Embed Size (px)
Citation preview
Adrian A.I. Gregory3045 Walnut Bend lane #37 Houston Texas 77042 / 361-489-5311 / [email protected]
Mechanical EngineerPROFESSIONAL STRENGHTS.
1
• In-depth knowledge of mechanical design, Heat Transfer and manufacturing processes.• Knowledge of Control systems, Dynamic systems, and Kinematic Analysis.• High energy and ability to meet deadlines.• Strong communication, presentation and organizational skills.• Knowledgeable in fluid mechanics, machine elements, mechanical vibration analysis and
thermodynamics.
2
EDUCATION.• BSME. Mechanical Engineering (GPA 3.3) - Texas A&M University (Kingsville, TX), 12/2014.• Certificate in Welding - Houston Community College (Houston, TX), 05/2016.• Certified Welder (Groove Welding) – State Cert. No. – AG7051- American Welding Society, 05/2016.
PROJECTS and DESIGNS (Summary).Portable Plastic Pellet Machine (Senior Design Project) – The Concept of the project was to provide a simple easy to use space saving devise to improve storage of plastic bags typically accumulated from household shopping. The objective was to encourage recycling of hard to dispose non biodegradable plastic waste. This was achieved by designing and building a device that compressed shopping bags into pellets, which would make it easy to store greater volume for recycling without the need to have more storage. Several analyses were performed, which involved the use of design software such as solid-works, mathematical principles, heat transfer analysis, vibration analysis, electrical principles and application in setting up the controls systems. Vibration analysis on thorax during CPR – This project analyzed the effect of forces on the thorax during CPR on a person of any age group. Mat-Lab coding was used as the analytical software to represent the forces.Kinematic analysis on robotic arm - This project analyzed the kinematic movement of a robotic arm when picking up a hockey puck. Using equations of motion for the robotic arm, the movement when picking up a puck was evaluated to fine tune this operation. Solid Works, software was one of the primary analytical tools used in the motion analysis the robotic arm.TECHNICAL SKILLS:
• Programming Language - Visual Basic, Mat-Lab Programming.• Technical Skills - CNC Machining, AutoCAD, Solid Works, Autodesk Inventor, ANSYS, MS
Project, Microsoft Suite (Excel, Word, Publisher, Power point, Outlook).EXPERIENCEEngineering Intern - 06/2014 – 08/2014.Compressor Engineering Corporation/ (CECO Pipeline Services) - Houston Texas.
• Assisted in design of compressor valves, for compressors using Microsoft Inventor.• Maintained Mechanical Electrical and Plumbing (MEPs) as-built drawings for several projects. • Drafting of Mechanical parts (Valves and Actuators) and performed flow rate calculations. • Performed Spring Design Calculations utilizing Visual Basic software and programming skills.• Performed drawing inventory reconciliation in electronic system database.
Volunteer - Mentor/Tutor - PresentlyMemorial High School - Houston Texas.
• Support Junior and senior high school students on college application and preparation.• Assist’s students on how to interpret information to solve problems. • Guide’s students on balancing school, family and extracurricular activities
REFERENCES
Justin Russell Title: Engineering Supervisor Company: Compressor Engineering CorporationPhone: 713-664-7333
Mark WallPosition: Planner/EstimatorCompany: Aluminum Companies of America (ALCOA)Phone: 361-935-7572
3
Roy BerglundTitle: Construction ManagerCompany: Areas USAPhone#: 305-978-3745
Wayne PillinerTitle: Maintenance ManagerCompany: MosaicPhone#: 863-559-2733
Derick HallTitle: Powerhouse Consultant Company: Almatis BurnsidePhone#: 361-935-0611
4
