Upload
duongkhuong
View
223
Download
0
Embed Size (px)
Citation preview
TI Information – Selective Disclosure
Advanced Wireless and Sensing Solutions for IoT Johnson Ng Marketing Director Analog Automotive Solutions Marketing Asia Pacific
TI Information – Selective Disclosure
The IoT will impact all segments
Industrial Auto
Home Fitness and Healthcare
TI Information – Selective Disclosure
IoT – The United Nations of connectivity
C H AL L E N G E W H AT I S N E E D E D
Connectivity:
One size doesn’t fit all
Broad variety of wired or
wireless standards
T I D E L I V E R S
• Low power & long range
• Proprietary & open protocols
• Metering, security systems
• Low power mesh network
• Smart metering & lighting
• Moving into home automation
• Fast, low latency Ethernet
• Real-time industrial control
• Information technology
• Fast – 10Mbps++
• Direct Internet connection
• Home & enterprise apps
• Data over power lines (OFDM)
• Developed for smart grid
• Lighting, solar, appliances
• Lowest power
• Connect to tablet/phone
• Moving to industrial, automotive
2.4GHz IEEE 802.15.4
IEEE P1901.2
TI Information – Selective Disclosure
Only TI has all the IoT building blocks
Processors MCUs
Wired &
Wireless
Connectivity
Sensors
Analog
Signal
Chain
Power
Management
Nodes
MCUs
Processors Wired &
Wireless
Connectivity
Multicore
Processors
Analog
Signal
Chain
Power
Management
Analog
Signal
Chain
Power
Management
Cloud
Gateway,
Bridge or
Router
TI Information – Selective Disclosure
CC26xx/CC13xx Ultra Low Power Wireless MCUs The First Multi-standard Wireless MCU Platform for the IoT, Five technologies, one architecture
5
QFN package options:
4x4mm, 5x5mm, 7x7mm
ARM®
Cortex®-M3
Radio
SCE
Peripherals / modules
Application MCU
• Application
• Profiles / services
• TI RTOS
• Peripheral drivers and
libraries
• Royalty free protocol
stacks
Peripherals / modules
• DC/DC converter
• Temp/battery monitor
• AES
• GPIO
• Timers
• UART / SPI
• I2C / I2S
• DMA
Sensor controller engine
• ADC and comparators
• Digital sensor readings
• Capacitive sensing
Radio
• Sensitivity -97dBm BLE
• Power output:
• +5dBm @ 2.4 GHz
• +15dBm @ Sub-1 GHz
• Integrated firmware
• LinkLayer in ROM
Memory
Memory
• 128 KB Flash
• 8 KB cache
• 20 KB SRAM
TI Information – Selective Disclosure 6
SimpleLink CC26xx/CC13xx Architecture
Quick Facts Ultra-low Power Consumption • 61 µA/MHz ARM Cortex M3 • 8.2 µA/MHz Sensor Controller • 1 µA sleep with retention and RTC • 5.9 mA RX (single-ended) • 6.1 mA TX (single-ended) • <3uA while running 10 ADC samples/s SoC Key Features • Autonomous sensor controller engine • 4x4, 5x5, and 7x7 mm QFN • 1.7 - 1.95 V or 1.8 – 3.8 V supply range • 128 KB Flash + 8 KB Cache • 20 KB RAM
RF Key Features • +5/+14 dBm output power (2.4GHz/Sub1GHz)
• -97/-120 dBm sensitivity (2.4GHz/Sub1GHz) • Supports 2.4GHz and 915/868/433 MHz • Pin compatible and SW compatible across protocols
and frequency bands
CC2640
Bluetooth Smart
CC2630
6LoWPAN / ZigBee
CC2650
Multi-standard
CC1310
Sub-1GHz
TI Information – Selective Disclosure PL Contact: Joy Taylor
Products Features Applications
