Upload
vfq3481
View
215
Download
2
Embed Size (px)
DESCRIPTION
Flyer AGFA do equipamento de revelação Classic EOS/Development equipment from AGFA
Citation preview
CLASSIC E.O.S. PROCESSOR
The Classic E.O.S. processor is a
standard darkroom high throughput
processor.
The small footprint and standard
connections make it easy to install.
Agfas renowned E.O.S. guarantees
you environmentally safe operation.
Reduced chemical costs and 60 s high throughput (HT)
Reduced chemical costs and increased productivity
The Classic E.O.S. processor combines high throughput with reduced chemical costs. With Agfas unique Ecologically Optimized System approach, the Classic E.O.S. processor allows you to comply with ecological standards while reducing fixer consumption, silver content in the wash water and water consumption.
New cascade fixing approach for more savings
Using two fixer tanks between the developer tank and wash tank, the Classic E.O.S. processor reduces the silver content in the washing water at regular water consumption rates to 1 ppm, and to 50 mg/m at reduced water consumption rates. Fixer replenishment is reduced by 35 %, as is the fixer waste and water consumption. This entails a significant reduction of costs. Added savings are yielded because no additional peripherals are needed to comply with most existing and pending legislation. This means no extra investments, floor space, maintenance or repair costs.
High-throughput 60 s processor - the standard darkroom pro-cessor
The HT processing cycle of 60 seconds of the Classic E.O.S. processor offers you very short access time for ready-to-read film. This high throughput results in increased time for patient care and more time for diagnosis. Using standard chemicals, the Classic E.O.S. processor has a capacity of 220 35 x 35 cm films per hour.
The Classic E.O.S. processor also has an intermediate processing cycle of 90 seconds in which 150 35 x 35 cm films can be processed, and
Ideal for fast processing and when a high capacity is needed
No legislative worries: in compliance with all ecological standards
Easy to operate with its user-friendly multilingual control panel
60-second high throughput processing cycle
Easy installation with no extra costs: Standard power and water connections
Flexible darkroom installation: inside or outside the darkroom
Dev. Fix1 Fix2 Wash
Replenishment
when set to a processing cycle of 120 seconds, it still has a capacity of 110 35 x 35 cm films per hour.
User-friendliness
The Classic E.O.S. processors functions are microprocessor-controlled. Its user-friendly control panel has an interactive 2 x 16 digit LCD display (12 languages).
The Classic E.O.S. processor offers you the very best in processing technology. Its infrared drying modules provide superior drying performance and generate low heat so as not to disturb the working environment.
Easy installation
As a result of its low power consumption, the Classic E.O.S. processor only requires a 15/16 A wall outlet. Besides, the Classic E.O.S. processor is a standard darkroom processor and can be incorporated in the darkroom just the way you want.
Technical specifications
Dimensions (l x w x h)
74 x 71 x 113 cm (29 x 28 x 45 in)
Length with feed table and receiving tray: 127 cm (50 in)
Weight
Empty: 135 kg (297 lbs)
When filled: 165 kg (364 lbs)
Tank capacities (with racks)
Developer tank:8.8 l (2.3 gal)
Fixer tank 1:10 l (2.6 gal)
Fixer tank 2:5.8 l (1.5 gal)
Wash tank:5.8 l (1.5 gal)
Processing cycles
HT processing: 72 s
IP processing: 107 s
RP processing: 142 s
Capacity (35 x 35 cm film size)
HT processing: 220 films per hour
IP processing: 150 films per hour
RP processing: 110 films per hour
Film sizes
Min. size: 10 x 10 cm (4 x 4 in)
Max. film width: 43 cm (17 in)
No roll film
Drying System
Infrared + hot air
Accessories
Water pressure reduction
Replenisher tanks: 2 x 30 l (2 x 8 gal)2 x 80 l (2 x 21 gal)
Chemix
CURIX E.O.S. Fix
Power supply
200 240 V, 50/60 Hz
15/16 A
Power consumption at room temperature
In stand-by: max. 0.45 kWh
In operation: max. 2.9 kWh
Water consumption
No water consumption in stand-by
Adjustable water consumption, adjustable to your local requirements.Max. 3 l/min.
Room conditions
Relative humidity: 10 80 %
Room temperature: 10 30 C (50 - 86 F)
Noise level
Max. 48 dB (A) during film processing
Max. 35 dB (A) in stand-by
(ISO standard 7779)
Safety
This processor complies with the safety regulations EN 60950: 1997 (IEC 950) and EN 60601-1-1-2: 1993, UL 1950 and CSA C22.2 nr. 950. The processor complies with the following regulations on radio interference suppression: EN 50081-1, EN 55011 and FCC 47, Part 15, Chapter B, Class A. The non-return water connection complies with the standard DIN 1988. The unit is supplied with the TV label and CE label for medical devices.
The data in this publication are for illustration purposes only and do not necessarily represent standards or specifications which must be met by Agfa. Characteristics of the products described in this publication can be changed at any time without notice.
Agfa, the Agfa rhombus, Point of Knowledge and CURIX are trademarks of Agfa-Gevaert N.V., Belgium, or its affiliates.
Printed in BelgiumPublished by Agfa-Gevaert N.V.B-2640 Mortsel - BelgiumNEVAH GB 00200304 V01
Agfa-Gevaert has been awarded the ISO 9001 Certificate by Lloyds Register Quality Assurance for the design, development, procurement and/or production, marketing and servicing of imaging and communication systems for medical applications. A high consistency of products is thereby provided.
Agfa-Gevaert has been awarded the Approval of Conformity Certificate by Lloyds Register Quality Assurance. It certifies that the Quality Management System meets the requirements of the Medical Devices Directive 93/42/EEC.