Aduro H1: App connection and basic functionsApp v. 1.45.5 with Firmware 700.1

Open Play Store on Android

(App store on Apple iOS)

Search Aduro H1

Select Aduro Hybrid 1: Moderne Pilleovn

Open Settings Menu on the phone

Open Wi-Fi connection

Connect to RTB-XXXXX/Aduro-XXXXX

If the stove has old firmware, then the WIFI signal name

of the stove is RTB, but once you update the stoves

firmware the name of WIFI signal will permanently

change to Aduro-XXXXX.

Use the standard password

12345678

Aduro-XXXXX does not provide internet access

Some phones might disconnect from Aduro-XXXXX

automatically to search for an active internet

connection.

The phone must stay connected to Aduro-XXXXX for

the first connection to the App.

Now you can open the Hybrid app

The first time you use the stove, you will be asked to give

us permission for using the Hybrid app and cloud

service, otherwise you cant use the app. You need to fill

out the user information. Once this is done you can

select your language.

Connect the mobile/Tablet to the stoveTake a note of the following info:

Password and Serie No. of the stove can be found on the

inner side of the pellet door.

Serie No. 35191

Password: 0000000000

If this is the first time connecting you device to the oven you need three pieces of information.

A. Password and serial number of the oven.

B. The name of your external router.C. The password of this external router

Search oven

0000000000

Serie No. 35191

Password: 0000000000

Setup ConnectionPlease enter the 5-6 digit serial number and 10 digit password provided to connect to your oven

Credentials.

Connection

Result

Continue

Take a note of the following info:

Password and Serie No. of the stove

Search oven

Allow App to access location

Setup ConnectionPlease enter the 5-6 digit serial number and 10 digit password provided to connect to your oven

Credentials.

Connection

Result

Search oven

The app detects if the current firmware needs

to be updated.

The update is automatic and mandatory

Setup ConnectionPlease enter the 5-6 digit serial number and 10 digit password provided to connect to your oven

The stove uses an old firmware. Automatic update starting….

Connection

Result

Credentials.

The update takes up to 4 minutes

Leave the phone close to the stove during the update

*

During the update the lights on the

control panel will light up.

*Check on your phone that the phone is still connected to the stoves

WIFI named RTB-XXXXX or Aduro-XXXXX.

Connection to the Cloud via local Wi-Fi:Now you have connection between the stove and your mobile.

Once the stove has updated, you will be asked to setup WIFI, so the

stove is connected to the house router. You press Setup WIFI (Green

Logo) and the setup will start.

Once this setup is finished you can control the stove - also when

you away from home.

Setup ConnectionPlease enter the 5-6 digit serial number and 10 digit password provided to connect to your oven

Connection

Result

Credentials.

Connection completeConnect to the internet to activate the remoteFunctions.

Search oven

The app will display all available networks that are nearby

Select your house Wi-Fi network. If the app doesn't find it automatically,

then it is because your signal from WIFI router is weak. You have to write

the name of you WIFI manually. A Wifi extender might be needed.

Once you have found the name of your local WIFI network, you also need

to write the Wi-Fi network password. Sometimes It is necessary to do this

multiple times before connection succeeds.

If your house WIFI name has special logo like – or something else, then it

might provide issues and changing house wifi name might solve it. If signal

of WIFI router weak a WIFI extender is needed.

Wi-Fi password

My Wi-FI network

Available network

Connect manually

Connection to the Cloud via local Wi-Fi:

Connection is automatic

This might take up to 3 minutes

Connecting… please wait

Available network

Wi-Fi password

Connection completed!

Now the stove is connected to the Aduro Cloud and

can be controlled remotely with your phone connection.

You can connect up to 4 smartphones to the stove

My Wi-Fi networkNetwork

Available network

Wi-Fi password

Network status Connected to Stoc…

Done

Connecting – please wait…

Search oven

Log into your stove via WIFI router

Once the WIFI connection is completed and Ok you are ready to log

into the stove.

You can log in the stove either by pressing the wheel logo you see

on picture or by pressing top corner ”search stove”

Then you will come to the next page and in the bottom you will see a

logo called ”Wizard”. Press the Wizard logo to log into the stove.

0000000000

Here you insert again the stoves Serie. No. and

password.

Take a note of the following info:

Serie No. 35191

Password: 0000000000

0000000000

Setup ConnectionPlease enter the 5-6 digit serial number and 10 digit password provided to connect to your oven

Credentials.

Continue

Search oven

Connection

Result

0000000000

Connect the App to the stove via 3G/4G:

Once the Serie No. and password are inserted, you can

click on the green button “using existing WIFI settings”

You have now connected the stove to the house router

and to the cloud. Your stove is now ready for use.

Use Existing WIFI settings

Available network

Connection

Result

Connection

Result

Credentials.

Connection complete

Use current settings

Setup ConnectionPlease enter the 5-6 digit serial number and 10 digit password provided to connect to your oven