4
TM © 2018 Eclipse Lighting Inc. Eclipse Lighting pg.1 Rev. 3/23/2018 9245 W. Ivanhoe St. I Schiller Park, IL 60176 P: 847-260-0333 I F:847-260-0344 I E: [email protected] I W: eclipselightinginc.com CATALOG # TYPE PROJECT/LOCATION APPROVED BY We reserve the right to revise the design or components of any product without notice. 330° of Rotation Shown with WMB-R 330° of rotation Shown with WMB-R (6” length) Astro Side View Shown with UDB option 4" 4.719" 2" Astro Side View Shown with BB option (Non-ADA) Astro DECORATIVE HIGH ABUSE Wall Or Ceiling Mount ADA Compliant OPTIONS ARRA Compliant Astro L Shown with Opaque Top (OT) SPECIFICATIONS • DRIVER — Universal Volt 120/277v Electronic Driver is standard for LED. • EMERGENCY — LED — Remote or Integral. • HOUSING — 16 ga. heavy aluminum with welded ends for maximum strength and rigidity. Optional Up/Down Barrier (UDB)—internal, for uplight or downlight only. • BACKPLATE — 16 ga. aluminum die formed with multiple bends for maximum rigidity and unitized with all electrical components. FINISH — All metal parts are phosphate pre-treated and finished in oven baked polyester powder coat. Painted Natural Aluminum (PNA) is Standard, Optional Black (BK), Bronze (BZ) or White (WH). Optional Decorative Patterned Gravura Graphic Finishes also available. • LENS — .125 Clear Prismatic Polycarbonate Lens (CPR) is Standard and includes Glare Control. Opal Lens (OPL) and Satinized Polycarbonate Frosted Lens (SPF) are Optional. Optional Opaque Top (OQT — DarkSky Compliant) or Opaque Bottom (OQB). FASTENER — Stainless steel torx tamperproof screws to secure housing to backplate. • MOUNTING — Horizontal Wall Mount is Standard. Optional Vertical Wall, Ceiling, or Pen- dant Mount. Optional 6” length Wall Bracket Assembly Rotatable (WMB-R). LIGHT ENGINE — Energy Efficient Light Emitting Diode. • COMPLIANCE — Built to comply with U.S. and Canadian safety standards Suitable For Wet Locations. ADA Compliant Depth. ASTRO FEATURING GRAVURA GRAPHIC FINISHES Astro L — Red Burlwood (RBW) Astro L — Tan Burlwood (TBW) Astro L — White Gold Vein (WGV) See Page 3 for More Finishes Astro XL2 Pendant Mount - Black Carbon Fiber (BCF) Finish Astro XL2 Wall Mount - Light Oak Wood (LOW) Finish

ADA Compliant ARRA - Eclipse Lighting Inc.™ PDF/Astro.pdf · CLICK ASTRO PHOTOMETRIC DATA Test # 102063649CHI-009 AST-XL2-W-LED80-3K-EBU-BK Test Date: 07/02/2015 — Tested in accordance

Embed Size (px)

Citation preview

TM© 2018 Eclipse Lighting Inc.

Eclipse Lighting pg.1 Rev. 3/23/2018

9245 W. Ivanhoe St. I Schiller Park, IL 60176 P: 847-260-0333 I F:847-260-0344 I E: [email protected] I W: eclipselightinginc.com

CATALOG # TYPE

PROJECT/LOCATION

APPROVED BY

We reserve the right to revise the design or components of any product without notice.

330°of

Rotation

Shown with WMB-R 330° of rotationShown with WMB-R (6” length)

Astro Side View Shown with UDB option

4"

4.719"

2"

Astro Side View Shown with BB option (Non-ADA)

AstroDECORATIVE HIGH ABUSE Wall Or Ceiling Mount ADA Compliant

OPTIONS

ARRACompliant

Astro L Shown with Opaque Top (OT)

SPECIFICATIONS

• DRIVER — Universal Volt 120/277v Electronic Driver is standard for LED.• EMERGENCY — LED — Remote or Integral.• HOUSING — 16 ga. heavy aluminum with welded ends for maximum strength and rigidity.

Optional Up/Down Barrier (UDB)—internal, for uplight or downlight only.• BACKPLATE — 16 ga. aluminum die formed with multiple bends for maximum rigidity and

unitized with all electrical components.• FINISH — All metal parts are phosphate pre-treated and finished in oven baked polyester

powder coat. Painted Natural Aluminum (PNA) is Standard, Optional Black (BK), Bronze (BZ) or White (WH). Optional Decorative Patterned Gravura Graphic Finishes also available.

• LENS — .125 Clear Prismatic Polycarbonate Lens (CPR) is Standard and includes Glare Control. Opal Lens (OPL) and Satinized Polycarbonate Frosted Lens (SPF) are Optional. Optional Opaque Top (OQT — DarkSky Compliant) or Opaque Bottom (OQB).

