Upload
truongthuy
View
215
Download
0
Embed Size (px)
Citation preview
ADEOTM
®
Project Details:Adeo 2x2 with Satine Lens35K, 3,759 lumens 35 average footcandles.44 w/sq. ft.
© Raul J. Garcia, Denver, CO
Pinnacle Architectural Lighting’s Adeo creates a soft, natural light while providing efficacies over 100 lumens per watt with LED and over 90% efficient in fluorescent. The unique one-piece, co-extruded lens evenly illuminates the center while minimiz-ing lamp imaging. The lens’ ribbed sides project light across the curved surface of the fixture creating the appearance of a ful-ly luminous fixture. The fully enclosed lens assembly swings open and remains captive during routine maintenance.
Project Details:Adeo 2x4 with Satine Lens(2) 32W T832 average footcandles.62 w/sq.ft
© Raul J. Garcia, Denver, CO
ww
w.p
inna
cle-
ltg.c
om
Adeo’s exclusive enclosed lens remains attached to the fixture. No more lost pieces or hardware during routine fixture maintenance.
Captive Enclosed Lens
QuickShipSustainable
Adeo has over 25 configurations with 90% plus efficiencies and over 100 lumens per watt with LED allowing for power densities as low as 0.50 w/sq. ft. making it an ideal solution for LEED or Rebate Qualified projects.
High Performance Luminaire
Clean, Uniform AestheticAdeo’s one-piece, co-extruded satine lens creates a soft glow down the center of the fixture while the ribbed side projects light to the side panels for a fully luminous look.
Shielding and Lamping OptionsAdeo offers multiple lamping and shielding options. Choose from LED, T5, T5HO, T8 or Biax and pair it with one of Adeo’s 4 distinct appearances. Select from the standard satine lens, internal baffle, round perf or linear slot. (Baffle not available with LED)
Satine Lens (A) Round Perf (R)
Linear Slot (L) Baffle (B)
QuickShipSustainable
Fast track projects are becoming more of the norm rather than the exception. Both Adeo and Adeo Shallow can ship in 10 days or less.
10 Day Quick Ship
Pinnacle Architectural Lighting is committed to being a good stew-ard to our environment. Adeo is manufactured using partially recycled content and utilizes 30% less material than your average 20 gauge troffer.
30% less Material With heights as low as 2-1/4”, Adeo T5 and Adeo Shallow are the
perfect solution for projects with limited plenum space. A mere 4” is all that is required for installation.
Ideal for Shallow Plenum Installations
4-3/8”
Adeo LED & T8 (AD)
3”
Adeo T5 (AD)
2-1/4”
Adeo Shallow (AS)
ADEO LED: Introducing Adeo LED, Pinnacle Lighting’s next generation to the Adeo family. Adeo LED offers over 100 lumens per watt in 4 different color temperatures. Available in the standard satine lens or with aesthetic lens options for a unique design element.
Adeo LED Adeo T8 Adeo T5
4-9/16”
12”
12"
Side View
2”4-9/16”
Adeo 1x1 (AD11)
24"
4-3/8”
24"
Side View
2”4-3/8”
Adeo 2x2 (AD22)
48"
Side View
2”4-3/8”
24"
4-3/8”
Adeo 2x4 (AD24)
24"
4-3/8”
24"
Side View
2”4-3/8”
Adeo 2x2 (AD22)
48"
Side View
2”4-3/8”
24"
4-3/8”
Adeo 2x4 (AD24)
24"
Side View
3”
Adeo 2x2 (AD22)
48"
Side View
3”
Adeo 2x4 (AD24)
Adeo 1x4 (AD14)
Adeo Shallow
Adeo Shallow 2x2 (AS22)
Adeo Shallow 2x4 (AS24)
Adeo Shallow 1x4 (AS14)
24"
3”
24"
3”
12"
3”
Side View
24"
Side View
48"
24"
2-1/4”
2-1/4”
2-1/4”
2-1/4”
24"
2-1/4”
12"
2-1/4”
Side View
48"48"
Side View
3”
12"
4-3/8”
Adeo 1x4 (AD14)
48"
Side View
2”4-3/8”
12"
4-3/8”
Adeo 1x4 (AD14)
48"
Side View
2”4-3/8”
ww
w.p
inna
cle-
ltg.c
om
ADEO T5:
Surface Mount
Adeo’s surface mount allows for design consistency in spaces where recessed lighting is not an option. The 20 gauge steel frame creates a dramatic look without sacrificing performance. The frame easily secures to the ceiling. Surface mount is available on all Adeo sizes and all lamping options. (Not available on Adeo shallow)
Adeo T5 provides flexible lamping options, a 3” fixture heightfor shallow plenum spaces, aesthetic lens options and a baffle.
