver I
shall be BIS certified and Inpur Voltage I AC 1 10 to 27 0 V AC
wirh Inpur I Frequency 50Hzt 3o/o Power Factor I >0.95 Driver
Efficiency >BSo/a, THDtll I 75% .Surge protection shall be min > 5 I KV
internal and min 10 KV external. I Manufactures Word Mark/Name
I Engraved/Embossed on die cast housing to allow
traceability/authenticiry till life of fixture. Fixtures shall be CE
complianed. LED Street Light fixture 60 Watt
8.00 Each 4674.00 37392.00 INR Thirty Seven Thousand Three Hundred & Ninety Two Only
2.46 P & F of IP20 LED Recess ed / Surface Mounted, Round / Sqaure
Non- Dimmable Downlight with die-cast aluminum housing & Heat
Sink for heat dissipation, high purity reflector with external BIS
certified 2.5 KV surge B5o/o and in compliance to IEC standards.
System Lumen efficacy of >100 lm / watt and life time of minimum
35000 Burning Hours with 700/o of intial Lumen maintaned, CCT
3000"K /4000"K / 6000oK, maximum power consumption should
not more than the specified rating and Fixture shall be of CE
complianed. LED Downlight LB/20w
16.00 Each 947.00 15152.00 INR Fifteen Thousand One Hundred & Fifty Two Only
2.47 P & F of 36 Watt IP 20 LED 2'x2' fixture, Recessed / surface type,
having efficacy of not less than 100 lumen / watt, made out from
CRCA housing and with high purity/
transmisvity duffuser for uniform light distribution high efficiency
driver electronics and irr compliance to IEC standard fintegral with
light fixture) , life time of more than 50000 burnins hours, CCT
6000K fminimum], CRI>80 driver maintainine PF>0.9 Make
hilips/Surya/Bajaj/Havellis/crompton/HPL/Syska & EESL Approved
5.00 Each 3950.00 19750.00 INR Nineteen Thousand Seven Hundred & Fifty Only
2.48 P & F 1200mm sweep BEE 5 star rated double ball bearing
capacitor star! aluminium body & blade ceiling fan complying to IS
374:L979, t/p 50 watt at max speed &z3o volt, air delivery > 210
cMM, speed > 330 RPM with down rod upto 30 cm with 3 x 1.s
sqmm pvc insulated flexible copper conductor making connection
testing etc as required Make
Anmonarde/CG/Bajaj/USHA/Havllis/Polar/orient & EESL approved
35.00 Each 1370.00 47950.00 INR Forty Seven Thousand Nine Hundred & Fifty Only
2.49 SITC of 1 KVA line interactive 160-260 V 50 Hz On line UPS with
isolation trans farmer suitable for single phase AC input and single
phase AC output having enclousure degree of protection as per IS
13947 Part-1/1993/2004 complete with all protection with SMF
VRUA Make-EMER
SON/APC/LUMINOUS/SUKAM/ELNOVA/LOGICSTATE
1.00 Each 7550.00 7550.00 INR Seven Thousand Five Hundred & Fifty Only
2.50 Supplying & fixing of 150AH 12V tubular lead acid batteries on buy
back basis for repiacing the existing old batteries ( The old battery
shall be retained by contractor) Make
Exide/Amaron/Sukam/Panasonic
1.00 Each 16062.00 16062.00 INR Sixteen Thousand &Sixty Two Only
Total in Figures 8780297.86 INR Eighty Seven Lakh Eighty Thousand Two Hundred & Ninety Seven and Paise Eighty Six Only
Quoted Rate in FiguresSelect
0.00 INR Zero Only
Quoted Rate in Words INR Zero Only
Name of the
Bidder/
Bidding Firm /
Company :
NUMBER # TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
Sl.
No.