• SimpleLinkTM Wireless MCU
• CC2640 (M3 Ultra Low Power)
• CC2540 (8051 USB interface)
• CC2541 (8051 I2C interface)
• CC2540T (8051 125°C)
• CC2564 (8051 Classic + BLE)
• Apps developer tools
• Many TIDesigns
• Lowest Power down to 1/10th of BT Classic
• Run BT stack and application on one single chip down to 4x4mm QFN package
• Fully Featured BT4.1 LE Stack
• Industrial and extended temp
range: -40 to 85 C and 125 C
• Automotive qualification option
• Home and building
• Health and medical
• Remote
• Industrial
• Easiest to design with: Complete SW stack, wiki guides,
dynamic design kits, low-cost tools, & software starting points
• Lowest Power: Multi-year operation on smaller coin-cell
• The most Integrated: single chip wireless MCU, integrated
flash, small package SensorTag
Value Propositions
Large Tools and ref designs Ecosystem
TI Bluetooth Smart Wireless MCU Portfolio
TI Information – Selective Disclosure
SimpleLink™ Wi-Fi® platform Lowest power, programmable wireless MCU, easiest to use
Products Features Applications • CC3200 (Wireless MCU)
• Integrated ARM Cortex-M4
MCU + Wi-Fi network
processor
• First programmable single
chip Wi-Fi solution
• CC3100 (Internet-on-a-chip Wi-Fi network processor)
• Embedded TCIP/IP stack
• Connect any MCU to the
Internet of Things
• On-chip Internet & Wi-Fi security
• Wireless MCU separate from
TCP/IP Stack, free for customer
applications
• Flexible provisioning such as
SmartConfig, WAC, & AP Mode
• Cloud supported
• FCC/CE/ETSI certified modules
• SDK for development with Code
Composer Studio and IAR support
• Internet of Things (IoT)
• Home automation & appliance
• Safety and security
• Smart energy
• Industrial M2M communication
• Wireless audio streaming
Value Propositions
• The lowest power: Run for over a year on two AA
batteries
• First single chip programmable Wi-Fi solution: Add
Wi-Fi to any system
• Easiest to design with: No Wi-Fi experience needed;
HW designs, 30+ software examples, extensive
documentation and TI E2E support forum all readily
available
TI Information – Selective Disclosure
Sub-1 GHz Industrial 169/ 315/ 433/ 470/ 868/ 915/ 920 MHz solutions
• SimpleLink MCU: CC1310
• Smart RF transceiver CC1120
• Smart RF transceiver for 802.15.4.g: CC1200
• Smart RF transceiver for ultra narrowband: CC1125
• 850~950MHz Range Extender: CC1190
• Software stacks
• Free SimpliciTI software stack
• wM-Bus software
• Longest real-world range: Beyond 25km range, full-building
to city-wide RF coverage
• Robust low-power communication: Less retransmissions of
RF packets means less power consumption in the application
• Supports more standards: 6LoWPAN, 802.15.4g, WiSun,
wM-Bus, ETSI Cat 1, FCC Part 90 and more
Long range, Robust link
TI Information – Selective Disclosure
WilinkTM Combo solutions high-performance WiFi + Bluetooth/Bluetooth Low Energy
Products Features Applications
• WL18xx Combo
• WiFi Only
• WiFi + BT/BLE
• WiFi + BT/BLE + GNSS
• TI Modules • WL1801MOD WiFi
• WL1805MOD WIFI MIMO
• WL1807MOD WIFI+5G SISO
• WL1831MOD WIFI+BT/BLE
• WL1835MOD WIFI MIMO+BT/BLE
