Aesv

7/26/2019 Aesv

1/32

AESV / AESU / AESV-LA Series

Squirrel Cage Induction Motor

AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY

AESV2S / AESU2S / AESV2S-LA (IE2) HIGH EFFICIENCY

AESV3S / AESU3S / AESV3S-LA (IE3) PREMIUM EFFICIENCY

7/26/2019 Aesv

2/32

Prole

ContentCompany Prole P1

Introduction P1-2

Design Specication P2-3

IE1 Performance Data P4P8

IE2 Performance Data P9 P12

IE3 Performance Data P13-P16

Dimension Drawing B3 P17-P20

Dimension Drawing V1 P21-P24

Dimension Drawing B35 P2528

Useful Formula P29

Enquiry Form P30

About TECOTECO Singapore provides a total solution of motors anddrives ever since it was established in 1972.TECO Westinghouse Motor Company comprises the

experience of Westinghouse, a leader in the motor industrysince 1888 and TECO, a multinational conglomerate withover 50 years of motor experience. TECO Singapore itselfwas established in 1972 and has also set-up subsidiaries inThailand, Malaysia, Indonesia, Vietnam and India.

By realizing the potential for precision products, especially inelectronic and electrical equipment, TECO embarked afoothold in Singapore and becomes a hub for manufacturingand distribution of Electric Motors for the entire South-EastAsia since 1972. TECO Singapore has established overseasmanufacturing facilities and ofces in Thailand, Malaysia,Indonesia, Vietnam and India.

Today, TECO is the one of the top 5 motor manufacturers inthe world. Our motors are widely deployed in the industrialsectors and government projects including Singapore MassRapid Transit (SMRT), Land Transport Authority (LTA), PublicUtilities Board (PUB), Housing Development Board (HDB)and Jurong Town Council (JTC) and Changi Airport.

Introduction to IEC 60034-30-1

Electric motor application in the industry consumes between 30% and 40% of the generated electrical energyworldwide. Improving efciency of the complete drive system is therefore a major concern in the energy-efciencyefforts. Many different energy efciency standards for cage induction motors from different countries were alreadyin use (NEMA, EPACT, CSA, CEMEP, COPANT, AS/NZS, JIS, GB and others) before IEC came up with an efciencystandard. It became increasingly difcult for manufactures to design motors for a global market and for customers tounderstand differences and similarities of standards in different countries, therefore IEC 60034-30-1 was developedfor global standards for easy reference.

IEC 60034-30-1: Efciency classes of single-Speed, Three Phase, Cage-induction motor (IE-code)

As part of a concerted effort worldwide to reduce energy consumption, CO2 emissions and the impact of industrialoperations on the environment, TECO is committed to produce International Energy-Efciency Class (IE) motors inorder to reduce the energy consumed and in turn reduce greenhouse gas emissions. TECOs V-series are designed,manufactured and tested to meet latest European and International standard. The New V Series, which comprise offull range of Efciency Classes IE1, IE2 & IE3 Motors.

What does this standard covers?

It species efciency classes for single-speed, three-phase, 50Hz and 60 Hz, cage-induction motors that have:

Rated Voltage up to 1000V; Rated Output Power between 0.12kW and 1000kW; Either 2, 4, 6 or 8 pole; Rated either duty type S1 (continuous duty) or S3 (intermittent periodic duty) with a rated cycle duration

factor of 80% or higher; Capable of operating direct on-line; Rated for operating conditions in accordance with IEC 60034-1, clause 6.

1

7/26/2019 Aesv

3/32

CEMEP (SS530)

Before this standard was published, IEC design motors mostly follow CEMEP-EU standard for efciency classication,which is known as EFF2 (Standard Efciency) or EFF1 (High Efciency). The agreed minimum levels of the respectiveclasses are based on efciency measurements according to old EN 60034-2:1996.

SS530 is the standard used in Singapore, SS530 dene the usage of the motor into two categories: Continuoususe & Occasional used. The denition of the Continuous Use is that a motor is used more than 2900 Hours a year,and Occasional Use is less than 2900 hours a year. For Continuous Use motor must meet a minimum nominalefciency equivalent to CEMEP EFF 1 and Occasional Use motor must meet a minimum nominal efciency equivalentto CEMEP EFF2.

CEMEP VS IEC 6003430-1

The method for measuring efciency for low-voltage three phase asynchronous motor was revised with the newEN 60034-2-1:2007 standard. The new standard signicantly increases the accuracy under dened laboratoryconditions. IEC 60034-30, is based on the new 60034-2-1: 2007 standard for the denition of efciency. Where elseCEMEP, was based on the previous EN 60034-2:1996. In a direct comparison of the both measuring methods at thesame motor, it is expected the efciency level determine according to the new method are up to a few percentagepoint below the efciency level using the old method.

Electrical Design

Type: Squirrel Cage Induction MotorRatings: 0.18 kW ~ 375 kW

Duty RatingAll Motors have a maximum continuous duty rating of S1under rated load. For duty cycles other than S1 pleaserefer to TECO.

Supply Voltage

Stock motors are designed for operation as below:2.2kW and below : 220~240V/ 380~415V 3 phase /50Hz3 kW and above : 380~415V 3 phase /50Hz

Insulation System

All motor are design with class F insulation and Class B

temperature rise at ambient temperature of 40 C. Forany other insulation system other than standard Class Finsulation or Class B temperature rise at higher ambienttemperature than standard 40 C, please refer to TECO.

Inverter Duty

All motors are design to be suitable for Inverter use,comply with IEC 60034-17. For intensive use of Inverterduty operations complying to IEC60034-25, please referto TECO.

Standards

IEC 60034-1 Rotating electrical machines - Part 1:Rating and performance.

IEC 60034-2-1 Rotating electrical machines - Part 2-1:Standard methods for determining losses and efciencyfrom tests

IEC 60034-5 Rotating electrical machines - Part 5:Degrees of protection provided by the integral design of

rotating electrical machines (IP code) - classication.

IEC 60034-6 Rotating electrical machines - Part 6:Methods of cooling (IC code).

IEC 60034-7 Rotating electrical machines - Part 7:Classication of types of enclosures and mountingarrangements (IM code).

IEC 60034-8 Rotating electrical machines - Part 8:Terminal markings and direction of rotation.

IEC 60034-9 Rotating electrical machines - Part 9:Noise limits.

IEC 60034-11-1 Rotating electrical machines - Part 11-1:Thermal protection.

IEC 60034-12 Rotating electrical machines - Part 12:Starting performance of single-speed three-phase cageinduction motors.

IEC 60034-14 Rotating electrical machines - Part 14:Mechanical vibration of certain machines - Limits ofvibration.

IEC 60034-17 Rotating electrical machines - Part 17:Cage induction motors when fed from converters -Application guide.

IEC 60034-30-1 Rotating electrical machines - Part 30:Efciency classes for single-speed three-phase cageinduction motors.

Efciency CEMEP IE Model

Standard EFF2 IE 1 AESV1S/AESU1S

High EFF1 IE 2 AESV2S/AESU2S

Premium - IE 3 AESV3S/AESU3S

2

7/26/2019 Aesv

4/32

Star-Delta

Connect U1,V1,W1,U2,V2 & W2 to Star-Delta starter panel.

Power supply Voltage (L1,L2,L3) to be connected to voltage

indicated in Delta configuraon column on the motor

nameplate.

Connec&on DiagramDirect-On-Line

For motor rang 2.2kW and below:Low Voltage : 220~240V

High Voltage : 380~415V

For motor rang 3kW and above:Low Voltage : 380~415

Specication

Mechanical Design

Type: Squirrel Cage Induction MotorFrame Size: 80M to 355CEnclosure: Totally Enclosed Fan Cooled (TEFC), Totally

Enclosed Non Ventilated (TENV)

Ingress Protection

Stock motors are design to meet Ingress Protection ofIP55, other special requirement please refer to TECO.

Drive Method

Stock motors are design for both Direct Coupling andBelt Drive use from frame size 80M to 250M. However,for 2 Pole Motor design for both Direct coupling and Beltdrive is from Frame size 80M to 200L only. For belt driveapplication for other frame size, please refer to TECO.

Bearings

High Quality Deep Groove Ball Sealed Bearings are usefor our stock motor from frame size 80 to 225M andVacuum De-Gassed High Quality Deep Groove Ball OpenBearings are use for stock motor from frame Size 250Mto 355C. Any special bearings, please refer to TECO.

Lubrication

Both our sealed and open type bearing are greaselubricated.

Construction

Frame: High Grade Cast IronEnd Bracket: High Grade Cast IronExternal Fan: PolypropyleneFan Cover: Pressed SteelShaft: Carbon SteelLead: 6 LeadsIron Core: High Grade, Insulated, Cold Rolled, Electro-

Magnetic Steel Plate

Terminal Box

Stock motor are tted with pressed steel T-Box for Frame

80M to 180M and Cast Iron T-Box for frame 200L to355M. T-Box are designed for provision of rotation by90 to every direction that enable cable entry from 4

directions.

Finishing

Stock motor are completed with Phenolic Rust Proof BasePlus Lacquer Surface Finished Painting as standard:Gray Color ( Munsell 7.5B 3.5/0.5 ) (IE 1)Blue Color ( Munsell 5PB 3/8 ) (IE 2)Green Color ( Munsell 7.5GY 4.5/3.5 ) (IE 3)Any other colour nishing, please refer to TECO.

Optional Accessories

Thermal Protection Accessories

ThermistorsResistance Temperature Detectors (RTD)Thermostat

Moisture Protection Accessories

Space Heater

Lifting Device

All motor from Frame Size 90 and above comes with dual

eye bolt for lifting purposes.

Standards

IEC 60072-1 Dimensions and output series for rotatingelectrical machines - Part 1: Frame numbers 56 to 400and flange numbers 55 to 1080.

Special Enhancement

The following enhancement are also available.Please refer to TECO.

