Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Roof and F loor Dra i ns
ACO WEXEL
Technical Handbook and Product Catalogue
Stainless steel push-fit floor drains
Cast iron floor drains with stainless steel grates
Cast iron roof drains
ACO Building Drainage Products
2 3
www.acowexel.com.au
ACO. The future of drainage.
System Chain
ACO is a global leader in water management, with products
to collect, clean, hold and release water; addressing all phases
of the water cycle and supporting water sensitive urban design.
ACO Wexel focuses on products that address the ‘collect’ phase
of the water cycle.
Service Chain
To support this extensive product range, ACO provides full support
from design conception to final installation.
Customer services include in-house project specific design
services, field support including installation advice. Product
training and up to date professional education seminars provide
the design community with the latest product information.
The ACO Group
Founded in 1946, the ACO Group
manufactures products for the
building and construction industry.
ACO was established in Australia
in 1993 and is Australasia’s leading
manufacturer of drainage products.
ACO has extensive experience in
manufacturing and supplying a
diverse range of drainage systems
throughout Australia and overseas.
ACO Wexel
A range of cast iron roof and floor
drains for use in both internal and
external areas.
ACO’s floor and roof drains have
WaterMark approval. This is
granted to products that comply
to AS 5200.000 or AS 3495 and
certified in accordance with
ISO/IEC Guide 67.2004, System 1b.
ATS 5200.040CERTIFICATE NO. 23120
For installations requiring a full
stainless steel body and grate,
refer to ACO Gully catalogue.
Areas of application
Commercial kitchens
Food processing areas
Supermarkets
Paved areas
Suspended slabs
Hospitals
Medical centres
Commercial buildings
Multistory car parks
ACO Polycrete Pty Ltd, Head Office at Emu Plains NSW Australia
2 3
www.acowexel.com.au
ACO WEXEL
Introduction
ACO Wexel is a range of cast iron roof and floor drains to suit almost any application, from pedestrian areas to flat roofs on any commercial or industrial project.
Stainless steel floor grates are available both with and without cast iron bodies, for either a push-fit or deep body connection.
There are a number of options of iron bodies available. Adjustable height tops accommodate various floor and roof levels. Clamp rings and puddle flanges accommodate different waterproof membranes. Bucket traps and other variants are available.
Range includes
1. Floor drains with a choice of round or square grates to suit all floor finishes, including vinyl sheet
2. Roof drains with flat or domed grates
3. Fixed or adjustable height drains
4. Drains for DN50, DN100, DN150 horizontal and vertical pipe connection
5. Full range of accessories
The benefits
Robust cast iron bodies
High quality linished stainless steel floor grates
Push-fit grates and bodies compatible with HDPE and PVC pipe
Durable hot dipped galvanised iron roof grates
Table of contents
Product selector 4
Load class 6
Hydraulic data 7
Floor drains – push-fit 8
Floor drains – full bodied 12
Roof drains 24
Other products and accessories 28
Installation guide 32
Care and maintenance 38
Chemical resistance table 39
4 5
www.acowexel.com.au
1. Floor drains – push-fitPush-in floor drains with ‘O’ ring seals, to provide a quick and watertight connection for both PVC and HDPE pipe. Complete with linished stainless steel grates. Round grates Square gratesOutlet size (mm) 50 100 50 100Load class L15 up to L15 L15 L15Membrane provision 8 8 8 8
Fixed (secondary) strainer 8 8 8 8
Removable (primary) strainer 4 4 4 4
Height adjustable 8 8 8 8
Vinyl grate (clamp) 8 4 8 8
Heelguard grate 4 4 4 4
Page 10 Page 11
2. Floor drains – full bodied A comprehensive range of adjustable height full bodied floor drains with stainless steel grates for vertical and horizontal pipe connection. A variety of sizes from compact to deep variants are available, depending on the application’s requirements.
Vertical utility floor drains Vertical short floor drains Vertical deep floor drains Vertical puddle flange floor drains Horizontal floor drains
Round grates Square grates Round grates Square grates Round grates Square grates Round grates Square grates Round grates Square gratesOutlet size (mm) 100 100 50 100 50 100 100 100 100 150 100 150 50 100 50 100Load class up to L15 L15 L15 up to L15 L15 L15 up to L15 L15 up to L15 up to L15 L15 L15 L15 up to L15 L15 L15Membrane provision 8 8 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Fixed (secondary) strainer 8 8 8 8 8 8 4 4 8 8 8 8 8 8 8 8
Removable (primary) strainer 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Height adjustable 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Vinyl grate (clamp) 4 8 8 4 8 8 4 8 4 4 8 8 8 4 8 8
Heelguard grate 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23
3. Roof drainsRoof drains with hot dipped galvanised iron grates for conventional run-off collection. Suitable for flat roofs, car parks and similar areas.
Flat grates Domed gratesOutlet size (mm) 100 150 100 150Load class up to M125 up to M125 N/A N/AMembrane provision 4 4 4 4
Fixed (secondary) strainer 8 8 8 8
Removable (primary) strainer 8 8 8 8
Height adjustable 4 4 4 4
Vinyl grate (clamp) 8 8 8 8
Heelguard grate 8 8 8 8
Page 26 Page 27
4. Other products and accessories
Planter drain outlets Clean-outs Strainer basketsOutlet size (mm) 100 100 100 150Load class H1.5 L15 – –Membrane provision 4 8 – –Fixed (secondary) strainer 8 8 4 4
Removable (primary) strainer 8 – 4 4
Height adjustable 4 8 – –Vinyl grate (clamp) 8 4 – –Heelguard grate 8 – – –
Page 29 Page 30 Page 31
Product selector
4 5
www.acowexel.com.au
ACO WEXEL
1. Floor drains – push-fitPush-in floor drains with ‘O’ ring seals, to provide a quick and watertight connection for both PVC and HDPE pipe. Complete with linished stainless steel grates. Round grates Square gratesOutlet size (mm) 50 100 50 100Load class L15 up to L15 L15 L15Membrane provision 8 8 8 8
Fixed (secondary) strainer 8 8 8 8
Removable (primary) strainer 4 4 4 4
Height adjustable 8 8 8 8
Vinyl grate (clamp) 8 4 8 8
Heelguard grate 4 4 4 4
Page 10 Page 11
2. Floor drains – full bodied A comprehensive range of adjustable height full bodied floor drains with stainless steel grates for vertical and horizontal pipe connection. A variety of sizes from compact to deep variants are available, depending on the application’s requirements.
