Upload
vanxuyen
View
246
Download
3
Embed Size (px)
Citation preview
Address | 50-13, Jayeo-ro, Uichang-gu, Changwon-si, Gyeongsangnam-do, Korea
TEL | +82-55-299-9661 FAX | +82-55-299-9665 HOMEPAGE | www.keumwooeng.com
Published by KEUMWOOENG, October 30, 2015
KEUMWOOENG Quality is Our Future. Our Future is the World.
The Best Quality to Raise the Status of KoreaWith the goal of becoming a company specialized in the manufacture of refrigerator parts, KEUMWOOENG does its best to raise the status of products ‘MADE IN KOREA’ in the global market.
CONTENTS
About KEUMWOOENG 4KEUMWOOENG’s Message & HistoryProduction Process & Business Areas
PRODUCT 8SCREW Parts
RECIPROCATING Parts
The Growth of KEUMWOOENG : Company History
2000
| July 15 Founded as TEMS Industrial at Changwon Machinery Zone
| Start of development for MYCOM type screw compressor parts
| Development and delivery of marine air compressor parts
2004
| April 1 Name changed to Geobong Tech
| Development and delivery of HOWDEN type screw compressor parts
| Development and delivery of marine start air compressor parts
| Export begins for certain refrigerator parts through trade agent
| October 1 - Business location moved to Masan-ri, Buk- myeon, Changwon-si
| Development and sales of all MYCOM type multi-cylinder refrigerator parts
KEUMWOOENG's MESSAGE
4 KEUMWOOENG
2009
| Business location moved to Wolchon-ri, Buk-myeon, Changwon-si
| Development and sales of all HASEGAWA type multi-cylinder refrigerator parts
2013
| April 20 Company name changed to KEUMWOOENG
| August 14 Obtained venture company certification
| October 1 Business location moved to Songjeong-ri, Uichang-gu, Changwon-si
2015
| Developing DAIKIN type multi-cylinder refrigerator parts
| Developing SABORE type multi-cylinder refrigerator parts
QUALITY IS OUR FUTURE OUR FUTURE IS THE WORLD
As a company specializing in the manufacture of refrigerator parts founded in 2000,
we have developed and branded MYCOM, HOWDEN type industrial screw refrigerator
repair parts and MYCOM, HASEGAWA type reciprocating multi-cylinder refrigerator
repair parts under the slogan: “Quality is Our Future; Our Future is the World.”
In the past, most industrial refrigerator parts have been imported and markets were
created based upon imported products. Due to our pioneering domestic manufacture
of refrigerator parts, we are not only conducting sales within the domestic market but
expanding our sales network to export markets.
We are in the process of developing and producing SABORE, DAIKIN, BITZER, GRASSO,
VILTER refrigerator repair parts through systematic and careful planning with a priority
in quality in order to enter into foreign markets and to proactively respond to the rapidly
changing markets both at home and abroad.
With the goal of becoming a company specialized in the manufacture of refrigerator
parts, we will do our best to raise the status of products ‘MADE IN KOREA’ in the global
market. We would like to express our gratitude to our customers who have given us
their undivided support and we wish the best of luck to everyone.
