AEROSOL & BULK ADHESIVES

Private label formulations are an extensive part of our business. We address every aspect of research and development, production, quality control, packaging and labeling to ensure regulatory compliance. Our goal is customer satisfaction. Please contact us for consultation or quotation.

All sales are strictly limited to the terms and conditions found on Camie-Campbell, Inc.’s acknowledgment, including a limited warranty and limitations on Camie-Campbell, Inc.’s liabilities and buyer’s remedies.

All orders are subject to acceptance by Camie-Campbell, Inc. at its executive offices currently located at 1005 S. Westgate Ave., Addison, IL 60101. Write or call 800-325-9572 for current pricing, terms and conditions of sale and the name of your local distributor.

Certain Camie-Campbell aerosol and bulk adhesives are not recommended for unsupported vinyl. Certain plastic and elastomeric substrates can exhibit bond failure due to plasticizer migration. Combinations of high temperature and humidity can promote bond failure.

INDUSTRIESWE SERVE

AEROSOL & BULKADHESIVES

Manufacturing Quality Products For More Than 60 Years> Coast-to-coast availability through authorized distributors> Off-the-shelf solutions for plant maintenance & production problems> Industrial adhesives, lubricants, maintenance chemicals & mold releases> Private labeling for Camie® or custom formulas

www.camie.com800-325-9572

Camie-Campbell, Inc. is environmentally conscious and prides itself in being at the

forefront of compliance with current governmental regulatory guidelines. Our concern for the environment and worker safety is our highest priority.

Many Camie-Campbell products are available in bulk containers. Call for further information.

All aerosol products are packaged and priced 12 cans per case

1005 S. Westgate Ave. | Addison, IL 60101 | 1800-325-9572 | camie.com

Revised APRIL 2016

SCAN

To learn more about our products

http://krayden.com/

CAMIE AEROSOLS

CamieProduct

CommonUses

Net Wt.Type ofBond

ColorSpray

PatternMaximum

Service Temp.One Surface

Bond at Room Temp.

Two SurfaceBond at Room

Temp.3M Product Features

3-WayValve

300GeneralPurpose

Mist14

Temporaryor

PermanentWhite

Conicalor

Fan Mist120°F 30 Sec. to 2 Min. 15 Sec. to 2 Min.

3M Industrial Spray Adhesive

Good CoverageEconomical

No

303Foam

&Fabric Bonding

13Temporary

orPermanent

TintedOrange

WebSpray

130°F 7 Sec. to 2 Hrs. 7 Sec. to 2 Hrs. 74, 24High Performance

Soft Glue LineEasy to See

No

313Foam

&Fabric Bonding

12Temporary

orPermanent

TranslucentWeb

Spray130°F 7 Sec. to 2 Hrs. 10 Sec. to 5 Min. 74, 24

Fastest TackSoft Glue Line

No

343 Construction 14Temporary

orPermanent

TintedBlue

WebSpray

130°F 15 Sec. to 2 Hrs. 15 Sec. to 2 Hrs. 72General Purpose

Fast TackHigh Strength

No

363GeneralPurpose

Web14

Temporaryor

PermanentTranslucent

WebSpray

130°F 15 Sec. to 2 Hrs. 15 Sec. to 2 Hrs. 76Fast Tack

High StrengthGeneral Purpose

No

365Contact

TypeHi-Strength

12 Permanent TranslucentWeb


High StrengthHigh TemperatureWater Resistant

No

373Labeling, Etc.

