ace2014p

Premium Quality - Value Price

ACE EnclosuresA

ACE Enclosures

Product overview A Industrial steel enclosures A-1 Junction boxes 1 A-2 Terminal boxes 3 A-3 Bus enclosures 5 A-4 Wall-mounting enclosures VS 9000 7 A-5 Compact free-standing enclosures VS 5000 13 A-6 Panel system enclosures VS8000 19 A-7 Extendable enclosures EP8000 27 A-8 Outdoor enclosures 65 A-9 One-piece consoles 67 A-10 Substation Kiosk enclosures 69 A-11 Customised enclosures 73 A-12 Certifi cates - enclosures 75

B Electrical distribution boards B-1 SPN Consumer units 77 B-2 DIN Rail Distribution Boards 79 B-3 Circuit Breaker Enclosures 81 B-4 Busbar Enclosures 83 B-5 Combination Distribution Boards 85 B-6 Load Centres Distribution Boards IEC Type “B” - DIN mount models 87 B-7 Load Centres Distribution Boards NEMA Type “A” - Plug-in models 91 B-8 Sub Main Distribution Boards 93 B-9 Busbars 99 B-10 Certifi cates - Type tests. 101

C IT enclosures C-1 FlatBox wall-mounted and fl oor-standing enclosure 103 C-2 Wall mount 19” rack, model E1 104 C-3 Two-section wall mount 19” enclosure, model E11 105 C-4 IP65 wall mount 19” enclosures, model E19 106 C-5 IT server fl exi Rack, model E7 107 C-6 Network enclosures and boxes, based on VS7000 108 C-7 Network enclosures, based on EP8000 109 C-8 Klasik rack, model E37 113 C-9 Network Enclosures, based on VS8000 115

D Industrial Storage Equipment D-1 Heavy duty drawer cabinets 121 D-2 Mobile cabinets 123 D-3 Heavy duty work benches 125 D-4 Tooling maintenance trolley 129 D-5 Heavy duty steel cupboards 131 D-6 Panel trolley 133 D-7 Perforated tool panel system 135

As part of our on-going product improvement , ACE Enclosures reserves the right to modify the characteristics or the products described in this document without prior notice and assumes no responsibility for any error which may appear in this publication. The information given is not- contractual. For further details please contact ACE Enclosures, Malaysia. www.ace.net.my

11

A-1 Junction Boxes

• Screw fi xed cover boxes, without gland plate• Cover gasketed with all-round foamed-in PU seal.• Material: Electro galvanised steel, 1.20 mm• Surface fi nish: epoxy powder-coated RAL 7035 texture.• Protection category: IP66 to EN 60 529/09.2000 complies with NEMA 4.


A. Industrial Steel Enclosures

A. Industrial Steel EnclosuresA

2

Selection

External dimensions, mm OrderCode Nr. Height Width Depth Empty Come with M. Plate Come with Din Rail

80 80 45 J89.808045 - - 100 100 55 J89.101055 - - 130 130 60 J89.131360 - - 160 160 65 J89.161665 - - 160 120 65 J89.161265 J89.161265.P - 200 200 90 J89.202090 J89.202090.P - 250 250 100 J89.252510 J89.252510.P - 300 200 110 - - J89.302011.R 300 300 100 J89.303010 J89.303010.P - 400 200 110 - - J89.402011.R 400 400 110 J89.404011 J89.404011.P - 500 200 110 - - J89.502011.R 500 300 110 - - J89.503011.R 600 200 110 - - J89.602011.R 600 300 110 - - J89.603011.R

Junction boxes - J89

3

A-2 Terminal Boxes

• Screw fi xed cover boxes, Cover gasketed with all-round foamed-in PU seal.

• Material: Electro galvanised steel, 1.20 mm. Optional: stainless steel

• Surface fi nish: epoxy powder-coated RAL 7035 texture.

• Protection category: IP66 to EN 60 529/09.2000 complies with NEMA 4.


A Industrial Steel EnclosuresA

4

1. Electro galvanised sheet steel

2. Stainless steel - without gland plate

External dimensions, mm OrderCode Nr. Height Width Depth With gland plate Without gland plate

150 80 - E89.151580 150 120 - E89.151512 200 80 - E89.152080 150 200 120 - E89.152012 300 80 - E89.153080 300 120 E89.153012.GP E89.153012 400 120 - E89.154012 200 80 - E89.202080 200 120 - E89.202012 300 80 - E89.203080 300 120 E89.203012.GP E89.203012 200 400 80 - E89.204080 400 120 E89.204012.GP E89.204012 500 120 E89.205012.GP E89.205012 600 80 - E89.206080 600 120 E89.206012.GP E89.206012 800 120 E89.208012.GP E89.208012 300 120 E89.303012.GP E89.303012 300 400 120 E89.304012.GP E89.304012 500 120 E89.305012.GP E89.305012 600 120 E89.306012.GP E89.306012 400 120 E89.404012.GP E89.404012 400 600 120 E89.406012.GP E89.406012 800 120 E89.408012.GP E89.408012

External dimensions, mm OrderCode Nr. Height Width Depth steel AISI 304 steel ASIS 316L

150 80 E89.151580.304 E89.151580.316 300 80 E89.153080.304 E89.153080.316 200 80 E89.202080.304 E89.202080.316 300 80 E89.203080.304 E89.203080.316 400 120 E89.204012.304 E89.204012.316 300 120 E89.303012.304 E89.303012.316

150

200

300

Terminal Box E89

5

Enclosures have been designed and manufactured with enhanced reliability and quality.

• Enclosures with viewing window made from polycarbonate/ tempered safety glass , 4 mm.

• Cover gasketed with all-round foamed-in PU seal.• Material: Electro galvanised steel, 1.20 mm. • Surface fi nish: powder-coated in texture RAL 7035.• Protection category: IP65 to EN 60 529/09.2000 complies with NEMA 12.

• Supply includes: Door with left/right hinges, 1 cam lock with PA double-bit insert, 2 DIN rail TS 35/7.5


A-3 Bus Enclosures


6

1. Without gland plate

External dimensions, mm Height Width Depth OrderCode Nr. 200 80 E16.302080 300 80 E16.303080 400 80 E16.304080 500 80 E16.305080 300 200 120 E16.302012 400 120 E16.304012 400 150 E16.304015 600 150 E16.306015 800 150 E16.308015

2. With gland plate

External dimensions, mm Height Width Depth OrderCode Nr. 200 400 125 E16.204012.GP 600 125 E16.206012.GP 300 500 125 E16.305012.GP 600 125 E16.306012.GP 500 400 160 E16.504016.GP

E16 with gland plate

7Premium Quality - Value Price

A. Electro galvanised steel

• Door hinge on the right , may be swapped to opposite side.• Door gasketed with all-round foamed-in PU seal and PA double bit insert locks.• Material: Electro galvanised steel. • Mounting plate: Zinc plated.• Surface fi nish: powder-coated RAL 7035 texture. Optional RAL 7032 texture.• Protection category: IP65 to EN 60 529/09.2000 complies with NEMA 4.

A-4 Wall-mounting enclosures VS 9000


8

1. Single leaf door enclosures

Enclosure nominal dimensions, mm OrderCode Nr. Height Width Depth Plain door with Plain door without Glazed door with

GI mounting plate mounting plate GI mounting plate

200 200 150 E9.202015 E9.202015.LP - 200 300 150 E9.203015 E9.203015.LP - 250 200 150 E9.252015 E9.252015.LP - 300 200 150 E9.302015 E9.302015.LP - 300 250 150 E9.302515 E9.302515.LP E19.302515 300 250 200 E9.302520 E9.302520.LP E19.302520 300 300 150 E9.303015 E9.303015.LP E19.303015 300 300 200 E9.303020 E9.303020.LP E19.303020 300 400 200 E9.304020 E9.304020.LP E19.304020 300 450 150 E9.304515 E9.304515.LP E19.304515 400 300 150 E9.403015 E9.403015.LP E19.403015 400 300 200 E9.403020 E9.403020.LP E19.403020 400 400 150 E9.404015 E9.404015.LP E19.404015 400 400 200 E9.404020 E9.404020.LP E19.404020 400 600 250 E9.406025 E9.406025.LP E19.406025 400 600 300 E9.406030 E9.406030.LP E19.406030 500 400 150 E9.504015 E9.504015.LP E19.504015 500 400 200 E9.504020 E9.504020.LP E19.504020 500 400 250 E9.504025 E9.504025.LP E19.504025 600 400 150 E9.604015 E9.604015.LP E19.604015 600 400 200 E9.604020 E9.604020.LP E19.604020 600 400 250 E9.604025 E9.604025.LP E19.604025 600 500 150 E9.605015 E9.605015.LP E19.605015 600 500 200 E9.605020 E9.605020.LP E19.605020 600 500 250 E9.605025 E9.605025.LP E19.605025 600 600 200 E9.606020 E9.606020.LP E19.606020 600 600 250 E9.606025 E9.606025.LP E19.606025 600 600 300 E9.606030 E9.606030.LP E19.606030 600 800 300 E9.608030 E9.608030.LP E19.608030 700 500 200 E9.705020 E9.705020.LP E19.705020 700 500 250 E9.705025 E9.705025.LP E19.705025 800 600 200 E9.806020 E9.806020.LP E19.806020 800 600 250 E9.806025 E9.806025.LP E19.806025 800 600 300 E9.806030 E9.806030.LP E19.806030 800 800 200 E9.808020 E9.808020.LP E19.808020 800 800 250 E9.808025 E9.808025.LP E19.808025 800 800 300 E9.808030 E9.808030.LP E19.808030 1000 600 200 E9.106020 E9.106020.LP E19.106020 1000 600 250 E9.106025 E9.106025.LP E19.106025 1000 600 300 E9.106030 E9.106030.LP E19.106030 1000 800 200 E9.108020 E9.108020.LP E19.108020 1000 800 250 E9.108025 E9.108025.LP E19.108025 1000 800 300 E9.108030 E9.108030.LP E19.108030 1200 800 200 E9.128020 E9.128020.LP E19.128020 1200 800 250 E9.128025 E9.128025.LP E19.128025 1200 800 300 E9.128030 E9.128030.LP E19.128030 1200 1000 250 E9.121025 E9.121025.LP E19.121025 1200 1000 300 E9.121030 E9.121030.LP E19.121030 1400 600 150 E9.146015 E9.146015.LP - 1400 600 200 E9.146020 E9.146020.LP - 1400 600 250 E9.146025 E9.146025.LP - 1400 600 300 E9.146030 E9.146030.LP - 1400 600 350 E9.146035 E9.146035.LP - 1400 600 400 E9.146040 E9.146040.LP - 1400 800 150 E9.148015 E9.148015.LP - 1400 800 200 E9.148020 E9.148020.LP - 1400 800 250 E9.148025 E9.148025.LP - 1400 800 300 E9.148030 E9.148030.LP - 1400 800 350 E9.148035 E9.148035.LP - 1400 800 400 E9.148040 E9.148040.LP - 1400 1000 350 E9.141035 E9.141035.LP - 1400 1000 400 E9.141040 E9.141040.LP -

E9 Single leaf door enclosure

A4 - Wall-mounting enclosures VS 9000

9

cont...Single leaf door enclosures

Enclosure nominal dimensions, mm OrderCode Nr. Height Width Depth Plain door with Plain door without Glazed door with

GI mounting plate mounting plate GI mounting plate

1600 600 150 E9.166015 E9.166015.LP - 1600 600 200 E9.166020 E9.166020.LP - 1600 600 250 E9.166025 E9.166025.LP - 1600 600 300 E9.166030 E9.166030.LP - 1600 600 350 E9.166035 E9.166035.LP - 1600 600 400 E9.166040 E9.166040.LP - 1600 800 150 E9.168015 E9.168015.LP - 1600 800 200 E9.168020 E9.168020.LP - 1600 800 250 E9.168025 E9.168025.LP - 1600 800 300 E9.168030 E9.168030.LP - 1600 800 350 E9.168035 E9.168035.LP - 1600 800 400 E9.168040 E9.168040.LP - 1600 1000 350 E9.161035 E9.161035.LP - 1600 1000 400 E9.161040 E9.161040.LP - 1800 600 150 E9.186015 E9.186015.LP - 1800 600 200 E9.186020 E9.186020.LP - 1800 600 250 E9.186025 E9.186025.LP - 1800 600 300 E9.186030 E9.186030.LP - 1800 600 350 E9.186035 E9.186035.LP - 1800 600 400 E9.186040 E9.186040.LP - 1800 800 150 E9.188015 E9.188015.LP - 1800 800 200 E9.188020 E9.188020.LP - 1800 800 250 E9.188025 E9.188025.LP - 1800 800 300 E9.188030 E9.188030.LP - 1800 800 350 E9.188035 E9.188035.LP - 1800 800 400 E9.188040 E9.188040.LP - 1800 1000 350 E9.181035 E9.181035.LP - 1800 1000 400 E9.181040 E9.181040.LP - 2000 800 300 E9.208030 E9.208030.LP - 2000 800 350 E9.208035 E9.208035.LP - 2000 800 400 E9.208040 E9.208040.LP - 2000 1000 350 E9.201035 E9.201035.LP - 2000 1000 400 E9.201040 E9.201040.LP -

E9 Glazed door enclosure


10

Accessories

2. Overlapping-door enclosures

3 Plinths Material: Electro galvanised steel. Surface fi nish: powder-coated in texture RAL 9002. Optional RAL 7035 texture.