IP 56 Class H Insulation Inverter Duty Wire Special Paint Finishes Special Shaft Extensions Dual Speed Smoke Spill Duty Stainless Steel Hardware Conversion of sealed bearing to open bearing

3

7/26/2019 Aesv

5/32

Performance

IE 1

Performance Data

4

7/26/2019 Aesv

6/32

Performance

IE 1 Performance Data (2 Pole)

Motor Type AESV1S / AESU1S / AESV1S-LA

Note:1. The above are typical values based on test according to IEC 60045-2-1:2007. (DY)2. Tolerance according to IEC 60034-1.3. Breakdown & Locked rotor torques are show as average expected voltages4. Efficiency, power factor, speed and torque are the same for other voltages. Current values vary inversely with voltage5. Output in ( ) is for Optional Frame size upon request6. Frame size 315C, 315D & 355C: only suitable for IM B3 and IM B5

7. Noise according to IEC 60034-9.8. Data subject to change without prior notice.

EFFICIENCY POWER FACTOR TORQUE

FULL LOAD (A) LRC

VOLTAGE (A)

rpm (%) (%) (%) (%) (%) (%) 380 400 415 400V kg-m %FLT %FLT %FLT kg-m2 kg

0.75 1 2800 80M 72.1 71.6 68.8 88.0 81.0 68.0 1.80 1.71 1.64 11 0.261 235 210 255 0.005 16.5

1.1 1.5 2810 80M 75.0 75.9 74.5 87.5 81.0 70.0 2.55 2.42 2.33 17 0.381 265 235 290 0.006 18.0

1.5 2 2850 90S 77.2 77.2 75.3 88.0 82.0 70.5 3.35 3.19 3.07 21 0.512 225 210 290 0.010 23.0

2.2 3 2855 90L 79.7 80.7 79.7 89.0 84.0 74.0 4.71 4.48 4.31 33 0.750 240 230 310 0.013 27.0

3 4 2890 100L 81.5 82.0 80.5 89.0 85.0 76.0 6.28 5.97 5.75 50 1.010 215 195 280 0.022 37.5

3.7 5 2880 112M 82.6 83.6 81.6 90.0 87.0 79.0 7.56 7.18 6.92 62 1.250 240 180 320 0.042 47.5

4 5.5 2910 112M 83.1 84.1 83.1 90.5 87.5 79.5 8.08 7.68 7.40 67 1.337 200 170 325 0.042 47.5

5.5 7.5 2900 132S 84.7 83.7 81.3 88.0 85.5 79.0 11.2 10.7 10.3 69 1.845 170 150 235 0.057 61.07.5 10 2895 132S 86.0 86.0 84.5 82.0 80.0 76.0 16.2 15.4 14.8 91 2.521 170 145 225 0.063 65.0

11 15 2945 160M 87.6 87.6 85.6 89.0 85.5 77.5 21.4 20.4 19.6 176 3.634 225 140 280 0.154 105

15 20 2940 160M 88.7 89.2 88.2 91.0 90.0 85.5 28.2 26.8 25.9 210 4.964 220 135 260 0.192 120

18.5 25 2940 160L 89.3 89.8 89.3 92.0 90.0 85.5 34.2 32.5 31.3 291 6.123 270 190 310 0.237 135

22 30 2945 180M 89.9 89.9 88.9 90.0 88.0 83.5 41.3 39.2 37.8 314 7.269 220 175 280 0.283 175

30 40 2955 200L 90.7 90.2 87.7 84.5 79.0 71.0 59.5 56.5 54.5 441 9.878 185 140 275 0.521 240

37 50 2955 200L 91.2 91.2 90.2 88.5 87.0 81.0 69.6 66.2 63.8 527 12.18 195 135 270 0.633 270

45 60 2955 225MA 91.7 91.2 89.7 91.5 90.0 86.0 81.5 77.4 74.6 600 14.82 150 130 260 1.074 315

55 75 2970 250MA 92.1 92.1 91.1 91.0 90.0 85.5 99.7 94.7 91.3 697 18.02 135 115 295 1.211 405

75 100 2970 280SA 92.7 92.7 91.4 87.0 85.0 80.0 141 134 129 966 24.57 130 120 260 1.759 51590 125 2965 280MA 93.0 92.8 91.9 87.0 84.0 76.5 169 161 155 1157 29.53 140 120 290 2.023 552

110 150 2970 315SA 93.5 93.5 92.8 89.0 87.0 81.0 201 191 184 1330 36.09 135 115 230 3.600 800

132 175 2970 315MA 93.7 93.7 93.0 89.5 88.5 83.5 239 227 219 1570 43.31 145 120 230 4.400 900

(160) (215) 2970 315MA 94.0 94.0 93.2 91.5 90.5 86.0 283 269 259 2050 52.50 210 175 240 5.200 950

160 215 2970 315LA 94.0 94.0 93.2 91.5 90.5 86.0 283 269 259 2050 52.50 210 175 240 5.200 980

200 270 2970 315LA 94.0 94.0 93.4 92.0 91.0 87.5 351 334 322 2500 65.62 210 175 240 6.400 1100

(220) (300) 2970 315CA 94.4 94.0 92.8 90.5 89.0 83.5 391 372 358 2800 72.18 150 125 270 7.200 1380

220 300 2975 355MA 94.5 94.0 93.0 90.0 88.0 81.0 393 373 360 2840 72.06 140 115 280 10.40 1550

(250) (335) 2972 315CA 94.6 94.1 93.0 92.0 91.0 87.5 436 415 400 3100 81.97 150 125 270 8.400 1500

250 335 2978 355MA 94.6 94.2 93.3 91.0 89.0 83.5 441 419 404 3180 81.81 150 125 280 12.00 1650(315) (420) 2975 315DA 94.8 94.4 93.5 92.5 91.5 88.0 546 518 500 3900 103.2 160 130 280 10.40 1720

315 420 2978 355LA 94.8 94.4 93.5 91.5 90.0 86.0 552 524 505 3900 103.1 150 125 280 14.00 1900

375 500 2980 355CA 94.8 94.8 93.7 92.0 90.5 86.5 653 621 598 4500 122.6 150 125 280 12.40 2340

kW HP

3/4

LOAD

1/2

LOADFULL

LOAD

FULL

LOAD

OUTPUTCURRENT

FULL

LOAD FRAME

SIZE

3/4

LOAD

1/2

LOAD

FULL

LOADAPPROX.

WEIGHT

LOCKED

ROTOR PULL-UP

BREAK-

DOWN

ROTOR

GD2

5

7/26/2019 Aesv

7/32

Performance






FULL LOAD (A) LRC

VOLTAGE (A)


0.55 0.75 1425 80M 70.0 68.9 62.1 73.0 62.5 50.0 1.64 1.55 1.50 9.0 0.376 220 200 265 0.007 15.0

0.75 1 1425 80M 72.1 71.6 68.3 77.0 66.0 52.5 2.05 1.95 1.88 12 0.512 240 215 275 0.009 16.5

1.1 1.5 1425 90S 75.0 75.0 68.1 79.0 68.5 55.5 2.82 2.68 2.58 17 0.751 220 165 235 0.014 22.0

1.5 2 1425 90L 77.2 77.2 74.2 81.0 72.5 59.0 3.64 3.46 3.34 23 1.024 230 175 240 0.017 24.0

2.2 3 1435 100L 79.7 79.7 77.2 79.5 71.0 57.0 5.28 5.01 4.83 39 1.492 210 185 300 0.033 32.0

3 4 1445 100L 81.5 80.9 77.5 85.0 76.0 63.0 6.58 6.25 6.02 52 2.020 250 180 300 0.046 37.5

3.7 5 1445 112M 82.6 82.6 80.6 82.0 74.5 64.0 8.30 7.88 7.60 62 2.491 220 180 290 0.059 44.5

4 5.5 1445 112M 83.1 83.6 81.7 82.0 76.0 64.0 8.92 8.47 8.17 60 2.693 190 180 260 0.065 47.5

5.5 7.5 1465 132S 84.7 84.7 83.2 82.5 75.5 63.5 12.0 11.4 11.0 86 3.653 235 190 315 0.103 64.0

7.5 10 1460 132M 86.0 86.5 85.0 86.0 81.5 71.5 15.4 14.6 14.1 109 4.998 215 175 295 0.133 78.0

11 15 1465 160M 87.6 88.1 87.1 86.5 82.5 74.5 22.1 21.0 20.2 155 7.306 200 150 255 0.271 105

15 20 1465 160L 88.7 88.7 87.2 86.0 80.5 71.0 29.9 28.4 27.4 217 9.962 215 155 265 0.396 130

18.5 25 1475 180M 89.3 89.3 88.8 86.0 83.5 76.5 36.6 34.8 33.5 220 12.20 165 125 220 0.611 175

22 30 1475 180L 89.9 89.9 88.9 84.0 80.5 72.5 44.3 42.0 40.5 299 14.51 195 150 230 0.712 190

30 40 1475 200L 90.7 91.2 90.7 86.5 83.5 76.5 58.1 55.2 53.2 444 19.79 240 185 275 1.220 255

37 50 1480 225SC 91.2 90.7 89.7 85.0 81.5 74.5 72.5 68.9 66.4 489 24.33 190 160 245 1.649 315

45 60 1475 225MC 91.7 92.2 91.2 85.5 83.0 76.5 87.2 82.8 79.8 523 29.68 175 145 220 1.731 330

55 75 1485 250MC 92.1 92.1 91.1 87.0 85.0 79.5 104 99.1 95.5 714 36.04 220 110 230 2.755 450

75 100 1480 280SB 92.7 92.7 92.2 84.5 81.0 73.5 145 138 133 948 49.31 175 165 275 4.224 566

90 125 1480 280MB 93.0 93.2 92.5 85.5 82.5 72.5 172 163 157 1164 59.17 175 165 270 4.943 624

110 150 1480 315SB 93.5 93.5 92.9 86.5 83.5 75.5 207 196 189 1330 72.43 190 155 250 7.200 800

132 175 1480 315MB 93.7 93.7 93.2 86.5 83.0 74.5 247 235 227 1570 86.91 200 165 250 8.400 900

(160) (215) 1482 315MB 94.0 94.0 93.4 87.5 84.5 77.0 296 281 271 2000 105.2 200 165 250 10.00 960

160 215 1482 315LB 94.0 94.0 93.4 87.5 84.5 77.0 296 281 271 2000 105.2 200 165 250 10.00 990

200 270 1482 315LB 94.0 94.1 93.6 88.5 86.0 79.0 365 347 334 2500 131.5 210 175 250 13.20 1160

(220) (300) 1484 315CB 94.5 94.5 93.7 89.5 88.0 82.5 395 375 362 2840 144.5 200 165 250 19.20 1420

220 300 1486 355MB 94.5 94.3 93.4 87.8 85.0 78.4 403 383 369 2750 144.3 180 160 250 20.40 1550

(250) (335) 1485 315CB 94.6 94.5 93.8 89.5 87.5 82.0 449 426 411 3150 164.1 200 165 260 21.20 1500

250 335 1486 355MB 94.6 94.4 93.8 88.0 85.5 78.0 456 433 418 3150 163.9 190 155 270 23.20 1650(315) (420) 1485 315DB 94.9 94.9 94.4 90.0 88.0 82.5 560 532 513 4100 206.7 200 165 260 26.40 1780

315 420 1486 355LB 94.9 94.8 94.3 88.8 86.3 79.5 568 540 520 3900 206.6 200 165 270 28.80 1900

375 500 1486 355CB 94.9 94.9 94.4 89.5 88.0 82.0 671 637 614 4500 245.9 200 165 270 34.80 2340

kW HP

3/4

LOAD

1/2

LOADFULL

LOAD

FULL

LOAD

OUTPUTCURRENT

FULL

LOAD FRAME

SIZE

3/4

LOAD

1/2

LOAD

FULL

LOADAPPROX.