Vertical utility floor drains Vertical short floor drains Vertical deep floor drains Vertical puddle flange floor drains Horizontal floor drains
Round grates Square grates Round grates Square grates Round grates Square grates Round grates Square grates Round grates Square gratesOutlet size (mm) 100 100 50 100 50 100 100 100 100 150 100 150 50 100 50 100Load class up to L15 L15 L15 up to L15 L15 L15 up to L15 L15 up to L15 up to L15 L15 L15 L15 up to L15 L15 L15Membrane provision 8 8 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Fixed (secondary) strainer 8 8 8 8 8 8 4 4 8 8 8 8 8 8 8 8
Removable (primary) strainer 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Height adjustable 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Vinyl grate (clamp) 4 8 8 4 8 8 4 8 4 4 8 8 8 4 8 8
Heelguard grate 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23
3. Roof drainsRoof drains with hot dipped galvanised iron grates for conventional run-off collection. Suitable for flat roofs, car parks and similar areas.
Flat grates Domed gratesOutlet size (mm) 100 150 100 150Load class up to M125 up to M125 N/A N/AMembrane provision 4 4 4 4
Fixed (secondary) strainer 8 8 8 8
Removable (primary) strainer 8 8 8 8
Height adjustable 4 4 4 4
Vinyl grate (clamp) 8 8 8 8
Heelguard grate 8 8 8 8
Page 26 Page 27
4. Other products and accessories
Planter drain outlets Clean-outs Strainer basketsOutlet size (mm) 100 100 100 150Load class H1.5 L15 – –Membrane provision 4 8 – –Fixed (secondary) strainer 8 8 4 4
Removable (primary) strainer 8 – 4 4
Height adjustable 4 8 – –Vinyl grate (clamp) 8 4 – –Heelguard grate 8 – – –
Page 29 Page 30 Page 31
6 76 7
www.acowexel.com.au
Load class
There is no Australian Standard that governs the performance of floor gullies. ACO believes that EN 1253, specifically written to regulate these types of products, is the most appropriate International Standard.
EN 1253 – Gullies for buildings 1. Scope ‘This Standard classifies gullies, gives guidance for places of installation and specifies requirements for construction, design, performance and marking of factory gullies, irrespective of material, for use in drainage systems operating under gravity including siphonic systems.’
The table below is created to give designers, installers and users assistance in selecting the correct product.
The table is based on loadings outlined in EN 1253 and is cross referenced with AS 3996 – Access covers and grates, the most relevant Australian Standard for load classifications. ACO has gained NATA accreditation (No.15193) for its testing laboratory and can provide test reports to EN 1253.
Standards only give an objective means for comparing products. There are a number of key factors affecting a product’s resistance to load and additional consideration must be given to:
1. Type of traffic Consider the weight of loads being carried, for example forklifts, trolleys and trucks.
2. Wheel type Solid tyres exert more stress through smaller contact areas than pneumatic tyres, so a heavier duty grate may be required. Note, laden trolleys can intensify the load.
3. Frequency and speed of traffic More frequent and faster traffic can intensify the load.
4. Position of gully If the product is positioned where traffic will be turning or braking, or if it is installed at the bottom of a ramp, the gully will be subjected to extreme forces.
EN 1253 – Gullies for buildings
Load Classes
H1.51.5kN
K33kN
L1515kN
R5050kN
M125125kN
N250250kN
Non-load bearing areas, inaccessible to all types of traffic
Pedestrian areas, change rooms,
toilets and areas inaccessible to regular
vehicular traffic
Light commercial and industrial
areas inaccessible to solid tyres
Light commercial and industrial
areas accessible to solid tyres
Commercial and industrial areas accessible to solid tyres and
pallet jacks
Commercial and industrial areas
subject to heavy traffic
Slow moving wheel load (Pneumatic tyres)
N/A 150kg 700kg 2500kg 5000kg 8000kg
Slow moving wheel load (Solid tyres)
N/A N/A N/A 500kg 750kg 1000kg
Equivalent classification to AS 3996 – Access covers and grates
Load Classes
A10kN
B80kN
C150kN
D210kN
Note: For higher load classes contact ACO.
www.acowexel.com.au
ACO WEXEL
6 76 7
Hydraulic data
Water flow is restricted by the open area of grate. For the ACO Wexel range, there is no further Head of water (H=20mm)
reduction of flow from the underlying bodies. The head of water creates pressure and is also part of the calculation.
The table below shows the flow rate based on the diagram shown right.
Note that fixed or removable strainers will reduce the flow rates.
Part No.Intake area
(mm²)
Outlet discharge 20mm head
Q (L/s)
Floo
r dr
ains
– p
ush-
fit
Pg 10
141855 2,404 0.98
141856 5,503 2.24
141857 4,173 1.70
141958 N/A N/A
141858 6,901 2.81
Pg 11
141859 2,919 1.19
141860 7,216 2.94
141861 13,734 5.59
Vert
ical
util
ity fl
oor
drai
ns
Pg 14
141870 5,503 2.24
141871 11,199 4.56
141872 4,173 1.70
141873 6,901 2.81
Pg 15
141874 7,216 2.94
141875 13,734 5.59
Vert
ical
sho
rt fl
oor
drai
ns
Pg 16
141862 2,404 0.98
141863 5,503 2.24
141864 11,199 4.56
141865 4,173 1.70
141866 6,901 2.81
Pg 17
141867 2,919 1.19
141868 7,216 2.94
141869 5,503 2.24
Vert
ical
dee
p flo
or d
rain
s
Pg 18
141876 5,503 2.24
141877 11,199 4.56
141878 4,173 1.70
141879 6,901 2.81
Pg 19
141880 7,216 2.94
141881 13,734 5.59
141882 28,310 11.53
Part No.Intake area
(mm²)
Outlet discharge 20mm head
Q (L/s)
Vert
ical
pud
dle
flang
e flo
or d
rain
s
Pg 20
141883 5,503 2.24
141884 11,199 4.56
141885 4,173 1.70
141886 6,901 2.81
141887 5,503 2.24
141888 11,199 4.56
141889 4,173 1.70
141890 6,901 2.81
Pg 21
141891 7,216 2.94
141892 13,734 5.59
141893 28,310 11.53
141894 7,216 2.94
141895 13,734 5.59
141896 28,310 6.91
Hor
izon
tal fl
oor
drai
ns
Pg 22
141897 2,404 0.98
141898 5,503 2.24
141899 11,199 4.56
141900 4,173 1.70
141901 6,901 2.81
Pg 23
141902 2,123 0.86
141903 7,216 2.94
141904 13,734 5.59
Roo
f dr
ains
Pg 26
141905 15,180 6.18
141906 15,858 6.46
141907 22,255 9.06
141908 15,180 6.18
141909 15,858 6.46
141910 16,971 6.91
141911 15,180 6.18
141912 15,858 6.46
141913 15,180 6.18
141914 15,858 6.46
Pg 27
141915 36,576Contact ACO141916 36,576
141917 36,576
141918 36,576
8 9
www.acowexel.com.au
Floor drains – push-fit
A push-in floor drain with ‘O’ ring seals to provide a quick watertight connection for both PVC and HDPE pipe. Complete with linished stainless steel grates.
Linished stainless steel Heelguard grates for a high quality finish.