Item Description Quantity Units Estimated Rate
in
Rs. P
TOTAL AMOUNT With
Taxes in
Rs. P
TOTAL AMOUNT
In Words
1 2 3 4 5 6 7
1 Name of work : - Construction of Examination Hall at College of
Horticulture & Forestry Jhalawar
1.01 Earth work in excavation over areas (exceeding 30 cm in
depth, 1.5 Mtr. in width as well as 10 Sqm on plan)
including disposal of excavated earth lead upto 50 m
and lift upto 1.5 Mtr. disposed earth to be leveled and
neatly dressed :All kinds of soil
256.97 Cum 149.00 38288.53 INR Thirty Eight Thousand Two Hundred & Eighty Eight and Paise Fifty Three Only
1.02 Supplying and filling crusher sand including
consolidation and watering complete including all lead &
lift
350.42 Cum 413.70 144968.75 INR One Lakh Forty Four Thousand Nine Hundred & Sixty Eight and Paise Seventy Five Only
1.03 Providing and laying in position cement concrete
including curing, compaction etc. complete in specified
grade excluding the cost of centering and shuttering - All
work up to plinth level.1 : 4 : 8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 mm nominal size).
47.77 Cum 2497.00 119281.69 INR One Lakh Nineteen Thousand Two Hundred & Eighty One and Paise Sixty Nine Only
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the
Bidder Name and Values only )
Percentage BoQ
Tender Inviting Authority: ESTATE OFFICER, AGRICULTURE UNIVERSITY, KOTA
Name of Work: Construction of Examination Hall at College of Horticulture & Forestry Jhalawar
Contract No:EO/NIT No. 15-3/2018-19
Validate Print Help
1.04 Providing and laying in position specified grade of
reinforced cement concrete including curing,
compaction, finishing with rendering in cement sand
mortar 1 : 3 (1 cement : 3 coarse sand) and making good
the joints excluding the cost of centering, shuttering and
reinforcement - All work up to plinth level : 1 : 1.5 : 3 (1
cement : 1.5 coarse sand : 3 graded stone aggregate 20
mm nominal size)
77.94 Cum 4027.00 313864.38 INR Three Lakh Thirteen Thousand Eight Hundred & Sixty Four and Paise Thirty Eight Only
1.05 Centering & Shuttering with plywood or steel sheets
including strutting, propping, bracing bothways and
removal of formwork for foundations in basements rafts,
footings, strap beams bases of columns, etc. upto plinth
level.
212.66 Sqm 91.00 19352.06 INR Nineteen Thousand Three Hundred & Fifty Two and Paise Six Only
1.06 Transportation of earth including loading, unloading and
carriage complete including all lead & lift upto 2Km
/75% of excavation
192.73 Cum 56.30 10850.70 INR Ten Thousand Eight Hundred & Fifty and Paise Seventy Only
1.07 Filling available excavated earth (excluding rock) in
trenches, plinth side of foundation etc. in layers not
exceeding 20 cm. in depth, consolidating each deposited
layer by ramming and watering including lead upto 50
Mtr. and lift upto 1.5 Mtr.
256.97 Cum 49.00 12591.53 INR Twelve Thousand Five Hundred & Ninety One and Paise Fifty Three Only
1.08 Random rubble dry stone Kharanja under floor. 87.60 Cum 805.00 70518.00 INR Seventy Thousand Five Hundred & Eighteen Only
1.09 Random Rubble stone masonry for foundation and
plinth in Cement Sand mortar above 30 cm thick wall in
: Cement Mortar 1 : 6 (1-Cement : 6-Sand).
69.15 Cum 2014.00 139268.10 INR One Lakh Thirty Nine Thousand Two Hundred & Sixty Eight and Paise Ten Only
1.10 Brick masonry in foundation and plinth with Flyash
Lime Gypsum Bricks of class designation 75 as per IS
code 12894-2002 in Cement mortar 1 : 6 (1 cement : 6
coarse sand). Add extra over item No. 5.40 for Flyash
Lime Gypsum brick work in super structure upto third
storey.
102.46 Cum 3247.00 332687.62 INR Three Lakh Thirty Two Thousand Six Hundred & Eighty Seven and Paise Sixty Two Only
1.11 Half Brick masonry in foundation & plinth using Flyash
Lime Gypsum Bricks of designation 75 as per IS Code
12894-2002 Cement mortar 1 : 4 Add extra over item
No. 5.47 for half Flyash Lime Gypsum Brick masonry in
super structure upto third storey.