HighPerformance

13Temporary

orPermanent

WaterWhite

Conicalor

Fan Mist120°F 7 Sec. to 5 Min. 7 Sec. to 5 Min. 77, 27

Pressure SensitiveColorless

No

378 EPS Foam and Styrofoam

15Temporary

orPermanent

TranslucentWeb

Spray140°F 30 sec. to 2 min. 30 sec. to 4 min. 78

Bonds Polystyrene Foam & Polystyrene

InsulationNo

393Headliner,

Trim &Laminating

12.5 PermanentWaterWhite

WebAdjustable

160°F Not Recommended 30 Sec. to 10 Min.Headliner

80, 90,8088, 8090, 20


Yes

BULK

CamieProduct

CommonUses

Container Sizes

Type ofBond

ColorSpray

PatternMaximum


Bond at Room Temp.Two Surface

Bond at Room Temp.Features

300BGeneralPurpose

Mist

5 Gallon55 Gallon

Temporaryor

PermanentWhite

Conicalor



313BFoam

&Fabric Bonding

1 Gallon5 Gallon55 Gallon

Temporaryor

PermanentRed, Clear

WebSpray

130°F 7 Sec. to 2 Hrs. 10 Sec. to 5 Min.Fastest Tack

Soft Glue Line

323BFoam

&Fabric Bonding


Temporaryor

PermanentRed, Clear

WebSpray


Soft Glue Line

343B Construction5 Gallon55 Gallon

Temporaryor

PermanentBlue

WebSpray

130°F 15 Sec. to 2 Hrs. 15 Sec. to 2 Hrs.General Purpose


363B High Performance Web

5 Gallon55 Gallon

Temporaryor

PermanentWhite

WebSpray

130°F 15 Sec. to 2 Hrs. 15 Sec. to 2 Hrs.High Performance

High Strength

373BHigh

Performance Mist

5 Gallon55 Gallon

Temporaryor

PermanentGrey, Red, Clear

Conicalor

Fan Mist130°F 15 Sec. to 2 Hrs. 15 Sec. to 2 Hrs.


General Purpose

390B Contact Type Web

5 Gallon55 Gallon

Permanent Red, Black, AmberWeb

Spray160°F 15 Sec. to 2 Hrs. 15 Sec. to 2 Hrs.


SHELBY AEROSOLS

ShelbyProduct

CommonUses

Net Wt.Type ofBond

ColorSpray

PatternMaximum


Bond at Room Temp.



3-WayValve

200GeneralPurpose

Mist14

Temporaryor

PermanentWhite

Conicalor




No

277Labeling, Etc.

HighPerformance

13Temporary

orPermanent

WaterWhite

Conicalor

Fan Mist120°F 7 Sec. to 5 Min. 7 Sec. to 2 Hrs. 77, 27


No

www.camie.com • [email protected] • 800-325-9572

AEROSOL & BULK ADHESIVES300 GENERAL PURPOSE SPRAY ADHESIVEOffers quick adhesion ♦ Essentially Colorless, Producing Instant Tack with High Strength to Form a Temporary or Permanent Bond

303 HI PERFORMANCE FOAM & FABRIC SPRAY ADHESIVEDesigned to Work Well on Urethane Foam, Fabric and Leather ♦ Tinted Orange and offers a Unique Lace Spray Pattern for Low Soak-In ♦ It has a Soft, Pliable Bond and a Better Build of Glue at the Bond Line

313 FAST TACK UPHOLSTERY ADHESIVEFastest Tack Time ♦ Bonds foam to foam, as well as foam-to-fabric, wood, particle board, cardboard, metal and fiberglass ♦ Web spray pattern that is clear ♦ Low soak-in and instant tack ♦ Flexible Bond Line

343 CONSTRUCTION ADHESIVEFast tack, fast grab, low soak-in adhesive ♦ Formulated to bond polyethylene to itself, concrete block, wood, and many other hard-to-bond surfaces

363 HIGH STRENGTH FAST TACK SPRAY ADHESIVESpecifically Developed as a Fast Tacking, High Strength Adhesive for a Wide Variety of Substrates ♦ Low Soak-In ♦ Pressure-Sensitivity Allows Repositioning ♦ Transparent, Lace Spray Pattern

365 HI-BOND HIGH STRENGTH SPRAY ADHESIVEA high temperature, high strength, contact-type adhesive ♦ Translucent with a lace, web-type, controlled spray pattern ♦ Low soak-in allows more adhesive to remain at surface

373 HIGH PERFORMANCE ADHESIVEColorless, Mist spray ♦ Recommended for labeling, palletizing bonding of fabric and foam ♦ Low soak in ♦ Remains pressure sensitive ♦ Excellent for a variety of jobs for industry, display and fixtures

378 FOAM SAFE ADHESIVEBonds various forms of polystyrene insulation including expanded polystyrene and extruded polystyrene ♦ Fast-drying formula that will not attack foam board ♦ Convenient for both large and small jobs

393 HEADLINER, TRIM & LAMINATING ADHESIVERecommended for all applications requiring either high strength or high temperature or both ♦ Has adjustable 3-way valve web-spray pattern ♦ Exhibits excellent green strength and water resistance