Meets ASME A112.6.3 Section 7.12 (American high heel standard) and complies with AS 3996 – Clause 3.3.5 Surface Openings in pedestrian areas.
Circular grates are ideal for use in screeded and vinyl sheet floors, a neat finish can be achieved around the circular bevel.
Square grates can be used in any application, but are ideal for use in tiled floors as they are available in common tile sizes and allow easy tile cuts for a neat finish.
Removable (primary) strainer baskets for ease of maintenance.
Choice of ‘O’ rings are supplied, compatible with either PVC and HDPE pipes.
8 9
www.acowexel.com.au
ACO WEXEL
10 11
www.acowexel.com.au
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize
Overalldepth
Grateheight
Wgtkg
A B D E
141855 RP1005 Push-in grates: 50mmØ outlet with 100mmØ grate L15 50 100 50 26 0.5
141856 RP1510 Push-in grates: 100mmØ outlet with 150mmØ grate1 L15 100 150 65 27 1.2
141857 VP1410 Push-in grates: 100mmØ outlet with 140mmØ vinyl grate L15 100 140 65 27 1.1
141858 VP1810 Push-in grates: 100mmØ outlet with 180mmØ vinyl grate1 K3 100 180 75 36 2.0
141958 VP1410S Push-in solid top clean-out: 100mmØ outlet with 140mmØ vinyl grate L15 100 140 65 27 1.3
142112 R1510S Push-in solid top clean-out: 100mmØ outlet with 150mmØ grate L15 100 150 65 27 1.4
141696 RPBT1510 Push-in grates: 100mmØ outlet with 150mmØ grate with fixed and removable strainer L15 100 150 165 27 1.4
Notes: 1. Removable strainer basket available, Part No. 141920 to suit nominal 100mm diameter – see page 31 2. All dimensions are in mm
Stainless steel lockable Heelguard grate assembly (also available as solid top for clean-out – see table below and page 30)
VP1410 shown
Vinyl clamp with M6 Hex socket screws
B
A
DE
Plan view
Section view
Vertical floor drains – push-fit round grates
Push-in floor drains, complete with ‘O’ ring seals, to provide a fast watertight connection.
RP1510 shown
M6 Hex socket screws
Nitrile rubber seal to allow push in joint connection to suit PVC and HDPE pipe
10 11
www.acowexel.com.au
ACO WEXEL
Push-in floor drains, complete with ‘O’ ring seals, to provide a fast watertight connection.
B
A
DE
Plan view
Section view
M6 Hex socket screws
Nitrile rubber seal to allow push in joint connection to suit PVC and HDPE pipe
Stainless steel lockable Heelguard grate assembly (grates 150x150mm and larger are hinged)
SP1510 shown
Vertical floor drains – push-fit square grates
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize
Overalldepth
Grateheight
Wgtkg
A B D E
141859 SP1005 Push-in grates: 50mmØ outlet with 100x100mm grate L15 50 100 50 26 0.7
141860 SP1510 Push-in grates: 100mmØ outlet with 150x150mm grate1 L15 100 150 65 30 1.6
141861 SP2010 Push-in grates: 100mmØ outlet with 200x200mm grate1 L15 100 200 78 43 3.2
141970 RPBT1510 Push-in grates: 100mmØ outlet with 150mmx150mm grate with fixed and removable strainer L15 100 150 165 30 1.9
141971 SPBT2010 100mmØ outlet with Heelguard 200mmx200mm grate with fixed and removable strainer L15 100 200 178 43 3.6
Notes: 1. Removable strainer basket available, Part No. 141920 to suit nominal 100mm diameter – see page 31 2. All dimensions are in mm
12 13
www.acowexel.com.au
Floor drains – full bodied
A comprehensive range of adjustable height full bodied floor drains with stainless steel grates for vertical and horizontal pipe connections. A variety of sizes from compact to deep variants are available depending on the application.
Linished stainless steel Heelguard grates for a high quality finish.
Meets ASME A112.6.3 Section 7.12 (American high heel standard) and complies with AS 3996 – Clause 3.3.5 Surface Openings in pedestrian areas.
Circular grates are ideal for use in screeded and vinyl sheet floors, a neat finish can be achieved around the circular bevel.
Puddle flanges available on some models for paintable waterproof membranes.
Membrane clamp ring is available on most models to preserve the integrity of the floor waterproofing.
Square grates can be used in any application, but are ideal for use in tiled floors as they are available in common tile sizes and allow easy tile cuts for a neat finish.
Stainless steel removable (primary) strainer baskets and fixed (secondary) strainers for sediment and trade waste applications.
12 13
www.acowexel.com.au
ACO WEXEL
14 15
www.acowexel.com.au
A basic variable height floor drain for use in areas where a membrane clamp ring is not required, such as on a ground floor slab.
Cast iron body
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
Stainless steel height adjustable assembly with lockable Heelguard grate to suit finished floor level (also available with vinyl floor grate – see table below)
E10R15 shown
M6 Hex socket screws
Vertical utility floor drains – round grates
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize Ø
Overalldepth
Adjustable grate height
Wgtkg
Min Max Min Max
A B D E
141870 E10R15 Utility floor drain: 100mmØ outlet with 150mmØ grate1 L15 100 150 125 150 25 50 4.0
141871 E10R20 Utility floor drain: 100mmØ outlet with 200mmØ grate1 L15 100 200 139 176 39 76 5.1
141872 E10V14 Utility floor drain: 100mmØ outlet with 140mmØ vinyl grate L15 100 140 133 148 33 48 4.0
141873 E10V18 Utility floor drain: 100mmØ outlet with 180mmØ vinyl grate1 K3 100 180 133 148 33 48 4.5
Notes: 1. Removable strainer basket available, Part No. 141920 to suit nominal 100mm diameter – see page 31 2. Body and grate assemblies are also sold separately, contact ACO 3. All dimensions are in mm
B
A
D
E
Plan view
Section view
14 15
www.acowexel.com.au
ACO WEXEL
A basic variable height floor drain for use in areas where a membrane clamp ring is not required, such as on a ground floor slab.
Cast iron body
Stainless steel height adjustable assembly with lockable Heelguard grate to suit finished floor level (grates 150x150mm and larger are hinged)
M6 Hex socket screws
E10S15 shown
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
Vertical utility floor drains – square grates
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize
Overalldepth
Adjustable grate height
Wgtkg
Min Max Min Max
A B D E
141874 E10S15 Utility floor drain: 100mmØ outlet with 150x150mm grate1 L15 100 150 131 168 31 68 4.8
141875 E10S20 Utility floor drain: 100mmØ outlet with 200x200mm grate1 L15 100 200 139 176 39 76 6.6
Notes: 1. Removable strainer basket available, Part No. 141920 to suit nominal 100mm diameter – see page 31 2. Body and grate assemblies are also sold separately, contact ACO 3. All dimensions are in mm
B
A
D
E
Plan view
Section view
16 17
www.acowexel.com.au
A short variable height floor drain for use in concrete and vinyl floors in plant rooms, walkways, hospitals, commercial kitchens, food processing plants and industrial laundries.
