Embed Size (px)
Citation preview
Objectives
Advancing Metals TechnologyContinuous casting R&D facilities for hire
■ Test casting of new alloy compositions
■ Experimenting with new tooling designs & continuous casting techniques
■ Investigation of new process production sequences
■ Sample manufacture to develop process route and confirm quality of end product
■ Extensive analysis & testing facilities available
■ To shorten manufacturing process route
■ To reduce capital cost of equipment to produce end product
■ To minimise operating cost per tonne
■ To achieve higher quality product & tighter alloy tolerance control
■ To reduce “critical mass” production volume requirements
RS 080
Capabilities
RM 050
Spectrometer
SpectrometerTensile TesterTensile Tester
www.rautomead.com
Rautomead Limited, Nobel Road, Wester Gourdie Industrial Estate, Dundee DD2 4UH, Scotland, UKTel: +44 (0)1382 622341 Fax: +44 (0)1382 622941 email: [email protected]
March 2014
Facilities
■ RS 080 single strand casting machine
■ RM 050 horizontal casting machine
■ “Spectro” spectrometer
■ Tensile/elongation testing facilities: 8-30mm dia.
■ Conductivity/resistance testing facilities
■ SEM
■ EDX
■ Optical microscope