• WL1837MOD WIFI+ BT/BLE+5G SISO
• 3d Parties modules
• Combo BT Dual Mode + WiFi
on one single-chip
• Rock solid performance: long
distance, stability, robustness,
throughput and co-existence
with BT 4.0
• Connect to processors(high
level OS)
• Industrial temp -40 to 85 C
• 2.4GHz and 5GHz support
• Fully certified module (FCC, IC,
CE, Telec)
• Security Camera
• Portable Data Terminal
• Gateways
• Audio
• Industrial Panel/ HMI
• Professional Camera
• Wearable
Value Propositions Tools/modules
for easy development Performance and low power: 100Mbps with the lowest power (800uA
IDLE)
Certified and easy to use: Pre-integrated, certified, production ready
solutions, software downloadable. Open documentation (Wiki), Forums
(E2E), TI and 3rd party network
Integrated and scalable: single chip multi-combo with pin to pin compatible
variants, consumer, industrial (85 degree C) and automotive grade (Q100)
TI Information – Selective Disclosure
Top 3 Wireless Connectivity Technologies
• Longest Range, Robust, Low Power
• Proprietary and open , protocols (e.g. 6LoWPAN)
• Sensor Network, security system
• Easiest to use, Low power, Integration
• Control applications through smartphone/tablet
• industrial, extended temp, automotive qualified
• Cortex M MCU integrated, Easiest to use, Low Power
• Home and enterprise, industrial Internet of Things (IoT
And More…
CC2540/41 CC2540T CC2640
CC3100 CC3200 WL180x/3x
CC1200 CC1120 CC1310
CC2560/4B CC2564M
ODN
CC2564M
ODA
WL1807/37
CC2650
hot
hot hot
New
hot
BLE+ Classic BT BLE BLE BLE 2.4GHz Multi std
TI Information – Selective Disclosure
T
TI Sensing Solutions for Internet Of Things
Temp & Humidity
Sensor TMPXXX, LMTXX,
HDC10XX
Capacitive
Sensing FDCXXXX
Ambient Light
Sensor OPT3001
Ultrasonic
Sensing TDC1XXX, PGA450
Gas Sensing LMP91xxx
Hall Sensor DRV5xxx
Inductive
Sensing LDCXXXX
Heart Rate
Monitoring AFE44XX
Sensors Sensor Analog Front Ends
TI Information – Selective Disclosure
Completely integrated humidity and
temperature IC provides guaranteed
performance
Fully calibrated sensor enables quick time-to-
market
Very low power consumption
Small package size supports compact
designs
Applications
HVAC
White goods (dryer, fridge, microwave, dishwasher)
Printers
Handheld Meters
Camera Defog
Smart Thermostats and Room Monitors
Medical Devices
Features Benefits
HDC1080 Humidity & Temperature Sensor
Relative Humidity Range 0% to 100%
Humidity Accuracy ±2% up to 85C
Typical Drift < 0.5%/yr
Supply Current (Measuring) 190uA
Avg Supply Current (@1sps)
11bit RH & Temp 1.3uA typ
11bit Temp 710nA typ
Sleep Mode Current 100nA typ
Temperature Accuracy ±0.2ºC
Temperature Range (Operating) -20ºC to +85ºC
Temperature Range (Functional) -40ºC to +125ºC
Operating Voltage 2.7V to 5.5V
Package 6 pin DFN (3mm x 3mm)
TIDA-00484 Humidity &
Temperature Sensing Node for
Sub-1 GHz Star Networks
Enabling 10+ Year Coin Cell
Battery Life
TI Information – Selective Disclosure
Analog Temperature Sensors
14
LMT8X/90 Low Cost Analog Temp Sensor Operating Temperature −50°C to 150°C
• Temperature accuracy/error:
