AFS PRO 700 - Boekemans€¦ · Restore AFS Software Written Data onto Pro 700 This will enable you to download onto your Pro 700 screen your updated run lines, boundaries and management

AFS PRO 700

Pre Harvest / Seeding Data Delete and Software Import

Prepared By Boekeman Machinery Precision Farming Team

Boekeman Machinery PRO 700 Essentials Page 2 of 12

Table of Contents

Before You Start........................................................................................................... 3

Backup and Upload Data onto AFS Software ................................................................. 4

Delete Data (Grower) off Pro 700 .................................................................................. 7

Restore AFS Software Written Data onto Pro 700......................................................... 10

Precision Farming Contacts ........................................................................................ 12

Boekeman Machinery PRO 700 Essentials


Before You Start

These instructions are for users who use AFS Software. Please otherwise disregard and refer to your Essentials Support Guide.



Backup and Upload Data onto AFS Software

Backing-up configurations and data will save the following;

Run Screens

Yield, Coverage and Machine Data

Client, Farm, Field & Events

Run Lines and Boundaries

Other Display and Guidance Settings

1. BACKUP OF RUN SCREENS

Backing up your Run Screens allows you to; - Transfer Identical Run Screens to other Pro 700 Screens - Backup before USB is formatted or Screen is updated

Step 1: Turn on Machine to Power on Pro 700 with original Case IH Approved USB Step Two: Ensure the Run Screens are on the Pro 700 in the order and format you require Step Three: Turn off Machine to Power off Pro 700 screen Step Four: Once powered off, take out original Case IH USB and insert NEW BLANK

Step Five: Turn on the Machine once again. Once the screen has powered on, it will save all the run screens onto the USB Step Six: Turn off Machine key to Power off Pro 700 screen and once the Pro 700 has powered off, take out the USB THIS USB WILL NOW HAVE THE BACKUP OF ALL RUN SCREENS

Step Seven: Allow precision farming specialists to conduct work on the screen and/or upload new software onto USB (from AFS Software) Step Eight: Once service is complete, use the Backed up USB to upload all Run Screens on the Pro 700 screen. Note: Where Pro 700 has been updated, the original Case IH USB can be inserted, where

the Run Screen will show. Note: Where the original Case IH USB has been formatted to upload new software onto

the screen, the backed up USB should be used to restore the Run Screens

2. BACKUP OF DATA

Before backing-up, ensure that your current Case IH USB is in the screen and it has all

configurations correct and current saved onto the USB. When satisfied with configurations, power off the PRO 700 and ONLY once powered off,

take out the USB. With this USB, insert into a computer, and then copy all files from the USB onto the computer OR another BLANK USB.



Open up My Computer

In the USB, Right Click on the File and Select Copy

In your computer Paste the file (In a Folder

Eg Named Harvest 2015)

3. UPLOAD ONTO AFS SOFTWARE (READ JOB DATA)

Follow the following steps to successfully import your data from USB onto the AFS Software. This allows you to;

- Review Management Trees - View Yield Data - Ability to draw Variable Rate Prescription Maps



Open the Software and Select a Current or New Project

Select Read Job Data to Import the Data

Browse and Select the folder where the

information is This is where you made your backup

Items should show up as seen in this picture. Once confirmed, Click Okay to Import



Deleting Data (Grower) Off Pro 700

You will need to Delete the Coverage Logging on your PRO 700 where using the AFS Software as the AFS Software Written Job will be the only data required on the Pro 700 screen. If you are using the recorded information for mapping (variable rate), etc make sure that you have downloaded and backed up this data and saved on a computer or another

USB before deleting the coverage.

Press on the Data Management Icon

On the bottom of the screen, Press the Delete button



Press the Data Type

Press on the Grower

On the Grower Tab, Select the Grower you would like to delete and select Enter



Press Delete and follow the prompts



Restore AFS Software Written Data onto Pro 700

This will enable you to download onto your Pro 700 screen your updated run lines, boundaries and

management tree.

Select Write Job Data to Import the Data

Ensure you Select the correct Screen the

data will be imported onto EG. AFS Pro 700 Select the File Location (Being the Case IH

USB) Ensure the USB is Blank

This screen will now appear The Data has now successfully saved onto the USB



Insert this USB back into the Pro 700 to restore all Data. Note: Please ensure you load your Run Screens with the subsequent USB prior to doing this to ensure these Run Screens are uploaded as well.



Precision Farming Contacts

Matthew Joyner Dalwallinu 0437 611 725 [email protected]

Peter Crippen Dowerin 0427 084 212 [email protected]

Grainne Rooney Northam 0458 440 715 [email protected]

Conor McGuckian Northam 0475 961 120 [email protected]

Ben Boekeman Wongan Hills 0475 969 169 [email protected]

Paymon Ghassemi Wongan Hills 0477 740 707 [email protected]

For latest information, downloads and news visit the Boekeman Machinery Website www.boekemans.com.au

http://www.boekemans.com.au/

Documents

AFS PRO 700 - Boekemans€¦ · Restore AFS Software Written Data onto Pro 700 This will enable you to download onto your Pro 700 screen your updated run lines, boundaries and management