External dimensions, mm OrderCode Nr. Width Depth height H100mm height H200mm 300 E9.12.153 E9.12.253 400 E9.12.154 E9.12.254 300 E9.12.163 E9.12.263 350 E9.12.163V E9.12.263V 400 E9.12.164 E9.12.264 300 E9.12.183 E9.12.283 350 E9.12.183V E9.12.283V 400 E9.12.184 E9.12.284 300 E9.12.103 E9.12.203 350 E9.12.103V E9.12.203V 400 E9.12.104 E9.12.204 300 E9.12.123 E9.12.223 350 E9.12.123V E9.12.223V 400 E9.12.124 E9.12.224

500

600

800

1000

1200

Enclosures of height 1000mm and above are provided with four fl oor mounting holes.

Enclosure dimensions, mm OrderCode Nr. Height Width Depth Plain door with Plain door without

GI mounting plate mounting plate

1200 1000 250 E29.121025 E29.121025.LP 1200 1000 300 E29.121030 E29.121030.LP 1200 1000 350 E29.121035 E29.121035.LP 1200 1000 400 E29.121040 E29.121040.LP 1200 1200 250 E29.121225 E29.121225.LP 1200 1200 300 E29.121230 E29.121230.LP 1200 1200 350 E29.121235 E29.121235.LP 1200 1200 400 E29.121240 E29.121240.LP 1400 1000 250 E29.141025 E29.141025.LP 1400 1000 300 E29.141030 E29.141030.LP 1400 1000 350 E29.141035 E29.141035.LP 1400 1000 400 E29.141040 E29.141040.LP 1400 1200 250 E29.141225 E29.141225.LP 1400 1200 300 E29.141230 E29.141230.LP 1400 1200 350 E29.141235 E29.141235.LP 1400 1200 400 E29.141240 E29.141240.LP 1600 1000 250 E29.161025 E29.161025.LP 1600 1000 300 E29.161030 E29.161030.LP 1600 1000 350 E29.161035 E29.161035.LP 1600 1000 400 E29.161040 E29.161040.LP 1600 1200 250 E29.161225 E29.161225.LP 1600 1200 300 E29.161230 E29.161230.LP 1600 1200 350 E29.161235 E29.161235.LP 1600 1200 400 E29.161240 E29.161240.LP 1800 1000 250 E29.181025 E29.181025.LP 1800 1000 300 E29.181030 E29.181030.LP 1800 1000 350 E29.181035 E29.181035.LP 1800 1000 400 E29.181040 E29.181040.LP 1800 1200 250 E29.181225 E29.181225.LP 1800 1200 300 E29.181230 E29.181230.LP 1800 1200 350 E29.181235 E29.181235.LP 1800 1200 400 E29.181240 E29.181240.LP 2000 1000 350 E29.201035 E29.201035.LP 2000 1000 400 E29.201040 E29.201040.LP 2000 1200 350 E29.201235 E29.201235.LP 2000 1200 400 E29.201240 E29.201240.LP

Plinth E9.12

Overlapping door enclosures

A4 - Wall-mounting enclosures VS 9000

11

4. Rain canopy Material: Electro galvanised steel. Surface fi nish: powder-coated in texture RAL 7035. Optional RAL 7032 texture.

OrderCode Nr.

200

250

300

400

450

500

600

800

1000

1200

External dimensions, mm Width Depth

150 E9.11.2015 150 E9.11.2515 200 E9.11.2520 150 E9.11.3015 200 E9.11.3020 150 E9.11.4015 200 E9.11.4020 250 E9.11.4025 150 E9.11.4515 200 E9.11.4520 150 E9.11.5015 200 E9.11.5020 250 E9.11.5025 300 E9.11.5030 150 E9.11.6015 200 E9.11.6020 250 E9.11.6025 300 E9.11.6030 350 E9.11.6035 400 E9.11.6040 150 E9.11.8015 200 E9.11.8020 250 E9.11.8025 300 E9.11.8030 400 E9.11.8040 250 E9.11.1025 300 E9.11.1030 350 E9.11.1035 400 E9.11.1040 250 E9.11.1225 300 E9.11.1230 350 E9.11.1235 400 E9.11.1240

5. Inner doorMaterial: electro galvanised steel.Surface fi nish: powder-coated in texture RAL 7035.Optional RAL 7032 texture..

Enclosure dimensions, mm OrderCode Nr. Height Width

300 E9.04.4030 300 E9.04.5030 400 E9.04.5040 400 E9.04.6040 500 E9.04.6050 500 E9.04.7050 600 E9.04.8060 800 E9.04.8080 600 E9.04.1060 800 E9.04.1080 800 E9.04.1280 1000 E9.04.1210

400

500

600

700

800

1000

1200

6. Wall mounting bracketsPacks of 4.

Material Steel OrderCode Nr. Zinc passivized E9.10.12

AISI 304 E39.10.12

Rain canopy

Wall mounting brackets

Inner door


12

B Stainless steel 1 Enclosures

Enclosure without gland plate in the base. Door hinge on the right, may be swapped to opposite side.Door gasketed with all-round foamed-in PU seal. Cam lock: Die-cast nickel chrome plated/sus.Material: stainless steel. Mounting plate: Zinc plated.Surface fi nish: Brushed, grain size 240.Protection category: IP65 to EN 60 529/09.2000 complies with NEMA 4x.

2. Rain canopy Material: stainless steel. Surface fi nish: Brushed, grain size 240

200

250

300

400

450

500

600

800

1000

External dimensions, mm OrderCode Nr. Width Depth AISI 304 AISI 316L 150 E39.11.2015 E39.11.2015H 150 E39.11.2515 E39.11.2515H 200 E39.11.2520 E39.11.2520H 150 E39.11.3015 E39.11.3015H 200 E39.11.3020 E39.11.3020H 150 E39.11.4015 E39.11.4015H 200 3E9.11.4020 3E9.11.4020H 250 E39.11.4025 E39.11.4025H 150 E39.11.4515 E39.11.4515H 200 E39.11.4520 E39.11.4520H 150 E39.11.5015 E39.11.5015H 200 E39.11.5020 E39.11.5020H 250 E39.11.5025 E39.11.5025H 300 E39.11.5030 E39.11.5030H 150 E39.11.6015 E39.11.6015H 200 E39.11.6020 E39.11.6020H 250 E39.11.6025 E39.11.6025H 300 E39.11.6030 E39.11.6030H 350 E39.11.6035 E39.11.6035H 150 E39.11.8015 E39.11.8015H 200 E39.11.8020 E39.11.8020H 250 E39.11.8025 E39.11.8025H 300 E39.11.8030 E39.11.8030H 250 E39.11.1025 E39.11.1025H 300 E39.11.1030 E39.11.1030H

3-point closure system

Enclosure nominal dimensions, mm OrderCode Nr. Number Height Width Depth AISI 304 AISI 316L of Locks

300 200 150 E39.302015 E39.302015H 1 300 250 150 E39.302515 E39.302515H 1 300 300 150 E39.303015 E39.303015H 1 400 300 150 E39.403015 E39.403015H 1 400 300 200 E39.403020 E39.403020H 1 400 400 200 E39.404020 E39.404020H 1 400 600 200 E39.406020 E39.406020H 1 500 400 200 E39.504020 E39.504020H 2 600 400 200 E39.604020 E39.604020H 2 600 500 200 E39.605020 E39.605020H 2 600 600 250 E39.606025 E39.606025H 2 700 500 250 E39.705025 E39.705025H 2 800 600 200 E39.806020 E39.806020H 2 800 600 250 E39.806025 E39.806025H 2 800 800 300 E39.808030 E39.808030H 2 1000 800 300 E39.108030 E39.108030H 2 1200 800 300 E39.128030 E39.128030H 2 1000 1000 300 E39.101030-2D E39.101030H-2D 1200 1000 300 E39.121030-2D E39.121030H-2D

E39 - Stainless steel Enclosures

Rain Canopy

VS9000 Certifi cate


A-5 Compact free-standing enclosures VS 5000

• Enclosure with gland plate in the base. • Door hinge on the right, may be swapped to opposite side.• Door gasketed all-round foamed-in PU seal and mounted with

double bit PA insert lock.• Material: Electro galvanised steel. • Mounting plate: Zinc plated.• Surface fi nish: powder-coated in texture RAL 7035. Optional

RAL 7032 texture.• Protection category: IP55 to EN 60 529/09.2000 complies

with NEMA 12.


14


1000

1200

1400

1600

1800

2000

Enclosure dimensions, mm OrderCode Nr. Height Width Depth Plain door with Plain door without Glazed door without GI mounting plate mounting plate mounting plate

600 300 E5.106030P E5.106030 - 600 400 E5.106040P E5.106040 - 800 300 E5.108030P E5.108030 - 800 400 E5.108040P E5.108040 - 600 300 E5.126030P E5.126030 - 600 400 E5.126040P E5.126040 - 800 300 E5.128030P E5.128030 - 800 400 E5.128040P E5.128040 - 1000 400 E5.121040P E5.121040 - 600 300 E5.146030P E5.146030 - 600 400 E5.146040P E5.146040 - 800 300 E5.148030P E5.148030 - 800 400 E5.148040P E5.148040 E15.148040 1000 400 E5.141040P E5.141040 - 600 300 E5.166030P E5.166030 - 600 400 E5.166040P E5.166040 E15.166040 600 500 E5.166050P E5.166050 - 800 300 E5.168030P E5.168030 E15.168030 800 400 E5.168040P E5.168040 E15.168040 800 500 E5.168050P E5.168050 - 1000 400 E5.161040P E5.161040 - 600 300 E5.186030P E5.186030 - 600 400 E5.186040P E5.186040 E15.186040 600 500 E5.186050P E5.186050 - 800 300 E5.188030P E5.188030 E15.188030 800 400 E5.188040P E5.188040 E15.188040 800 500 E5.188050P E5.188050 E15.188050 800 600 E5.188060P E5.188060 - 1000 400 E5.181040P E5.181040 - 600 300 E5.206030P E5.206030 - 600 400 E5.206040P E5.206040 E15.206040 600 500 E5.206050P E5.206050 - 800 300 E5.208030P E5.208030 E15.208030 800 400 E5.208040P E5.208040 E15.208040 800 500 E5.208050P E5.208050 E15.208050 800 600 E5.208060P E5.208060 E15.208060 1000 400 E5.201040P E5.201040 - 1000 500 E5.201050P E5.201050 -

2. Overlapping door enclosures

1200

1400

1600

1800

2000

Enclosure dimensions, mm OrderCode Nr. Height Width Depth Plain door with Plain door without

GI mounting plate mounting plate

1000 300 E5.121030P-2D E5.121030-2D 1200 400 E5.121040P-2D E5.121040-2D 1000 400 E5.141040P-2D E5.141040-2D 1200 400 E5.141240P-2D E5.141240-2D 1000 300 E5.161030P-2D E5.161030-2D 1000 400 E5.161040P-2D E5.161040-2D 1200 300 E5.161230P-2D E5.161230-2D 1200 400 E5.161240P-2D E5.161240-2D 1000 400 E5.181040P-2D E5.181040-2D 1000 500 E5.181050P-2D E5.181050-2D 1200 400 E5.181240P-2D E5.181240-2D 1200 500 E5.181250P-2D E5.181250-2D 1600 400 E5.181640P-2D E5.181640-2D 1600 500 E5.181650P-2D E5.181650-2D 1000 400 E5.201040P-2D E5.201040-2D 1000 500 E5.201050P-2D E5.201050-2D 1200 400 E5.201240P-2D E5.201240-2D 1200 500 E5.201250P-2D E5.201250-2D 1200 600 E5.201260P-2D E5.201260-2D 1600 400 E5.201640P-2D E5.201640-2D 1600 500 E5.201650P-2D E5.201650-2D 1600 600 E5.201660P-2D E5.201660-2D

Single leaf door enclosures


A5 - Compact free-standing enclosures VS 5000

15

4. Plinths Material: Electro galvanised steel. Surface fi nish: powder-coated in texture RAL 9002. Optional RAL 7035 texture.

3. Rain canopy Material: Electro galvanised steel. Surface fi nish: powder-coated in texture RAL 7035. Optional RAL 7032 texture.

Accessories

Enclosure dimensions, mm Width Depth

300 E5.25.063 400 E5.25.064 500 E5.25.065 300 E5.25.083 400 E5.25.084 500 E5.25.085 300 E5.25.103 400 E5.25.104 500 E5.25.105 300 E5.25.123 400 E5.25.124 500 E5.25.125

OrderCode Nr.