WEIGHT

LOCKED

ROTOR PULL-UP

BREAK-

DOWN

ROTOR

GD2

6

7/26/2019 Aesv

8/32





Performance


FULL LOAD (A) LRC

VOLTAGE (A)


0.55 0.75 915 80M 67.5 67.0 62.0 72.0 60.5 48.0 1.72 1.63 1.57 8.0 0.585 220 210 225 0.012 18.0

0.75 1 935 90S 70.0 67.2 62.9 71.0 60.5 48.0 2.29 2.18 2.10 11 0.780 190 175 285 0.017 24.0

1.1 1.5 935 90L 72.9 71.0 66.1 68.5 57.0 44.5 3.35 3.18 3.06 17 1.145 220 205 260 0.023 27.5

1.5 2 935 100L 75.2 75.2 69.8 75.0 65.0 52.0 4.04 3.84 3.70 21 1.561 200 170 235 0.035 31.5

2.2 3 950 112M 77.7 77.7 74.8 73.5 63.0 50.0 5.85 5.56 5.36 34 2.253 205 195 270 0.058 42.5

3 4 965 132S 79.7 79.7 77.3 72.5 63.5 50.0 7.89 7.49 7.22 45 3.025 195 185 270 0.097 57.5

3.7 5 960 132M 80.9 80.9 75.9 75.5 65.5 53.5 9.20 8.74 8.43 61 3.750 180 160 230 0.114 62.5

4 5.5 960 132M 81.4 81.9 80.4 77.5 69.5 56.5 9.63 9.15 8.82 59 4.054 190 175 275 0.131 69.0

5.5 7.5 965 132M 83.1 82.6 81.1 72.0 63.5 50.0 14.0 13.3 12.8 92 5.546 210 160 280 0.171 77.5

7.5 10 960 160M 84.7 83.7 81.3 81.5 76.5 66.0 16.5 15.7 15.1 94 7.602 210 185 255 0.363 110

11 15 965 160L 86.4 86.9 85.9 81.5 76.0 65.0 23.7 22.5 21.7 155 11.09 245 230 270 0.558 140

15 20 970 180L 87.7 88.2 87.7 82.0 79.5 73.5 31.7 30.1 29.0 178 15.05 195 140 210 1.342 195

18.5 25 975 200L 88.6 88.6 87.6 82.5 79.0 70.5 38.5 36.5 35.2 223 18.46 200 185 220 1.604 250

22 30 975 200L 89.2 89.7 89.7 82.0 78.5 69.5 45.7 43.4 41.8 296 21.95 210 180 220 1.912 270

30 40 975 225MC 90.2 90.2 87.2 86.0 83.5 76.0 58.8 55.8 53.8 344 29.94 175 155 210 2.442 325

37 50 975 250MC 90.8 90.8 89.8 85.5 81.0 73.0 72.4 68.8 66.3 451 36.92 185 180 220 3.373 405

45 60 980 280SB 91.4 91.5 90.7 82.5 79.5 71.0 90.7 86.1 83.0 597 44.68 150 140 230 4.400 500

55 75 980 280MB 91.9 92.0 91.3 83.5 80.5 72.0 109 103 99.7 680 54.61 150 140 235 5.290 557

75 100 985 315SB 92.6 92.7 92.1 84.5 81.5 72.5 146 138 133 840 74.20 160 130 230 10.40 800

90 125 985 315MB 93.0 93.0 92.5 84.5 81.5 72.0 174 165 159 1070 89.04 175 145 230 12.80 880

(110) (150) 988 315MB 93.5 93.5 93.0 84.5 81.5 72.5 212 201 194 1295 108.5 175 145 230 15.60 960

110 150 988 315LB 93.5 93.5 93.0 84.5 81.5 72.5 212 201 194 1295 108.5 175 145 230 15.60 990

132 175 988 315LB 93.7 93.7 93.2 84.0 80.0 71.0 255 242 233 1530 130.2 210 175 240 17.20 1120

(160) (215) 988 315LB 94.0 94.0 93.4 84.8 81.6 73.5 305 290 279 1950 157.8 210 175 240 23.20 1270

160 215 990 355MB 94.0 94.0 93.4 86.0 83.0 75.0 301 286 275 2054 157.5 180 160 300 28.00 1550

(200) (270) 988 315CB 94.2 94.2 93.8 85.5 83.0 74.0 377 358 345 2360 197.3 200 165 240 30.80 1650

200 270 990 355MB 94.0 94.0 93.6 86.0 83.0 75.0 376 357 344 2450 196.9 200 165 240 33.60 1750

(220) (300) 988 315CB 94.5 94.5 94.0 86.5 84.5 78.0 409 388 374 2550 217.0 180 160 240 35.20 1740

220 300 990 355MB 94.5 94.5 94.0 86.0 83.5 76.0 411 391 377 2700 216.6 200 165 240 37.60 1800(250) (335) 988 315DB 94.6 94.6 94.2 86.5 85.0 78.5 464 441 425 2950 246.6 200 165 240 41.20 1860

250 335 988 355LB 94.6 94.6 94.2 86.0 83.0 75.5 467 444 428 3050 246.6 200 165 250 41.20 1950

315 420 990 355CB 94.8 94.8 94.4 87.5 85.5 79.0 577 548 528 3830 310.1 210 175 240 56.00 2600

kW HP

3/4

LOAD

1/2

LOADFULL

LOAD

FULL

LOAD

OUTPUTCURRENT

FULL

LOAD FRAME

SIZE

3/4

LOAD

1/2

LOAD

FULL

LOADAPPROX.

WEIGHT

LOCKED

ROTOR PULL-UP

BREAK-

DOWN

ROTOR

GD2

7

7/26/2019 Aesv

9/32




7. Noise according to IEC 60034-9.8. 8 pole : Efficiency per TECO performance standard ( Comply to min. requirement of IE1 efficiency).9. Data subject to change without prior notice.

Performance


FULL LOAD (A) LRC

VOLTAGE (A)


0.18 0.25 710 80M 50.0 44.5 36.0 46.5 40.0 34.0 1.18 1.12 1.08 4.7 0.247 360 350 370 0.010 17.0

0.37 0.5 705 90S 59.5 56.7 50.5 61.5 52.0 41.5 1.54 1.46 1.41 5.0 0.511 180 170 240 0.017 24.0

0.55 0.75 700 90L 63.6 61.7 55.7 61.5 53.0 42.0 2.14 2.03 1.96 7.3 0.765 180 150 250 0.022 26.0

0.75 1 700 100L 66.7 65.2 59.8 66.0 56.5 45.5 2.59 2.46 2.37 9.4 1.043 180 160 210 0.033 29.0

1.1 1.5 690 100L 70.2 69.7 65.4 67.5 59.0 47.0 3.53 3.35 3.23 15 1.551 200 175 210 0.046 34.5

1.5 2 705 112M 72.8 72.3 68.5 67.0 59.0 46.5 4.67 4.44 4.28 20 2.070 160 135 215 0.065 41.0

2.2 3 700 132S 75.9 75.9 73.6 72.5 64.0 51.0 6.07 5.77 5.56 26 3.058 190 175 225 0.115 54.0

3 4 700 132M 78.1 78.6 76.4 73.0 65.0 52.0 7.99 7.59 7.32 34 4.170 190 175 220 0.138 60.0

3.7 5 720 160M 79.4 79.4 77.4 71.0 62.5 49.0 9.97 9.47 9.13 59 5.000 200 180 270 0.265 83.0

4 5.5 720 160M 80.0 80.3 78.2 71.5 64.0 51.5 10.6 10.1 9.73 59 5.406 200 180 270 0.265 83.0

5.5 7.5 720 160M 82.0 82.4 80.5 72.0 64.5 52.5 14.2 13.4 13.0 81 7.433 200 180 270 0.374 98.0

7.5 10 720 160L 83.8 84.3 82.7 73.5 66.5 54.5 18.5 17.6 16.9 107 10.14 200 190 270 0.530 115

11 15 725 180L 85.8 86.3 85.3 75.0 68.0 55.5 26.0 24.7 23.8 138 14.76 190 170 215 0.990 156

15 20 725 200L 87.2 87.8 86.8 76.5 70.5 59.0 34.2 32.5 31.3 164 20.13 190 170 205 1.418 224

18.5 25 730 225SC 88.1 88.1 87.1 78.0 72.0 62.0 40.9 38.9 37.5 236 24.66 185 150 200 2.093 288

22 30 730 225MC 88.8 88.3 86.8 77.0 70.5 59.0 48.9 46.4 44.8 281 29.32 200 175 210 2.442 316

30 40 730 250MC 89.9 89.4 87.9 78.5 70.5 60.0 64.6 61.4 59.1 378 39.99 190 160 210 3.475 389

37 50 735 280SB 90.6 91.0 90.4 77.5 78.5 75.0 80.1 76.1 73.3 495 48.98 130 125 210 5.553 553

45 60 735 280MB 91.2 91.6 91.1 78.0 79.2 76.0 96.1 91.3 88.0 595 59.57 135 125 210 6.760 624

55 75 735 315SB 92.5 92.5 91.8 79.5 75.0 64.0 114 108 104 630 72.92 165 135 220 15.20 840

75 100 735 315MB 92.7 92.7 92.0 80.5 76.0 66.0 153 145 140 820 99.44 160 130 220 19.60 960

90 125 735 315LB 93.0 93.0 92.3 81.0 77.0 67.5 182 172 166 1000 119.3 160 130 220 23.60 1060

110 150 735 315LB 93.5 93.5 92.9 81.0 78.0 68.5 221 210 202 1250 145.8 160 130 220 30.40 1160

(132) (175) 740 315CB 93.9 93.9 93.1 79.5 74.5 60.0 269 255 246 1550 173.8 110 95 230 28.00 1550

132 175 740 355MB 93.9 93.9 93.1 82.5 78.5 69.0 259 246 237 1950 173.8 120 100 240 34.00 1600

(160) (215) 740 315CB 94.3 94.3 93.8 80.5 75.5 65.0 320 304 293 1850 210.7 110 95 230 34.40 1650

160 215 740 355MB 94.3 94.3 93.8 82.5 78.5 69.0 312 297 286 1950 210.7 130 110 240 39.60 1750

(200) (270) 740 315DB 94.4 94.4 93.8 80.5 75.0 64.5 400 380 366 2300 263.4 110 95 230 41.20 1800

200 270 740 355LB 94.4 94.4 93.8 83.0 79.0 69.5 388 368 355 2550 263.4 130 110 240 52.00 2000(220) (300) 740 315DB 94.6 94.6 94.1 80.5 75.0 64.5 439 417 402 2550 289.7 110 95 230 45.60 1900

220 300 740 355LB 94.6 94.6 94.1 83.5 80.0 71.5 423 402 387 2700 289.7 125 105 240 56.40 2100

250 335 740 355CB 94.8 94.8 94.3 83.5 80.0 71.0 480 456 439 3200 329.2 135 110 240 67.60 2400

kW HP

3/4

LOAD

1/2

LOADFULL

LOAD

FULL

LOAD

OUTPUTCURRENT

FULL

LOAD FRAME

SIZE

3/4

LOAD

1/2

LOAD

FULL

LOADAPPROX.