Cast iron body
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
M6 Hex head bolt
Stainless steel height adjustable assembly with lockable Heelguard grate to suit finished floor level (also available with vinyl floor grate – see table below)M6 Hex socket screws
S10R15 shown
Weep holes to ensure integrity of waterproof membrane
Cast iron clamp ring
Vertical short floor drains – round grates
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize Ø
Bodysize Ø
Overalldepth
Adjustable grate height WgtkgClamp down Clamp up
Min Max Min Max Min Max
A B C D E 1 E 2
141862 S05R10 Short floor drain: 50mmØ outlet with 100mmØ grate L15 50 100 138 120 173 25 50 53 78 4.5
141863 S10R15 Short floor drain: 100mmØ outlet with 150mmØ grate1 L15 100 150 209 137 180 30 50 51 73 9.2
141864 S10R20 Short floor drain: 100mmØ outlet with 200mmØ grate1 K3 100 200 209 157 206 50 76 59 99 9.3
141865 S10V14 Short floor drain: 100mmØ outlet with 140mmØ vinyl grate L15 100 140 209 141 178 34 48 56 71 9.2
141866 S10V18 Short floor drain: 100mmØ outlet with 180mmØ vinyl grate1 K3 100 180 209 107 178 36 49 56 71 9.7
Notes: 1. Removable strainer basket available, Part No. 141920 to suit nominal 100mm diameter – see page 31 2. Body and grate assemblies are also sold separately, contact ACO 3. All dimensions are in mm
C
E1
A
D
E2
D
B
With clamp ring facing down
With clamp ring facing up
Plan view
Section view
16 17
www.acowexel.com.au
ACO WEXEL
A short variable height floor drain for use in concrete and tiled floors in plant rooms, walkways, hospitals, commercial kitchens, food processing plants and industrial laundries.
Vertical short floor drains – square grates
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize
Bodysize Ø
Overalldepth
Adjustable grate height WgtkgClamp down Clamp up
Min Max Min Max Min Max
A B C D E 1 E 2
141867 S05S10 Short floor drain: 50mmØ outlet with 100x100mm grate L15 50 100 138 124 177 29 54 57 82 4.6
141868 S10S15 Short floor drain: 100mmØ outlet with 150x150mm grate1 L15 100 150 209 149 198 42 68 51 91 10.0
141869 S10S20 Short floor drain: 100mmØ outlet with 200x200mm grate1 L15 100 200 209 157 206 50 76 59 99 11.8
Notes: 1. Removable strainer basket available, Part No. 141920 to suit nominal 100mm diameter – see page 31 2. Body and grate assemblies are also sold separately, contact ACO 3. All dimensions are in mm
C
B
E1
A
D
E2
D
Plan view
Section view
With clamp ring facing down
With clamp ring facing up
Weep holes to ensure integrity of waterproof membrane
Stainless steel height adjustable assembly with lockable Heelguard grate to suit finished floor level (grates 150x150mm and larger are hinged)
S10S15 shown
Cast iron body
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
M6 Hex head bolt
M6 Hex socket screws
Cast iron clamp ring
18 19
www.acowexel.com.au
A deep variable height floor drain, primarily for use in trade waste applications such as food processing plants, garbage rooms and compactor rooms.
Cast iron body
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
Cast iron clamp ring
M8 Hex head bolt
Stainless steel height adjustable assembly with lockable Heelguard grate to suit finished floor level (also available as vinyl floor grate – see table below)
D10R15 shown
M6 Hex socket screws
Weep holes to ensure integrity of waterproof membrane
Vertical deep floor drains – round grates
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize Ø
Bodysize Ø
Overalldepth
Adjustable grate height WgtkgClamp down Clamp up
Min Max Min Max Min Max
A B C D E 1 E 2
141876 D10R15 Deep floor drain: 100mmØ outlet with 150mmØ grate1 L15 100 150 279 284 324 28 50 46 68 17.5
141877 D10R20 Deep floor drain: 100mmØ outlet with 200mmØ grate1 K3 100 200 279 292 350 36 76 54 94 18.5
141878 D10V14 Deep floor drain: 100mmØ outlet with 140mmØ vinyl grate L15 100 140 279 289 322 33 48 51 66 17.3
141879 D10V18 Deep floor drain: 100mmØ outlet with 180mmØ vinyl grate1 K3 100 180 279 289 322 33 48 51 66 17.8
Notes: 1. Strainer baskets available, Part No. 141920 (removable) to suit nominal 100mm diameter and Part No. 141921 (fixed) – see page 31 2. Body and grate assemblies are also sold separately, contact ACO 3. All dimensions are in mm
CB
A
D
E2
E1
D
With clamp ring facing down
With clamp ring facing up
Plan view
Section view
18 19
www.acowexel.com.au
ACO WEXEL
A deep variable height floor drain, primarily for use in trade waste applications such as food processing plants, garbage rooms and compactor rooms.
M6 Hex socket screws
D10S15 shown
Cast iron body
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
M8 Hex head bolt
Stainless steel height adjustable assembly with lockable Heelguard grate to suit finished floor level (grates 150x150mm and larger are hinged)
Cast iron clamp ring
Weep holes to ensure integrity of waterproof membrane
Vertical deep floor drains – square grates
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize
Bodysize Ø
Overalldepth
Adjustable grate height WgtkgClamp down Clamp up
Min Max Min Max Min Max
A B C D E 1 E 2
141880 D10S15 Deep floor drain: 100mmØ outlet with 150x150mm grate1 L15 100 150 279 284 342 28 68 46 86 18.3
141881 D10S20 Deep floor drain: 100mmØ outlet with 200x200mm grate1 L15 100 200 279 292 350 36 76 54 94 19.9
141882 D10S30 Deep floor drain: 100mmØ outlet with 300x300mm grate2 L15 100 300 279 305 374 50 100 67 118 26.5
Notes: 1. Strainer baskets available, Part No. 141920 (removable) to suit nominal 100mm diameter and Part No. 141921 (fixed) – see page 31 2. Strainer baskets available, Part No. 141923 (removable) to suit nominal 150mm diameter and Part No. 141921 (fixed) – see page 31 3. Body and grate assemblies are also sold separately, contact ACO 4. All dimensions are in mm
C
B
A
D
E2
E1
D
With clamp ring facing down
With clamp ring facing up
Plan view
Section view
20 21
www.acowexel.com.au
A variable height floor drain incorporating a puddle flange with weep holes to allow for seepage around the outlet to be collected. Suitable for use in multi-level buildings, plant rooms, hospitals, shopping centres, commercial kitchens and food processing plants.