600

800

1000

1200

Enclosure dimensions, mm OrderCode Nr. Width Depth height H100mm height H200mm 300 E5.04.1063 E5.04.2063 600 400 E5.04.1064 E5.04.2064 500 E5.04.1065 E5.04.2065 300 E5.04.1083 E5.04.2083 800 400 E5.04.1084 E5.04.2084 500 E5.04.1085 E5.04.2085 300 E5.04.1103 E5.04.2103 1000 400 E5.04.1104 E5.04.2104 500 E5.04.1105 E5.04.2105 300 E5.04.1123 E5.04.2123 1200 400 E5.04.1124 E5.04.2124 500 E5.04.1125 E5.04.2125 400 E5.04.1164 E5.04.2164 1600 500 E5.04.1165 E5.04.2165 600 E5.04.1166 E5.04.2166

Enclosure dimensions, mm Height Width

600 E5.36.1006 800 E5.36.1008 600 E5.36.1206 800 E5.36.1208 1000 E5.36.1210 600 E5.36.1406 800 E5.36.1408 1000 E5.36.1410 600 E5.36.1606 800 E5.36.1608 1000 E5.36.1610 1200 E5.36.1612 600 E5.36.1806 800 E5.36.1808 1000 E5.36.1810 1200 E5.36.1812 600 E5.36.2006 800 E5.36.2008 1000 E5.36.2010 1200 E5.36.2012

OrderCode Nr.

1000

1200

1400

1600

1800

2000

5. GI mounting plateSupplies include mounting brackets.

Plinths

Rain canopy

GI mounting plate


16

Enclosure Height, mm OrderCode Nr. 1000 E5.43.1000 1200 E5.43.1200 1400 E5.43.1400 1600 E5.43.1600 1800 E5.43.1800 2000 E5.43.2000

6. Vertical uprightsMaterial: zinc passivated steel. Packs of 2.

7. 19” swing frameMaterial: Electro galvanised steel. Surface fi nish: powder-coated in texture RAL 7035. Optional RAL 7032 texture.

Enclosure dimensions, mm OrderCode Nr. Height Width Off-centre Centred 1200 800 E5.76.1281 E5.76.1282 1400 800 E5.76.1481 E5.76.1482 1600 800 E5.76.1681 E5.76.1682 1800 800 E5.76.1881 E5.76.1882 2000 800 E5.76.2081 E5.76.2082 2200 800 E5.76.2281 E5.76.2282

19” swing frame

Vertical uprights

A5 - Compact free-standing enclosures VS 5000

17

8. 19” fi xed frameMaterial: Electro galvanised steel. Surface fi nish: powder-coated in texture RAL 7035. Optional RAL 7032 texture.

9. Inner doorMaterial: electro galvanised steel.Surface fi nish: powder-coated in texture RAL 7035.Optional RAL 7032 texture..


600 E5.66.1260 800 E5.66.1280 600 E5.66.1460 800 E5.66.1480 600 E5.66.1660 800 E5.66.1680 600 E5.66.1860 800 E5.66.1880 600 E5.66.2060 800 E5.66.2080

1200

1400

1600

1800

2000


600 E5.08.1206 800 E5.08.1208 600 E5.08.1406 800 E5.08.1408 1000 E5.08.1410 600 E5.08.1606 800 E5.08.1608 1000 E5.08.1610 600 E5.08.1806 800 E5.08.1808 1000 E5.08.1810 600 E5.08.2006 800 E5.08.2008 1000 E5.08.2010

1200

1400

1600

1800

2000

Inner door

19” fi xed frame


18

10. Door retainerHolds the door open at 120 degree to avoid accidental closing.Supplied with fastenersPacks of 1 set.

OrderCode Nr. E8.35.0

Door retainer

View of Door retainer in use.

A6 - Panel System Enclosures VS 8000


A-6 Panel system enclosures VS8000

• Every enclosure is accessible from all sides.• When used in conjunction with the system accessories, it offers endless possibilities.• Enclosure welded frame sections are slotted on a 25mm pitch pattern.• Door and panels are gasketed with all-round foamed-in PU seal.• Material: Electro galvanised steel. • Mounting plate: Zinc plated.• Surface fi nish: powder-coated in texture RAL 7035. Optional RAL 7032 texture.• Protection category: IP55 to EN 60 529/09.2000 complies with NEMA 12.• Supply includes: Enclosure welded frame with depth profi les, doors/rear panel,

mounting plate ( optional ), gland plates and roof panel.


20


Enclosure dimensions, mm OrderCode Nr. supply excludes GIP mounting plate

Height Width Depth Plain front door and Plain front and rear panel enclosure rear doors enclosure

600 400 E8.1264 E8.1264-RD 600 500 E8.1265 E8.1265-RD 800 400 E8.1284 E8.1284-RD 800 500 E8.1285 E8.1285-RD 600 400 E8.1464 E8.1464-RD 600 500 E8.1465 E8.1465-RD 800 500 E8.1485 E8.1485-RD 600 500 E8.1665 E8.1665-RD 600 600 E8.1666 E8.1666-RD 600 800 E8.1668 E8.1668-RD 800 500 E8.1685 E8.1685-RD 800 600 E8.1686 E8.1686-RD 800 800 E8.1688 E8.1688-RD 400 400 E8.1844 E8.1844-RD 400 500 E8.1845 E8.1845-RD 400 600 E8.1846 E8.1846-RD 600 400 E8.1864 E8.1864-RD 600 500 E8.1865 E8.1865-RD 600 600 E8.1866 E8.1866-RD 600 800 E8.1868 E8.1868-RD 800 400 E8.1884 E8.1884-RD 800 500 E8.1885 E8.1885-RD 800 600 E8.1886 E8.1886-RD 1000 400 E8.1804 E8.1804-RD 1000 500 E8.1805 E8.1805-RD 1000 600 E8.1806 E8.1806-RD 600 400 E8.2064 E8.2064-RD 600 500 E8.2065 E8.2065-RD 600 600 E8.2066 E8.2066-RD 600 800 E8.2068 E8.2068-RD 800 400 E8.2084 E8.2084-RD 800 500 E8.2085 E8.2085-RD 800 600 E8.2086 E8.2086-RD 800 800 E8.2088 E8.2088-RD 1000 400 E8.2004 E8.2004-RD 1000 500 E8.2005 E8.2005-RD 1000 600 E8.2006 E8.2006-RD 1000 800 E8.2008 E8.2008-RD 600 600 E8.2266 E8.2266-RD 600 800 E8.2268 E8.2268-RD 800 600 E8.2286 E8.2286-RD 800 800 E8.2288 E8.2288-RD 1000 600 E8.2206 E8.2206-RD

1200

1400

1600

1800

2000

2200

Single leaf door enclosures

Transparent Door enclosures


21

Enclosure dimensions, mm OrderCode Nr. supply excludes GIP mounting plate

Height Width Depth Plain front door and Plain front and rear panel enclosure rear doors enclosure

1200 500 E8.1625-2D E8.1625-2DRD 800 500 E8.1885-2D E8.1885-2DRD 800 600 E8.1886-2D E8.1886-2DRD 1000 400 E8.1804-2D E8.1804-2DRD 1000 500 E8.1805-2D E8.1805-2DRD 1000 600 E8.1806-2D E8.1806-2DRD 1200 400 E8.1824-2D E8.1824-2DRD 1200 500 E8.1825-2D E8.1825-2DRD 1200 600 E8.1826-2D E8.1826-2DRD 800 600 E8.2086-2D E8.2086-2DRD 1000 400 E8.2004-2D E8.2004-2DRD 1000 500 E8.2005-2D E8.2005-2DRD 1000 600 E8.2006-2D E8.2006-2DRD 1000 800 E8.2008-2D E8.2008-2DRD 1200 400 E8.2024-2D E8.2024-2DRD 1200 500 E8.2025-2D E8.2025-2DRD 1200 600 E8.2026-2D E8.2026-2DRD 1200 800 E8.2028-2D E8.2028-2DRD 1600 400 E8.20164P-2D E8.20164-2DRD 1600 500 E8.20165-2D E8.20165-2DRD 1600 600 E8.20166-2D E8.20166-2DRD 1000 600 E8.2206-2D E8.2206-2DRD 1000 800 E8.2208-2D E8.2208-2DRD 1200 600 E8.2226-2D E8.2226-2DRD 1200 800 E8.2228-2D E8.2228-2DRD

1600

1800

2000

2200

2. Overlapping door enclosures

1800

2000

2200

Enclosure dimensions, mm OrderCode Nr. supply excludes GIP mounting plate Height Width Depth centre cut-out offset cut-out centre cut-out offset cut-out transparent front door transparent front door transparent front door & transparent front door & & rear panel enclosure & rear panel enclosure rear plain door enclosure rear plain door enclosure

600 400 E78.1864 - E78.1864-RD - 600 500 E78.1865 - E78.1865-RD - 600 600 E78.1866 - E78.1866-RD - 600 800 E78.1868 - E78.1868-RD - 800 400 E78.1884 E78.1884.S E78.1884-RD E78.1884.S-RD 800 500 E78.1885 E78.1885.S E78.1885-RD E78.1885.S-RD 800 600 E78.1886 E78.1886.S E78.1886-RD E78.1886.S-RD 800 400 E78.2084 E78.2084.S E78.2084-RD E78.2084.S-RD 800 500 E78.2085 E78.2085.S E78.2085-RD E78.2085.S-RD 800 600 E78.2086 E78.2086.S E78.2086-RD E78.2086.S-RD 800 800 E78.2088 E78.2088.S E78.2088-RD E78.2088.S-RD 600 600 E78.2266 - E78.2066-RD - 600 800 E78.2268 - E78.2068-RD - 800 600 E78.2286 E78.2286.S E78.2086-RD E78.2086.S-RD 800 800 E78.2288 E78.2288.S E78.2088-RD E78.2088.S-RD 600 600 E78.2266 - E78.2266-RD - 600 800 E78.2268 - E78.2268-RD - 800 600 E78.2286 E78.2286.S E78.2286-RD E78.2286.S-RD 800 800 E78.2288 E78.2288.S E78.2288-RD E78.2288.S-RD

3. Transparent Door enclosuresSupply includes: Enclosure welded frame with depth profi les, transparent front door, gland plates, rear plain door / panel and roof panel.



22

5. Lifting Eyebolt -M12 Packs of 4.

6. Lifting angle bracketsPacks of 4.

7. Plinths Material: Electro galvanised steel. Surface fi nish: powder-coated in texture RAL 9002. Optional RAL 7035 texture.

600

800

1000

1200

Enclosure dimensions, mm OrderCode Nr. Width Depth height H100mm height H200mm 400 E8.04.1064 E8.04.2064 500 E8.04.1065 E8.04.2065 600 E8.04.1066 E8.04.2066 800 E8.04.1068 E8.04.2068 500 E8.04.1085 E8.04.2085 600 E8.04.1086 E8.04.2086 800 E8.04.1088 E8.04.2088 400 E8.04.1104 E8.04.2104 500 E8.04.1105 E8.04.2105 600 E8.04.1106 E8.04.2106 800 E8.04.1108 E8.04.2108 400 E8.04.1124 E8.04.2124 500 E8.04.1125 E8.04.2125 600 E8.04.1126 E8.04.2126 800 E8.04.1128 E8.04.2128

4. Side panelsMaterial: Electro galvanised steel. Surface fi nish: powder-coated in texture RAL 7035. Optional RAL 7032 texture.Packs of 2.



B. Accessories

Enclosure dimensions, mm OrderCode Nr. Height Depth

400 E8.01.124 500 E8.01.125 400 E8.01.144 500 E8.01.145 500 E8.01.165 600 E8.01.166 800 E8.01.168 400 E8.01.184 500 E8.01.185 600 E8.01.186 800 E8.01.188 400 E8.01.204 500 E8.01.205 600 E8.01.206 800 E8.01.208 600 E8.01.226 800 E8.01.228

1200

1400

1600

1800

2000

2200

Lifting Eyebolt -M12

Lifting angle brackets

Plinths

Side panels


23

8. GI mounting plateincluding mounting bracketsPacks of 1.

9. 19” swing framesMaterial: electro galvanised steel.Supplied with fi xing accessories.Packs of 1 set.


600 E8.36.1206 800 E8.36.1208 600 E8.36.1406 800 E8.36.1408 600 E8.36.1606 800 E8.36.1608 1000 E8.36.1610 1200 E8.36.1612 600 E8.36.1806 800 E8.36.1808 1000 E8.36.1810 1200 E8.36.1812 600 E8.36.2006 800 E8.36.2008 1000 E8.36.2010 1200 E8.36.2012 600 E8.36.2206 800 E8.36.2208 1000 E8.36.2210 1200 E8.36.2212

1200

1400

1600

1800

2000

2200

800

For enclosure OrderCode Nr. Height, mm Width, mm installed centre installed offset 1600 E8.76.1682 E8.76.1681 1800 E8.76.1882 E8.76.1881 2000 E8.76.2082 E8.76.2081 2200 E8.76.2282 E8.76.2281

10. 19” fi xed framesMaterial: electro galvanised steel.Supplied with fi xing accessories.Packs of 1 set.

