Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
SERVICECAPABILITIES
CALIBRATION
00.0
COMMISSIONINGTESTING MAINTENANCEINSTALLATIONDESIGN SWITCHING & MANUFACTURING
OVERVIEWADDELEC POWER SERVICES PRIDES ITSELF ON PROVIDING A FULL-SERVICE SOLUTION FOR ALL YOUR INDUSTRIAL ELECTRICAL NEEDS.
Addelec was founded in 2006. In 2019 the company was acquired by Australian owned IPD Group, joining previously acquired companies Hivotech, Central Test and Zinfra HV Test.
The result being a highly qualified team operating nationally with dedicated branches in New South Wales, Victoria and Tasmania.
Services include high and low voltage electrical works, associated civils, level 3 design, installation, maintenance, commissioning, testing, equipment repairs and NATA accredited calibrations.
Addelec operates by working collaboratively with the customer, bringing experience and expertise to any project including design recommendations, project management and final commissioning compliance reports.
Addelec will help to optimise the value within your project scope whilst mitigating risk.
DATA CENTERS EDUCATION INDUSTRIAL SITES SUBSTATIONS MINES/POWER STATIONSTRANSPORTATION UTILITIES
ACCREDITATIONSAddelec is authorised and accredited in the following disciplines:
NATA accredited calibration service
High voltage installation for Endeavour Energy, Ausgrid and Sydney Water
Testing for Endeavour Energy and Sydney Water
Pre-commissioning and commissioning for Endeavour Energy and Sydney Water & Sydney Catchment Authority
Accredited for cable jointing up to 132kV, combined with level 1 and level 2 electrical installations and line-work
Electricity distribution network design for Ausgrid and Endeavour Energy
Electricity distribution and sub-transmission design for Essential Energy
ISO accreditation ISO 14001:2015, ISO 9001:2015, AS/NZ 4801:2017
Compliance with NSW government work health & safety management systems (WHSMS) guidelines (Edition 5)
Victoria Electricity Supply Authority (VESA) compliant
Addelec Power Services are qualified, trained and experienced to work across a broad range of industries. INDUSTRIES WE SERVE
Our in-house electrical engineers are experienced designers in all areas across the electrical industry. They can take responsibility for conducting initial concept through to final design.
Level 3 design capabilitiesUrban residential, commercial and industrial subdivisionsUrban commercial and industrial connections of loadRural connectionsElectricity network asset relocationsMajor (High voltage) customer connectionsPublic lighting designPublic & private networks
DESIGN
Addelec Power Services provide a wide range of installation services in both the public and private sector. Authorised on NSW distribution networks for level 1 and 2 contestable works.
We are experienced in managing projects on established and green field sites from development to completion.
Services include:
Addelec has an experienced in-house civils crew for: Contestable works level 1 & level 2
Offsite preparation including factory builds and panel wiringSite preparation with in-house civil crewProject managementHigh voltage switch room and switchyard installationsLow Voltage generator & changeover switch installations
High voltage switchgear assembly, installation and testingLow voltage switchboard manufacture, installation, test and commissionHV and LV equipment installation including control and measurementLow voltage switchboard manufacture, installation, test and commission
Underground reticulation systems including pit & pipeExcavation and trenchingEarthingPole placementConcreting to support electrical works i.e. padmounts etc Service location
High voltage cable jointing and termination up to 133kVAccredited for Pfister, Subkabel products and XLPE terminationsInstallation of incoming HV supply (underground and overhead)Cabling, lighting and power installation
INSTALLATION
The integrity of any electrical installation once established cannot simply be taken for granted. Every electrical system no matter how good the initial installation, undergoes changes and deterioration throughout its lifetime.
In many cases these changes are not formally planned and managed, and their cumulative effect on the overall installation can give rise to problems.Addelec Power Services can tailor a comprehensive asset management and maintenance system to maximise productivity and reduce down time.