28.80 Sqm 413.00 11894.40 INR Eleven Thousand Eight Hundred & Ninety Four and Paise Forty Only
1.12 Reinforced cement concrete work in walls (any
thickness) including attached pilasters, buttresses,
plinth and string courses, fillets, columns, pillars, piers,
abutments, posts and struts etc. up to floor three level
including curing, compaction, finishing with rendering in
cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and
making good the joints excluding cost of centering
shuttering and reinforcement : : 1 : 1.5 : 3 (1 cement :
1.5 coarse sand : 3 graded stone aggregate 20 mm
nominal size)
13.29 Cum 4149.00 55140.21 INR Fifty Five Thousand One Hundred & Forty and Paise Twenty One Only
1.13 Reinforced cement concrete work in beams, suspended
floors, roofs, griders having slopes up to 15°, landings,
balconies, shelves, chajjas, lintels, bands, plain windows
sills, staircases and spiral staircases up to floor three
level including curing, compaction, finishing with
rendering in cement sand mortar 1 : 3 (1 cement : 3
coarse sand) and making good and joints excluding the
cost of centering, shuttering and reinforcement : 1 : 1.5 :
3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate
20 mm nominal size)
80.75 Cum 4280.00 345610.00 INR Three Lakh Forty Five Thousand Six Hundred & Ten Only
1.14 Centering & shuttering with plywood or steel sheets
including strutting, propping, bracing bothways with
wooden members and removal of formwork for
superstructure upto 4.5 m height above plinth, for :
Suspended floors, roofs landings staircases, balconies,
girders, cantilevers, bands, coping bed plates, anchor
blocks, sills, chajjas, lintel, beam etc.
541.01 Sqm 153.00 82774.53 INR Eighty Two Thousand Seven Hundred & Seventy Four and Paise Fifty Three Only
1.15 Centering & shuttering with plywood or steel sheets
including strutting, propping, bracing bothways with
wooden members and removal of formwork for
superstructure upto 4.5 m height above plinth, for :
Columns, pillars, posts and struts etc.
145.20 Sqm 211.00 30637.20 INR Thirty Thousand Six Hundred & Thirty Seven and Paise Twenty Only
1.16 Providing and fabricating reinforcement for R.C.C. work
including straightening, cutting, bending, placing in
position and binding (including cost of binding wire) all
complete up to floor three level. Thermo-mechanically
Treated bars (Tata, SAIL) 102 Kg Per Cum of Concrete
17541.96 Kg 73.00 1280563.08 INR Twelve Lakh Eighty Thousand Five Hundred & Sixty Three and Paise Eight Only
1.17 Grading roof water proofing treatment with :Cement
concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size).
11.68 Cum 3740.00 43683.20 INR Forty Three Thousand Six Hundred & Eighty Three and Paise Twenty Only
1.18 Plaster on new surface on wall in cement sand mortar
1:3 including raking of joints etc. complete fine finish :
12 mm thick
389.35 Sqm 95.00 36988.25 INR Thirty Six Thousand Nine Hundred & Eighty Eight and Paise Twenty Five Only
1.19 Plaster on new surface on walls in cement sand mortar 1
: 4 including racking of joints etc. complete fine finish :
20 mm thick
509.05 Sqm 120.00 61086.00 INR Sixty One Thousand &Eighty Six Only
1.20 Plaster on new surface on walls in cement sand mortar 1
: 6 including racking of joint etc. complete fine finished :
20 mm thick
707.72 Sqm 105.00 74310.60 INR Seventy Four Thousand Three Hundred & Ten and Paise Sixty Only
1.21 Add extra item No. 12.1 to 12.12 for plaster done over
ceiling.
389.35 Sqm 27.00 10512.45 INR Ten Thousand Five Hundred & Twelve and Paise Forty Five Only
1.22 Making grooves as per design in plaster 10 mm to 20
mm wide.