1600

1800

2000

2200

For enclosure OrderCode Nr. Height, mm Width, mm Installed centre

600 E8.38.1660 800 E8.38.1680 600 E8.38.1860 800 E8.38.1880 600 E8.38.2060 800 E8.38.2080 600 E8.38.2260 800 E8.38.2280

19” swing frames 19” fi xed frames

GI mounting plate


24

13. Side divider panels- plainMaterial: zincpassivated steel.Packs of 1.

12. Internal doorMaterial: electro galvanised steel.Supplied with fi xing accessories.Packs of 1 set.

1600

1800

2000

2200

For enclosure OrderCode Nr. Height, mm Width, mm

600 E8.08.1606 800 E8.08.1608 600 E8.08.1806 800 E8.08.1808 600 E8.08.2006 800 E8.08.2008 600 E8.08.2206 800 E8.08.2208

For enclosure OrderCode Nr. Height, mm Depth, mm

500 E8.34.165 1600 600 E8.34.166 800 E8.34.168 500 E8.34.185 1800 600 E8.34.186 800 E8.34.188 500 E8.34.205 2000 600 E8.34.206 800 E8.34.208 500 E8.34.225 2200 600 E8.34.226 800 E8.34.228

11. 19” panelsMaterial: electro galvanised steel.Packs of 4..

Panel OrderCode Nr. U height Plain Vented

1 E4.910.0 E4.910.1 1.5 E4.915.0 E4.915.1 2 E4.920.0 E4.920.1 3 E4.930.0 E4.930.1 4 E4.940.0 E4.940.1 5 E4.950.0 E4.950.1

Internal door

Side divider panels- plain

19” panels


25

14. Enclosure baying kitsMaterial: zinc passivated steel.Supplied with fi xing accessories.Packs of 1 set.

16. Door retainerHolds the door open at 120 degree to avoid accidental closing.Supplied with fastenersPacks of 1 set.

17. Door switch c/w mounting bracketsPacks of 1 set.

18. Compact fl uorescent lamp, 220V/50Hz,60Wc/w switch and mounting bracketsPacks of 1 set.

15. Metal document pockets, mount to the door stiffenersMaterial: electro galvanised steel.Supplied with fastenersPacks of 1 set.

For enclosure door OrderCode Nr. Width, mm

500 E8.34.500 600 E8.34.600 700 E8.34.700 800 E8.34.800


OrderCode Nr. DS-230V

OrderCode Nr. LAMP 68


19. Spray touch-up paint Aerosol can

Colour OrderCode Nr. RAL 7032 SC-7032 RAL 7035 SC-7035

Spray touch-up paint

Compact fl uorescent lamp, 220V/50Hz,60W

Door switch

Door retainer

Metal document pockets , mount to the door stiffeners

Enclosure baying kits


26

22 Punched section 25x25 mm without mounting fl angeMaterial: zincpassivated steel.Packs of 4, with support brackets

21 Punched section 25x75 mm without mounting fl angeMaterial: zincpassivated steel.Packs of 4, with support brackets.

For enclosure OrderCode Nr. Height / Width / Depth, mm Height, mm Width, mm Depth, mm

400 - - E8.62.7504 500 - - E8.62.7505 600 - E8.61.7506 E8.62.7506 800 - E8.61.7508 E8.62.7508 1000 - E8.61.7510 - 1200 E8.63.7512 E8.61.7512 - 1400 E8.63.7514 - - 1600 E8.63.7516 - - 1800 E8.63.7518 - - 2000 E8.63.7520 - - 2200 E8.63.7522 - -

For enclosure OrderCode Nr. Height / Width / Depth, mm Height, mm Width, mm Depth, mm

400 - - E8.62.2504 500 - - E8.62.2505 600 - E8.61.2506 E8.62.2506 800 - E8.61.2508 E8.62.2508 1000 E8.63.2510 E8.61.2510 - 1200 E8.63.2512 E8.61.2512 - 1400 E8.63.2514 - - 1600 E8.63.2516 - - 1800 E8.63.2518 - - 2000 E8.63.2520 - - 2200 E8.63.2522 - -

20. Punched section 25x75 mm with mounting fl angesMaterial: zincpassivated steel.Packs of 4.

For enclosure OrderCode Nr. Width/Depth, mm Width, mm Depth, mm

500 - E8.65.05 600 E8.64.06 E8.65.06 800 E8.64.08 E8.65.08 1000 E8.64.10 E8.64.10 1200 E8.64.12 -

Punched section 25x75 mm without mounting fl ange


27

Enclosures have been designed and manufactured with enhanced reliability and quality.

• kit set assembly modular design• the eight folds profi les of the frame elements provide substantial torque resistance• complies with international standards• tested according to these standards• manufactured in ISO certifi ed facilities• guaranteed fl exibility and quick assembly• guaranteed by a world-class enclosure manufacturer • offer an appropriate solution for the central link represented by the low voltage switchgear application and installation


Characteristics - Mechanical ; The enclosure range may be used to build switchboards of various depths and widths by combining basic frames and extensions.

• Forms: 1 - 2b - 3b - 4b • Degree of protection: IP55 • Dimensions: Overall height - 2200, 2000, 1800 and 1600 mm

Width - 300, 400, 500, 600, 700, 800, 900, 1000, 1100,1200,1300 and 1400 mm. Depth - 400, 500, 600, 700, 800, 900 and 1000 mm • Functional height / width / depth - modules of 50 mm • Material: Electro galvanised and zincpassivated steel sheets• Finish: Painted with epoxy-polyester resin,

textured RAL 7035. Optional - RAL 7032 textured

Basic frame : The basic frame of the enclosure unit is an assembly of prefabricated elements. These elements are available in a number of sizes and may be assembled to form columns of different volumes.

Each column is made up of four distinct zones : 1. Busbars. 2. Switchgear components.3. Cable connections.4. Auxiliaries.

A-7 Extendable Enclosures EP 8000


28

Layout of the columns:

The modular design makes it possible to match the switchboard layout to the confi guration of the electrical room.

• columns may be positioned side-by-side or back-to-back or cornered.

• access to connection zones is possible through the front or back of each column.

• if the connection terminals are located behind switchgear components, access is through the rear of column.

• incoming or outgoing cables may enter through the top or bottom of columns.

• the switchboard may also be supplied by bus ways through the top of the column.

The arrangement is of Endless Possibilities.

A7 - Extendable Enclosures EP 8000

29


30

3131

Flat pack component kits A-7 Extendable Enclosures EP 8000


3232

1. Selection : Flat pack component kits

Enclosure dimensions, mm OrderCode Nr. Height Width Depth Number Vertical Vertical Top and bottom Top and bottom Roof panel Plain door and Side panels Mounting plate of doors uprights-standard uprights- extended frame-standard frame-extended rear panel set (pack of 2) and brackets

600

800

600

800

600

800

400

600

800

1000

1200

300

400

600

800

1000

1200

1400

1600

1800

2000

400 1 6.01.1200 6.01.1200E 6.02.6040 6.02.6040E 6.04.6040 6.05.1260 6.11.1240 6.31.1260500 1 6.01.1200 6.01.1200E 6.02.6050 6.02.6050E 6.04.6050 6.05.1260 6.11.1250 6.31.1260600 1 6.01.1200 6.01.1200E 6.02.6060 6.02.6060E 6.04.6060 6.05.1260 6.11.1260 6.31.1260800 1 6.01.1200 6.01.1200E 6.02.6080 6.02.6080E 6.04.6080 6.05.1260 6.11.1280 6.31.1260400 1 6.01.1200 6.01.1200E 6.02.8040 6.02.8040E 6.04.8040 6.05.1280 6.11.1240 6.31.1280500 1 6.01.1200 6.01.1200E 6.02.8050 6.02.8050E 6.04.8050 6.05.1280 6.11.1250 6.31.1280600 1 6.01.1200 6.01.1200E 6.02.8060 6.02.8060E 6.04.8060 6.05.1280 6.11.1260 6.31.1280800 1 6.01.1200 6.01.1200E 6.02.8080 6.02.8080E 6.04.8080 6.05.1280 6.11.1280 6.31.1280400 1 6.01.1400 6.01.1400E 6.02.6040 6.02.8040E 6.04.6040 6.05.1460 6.11.1440 6.31.1460500 1 6.01.1400 6.01.1400E 6.02.6050 6.02.8040E 6.04.6050 6.05.1460 6.11.1450 6.31.1460600 1 6.01.1400 6.01.1400E 6.02.6060 6.02.8040E 6.04.6060 6.05.1460 6.11.1460 6.31.1460800 1 6.01.1400 6.01.1400E 6.02.6080 6.02.8040E 6.04.6080 6.05.1460 6.11.1480 6.31.1460400 1 6.01.1400 6.01.1400E 6.02.8040 6.02.8040E 6.04.8040 6.05.1480 6.11.1440 6.31.1480500 1 6.01.1400 6.01.1400E 6.02.8050 6.02.8050E 6.04.8050 6.05.1480 6.11.1450 6.31.1480600 1 6.01.1400 6.01.1400E 6.02.8060 6.02.8060E 6.04.8060 6.05.1480 6.11.1460 6.31.1480800 1 6.01.1400 6.01.1400E 6.02.8080 6.02.8080E 6.04.8080 6.05.1480 6.11.1480 6.31.1480400 1 6.01.1600 6.01.1600E 6.02.6040 6.02.6040E 6.04.6040 6.05.1660 6.11.1640 6.31.1660500 1 6.01.1600 6.01.1600E 6.02.6050 6.02.6050E 6.04.6050 6.05.1660 6.11.1650 6.31.1660600 1 6.01.1600 6.01.1600E 6.02.6060 6.02.6060E 6.04.6060 6.05.1660 6.11.1660 6.31.1660800 1 6.01.1600 6.01.1600E 6.02.6080 6.02.6080E 6.04.6080 6.05.1660 6.11.1680 6.31.1660400 1 6.01.1600 6.01.1600E 6.02.8040 6.02.8040E 6.04.8040 6.05.1680 6.11.1640 6.31.1680500 1 6.01.1600 6.01.1600E 6.02.8050 6.02.8050E 6.04.8050 6.05.1680 6.11.1650 6.31.1680600 1 6.01.1600 6.01.1600E 6.02.8060 6.02.8060E 6.04.8060 6.05.1680 6.11.1660 6.31.1680800 1 6.01.1600 6.01.1600E 6.02.8080 6.02.8080E 6.04.8080 6.05.1680 6.11.1680 6.31.1680400 1 6.01.1800 6.01.1800E 6.02.4040 6.02.4040E 6.04.4040 6.05.1840 6.11.1840 -500 1 6.01.1800 6.01.1800E 6.02.4050 6.02.4050E 6.04.4050 6.05.1840 6.11.1850 -600 1 6.01.1800 6.01.1800E 6.02.4060 6.02.4060E 6.04.4060 6.05.1840 6.11.1860 -800 1 6.01.1800 6.01.1800E 6.02.4080 6.02.4080E 6.04.4080 6.05.1840 6.11.1880 -400 1 6.01.1800 6.01.1800E 6.02.6040 6.02.6040E 6.04.6040 6.05.1860 6.11.1840 6.31.1860500 1 6.01.1800 6.01.1800E 6.02.6050 6.02.6050E 6.04.6050 6.05.1860 6.11.1850 6.31.1860600 1 6.01.1800 6.01.1800E 6.02.6060 6.02.6060E 6.04.6060 6.05.1860 6.11.1860 6.31.1860800 1 6.01.1800 6.01.1800E 6.02.6080 6.02.6080E 6.04.6080 6.05.1860 6.11.1880 6.31.1860400 1 6.01.1800 6.01.1800E 6.02.8040 6.02.8040E 6.04.8040 6.05.1880 6.11.1840 6.31.1880500 1 6.01.1800 6.01.1800E 6.02.8050 6.02.8050E 6.04.8050 6.05.1880 6.11.1850 6.31.1880600 2 6.01.1800 6.01.1800E 6.02.8060 6.02.8060E 6.04.8060 6.05.1880-2D 6.11.1860 6.31.1880800 1 6.01.1800 6.01.1800E 6.02.8080 6.02.8080E 6.04.8080 6.05.1880 6.11.1880 6.31.1880800 2 6.01.1800 6.01.1800E 6.02.8080 6.02.8080E 6.04.8080 6.05.1880-2D 6.11.1880 6.31.1880400 1 6.01.1800 6.01.1800E 6.02.1040 6.02.1040E 6.04.1040 6.05.1810 6.11.1840 6.31.1810400 2 6.01.1800 6.01.1800E 6.02.1040 6.02.1040E 6.04.1040 6.05.1810-2D 6.11.1840 6.31.1810500 1 6.01.1800 6.01.1800E 6.02.1050 6.02.1050E 6.04.1050 6.05.1810 6.11.1850 6.31.1810600 1 6.01.1800 6.01.1800E 6.02.1060 6.02.1060E 6.04.1060 6.05.1810 6.11.1860 6.31.1810600 2 6.01.1800 6.01.1800E 6.02.1060 6.02.1060E 6.04.1060 6.05.1810-2D 6.11.1860 6.31.1810800 1 6.01.1800 6.01.1800E 6.02.1080 6.02.1080E 6.04.1080 6.05.1810 6.11.1880 6.31.1810800 2 6.01.1800 6.01.1800E 6.02.1080 6.02.1080E 6.04.1080 6.05.1810-2D 6.11.1880 6.31.1810400 2 6.01.1800 6.01.1800E 6.02.1240 6.02.1240E 6.04.1240 6.05.1812-2D 6.11.1840 6.31.1812500 2 6.01.1800 6.01.1800E 6.02.1250 6.02.1250E 6.04.1250 6.05.1812-2D 6.11.1850 6.31.1812600 2 6.01.1800 6.01.1800E 6.02.1260 6.02.1260E 6.04.1260 6.05.1812-2D 6.11.1860 6.31.1812800 2 6.01.1800 6.01.1800E 6.02.1280 6.02.1280E 6.04.1280 6.05.1812-2D 6.11.1880 6.31.1812500 1 6.01.2000 6.01.2000E 6.02.3050 6.02.3050E 6.04.3050 6.05.2030 6.11.2050 -600 1 6.01.2000 6.01.2000E 6.02.3060 6.02.3060E 6.04.3060 6.05.2030 6.11.2060 -400 1 6.01.2000 6.01.2000E 6.02.4040 6.02.4040E 6.04.4040 6.05.2040 6.11.2040 -500 1 6.01.2000 6.01.2000E 6.02.4050 6.02.4050E 6.04.4050 6.05.2040 6.11.2050 -600 1 6.01.2000 6.01.2000E 6.02.4060 6.02.4060E 6.04.4060 6.05.2040 6.11.2060 -800 1 6.01.2000 6.01.2000E 6.02.4080 6.02.4080E 6.04.4080 6.05.2040 6.11.2080 -400 1 6.01.2000 6.01.2000E 6.02.6040 6.02.6040E 6.04.6040 6.05.2060 6.11.2040 6.31.2060500 1 6.01.2000 6.01.2000E 6.02.6050 6.02.6050E 6.04.6050 6.05.2060 6.11.2050 6.31.2060600 1 6.01.2000 6.01.2000E 6.02.6060 6.02.6060E 6.04.6060 6.05.2060 6.11.2060 6.31.2060800 1 6.01.2000 6.01.2000E 6.02.6080 6.02.6080E 6.04.6080 6.05.2060 6.11.2080 6.31.2060400 1 6.01.2000 6.01.2000E 6.02.8040 6.02.8040E 6.04.8040 6.05.2080 6.11.2040 6.31.2080500 1 6.01.2000 6.01.2000E 6.02.8050 6.02.8050E 6.04.8050 6.05.2080 6.11.2050 6.31.2080600 1 6.01.2000 6.01.2000E 6.02.8060 6.02.8060E 6.04.8060 6.05.2080 6.11.2060 6.31.2080600 2 6.01.2000 6.01.2000E 6.02.8060 6.02.8060E 6.04.8060 6.05.2080-2D 6.11.2060 6.31.2080800 1 6.01.2000 6.01.2000E 6.02.8080 6.02.8080E 6.04.8080 6.05.2080 6.11.2080 6.31.2080800 2 6.01.2000 6.01.2000E 6.02.8080 6.02.8080E 6.04.8080 6.05.2080-2D 6.11.2080 6.31.2080400 1 6.01.2000 6.01.2000E 6.02.1040 6.02.1040E 6.04.1040 6.05.2010 6.11.2040 6.31.2010400 2 6.01.2000 6.01.2000E 6.02.1040 6.02.1040E 6.04.1040 6.05.2010-2D 6.11.2040 6.31.2010500 1 6.01.2000 6.01.2000E 6.02.1050 6.02.1050E 6.04.1050 6.05.2010 6.11.2050 6.31.2010500 2 6.01.2000 6.01.2000E 6.02.1050 6.02.1050E 6.04.1050 6.05.2010-2D 6.11.2050 6.31.2010600 1 6.01.2000 6.01.2000E 6.02.1060 6.02.1060E 6.04.1060 6.05.2010 6.11.2060 6.31.2010600 2 6.01.2000 6.01.2000E 6.02.1060 6.02.1060E 6.04.1060 6.05.2010-2D 6.11.2060 6.31.2010800 1 6.01.2000 6.01.2000E 6.02.1080 6.02.1080E 6.04.1080 6.05.2010 6.11.2080 6.31.2010800 2 6.01.2000 6.01.2000E 6.02.1080 6.02.1080E 6.04.1080 6.05.2010-2D 6.11.2080 6.31.2010

