AUDIO CONTROL PANELS

5 BUTTON AUDIO CONTROL PANEL - MK

ACP 105 MK

The ACP 105 MK is a configurable audio control panel

that interfaces with DMP 128 Plus audio processors.

It provides control of audio system functions such as

source selection and preset or macro recall. Up to

eight ACP Series control panels can be connected

per DMP 128 Plus. Each panel can be used for

independent control of a specific zone or an entire

combined space. The ACP 105 MK features five

customizable, soft-touch buttons that are backlit

for easy operation in low-light environments. It can

be configured easily using Extron DSP Configurator

Software. The ACP 105 MK includes a white faceplate

and mounts into one-gang MK boxes and enclosures

for use in the UK, Middle East, Singapore and other

regions using MK-type enclosures.

A Fully configurable button panel integrates easily with an Extron DMP 128 Plus Series audio DSP processor

A Five backlit, soft-touch buttons that can be customized using Extron's Custom Button Builder

A Two ACP ports allow for quick system expansion and upgrades

A Use a single button panel or combine up to eight button panels to accommodate a broad variety of system designs

A Simple yet elegant design blends well in any architectural environment

DESCRIPTIONDESCRIPTION

WORLDWIDE SALES OFFICES

www.extron.com

Anaheim • Rale igh • S i l icon Val ley • Dal las • New York • Washington, DC • Toronto • Mexico City • Par is • London

Frankfur t • Madr id • Stockholm • Amersfoor t • Moscow • Dubai • Johannesburg • Tel Av iv • Sydney • Melbourne

Bangalore • Mumbai • New Delh i • S ingapore • Seoul • Shanghai • Bei j ing • Hong Kong • Tokyo

06-201968-3450-01REV. ALetter - English - NP© 2019 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. Prices and specifications subject to change without notice.

SPECIFICATIONS

For complete specifications, please go to www.extron.comSpecifications are subject to change without notice.

ACP CONTROL INTERFACE

ACP control ports (2) 3.5 mm captive screw connectors, 4 poleACP pin configuration +V = +12 VDC; +S = + signal; -S = - signal; G = groundRecommended cable type Extron STP20-2/1000 or STP20-2P/1000 cable

SOFTWARE CONFIGURATION

Software Extron DSP Configurator

GENERAL

Power Power is supplied by and ACP processor or optional power supply

ACP power consumption 1.5 watts, 12 VDC (device only)Thermal dissipation 3.9 BTU/hrEnclosure dimensionsPlastic faceplate 3.4" H  x 3.4" W x 0.4" D (8.6 cm x 8.6 cm x 1 cm)Metal mounting plate 3.4" H  x 3.4" W x 0.6" D (8.5 cm x 8.5 cm x 1.6 cm)

(Fits the opening in a 1-gang MK wallplate)Device 1.8" H  x 1.8" W x 0.6" D (4.6 cm x 4.6 cm x 1.6 cm)

(Depth excludes faceplate and buttons)Device and captive screw 1.8" H  x 1.8" W x 1" D (4.6 cm x 4.6 cm x 2.6 cm)Product weight 0.2 lbs (0.1 kg)Regulatory compliance CE, c-UL, C-tick, FCC Class A, ICES, RoHS, UL, VCCI

Class A, WEEE, Section 508 of the Rehabilitation Act (29 U.S.C. 964d)

EMI/EMC CE, C-tick, FCC Class A, ICES, VCCIEnvironmental Complies with the appropriate requirements of RoHS, WEEEAccessibility Complies with the appropriate requirements of Section

508 of the Rehabilitation Act (29 U.S.C. 794d)Product warranty 3 years parts and labor Model Version Description Part numberACP 105 MK MK Mount, White, 5 Button 60-1860-23

DIGITAL MATRIX PROCESSOR

CONFIG

CLIPEXP LAN USB SIGNAL

CLIP

SIGNAL

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 89 10 11 12ACTIVITY

INPUTS OUTPUTS

DMP 128 Plus

XPA U 1004 SERIES

LIMITER/PROTECT

SIGNAL

OVERTEMP 4321

POWER AMPLIFIERS

ACP

AV Equipment Room Meeting Room A Meeting Room B

ExtronXPA U 1004-70VPower Ampli�er

ExtronSF 3CT LPSpeakers

ExtronSF 3PTSpeakers

Ch. 1 Ch. 2

Audio

Audio

AudioUSB Audio

Ch. 3 Ch. 4

ACP

ExtronACP 105 MKAudio ControlPanel

ExtronACP VC1 MKAudio ControlPanel

ExtronACP 105 MKAudio ControlPanel

ExtronACP VC1 MKAudio ControlPanel

ExtronDMP 128 Plus Digital Matrix Processor

PC

BGM 1

Mic

WiFi 1 2 3 4

1 2

TUNING

PUSH ENTER

TUNING

SEARCH STOP PLAY/PAUSEBACK

3 4 5 6 7 8 9 0

AUX INPOWER ON OFF

Stereo Media Player

BGM 2

1 2

TUNING

PUSH ENTER

TUNING

SEARCH STOP PLAY/PAUSEBACK

3 4 5 6 7 8 9 0

AUX INPOWER ON OFF

Stereo Media Player

BGM 3

1 2

TUNING

PUSH ENTER

TUNING

SEARCH STOP PLAY/PAUSEBACK

3 4 5 6 7 8 9 0

AUX INPOWER ON OFF

Stereo Media Player

BGM 4

1 2

TUNING

PUSH ENTER

TUNING

SEARCH STOP PLAY/PAUSEBACK

3 4 5 6 7 8 9 0

AUX INPOWER ON OFF

Stereo Media Player

SOURCE 5

SOURCE 4

SOURCE 1

SOURCE 2

SOURCE 3

VOLUME

MUTESOURCE 5

SOURCE 4

SOURCE 1

SOURCE 2

SOURCE 3

VOLUME

MUTE

The ACP Series of configurable audio control panels interface with the DMP 128 Plus audio processors to provide volume adjustment for mixing and zone control, plus preset or macro recall for room configuration. Up to eight ACP Series control panels can be installed around a meeting space and linked together. Each panel can be used for independent control of a specific zone or to adjust audio settings for the entire combined space. The ACP Series button panels are easy to configure using Extron DSP Configurator Software.

ACP Series audio control panels can be mounted in a lectern to provide easy access to mic volume, program volume, and source selection. Mounted on a wall, ACP panels provide an easy means of controlling individual and combined speaker zones in divisible meeting spaces. Since ACP panels are similar in physical appearance to many other Extron button panels, such as MediaLink Controllers, Network Button Panels, and eBus, they can be used together throughout a facility, maintaining a consistent look and user experience. Buttons can be easily customized using Extron Button Label Generator software or the online Custom Button Builder tool.

APPLICATION DIAGRAM