We have qualified crew of HV technicians who provide a range of maintenance services which include:
High voltage overhead linesHV substations (including circuit breakers and switchboards)High and low voltage transformersLow voltage plant and equipmentAddelec also offer 24/7 Emergency Response service
MAINTENANCE
Addelec have a state of the art purpose built stick refurbishment facility with a temperature, humidity and dust controlled environment to ensure the quality of the refurbishment is maintained year round.
Our experienced staff can repair a vast array of electronic instruments and safety equipment, including:
REPAIRSInstrument repairs and adjustmentsPETE repairsHV equipment repairsFibreglass refurbishments
The experienced team at Addelec Power Services are able to deliver professional testing and commissioning support on low and high voltage systems.Our high voltage engineers are well-equipped to test and commission all the equipment within your electrical transmission and distribution infrastructure, supplying comprehensive reports to authenticate our work.
Addelec Power Services can offer the following competencies :
HV Testing of Primary Equipment
Power transformer testingCurrent and voltage transformer testingCircuit breaker testingEarthing system testingHigh voltage cable testingHigh voltage insulation resistance testingPower frequency testingPrimary injection testingGenerator testing and commissioning
HV Testing of Secondary Equipment
Factory acceptance testing of protection & control relaysSite acceptance testing of protection & control relaysProtection scheme cut over and functional testingSatellite synchronisation equipment providing multiple end line protection testingFault recording & play back facilitiesRoutine protection system maintenanceProtection settings & test record database management
HV Commissioning
Secondary system design reviewAuditing of commissioning processesContract liaisonSystem outage co-ordinationInspection and test plan developmentCo-ordination with external requirements (AEMO)Site and project management
PROTECTION, TESTING & COMMISSIONING
Addelec regularly service the following equipment:
Safety and accuracy are paramount when it comes to electrical equipment, so it is important to ensure your tools are calibrated regularly and properly.Addelec Power Services can fully manage your testing and calibration requirements to ensure your safety and compliance, from initial test and calibration right up to record keeping and subsequent rescheduling, keeping ahead of all your audit requirements.
HV SAFETY EQUIPMENT CALIBRATIONS & TESTING
Multi-metersIR testers to 10kVCircuit breaker analyser,VLFClamp & multimetersVolt & ammetersInsulation testersEarth testersLoad & power quality loggers
Oil sample testersIR thermometersCable fault locatorsBattery load unitsEWPsHV indicators - modiewarksLive line gloves, mats, sticks & sleeves
Partial discharge unitsThermal camerasTransformer turns ratio meterCheck, update and restock LV rescue kitsCleaning of EWP live line trucks and associated equipmentRCD testingLead test & tag
SAFETY PRODUCT SALESInsulation testers / MeggerNeutral & Supply Testers Gloves & Sleeves
Earth Leads & Earth TestersOperating Sticks & AttachmentsMultimeters / Clamp Meters
Addelec Power Services are not only able to manufacture a range of products as per thelist below but also innovate and design products to meet your specific requirements.
Addelec offer repairs and servicing of all the items that we manufacture and offer on-going routine testing, servicing and maintenance to relevant standards
MANUFACTURE HIVOTECH 1500DC tester1500VDC short circuits and earths plus bagsHV earths & earthing kitsFully customisable HV operating sticksDischarge sticksOperating heads and adaptors including discharge heads
Modiewark adaptorsMeasuring sticksLV grab sticksOperating glove bagsDC tester kit bags
SWITCHING SERVICESWorking with high voltage equipment is a delicate process and requires patience, knowledge and skill which only those who have gone through the proper training will have.Addelec have a team of qualified HV switching operators who are able to:
Prepare high voltage switching plans Provide reliable switching and issuing of access permits
FOR MORE DETAILS CONTACT
ADDELEC POWER SERVICES PTY LTD
1300 795 262 | 1300 556 601 [email protected] www.addelec.com.au
Burnie Services
Keysborough Services
Wetherill Park &Campbelltown Services
BendigoServices
Perth ServicesAdelaide Services
Brisbane Services
Darwin Services