1 T5 / T5HO 2 T5 / T5HO 3 T5 / T5HO
1 T5 / T5HO 2 T5 / T5HO 3 T5 / T5HO
1 T5 / T5HO 2 T5 / T5HO
Adeo LED Adeo T8 Adeo T5
4-9/16”
12”
12"
Side View
2”4-9/16”
Adeo 1x1 (AD11)
24"
4-3/8”
24"
Side View
2”4-3/8”
Adeo 2x2 (AD22)
48"
Side View
2”4-3/8”
24"
4-3/8”
Adeo 2x4 (AD24)
24"
4-3/8”
24"
Side View
2”4-3/8”
Adeo 2x2 (AD22)
48"
Side View
2”4-3/8”
24"
4-3/8”
Adeo 2x4 (AD24)
24"
Side View
3”
Adeo 2x2 (AD22)
48"
Side View
3”
Adeo 2x4 (AD24)
Adeo 1x4 (AD14)
Adeo Shallow
Adeo Shallow 2x2 (AS22)
Adeo Shallow 2x4 (AS24)
Adeo Shallow 1x4 (AS14)
24"
3”
24"
3”
12"
3”
Side View
24"
Side View
48"
24"
2-1/4”
2-1/4”
2-1/4”
2-1/4”
24"
2-1/4”
12"
2-1/4”
Side View
48"48"
Side View
3”
12"
4-3/8”
Adeo 1x4 (AD14)
48"
Side View
2”4-3/8”
12"
4-3/8”
Adeo 1x4 (AD14)
48"
Side View
2”4-3/8”
ADEO T8: Pinnacle Lighting recognizes the requirement for T8 lamping for specific applications. Adeo T8 offers 1, 2, and 3 lamp options for 2x2 and 2x4 plus 1 and 2 lamp options in the 1x4.
Adeo LED Adeo T8 Adeo T5
4-9/16”
12”
12"
Side View
2”4-9/16”
Adeo 1x1 (AD11)
24"
4-3/8”
24"
Side View
2”4-3/8”
Adeo 2x2 (AD22)
48"
Side View
2”4-3/8”
24"
4-3/8”
Adeo 2x4 (AD24)
24"
4-3/8”
24"
Side View
2”4-3/8”
Adeo 2x2 (AD22)
48"
Side View
2”4-3/8”
24"
4-3/8”
Adeo 2x4 (AD24)
24"
Side View
3”
Adeo 2x2 (AD22)
48"
Side View
3”
Adeo 2x4 (AD24)
Adeo 1x4 (AD14)
Adeo Shallow
Adeo Shallow 2x2 (AS22)
Adeo Shallow 2x4 (AS24)
Adeo Shallow 1x4 (AS14)
24"
3”
24"
3”
12"
3”
Side View
24"
Side View
48"
24"
2-1/4”
2-1/4”
2-1/4”
2-1/4”
24"
2-1/4”
12"
2-1/4”
Side View
48"48"
Side View
3”
12"
4-3/8”
Adeo 1x4 (AD14)
48"
Side View
2”4-3/8”
12"
4-3/8”
Adeo 1x4 (AD14)
48"
Side View
2”4-3/8”
1, 2 Biax 1, 2, 3 T8
1 T8 2T8 3T8
1 T8 2T8
ww
w.p
inna
cle-
ltg.c
om
ADEO SHALLOW:At a depth of 2-1/4”, Adeo Shallow is the ideal lighting solution for projects with low plenum restrictions. Available in 2 lamp T5 with all three housing sizes.