200 GENERAL PURPOSE MIST SPRAY ADHESIVEEspecially formulated to bond paper, cardboard, fabric, leather, foil, fiberglass to metal, wood, and a variety of other substrates ♦ Useful in the screen print, pool table and sewing industries

277 HIGH PERFORMANCE MIST SPRAY ADHESIVEEspecially formulated to exhibit fast, aggressive tack with low soak-in for long lasting bonds, on such substrates as foam, cloth, felt, cardboard and paper ♦ Can be used to bond light weight materials to a variety of substrates or itself

55GALLONDRUM

5GALLONPAIL

1GALLONPAIL

FEATURESAEROSOLS

BULK 300B GENERAL PURPOSE ADHESIVE General Purpose Adhesive is especially formulated to bond paper, cardboard, fabric, leather, foil, fiberglass to metal, wood and a variety of other substrates

313B FAST TACK UPHOLSTERY ADHESIVERed or Clear ♦ Non-Flammable ♦ Contains Methylene Chloride ♦ Fastest Tack Time ♦ Flexible Bond Line ♦ Bonds foam to foam, as well as foam-to-fabric, wood, particle board, cardboard, metal and fiberglass

323B FOAM & FABRIC ADHESIVERed or Clear ♦ Flammable ♦ Longer Tack Time ♦ Flexible Bond Liner For use in the foam and fabric trade for a quick tack, strong bond and a soft glue line ♦ May be used on some supported vinyls

343B CONSTRUCTION ADHESIVEFormulated to bond polyethylene to itself, concrete block, wood, and many other hard-to-bond surfaces ♦ It is tinted blue so the user can readily see where it has been applied

363B HIGH STRENGTH FAST TACK ADHESIVEFast Tacking , High Performance Web ♦ For a wide variety of substrates such as Foam, Wood, Particle Board, Fiberglass, Cardboard, and Metal ♦ Ideal for label applications

373B HIGH PERFORMANCE ADHESIVEGray, Red or Clear ♦ Especially formulated to exhibit fast, aggressive tack with low soak-in for long-lasting bonds, on such substrates as foam, cloth, felt, cardboard, and paper

390B CONTACT CEMENT & TRIM ADHESIVEA sprayable or brushable elastomeric contact adhesive formulated for adhering supported vinyl to coated finishes and laminates to wood, metal, etc.

CAMIE AEROSOLS

CamieProduct

CommonUses

Net Wt.Type ofBond

ColorSpray

PatternMaximum


Bond at Room Temp.



3-WayValve

300GeneralPurpose

Mist14

Temporaryor

PermanentWhite

Conicalor




No

303Foam

&Fabric Bonding

13Temporary

orPermanent

TintedOrange

WebSpray

130°F 7 Sec. to 2 Hrs. 7 Sec. to 2 Hrs. 74, 24High Performance

Soft Glue LineEasy to See

No

313Foam

&Fabric Bonding

12Temporary

orPermanent

TranslucentWeb


Fastest TackSoft Glue Line

No

343 Construction 14Temporary

orPermanent

TintedBlue

WebSpray

130°F 15 Sec. to 2 Hrs. 15 Sec. to 2 Hrs. 72General Purpose


No

363GeneralPurpose

Web14

Temporaryor

PermanentTranslucent

WebSpray

130°F 15 Sec. to 2 Hrs. 15 Sec. to 2 Hrs. 76Fast Tack

High StrengthGeneral Purpose

No

365Contact

TypeHi-Strength

12 Permanent TranslucentWeb



No

373Labeling, Etc.