Stainless steel height adjustable assembly with lockable Heelguard grate to suit finished floor level (also available as vinyl floor grate – see table below)
Integral puddle flange and weep holes to collect seepage
R10R15 shown
Cast iron body
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
M6 Hex head bolt
M6 Hex socket screws
Cast iron clamp ring
Weep holes to ensure integrity of waterproof membrane
Vertical floor drains with puddle flange – round grates
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize Ø
Bodysize Ø
Overalldepth
Adjustable grate height
Wgtkg
Min Max Min Max
A B C D E
141883 R10R15 Vertical floor drain with puddle flange: 100mmØ outlet with 150mmØ grate1 L15 100 150 320 162 184 36 58 13.7
141884 R10R20 Vertical floor drain with puddle flange: 100mmØ outlet with 200mmØ grate1 K3 100 200 320 170 210 44 84 14.7
141885 R10V14 Vertical floor drain with puddle flange: 100mmØ outlet with 140mmØ vinyl grate1 L15 100 140 320 167 182 41 56 13.6
141886 R10V18 Vertical floor drain with puddle flange: 100mmØ outlet with 180mmØ vinyl grate1 K3 100 180 320 167 182 41 56 14.2
141887 R15R15 Vertical floor drain with puddle flange: 150mmØ outlet with 150mmØ grate1 L15 150 150 320 162 184 36 58 15.6
141888 R15R20 Vertical floor drain with puddle flange: 150mmØ outlet with 200mmØ grate1 K3 150 200 320 170 210 44 84 16.6
141889 R15V14 Vertical floor drain with puddle flange: 150mmØ outlet with 140mmØ vinyl grate L15 150 140 320 167 182 41 56 15.5
141890 R15V18 Vertical floor drain with puddle flange: 150mmØ outlet with 180mmØ vinyl grate1 K3 150 180 320 167 182 41 56 15.9
Notes: 1. Removable strainer basket available, Part No. 141920 to suit nominal 100mm diameter – see page 31 2. Body and grate assemblies are also sold separately, contact ACO 3. All dimensions are in mm
C
E
B
A
D
Plan view
Section view
20 21
www.acowexel.com.au
ACO WEXEL
A variable height floor drain incorporating a puddle flange with weep holes to allow for seepage around the outlet to be collected. Suitable for use in multi-level buildings, plant rooms, hospitals, shopping centres, commercial kitchens and food processing plants.
M6 Hex socket screws
R10S15 shown
Integral puddle flange and weep holes to collect seepage
Cast iron body
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
M6 Hex head bolt
Stainless steel height adjustable assembly with lockable Heelguard grate to suit finished floor level (grates 150x150mm and larger are hinged)
Cast iron clamp ring
Weep holes to ensure integrity of waterproof membrane
Vertical floor drains with puddle flange – square grates
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize
Bodysize Ø
Overalldepth
Adjustable grate height
Wgtkg
Min Max Min Max
A B C D E
141891 R10S15 Vertical floor drain with puddle flange: 100mmØ outlet with 150x150mm grate1 L15 100 150 320 162 202 36 76 14.4
141892 R10S20 Vertical floor drain with puddle flange: 100mmØ outlet with 200x200mm grate1 L15 100 200 320 170 210 44 84 16.2
141893 R10S30 Vertical floor drain with puddle flange: 100mmØ outlet with 300x300mm grate2 L15 100 300 320 183 234 57 108 23.0
141894 R15S15 Vertical floor drain with puddle flange: 150mmØ outlet with 150x150mm grate1 L15 150 150 320 162 202 36 76 16.4
141895 R15S20 Vertical floor drain with puddle flange: 150mmØ outlet with 200x200mm grate1 L15 150 200 320 170 210 44 84 18.2
141896 R15S30 Vertical floor drain with puddle flange: 150mmØ outlet with 300x300mm grate2 L15 150 300 320 183 234 57 108 24.8
Notes: 1. Removable strainer basket available, Part No. 141920 to suit nominal 100mm diameter – see page 31 2. Removable strainer basket available, Part No. 141923 to suit nominal 150mm diameter – see page 31 3. Body and grate assemblies are also sold separately, contact ACO 4. All dimensions are in mm
C
B
A
E
D
Plan view
Section view
22 23
www.acowexel.com.au
A short, compact, variable height floor drain with a 90˚ outlet for use in concrete and vinyl floors, balconies or similar areas where pipework is concealed or cast within the slab.
Cast iron body
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
Stainless steel height adjustable assembly with lockable Heelguard grate to suit finished floor level (also available with vinyl floor grate – see table below)
M6 Hex socket screws
S1090R15 shown
M6 Hex head bolt
Cast iron clamp ring
Weep holes to ensure integrity of waterproof membrane
Horizontal floor drains – round grates
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize Ø
Bodysize Ø
Overalldepth
Adjustable grate height WgtkgClamp down Clamp up
Min Max Min Max Min Max
A B C D E 1 E 2
141897 S0590R10 Horizontal floor drain: 50mmØ outlet with 100mmØ grate L15 50 100 149 122 175 42 67 70 95 3.8
141898 S1090R15 Horizontal floor drain: 100mmØ outlet with 150mmØ grate1 L15 100 150 209 179 223 29 51 51 73 10.6
141899 S1090R20 Horizontal floor drain: 100mmØ outlet with 200mmØ grate1 K3 100 200 241 187 249 37 77 59 99 11.6
141900 S1090V14 Horizontal floor drain: 100mmØ outlet with 140mmØ vinyl grate L15 100 140 241 184 221 34 49 56 71 10.5
141901 S1090V18 Horizontal floor drain: 100mmØ outlet with 180mmØ vinyl grate1 K3 100 180 241 186 221 36 49 56 71 11.1
Notes: 1. Strainer baskets available, Part No. 141920 (removable) to suit nominal 100mm diameter see page 31 2. Body and grate assemblies are also sold separately, contact ACO 3. All dimensions are in mm
C
E1
A
D
E2
D
B
With clamp ring facing down
With clamp ring facing up
Plan view
Section view
22 23
www.acowexel.com.au
ACO WEXEL
A short, compact, variable height floor drain with a 90˚ outlet for use in concrete and tiled floors, balconies or similar areas, where pipework is concealed or cast within the slab.
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
Cast iron body
M6 Hex socket screws
S1090S15 shown
M6 Hex head bolt
Stainless steel height adjustable assembly with lockable Heelguard grate to suit finished floor level (grates 150x150mm and larger are hinged)
Cast iron clamp ring
Weep holes to ensure integrity of waterproof membrane
Horizontal floor drains – square grates
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize
Bodysize Ø
Overalldepth
Adjustable grate height WgtkgClamp down Clamp up
Min Max Min Max Min Max
A B C D E 1 E 2
141902 S0590S10 Horizontal floor drain: 50mmØ outlet with 100x100mm grate L15 50 100 149 126 179 46 71 74 99 4.0
141903 S1090S15 Horizontal floor drain: 100mmØ outlet with 150x150mm grate1 L15 100 150 241 184 241 34 70 51 91 11.3
141904 S1090S20 Horizontal floor drain: 100mmØ outlet with 200x200mm grate1 L15 100 200 241 189 249 39 75 59 99 13.1
Notes: 1. Strainer baskets available, Part No. 141920 (removable) to suit nominal 100mm diameter see page 31 2. Body and grate assemblies are also sold separately, contact ACO 3. All dimensions are in mm
C
E1
A
D
E2
D
B
With clamp ring facing down
With clamp ring facing up
Plan view
Section view
24 25
www.acowexel.com.au
Roof drains
A roof drain with sheradised iron grates for conventional run-off collection. Suitable for flat roofs, car parks and similar areas.