±0.13°C max at 30°C
±0.36°C max from -55°C to 150°C
• ±0.1°C matching of two LMT70A
• Power supply 2.0V to 5.5V
• Power supply current <12uA
• Linear output slope: -5.19mV/°C
• Output enable switch
• 0.88mm x 0.88mm WLCSP package
LMT70/LMT70A High Precision Analog Temp Sensor Operating Temperature −50°C to 150°C
LMT70A in Building Management
LMT70 in
Body Temp
Measurement
TI Information – Selective Disclosure
Digital Interface Temp Sensors
15
RX
15
LMT007 Non-Contact Temperature Sensing IR Thermopile Sensor in WCSP package with Math Engine
Integrated Thermopile With Analog Front End 16-Bit ADC with I2C SMBus interface
Integrated Local Temp. and Voltage Reference
Integrated Math Engine with NV Memory
Ultra-Small Package: 1.9mmx1.9mm WCSP
Profile 0.625mm (Max)
Industry’s Low Power Quiescent Power 270μA
Shutdown Power: 2μA
Supply: 2.3V to 5.5V
LMT01 2-Pin/Wire: Current-Pulse Counter
- using just 2 pins, no dedicated Vcc or GND ±0.5°C at -10°C to +50°C (max error)
±1.0°C at -20°C to +100°C
±2.0°C at -50°C to +150°C
TMP107 -50 SMAART Wire™: UART Based Daisy-Chain, Max 32 nodes per
string, Max 3 Meter cable length per node • High accuracy: ±0.4°C max @ -20°C - 70°C
±0.55°C max @ -40°C - 100°C
±0.7°C max @ -55°C - 125°C
TI Information – Selective Disclosure
OPT3001: Ambient Light Sensor
• High Performance Optical Filtering To Match The
Human Eye. Over 99% IR rejection
• Broad Capabilities:
– Wide Dynamic Range: 0.01 Lux to 83k Lux
– 23-Bit Effective Resolution
• Automatic Gain Configuration
• Ultra Low Power & Small Packaging
– Supply Range: 1.6V to 3.6V
– Quiescent Current: 2.5uA (max)
– Shutdown Current: 1uA (max)
– 2.0 x 2.0mm
Features
Applications
• Backlight Control – Thermostat, Notebook, Tablets
• Outdoor Displays – Digital Signage, Sporting Equipment with
displays
• Building Automation – Daylight Sensors & Artificial lighting control
Benefits
• Directly reports out Lux equivalent to what the human eye
perceives regardless of light source (Sun, Halogen,
Incandescent, Fluorescent, LED)
– Strong IR rejection helps maintain accuracy when
sensor is placed behind dark glass
• High resolution even at low light levels
• Simplifies system design
– Automatically maximize full scale range of ADC in all
lighting conditions
V2
0.0
0.5
1.0
300 500 700 900
Wavelength [nm]
TI Information – Selective Disclosure
AFE4404 is a ultra small AFE , simultaneous
Support of 3 LED for wearable Bio-sening: • Heart-Rate Monitoring (HRM)
• Multi-Wave length HRM
• Saturation of Peripheral Capillary Oxygen ( SpO2)
Package: 3.6mmx1.6mm DSBGA
AFE4403 is a single chip front end
TX/RX solution for photometry: • Optical Heart-Rate Monitoring
(HRM)
• Step Counting
• Fitness Wearables
• Smart Watches
AFE4403/4 AFE for Optical Heart Rate Monitor & Pulse-Oximeter
CC2650
Multi -standard
2.4GHz M3 MCU
AFE4404 + CC2650
Optical Heart Rate
+ Pedometer Reference Design
AFE4403
AFE4404
TI Information – Selective Disclosure
Advantages of Inductive Sensing:
Does not require magnets, Reliable by virtue of being contactless
Insensitive to environmental contaminants (dust, dirt, etc.)