HighPerformance

13Temporary

orPermanent

WaterWhite

Conicalor

Fan Mist120°F 7 Sec. to 5 Min. 7 Sec. to 5 Min. 77, 27


No

378 EPS Foam and Styrofoam

15Temporary

orPermanent

TranslucentWeb

Spray140°F 30 sec. to 2 min. 30 sec. to 4 min. 78

Bonds Polystyrene Foam & Polystyrene

InsulationNo

393Headliner,

Trim &Laminating

12.5 PermanentWaterWhite

WebAdjustable

160°F Not Recommended 30 Sec. to 10 Min.Headliner

80, 90,8088, 8090, 20


Yes

BULK

CamieProduct

CommonUses

Container Sizes

Type ofBond

ColorSpray

PatternMaximum


Bond at Room Temp.Two Surface

Bond at Room Temp.Features

300BGeneralPurpose

Mist

5 Gallon55 Gallon

Temporaryor

PermanentWhite

Conicalor



313BFoam

&Fabric Bonding


Temporaryor

PermanentRed, Clear

WebSpray


Soft Glue Line

323BFoam

&Fabric Bonding


Temporaryor

PermanentRed, Clear

WebSpray


Soft Glue Line

343B Construction5 Gallon55 Gallon

Temporaryor

PermanentBlue

WebSpray

130°F 15 Sec. to 2 Hrs. 15 Sec. to 2 Hrs.General Purpose


363B High Performance Web

5 Gallon55 Gallon

Temporaryor

PermanentWhite

WebSpray

130°F 15 Sec. to 2 Hrs. 15 Sec. to 2 Hrs.High Performance

High Strength

373BHigh

Performance Mist

5 Gallon55 Gallon

Temporaryor

PermanentGrey, Red, Clear

Conicalor

Fan Mist130°F 15 Sec. to 2 Hrs. 15 Sec. to 2 Hrs.


General Purpose

390B Contact Type Web

5 Gallon55 Gallon

Permanent Red, Black, AmberWeb

Spray160°F 15 Sec. to 2 Hrs. 15 Sec. to 2 Hrs.


SHELBY AEROSOLS

ShelbyProduct

CommonUses

Net Wt.Type ofBond

ColorSpray

PatternMaximum


Bond at Room Temp.



3-WayValve

200GeneralPurpose

Mist14

Temporaryor

PermanentWhite

Conicalor




No

277Labeling, Etc.

HighPerformance

13Temporary

orPermanent

WaterWhite

Conicalor

Fan Mist120°F 7 Sec. to 5 Min. 7 Sec. to 2 Hrs. 77, 27


No

www.camie.com • [email protected] • 800-325-9572

AEROSOL & BULK ADHESIVES300 GENERAL PURPOSE SPRAY ADHESIVEOffers quick adhesion ♦ Essentially Colorless, Producing Instant Tack with High Strength to Form a Temporary or Permanent Bond

303 HI PERFORMANCE FOAM & FABRIC SPRAY ADHESIVEDesigned to Work Well on Urethane Foam, Fabric and Leather ♦ Tinted Orange and offers a Unique Lace Spray Pattern for Low Soak-In ♦ It has a Soft, Pliable Bond and a Better Build of Glue at the Bond Line

313 FAST TACK UPHOLSTERY ADHESIVEFastest Tack Time ♦ Bonds foam to foam, as well as foam-to-fabric, wood, particle board, cardboard, metal and fiberglass ♦ Web spray pattern that is clear ♦ Low soak-in and instant tack ♦ Flexible Bond Line

343 CONSTRUCTION ADHESIVEFast tack, fast grab, low soak-in adhesive ♦ Formulated to bond polyethylene to itself, concrete block, wood, and many other hard-to-bond surfaces

363 HIGH STRENGTH FAST TACK SPRAY ADHESIVESpecifically Developed as a Fast Tacking, High Strength Adhesive for a Wide Variety of Substrates ♦ Low Soak-In ♦ Pressure-Sensitivity Allows Repositioning ♦ Transparent, Lace Spray Pattern

365 HI-BOND HIGH STRENGTH SPRAY ADHESIVEA high temperature, high strength, contact-type adhesive ♦ Translucent with a lace, web-type, controlled spray pattern ♦ Low soak-in allows more adhesive to remain at surface

373 HIGH PERFORMANCE ADHESIVEColorless, Mist spray ♦ Recommended for labeling, palletizing bonding of fabric and foam ♦ Low soak in ♦ Remains pressure sensitive ♦ Excellent for a variety of jobs for industry, display and fixtures

378 FOAM SAFE ADHESIVEBonds various forms of polystyrene insulation including expanded polystyrene and extruded polystyrene ♦ Fast-drying formula that will not attack foam board ♦ Convenient for both large and small jobs