• FASTENER — Stainless steel torx tamperproof screws to secure housing to backplate.• MOUNTING — Horizontal Wall Mount is Standard. Optional Vertical Wall, Ceiling, or Pen-

dant Mount. Optional 6” length Wall Bracket Assembly Rotatable (WMB-R).• LIGHT ENGINE — Energy Efficient Light Emitting Diode.• COMPLIANCE — Built to comply with U.S. and Canadian safety standards Suitable For Wet

Locations. ADA Compliant Depth.

ASTRO FEATURING GRAVURA GRAPHIC FINISHES

Astro L — Red Burlwood (RBW)Astro L — Tan Burlwood (TBW) Astro L — White Gold Vein (WGV)

See Page 3 for More Finishes

Astro XL2 Pendant Mount - Black Carbon Fiber (BCF) Finish

Astro XL2 Wall Mount - Light Oak Wood (LOW) Finish

TM© 2018 Eclipse Lighting Inc.

Eclipse Lighting pg.2 Rev. 3/23/2018

9245 W. Ivanhoe St. I Schiller Park, IL 60176 P: 847-260-0333 I F:847-260-0344 I E: [email protected] I W: eclipselightinginc.com

LAMP TYPE/QTY/WATTAGE ❶

Visit www.eclipselightinginc.com for available IES filesFixture Astro L Astro XL Astro XL1 Astro XL2Dimensions L x H x D 12” x 4.7” x 4” 26” x 4.7” x 4” 36” x 4.7” x 4” 48” x 4.7” x 4”

Light Emitting Diode LTLM Compatible

LED 15w / 30w 20w / 30wL 30w 40wL or 60/80w❷

*Consult Factory for CFL, Linear Fluorescent, HID, and Induction Lamping

NOTES:

❶ Consult Factory with requests regarding lamp sources, wattages or voltages not shown.❷ Backbox (BB) Required.❸ Consult Factory for additional Emergency Battery options.❽ 2EBU required.⓴ Max mounting height of fixture is 10’ (10 feet)� Due to form and fit, final selection of the Battery Pack under discretion of Factory.

ORDERING GUIDE:Series Lamp/Wattage Color Temp Voltage Finish OptionsMounting

SERIES AS-L = Astro L Series (12”) AS-XL = Astro XL Series (26”) AS-XL1 = Astro XL1 Series (36”)AS-XL2 = Astro XL Two Series (48”)

MOUNTING C = Ceiling Mount HR = Horizontal Wall Mount — STANDARD VT = Vertical Wall Mount PEND = Pendant Mount (Stems by Others)

LENS CPR = Clear Prismatic Polycarbonate — STANDARD —Includes Glare Control OPL = Opal Lens SPF = Satinized Polycarbonate Frosted

LAMP TYPE/QUANTITY/WATTAGE Refer to Above Chart

LED COLOR TEMPERATURE 3K = ±3000K range LED 4K = ±4000K range LED 5K = ±5000K range LED

VOLTAGE 120 = 120 Volts 277 = 277 Volts 347 = 347 Volts EBU = Universal Volt (120-277v) Electronic Driver 2EBU = Two Universal Volt (120-277v) Electronic Drivers

FINISH BK = Black BZ = Bronze CC = Custom Color PNA = Painted Natural Aluminum STANDARD WH = White MW = Anti-Microbial White*For Additional Gravura Graphic Finishes, See Page 4

OPTIONS 9002 = Tamperproof Screwdriver BB = Backbox for surface conduit or tandem runs (Non-ADA) FUS = Single Fusing DFUS = Double Fusing LVC = Low Voltage Controller NL = Night Light OQB = Opaque Bottom — Uplight Only OQT = Opaque Top — Downlight Only (DarkSky Compliant) PX = Perfex (Specify Finish) TDM = Tandem for Row Mount❷ — Includes Mounting Hardware UDB = Up/Down Barrier - For Use with 2EBU WMB-R = Wall Bracket Assembly Rotatable Mtg Kit (6” length)

LED OPTIONS BL1 = Bi-Level Light (High/Low) — Single AC Input Feed, with Switch Sensor (Required) BL2 = Bi-Level Light (High/Low)❽ — Wired for Dual AC Input Feeds D7 = 0-10V low-voltage LED Dimming D8 = LED Dimming: Forward Phase (Triac) SG = 10KA Surge Protection for LED fixtures (meets ANSI spec C62.41.2) MSE = Motion Sensor External—Single circuit-all on, all off Specify Finish: White (WH)/Bronze (BZ) MSE2 = Motion Sensor External—Dual circuit, half on half off Specify Finish: White (WH)/Bronze (BZ) MSI1 = Motion Sensor Integral⓴ (Microwave) —Single Circuit: OFF / ALL-ON MSI2 = Motion Sensor Integral⓴ (Microwave) —Single Circuit: HALF-ON / ALL-ON MSI3 = Motion Sensor Integral⓴ (Microwave) —Multi-Level Daylight Control —Single Circuit: OFF/ DIM / ALL-ON TLM = Tunable Linear Module —See Page 3 for TLM Options

EMERGENCY OPTIONS❸� No onsite Emergency Power (AC or DC) is provided Specify Fixture Voltage: 120V or 277V Power FeedA=120V or B=277V