963.57 Mtr. 5.00 4817.85 INR Four Thousand Eight Hundred & Seventeen and Paise Eighty Five Only
1.23 Providing and fixing 15 to 20 mm thick Granite stone
slab mirror polished and machine edge cut in walls,
pillars, steps, Shelves, Sills Counters, Floors etc. laid on
12 mm (Av.) thick base of cement mortar 1 : 3 (1 cement
: 3 coarse sand) jointing with white cement mortar 1 : 2
(1 white cement : 2 marble dust) with pigment to match
the shade of the granite slab complete including rubbing
and polishing of : Jhanshi (Red / Choclate Colour) Above
3601 Cm2 Slabs
16.76 Sqm 2632.00 44112.32 INR Forty Four Thousand One Hundred & Twelve and Paise Thirty Two Only
1.24 Providing and fixing 1st quality standard White / Ivory
Glazed Tiles ISI marked [IS : 13753] of size 300 mm x
200 mm in walls, floors, steps, pillars etc. laid on a bed
of neat cement slurry finished with flush pointing in
white cement mixed with pigment to match the shade of
tile complete (excluding the cost of cement plaster on
walls and pillar).Catgory-I : Kajaria, Johnson, Somani
make etc.
63.00 Sqm 633.00 39879.00 INR Thirty Nine Thousand Eight Hundred & Seventy Nine Only
1.25 Providing and fixing 1st quality MAT finished ceremic tile
size 300 x 300 mm confirming to IS : 13753 colour such
as white, grey, ivory, fume red brown in walls, floors,
steps, pillars etc. laid on a bed of neat cement slurry
including nicely finished joints using water proof joint
filler powder (Untile of Roffe make) and finishing with
flush pointing in white cement mixed with pigment to
match the shade of the complete (including the cost of
cement mortor bed 1:4). Category -A : Kajaria, Jhonson,
Somani make
21.60 Sqm 656.00 14169.60 INR Fourteen Thousand One Hundred & Sixty Nine and Paise Sixty Only
1.26 Providing and fixing stone slabs table rubbed, 18-20 mm
thick in Walls, Steps, Pillars, Counters, Jambs, Shelves,
Sills etc. laid on 12 mm (Av.) thick base of CM 1:3 (1
cement : 3 coarse sand) jointing with white cement
mortar 1:2 (1 white cement : 2 marble dust) with
pigment to match the shade of the marble slab complete
including grinding, rubbing and polishing. Rajnagar 2nd
quality with light spots and streaks. Above 3601 Cm2
Slabs
8.40 Sqm 843.00 7081.20 INR Seven Thousand &Eighty One and Paise Twenty Only
1.27 Extra for providing edge moulding to 18 mm thick
marble stone counters, vantities etc. over item No. 7.1 &
7.2 including machine polishing to edge to give high
gloss finish etc. complete as per design approved by
Engineer-in-Charge. Marble work
22.00 Mtr. 99.00 2178.00 INR Two Thousand One Hundred & Seventy Eight Only
1.28 Extra for providing edge moulding to 18 mm thick
marble stone counters, vantities etc. over item No. 7.1 &
7.2 including machine polishing to edge to give high
gloss finish etc. complete as per design approved by
Engineer-in-Charge. Marble work
16.00 Mtr. 143.00 2288.00 INR Two Thousand Two Hundred & Eighty Eight Only
1.29 Extra for providing opening of required size & shape for
wash basin / kitchen sink in kitchen platform, vanit
counters and similar location in marble / stone work
including necessary holes for pillars taps etc. including
rubbing and polishing of cut edge etc. complete.
3.00 Each 22.00 66.00 INR Sixty Six Only
1.30 Providing and fixing external grade board solid core
single leaf flush door shutters ISI 2202-67 marked using
Phenol formal dehyderesin in glue both sides with
approved steel fittings complete as per annexure 'A' : 35
mm thick commercial Veneer Both side
6.62 Sqm 1974.00 13067.88 INR Thirteen Thousand &Sixty Seven and Paise Eighty Eight Only
1.31 Providing and fixing external grade board solid core
single leaf flush door shutters ISI 2202-67 marked using
Phenol formal dehyderesin in glue both sides with
approved steel fittings complete as per annexure 'A' : 19
mm thick ( for almirah shutter) commercial Veneer Both
side
6.15 Sqm 1073.00 6598.95 INR Six Thousand Five Hundred & Ninety Eight and Paise Ninety Five Only
1.32 Add extra in Flush doors : For External teak wood
lipping on flush door 35mmx6mm
24.00 Rm 55.00 1320.00 INR One Thousand Three Hundred & Twenty Only
1.33 Providing and fixing steel gate grating and grills made of
angles, tees, square bars or other flats black pipe with
holdfast and fittings complete as per design and drawing
including cutting welding and fabrication with priming
coat of red oxide.