A7 - Flat pack component kits

3333

Selection : continuation.....

Note : extended vertical uprights and extended top and bottom frames are required when two columns are joined back-to back

Enclosure dimensions, mm OrderCode Nr. Height Width Depth Number Vertical Vertical Top and bottom Top and bottom Roof panel Plain door and Side panels Mounting plate of doors uprights-standard uprights- extended frame-standard frame-extended rear panel set (pack of 2) and brackets

400 2 6.01.2000 6.01.2000E 6.02.1240 6.02.1240E 6.04.1240 6.05.2012-2D 6.11.2040 6.31.2012500 2 6.01.2000 6.01.2000E 6.02.1250 6.02.1250E 6.04.1250 6.05.2012-2D 6.11.2050 6.31.2012600 2 6.01.2000 6.01.2000E 6.02.1260 6.02.1260E 6.04.1260 6.05.2012-2D 6.11.2060 6.31.2012800 2 6.01.2000 6.01.2000E 6.02.1280 6.02.1280E 6.04.1280 6.05.2012-2D 6.11.2080 6.31.2012400 2 6.01.2000 6.01.2000E 6.02.1640 6.02.1640E 6.04.1640 6.05.2016-2D 6.11.2040 6.31.2016500 2 6.01.2000 6.01.2000E 6.02.1650 6.02.1650E 6.04.1650 6.05.2016-2D 6.11.2050 6.31.2016600 2 6.01.2000 6.01.2000E 6.02.1660 6.02.1660E 6.04.1660 6.05.2016-2D 6.11.2060 6.31.2016400 1 6.01.2200 6.01.2200E 6.02.4040 6.02.4040E 6.04.4040 6.05.2240 6.11.2240 -500 1 6.01.2200 6.01.2200E 6.02.4050 6.02.4050E 6.04.4050 6.05.2240 6.11.2250 -600 1 6.01.2200 6.01.2200E 6.02.4060 6.02.4060E 6.04.4060 6.05.2240 6.11.2260 -800 1 6.01.2200 6.01.2200E 6.02.4080 6.02.4080E 6.04.4080 6.05.2240 6.11.2280 -400 1 6.01.2200 6.01.2200E 6.02.6040 6.02.6040E 6.04.6040 6.05.2260 6.11.2240 6.31.2260500 1 6.01.2200 6.01.2200E 6.02.6050 6.02.6050E 6.04.6050 6.05.2260 6.11.2250 6.31.2260600 1 6.01.2200 6.01.2200E 6.02.6060 6.02.6060E 6.04.6060 6.05.2260 6.11.2260 6.31.2260800 1 6.01.2200 6.01.2200E 6.02.6080 6.02.6080E 6.04.6080 6.05.2260 6.11.2280 6.31.2260400 1 6.01.2200 6.01.2200E 6.02.8040 6.02.8040E 6.04.8040 6.05.2280 6.11.2240 6.31.2280500 1 6.01.2200 6.01.2200E 6.02.8050 6.02.8050E 6.04.8050 6.05.2280 6.11.2250 6.31.2280600 1 6.01.2200 6.01.2200E 6.02.8060 6.02.8060E 6.04.8060 6.05.2280 6.11.2260 6.31.2280800 1 6.01.2200 6.01.2200E 6.02.8080 6.02.8080E 6.04.8080 6.05.2280 6.11.2280 6.31.2280400 1 6.01.2200 6.01.2200E 6.02.1040 6.02.1040E 6.04.1040 6.05.2210 6.11.2240 6.31.2210500 1 6.01.2200 6.01.2200E 6.02.1050 6.02.1050E 6.04.1050 6.05.2210 6.11.2250 6.31.2210600 1 6.01.2200 6.01.2200E 6.02.1060 6.02.1060E 6.04.1060 6.05.2210 6.11.2260 6.31.2210800 1 6.01.2200 6.01.2200E 6.02.1080 6.02.1080E 6.04.1080 6.05.2210 6.11.2280 6.31.2210400 2 6.01.2200 6.01.2200E 6.02.1240 6.02.1240E 6.04.1240 6.05.2212-2D 6.11.2240 6.31.2212500 2 6.01.2200 6.01.2200E 6.02.1250 6.02.1250E 6.04.1250 6.05.2212-2D 6.11.2250 6.31.2212600 2 6.01.2200 6.01.2200E 6.02.1260 6.02.1260E 6.04.1260 6.05.2212-2D 6.11.2260 6.31.2212800 2 6.01.2200 6.01.2200E 6.02.1280 6.02.1280E 6.04.1280 6.05.2212-2D 6.11.2280 6.31.2212

1200

1600

400

600

800

1000

1200

2000

2200


3434

2. Welded frames Consisting of vertical uprights , top and bottom frames welded together to form a cubicle

1200

1400

1600

1800

600

800

600

800

600

800

400

600

800

1000

1200

400 6.126040S 6.126040E 500 6.126050S 6.126050E 600 6.126060S 6.126060E 800 6.126080S 6.126080E 400 6.128040S 6.128040E 500 6.128050S 6.128050E 600 6.128060S 6.128060E 800 6.128080S 6.128080E 400 6.146040S 6.146040E 500 6.146050S 6.146050E 600 6.146060S 6.146060E 800 6.146080S 6.146080E 400 6.148040S 6.148040E 500 6.148050S 6.148050E 600 6.148060S 6.148060E 800 6.148080S 6.148080E 400 6.166040S 6.166040E 500 6.166050S 6.166050E 600 6.166060S 6.166060E 800 6.166080S 6.166080E 400 6.168040S 6.168040E 500 6.168050S 6.168050E 600 6.168060S 6.168060E 800 6.168080S 6.168080E 400 6.184040S 6.184040E 500 6.184050S 6.184050E 600 6.184060S 6.184060E 800 6.184080S 6.184080E 400 6.186040S 6.186040E 500 6.186050S 6.186050E 600 6.186060S 6.186060E 800 6.186080S 6.186080E 400 6.188040S 6.188040E 500 6.188050S 6.188050E 600 6.188060S 6.188060E 800 6.188080S 6.188080E 400 6.181040S 6.181040E 500 6.181050S 6.181050E 600 6.181060S 6.181060E 800 6.181080S 6.181080E 400 6.181240S 6.181240E 500 6.181250S 6.181250E 600 6.181260S 6.181260E 800 6.181280S 6.181280E

Enclosure dimensions, mm OrderCode Nr. Height Width Depth Frames extendable Frames extendable side-by-side front-to-rear

500 6.203050S 6.203050E 600 6.203060S 6.203060E 400 6.204040S 6.204040E 500 6.204050S 6.204050E 600 6.204060S 6.204060E 800 6.204080S 6.204080E 400 6.206040S 6.206040E 500 6.206050S 6.206050E 600 6.206060S 6.206060E 800 6.206080S 6.206080E 400 6.208040S 6.208040E 500 6.208050S 6.208050E 600 6.208060S 6.208060E 800 6.208080S 6.208080E 400 6.201040S 6.201040E 500 6.201050S 6.201050E 600 6.201060S 6.201060E 800 6.201080S 6.201080E 400 6.201240S 6.201240E 500 6.201250S 6.201250E 600 6.201260S 6.201260E 800 6.201280S 6.201280E 400 6.201640S 6.201640E 500 6.201650S 6.201650E 600 6.201660S 6.201660E 400 6.224040S 6.224040E 500 6.224050S 6.224050E 600 6.224060S 6.224060E 800 6.224080S 6.224080E 400 6.226040S 6.226040E 500 6.226050S 6.226050E 600 6.226060S 6.226060E 800 6.226080S 6.226080E 400 6.228040S 6.228040E 500 6.228050S 6.228050E 600 6.228060S 6.228060E 800 6.228080S 6.228080E 400 6.221040S 6.221040E 500 6.221050S 6.221050E 600 6.221060S 6.221060E 800 6.221080S 6.221080E 400 6.221240S 6.221240E 500 6.221250S 6.221250E 600 6.221260S 6.221260E 800 6.221280S 6.221280E

300

400

600

800

1000

1200

1600

400

600

800

1000

1200

2000

2200

Enclosure dimensions, mm OrderCode Nr. Height Width Depth Frames extendable Frames extendable side-by-side front-to-rear

Packed and ready for delivery.