Flat grates are for use in applications where traffic is expected. Complies with AS 3996, Clause 3.3.5 Surface openings in pedestrian areas.
Domed grates offer superior inflow in areas with high levels of debris as the dome prevents blockage of slots.
Extension piece to suit finished roof levels. Membrane clamp ring to preserve the integrity of roof waterproofing.
Hot dip galvanised iron grates provide a hard wearing, anti-corrosive finish.
24 25
www.acowexel.com.au
ACO WEXEL
26 27
www.acowexel.com.au
A standard profile roof drain for conventional runoff collection. Suitable for flat roofs, multistorey car parks and similar areas.
Cast iron body
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
Cast iron clamp ring incorporates weep holes to ensure integrity of waterproof membrane
Hot dip galvanised iron lockable grate available in light, heavy and extra heavy duty
Integral puddle flange and weep holes to collect seepage
M12 Hex socket screw
R10PH shown
M6 Hex head bolt
Roof drains – flat grates
Part No. Type DescriptionLoad classEN 1253
Outletsize Ø
Gratesize Ø
Bodysize Ø
Overalldepth
Adjustable grate height
Wgtkg
Min Max Min Max
A B C D E
141905 R10PL Roof drain: 100mmØ outlet with 250mmØ light duty flat grate L15 100 250 320 126 126 N/A N/A 13.2
141906 R10PH Roof drain: 100mmØ outlet with 250mmØ heavy duty flat grate R50 100 250 320 126 126 N/A N/A 14.2
141907 R10PX Roof drain: 100mmØ outlet with 250mmØ extra heavy duty flat grate 1 M125 100 250 320 126 126 N/A N/A 14.9
141908 R15PL Roof drain: 150mmØ outlet with 250mmØ light duty flat grate L15 150 250 320 126 126 N/A N/A 15.1
141909 R15PH Roof drain: 150mmØ outlet with 250mmØ heavy duty flat grate R50 150 250 320 126 126 N/A N/A 16.1
141910 R15PX Roof drain: 150mmØ outlet with 250mmØ extra heavy duty flat grate 1 M125 150 250 320 126 126 N/A N/A 16.9
141911 R10PLE Roof drain: 100mmØ outlet with 250mmØ light duty flat grate with extension L15 100 250 320 166 246 65 118 19.6
141912 R10PHE Roof drain: 100mmØ outlet with 250mmØ heavy duty flat grate with extension R50 100 250 320 191 244 65 118 20.6
141913 R15PLE Roof drain: 150mmØ outlet with 250mmØ light duty flat grate with extension L15 150 250 320 191 244 65 118 21.7
141914 R15PHE Roof drain: 150mmØ outlet with 250mmØ heavy duty flat grate with extension R50 150 250 320 191 244 65 118 22.7
Notes: 1. Membrane clamp ring not available for extra heavy duty grate 2. Body and grate assemblies are also sold separately, contact ACO 3. All dimensions are in mm
C
A
D
D
B
E
Without extension
With extension
Plan view
Section view
26 27
www.acowexel.com.au
ACO WEXEL
A domed profile roof drain for runoff collection where there are high levels of debris. Suitable for flat roofs and similar areas.
Roof drains – domed grates
Part No. Type DescriptionOutletsize Ø
Gratesize Ø
Bodysize Ø
Overalldepth
Adjustable grate height
Dome height
Wgtkg
Min Max Min Max
A B C D E F
141915 R10PD Roof drain: 100mmØ outlet with dome grate 100 234 320 239 239 N/A N/A 113 14.2
141916 R15PD Roof drain: 150mmØ outlet with dome grate 150 234 320 239 239 N/A N/A 113 16.1
141917 R10PDE Roof drain: 100mmØ outlet with dome grate with extension 100 234 320 306 359 65 118 113 20.6
141918 R15PDE Roof drain: 150mmØ outlet with dome grate with extension 150 234 320 306 359 65 118 113 22.5
Notes: 1. Body and grate assemblies are also sold separately, contact ACO 2. All dimensions are in mm
C
A
E
F
D
F
D
B
Without extension
With extension
Plan view
Section view
Hot dip galvanised iron lockable grate for gravel roof or similar areas
Cast iron clamp ring incorporates weep holes to ensure integrity of waterproof membrane
Integral puddle flange and weep holes to collect seepage
M12 Hex socket screw
R10PDE shown
Extension pieceM6 Hex head bolt
Cast iron body
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
28 29
www.acowexel.com.au
Other products and accessories
Planter drain outlet
Planter drain outlets for planter boxes requiring excess drainage.
Strainer baskets
Stainless steel removable (primary) strainer baskets and fixed (secondary) strainers for sediment and trade waste applications.
Clean-out
Solid cover clean-out provides a sealed access point to the plumbing pipe for maintenance and rodding access.
28 29
www.acowexel.com.au
ACO WEXEL
A planter box drain designed to drain excess water from flower boxes or similar areas.
Nitrile rubber seal to allow push in joint connection to agricultural pipe (supplied by others)
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
Cast iron body
M6 Hex head bolt
Cast iron clamp ring
Weep holes to ensure integrity of waterproof membrane
Planter drain outlet
Part No. Type DescriptionOutletsize Ø
Inletsize Ø
Bodysize Ø
Overalldepth
Wgtkg
A B C D
141919 S10PB Planter drain outlet: inlet/outlet size 100mmØ 100 100 209 142 8.3
Notes: 1. All dimensions are in mm
C
A
D
B
Plan view
Section view
30 31
www.acowexel.com.au
Solid cover clean-out provides a sealed access point to the plumbing pipe for maintenance and rodding access. This is useful when pipes are located in areas where usual inspection and rodding are not possible, for example with a fixed (secondary) strainer.
Stainless steel lockable cover assembly
Nitrile rubber seal for push-fit connection to suit PVC and HDPE pipe
Vinyl clamp with M6 Hex socket screws
M6 Hex socket screws
Clean-out
Part No. Type DescriptionLoad classEN 1253
Coversize Ø
Gratesize Ø
Overalldepth
Coverheight
Wgtkg
A B D E
141958 VP1410S Push-in solid top clean-out: 100mmØ outlet with 140mmØ vinyl L15 100 140 65 27 1.3
Notes: 1. All dimensions are in mm
B
A
DE
Plan view
Section view
30 31
www.acowexel.com.au
ACO WEXEL
Most ACO Wexel floor drains are available with a choice of removable (primary) strainer baskets, and some can be fitted with a fixed (secondary) strainer. Refer to product selector on page 4 and notes beneath each parts table (page 10, 11 and 14 to 23).