485.00 Kg 78.00 37830.00 INR Thirty Seven Thousand Eight Hundred & Thirty Only
1.34 Steel work in built up tubular trusses including cutting,
hoisting, fixing in position and applying a priming coat
of approved steel primer, welded and bolted including
special shaped washers etc. complete above plinth level
upto 4.5 mtr height. Hot finished welded type tubes.
180.00 Kg 80.00 14400.00 INR Fourteen Thousand Four Hundred Only
1.35 Providing batta (gola) 75 mm x 75 mm in cement
concrete (1:2:4) including finishing with cement mortar
1:3 as per standard design.
86.28 Mtr 33.00 2847.24 INR Two Thousand Eight Hundred & Forty Seven and Paise Twenty Four Only
1.36 P & F 1st qualityVitrified Porcelain Polished tiles on
floor, skirting and steps etc.in different sizes (thickness
to be specified by manufactuer) with water absortion less
than 0.08% and conforming to IS 15622 of approved
make in all colour and shade, laid with 20 mm thick
CM 1 : 4 including grounting the joints with white
cement and matching pigment etc complete size 800
mm X 800 mm
366.48 Sqm 1034.40 379086.91 INR Three Lakh Seventy Nine Thousand &Eighty Six and Paise Ninety One Only
1.37 Applying priming coat : With ready mix pink or gray
primer of approved brand and manufacture on wood
work hard and soft wood.
14.55 Sqm 19.00 276.45 INR Two Hundred & Seventy Six and Paise Forty Five Only
1.38 Applying one coat of primer of approved brand and
manufacture on wall surface including all scaffolding,
(new surface) : Cement primer (on new surface).
1606.12 Sqm 15.00 24091.80 INR Twenty Four Thousand &Ninety One and Paise Eighty Only
1.39 Wall painting with plastic emulsion paint of approved
brand and manufacture to give an even shade : Two or
more coats on new work including preparation of base
with primer, putty, lippy complete in all respect. As per
internal plaster
1097.07 Sqm 62.00 68018.34 INR Sixty Eight Thousand &Eighteen and Paise Thirty Four Only
1.40 Painting with enamel paint of approved brand and
manufacture to give an even shade : Two or more coats
on new work.
14.55 Sqm 46.00 669.30 INR Six Hundred & Sixty Nine and Paise Thirty Only
1.41 Providing and fixing Staincase railing 90 cm high from
nosing of made of following specifications.50 mm outer
dia (2 mm thick) S.S. pipe hand rail.40 mm outer dia (2
mm thick) S.S. pipe baluster @ 1.00 Mtr. 4 Nos. 20 mm f
S. S pipe intermediate runners parallel to hand.S.S.
shoe 1.60 mm thick 75 mm outer dia. At each baluster
Baluster to be welded with S.S. plate 50 mm dia (3 mm
thick) anchored in C.C. block with suitable dash
fastners 50 mm dia & 2 mm thick S.S. pipe for start and
end vertical ornamental posts to be provided as per
direction of Engineer-in-charge The stainless steel work
shall be brushed steel finish with all joints/welds
properly grinded to final finish. The stainless steel shall
be 304 grade and shall confirm to relevant I.S.
15.00 Rmt. 3700.00 55500.00 INR Fifty Five Thousand Five Hundred Only
1.42 Painting with Acrylic Exterier Paint
Birla/Nerolac/Asian/Berger of Equivelant of approved
brand to give and even shade with all scaffolding two or
more coat on new work after cleaning of existing surface
complete in all respect. As per direction of Engineer in
charge.