LED Emergency Battery EL88❷ = LED 16 Watt (Integral) REL67 = LED 23 Watt Cold Weather (Remote) REL82 = LED 4 Watt (Remote) REL85 = LED 20 Watt (Remote) REL88 = LED 16 Watt (Remote

Lens

LED Watts vs. LED Color Temp — Lumen Output

Color Temperature 3000K (3K) 3500K (35K) 4000K (4K) 5000K (5K)

15 Watt 1866 Lumens 1897 Lumens 1950 Lumens 2012 Lumens

20 Watt 2354 Lumens 2394 Lumens 2460 Lumens 2539 Lumens

30 Watt 3470 Lumens 3528 Lumens 3626 Lumens 3742 Lumens

40 Watt 4709 Lumens 4788 Lumens 4921 Lumens 5078 Lumens

60 Watt❷ 6841 Lumens 6955 Lumens 7148 Lumens 7377 Lumens

80 Watt❷ 9369 Lumens 9526 Lumens 9790 Lumens 10,103 Lumens

NOTE: Lumen Output listed is estimated based upon delivered lumens at 25°C. For Additional information, see LM79 Report.

Projected LED Lumen Maintenance

Operating Hours Lumen Maintenance Factor

0 Hrs 1.0

25,000 Hrs 0.97

50,000 Hrs 0.95

100,000 Hrs 0.90

Lumen Ambient Temperature (LAT) Multipliers

Ambient Temperature Lumen Multiplier

0°C / 32°F 1.05

10°C / 50°F 1.03

20°C / 68°F 1.01

25°C / 77°F 1.00

30°C / 86°F 0.99

40°C / 104°F 0.96

NOTE: Use these multipliers to determine relative lumen output for average ambient temps for 0-40°C (32-104°F).

LED WATTAGE/LUMEN DATA CHARTS

ORDERING INFORMATION

TM© 2018 Eclipse Lighting Inc.

Eclipse Lighting pg.3 Rev. 3/23/2018

9245 W. Ivanhoe St. I Schiller Park, IL 60176 P: 847-260-0333 I F:847-260-0344 I E: [email protected] I W: eclipselightinginc.com

FULL SPECTRUM OPTIONS

TLML = TUNABLE LINEAR MODULE • araya5 Full Color Adjustability • Color Tunable White (1650-8000K) • Integrated Bluetooth / 0-10V

Optional Additional Controls for TLM DMX = DMX512-A-RDM Accessory Board DALI = DALI Accessory Board DLM = Digital Light Management —Accessory Board by Legrand/Wattstopper LTRN = Lutron EcoSystem Accessory Board

Click for Additional Information

1650K 8000K

Color Tunable White

RGB Spectrum

araya5® & Blanco are registered trademarks of Lumenetix

CLICK

ASTRO PHOTOMETRIC DATA

Test # 102063649CHI-009 AST-XL2-W-LED80-3K-EBU-BK Test Date: 07/02/2015 — Tested in accordance with LM-79-80. The results contained in this summary report pertain only to the tested sample.

Zonal Lumen Summary

Zone Lumens %Luminaire

0-30 645.6 15.6

0-40 1,025.0 24.8

0-60 1,678.2 40.7

60-90 388.7 9.4

0-90 2,066.9 50.1

90-180 2,058.1 49.9

0-180 4,125.0 100

Summary of ResultsTotal Lumen Output 4125Efficacy (Lm/W) 53.5

Electrical Test Conditions

Temp Voltage Input Current Input Power Power Factor

25ºC (±1ºC) 120.11 644.3 77.110 0.997

Cone of Light Tabulation

Mounting Height (Ft)

Center Beam FC

Beam Width (Ft)

8.3 12.42 15.8

16.7 3.10 31.7

25.0 1.38 47.5

33.3 0.78 63.4

41.7 0.50 79.2

50.0 0.34 95.0

TM© 2018 Eclipse Lighting Inc.

Eclipse Lighting pg.4 Rev. 3/23/2018

9245 W. Ivanhoe St. I Schiller Park, IL 60176 P: 847-260-0333 I F:847-260-0344 I E: [email protected] I W: eclipselightinginc.com

Astro L Gold Marble (GMB)

Astro L Maple with Gloss Finish

(MPL)

Astro L Walnut Grain (WNT)

ASTRO FEATURING GRAVURA GRAPHIC FINISHES

Astro L Light Oak Wood (LOW)

Astro L Travertine (TVT)

White Vein (WVN) Copper Hybrid (CHB) Silver Hybrid (SHB)

Handbrushed Swirl (HBS)

Gold Carbon Fiber (GCF) Black Carbon Fiber (BCF)

Stainless Steel (SST)

Tan Oak Wood (TOW)

Silver Blue Smoke (SBS)

Silver Flames (SFL)

Orange Camo Vista (OCV) Pink Swirl (PSW)Red Camo Vista (RCV)

Grey Diamond Plate (GDP) Handbrushed Aluminum (HBA)

Silver Carbon Fiber (SCF)

ADDITIONAL GRAVURA GRAPHIC FINISHES

Astro XL2 Ceiling Mount Black Carbon Fiber (BCF)

Astro XL2 Wall Mount White (WH)