Removable (primary) strainer basket (Nominal diameter 100mm shown)
Fixed (secondary) strainer
Example of vertical short floor drain with removable (primary) strainer basket
Example of vertical deep floor drain with removable (primary) strainer basket and fixed (secondary) strainer
Strainer baskets
Part No. Type DescriptionBodysize Ø
Overalldepth
Wgtkg
141920 SB100 Removable (primary) strainer for nominal 100mm diameter 100 126 0.1
141923 SB150 Removable (primary) strainer for nominal 150mm diameter 150 74 0.1
141921 SB152 Fixed (secondary) strainer 100 – 0.1
Notes: 1. All dimensions are in mm
32 33
www.acowexel.com.au
Installation guide
Key requirements
Floor and roof drains are plumbing fixtures. They must be trapped, vented and tied to the building sanitary system or stormwater drainage system according to AS 3500.
ACO Wexel comprises stainless steel floor grates, available both with and without cast iron bodies, for either a push-fit or a deep body connection.
The cast iron bodies are available in a number of options:
Adjustable height tops to suit the finished floor level
Clamp rings and puddle flanges to accommodate the waterproof membrane
Bucket traps and other variants
Floor drains – push-fit
The assembly of pipe joints is quick and easy for these units. The outlet is sealed against the inside of the pipe.
Push-fit floor grate
Sealing O-rings
Pipe
1. Make sure that correct O-ring seal is fitted in place on push-in body to suit either PVC or HDPE pipe.
Red O-rings supplied are for HDPE pipe.
Black O-rings supplied are for PVC pipe (see page 8).
2. Make sure the cut end of the pipe is clean and free of burrs and rough edges – this will make fitment easier and eliminate damage to seals during fitment.
3. Apply a light application of lubricant to the seal and the pipe end, making sure mating ends of pipes and fittings are clean and free from contamination.
4. Push-fit body into pipe. Use some rotational movement to right and left as pipes come together.
Floor and roof drains – full bodied
The assembly of these units is quick and easy. The outlet is sealed against the outside of the pipe (see page 12).
Push-in body
Seal
Pipe
1. Make sure the cut end of the pipe is clean and free of burrs and rough edges – this will make fitment easier and eliminate damage to seals during fitment.
2. Apply a light application of lubricant to the seal and the pipe end, making sure mating ends of pipes and fittings are clean and free from contamination.
3. Push-fit body into pipe. Use some rotational movement to right and left as pipes come together.
Bucket trap
A bucket trap is predominantly used for trade waste applications as a means to keep waste products (e.g. food scraps) from entering and blocking the pipe system.
Bucket traps are ACO Wexel’s vertical deep floor drains fitted with fixed and removable strainer baskets.
Removable (primary) strainer
Fixed (secondary) strainer
Clamping membranes
Rolled, flexible material membranes can be secured with bolts through a clamp ring. The clamp ring has a drainage function incorporating weep holes.
Clamp ringMembrane
32 33
www.acowexel.com.au
ACO WEXEL
Grate height adjustments
Adjustable grate assemblies and extension pieces for roof drains can be adjusted to suit a large range of heights. Once fitted, turn either clockwise to lower, or anti-clockwise to raise, until required height is achieved.
Sometimes the unit will need to be cut to achieve the required height.
To cut the unit, use an angle grinder with a cutting disc and cut the riser at the required section between threaded areas. Remove any sharp edges and burrs from cut edges with a file or grinding disc.
Cut units to desired height
Orientation of clamp ring and fine tuning with thread
Changing the clamp ring orientation (down or up) allows for more significant height alterations. Once orientation of the clamp ring is established and fixed in place, install the adjustable grate assembly.
Adjustable grate assemblies have a thread, which allows for easy fine tuning of height adjustment by turning either clockwise to lower, or anti-clockwise to raise, until required height is achieved.
Adjustable grate assembly
Clamp ring facing down
Clamp ring facing up
Floor level
Accommodating vinyl floors
ACO Wexel push-in bodies and grate assemblies have the option to accommodate vinyl flooring by means of a clamping grate and flange. This creates a water tight seal between vinyl floor and clamp. Care must be taken when the vinyl is cut so that it can be securely clamped and not protrude into the open space beneath where it can restrict flow.
34 35
www.acowexel.com.au
Installation illustrations
Push-fit floor drain installed in screed floor
Floor drain – SP1510 shown
Topping screed
Outlet pipe – HDPE or PVC
Concrete slab
Push-fit floor drain installed in vinyl floor
Floor drain – VP1410 shown
Vinyl sheet
Outlet pipe – HDPE or PVC
Concrete slab
Screed/mortar
34 35
www.acowexel.com.au
ACO WEXEL
Full bodied vertical short floor drain installed in tiled floor
Floor drain – S10S15 shown
Glue fixed tile
Outlet pipe – HDPE or PVC
Concrete slab
Waterproof membrane (rolled)
Screed/mortar
Full bodied vertical deep floor drain installed in vinyl floor
Floor drain – D10V14 shown
Vinyl sheet
Outlet pipe – HDPE or PVC
Concrete slab
Waterproof membrane (rolled)
Screed/mortar
36 37
www.acowexel.com.au
Installation illustrations
Full bodied horizontal floor drain installed in tiled floor
Floor drain – S1090S15 shown
Topping screed
Outlet pipe – HDPE or PVC
Concrete slab
Waterproof membrane (rolled)
Push-fit floor drain installed in vinyl floor with puddle flange
Floor drain – VP1410 shown
Vinyl sheet
Concrete slab
Outlet pipe – HDPE or PVC
Puddle flange (supplied by others)
Paintable waterproof membrane
Screed/mortar
36 37
www.acowexel.com.au
ACO WEXEL
Roof drain with flat grate
Roof drain – R10PH shown
Roof membrane
Outlet pipe – HDPE or PVC
Concrete slab
Roof drain with dome grate
Roof drain – R10PDE shown
Topping screed
Outlet pipe – HDPE or PVC
Concrete slab
Paintable waterproof membrane
Screed/mortar
38 3938 39
www.acowexel.com.au
Care and maintenance
Materials
ACO Wexel bodies and clamp rings are manufactured from cast iron, a widely used metal in the drainage industry as it is robust under extreme conditions.
ACO Wexel cast iron components are coated with a high grade lacquer which will eventually wear off to reveal an oxidised surface. Oxidation does not weaken the material.
Floor drain grates are manufactured from stainless steel and offer long term corrosion resistance in most applications.
Roof drain grates are manufactured from hot dip galvanised iron, which provides an extremely hard wearing finish. Seals are manufactured from nitrile rubber.