Adeo LED Adeo T8 Adeo T5
4-9/16”
12”
12"
Side View
2”4-9/16”
Adeo 1x1 (AD11)
24"
4-3/8”
24"
Side View
2”4-3/8”
Adeo 2x2 (AD22)
48"
Side View
2”4-3/8”
24"
4-3/8”
Adeo 2x4 (AD24)
24"
4-3/8”
24"
Side View
2”4-3/8”
Adeo 2x2 (AD22)
48"
Side View
2”4-3/8”
24"
4-3/8”
Adeo 2x4 (AD24)
24"
Side View
3”
Adeo 2x2 (AD22)
48"
Side View
3”
Adeo 2x4 (AD24)
Adeo 1x4 (AD14)
Adeo Shallow
Adeo Shallow 2x2 (AS22)
Adeo Shallow 2x4 (AS24)
Adeo Shallow 1x4 (AS14)
24"
3”
24"
3”
12"
3”
Side View
24"
Side View
48"
24"
2-1/4”
2-1/4”
2-1/4”
2-1/4”
24"
2-1/4”
12"
2-1/4”
Side View
48"48"
Side View
3”
12"
4-3/8”
Adeo 1x4 (AD14)
48"
Side View
2”4-3/8”
12"
4-3/8”
Adeo 1x4 (AD14)
48"
Side View
2”4-3/8”
Antimicrobial Paint (AM)
Antimicrobial paint finish is available on both Adeo and Adeo Shallow. An antimicrobial additive is added into the powder coating that suppresses the growth and spread of microorganisms such as bacteria and mold. Choose the antimicrobial option for healthcare projects where clean environments are a necessity.
Air Return is an alternative method for allowing air to access the plenum. Optional Air Return blends into ceiling grid with minimal slot visibility.
Air Return (AR)
MOUNTING DETAILAdeo installs seamlessly into any standard grid ceiling system. The flexible mounting system allows customers to select based on the fixture installed either flush with or above the ceiling tile.
G1 (1”Ceiling Grid) Mounting Options G9 (9/16”Ceiling Grid) Mounting Options GS (Screw Slot Grid) Mounting Options
1” Ceiling Grid with Standard Tile
1” Ceiling Grid with Tegular Tile
9/16” Ceiling Grid with Standard Tile
9/16” Ceiling Grid with Tegular Tile
Screw Slot Ceiling Grid 9/16” Ceiling Grid with Tegular Tile (fixture flush with tile)
OPTIONS
Project Details:Adeo 2x2 with Satine Lens
40K, 3,490 lumens35 average footcandles
.55 w/sq.ft
© Raul J. Garcia, Denver, CO
© Michael Robinson Photography
ww
w.p
inna
cle-
ltg.c
om
DAYLIGHT HARVESTING Today’s building environments require thoughtful choices from planning through final integration. Taking advantage of daylight harvesting potential to save energy and create smarter, more responsible environments is easily achieved through the use of the integrated daylight sensor option for Adeo.
In addition to inherent green benefits, the integrated daylight sensor is a turnkey solution with no extra control wires to the fixture. Easily specified with fixtures and by simply following the recommended best practices in regards to placement of the daylight sensor, you can add daylight harvesting to your project’s list of energy saving green potential.
Energy SavingsHelp reduce overall energy usage on a project and contribute to the sustainability of the building with easily achieved energy savings. Depending on location and season, savings can be as significant as 15-45% annually.
Sensor SetupNo additional commissioning is required. To adjust light levels in spaces that require more or less light, simply rotate the sensor aperture in the fixture.
Technical- Controls up to 20 dimming ballasts/ drivers- +1.5v to +10.5v input control to ballast/ driver- Sensor adjustable from 1/3 to 3x light output
Technical
- Controls up to 20 dimming ballasts- +1.5v to +10.5v input control to ballast- Sensor adjustable from 1/3 to 3x light output
Sensor SetupNo additional commissioning is required. To adjust light levels in spaces that require more or less fluorescent light, simply rotate the sensor aperture in the fixture.
Rotate the aperturecounter clockwisefor more fixture light
Default factory preset for 45fc at
work surface
Rotate the aperture clockwise for
less fixture light-+
- Controls up to 20 dimming ballasts- +1.5v to +10.5v input control to ballast- Sensor adjustable from 1/3 to 3x light output
Integrated Daylight Sensor (DSM and DSS)
D a y l i g h t H a r v e s t i n g
Today's building environments require thoughtful choices from planning through final integration. Taking advantage of daylight harvesting potential to save energy and create smarter, more responsible environments is easily achieved through use of the integrated daylight sensor option for Adeo.
Sensor Setup
No additional commissioning is required. To adjust light levels in spaces that require more or less fluorescent light, simply rotate the sensor aperture in the fixture.
Rotate the aperturecounter clockwise
for more fixture light
Default factory preset for 45fc at work surface
Rotate the aperture clockwise for
less fixture light-+
Design Placement
While the daylight sensor is flexible and easy to specify, key guidelines for sensor placement within your project or space should be followed to maximize daylight harvesting potential.