WEIGHT

LOCKED

ROTOR PULL-UP

BREAK-

DOWN

ROTOR

GD2

8

7/26/2019 Aesv

10/32

Performance

IE 2

Performance Data

9

7/26/2019 Aesv

11/32

7/26/2019 Aesv

12/32

Performance






FULL LOAD (A) LRC

VOLTAGE (A)


0.55 0.75 1425 80M 78.1 78.0 75.1 72.5 62.0 47.5 1.48 1.40 1.35 8.0 0.376 290 260 305 0.010 17.5

0.75 1 1415 80M 79.6 79.5 76.9 73.5 63.5 49.5 1.95 1.85 1.78 11 0.516 300 295 325 0.013 20.5

1.1 1.5 1445 90S 81.4 81.4 78.9 76.0 67.0 53.0 2.70 2.57 2.47 19 0.741 270 205 325 0.017 25.0

1.5 2 1435 90L 82.8 83.7 82.6 81.0 73.0 59.5 3.40 3.23 3.11 23 1.017 250 180 300 0.022 27.5

2.2 3 1450 100L 84.3 85.0 84.1 81.5 74.0 61.0 4.87 4.62 4.45 33 1.476 210 170 300 0.041 37.0

3 4 1445 100L 85.5 85.9 84.8 82.0 75.0 62.5 6.50 6.18 5.95 44 2.020 210 170 300 0.050 40.0

3.7 5 1435 112M 86.3 87.0 87.0 86.5 83.0 74.0 7.53 7.15 6.90 59 2.509 220 150 290 0.076 50.0

4 5.5 1450 112M 86.6 87.6 87.5 85.0 80.5 71.0 8.26 7.84 7.56 58 2.684 220 200 300 0.083 53.0

5.5 7.5 1455 132S 87.7 88.7 88.6 85.5 80.5 70.0 11.1 10.6 10.2 81 3.678 255 210 305 0.123 70.5

7.5 10 1460 132M 88.7 89.6 89.5 84.0 78.5 67.0 15.3 14.5 14.0 112 4.998 275 200 305 0.142 82.0

11 15 1465 160M 89.8 90.6 90.7 86.5 83.0 74.5 21.5 20.4 19.7 160 7.306 220 180 300 0.296 115

15 20 1470 160L 90.6 91.3 91.2 86.5 82.5 73.5 29.1 27.6 26.6 220 9.929 220 185 300 0.427 140

18.5 25 1475 180M 91.2 91.7 91.6 85.5 83.0 76.5 36.0 34.2 33.0 230 12.20 200 185 300 0.654 180

22 30 1470 180L 91.6 92.4 92.2 85.5 83.5 77.5 42.7 40.5 39.1 270 14.56 195 155 250 0.770 200

30 40 1470 200L 92.3 92.9 92.9 87.5 84.5 77.0 56.4 53.6 51.7 420 19.86 230 180 300 1.217 255

37 50 1475 225SC 92.7 93.3 93.3 87.5 86.0 80.0 69.3 65.8 63.5 430 24.41 220 175 260 1.649 320

45 60 1480 225MC 93.1 93.3 92.9 86.0 82.5 75.0 85.4 81.1 78.2 580 29.58 210 170 300 1.979 355

55 75 1485 250MC 93.5 93.7 93.3 87.5 85.0 79.0 102 97.0 93.5 780 36.04 245 180 300 3.621 455

75 100 1480 280SB 94.0 94.0 93.2 87.0 84.0 77.5 139 132 128 1015 49.38 185 170 300 4.853 604

90 125 1480 280MB 94.2 94.0 93.2 85.5 82.5 75.5 170 161 155 1260 59.26 200 190 280 5.393 648

110 150 1484 315SB 94.5 94.5 93.8 88.5 86.0 79.0 200 190 183 1400 72.23 200 165 270 8.800 860

132 175 1484 315MB 94.7 94.7 94.0 88.5 86.0 79.0 239 227 219 1620 86.68 200 165 270 10.00 970

(160) (215) 1485 315MB 94.9 94.9 94.2 88.5 87.0 80.0 289 275 265 2000 105.0 210 175 270 11.60 1020

160 215 1485 315LB 94.9 94.9 94.2 88.5 87.0 80.0 289 275 265 2000 105.0 210 175 270 11.60 1050

200 270 1485 315LB 95.1 95.1 94.6 89.0 87.5 82.0 359 341 329 2450 131.2 200 165 270 14.40 1240

(220) (300) 1485 315CB 95.1 95.1 94.4 90.0 89.0 84.0 391 371 358 2800 144.4 210 175 260 22.00 1500

220 300 1485 355MB 95.1 95.1 94.4 87.0 83.5 74.5 404 384 370 2850 144.4 200 165 270 21.60 1650

(250) (335) 1485 315CB 95.1 95.1 94.4 90.0 89.0 84.5 444 422 406 3100 164.1 210 175 260 24.00 1620

250 335 1486 355MB 95.1 95.1 94.4 88.0 85.5 78.5 454 431 416 3100 163.9 200 165 270 24.40 1700(315) (420) 1485 315DB 95.1 95.1 94.6 89.5 87.5 81.5 562 534 515 4100 206.7 210 175 260 26.40 1820

315 420 1488 355LB 95.1 95.1 94.6 88.5 85.5 78.5 569 540 521 3900 206.3 200 165 270 28.80 2000

375 500 1488 355CB 95.3 95.3 94.8 89.5 87.5 81.5 668 635 612 4450 245.6 200 165 270 34.40 2400

FULL

LOAD

3/4

LOAD

1/2

LOAD

FULL

LOAD

ROTOR

GD2APPROX.

WEIGHT

kW HP

3/4

LOAD

1/2

LOADFULL

LOADLOCKED

ROTOR PULL-UP

BREAK-

DOWN

OUTPUTCURRENT

FULL

LOAD FRAME

SIZE

11

7/26/2019 Aesv

13/32

7/26/2019 Aesv

14/32

7/26/2019 Aesv

15/32

Performance



Note:1. The above are typical values based on test according to IEC 60045-2-1:2007. (DY)2. Tolerance according to IEC 60034-1.3. Breakdown & Locked rotor torques are show as average expected voltages4. Efficiency, power factor, speed and torque are the same for other voltages. Current values vary inversely with voltage5. Output in ( ) is for Optional Frame size upon request6. Frame size 315C, 315D & 355C: only suitable for IM B3 and IM B57. Noise according to IEC 60034-9.

8. Data subject to change without prior notice.


FULL LOAD (A) LRC

VOLTAGE (A)


0.75 1 2875 80M 80.7 78.3 75.1 84.5 78.0 66.5 1.67 1.59 1.53 12 0.254 280 275 335 0.006 18.0

1.1 1.5 2870 80M 82.7 83.0 81.3 85.0 78.5 66.5 2.38 2.26 2.18 18 0.373 300 295 350 0.007 19.5

1.5 2 2850 90S 84.2 85.4 85.8 90.5 87.0 78.0 2.99 2.84 2.74 22 0.512 220 210 300 0.012 25.5

2.2 3 2860 90L 85.9 86.7 86.8 89.5 85.0 75.5 4.35 4.13 3.98 35 0.748 245 235 315 0.014 29.0

3 4 2855 100L 87.1 88.3 88.4 90.0 86.5 78.5 5.81 5.52 5.32 48 1.022 325 310 355 0.025 41.5

3.7 5 2870 112M 87.8 88.2 88.0 90.5 87.5 80.0 7.07 6.72 6.48 60 1.254 290 270 345 0.046 51.5

4 5.5 2875 112M 88.1 89.0 88.9 91.0 87.5 80.0 7.58 7.20 6.94 69 1.354 270 250 360 0.046 51.5

5.5 7.5 2930 132S 89.2 89.8 89.5 88.5 86.0 79.5 10.6 10.1 9.69 80 1.826 210 205 340 0.075 73.0

7.5 10 2920 132S 90.1 90.9 90.8 87.0 84.5 77.5 14.5 13.8 13.3 100 2.499 210 195 315 0.081 76.0

11 15 2935 160M 91.2 92.0 92.0 90.0 89.0 83.5 20.4 19.3 18.6 150 3.647 230 185 300 0.183 130

15 20 2935 160M 91.9 92.0 92.0 89.0 85.5 77.5 27.9 26.5 25.5 230 4.973 275 230 330 0.205 130

18.5 25 2930 160L 92.4 93.0 93.0 90.0 89.5 84.0 33.8 32.1 30.9 260 6.144 245 200 300 0.237 140

22 30 2940 180M 92.7 92.7 92.5 87.0 85.0 77.0 41.4 39.4 38.0 300 7.281 225 180 300 0.283 180

30 40 2950 200L 93.3 93.5 92.5 90.0 90.0 86.5 54.3 51.6 49.7 400 9.895 200 145 300 0.602 265

37 50 2955 200L 93.7 94.5 94.0 91.0 90.5 87.0 65.9 62.6 60.4 510 12.18 210 145 300 0.753 300

45 60 2960 225MA 94.0 94.0 93.5 91.0 91.0 88.0 79.9 75.9 73.2 615 14.79 170 140 300 1.187 340

55 75 2970 250MA 94.3 94.5 94.0 91.5 90.0 86.5 96.8 92.0 88.7 735 18.02 165 130 315 1.544 465

75 100 2970 280SA 94.7 94.6 93.6 81.5 77.0 66.5 148 140 135 1090 24.61 155 135 300 1.935 553

90 125 2970 280MA 95.0 95.0 94.0 90.5 90.0 82.5 159 151 146 1255 29.53 150 135 285 2.463 620

110 150 2972 315SA 95.2 95.0 94.0 90.0 89.0 85.0 195 185 179 1400 36.07 200 165 240 4.000 900

132 175 2972 315MA 95.4 95.3 94.5 90.5 89.5 87.0 232 221 213 1650 43.28 200 165 240 4.800 960

(160) (215) 2975 315MA 95.6 95.5 94.8 91.0 90.0 86.5 279 265 256 2140 52.41 200 165 250 5.200 1000

160 215 2975 315LA 95.6 95.5 94.8 91.0 90.0 86.5 279 265 256 2140 52.41 200 165 250 5.200 1030

200 270 2975 315LA 95.8 95.8 95.2 91.5 90.5 87.5 347 329 317 2450 65.51 200 165 250 7.200 1160

(220) (300) 2975 315CA 95.8 95.6 95.0 90.0 88.5 83.5 388 368 355 2750 72.06 180 150 230 8.400 1520

220 300 2975 355MA 95.8 95.4 94.2 91.5 90.0 85.0 381 362 349 2810 72.06 140 120 280 12.40 1750

(250) (335) 2975 315CA 95.8 95.6 95.0 91.0 89.5 85.5 436 414 399 3000 81.89 180 150 235 10.00 1660

250 335 2975 355MA 95.8 95.5 94.5 92.0 91.0 87.0 431 409 395 3000 81.89 140 120 280 13.60 1820

(315) (420) 2975 315DA 95.8 95.6 95.0 91.0 90.0 86.0 549 522 503 3900 103.2 180 150 240 11.20 1800315 420 2978 355LA 95.8 95.5 94.5 92.0 91.0 87.0 543 516 497 3900 103.1 140 120 280 14.40 2150

375 500 2978 355CA 95.8 95.6 94.7 92.5 91.0 87.0 643 611 589 4500 122.7 150 125 280 16.00 2500

kW HP

3/4

LOAD

1/2

LOADFULL

LOAD

FULL

LOAD

OUTPUTCURRENT

FULL

LOAD FRAME

SIZE

3/4

LOAD

1/2

LOAD

FULL

LOADAPPROX.