Sub-micron resolution, Sensor is low-cost
Electronics can be located remotely from the sensor
TI Hall and Inductive Sensing Solutions
LDCINDUCTANCE TO DIGITALCONVERTER
DRV5xxx Hall Sensors LDC1xxx
Inductive Sensing AFE Input L (bit) Rp (bit) I/O
LDC1000 1ch 24 16 I2C
LDC1041 1ch 24 8 I2C
LDC1051 1ch 0 8 I2C
LDC1101 1ch 16/24 16 SPI
LDC1612 2ch 28 0 I2C
LDC1614 4ch 28 0 I2C
LDC1312 2ch 12 I2C
LDC1314 4ch 12 I2C
LDC0851 1ch switch
TI Information – Selective Disclosure
FDC2xxx Capacitive Sensing
Markets
• White goods
• Industrial
• Automotive
• Personal electronics
Detect presence, simple gestures
EMI-resistant Proximity &
Gesture
Markets
• Industrial
• Automotive
Detect object in path of motion
Collision avoidance
Detect all liquids, soap, ink
Markets
• White goods
• Automotive
• Medical
• Printer
Liquid level sensing
Markets
• White goods
• Industrial
• Automotive
Detect leaks, rain/fog, ice
buildup
Ice/water/rain detection
Proximity Sensing Liquid Sensing
Right Left FDC CAPACITANCE TO DIGITAL
CONVERTER
Up
Down
• Maximum Input Capacitance: 250nF (@10kHz with 1mH inductor)
• Number of channels: 2 (FDC2x12), 4 (FDC2x14)
• Maximum output rates :13.3ksps (FDC211x), 4.08ksps (FDC221x)
• Resolution: 28-bit (FDC221x), 12-bit (FDC211x)
• Noise Floor: 0.3fF (100sps, FDC221x)
• Sensor excitation frequency: 10kHz to 10MHz
• Supply voltage: 2.7V to 3.6V
• Interface: I2C
Gesture Sensing
TI Information – Selective Disclosure
Ultrasonic SensorAFE
Smart Water and Gas Flow Meter • Picosecond accuracy to measure zero flow
• Low power consumption extends life of
battery powered meters
• Programmable gain amplifiers for varying
pipe sizes
Ultrasonic Sensor module for: • Drone Collision Warning
• Automotive Parking Sensor
• Industrial Automation
Consumer IoT Level Measurements • Measurements of oily/filmy liquids
• Non-invasive measurements from bottom
of the tank
• Low power consumption for battery
powered installations
20
Fluid Level and Concentration • Measurement of fluid level <1mm
accuracy
• Level and identification of fluids
• Non-invasive sensing of any liquid through
any tank material
• 0.1 - 200cm, 0.1cm resolution
• 2.7 - 5.5V ; Iq = 0.16µA
• 40 V Load Dump Protection
• Driver: 0.2 WMAX
• Receiver: 41dB Gain
• Fixed Function State Machine
• Start/Stop Pulse Data Output
• TDC1000-Q1
• 10 - 600cm, 1cm resolution
• 7 -18V ; Iq = 5mA
• 40 V Load Dump Protection
• Driver: 12 WMAX
• Receiver: 64dB Gain
• Programmable 8051 MCU
• LIN/UART/IO Data Interface
PGA450-Q1
TI Information – Selective Disclosure
LMP910xx Gas SensorAFE with Sensor Diagnostic
Chemical Cell
Sensor
Applications Markets & Applications
LMP91000/02 Toxic Gas
Safety
• Mining Portable Gas Detectors
• Air quality and Gas detection
Home
automation
• Wireless sensor nodes
NDIR Sensor Applications Markets & Applications
LMP91050/51 Air Quality
Monitoring
• HVAC ventilation monitoring
• Gas Leak Detections
• PMI2.5/10 Detection
Agriculture • Greenhouse farming
White goods • Self-cleaning oven
Automotive • Alcohol breathalyzer
• Cabin CO2 Monitoring
Medical • Patient monitoring for
Anesthesiology
Q I2C INTERFACE
AND
CONTROL
REGISTERS
RE
VREF VDD
AGND
CE
WE VOUT
C1
SCL
TEMP
SENSOR
VREF
DIVIDER
C2
SDA
RLoad
VARIABLE
BIASMENB
DGND
A1+
-
TIA+
-
RTIA
CE
WE
RE
3-Lead
Electrochemical
Cell
CONTROLLER
LMP91000, 91002 for Chemical Gas Sensor
O2 , Toxic Gas CO, CO2, H2S LMP91050 for NDIR Gas Sensor
Alcohol, CO2, Air Quality
CC2541 BLE Oxygen BLE Sensor Node
TI Information – Selective Disclosure
For more information, pls visit www.ti.com
Thank You
22