2
ADVANCED DYNAMIC OXYGEN MASK www.camlockuk.com TECHNICAL DATA SHEET FLIGHT TO COMBAT ADOM FC BAEs – Striker II Helmet-Mounted Display (HMD) with the ADOM oxygen mask as a critical element of the integrated life support system.

ADVANCED DYNAMIC OXYGEN MASK - camlockuk.com

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: ADVANCED DYNAMIC OXYGEN MASK - camlockuk.com

ADVANCED DYNAMIC OXYGEN MASK

www.camlockuk.com

TECHNICAL DATA SHEET

FLIGHT TO COMBAT

ADOMFC

BAEs – Striker II Helmet-Mounted Display (HMD) with the ADOM oxygen mask as a critical element of the integrated life support system.

Page 2: ADVANCED DYNAMIC OXYGEN MASK - camlockuk.com

TECHNICAL SPECIFICATIONS

Standards ASIC – ASMG 4068 / MAA – Def Stan 00970 NPA/2012-003

Head supported mass 204g (Small – Blue)214g (Medium/Large – Red)

Sizes: Two (2) ID colour codes: Blue – Small / Red – Medium/LargeThe reduced size of oxygen mask cavity decreases the CO2 dead space volume

Temperature range Operational: –40°C (–40°F) to +70°C (+158°F) at 5 - 100% RHNon Operational/Storage: +3°C (+37°F) to +22°C (+72°F) at 65% RH max

Helmet compatibility HGU-55/P, HGU-68/P, HGU-84/P, HGU-56/P, ALPHA 200 Series, ALPHA 300 Se-ries, ALPHA 700 Series and ALPHA 900 Series – NVG & HMD compatible

Dynamic performance Pressure Breathing at Altitude (PBA) – 72mm Hg at 60,000ft Pressure Breathing with G (PBG) – 60mm Hg at 9Gz and onset rates under flight conditions of 8G.sec and 15g.sec

Shelf life Exceeds the requirements of MIL Spec 810E

PRODUCT INTERFACES

Helmet attachment Bayonet type or Mask Quick Release (MQR)

Communications 5 ohm, 75 ohm and 150 ohm – Dynamic or Electret

Cam Lock Ltd10 Springlakes Industrial EstateAldershot, Hampshire GU12 4UHUnited KingdomT: +44 (0)1252 366 648E: [email protected]

Cam Lock Middle East LLCPO Box 51, PC 124Al Rusayl, MuscatSultanate of OmanT: +968 24253055E: [email protected]

Cam Lock North America IncSuite 300 160 Quarry Park Boulevard S.E.Calgary, Alberta, Canada T2C 3G3T: +001 403-398-2482E: [email protected] www.camlockna.com

Inspired Technologies International IncLimegrove Lifestyle CentreSecond Floor, HoletownSt James, Barbados BB24016T: +1 246 622 0173E: [email protected] www.inspiredtechint.com

ADVANCED DYNAMIC OXYGEN MASK

TECHNICAL DATA SHEET

ADOMFC

Doff and Drop Down off Face

Standard Flight (Comfortable Mask Tensioning)

Combat Flight(Additional Mask Tensioning)

Inspiratory/Expiratory Flows l/min

Mas

k Ca

vity

Pre

ssur

es k

Pa

2

1

0

-1

-20 50 100 150 200 250

Issue 2.2 | February 2015

Specification: Standards ASIC – ASMG 4068

MAA - Def Stan 00970 NPA/2012-003

Head Supported Mass 280g (Nominal)

Sizes Two

Temperature Range Operational-40°C (-40°F) to +70°C (+158°F) at 5 - 100% RHNon Operational/Storage-40°C (-40°F) to +90°C (+194°F) at 5 - 100% RH

Helmet Compatibility HGU-55/P, HGU-68/P, HGU-84/P, HGU-56/P, ALPHA 200 Series, ALPHA 300 Series, ALPHA 700 Series and ALPHA 900 Series.

NVG/HMD Compatibility

Pressure Breathing at Altitude (PBA) - 72mm Hg at 60,000ft Pressure Breathing with G (PBG) - 60mm Hg at 9G onset rate 6G.sec-1

Shelf Life Exceeds the requirements of MIL spec 810E

ADOM9G

Mask Cavity Pressure Swings (Typhoon Specification) Main ASP Regulator Safety Pressure at 3mmHg

Product Interfaces: Helmet Attachment Bayonet type or Mask Quick Release (MQR)

Communications 5 ohm, 75 ohm and 150 ohm – Dynamic or Electret

Oxygen Systems On Board Oxygen Generation (OBOGs), Liquid Oxygen (LOX) and Oxygen Bottles.

Mask Cavity Pressure Limits Inspiratory

Mask Cavity Pressure Limits Expiratory

ADOM9G Mask Cavity Pressure Limits Inspiratory

ADOM9G Mask Cavity Pressure Limits Expiratory

A dynamic face seal incorporating a unique bellows system that automatically adjusts under varying mask cavity pressures to guarantee mask seal performance.

Standard Flight

Combat (Additional Mask Tensioning)

Small Bellows

Large Bellows

MASK CAVITY PRESSURE SWINGS (Typhoon specification)Main ASP regulator safety pressure at 3mmHg

Mas

k ca

vity

pre

ssur

es k

Pa

Inspiratory/Expiratory flows l/min

– Mask cavity pressure limits Inspiratory/Expiratory

– ADOM mask cavity pressure performance Inspiratory/ Expiratory

Inspiratory/Expiratory Flows l/min

Mas

k Ca

vity

Pre

ssur

es k

Pa

2

1

0

-1

-20 50 100 150 200 250

Issue 2.2 | February 2015

Specification: Standards ASIC – ASMG 4068

MAA - Def Stan 00970 NPA/2012-003

Head Supported Mass 280g (Nominal)

Sizes Two

Temperature Range Operational-40°C (-40°F) to +70°C (+158°F) at 5 - 100% RHNon Operational/Storage-40°C (-40°F) to +90°C (+194°F) at 5 - 100% RH

Helmet Compatibility HGU-55/P, HGU-68/P, HGU-84/P, HGU-56/P, ALPHA 200 Series, ALPHA 300 Series, ALPHA 700 Series and ALPHA 900 Series.

NVG/HMD Compatibility

Pressure Breathing at Altitude (PBA) - 72mm Hg at 60,000ft Pressure Breathing with G (PBG) - 60mm Hg at 9G onset rate 6G.sec-1

Shelf Life Exceeds the requirements of MIL spec 810E

ADOM9G

Mask Cavity Pressure Swings (Typhoon Specification) Main ASP Regulator Safety Pressure at 3mmHg

Product Interfaces: Helmet Attachment Bayonet type or Mask Quick Release (MQR)

Communications 5 ohm, 75 ohm and 150 ohm – Dynamic or Electret

Oxygen Systems On Board Oxygen Generation (OBOGs), Liquid Oxygen (LOX) and Oxygen Bottles.

Mask Cavity Pressure Limits Inspiratory

Mask Cavity Pressure Limits Expiratory

ADOM9G Mask Cavity Pressure Limits Inspiratory

ADOM9G Mask Cavity Pressure Limits Expiratory

A dynamic face seal incorporating a unique bellows system that automatically adjusts under varying mask cavity pressures to guarantee mask seal performance.

Standard Flight

Combat (Additional Mask Tensioning)

Small Bellows

Large Bellows

Small Bellows

Large Bellows

FLIGHT ADJUSTMENTS

DYNAMIC FACE SEAL

Incorporating a unique bellows system to automatically adjust under varying mask cavity pressure and guarantee mask seal performance