WEIGHT

LOCKED

ROTOR PULL-UP

BREAK-

DOWN

ROTOR

GD2

14

7/26/2019 Aesv

16/32





Performance


FULL LOAD (A) LRC

VOLTAGE (A)


0.55 0.75 1430 80M 80.8 77.9 74.7 69.0 58.5 44.5 1.50 1.42 1.37 9.0 0.374 300 270 320 0.010 17.5

0.75 1 1410 80M 82.5 81.8 79.7 73.5 64.0 50.0 1.88 1.79 1.72 11 0.518 315 290 335 0.013 20.5

1.1 1.5 1430 90S 84.1 84.4 83.2 79.5 71.5 57.5 2.50 2.37 2.29 17 0.748 255 205 300 0.019 26.5

1.5 2 1435 90L 85.3 84.1 82.2 75.0 65.5 51.5 3.56 3.38 3.26 26 1.017 300 235 335 0.023 28.5

2.2 3 1450 100L 86.7 87.3 86.9 81.0 73.5 60.5 4.76 4.52 4.36 33 1.476 210 160 300 0.045 39.5

3 4 1455 100L 87.7 87.7 86.2 78.0 70.5 57.5 6.66 6.33 6.10 49 2.006 250 240 335 0.052 42.0

3.7 5 1445 112M 88.4 89.1 88.8 82.0 77.0 66.0 7.76 7.37 7.10 60 2.491 235 200 305 0.083 53.0

4 5.5 1445 112M 88.6 88.4 87.9 82.0 76.5 65.5 8.37 7.95 7.66 57 2.693 245 205 300 0.083 53.0

5.5 7.5 1455 132S 89.6 90.4 90.3 85.0 80.5 70.0 11.0 10.4 10.0 77 3.678 240 200 300 0.132 75.5

7.5 10 1460 132M 90.4 90.8 90.4 84.5 79.5 69.0 14.9 14.2 13.7 110 4.998 270 225 330 0.172 93.0

11 15 1460 160M 91.4 92.0 91.5 84.0 80.0 70.0 21.8 20.7 19.9 160 7.331 230 185 300 0.366 130

15 20 1460 160L 92.1 92.5 92.5 84.5 81.0 71.0 29.3 27.8 26.8 225 9.997 250 195 300 0.460 150

18.5 25 1475 180M 92.6 94.0 93.0 81.5 77.0 69.5 37.2 35.4 34.1 270 12.20 215 160 280 0.704 195

22 30 1475 180L 93.0 93.5 93.0 81.0 77.0 71.0 44.4 42.2 40.6 315 14.51 210 145 275 0.789 205

30 40 1470 200L 93.6 94.5 94.5 86.0 84.5 77.0 56.6 53.8 51.8 445 19.86 250 205 300 1.451 285

37 50 1480 225SC 93.9 94.5 94.0 85.5 82.0 73.0 70.0 66.5 64.1 505 24.33 210 175 300 1.896 350

45 60 1480 225MC 94.2 94.5 94.0 84.5 79.5 70.0 85.9 81.6 78.6 600 29.58 210 175 300 1.979 360

55 75 1485 250MC 94.6 94.6 94.0 87.5 84.5 77.0 101 95.9 92.4 750 36.04 210 185 295 3.911 480

75 100 1480 280SB 95.0 95.0 94.5 85.0 82.0 73.0 141 134 129 1030 49.38 160 150 300 5.033 621

90 125 1480 280MB 95.2 95.2 94.7 84.0 80.0 70.5 171 162 157 1260 59.26 175 165 300 6.112 706

110 150 1484 315SB 95.4 95.4 95.0 89.0 87.0 80.5 197 187 180 1400 72.23 200 165 270 9.200 920

132 175 1484 315MB 95.6 95.6 95.2 89.0 87.5 82.0 236 224 216 1650 86.68 200 165 270 10.40 1000

(160) (215) 1485 315MB 95.8 95.8 95.5 89.5 88.0 82.0 284 269 260 2000 105.0 200 165 260 11.60 1040

160 215 1485 315LB 95.8 95.8 95.5 89.5 88.0 82.0 284 269 260 2000 105.0 200 165 260 11.60 1070

200 270 1485 315LB 96.0 96.0 95.8 90.0 89.0 84.5 352 334 322 2500 131.2 200 165 260 14.00 1260

(220) (300) 1488 315CB 96.0 95.9 95.2 86.0 82.0 72.0 405 385 371 2800 144.1 200 165 260 24.00 1550

220 300 1487 355MB 96.0 96.0 95.4 88.8 86.2 79.0 392 372 359 2750 144.2 180 150 260 22.80 1750

(250) (335) 1488 315CB 96.0 96.0 95.4 86.5 83.5 75.0 457 435 419 3100 163.7 200 165 260 26.00 1700

250 335 1487 355MB 96.0 95.8 95.2 88.8 86.2 78.2 446 423 408 3280 163.8 200 165 270 27.20 1820(315) (420) 1488 315DB 96.0 96.0 95.5 86.5 83.5 75.0 576 548 528 3900 206.3 200 165 260 29.20 1940

315 420 1488 355LB 96.0 96.0 95.5 89.5 87.5 81.0 557 529 510 3900 206.3 200 165 270 31.20 2150

375 500 1488 355CB 96.0 96.0 95.5 89.5 87.0 81.0 663 630 607 4570 245.6 200 165 270 35.60 2500

FULL

LOAD

3/4

LOAD

1/2

LOAD

FULL

LOAD

ROTOR

GD2APPROX.

WEIGHT

kW HP

3/4

LOAD

1/2

LOADFULL

LOADLOCKED

ROTOR PULL-UP

BREAK-

DOWN

OUTPUTCURRENT

FULL

LOAD FRAME

SIZE

15

7/26/2019 Aesv

17/32





Performance


FULL LOAD (A) LRC

VOLTAGE (A)


0.55 0.75 905 80M 77.2 69.7 66.2 69.0 58.0 44.5 1.57 1.49 1.44 6.0 0.591 210 195 250 0.012 19.5

0.75 1 935 90S 78.9 80.6 79.4 71.0 62.5 49.0 2.03 1.93 1.86 9.0 0.780 210 190 250 0.022 28.0

1.1 1.5 930 90L 81.0 81.2 80.5 72.0 63.5 50.0 2.87 2.72 2.62 13 1.151 210 185 240 0.026 30.5

1.5 2 950 100L 82.5 82.9 81.5 72.5 65.0 52.0 3.81 3.62 3.49 18 1.536 210 175 250 0.058 43.5

2.2 3 960 112M 84.3 84.3 82.2 67.0 59.0 47.0 5.92 5.62 5.42 29 2.230 190 180 280 0.083 53.5

3 4 970 132S 85.6 86.1 85.1 76.0 69.0 58.5 7.01 6.66 6.42 41 3.009 195 170 300 0.137 75.0

3.7 5 965 132M 86.5 87.5 87.0 77.0 70.0 58.0 8.44 8.02 7.73 56 3.731 200 185 275 0.143 77.0

4 5.5 970 132M 86.8 87.0 85.6 77.0 70.0 57.5 9.09 8.64 8.33 58 4.012 200 185 310 0.182 84.0

5.5 7.5 970 132M 88.0 88.5 87.6 79.5 72.5 60.0 11.9 11.3 10.9 88 5.517 210 205 300 0.216 91.0

7.5 10 970 160M 89.1 90.0 89.0 79.0 73.0 61.0 16.2 15.4 14.8 110 7.523 235 210 300 0.483 135

11 15 970 160L 90.3 91.0 90.5 78.0 72.0 60.5 23.7 22.5 21.7 170 11.03 295 255 300 0.628 150

15 20 970 180L 91.2 92.0 92.0 82.0 78.0 68.0 30.5 29.0 27.9 200 15.05 215 165 255 1.337 205

18.5 25 975 200L 91.7 92.5 92.5 80.5 76.0 66.5 38.1 36.2 34.9 260 18.46 220 185 265 1.829 270

22 30 975 200L 92.2 93.0 93.5 81.5 77.0 68.0 44.5 42.3 40.7 305 21.95 210 185 265 2.078 290

30 40 980 225MC 92.9 93.5 93.5 83.5 80.0 76.5 58.8 55.8 53.8 335 29.79 210 160 240 3.023 385

37 50 980 250MC 93.3 94.0 94.0 85.0 81.5 75.0 70.9 67.3 64.9 490 36.74 230 200 280 4.194 460

45 60 985 280SB 93.7 93.7 93.0 81.5 77.5 67.5 89.5 85.1 82.0 587 44.52 185 175 285 5.530 561

55 75 985 280MB 94.1 94.1 93.5 83.0 80.0 71.0 107 102 98.0 700 54.41 185 175 300 6.733 635

75 100 987 315SB 94.6 94.6 94.1 85.5 82.5 74.5 141 134 129 930 74.05 200 165 240 12.80 900

90 125 987 315MB 94.9 94.9 94.5 85.5 83.0 75.5 169 160 154 1200 88.86 200 165 240 15.20 960

(110) (150) 988 315MB 95.1 95.1 94.7 85.5 83.0 75.5 206 195 188 1400 108.5 200 165 240 18.40 1060

110 150 988 315LB 95.1 95.1 94.7 85.5 83.0 75.5 206 195 188 1400 108.5 200 165 240 18.40 1090

132 175 988 315LB 95.4 95.4 95.0 85.5 83.0 75.5 246 234 225 1650 130.2 200 165 240 20.40 1250

(160) (215) 988 315LB 95.6 95.6 95.2 85.0 82.0 74.0 299 284 274 2000 157.8 200 165 250 23.20 1320

160 215 988 355MB 95.6 95.6 95.2 85.5 82.0 73.0 297 283 272 2000 157.8 170 145 250 33.20 1750

(200) (270) 988 315CB 95.8 95.8 95.2 86.0 83.0 74.5 369 350 338 2500 197.3 170 145 250 33.20 1800

200 270 988 355MB 95.8 95.8 95.4 86.0 82.5 74.0 369 350 338 2400 197.3 170 145 250 40.40 1950

(220) (300) 988 315CB 95.8 95.8 95.4 86.5 84.0 76.0 403 383 369 2800 217.0 170 145 250 37.60 1900

220 300 988 355MB 95.8 95.8 95.5 86.5 83.5 76.0 403 383 369 2700 217.0 170 145 250 44.00 2020(250) (335) 988 315DB 95.8 95.8 95.4 86.5 83.5 75.0 458 435 420 3250 246.6 170 145 250 42.00 1940

250 335 988 355LB 95.8 95.8 95.5 86.8 84.0 76.5 457 434 418 3060 246.6 170 145 250 49.60 2200

315 420 988 355CB 95.8 95.8 95.5 87.0 85.0 78.0 574 546 526 3700 310.7 170 145 250 60.40 2800

FULL

LOAD

3/4

LOAD

1/2

LOAD

FULL

LOAD

ROTOR

GD2APPROX.