35

Frames, door, panels and plinths A-7 Extendable Enclosures EP 8000


36

1 Vertical uprights Packs of 4.

3. Top and bottom frames Packs of 1 pair set.

2. Centre bar upright Packs of 1.

Enclosure dimensions, mm OrderCode Nr. Height

1600 6.01.1600C 1800 6.01.1800C 2000 6.01.2000C 2200 6.01.2200C

Enclosure nominal dimensions, mm OrderCode Nr. Height Standard version Extended version

1600 6.01.1600 6.01.1600E 1800 6.01.1800 6.01.1800E 2000 6.01.2000 6.01.2000E 2200 6.01.2200 6.01.2200E

400

600

700

800

900

1000

1200

Enclosure nominal dimensions, mm OrderCode Nr. Width Depth Standard version Extended version

400 6.02.4040 6.02.4040E 500 6.02.4050 6.02.4050E 600 6.02.4060 6.02.4060E 800 6.02.4080 6.02.4080E 400 6.02.6040 6.02.6040E 500 6.02.6050 6.02.6050E 600 6.02.6060 6.02.6060E 800 6.02.6080 6.02.6080E 400 6.02.7040 6.02.7040E 500 6.02.7050 6.02.7050E 600 6.02.7060 6.02.7060E 800 6.02.7080 6.02.7080E 400 6.02.8040 6.02.8040E 500 6.02.8050 6.02.8050E 600 6.02.8060 6.02.8060E 800 6.02.8080 6.02.8080E 400 6.02.9040 6.02.9040E 500 6.02.9050 6.02.9050E 600 6.02.9060 6.02.9060E 800 6.02.9080 6.02.9080E 400 6.02.1040 6.02.1040E 500 6.02.1050 6.02.1050E 600 6.02.1060 6.02.1060E 800 6.02.1080 6.02.1080E 400 6.02.1240 6.02.1240E 500 6.02.1250 6.02.1250E 600 6.02.1260 6.02.1260E 800 6.02.1280 6.02.1280E

Top and bottom frame

Vertical uprights Centre bar uprights

A7 - Frames, door, panels and plinths

37

4. Single leaf doors - plainMounted with door stiffeners, swing handle key alike locking system.Packs of 1.

5 Single leaf doors - transparent - packs of 1Mounted with door stiffeners, swing handle key alike locking system.Transparent door, it is mounted with 4mm safety tempered glass.4 e

Enclosure nominal dimensions, mm OrderCode Nr. Height Width Plain Standard Version Plain - Centre Bar Version

300 6.06.1630 6.06.1630.CB 400 6.06.1640 6.06.1640.CB 600 6.06.1660 6.06.1660.CB 1600 700 6.06.1670 6.06.1670.CB 800 6.06.1680 6.06.1680.CB 900 6.06.1690 6.06.1690.CB 1000 6.06.1610 6.06.1610.CB 300 6.06.1830 6.06.1830.CB 400 6.06.1840 6.06.1840.CB 600 6.06.1860 6.06.1860.CB 1800 700 6.06.1870 6.06.1870.CB 800 6.06.1880 6.06.1880.CB 900 6.06.1890 6.06.1890.CB 1000 6.06.1810 6.06.1810.CB 300 6.06.2030 6.06.2030.CB 400 6.06.2040 6.06.2040.CB 600 6.06.2060 6.06.2060.CB 2000 700 6.06.2070 6.06.2070.CB 800 6.06.2080 6.06.2080.CB 900 6.06.2090 6.06.2090.CB 1000 6.06.2010 6.06.2010.CB 300 6.06.2230 6.06.2230.CB 400 6.06.2240 6.06.2240.CB 600 6.06.2260 6.06.2260.CB 2200 700 6.06.2270 6.06.2270.CB 800 6.06.2280 6.06.2280.CB 900 6.06.2290 6.06.2290.CB 1000 6.06.2210 6.06.2210.CB

Enclosure nominal dimensions, mm OrderCode Nr. Height Width Cut-out centred Cut-out offset to lock Cut-out offset to hinge

400 6.06.1640C - - 600 6.06.1660C - - 1600 700 6.06.1670C - - 800 6.06.1680C 6.06.1680L 6.06.1680H 900 6.06.1690C 6.06.1690L 6.06.1690H 1000 6.06.1610C 6.06.1610L 6.06.1610H 400 6.06.1840C - - 600 6.06.1860C - - 1800 700 6.06.1870C - - 800 6.06.1880C 6.06.1880L 6.06.1880H 900 6.06.1890C 6.06.1890L 6.06.1890H 1000 6.06.1810C 6.06.1810L 6.06.1810H 400 6.06.2040C - - 600 6.06.2060C - - 2000 700 6.06.2070C - - 800 6.06.2080C 6.06.2080L 6.06.2080H 900 6.06.2090C 6.06.2090L 6.06.2090H 1000 6.06.2010C 6.06.2010L 6.06.2010H 400 6.06.2240C - - 600 6.06.2260C - - 2200 700 6.06.2270C - - 800 6.06.2280C 6.06.2280L 6.06.2280H 900 6.06.2290C 6.06.2290L 6.06.2290H 1000 6.06.2210C 6.06.2210L 6.06.2210H

Note : for door cut-out with radius -add “R” to the OrderCode Nr. For example : 6.06.2060C-R

Single leaf doors - transparent

Single leaf doors - plain


38

6. Overlapping doors - equal width Mounted with door stiffeners, swing handle key alike locking system.

Enclosure nominal dimensions, mm OrderCode Nr. Height Width Plain Standard Version Removable Centre Bar Version

1600 1000 6.07.1610 6.07.1610B 1200 6.07.1612 6.07.1612B 1800 1000 6.07.1810 6.07.1810B 1200 6.07.1812 6.07.1812B 2000 1000 6.07.2010 6.07.2010B 1200 6.07.2012 6.07.2012B 2200 1000 6.07.2210 6.07.2210B 1200 6.07.2212 6.07.2212B

7. Roof panels - packs of 1

400

600

700

800

900

1000

1200

Enclosure nominal dimensions, mm OrderCode Nr. Width Depth Plain version

400 6.04.4040 500 6.04.4050 600 6.04.4060 800 6.04.4080 400 6.04.6040 500 6.04.6050 600 6.04.6060 800 6.04.6080 400 6.04.7040 500 6.04.7050 600 6.04.7060 800 6.04.7080 400 6.04.8040 500 6.04.8050 600 6.04.8060 800 6.04.8080 400 6.04.9040 500 6.04.9050 600 6.04.9060 800 6.04.9080 400 6.04.1040 500 6.04.1050 600 6.04.1060 800 6.04.1080 400 6.04.1240 500 6.04.1250 600 6.04.1260 800 6.04.1280

8. Rear panels - packs of 1

Enclosure nominal dimensions, mm OrderCode Nr. Height Width Plain version 400 6.09.1640 600 6.09.1660 700 6.09.1670 1600 800 6.09.1680 900 6.09.1690 1000 6.09.1610 1200 6.09.1612 400 6.09.1840 600 6.09.1860 700 6.09.1870 1800 800 6.09.1880 900 6.09.1890 1000 6.09.1810 1200 6.09.1812 400 6.09.2040 600 6.09.2060 700 6.09.2070 2000 800 6.09.2080 900 6.09.2090 1000 6.09.2010 1200 6.09.2012 400 6.09.2240 600 6.09.2260 700 6.09.2270 2200 800 6.09.2280 900 6.09.2290 1000 6.09.2210 1200 6.09.2212

Note: Part of OrderCodeNrs 6.04.6080 and 6.04.8060 are identical

Roof panel

Overlapping doors - equal width

Rear panels - packs of 1


39

9. Side panels - packs of 2

Enclosure nominal dimensions, mm OrderCode Nr. Height Width Depth Plain version Extended Version

- 400 6.11.1640 6.11.1640E - 500 6.11.1650 6.11.1650E - 600 6.11.1660 6.11.1660E - 800 6.11.1680 6.11.1680E - 400 6.11.1840 6.11.1840E - 500 6.11.1850 6.11.1850E - 600 6.11.1860 6.11.1860E - 800 6.11.1880 6.11.1880E - 400 6.11.2040 6.11.2040E - 500 6.11.2050 6.11.2050E - 600 6.11.2060 6.11.2060E - 800 6.11.2080 6.11.2080E - 400 6.11.2240 6.11.2240E - 500 6.11.2250 6.11.2250E - 600 6.11.2260 6.11.2260E - 800 6.11.2280 6.11.2280E

1600

1800

2000

2200

10. Roof panel infi llTo close the gap when roof panels are bayed side-to-side or front to rear.Material: electro galvanised steel.Packs of 4.

For enclosure OrderCode Nr. width / depth, mm

300 6.17.0300 400 6.17.0400 500 6.17.0500 600 6.17.0600 700 6.17.0700 800 6.17.0800 900 6.17.0900 1000 6.17.1000

11. Cable entry module - side openingTo be positioned at the end of a enclosure suite. For protecting cable / busbar and connector systems.Supply includes: basic frame column, side and roof panels, gasketed door mounted with stiffeners and swing handle key alike locking system.Packs of 1 set.

Enclosure nominal dimensions, mm OrderCode Nr. Height Width Depth Plain version 500 6.14.1650 1600 600 6.14.1660 800 6.14.1680 500 6.14.1850 1800 600 6.14.1860 800 300 6.14.1880 500 6.14.2050 2000 600 6.14.2060 800 6.14.2080 500 6.14.2250 2200 600 6.14.2260 800 6.14.2280

Roof panel infi ll

Side panels - packs of 2

Cable entry module - side opening


40

1600

1800

300

2000

2200

Enclosure nominal dimensions, mm OrderCode Nr. Height Width Depth Plain version 400 6.15.1640 500 6.15.1650 600 6.15.1660 800 6.15.1680 400 6.15.1840 500 6.15.1850 600 6.15.1860 800 6.15.1880 400 6.15.2040 500 6.15.2050 600 6.15.2060 800 6.15.2080 400 6.15.2240 500 6.15.2250 600 6.15.2260 800 6.15.2280

12. Cable entry module - front openingTo be used as an end or an intermediate element in a suite of enclosures.Front and/or rear access.Supply includes: basic frame, top and rear panels, gasket-ed door mounted with swing handle key alike locking system.Packs of 1 set.

Enclosure OrderCode Nr. width, mm 100 mm high 200 mm high 300 6.20.1030 6.20.2030 400 6.20.1040 6.20.2040 500 6.20.1050 6.20.2050 600 6.20.1060 6.20.2060 700 6.20.1070 6.20.2070 800 6.20.1080 6.20.2080 900 6.20.1090 6.20.2090 1000 6.20.1100 6.20.2100 1100 6.20.1110 6.20.2110 1200 6.20.1120 6.20.2120 1300 6.20.1130 6.20.2130 1400 6.20.1140 6.20.2140

13. Plinth/base components, front and rear. Surface fi nish: powder-coated in texture RAL 9002. Optional RAL 7035 texture. Supply includes: 4 corners and 2 cross channels.

14. Plinth/base - side trim Surface fi nish: powder-coated in texture RAL 9002. Optional RAL 7035 texture. Supply includes: 2 trim channels (4 trim channels in case of 200mm high plinth)

15. Lifting Eyebolts, M12 Packs of 4.


16. Lifting bracketsPacks of 4.

Enclosure OrderCode Nr. depth, mm 100 mm high 200 mm high

300 6.21.1030 6.21.2030 400 6.21.1040 6.21.2040 600 6.21.1060 6.21.2060 800 6.21.1080 6.21.2080 1000 6.21.1100 6.21.2100

OrderCode Nr. 6.00.0002

Plinth/base components, front and rear

Plinth/base - side trim

Lifting Eyebolts, M12 Lifting brackets

Cable entry module - front opening


41

17. Baying / joining set - cubicle suiteUse to grant more rigidity to enclosures joined in a suite.

18. Door retainerHolds the door open at 120 degree to avoid accidental closing.

19 Document pockets Mount to the door stiffeners.

20. Door switch c/w mounting brackets

21. Compact fl uorescent lamp, 220V/50Hz,60W c/w switch and mounting brackets

22. Spray touch-up paint - aerosol can






For door OrderCode Nr. width, mm

400 6.19.0400 500 6.19.0500 600 6.19.0600 700 6.19.0700 800 6.19.0800

Baying / joining set - cubicle suite

Document pockets

Door retainer

Compact fl uorescent lamp

Spray touch-up paint.

Door switch c/w mounting brackets


42

23. Mounting bracketsMaterial: Zinc passivated steelPacks of 4.

25. Levelling feetTo compensate for height differences with fl oor irregularities.Packs of 4.

24. Spacers - for roof panelTo raise the roof for ventilation purposes, in three different heights.Packs of 4.

Height, mm OrderCode Nr. 10 6.00.0006 20 6.00.0007 50 6.00.0008



26. Cage nutsInstall on enclosures, punched sections and rails with rectangular system punching 12.5 x 10.5 mmPacks of 50.

OrderCode Nr. Thread

CN-M6-50 M6 CN-M8-50 M8

OrderCode Nr. Dimensions, mm Type of Screw

HHST-M5x10-500 M5 x 10 Hex fl anged head HHST-M5x12-500 M5 x 12 Hex fl anged head PHST-M5x12-500 M5 x 12 Philip head PHST-M5x16-500 M5 x 16 Philip head PHST-M6x12-500 M6 x 12 Philip head

27. Self- tapping screws For the round holes 4.5 mm diameter in the enclosure section, punched sections and punched rails Packs of 500 pcs.

Levelling feet

Cage nuts

Spacers - for roof panel

Mounting brackets

Self-tapping screws

43

Gland plates, mounting plates, side dividers and 19” frames.