ACO Wexel roof and floor drains require minimum maintenance when they have been correctly installed. Scheduled inspections should be carried out to ensure that they continue to perform efficiently.
Initial inspection
Once drains have been installed they should be inspected to ensure that all parts are accounted for and correctly fitted. Nuts and bolts need to be tight and secure. Care must be taken around sharp objects (screws etc.) left by other trades, as they may be trodden on. This can cause damage to the surface material and/or waterproof membrane.
Roof drain maintenance
Every flat roof must have an inspection plan. Roof inspections should be carried out on a regular basis, especially in locations where there are nearby trees creating leaf blockage.
Blockages must be cleared immediately to ensure the system does not overflow. Plastic bags will quickly block a drain or grate, whilst airborne grit and fines will silt up gradually and restrict the flow.
Floor drain maintenance
Regular drain cleaning is very important where there is the potential of severe flooding.
Floor drains are an entry point into the sanitary or stormwater drainage system. Waste is often washed down from floors as well as leaves and litter from external pavements. If maintenance is neglected, solid debris will inevitably clog the underlying pipework causing backups.
Drains in commercial kitchens need particular attention, because wastewater generally contains fats, oil and grease.
For applications requiring a more hygienic and durable solution, a stainless steel body and grate is recommended. Refer to the ACO Gully catalogue.
The use of strainer baskets for previously described applications are recommended to prevent debris from reaching pipework and resulting in costly maintenance.
Strainer baskets must be cleaned regularly. Cleaning intervals are determined by the amount of debris present after each cleaning session.
ACO Wexel’s stainless steel floor grates are appropriate for general use in and around buildings including most coastal locations. Clean with soap, warm water rinse and wipe dry. Under no circumstances treat with metal scouring pads, metal scrapers or wire wool as these will contaminate surfaces leaving rust spots.
www.acowexel.com.au
ACO WEXEL
38 3938 39
The table below is based on information gained from material suppliers and published information. Chemical resistance of materials may vary according to the concentration of chemicals used, the presence of other chemicals and other factors such as temperature.
The following information is a general guide only. It is the customer’s responsibility to ensure the suitability of the product for the application. ACO can supply material samples for testing chemical resistance.
ChemicalGrade 304 Stainless
Steel
Cast Iron
Nitrile Seal
Acetate solvent B B DAcetic Acid B D CAcetone A A DAlcohol (Amyl/Butyl) A C AAlcohol (Methyl) A A BAluminium Chloride D D AAluminium Fluoride D – AAluminium Hydroxide A D AAmmonia, Liquids A A BAmmonia, Nitrate A - AAmmonium Carbonate A C DAmmonium Hydroxide A A BAmmonium Nitrate A A AAmmonium Sulphate D C AAmyl Alcohol A – BAntifreeze A B AAsphalt B C BAviation Fuel (JP#, JP4, JP5) A A ABarium Carbonate A B ABarium Chloride D – ABarium Hydroxide C C ABeer A D DBenzene A B DBenzoic Acid A D DBenzol A – DBoric Acid A D AButter B D AButtermilk A D AButyl Acetate – – BCalcium Chloride A C ACalcium Hydroxide A – ACane Juice A A ACarbon Dioxide (wet) A C –Carbonated Water A D AChlorine (Dry) A A –Chlorine Water – D DChocolate Syrup A D ACider A D ACitric Acid A D DCoffee A C ACream A D ADetergents A – ADiesel Fuel A A ADyes A – –Fatty Acids A D CFormic Acid A D DFruit Juice A D AFuel Oils A C AGrape Juice A D AGrease A A AHoney A A AHydraulic Oils (Petroleum) A A AHydrofluoric Acid (100%) D D DHydrogen Peroxide A D DHydrogen Sulfide, Aqueous Solution D D CInk A D A
ChemicalGrade 304 Stainless
Steel
Cast Iron
Nitrile Seal
Lacquers A C DLacquer Thinners – – DLactic Acid A D BLard A A ALime A A ALubricants A – AMash A – AMayonnaise A D AMethyl Acetone – A DMilk A D AMustard A C BOils: Analine A A D Caster A A A Citric A D A Coconut A A A Corn A A A Fuel (1, 2, 3, 5A, 5B, 6) A – B Lemon A – – Mineral A A A Olive A A AOxalic Acid (Cold) A D BParaffin A B APhosphoric Acid (Crude) D D DPetroleum A A APotassium Bromide A D APotassium Carbonate A B BPotassium Chloride A B APotassium Nitrate A – ARust Inhibitors A A ASalad Dressing A D ASea Water A – ASilicone B – ASoap Solutions A B ASodium Hydroxide/Caustic Soda (20%) A A ASodium Hydroxide/Caustic Soda (50%) A B DSodium Hydroxide/Caustic Soda (80%) A C DSodium Hypochlorite (to 20%) C D CSodium Peroxide A D CSoy Sauce A D AStarch A C AStyrene A – DSugar (Liquids) A B ASulphur Dioxide A – DSulphuric Acid (to 10%) D D CSulphuric Acid (10-75%) D D DSulphuric Acid (75-100%) – – DSyrup A – ATomato Juice A C AVegetable Juice A D AVinegar A C CVarnish A – BWater Distilled, Lab Grade 7 A D AWater (Fresh) A B AWater (Salt) A D AWeed Killers A – BXylene A A D
Chemical resistance table
A No effect – excellentB Minor effect – goodC Moderate effect – fairD Severe effect – not recommended– No data available
40
www.acowexel.com.au
ACO Pty Ltd
Head Office:134-140 Old Bathurst RoadEmu Plains NSW 2750
Branches: New South Wales / Australian Capital Territory Victoria / Tasmania South Australia / Northern Territory Queensland Western Australia
Tel: 1300 765 226 +61 2 4747 4000 (International)Fax: +61 2 4747 4040Email: [email protected]: www.acoaus.com.au
© 2017 ACO Pty Ltd. All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products are made without guarantee since the conditions of use are beyond the control of the company. It is the customer’s responsibility to ensure that each product is fit for its intended purpose and that the actual conditions are suitable. ACO Pty Ltd pursues a policy of continuous product development and reserves the right to amend specifications without notice.
ACO Building Drainage Products ACO Building Drainage Products range comprises:
ACO Wexel Cast floor and roof drains
ACO Stainless Industrial stainless steel linear drainage systems
ACO Food Stainless steel drainage systems for food and beverage applications
ACO Gully Stainless steel floor gullies
ACO Pipe Stainless steel push-fit waste pipes
ACO BuildLine Drainage for thresholds, balconies and green roofs
QuARTz by ACO Bathroom linear drains and floor wastes
ACO Passavant Grease separators
Contact ACO for information relating to ACO’s Surface Water Management and Utility Enclosure Solutions.
Follow us on
CA0
032
(201
7:30
00)Quality
ISO 9001
QEC 1883