WEIGHT

kW HP

3/4

LOAD

1/2

LOADFULL

LOAD

LOCKED

ROTOR PULL-UP

BREAK-

DOWN

OUTPUTCURRENT

FULL

LOAD FRAME

SIZE

16

7/26/2019 Aesv

18/32

Dimensions

B3 Outline DimensionFoot Mounted(B3)Motor Type: AESV1S, AESV2S, AESV3SFrame Size: 80M to 225M

Output (kW)

2P 4P 6P 8P

0.75

1.1

0.55

0.75 0.55 0.18 80M 1 125 34.5 161 177 148 109 54.5 100 --- --- --- 137 18.5 35 50

1.5 1.1 0.75 0.37 90S 140 40 180 197 158 109 54.5 100 --- --- --- 161 36 35 56

2.2 1.5 1.1 0.55 90L 140 40 180 197 158 109 54.5 125 100 --- --- 186 36 35 56

3 2.2

3 1.5

0.75

1.1 100L 160 40 200 219 185.5 125 62.5 140 --- --- --- 181 21 40 63

3.7

4

3.7

4 2.2 1.5 112M 190 45 235 235 193 125 62.5 140 --- --- --- 186 28 40 70

5.5

7.5 5.5 3 2.2 132S 216 57 263 273 210.5 125 62.5 140 --- --- --- 184 6 40 89

--- 7.5

3.7

4

5.5

3 132M 216 57 263 273 210.5 125 62.5 178 140 --- --- 222 6 40 89

11

15 11 7.5

3.7

4

5.5

160M 254 60 300 317 240.5 166 83 210 --- 57.5 57.5 256 47 60 108

18.5 15 11 7.5 160L 254 60 300 317 240.5 166 83 254 210 57.5 101.5 300 47 60 108

22 18.5 --- --- 180M 279 65 330 354 266.5 166 83 241 --- 62 62 292 39 60 121

--- 22 15 11 180L 279 65 330 354 266.5 166 83 279 241 62 100 330 39 60 121

30

37 30

18.5

22 15 200L 318 70 378 398 332 231 110.5 305 --- 76 76 365 60 106 133

--- 37 --- 18.5 225SC 356 75 431 449 358 231 110.5 286 --- 90 90 350 37.5 106 149

45 --- --- --- 225MA 356 75 431 449 358 231 110.5 311 286 90 115 375 37.5 106 149

--- 45 30 22 225MC 356 75 431 449 358 231 110.5 311 286 90 115 375 37.5 106 149

3

4

2

AD BA' BB BC BE CFRAME

SIZE

FIG.

NO A AA AB BAAC AG AS B B'

B3

Note:1. All dimensions are in mm.2. Pre-packed shielded ball bearing for frame size 80M to 225M3. Dual Eye-bolts provided for frame 90S to 355C

4. Data are subject to change without prior notice

17

7/26/2019 Aesv

19/32

Dimensions

B3 Outline DimensionFoot Mounted(B3)

Motor Type: AESV1S, AESV2S, AESV3SFrame Size: 80M to 225M

B3

Note:1. All dimensions are in mm.2. Tolerance of shaft end diameter D: 1) 19~28:j6, 2) 38~48:k6, 3) 55~65:m63. Tolerance of shaft center high H : +0, -0.5


D E EB EF EG F G GA DB DRIVE ENDOPPOSITE

DRIVE END

80M 80 10 115 10 293 109 40 M20x1.5 19 40 32 4 16 6 15.5 21.5 M6 6204ZZC3 6204ZZC3

90S 90 10 125 10 344.5 109 40 M20x1.5 24 50 40 5 19 8 20 27 M8

90L 90 10 125 10 369.5 109 40 M20x1.5 24 50 40 5 19 8 20 27 M8

100L 100 12 146 12 392 125 50 M25X1.5 28 60 50 5 22 8 24 31 M10 6206ZZC3 6206ZZC3

112M 112 1 3 153.5 12 412.5 125 50 M25X1.5 28 60 50 5 22 8 24 31 M10 6306ZZC3 6306ZZC3

132S 132 16 171 12 466 125 50 M25x1.5 38 80 70 5 28 10 33 41 M12

132M 132 16 171 12 504 125 50 M25x1.5 38 80 70 5 28 10 33 41 M12

160M 160 18 198 14.5 608 158 60 M32x1.5 42 110 100 5 36 12 37 45 M16

160L 160 18 198 14.5 652 158 60 M32x1.5 42 110 100 5 36 12 37 45 M16

180M 180 20 224 14.5 672 158 70 M32x1.5 48 110 100 5 36 14 42.5 51.5 M16

180L 180 20 224 14.5 710 158 70 M32x1.5 48 110 100 5 36 14 42.5 51.5 M16

200L 200 24 262 18.5 770 231 80 M50x1.5 55 110 100 5 42 16 49 59 M20 6312ZZC3 6212ZZC3

225SC 225 28 288 18.5 816 231 90 M50x1.5 60 140 125 7.5 42 18 53 64 M20 6313ZZC3 6313ZZC3

225MA 225 28 288 18.5 811 231 90 M50x1.5 55 110 100 5 42 16 49 59 M20 6312ZZC3 6312ZZC3

225MC 225 28 288 18.5 841 231 90 M50x1.5 60 140 125 7.5 42 18 53 64 M20 6313ZZC3 6313ZZC3

6309ZZC3 6307ZZC3

6311ZZC3 6310ZZC3

6205ZZC3 6205ZZC3

6308ZZC3 6306ZZC3

O UB

SHAFT EXTENSION BEARING

LLFRAME

SIZEH HA K LHE

18

621

621

621

621

7/26/2019 Aesv

20/32

Dimensions

B3 Outline DimensionFoot Mounted(B3)Motor Type: AESV1S, AESV2S, AESV3SFrame Size: 250 M to 355C

B3

Note:1. All dimensions are in mm.2. Open type ball bearing for frame size 250M to 355C3. Dual Eye-bolts provided for frame 90S to 355C

4. Output in ( ) is for optional frame size upon request5. Data are subject to change without prior notice

Output (kW)2P 4P 6P 8P

55 --- --- --- 250MA 406 85 480 499 400 255 1 22.5 349 --- 105 105 425 57.5 119 168

--- 55 37 30 250MC 406 85 480 499 400 255 1 22.5 349 --- 105 105 425 57.5 119 168

75 --- --- --- 280SA 457 110 560 546 433 255 122.5 368 --- 110 110 445 48 119 190

--- 75 45 37 280SB 457 110 560 546 433 255 122.5 368 --- 110 110 445 48 119 190

90 --- --- --- 280MA 457 110 560 546 433 255 122.5 419 --- 130 137 495 48 119 190

--- 90 55 45 280MB 457 110 560 546 433 255 122.5 419 --- 130 137 495 48 119 190

110 --- --- --- 315SA 508 115 615 620 527.5 336 163 406 --- 210 210 620 53 140 216

--- 110 75 55 315SB 508 115 615 620 527.5 336 163 406 --- 210 210 620 53 140 216

132(160)

--- --- --- 315MA 508 115 615 620 527.5 336 163 457 --- 240 240 670 53 140 216

--- 132

(160)90

(110) 75 315MB 508 115 615 620 527.5 336 163 457 --- 240 240 670 53 140 216

160

200 --- --- --- 315LA 508 130 630 620 527.5 336 163 508 --- 230 230 770 53 140 216

--- 160

200

110132

(160)

90

110 315LB 508 130 630 620 527.5 336 163 508 --- 230 230 770 53 140 216

(220)

(250) --- --- --- 315CA 508 150 650 682 590 412 189 710 --- 335 335 900 68 180 216

--- (220)

(250)(200)(220)

(132)(160)

315CB 508 150 650 682 590 412 189 710 --- 335 335 900 68 180 216

(315) --- --- --- 315DA 508 150 650 682 590 412 189 900 --- 180 250 1060 68 180 216

--- (315) (250) (200)

(220) 315DB 508 150 650 682 590 412 189 900 --- 180 250 1060 68 180 216

220

250 --- --- --- 355MA 610 150 750 810 645 412 189 --- 560 330 330 910 48 180 254

--- 220

250

160

200220

132

160 355MB 610 150 750 810 645 412 189 --- 560 330 330 910 48 180 254

315 --- --- --- 355LA 610 150 750 810 645 412 189 630 --- 330 330 910 48 180 254

--- 315 250 200

220 355LB 610 150 750 810 645 412 189 630 --- 330 330 910 48 180 254

375 --- --- --- 355CA 610 150 750 810 645 412 189 710 --- 390 390 1100 48 180 254

--- 375 315 250 355CB 610 150 750 810 645 412 189 710 --- 390 390 1100 48 180 254

BA' BB

6

5

AC BC BE CAD AG AS B B' BAABFRAME

SIZEFIG.NO

A AA

19

7/26/2019 Aesv

21/32

Dimensions

B3 Outline DimensionFoot Mounted(B3)

Motor Type: AESV1S, AESV2S, AESV3SFrame Size: 250M to 355C

B3

Note:1. All dimensions are in mm.2. Tolerance of shaft end diameter D: 1) 55~100:m63. Tolerance of shaft center high H : 1) 80~250: +0, -0.5, 2) 280~355: +0, -1



DRIVE END

250MA 250 30 322 24 921 255 105 M63x1.5 60 140 125 7.5 42 18 53 64 M20 6313C3 6313C3

250MC 250 30 322 24 921 255 105 M63x1.5 65 140 125 7.5 42 18 58 69 M20 6315C3 6313C3

280SA 280 35 354.5 24 1037.5 255 1 40 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6314C3 6314C3

280SB 280 35 354.5 24 1037.5 255 1 40 M63X1.5 7 5 140 125 7.5 40 20 67.5 79.5 M20 6318C3 6316C3

280MA 280 35 354.5 24 1087.5 255 1 40 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6314C3 6314C3

280MB 280 35 354.5 24 1087.5 255 1 40 M63X1.5 7 5 140 125 7.5 40 20 67.5 79.5 M20 6318C3 6316C3

315SA 315 35 430 28 1216 322 180 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3

315SB 315 35 430 28 1246 322 180 M63X1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

315MA 315 35 430 28 1266 322 180 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3

315MB 315 35 430 28 1296 322 180 M63X1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

315LA 315 45 430 28 1366 322 180 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3

315LB 315 45 430 28 1396 322 180 M63X1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