Energy Savings
Help reduce overall energy usage on a project and contribute to the sustainability of the building with easily achieved energy savings. Depending on location and season, savings can be as significant as 15-45% annually.
As daylight increases, the Daylight Sensor will compensate for 50% or more of additional contribution as shown above.
Energy Savings
Excess Light without SensorTotal Light with Sensor
Daylight Contribution
Fixture Contribution0fc
45fc
5
2
13
4
Sensor should be within 6'-10' from windowsTypical daylighting zone from windows is 15'Sensors should not be placed within 5' of each otherSensor should be placed over typical work areaRecommended mounting height for sensor is 8'-10'
1 2 3 4 5
Follow these guidelines for optimal results:
In addition to inherent green benefits, the integrated daylight sensor is a turnkey solution with no extra control wires to the fixture. Easily specified with fixtures and by simply following the recommended best practices in regards to placement of the daylight sensor, you can add daylight harvesting to your project's list of energy saving green potential.
Typical Sensor placement
Satellite Fixture connection
Technical
Design PlacementWhile the daylight sensor is flexible and easy to specify, some guidelines for sensor placement within your project or space should be followed tomaximize daylight harvesting potential.
1402
1052
701
351
579
868
1157
289
930
698466
233
4042 Efficacy: 89 LPW
1379
1034689
345
(2) T5 Efficiency: 92%
708
531354
177
4035Efficacy: 94 LPW
(2) T5HO Efficiency: 92%
(1) T5 Efficiency: 92%
APPLICATION GUIDELINESAdeo 2x2 Guidelines
Adeo 2x4 Guidelines
Adeo 1x4 Guidelines
30’ x 30’x 9’ Room
Source:
Shielding:
Work Area:
Spacing:
40K, 3,490 lumens
Satine Lens
20’ x 20’
8’ x 8’
Light Level (fc):Maximum: Minimum: Power Density (W/sq.ft.):
37.7 fc45.0 fc33.0 fc0.497
80/50/20 reflectance Light Loss Factor .85
10’ x 12’x 9’ Room
Lamp:
Shielding:
Work Area:
Spacing:
(2) T5HO
Satine Lens
Full Room
6’ oc
Light Level (fc):Maximum: Minimum: Power Density (W/sq.ft.):
29.9 fc38.0 fc22.0 fc0.86
80/50/20 reflectance Light Loss Factor .85
50’ x 50’x 9’ Room
Source:
Shielding:
Work Area:
Spacing:
40K, 4,270 lumens
Satine Lens
30’ x 30’
10’ x 12’
Light Level (fc):Maximum: Minimum: Power Density (W/sq.ft.):
31.87 fc44.0 fc26.0 fc0.384
80/50/20 reflectance Light Loss Factor .85
50’ x 50’x 9’ Room
Lamp:
Shielding:
Work Area:
Spacing:
(2) T5
Satine Lens
30’ x 30’
10’ x 12’
Light Level (fc): Maximum: Minimum: Power Density (W/sq.ft.):
39.7 fc51.0 fc33.0 fc0.49
80/50/20 reflectance Light Loss Factor .75
6’ x 50’x 9’ Room
Lamp:
Shielding:
Work Area:
Spacing:
(1) T5
Satine Lens
6’ x 45’
10’ oc
Light Level (fc): Maximum: Minimum: Power Density (W/sq. ft):
15.4 fc18.0 fc12.0 fc0.53
80/50/20 reflectance Light Loss Factor .85
ww
w.p
inna
cle-
ltg.c
om
ADEO - LED, T5, T8
HOUSING1
Adeo 1x1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AD11 Adeo 2x2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AD22 Adeo 2x4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AD24 Adeo 1x4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AD14
SHIELDING1
Satine Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A Round Perf Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R Linear Slot Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L Baffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B Satine Lens with Baffle . . . . . . . . . . . . . . . . . . . . . . . . . BF
SOURCE1
LED1
27K, packages from 1000 to 6900 lumens . . . . . . . . 27__ 30K, packages from 1000 to 6900 lumens . . . . . . . . 30__ 35K, packages from 1000 to 6900 lumens . . . . . . . . 35__ 40K, packages from 1000 to 6900 lumens . . . . . . . . 40__
Biax (Adeo 2x2) (1) 25W Biax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1BX25 (2) 25W Biax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2BX25 (1) 40W Biax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1BX40 (2) 40W Biax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2BX40 (1) 55W Biax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1BX55
Fluorescent (1) T5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1T5 (2) T5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2T5 (3) T5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3T5 (1) T5HO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1T5HO (2) T5HO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2T5HO (3) T5HO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3T5HO (1) T8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1T8 (2) T8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2T8 (3) T8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3T8
MOUNTING1