44

1. Bottom gland plates - one piece type Material: zincpassivated steel.Packs of 1.

2. Bottom gland plates - 3 piece typeMaterial: zincpassivated steel.Packs of 1 set.

3. Bottom brackets - for mounting gland platesMaterial: electro galvanised steel.Packs of 2.

300

400

500

600

700

800

For enclosure OrderCode Nr. width, mm depth, mm Plain type

400 6.25.3040 500 6.25.3050 600 6.25.3060 800 6.25.3080 400 6.25.4040 500 6.25.4050 600 6.25.4060 800 6.25.4080 400 6.25.5040 500 6.25.5050 600 6.25.5060 800 6.25.5080 400 6.25.6040 500 6.25.6050 600 6.25.6060 800 6.25.6080 400 6.25.7040 500 6.25.7050 600 6.25.7060 800 6.25.7080 400 6.25.8040 500 6.25.8050 600 6.25.8060 800 6.25.8080

For enclosure OrderCode Nr. depth, mm

400 6.29.0400500 6.29.0500600 6.29.0600800 6.29.0800

For enclosure OrderCode Nr. width, mm depth, mm Plain type

400 6.26.4040 500 6.26.4050 600 6.26.4060 800 6.26.4080 400 6.26.5040 500 6.26.5050 600 6.26.5060 800 6.26.5080 400 6.26.6040 500 6.26.6050 600 6.26.6060 800 6.26.6080 400 6.26.7040 500 6.26.7050 600 6.26.7060 800 6.26.7080 400 6.26.8040 500 6.26.8050 600 6.26.8060 800 6.26.8080

400

500

600

700

800

Bottom brackets - for mounting gland plates

Bottom gland plate - 3 piece type

Bottom gland plate

A7 - Gland plates, mounting plates, side dividers and 19” frames

45

4 Full height mounting plates Material: zincpassivated steel. Packs of 1, come with mounting brackets.

5. Intermediate mounting platesMaterial: zincpassivated steel.Packs of 1.

6. Depth profi les Material: electro galvanised steel. RAL 7035 Packs of 4.

For enclosure OrderCode Nr. height, mm

1600 6.32.16001800 6.32.18002000 6.32.20002200 6.32.2200

For enclosure OrderCode Nr. depth, mm

400 6.59.0400500 6.59.0500600 6.59.0600800 6.59.0800

For enclosure OrderCode Nr. height, mm width, mm Plain type

400 6.31.1640 500 6.31.1650 600 6.31.1660 700 6.31.1670 800 6.31.1680 900 6.31.1690 1000 6.31.1610 1200 6.31.1612 400 6.31.1840 500 6.31.1850 600 6.31.1860 700 6.31.1870 800 6.31.1880 900 6.31.1890 1000 6.31.1810 1200 6.31.1812 400 6.31.2040 500 6.31.2050 600 6.31.2060 700 6.31.2070 800 6.31.2080 900 6.31.2090 1000 6.31.2010 1200 6.31.2012 400 6.31.2240 500 6.31.2250 600 6.31.2260 700 6.31.2270 800 6.31.2280 900 6.31.2290 1000 6.31.2210 1200 6.31.2212

1600

1800

2000

2200

Depth profi les

Full height mounting plates Intermediate mounting plates


46

8. 19” swing frames Material: electro galvanised steel. Supplied with fi xing accessories. Packs of 1 set.

For enclosure For enclosure For compartment OrderCode Nr. height, mm width, mm width, mm Installed centre Installed offset

700 600 6.37.1670C 6.37.1670S 800 700 6.37.1680C 6.37.1680S 700 600 6.37.1870C 6.37.1870S 800 700 6.37.1880C 6.37.1880S 700 600 6.37.2070C 6.37.2070S 800 700 6.37.2080C 6.37.2080S 700 600 6.37.2270C 6.37.2270S 800 700 6.37.2280C 6.37.2280S

1600

1800

2000

2200

7 Partial mounting plates Material: zincpassivated steel.Packs of 1,

19” swing frames

Partial mounting plates - rear view

For compartment For enclosures OrderCode Nr. height, mm width / depth, mm Plain type

600 6.33.6060 800 6.33.8060 1000 6.33.1060 1200 6.33.1260 600 6.33.6070 800 6.33.8070 1000 6.33.1070 1200 6.33.1270 600 6.33.6080 800 6.33.8080 1000 6.33.1080 1200 6.33.1280

600

700

800

A7 - Gland plates, mounting plates, side dividers and 19” frames

47

9. 19” fi xed framesMaterial: electro galvanised steel. Supplied with fi xing accessories. Packs of 1 set.

10. Inter-cubicle partitionsMetal partition, used to separate two adjacent cubicles.It is made up of two panels, each half the height of the enclosures.The top and bottom ends have knock-outs for busbars and conductors.The partition is mounted on the framework and does not hinder installation of thefunctional mounting plates.Material: zincpassivated steel.Packs of 2 pieces.

For enclosure For enclosure For compartment OrderCode Nr. height, mm width, mm width, mm Installed centre

600 500 6.38.1660 1600 700 600 6.38.1670 800 700 6.38.1680 600 500 6.38.1860 1800 700 600 6.38.1870 800 700 6.38.1880 600 500 6.38.2060 2000 700 600 6.38.2070 800 700 6.38.2080 600 500 6.38.2260 2200 700 600 6.38.2270 800 700 6.38.2280

19” Fixed frames

Inter-cubicle partitions

1600

1800

2000

2200

For enclosure Compartment height, mm depth, mm depth, mm

400 6.16.1640 300 500 6.16.1650 400 600 6.16.1660 500 800 6.16.1680 700 400 6.16.1840 300 500 6.16.1850 400 600 6.16.1860 500 800 6.16.1880 700 400 6.16.2040 300 500 6.16.2050 400 600 6.16.2060 500 800 6.16.2080 700 400 6.16.2240 300 500 6.16.2250 400 600 6.16.2260 500 800 6.16.2280 700

OrderCode Nr.


48

12. Horizontal mounting plate - plainMaterial: zincpassivated steel.Packs of 1.

13. Depth rails for horizontal mounting plateMaterial: zincpassivated steel.Packs of 2.

For compartment Component depth, mm length, mm

200 6.49.0200 200 250 6.49.0250 250 300 6.49.0300 300 400 6.49.0400 400 500 6.49.0500 500

OrderCode Nr.

11. Front cover panelsMaterial: electro galvanised steel.Packs of 1.

For enclosure For compartment height, mm width, mm

150 6.12.1615 250 6.12.1625 150 6.12.1815 250 6.12.1825 150 6.12.2015 250 6.12.2025 150 6.12.2215 250 6.12.2225

1600

1800

2000

2200

OrderCode Nr.

Mounting plate depth mm

OrderCode Nr. for enclosure width, mm

400 500 600 700 800

200 6.78.4020 6.78.5020 6.78.6020 6.78.7020 6.78.8020250 6.78.4025 6.78.5025 6.78.6025 6.78.7025 6.78.8025300 6.78.4030 6.78.5030 6.78.6030 6.78.7030 6.78.8030400 6.78.4040 6.78.5040 6.78.6040 6.78.7040 6.78.8040500 6.78.4050 6.78.5050 6.78.6050 6.78.7050 6.78.8050

Horizontal mounting plate - plain (front & back view)

Front cover panel (front & back view)

Depth rails

49

Form 2 - 4 structures



50

1. Functional space side panels - closed and open Material: zincpassivated steel. Packs of 2

For enclosure Space side panel OrderCode Nr. Height, mm Depth, mm Closed Panel Open Panel

200 6.70.1620 6.71.1620 225 6.70.1622 6.71.16221600 250 6.70.1625 6.71.1625 300 6.70.1630 6.71.1630 400 6.70.1640 6.71.1640 200 6.70.1820 6.71.1820 225 6.70.1822 6.71.18221800 250 6.70.1825 6.71.1825 300 6.70.1830 6.71.1830 400 6.70.1840 6.71.1840 200 6.70.2020 6.71.2020 225 6.70.2022 6.71.20222000 250 6.70.2025 6.71.2025 300 6.70.2030 6.71.2030 400 6.70.2040 6.71.2040 200 6.70.2220 6.71.2220 225 6.70.2222 6.71.22222200 250 6.70.2225 6.71.2225 300 6.70.2230 6.71.2230 400 6.70.2240 6.71.2240

2 Partial doors - plain Material: electro galvanised steel. RAL7035. Packs of 1, comes with hinges and quarter turn 5mm double bit insert lock and assembly accessories

For Number of OrderCode Nr. partial door quarter turn for enclosure width, mm height, mm locks 300 400 500 600 700 800

200 1 - 6.73.0240 6.73.0250 6.73.0260 6.73.0270 6.73.0280 250 1 - 6.73.2540 6.73.2550 6.73.2560 6.73.2570 6.73.2580 300 1 - 6.73.3040 6.73.3050 6.73.3060 6.73.3070 6.73.3080 400 1 - 6.73.4040 6.73.4050 6.73.4060 6.73.4070 6.73.4080 500 2 - 6.73.5040 6.73.5050 6.73.5060 6.73.5070 6.73.5080 600 2 - 6.73.6040 6.73.6050 6.73.6060 6.73.6070 6.73.6080 800 2 - 6.73.8040 6.73.8050 6.73.8060 6.73.8070 6.73.8080 1000 2 - 6.73.1040 6.73.1050 6.73.1060 6.73.1070 6.73.1080 1400 3 - 6.73.1440 6.73.1450 6.73.1460 6.73.1470 6.73.1480 1600 3 6.73.1630 6.73.1640 6.73.1650 6.73.1660 6.73.1670 6.73.1680 1800 3 6.73.1830 6.73.1840 6.73.1850 6.73.1860 6.73.1870 6.73.1880 2000 3 6.73.2030 6.73.2040 6.73.2050 6.73.2060 6.73.2070 6.73.2080

Functional space side panels - closed and open(View as when fi xed)

Partial doors - plain

A7 - Form 2 - 4 structures

51

3 Partial doors - Full height type - plain Material: electro galvanised steel. RAL7035. Packs of 1, comes with hinges and quarter turn 5 mm double bit insert lock and assembly accessories

For enclosure Number of OrderCode Nr.height, mm quarter turn locks for enclosure width, mm

300 400 500 600 700 1600 3 6.73.1630.FH 6.73.1640.FH 6.73.1650.FH 6.73.1660.FH 6.73.1670.FH 1800 3 6.73.1830.FH 6.73.1840.FH 6.73.1850.FH 6.73.1860.FH 6.73.1870.FH 2000 3 6.73.2030.FH 6.73.2040.FH 6.73.2050.FH 6.73.2060.FH 6.73.2070.FH 2200 3 6.73.2230.FH 6.73.2240.FH 6.73.2250.FH 6.73.2260.FH 6.73.2270.FH

4. Partial doors - Customised Material: electro galvanised steel. RAL7035. Packs of 1, comes with hinges and quarter turn 5mm double bit insert lock and assembly accessoriesCut-out dimensions ( Height x Width mm ) and location on the door panel shall base on buyer’s request. Providing additional information such as Breaker Brand and Model would be most useful.

For Number of OrderCode Nr. partial door quarter turn for enclosure width, mm height, mm locks 400 500 600 700 800 200 1 6.80.0240(H..xD..) 6.80.0250(H..xD..) 6.80.0260(H..xD..) 6.80.0270(H..xD..) 6.80.0280(H..xD..) 250 1 6.80.2540(H..xD..) 6.80.2550(H..xD..) 6.80.2560(H..xD..) 6.80.2570(H..xD..) 6.80.2580(H..xD..) 300 1 6.80.3040(H..xD..) 6.80.3050(H..xD..) 6.80.3060(H..xD..) 6.80.3070(H..xD..) 6.80.3080(H..xD..) 400 1 6.80.4040(H..xD..) 6.80.4050(H..xD..) 6.80.4060(H..xD..) 6.80.4070(H..xD..) 6.80.4080(H..xD..) 500 2 6.80.5040(H..xD..) 6.80.5050(H..xD..) 6.80.5060(H..xD..) 6.80.5070(H..xD..) 6.80.5080(H..xD..) 600 2 6.80.6040(H..xD..) 6.80.6050(H..xD..) 6.80.6060(H..xD..) 6.80.6070(H..xD..) 6.80.6080(H..xD..) 800 2 6.80.8040(H..xD..) 6.80.8050(H..xD..) 6.80.8060(H..xD..) 6.80.8070(H..xD..) 6.80.8080(H..xD..)

Partial doors - Full height type - plain

Partial doors - Customised 5. Door cross tie For use as sealing member between partial doors and trim panels. Material: electro galvanised steel. RAL7035. Packs of 6, come with assembly accessories

For enclosure width, mm Component length, mm OrderCode Nr. 400 300 6.72.0400500 400 6.72.0500600 500 6.72.0600700 600 6.72.0700800 700 6.72.0800

Door cross tie


52

6. Intermediate Uprights, 50x50 mm and 50x25 mm.Material: electro galvanised steel.Finish: RAL7035.Packs of 2

For enclosure Component OrderCode Nr. height, mm length, mm 50x50 mm 50x25 mm

1600 1500 6.44.1600 6.43.16001800 1700 6.44.1800 6.43.18002000 1900 6.44.2000 6.43.20002200 2100 6.44.2200 6.43.2200

8 Punched sections 50x50 mm and 50x25 mmMaterial: zincpassivated steel.Packs of 2 including support brackets

For enclosure Component OrderCode Nr. width/depth, mm length, mm 50x50 mm 50x25 mm 300 200 6.60.0300 6.61.0300 400 300 6.60.0400 6.61.0400 500 400 6.60.0500 6.61.0500 600 500 6.60.0600 6.61.0600 700 600 6.60.0700 6.61.0700 800 700 6.60.0800 6.61.0800 900 800 6.60.0900 6.61.0900 1000 900 6.60.1000 6.61.1000 1100 1000 6.60.1100 6.61.1100 1200 1100 6.60.1200 6.61.1200

7. Intermediate Uprights, 50x100mm.Material: electro galvanised steel.RAL7035.Packs of 2

For enclosure Component OrderCode Nr. height, mm length, mm

1600 1500 6.63.16001800 1700 6.63.18002000 1900 6.63.20002200 2100 6.63.2200

Punched sections 50x50 mm and 50x25 mm

Intermediate Uprights


53

OrderCode Nr. for enclosure width, mm 400 500 600 700 800

100 6.92.1040 6.92.1050 6.92.1060 6.92.1070 6.92.1080150 6.92.1540 6.92.1550 6.92.1560 6.92.1570 6.92.1580200 6.92.2040 6.92.2050 6.92.2060 6.92.2070 6.92.2080300 6.92.3040 6.92.3050 6.92.3060 6.92.3070 6.92.3080400 6.92.4040 6.92.4050 6.92.4060 6.92.4070 6.92.4080500 6.92.5040 6.92.5050 6.92.5060 6.92.5070 6.92.5080600 6.92.6040 6.92.6050 6.92.6060 6.92.6070 6.92.6080700 6.92.7040 6.92.7050 6.92.7060 6.92.7070 6.92.7080

For panel height mm

11. Modular panels - plainMaterial: electro galvanised steel. RAL7035.Packs of 2

12. Modular panels - CustomisedMaterial: electro galvanised steel. RAL7035.Cut-out dimensions ( Height x Width mm ) and location on the panel shall base on buyer’s request. Providing additional information such as Breaker Brand and Model would be most useful.Packs of 1.

