Upload
others
View
24
Download
0
Embed Size (px)
Citation preview
© 2017 ACP, Inc.225 49th Avenue Drive SWCedar Rapids, Iowa 52404
REV.4Updated 1/13/2017
Page 1 of 5
Access the ACP Remote Programming Interface:
1. Open an internet browser and go to http://www.acpsolutions.com. Select the corresponding brand for your oven.2. Click on “See the Difference Now” to access information about different models.3. Select your model of oven.
4. Click on “ACP Remote Programming Interface” for your operating system (Windows or MAC). Your download will begin.
5. Open the downloaded “DesktopRelease32” compressed folder. Extract All files.6. Open “ACP-Application”. 7. Click “File”, then “New.” Select the appropriate model.
ACP Remote Programming Interface User GuideUse the ACP Remote Programming Interface to create and organize menu item information from your computer.
1 2
4
6
3
© 2017 ACP, Inc.225 49th Avenue Drive SWCedar Rapids, Iowa 52404
REV.4Updated 1/13/2017
Page 2 of 5
1
Change User Options:
1. Click on the “User Options” tab to access a variety of customizable settings.Note: The temperature set in the “User Options” section will be the default when creating a new menu item
Note: The default logo for the standby screen is the ACP, Inc. logo. Customize it and add your own logo by selecting the “Add Logo to Startup” button
Note: If password/PIN code is required, the chosen “password” must be a 4-digit numeric PIN
Add New Recipe Information:Add and organize recipe information by creating new recipes, folders and tabs.
Example: Tab 1: Lunch Menu Tab 2: Dinner MenuFolder A: Sandwiches Folder A: PizzaRecipe 1: Reuben Panini Recipe 1: Pepperoni Pizza Recipe 2: Muffuletta Panini Recipe 2: Cheese Pizza
Create a New Recipe Tab1. To organize recipes and/or recipe folders, create a recipe tab by clicking on the “Tabs” menu
and select the number of additional tabs desired.
1
© 2017 ACP, Inc.225 49th Avenue Drive SWCedar Rapids, Iowa 52404
REV.4Updated 1/13/2017
Page 3 of 5
1 2
Create a New Recipe Folder1. To organize recipes, create a recipe folder by clicking on
“New Folder.” 2. Double click on the folder icon to access the recipe
folder. Begin adding recipes by clicking on “New Recipe.”
Create a New Recipe:1. Select the “Menu” tab.2. Click on “New Recipe.”3. Click on the blue “New Recipe” icon to edit recipe information and settings.
To delete a recipe, click the orange trash can icon.4. Use the icons and menus to customize title, image, temperature, time, etc.*
*Select “No Preheat” under the “Temperature” menu to cook with microwave only.
1
2
3
3
© 2017 ACP, Inc.225 49th Avenue Drive SWCedar Rapids, Iowa 52404
REV.4Updated 1/13/2017
Page 4 of 5
Customize Recipe Images1. Click on the image icon to chose an image for the recipe. 2. Select one of the following options:
a. “Pictures” tab to view an assortment of stock images. b. “Icons” tab to choose from graphic iconsc. “Load Image” tab to upload a custom image for the recipe.
Load an Image:1*. Resize desired image to 380 x 223 pixels and save as PNG format. 2*. Select the folder icon to upload the custom image. (see figure 2c below)3. Navigate to the location of the image and select “Open.” 4. Select the green check mark to save.
*For custom image uploads only
2a 2b 2c
1
Save Information1. To save, click “File,” then “Save As.” Navigate to the USB flash drive and click “OK.”
Note: For the MXP and AXP touch model, files may be transferred via USB, WiFi or Ethernet connection. There are no restrictions on file name.
For all other models, files must be tagged with “ACP” and can only be transferred via USB.2.
2. There will be a XML file and an “Images” folder, with a zipped file as well (for uploading to the oven via Wi-Fi).
© 2017 ACP, Inc.225 49th Avenue Drive SWCedar Rapids, Iowa 52404
REV.4Updated 1/13/2017
Page 5 of 5
Edit an Existing Folder1. Open the ACP Remote Programming Interface from your computer.2. Select “File,” then “Open.” Navigate to the location of your XML file and open it
3. Click on the folder to edit the color, name, etc.4. To delete a folder, select the orange garbage can icon.5. To save changes and create a new updated file, select “File” then “Save As.”
Edit an Existing Recipe1. Open the ACP Remote Programming Interface from your computer.2. Select “File,” then “Open.” Navigate to the location of your XML file and open it.
3. Double-click to open the folder containing the recipe.4. Click on a recipe to edit the recipe name, image or cook settings.5. To delete a recipe, select the orange garbage can icon.6. To save changes and create a new updated file, select “File” then “Save As.”