393 HEADLINER, TRIM & LAMINATING ADHESIVERecommended for all applications requiring either high strength or high temperature or both ♦ Has adjustable 3-way valve web-spray pattern ♦ Exhibits excellent green strength and water resistance

200 GENERAL PURPOSE MIST SPRAY ADHESIVEEspecially formulated to bond paper, cardboard, fabric, leather, foil, fiberglass to metal, wood, and a variety of other substrates ♦ Useful in the screen print, pool table and sewing industries

277 HIGH PERFORMANCE MIST SPRAY ADHESIVEEspecially formulated to exhibit fast, aggressive tack with low soak-in for long lasting bonds, on such substrates as foam, cloth, felt, cardboard and paper ♦ Can be used to bond light weight materials to a variety of substrates or itself

55GALLONDRUM

5GALLONPAIL

1GALLONPAIL

FEATURESAEROSOLS

BULK 300B GENERAL PURPOSE ADHESIVE General Purpose Adhesive is especially formulated to bond paper, cardboard, fabric, leather, foil, fiberglass to metal, wood and a variety of other substrates

313B FAST TACK UPHOLSTERY ADHESIVERed or Clear ♦ Non-Flammable ♦ Contains Methylene Chloride ♦ Fastest Tack Time ♦ Flexible Bond Line ♦ Bonds foam to foam, as well as foam-to-fabric, wood, particle board, cardboard, metal and fiberglass

323B FOAM & FABRIC ADHESIVERed or Clear ♦ Flammable ♦ Longer Tack Time ♦ Flexible Bond Liner For use in the foam and fabric trade for a quick tack, strong bond and a soft glue line ♦ May be used on some supported vinyls

343B CONSTRUCTION ADHESIVEFormulated to bond polyethylene to itself, concrete block, wood, and many other hard-to-bond surfaces ♦ It is tinted blue so the user can readily see where it has been applied

363B HIGH STRENGTH FAST TACK ADHESIVEFast Tacking , High Performance Web ♦ For a wide variety of substrates such as Foam, Wood, Particle Board, Fiberglass, Cardboard, and Metal ♦ Ideal for label applications

373B HIGH PERFORMANCE ADHESIVEGray, Red or Clear ♦ Especially formulated to exhibit fast, aggressive tack with low soak-in for long-lasting bonds, on such substrates as foam, cloth, felt, cardboard, and paper

390B CONTACT CEMENT & TRIM ADHESIVEA sprayable or brushable elastomeric contact adhesive formulated for adhering supported vinyl to coated finishes and laminates to wood, metal, etc.

http://krayden.com/

Private label formulations are an extensive part of our business. We address every aspect of research and development, production, quality control, packaging and labeling to ensure regulatory compliance. Our goal is customer satisfaction. Please contact us for consultation or quotation.

All sales are strictly limited to the terms and conditions found on Camie-Campbell, Inc.’s acknowledgment, including a limited warranty and limitations on Camie-Campbell, Inc.’s liabilities and buyer’s remedies.

All orders are subject to acceptance by Camie-Campbell, Inc. at its executive offices currently located at 1005 S. Westgate Ave., Addison, IL 60101. Write or call 800-325-9572 for current pricing, terms and conditions of sale and the name ofyour local distributor.

Certain Camie-Campbell aerosol and bulk adhesives are not recommended for unsupported vinyl. Certain plastic and elastomeric substrates can exhibit bond failure due to plasticizer migration. Combinations of high temperature and humidity can promote bond failure.

INDUSTRIESWE SERVE

AEROSOL & BULKADHESIVES

Manufacturing Quality Products For More Than 60 Years > Coast-to-coast availability through authorized distributors > Off-the-shelf solutions for plant maintenance & production problems > Industrial adhesives, lubricants, maintenance chemicals & mold releases > Private labeling for Camie® or custom formulas

www.camie.com800-325-9572

Camie-Campbell, Inc. is environmentallyconscious and prides itself in being at the

forefront of compliance with current governmental regulatory guidelines. Our concern for the environment and worker safety is our highest priority.

Many Camie-Campbell products are available in bulk containers. Call for further information.

All aerosol products are packaged and priced 12 cans per case

1005 S. Westgate Ave. | Addison, IL 60101 | 1800-325-9572 | camie.com

Revised APRIL 2016

SCAN

To learn more about our products

Documents

AEROSOL & BULK ADHESIVES