509.05 Sqm 69.00 35124.45 INR Thirty Five Thousand One Hundred & Twenty Four and Paise Forty Five Only
1.43 Providing and fixing anodized aluminium work
(Anodizing to be got done from approved Anodizer) for
doors, windows, ventilators and partition with extruded
built up standard tubular and other sections of
approved make confirming to IS : 733 and IS : 1285
anodised transparent 81 dyed to required shade
according to IS : 1868. (Minimum anodic coating of
grade AC 15), fixed with rawl plugs and screws or with
fixing clips, or with expansion hold fasterners including
necessary filling up of gas at junctions, at top, bottom
and sides with required PVC / neoprene felt etc.;
Aluminium section shall be smooth, rust free, straight,
mitred and jointed mechanically wherever required
including cleat angle Aluminium snap beading for
glazing / paneling, C.P. brass / stainless steel screws,
Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete
as per architectural drawings and the directions of
Engineer-in-charge. (Glazing and paneling to be paid for
separately).For shutters of doors, windows & ventilators
including providing and fixing hinges / rollers etc. and
making provision for fixing of fittings wherever required
(lockes shall be paid for separately).
447.30 Kg 340.00 152082.00 INR One Lakh Fifty Two Thousand &Eighty Two Only
1.44 Providing and fixing brass lock without handle for
Aluminium door, of approved quality, make & design as
directed by Engineer-in-charge.
2.00 Each 261.00 522.00 INR Five Hundred & Twenty Two Only
1.45 Supplying and fixing fixed stainless steel wire gauge of
14 mesh x 24 gauge to the aluminium frame with
aluminium beading/channel.
17.78 Sqm 591.00 10507.98 INR Ten Thousand Five Hundred & Seven and Paise Ninety Eight Only
1.46 Provding and fixing Stainless steel gate gratting and
made of Stainless steel pipe with hold fast and fitting
and complete as per design and driwing including
cutting welding etc. The stainless steel shall be 304
grade and shall confirm to relevant I.S. Specifications.
45.90 Kg 450.00 20655.00 INR Twenty Thousand Six Hundred & Fifty Five Only
1.47 Providing and fixing glazing in aluminium door, window,
ventilator shutters and partitions etc. with PVC /
neoprene gasket etc. complete as per the architectural
drawings and the directions of engineer-in-charge (Cost
of aluminium snap beading shall be paid in basic item).
With glass panes of 5.0 mm thickness (weight not less
than 13.75 kg./sqm) as per IS : 2835.
40.14 Sqm 669.00 26853.66 INR Twenty Six Thousand Eight Hundred & Fifty Three and Paise Sixty Six Only
1.48 Providing and fixing double action hydraulic floor spring
of approved brand and manufacture to aluminium door
shutter confirming to IS : 6315 including cost of cutting
floors as required, embedding in floors and cover plate
etc. complete as per direction of Engineer-in-charge.
2.00 Each 1826.00 3652.00 INR Three Thousand Six Hundred & Fifty Two Only
1.49 P/F 1 mm thick for mica/decolam or equivalent on both
side of flush door shutters with necessary adhesive
complete in all respect.
12.77 Sqm 1050.00 13408.50 INR Thirteen Thousand Four Hundred & Eight and Paise Fifty Only
1.50 Providing & fixing Aluminium composit panel 5mm thick
by using 0.5 mm thick aluminium foil and 5mm thick
reflective glass (Sand bobin, ASHI India or equivalent),
and framing of 2mm thick aluminium section of 50x50
mm size silicon & glazing tap etc. complete, upto IIIrd
floor, Pattern as approved by Engineer in Charge.
7.88 Sqm 2800.00 22050.00 INR Twenty Two Thousand &Fifty Only
1.51 Providing and fixing of required color coated Galvalume
trapzoldal profile sheet of 0.5 mm total coated thickness
and 0.45 mm base matcrial thickness of Hi- tensil steel
with minimum 550 MPA yeild strength at all height with
all lead and lift upto pitch of 60 and as per detail
technical specification enclosed as annexure -I and
direction of engineer incharge (the mode of mearurement
for payment shall be based on finished /covered net
surface area) the quoted rates shall be the excluding the
cost of purlins, rafters and trusses etc.