315CA 315 45 485 28 1484 372 200 M72X2 75 140 125 7.5 40 20 6 7.5 79.5 M20 6316C3 6316C3

315CB 315 45 485 28 1514 372 200 M72X2 9 5 170 160 5 48 25 86 100 M24 6322C3 6322C3

315DA 315 45 485 28 1674 372 200 M72X2 75 140 125 7.5 40 20 6 7.5 79.5 M20 6316C3 6316C3

315DB 315 45 485 28 1704 372 200 M72X2 9 5 170 160 5 48 25 86 100 M24 6322C3 6322C3

355MA 355 45 540 28 1605 372 230 M72X2 8 0 1 70 140 5 40 22 71 85 M20 6318C3 6318C3

355MB 355 45 540 28 1645 372 230 M72X2 100 210 180 5 48 28 90 106 M24 6322C3 6322C3

355LA 355 45 540 28 1605 372 230 M72X2 8 0 1 70 140 5 40 22 71 85 M20 6318C3 6318C3

355LB 355 45 540 28 1645 372 230 M72X2 100 210 180 5 48 28 90 106 M24 6322C3 6322C3

355CA 355 45 540 28 1795 372 230 M72X2 8 0 1 70 140 5 40 22 71 85 M20 6318C3 6318C3

355CB 355 45 540 28 1835 372 230 M72X2 100 210 180 5 48 28 90 106 M24 6322C3 6322C3

FRAME

SIZEH HA HE UB

SHAFT EXTENSION BEARINGK L OLL

20

7/26/2019 Aesv

22/32

7/26/2019 Aesv

23/32


DRIVE END

80M 68.5 293 109 40 M20X1.5 19 40 32 4 16 6 15.5 21.5 M6 6204ZZC3 6204ZZC3

90S 92 344.5 109 40 M20X1.5 24 50 40 5 19 8 20 27 M8

90L 92 369.5 109 40 M20X1.5 24 50 40 5 19 8 20 27 M8

100L 84 392 125 50 M25X1.5 28 60 50 5 22 8 24 31 M10 6206ZZC3 6206ZZC3

112M 98 412.5 125 50 M25X1.5 28 60 50 5 22 8 24 31 M10 6306ZZC3 6306ZZC3

132S 95 466 125 50 M25X1.5 38 80 70 5 28 10 33 41 M12

132M 95 504 125 50 M25X1.5 38 80 70 5 28 10 33 41 M12

160M 155 608 158 60 M32x 1.5 42 110 100 5 36 12 37 45 M16

160L 155 652 158 60 M32x 1.5 42 110 100 5 36 12 37 45 M16

180M 160 672 158 70 M32x 1.5 48 110 100 5 36 14 42.5 51.5 M16

180L 160 710 158 70 M32x 1.5 48 110 100 5 36 14 42.5 51.5 M16

200L 193 770 231 80 M50x 1.5 55 110 100 5 42 16 49 59 M20 6312ZZC3 6212ZZC3

225SC 186.5 816 231 90 M50 x 1.5 60 140 125 7.5 42 18 53 64 M20 6313ZZC3 6313ZZC3

225MA 186.5 811 231 90 M50 x 1.5 55 110 100 5 42 16 49 59 M20 6312ZZC3 6312ZZC3

225MC 186.5 841 231 90 M50 x 1.5 60 140 125 7.5 42 18 53 64 M20 6313ZZC3 6313ZZC3

6205ZZC3

L

SHAFT EXTENSION

6309ZZC3 6307ZZC3

6311ZZC3 6310ZZC3

BEARING

6205ZZC3

LL O UB

6308ZZC3 6306ZZC3

FRAME

SIZEHH

Dimensions

V1 Outline DimensionFlange Mounted(V1)

Motor Type: AESU1S, AESU2S, AESU3SFrame Size: 80M to 225M

V1

Note:1. All dimensions are in mm.2. Tolerance of shaft end diameter D: 1) 19~28:j6, 2) 38~48:k6, 3) 55~65:m63. Data are subject to change without prior notice

22

62

62

62

62

7/26/2019 Aesv

24/32

Dimensions

V1 Outline DimensionFlange Mounted(V1)Motor Type: AESU1S, AESU2S, AESU3SFrame Size: 250M to 355L

V1

Note:1. All dimensions are in mm.2. Tolerance of N: 130~450: j6 , 550~680: js63. Open type ball bearing for frame size 250M to 355L

4. Output in ( ) is for optional frame size upon request5. Dual Eye-bolts provided for frame 90S to 355D6. Data are subject to change without prior notice

Output (kW)

2P 4P 6P 8P LA LE M N P S T

55 --- --- --- 250MA 22 140 500 450 550 18.5 5 642 400 255 122.5 119 322

--- 55 37 30 250MC 22 140 500 450 550 18.5 5 642 400 255 122.5 119 322

75 --- --- --- 280SA 22 140 500 450 550 18.5 5 713 433 255 122.5 119 354.5

--- 75 45 37 280SB 22 140 500 450 550 18.5 5 713 433 255 122.5 119 354.5

90 --- --- --- 280MA 22 140 500 450 550 18.5 5 713 433 255 122.5 119 354.5

--- 90 55 45 280MB 22 140 500 450 550 18.5 5 713 433 255 122.5 119 354.5

110 --- --- --- 315SA 25 140 600 550 660 24 6 660 527 336 163 140 430

--- 110 75 55 315SB 25 170 600 550 660 24 6 660 527 336 163 140 430

132

(160) --- --- --- 315MA 25 140 600 550 660 24 6 660 527 336 163 140 430

--- 132

(160)

90

(110) 75 315MB 25 170 600 550 660 24 6 660 527 336 163 140 430

160

200 --- --- --- 315LA 25 140 600 550 660 24 6 660 527 336 163 140 430

--- 160

200

110132

(160)

90

110

315LB 25 170 600 550 660 24 6 660 527 336 163 140 430

220

250 --- --- --- 355MA 30 170 740 680 800 24 6 980 645 412 189 180 540

--- 220

250

160200220

132160

355MB 30 210 740 680 800 24 6 980 645 412 189 180 540

315 --- --- --- 355LA 30 170 740 680 800 24 6 980 645 412 189 180 540

--- 3 15 250 200

220 355LB 30 210 740 680 800 24 6 980 645 412 189 180 540

6

7

8

5

AS BE HEAGADFRAME

SIZEFIG.NO

FLANGE DIMENSIONAC

23

7/26/2019 Aesv

25/32

Dimensions

V1 Outline DimensionFlange Mounted(B3)

Motor Type: AESU1S, AESU2S, AESU3SFrame Size: 250M to 355L

V1

Note:1. All dimensions are in mm.2. Tolerance of shaft end diameter D: 1) 55~100:m63. Data are subject to change without prior notice


DRIVE END

250MA 225.5 921 255 105 M63 x 1.5 60 140 125 7.5 42 18 53 64 M20 6313C3 6313C3

250MC 225.5 921 255 105 M63 x 1.5 65 140 125 7.5 42 18 58 69 M20 6315C3 6313C3

280SA 238 1037.5 255 140 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6314C3 6314C3

280SB 238 1037.5 255 140 M63X1.5 75 140 125 7 .5 40 20 67.5 79.5 M20 6318C3 6316C3

280MA 238 1087.5 255 140 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6314C3 6314C3

280MB 238 1087.5 255 140 M63X1.5 75 140 125 7 .5 40 20 67.5 79.5 M20 6318C3 6316C3

315SA 269 1216 322 180 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 7314C3

315SB 269 1246 322 180 M63X1.5 80 170 160 5 40 22 71 85 M20 6320C3 7316C3

315MA 269 1266 322 180 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 7314C3

315MB 269 1296 322 180 M63X1.5 80 170 160 5 40 22 71 85 M20 6320C3 7316C3

315LA 269 1366 322 180 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 7314C3

315LB 269 1396 322 180 M63X1.5 80 170 160 5 40 22 71 85 M20 6320C3 7316C3

355MA 302 1605 372 230 M72X2 80 170 140 5 40 22 71 85 M20 6318C3 7318C3

355MB 302 1645 372 230 M72X2 100 210 180 5 48 28 90 106 M24 6322C3 7322C3

355LA 302 1605 372 230 M72X2 80 170 140 5 40 22 71 85 M20 6318C3 7318C3

355LB 302 1645 372 230 M72X2 100 210 180 5 48 28 90 106 M24 6322C3 7322C3

OLLFRAME

SIZEUB

SHAFT EXTENSION BEARING

HH L

24

7/26/2019 Aesv

26/32

Dimensions

B35 Outline DimensionFoot & Flange Mounted(B35)Motor Type: AESV1S-LA, AESV2S-LA, AESV3S-LAFrame Size: 80M to 225M

B35

Note:1. All dimensions are in mm.2. Tolerance of N: 130~450: j63. Pre-packed shielded ball bearing for frame size 80M to 225M

4. Dual Eye-bolts provided for frame 90S to 355C5. Data are subject to change without prior notice

Output (kW)

2P 4P 6P 8P LA LE M N P S T

0.75

1.1

0.55

0.75 0.55 0.18 80M 1 12 40 165 130 200 12 3.5 125 34.5 161 177 148 109 54.5 100 --- --- --- 137

1.5 1.1 0.75 0.37 90S 12 50 165 130 200 12 3.5 140 40 180 197 158 109 54.5 100 --- --- --- 161

2.2 1.5 1.1 0.55 90L 12 50 165 130 200 12 3.5 140 40 180 197 158 109 54.5 125 100 --- --- 186

3 2.2

3 1.5

0.75

1.1 100L 16 60 215 180 250 14.5 4 160 40 200 219 185.5 125 62.5 140 --- --- --- 181

3.7

4

3.7

4 2.2 1.5 112M 15 60 215 180 250 14.5 4 190 45 235 235 193 125 62.5 140 --- --- --- 186

5.5

7.5 5.5 3 2.2 132S 16 80 265 230 300 14.5 4 216 57 263 273 210.5 125 62.5 140 --- --- --- 184

--- 7.5

3.7

4

5.5

3 132M 16 80 265 230 300 14.5 4 216 57 263 273 210.5 125 62.5 178 140 --- --- 222

11

15 11 7.5

3.7

4

5.5

160M 15 110 300 250 350 18.5 5 254 60 300 317 240.5 166 83 210 --- 57.5 57.5 256

18.5 15 11 7.5 160L 15 110 300 250 350 18.5 5 254 60 300 317 240.5 166 83 254 210 57.5 101.5 300

22 18.5 --- --- 180M 15 110 300 250 350 18.5 5 279 65 330 354 266.5 166 83 241 --- 62 62 292

--- 22 15 11 180L 15 110 300 250 350 18.5 5 279 65 330 354 266.5 166 83 279 241 62 100 330

30

37 30

18.5

22 15 200L 17 110 350 300 400 18.5 5 318 70 378 398 332 231 110.5 305 --- 76 76 365

--- 37 --- 18.5 225SC 20 140 400 350 450 18.5 5 356 75 431 449 358 231 110.5 286 --- 90 90 350

45 --- --- --- 225MA 20 110 400 350 450 18.5 5 356 75 431 449 358 231 110.5 311 286 90 115 375

--- 45 30 22 225MC 20 140 400 350 450 18.5 5 356 75 431 449 358 231 110.5 311 286 90 115 375

4

AB

3

BA BA' BBAG AS B B'

2

AC ADFRAME

SIZE

FIG.