5MESSAGE & history
6 KEUMWOOENG
PRODUCTION Process
BUSINESS Areas
PRODUCT FORM MODEL
MYCOM TYPE SCREW COMPRESSOR PARTS 125 S/L ~ 400 S/L
HOWDEN TYPE SCREW COMPRESSOR PARTS WRV 163 ~ WRV 321
MYCOM TYPE RECIPROCATING COMPRESSOR PARTS
All parts for A-type and B-type models (excluding case)
All parts for 4WA ~ 62WB models (excluding case)
SF 62 ~ SFW 62
HASEGAWA TYPE RECIPROCATING COMPRESSOR PARTS
All parts for VM 3 ~ VZ 8 (excluding case)
DAKIN MARINE TYPE 2C ~ 6C
SABROE TYPE PISTON COMPRESSOR PARTS SMC 104 ~ TSMC 108
MARINE AIR COMPRESSOR PARTS
Production and delivery of refrigerator parts requested by other customers
Selection of Item to be Developed
Design and Material Analysis- Request testing to state certified institution
Creation of Blueprint
Production of Die for Material
Production of Material- Material inspection
- Organization picture
- Hardness and tensile strength
*Request testing to state certified institution
0302 04 0501
7PROCESS & BUSINESS AREAs
Processing- CNC turning center
- Machining center
- Precision Grinding
- Honing
- Lapping
Inspection- Measurement inspection
- Assembly inspection
Post-processing Cleaning and Packaging
Delivery
06 0807 09 10
SALES
Stores of Domestic Industrial Refrigerator Parts
As of May 31, 2015Sold at about 30 local sales agencies
Stores of Export Industrial Refrigerator Parts
Currently conducting business with 5 trade agents as of May 31, 2015
- Exporting to the Southeast Asia- Exporting to Europe- Exporting to North and South America
Quality is not made by chance but is always the result of intelligent effort.
Product Introduction:SCREW
All sorts of GASKET SETS and O-RING SETS for Single/Two Stage MYCOM type screw compressors
All sorts of MAIN and SIDE BEARING for MYCOM type screw compressors
1. SCREW COMPRESSOR GASKET & O-RING
2. SCREW COMPRESSOR MYCOM TYPE MAIN & SIDE BEARING
∷ GASKET SET
A.SINGLE STAGE
125S/L ~320S/L (Including V-type)
B.TWO STAGE
1610C~3225C
∷ O-RING SET
C.SINGLE STAGE
125S/L ~320S/L (Including V-type)
D.TWO STAGE
1610C~3225C
A.125S/L MAIN & SIDE BEARING
B.160S/L MAIN & SIDE BEARING
C.200S/L MAIN & SIDE BEARING
D.250S/L MAIN & SIDE BEARING
E.320S/L MAIN & SIDE BEARING Make to Order
F.400S/L MAIN & SIDE BEARING Make to Order
10 KEUMWOOENG
Product_SCREW PARTS
3. SCREW COMPRESSOR MYCOM TYPE new and Old type MECHNICAL SEAL ASSEMBLY
4. SCREW COMPRESSOR MYCOM TYPE BALANCE PISTON & SLEEVE
A. MECH’ ASS’Y 125S/L ~ 200S/L (Including BOS TYPE)
B. SEAL RING 125S/L ~ 200S/L (Including BOS TYPE)
C. CARBON INSERT 125S/L ~ 200S/L
D. O1L SEAL 125S/L ~ 200S/L
E. OIL PUMP MECH’ ASS’Y M50P ~ M100P
A. BALANCE PISTONSINGLE STAGE : 125S/L ~ 320S/L
TWO STAGE : 1610C ~ 3225C
B. BALANCE PISTON SLEEVESINGLE STAGE : 125S/L ~ 320S/L
TWO STAGE : 1610C ~ 3225C
11PRODUCT_SCREW parts
6. SCREW COMPRESSOR OIL PUMP METAL BEARING