Recessed 1” T-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G1 9/16” T-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G9 Slotted T-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GS Flanged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FL Surface Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S
VOLTAGE1
120 volt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 277 volt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 347 volt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347 Universal Voltage (120-277) . . . . . . . . . . . . . . . . . . . . .UNV
CIRCUITING1
Single Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1C Dual Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2C Single Circuit Dimming . . . . . . . . . . . . . . . . . . . . . . . . . 1D Dual Circuit Dimming . . . . . . . . . . . . . . . . . . . . . . . . . . 2D Single Circuit with Battery Pack . . . . . . . . . . . . . . . . . . 1B Dual Circuit with Battery Pack . . . . . . . . . . . . . . . . . . . 2B Single Circuit with Emergency Circuit . . . . . . . . . . . . . 1E Dual Circuit with Emergency Circuit . . . . . . . . . . . . . . . 2E
FINISH1
Matte White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W
OPTIONS1
Quick Ship . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QS Through-Wired . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TW Step Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SW Integral Daylight Sensor Master . . . . . . . . . . . . . . . . DSM Integral Daylight Sensor Satellite . . . . . . . . . . . . . . . . DSS Internal Fast-Blow Fuse . . . . . . . . . . . . . . . . . . . . . . . . GLR Air Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AR Chicago Plenum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CP 6’ 18-gauge Flex Whip . . . . . . . . . . . . . . . . . . . . . . . .FW6 12’ 18-gauge Flex Whip . . . . . . . . . . . . . . . . . . . . . . .FW12 Antimicrobial Paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . AM
ADEO - Shallow
HOUSING1
Adeo Shallow 2x2 . . . . . . . . . . . . . . . . . . . . . . . . . . . AS22 Adeo Shallow 2x2 . . . . . . . . . . . . . . . . . . . . . . . . . . . AS24 Adeo Shallow 1x4 . . . . . . . . . . . . . . . . . . . . . . . . . . . AS14
SHIELDING1
Satine Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A Round Perf Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R Linear Slot Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L Baffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B Satine Lens with Baffle . . . . . . . . . . . . . . . . . . . . . . . . . BF
SOURCE1
Fluorescent (2) T5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2T5
MOUNTING1
Recessed 1” T-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G1 9/16” T-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G9 Slotted T-Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GS Flanged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FL
VOLTAGE1
120 volt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 277 volt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 347 volt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347 Universal Voltage (120-277) . . . . . . . . . . . . . . . . . . . . .UNV
CIRCUITING1
Single Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1C Dual Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2C Single Circuit Dimming . . . . . . . . . . . . . . . . . . . . . . . . . 1D Dual Circuit Dimming . . . . . . . . . . . . . . . . . . . . . . . . . . 2D Single Circuit with Battery Pack . . . . . . . . . . . . . . . . . . 1B Single Circuit with Emergency Circuit . . . . . . . . . . . . . 1E
FINISH1
Matte White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W
OPTIONS1
Quick Ship . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QS Through-Wired . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TW Step Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SW Integral Daylight Sensor Master . . . . . . . . . . . . . . . . DSM Integral Daylight Sensor Satellite . . . . . . . . . . . . . . . . DSS Internal Fast-Blow Fuse . . . . . . . . . . . . . . . . . . . . . . . . GLR Air Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AR Chicago Plenum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CP 6’ 18-gauge Flex Whip . . . . . . . . . . . . . . . . . . . . . . . .FW6 12’ 18-gauge Flex Whip . . . . . . . . . . . . . . . . . . . . . . .FW12 Antimicrobial Paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . AM
1Not all options are available for all product configurations. Refer to specification sheets for complete product offering and specific lumen packages. Specifications and dimensions subject to change without notice. Specification sheets and brochures that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
LUMINAIRE SPECIFICATION
12655 East 42nd Avenue Suite 50Denver CO, 80239
Phone: 303.322.5570Fax: 303.322.5568
www.pinnacle-ltg.com
January 2015© 2015 Pinnacle Architectural Lighting®
®