Upload
lenga
View
258
Download
2
Embed Size (px)
Citation preview
QuickFIT®
Advanced Engine Oil Change System.
Safer, Cleaner Oil Changes. 70 Percent Less Time.
Oil changes are messy and time-consuming.
Removing hot filters and crawling around or under
equipment is hazardous to technicians. When
there are spills, environmental contamination fines
can become a significant financial liability. Using
current standard maintenance procedures, an oil
change can take well over an hour on each piece
of equipment. The QuickFIT Advanced Engine Oil
Change System provides a simple, clean and cost-
effective solution to all of those issues.
How It Works:
The QuickFIT system uses a patented process
with a single fitting that allows you to purge filters,
evacuate the sump and refill the engine through the
same fitting. Air pressure purges oil out of the filter
to eliminate hot-oil spills. The oil is evacuated directly
into the final containment unit in a sealed system.
The engine and filter are then refilled with fresh oil
through the fitting, providing complete contamination
control.
A typical piece of equipment can be fully serviced
in under 30 minutes – less than half the amount of
time it takes when using conventional oil change
methods.
Productivity goes up, the risk of spills goes down,
and the cost of cleanup materials and the potential
for contamination are eliminated.
Advantages Of The QuickFIT Advanced Engine Oil Change System:
Field tests, which included the QuickFIT system
installation on multiple power generators,
demonstrated significant benefits over current oil
change procedures:
n 60 percent to 70 percent overall time savings
n Substantial reduction in safety hazards by
eliminating risks from climbing ladders, crawling
under equipment and lifting and handling hot oil
n 79 percent reduction in time-wasting actions,
resulting in a more efficient process
n Zero oil spills
QuickFIT®
Advanced Engine Oil Change System.
Purge.Compressed air purges the
old filters of residual oil so
that they can be removed
with no risk of spills and
clean filters can be quickly
installed.
Evacuate.Old, contaminated oil
is quickly and cleanly
transferred to the disposal
unit in a safely sealed system,
preventing environmental
contamination. Technicians
never handle the hot oil,
which eliminates the potential
for burns and spills.
Refill.New oil enters the engine
through the fitting, passing
through the filter. The sump
and filter are automatically
filled to the correct level with
fresh, filtered oil.
THREE SIMPLE STEPS.
1.
2.
3.
Our energy working for you.™power.cummins.com
All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. “Our energy working for you.” is a trademark of Cummins Power Generation. QuickFIT is a registered trademark of RPM Industries LLC. Other company, product or service names may be trademarks or service marks of others. Specifications are subject to change without notice.
NASB-6250-EN (11/16)
A Better System Backed By Better Support.
With 6,000 branch locations in more than 190 countries, Cummins has expert distributors available to provide you with application assistance, on-site commissioning, troubleshooting, maintenance and aftermarket services. We are the only point of contact for all your power system needs throughout its life cycle.
North America 1400 73rd Ave. NEMinneapolis, MN 55432, USA
Phone: 1 763 574 5000Fax: 1 763 574 5298
Africa Building No. 8Harrowdene Office ParkWoodmead, Johannesburg, South Africa
Phone: 27 11 589 8400Fax: 27 11 589 8468
Asia Pacific10 Toh Guan Road, #07-01Singapore 608838
Phone: 65 6417 2388Fax: 65 6417 2399
Caribbean 3350 Southwest 148th Ave., Suite 205 Miramar, FL 33027, USA
Phone: 1 954 431 5511Fax: 1 954 433 5797
East AsiaNo. 2 Rongchang East Station Beijing Economic and Technological Development AreaBeijing 100176, P.R. China
Phone: 86 10 5902 3000Fax: 86 10 5902 3199
Europe, CIS and RussiaManston Park Columbus Ave.Manston Ramsgate, Kent CT12 5BF, UK
Phone: 44 1843 255000Fax: 44 1843 255902
India Tower A, 6th FloorSurvey No. 21, BalewadiPune 411 045, Maharashtra, India
Phone: 91 20 67067000Fax: 91 20-67067011/16
Mexico and Central America Eje 122 No. 200 Zona Industrial San Luis Potosí, S.L.P. 78395, Mexico
Phone: 52 444 870 6700Fax: 52 444 824 0082
Middle East Jebel Ali Free Zone South Zone 2 P.O. Box 17636Dubai, United Arab Emirates
Phone: 971 4 880 9911Fax: 971 4 886 0518 / 9
South America Rua Jati, 310, CumbicaGuarulhos, SP 07180-900, Brazil
Phone: 55 11 2186 4195Fax: 55 11 2186 4729