NO

FLANGE DIMENSIONA AA

25

7/26/2019 Aesv

27/32

Dimensions

B35 B35 Outline DimensionFoot & Flange Mounted(B35)Motor Type: AESV1S-LA, AESV2S-LA, AESV3S-LA

Frame Size: 80M to 225M

Note:1. All dimensions are in mm.2. Tolerance of shaft end diameter D: 1) 19~28:j6, 2) 38~48:k6, 3) 55~65:m63. Tolerance of shaft center high H : +0, -0.5



DRIVE END

80M 18.5 35 50 80 10 115 10 293 109 40 M20x1.5 19 40 32 4 16 6 15.5 21.5 M6 6204ZZC3 6204ZZC3

90S 36 35 56 90 10 125 10 344.5 109 40 M20x1.5 24 50 40 5 19 8 20 27 M8

90L 36 35 56 90 10 125 10 369.5 109 40 M20x1.5 24 50 40 5 19 8 20 27 M8

100L 21 40 63 100 12 146 12 392 125 50 M25x1.5 28 60 50 5 22 8 24 31 M10 6206ZZC3 6206ZZC3

112M 28 40 70 112 13 153.5 12 412.5 1 25 50 M25x1.5 28 60 50 5 22 8 24 31 M10 6306ZZC3 6306ZZC3

132S 6 40 89 132 16 171 12 466 125 50 M25x1.5 38 80 70 5 28 10 33 41 M12

132M 6 40 89 132 16 171 12 504 125 50 M25x1.5 38 80 70 5 28 10 33 41 M12

160M 38 60 108 160 18 198 14.5 608 158 60 M32x1.5 42 110 100 5 36 12 37 45 M16

160L 38 60 1 08 160 18 198 14.5 652 158 60 M32x1.5 42 110 100 5 36 12 37 45 M16

180M 39 60 121 180 20 224 14.5 672 158 70 M32x1.5 4 8 110 100 5 36 1 4 42.5 51.5 M16

180L 39 60 1 21 180 20 224 14.5 710 158 70 M32x1.5 4 8 110 100 5 36 1 4 42.5 51.5 M16

200L 60 106 133 200 24 262 18.5 770 231 80 M50x1.5 55 110 100 5 42 16 49 59 M20 6312ZZC3 6312ZZC3

225SC 37. 5 1 06 149 225 2 8 288 18.5 816 231 90 M50x1.5 6 0 140 125 7.5 42 18 53 64 M20 6313ZZC3 6313ZZC3

225MA 37. 5 1 06 149 225 28 288 18.5 811 231 90 M50x1.5 55 110 100 5 42 16 49 59 M20 6312ZZC3 6312ZZC3

225MC 37. 5 1 06 149 225 28 288 18.5 841 231 90 M50x1.5 6 0 140 125 7.5 42 18 53 64 M20 6313ZZC3 6313ZZC3

6309ZZC3 6307ZZC3

6311ZZC3 6310ZZC3

LL O UBLK

BEARING

6205ZZC3 6205ZZC3

6308ZZC3 6306ZZC3

C H HA HEFRAME

SIZE

SHAFT EXTENSION

BC BE

26

.

.

.

.

.

.

.

.

.

.

.

. 621

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. 621

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. 621

.

.

.

. 62

.

.

.

.

.

.

.

.

7/26/2019 Aesv

28/32

7/26/2019 Aesv

29/32

Dimensions

B35 B35 Outline DimensionFoot & Flange Mounted(B35)Motor Type: AESV1S-LA, AESV2S-LA, AESV3S-LA

Frame Size 250M to 355C

Note:1. All dimensions are in mm.2. Tolerance of shaft end diameter D: 1) 55~100:m63. Tolerance of shaft center high H : 1) 80~250: +0, -0.5, 2) 280~355: +0, -1



DRIVE END

250MA 57.5 119 168 250 3 0 322 24 921 255 105 M63x1.5 6 0 140 125 7.5 42 18 53 64 M20 6313C3 6313C3

250MC 57.5 119 168 250 3 0 322 24 921 255 105 M63x1.5 6 5 140 125 7.5 42 18 58 69 M20 6315C3 6313C3

280SA 48 119 190 280 35 354.5 24 1037. 5 255 140 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6314C3 6314C3

280SB 48 119 190 280 35 354.5 24 1037. 5 255 140 M63X1.5 75 140 1 25 7.5 40 20 67.5 79.5 M20 6318C3 6316C3

280MA 48 119 190 280 35 354.5 24 1087. 5 255 140 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6314C3 6314C3

280MB 48 119 190 280 35 354.5 24 1087. 5 255 140 M63X1.5 75 140 1 25 7.5 40 20 67.5 79.5 M20 6318C3 6316C3

315SA 53 140 216 315 3 5 430 28 1216 322 180 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3

315SB 53 140 216 315 3 5 430 28 1246 322 180 M63X1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

315MA 53 140 216 315 3 5 430 28 1266 322 180 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3

315MB 53 140 216 315 3 5 430 28 1296 322 180 M63X1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

315LA 53 140 216 315 4 5 430 28 1366 322 180 M63X1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3

315LB 53 140 216 315 4 5 430 28 1396 322 180 M63X1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

315CA 68 180 216 315 4 5 485 28 1484 372 200 M72X2 75 140 1 25 7.5 40 20 67.5 79.5 M20 6316C3 6316C3

315CB 68 180 216 315 4 5 485 28 1514 372 200 M72X2 95 170 160 5 48 25 86 100 M24 6322C3 6322C3

315DA 68 180 216 315 4 5 485 28 1674 372 200 M72X2 75 140 1 25 7.5 40 20 67.5 79.5 M20 6316C3 6316C3

315DB 68 180 216 315 4 5 485 28 1704 372 200 M72X2 95 170 160 5 48 25 86 100 M24 6322C3 6322C3

355MA 48 180 254 355 4 5 540 28 1605 372 230 M72X2 80 170 140 5 40 22 71 85 M20 6318C3 6318C3

355MB 48 180 254 355 4 5 540 28 1645 372 230 M72X2 100 210 180 5 48 28 90 106 M24 6322C3 6322C3

355LA 48 180 254 355 4 5 540 28 1605 372 230 M72X2 80 170 140 5 40 22 71 85 M20 6318C3 6318C3

355LB 48 180 254 355 4 5 540 28 1645 372 230 M72X2 100 210 180 5 48 28 90 106 M24 6322C3 6322C3

355CA 48 180 254 355 4 5 540 28 1795 372 230 M72X2 80 170 140 5 40 22 71 85 M20 6318C3 6318C3

355CB 48 180 254 355 4 5 540 28 1835 372 230 M72X2 100 210 180 5 48 28 90 106 M24 6322C3 6322C3

L LLFRAME

SIZEBC UB

BEARINGHE K O

SHAFT EXTENSIONBE C H HA

28

7/26/2019 Aesv

30/32

Formula Units Definitions/ Notes

Output 1HP=746W=0.746kW HP: horsepower

Current

R

EI = I in A

E: voltR: Ohm

Input power COSIEPin

= (1)

COSIEPin

3= (3)in

P in WE: voltI: ampere

Output power COSIEPout

= (1)

COSIEPout

3= (3)out

P in W: efficiency

cos : power factor

Efficiency%100%100 ==

in

lossin

in

out

P

PP

P

P

lossP in W

Power factor%100

3=

IE

Pin

COS

(3)

Synchronous speed

P

fNS

120=

sN in min

1f:frequency of the

power supplyP:poles

Slip%100=

S

S

N

NNS

N: motor speed

Torque

N

kW

T

974= T in kgf-m

1 kgf-m=9.8 N-m

Power NTP 027.1= P in W

Starting time

)(375

2

LM

S

TT

NGDt = St in sec

GD2in kgm

2

2GD : inertia of

system

MT : torque of motor

Braking time

)(375

2

LM

B

TT

NGDt

+

= Bt in sec

LT : torque of load

Reactive power absorbedby the motor

SINIEQ 3= (3) Q in VAR

Sound power level)log(10

oP

PLw =

)10( 12WPo =

Lw in dB

Sound pressure level)log(20

oP

PLp =

)102( 5

ao PP =

Lp in dB

Pa=1 N/m2

General Electrical Formulas

29

7/26/2019 Aesv

31/32

Customer Name : Company :

Contact Number :

Motor Specification Required

Efficiency Class (IE) : IE 1 IE 2 IE 3

Output : kW / HP

Voltage : Volts Frequency : ______ Hz

Poles : 2 4 6 8 Others: ________

Location : Indoor Outdoor

Mounting:

(eg. B3,V1,B35)

Ingress Protection:

IP55 IP56 Others: __________

Insulation Class

:

Class F (155 C) Class H (180 C)

Ambient Temperature : C

Temperature Rise:

Class B (80 C) Class F(105 C)

Starting Method:

Direct-On-Line Star-Delta Inverter

IEC 60034-17 Torque : Constant / Variable

IEC 60034-25 Speed Range : From: ____ To: ______ Hz

Drive Method:

Direct Coupling Belt drive Others: ________

Quantity:

Enquiry Form

Application : _________

_________

Inverter :

International Mounting Code (IM)

IM B3

(IM 1001)

IM V5

(IM 1011)

IM V6

(IM 1031)

IM B6

(IM 1051)

IM B7

( IM 1061)

IM B8

(IM 1071)

IM B5

(IM 3001)

IM V1

(IM 3011)

IM V3

(IM 3031)

IM B35

(IM 2001)

IM V15

(IM 2011)

IM V36

(IM 2031)

Foot-Mounted

Flange-Mounted Foot & Flange Mounted

30

7/26/2019 Aesv

32/32

TECO Electric & Machinery (Thai) Co., Ltd128/1 Soi Watsrivareenoi, Moo 7Bangna Trad RoadKm.18, Banchalong, BangpleeSamuthprakam 10540ThailandTel: +662 3371311 ~ 20Fax: +662 3371630 ~ 1Email: [email protected]

TECO Electric & Machinery Pte Ltd18 Chin Bee DriveSingapore 619865

Tel: +65 6265 4622 (General)Tel: +65 6263 9269 (Local Sales)Tel: +65 6263 9252 (Export Sales)

Fax: +65 6268 8651 (General)Fax: +65 6265 7354 (Local Sales)Fax: +65 6265 7354 (Export Sales)

Website teco co sg

TECO(Vietnam) Electric & Machinery Co., LtdLong Thanh Industrial ZoneLong Thanh District, Dong Nai Province

Vietnam

TECO Electric & Machinery Sdn BhdPLO 52 (No.26), Jalan Firma 2/1Kawasan Perindustrian Tebrau 1,81100 Johor Bahru, JohorMalaysiaTel: +60 7-3548008Fax: +60 7-3546107 / +60 7-3545017Email: [email protected]

PT. Teco Multiguna ElektroJl Bandengan Utara No. 83/1-2-3Jakarta 14440

Indonesia

Documents

Aesv