31.50 Sqm 600.00 18900.00 INR Eighteen Thousand Nine Hundred Only
1.52 P & F European type white glazed vitreous china 1st
quality W.C pan (IS : 2556 Mark) with P or S trap
including cutting and making good the wall and floor.
3.00 Each 1601.00 4803.00 INR Four Thousand Eight Hundred & Three Only
1.53 Providing and fixing Water Closet Seat Covers with brass
hinges complete. '-- do -- white
3.00 Each 353.00 1059.00 INR One Thousand &Fifty Nine Only
1.54 P & F Low level Flushing Cistern of 10 litres capacity (IS :
2556mark). Of approved make with complete fittings C.I.
brackets duly painted, brass ball cock with ball, (IS:
1703 mark) complete including cutting and making good
the wall: PVC with PVC bend of make Commander
champion
4.00 Each 1246.00 4984.00 INR Four Thousand Nine Hundred & Eighty Four Only
1.55 P & F WVC wash basin (1st
quality, I.S. : 2556 Mark) of
approved make with C.I. brackets duly painted, 1 No. 15
mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P.
brass waste coupling of approved make, 25 mm G.I.
waste pipe complete including cutting & making good
the wall.: 460 dia for counter top.
4.00 Each 2240.00 8960.00 INR Eight Thousand Nine Hundred & Sixty Only
1.56 P & F Bottle Trap of approved make: C.P Brass 32 mm 4.00 Each 425.00 1700.00 INR One Thousand Seven Hundred Only
1.57 Providing and fixing Beveled edge Mirror of special glass
of approved make (Atul / equivalent) complete with 6
mm thick asbestos cement sheet ground fixed to wooden
screws & washers. Other Size
5.94 Sqm 1075.00 6385.50 INR Six Thousand Three Hundred & Eighty Five and Paise Fifty Only
1.58 P & F Toilet Shelf of approved quality/make: Synthetic
Material with tumbler of approved quality/make size 470
x 114 x 36mm
4.00 Each 327.00 1308.00 INR One Thousand Three Hundred & Eight Only
1.59 P & F Toilet Shelf of approved quality/make: Acrylic
shelf on C.P. brass casted brackets & guard rail of
approved make as per direction of EI of size
550x125mm
4.00 Each 755.00 3020.00 INR Three Thousand &Twenty Only
1.60 Glass Shelf with edges rounded off Anodised Aluminium
angle frame & C.P. brass brackets & guard rail size
600x120mm
4.00 Each 273.00 1092.00 INR One Thousand &Ninety Two Only
1.61 P & F Grating of approved quality/make: Synthetic
Material(PTMT) of approved quality/make size 125mm
dia
2.00 Each 65.00 130.00 INR One Hundred & Thirty Only
1.62 P & F Tooth Paste & Brush Holder of approved
quality/make: Stainless Steel
4.00 Each 215.00 860.00 INR Eight Hundred & Sixty Only
1.63 Providing and fixing Toilet Paper Holder with rod of
approved quality / make.C.P. Brass (Heavy & Superior
Quality)
2.00 Each 405.00 810.00 INR Eight Hundred & Ten Only
1.64 P & F Twin- peg of approved quality / make Acrylic 4.00 Each 51.00 204.00 INR Two Hundred & Four Only
1.65 P & F Shower arm 15mm dia of approved quality/make.
(-do-) size 370mm.(-do-)
1.00 Each 252.00 252.00 INR Two Hundred & Fifty Two Only
1.66 P & F Bath Shower of approved quality/make. C.P. brass
of Heavy & superior quality 150mm.
1.00 Each 253.00 253.00 INR Two Hundred & Fifty Three Only
1.67 P & F Extension Pipe for bib cocks of approved
quality/make. (-do-) 100 X 15mm.
6.00 Each 94.00 564.00 INR Five Hundred & Sixty Four Only
1.68 Providing and fixing Jet Spray for water closet with C.P.
Copper Tube flange of approved make
3.00 Each 266.00 798.00 INR Seven Hundred & Ninety Eight Only
1.69 P & F Bib