5. SCREW COMPRESSOR HOWDEN TYPE INLET &OUTLET BEARING
A. INLET & OUTLET JOURNAL BEARINGWRV 163~255
WRV 321 - Make to Order
M50P ~M100P METAL BEARING
12 KEUMWOOENG
Product_SCREW PARTS
13KEUMWOOENG
Product Introduction:RECIPROCATING
1. RECIPROCATING COMPRESSOR CRANK SHAFT ASSEMBLE
A. MYCOM TYPE CRANK SHAFT ASSEMBLE
4A, 6A, 8A TYPE & 4B, 6B, 8B, SF TYPE
B. HASEGAWA TYPE CRANK SHAFT ASSEMBLE
VZ CRANK SHAFT ASSEMBLE
VM CRANK SHAFT ASSEMBLE
Make to Order
14 KEUMWOOENG
Products_Reciprocating Parts
2. RECIPROCATING COMPRESSOR BEARING
3. RECIPROCATING COMPRESSOR MECHNICAL SEAL PART
A. MYCOM TYPE MAIN & THRUST BEARING
A TYPE , B TYPE, SF TYPE, SFX
TYPE, WBH TYPE
B. HASEGAWA TYPE REAR & FRONT BEARING
VM TYPE , VZ TYPE
A. MYCOM TYPE MECHNICAL SEAL ASSEMBLE
A TYPE , B TYPE, SF TYPE,
WBH TYPE
B. HASEGAWA TYPE MECHNICAL SEAL ASSEMBLE
VM TYPE , VZ TYPE
15PRODUCT_Reciprocating Parts
4. RECIPROCATING COMPRESSOR MYCOM & HASEGAWA TYPE
5.RECIPROCATING COMPRESSOR MYCOM & HASEGAWA TYPE PISTON outer PART
A. MYCOM TYPE CYLINDER SLEEVEA. TYPE, B TYPE, SF TYPE, SFX TYPE
B. HASEGAWA TYPE CYLINDER LINER VM TYPE, VM L TYPE, VZ TYPE,
VZ L TYPE
A. MYCOM TYPE PISTON A TYPE , B TYPE, SF TYPE
B. HASEGAWA TYPE PISTON VM TYPE, VZ TYPE
C. PISTON RING SETMYCOM TYPE - A TYPE , B TYPE
HASEGAWA TYPE — VM TYPE, VZ TYPE
D. PISTON PINMYCOM TYPE — A TYPE , B TYPE
HASEGAWA TYPE — VM TYPE, VZ TYPE
16 KEUMWOOENG
Products_Reciprocating Parts
6. RECIPROCATING COMPRESSOR MYCOM & HASEGAWA TYPE VALVE & PLATE
7.RECIPROCATING COMPRESSOR CONNECTING ROD ASSEMBLE
A. MYCOM TYPE CONNECTING ROD ASSEMBLEA TYPE , B TYPE
B. HASEGAWA TYPE CONNECTING ROD ASSEMBLEVM TYPE, VZ TYPE
A. MYCOM TYPE VALVE PLATEA, B TYPE WA,WB TYPE
B. MYCOM TYPE SUCTION VALVEA, B TYPE WA, WB TYPE
C. HASEGAWA TYPE OUTER 및 INNER SEARVM TYPE, VZ TYPE
17PRODUCT_Reciprocating Parts
8.RECIPROCATING COMPRESSOR DICHARGE VALVE ASSEMBLE
9.RECIPROCATING COMPRESSOR UNLOAD
A. MYCOM TYPE DICHARGE VALVE CAGE ASSEMBLE A,B TYPE WA,WB TYPE SF,SFX TYPE
B. HASEGAWA TYPE DICHARGE VALVE ASSEMBLEVM TYPE, VZ TYPE
A. MYCOM TYPE UNLOAD PISTON A TYPE, B TYPE
B. HASEGAWA TYPE UNLOAD CYLINDER ASSEMBLE(common)
18 KEUMWOOENG
Products_Reciprocating Parts
19PRODUCT_RECIPRO & DEVELOPMENT PLAN
Development Plans of KEUMWOOENG
Type | DAIKIN
Model | 2C582SE-F SERIES
2C582LE-CF SERIES
4~6C552A-F SERIES
Expected Duration of Development |
2015. 11 ~ 2016. 3
Type | SABROE
Model | SMC104~108 SERIES
Expected Duration of Development |
2015. 7 ~ 2016. 2
Type | VILTER
Model | VMC 440, VMC 450,
VMC 450XL SERIES
Expected Duration of Development |
2016. 1 ~ 2016. 9
Type | BITZER
Model | 4V.4P,4H,4G,6G SERIES
Expected Duration of Development |
2015. 9 ~ 2016. 3
Type | GRASSO
Model | RC9, RC11 SERIES
Expected Duration of Development |
2016. 4 ~ 2016. 12
Type | BOCK
Model | FK 40 / 650 SERIES
Expected Duration of Development |
2016. 9 ~ 2017. 3