10. Front trim panels for busbar compartmentTo conceal a 300mm high busbar compartment. RAL7035.Packs of 1 set, combination of 300mm and 100mm front trim panel and assembly parts.

For enclosure Height of front trim panels OrderCode Nr width, mm Top, mm Bottom, mm IP 55 Sealed IP 2X Vented

400 300 100 6.83.0400 6.84.0400500 300 100 6.83.0500 6.84.0500600 300 100 6.83.0600 6.84.0600700 300 100 6.83.0700 6.84.0700800 300 100 6.83.0800 6.84.0800400 100 300 6.83.0400.B 6.84.0400.B500 100 300 6.83.0500.B 6.84.0500.B600 100 300 6.83.0600.B 6.84.0600.B700 100 300 6.83.0700.B 6.84.0700.B800 100 300 6.83.0800.B 6.84.0800.B

9. Front trim panels, Height: 100 mm.Required as upper and lower height fi ller when partial doors are used. Material: electro galvanised steel. RAL7035.Packs of 1 set, combination of top and bottom 100mm high trim panels including assembly accessories.

OrderCode Nr.Design Packs of For enclosure width, mm

400 500 600 700 800IP 55 sealed 1 set 6.81.0400 6.81.0500 6.81.0600 6.81.0700 6.81.0800IP2X ventilated 1 set 6.82.0400 6.82.0500 6.82.0600 6.82.0700 6.82.0800

Front trim panel

Front trim panels for busbar compartment

Modular panel - plain

Modular panel - customised

For Panel OrderCode Nr. Height, for enclosure width, mm mm 400 500 600 700 800

200 6.90.2040(H..xD..) 6.90.2050(H..xD..) 6.90.2060(H..xD..) 6.90.2070(H..xD..) 6.90.2080(H..xD..) 300 6.90.3040(H..xD..) 6.90.3050(H..xD..) 6.90.3060(H..xD..) 6.90.3070(H..xD..) 6.90.3080(H..xD..) 400 6.90.4040(H..xD..) 6.90.4050(H..xD..) 6.90.4060(H..xD..) 6.90.4070(H..xD..) 6.90.4080(H..xD..) 500 6.90.5040(H..xD..) 6.90.5050(H..xD..) 6.90.5060(H..xD..) 6.90.5070(H..xD..) 6.90.5080(H..xD..) 600 6.90.6040(H..xD..) 6.90.6050(H..xD..) 6.90.6060(H..xD..) 6.90.6070(H..xD..) 6.90.6080(H..xD..) 700 6.90.7040(H..xD..) 6.90.7050(H..xD..) 6.90.7060(H..xD..) 6.90.7070(H..xD..) 6.90.7080(H..xD..)

g


54

16. Support rails DIN 35 / 7.5 Material: zincpassivated steel. Packs of 6.


6.93.0400 6.93.0500 6.93.0600 6.93.0700 6.93.0800

13. Modular panels - VentedMaterial: electro galvanised steel.RAL7035.Packs of 2

15. Modular panels - meter device 72x72 and 96x96 mm cut-outsMaterial: electro galvanised steel. RAL7035.Packs of 2.


400 500 600 700 800150 72x72 mm 6.94.1472 6.94.1572 6.94.1672 6.94.1772 6.94.1872150 96x96 mm 6.94.1496 6.94.1596 6.94.1696 6.94.1796 6.94.1896200 72x72 mm 6.94.2472 6.94.2572 6.94.2672 6.94.2772 6.94.2872200 96x96 mm 6.94.2496 6.94.2596 6.94.2696 6.94.2796 6.94.2896

For panel Cut-out for height, mm meter device


400 500 600 700 800100 6.91.1040 6.91.1050 6.91.1060 6.91.1070 6.91.1080150 6.91.1540 6.91.1550 6.91.1560 6.91.1570 6.91.1580200 6.91.2040 6.91.2050 6.91.2060 6.91.2070 6.91.2080300 6.91.3040 6.91.3050 6.91.3060 6.91.3070 6.91.3080400 6.91.4040 6.91.4050 6.91.4060 6.91.4070 6.91.4080500 6.91.5040 6.91.5050 6.91.5060 6.91.5070 6.91.5080600 6.91.6040 6.91.6050 6.91.6060 6.91.6070 6.91.6080700 6.91.7040 6.91.7050 6.91.7060 6.91.7070 6.91.7080

For panel height, mm

14. Modular panels - DIN cut-outMaterial: electro galvanised steel.Packs of 2

OrderCode Nr. for enclosure width, mm 400[12DIN module] 500 [16 DIN module] 600 [24 DIN module] 700 [30 DIN module] 800 [36DIN module]

150 1 row 6.95.1540 6.95.1550 6.95.1560 6.95.1570 6.95.1580200 1 row 6.95.2040 6.95.2050 6.95.2060 6.95.2070 6.95.2080300 2 rows 6.95.3040 6.95.3050 6.95.3060 6.95.3070 6.95.3080600 3 rows 6.95.6040 6.95.6050 6.95.6060 6.95.6070 6.95.6080

For panel Cut-out height, with mm DIN row

Modular panels - Vented

Modular panelW - meter device cut-outs

Modular panel - Din cut-outs

Support rails DIN 35 / 7.5


55

20. Slide rails - come with one fl angeMaterial: zincpassivated steel.Packs of 10, including angle brackets.

Component OrderCode Nr. length, mm

150 6.56.0150100 6.56.0100

19. Slide rails without fl anges Material: zincpassivated steel. Packs of 10, including angle brackets

For compartment OrderCode Nr. Component depth, mm length, mm

200 6.53.0200 200225 6.53.0225 225250 6.53.0250 250300 6.53.0300 300350 6.53.0350 350400 6.53.0400 400500 6.53.0500 500

18. Slide rails with fl anges Material: zincpassivated steel. Packs of 10, including angle brackets

For compartment OrderCode Nr. Component depth, mm length, mm

200 6.54.0200 200225 6.54.0225 225250 6.54.0250 250300 6.54.0300 300350 6.54.0350 350400 6.54.0400 400500 6.54.0500 500

17. Support rails DIN 35 / 15 Material: zincpassivated steel. Packs of 6.


6.96.0400 6.96.0500 6.96.0600 6.96.0700 6.96.0800

Slide rails with fl anges

Slide rails without fl anges

Slide rails with one fl ange

Back mounting plate - plain

21. Back mounting plate - plain For direct fi xing to the angle brackets of the slide rails. Material : zincpassivated steel. Packs of 4,


200 190 6.79.2040 6.79.2050 6.79.2060 6.79.2070 6.79.2080 250 240 6.79.2540 6.79.2550 6.79.2560 6.79.2570 6.79.2580 300 290 6.79.3040 6.79.3050 6.79.3060 6.79.3070 6.79.3080 400 390 6.79.4040 6.79.4050 6.79.4060 6.79.4070 6.79.4080 600 590 6.79.6040 6.79.6050 6.79.6060 6.79.6070 6.79.6080 700 690 6.79.7040 6.79.7050 6.79.7060 6.79.7070 6.79.7080

For Mounting compartment plate height, mm height, mm

Support rails DIN 35 / 15


56

25 Horizontal functional space divider For horizontal separation of compartments. Material: zincpassivated steel. Packs of 4

400

500

600

700

800

For enclosure For Compartment OrderCode Nr. width, mm depth, mm Vented Plain 200 6.74.4020 6.75.4020

225 6.74.4022 6.75.4022 250 6.74.4025 6.75.4025 300 6.74.4030 6.75.4030 200 6.74.5020 6.75.5020 225 6.74.5022 6.75.5022 250 6.74.5025 6.75.5025 300 6.74.5030 6.75.5030 200 6.74.6020 6.75.6020 225 6.74.6022 6.75.6022 250 6.74.6025 6.75.6025 300 6.74.6030 6.75.6030 200 6.74.7020 6.75.7020 225 6.74.7022 6.74.7022 250 6.74.7025 6.75.7025 300 6.74.7030 6.75.7030 200 6.74.8020 6.75.8020 225 6.74.8022 6.75.8022 250 6.74.8025 6.75.8025 300 6.74.8030 6.75.8030

22. Vertical brackets - Back Mounting Plate For installing the Back Mounting Plates to the functional space side panelsMaterial: zincpassivated steel.Packs of 4.

23. Feedback rails Material: zincpassivated steel. Packs of 10, including assembly accessories

For compartment Mounting plate OrderCode Nr. height, mm height, mm

200 190 6.85.0200 250 240 6.85.0250 300 290 6.85.0300 400 390 6.85.0400 500 490 6.85.0500 600 590 6.85.0600 700 690 6.85.0700


6.86.0400 6.86.0500 6.86.0600 6.86.0700 6.86.0800

Vertical brackets - Back mounting plate

Feedback rails

24 Feedback mounting plate - plainMaterial: zincpassivated steel.Packs of 4, including assembly fasteners

For compartment height, mm

OrderCode Nr. feedback mounting plate width, mm

200 250 300 350 400 200 6.87.2020 6.87.2025 6.87.2030 - - 300 6.87.3020 6.87.3025 6.87.3030 - - 400 - 6.87.4025 6.87.4030 6.87.4035 - 500 - - 6.87.5030 6.87.5035 6.87.5040 600 - - 6.87.6030 6.87.6035 6.87.6040 700 - - 6.87.7035 6.87.7040

Feedback mounting plate

Horizontal functional space divider


57

26 Side functional space divider For vertical separation of compartments. Material: zincpassivated steel. Packs of 2

200

300

400

500

600

For enclosure For Compartment OrderCode Nr. height, mm depth, mm Vented Plain 200 6.68.2020V 6.68.2020

250 6.68.2025V 6.68.2025 300 6.68.2030V 6.68.2030 400 6.68.2040V 6.68.2040 200 6.68.3020V 6.68.3020 250 6.68.3025V 6.68.3025 300 6.68.3030V 6.68.3030 400 6.68.3040V 6.68.3040 200 6.68.4020V 6.68.4020 250 6.68.4025V 6.68.4025 300 6.68.4030V 6.68.4030 400 6.68.4040V 6.68.4040 200 6.68.5020V 6.68.5020 250 6.68.5025V 6.68.5025 300 6.68.5030V 6.68.5030 400 6.68.5040V 6.68.5040 200 6.68.6020V 6.68.6020 250 6.68.6025V 6.68.6025 300 6.68.6030V 6.68.6030 400 6.68.6040V 6.68.6040

27. Segregation panels - PlainFor vertical separation of compartments.Material: zincpassivated steel.Packs of 4

Panelheight,

mm

OrderCode Nr. Compartment width / depth, mm 300 400 500 600 700 800

200 6.77.2030 6.77.2040 6.77.2050 6.77.2060 6.77.2070 6.77.2080 250 6.77.2530 6.77.2540 6.77.2550 6.77.2560 6.77.2570 6.77.2580 300 6.77.3030 6.77.3040 6.77.3050 6.77.3060 6.77.3070 6.77.3080 400 6.77.4030 6.77.4040 6.77.4050 6.77.4060 6.77.4070 6.77.4080 500 6.77.5030 6.77.5040 6.77.5050 6.77.5060 6.77.5070 6.77.5080 600 6.77.6030 6.77.6040 6.77.6050 6.77.6060 6.77.6070 6.77.6080 700 6.77.7030 6.77.7040 6.77.7050 6.77.7060 6.77.7070 6.77.7080 800 6.77.8030 6.77.8040 6.77.8050 6.77.8060 6.77.8070 6.77.8080

Segregation panels - Plain

28. Segregation panels - VentedFor vertical separation of compartments.Material: zincpassivated steel.Packs of 4

Segregation panels - vented

Side functional space divider

Panelheight,

mm

OrderCode Nr. Compartment width / depth, mm 300 400 500 600 700 800

200 6.76.2030 6.76.2040 6.76.2050 6.76.2060 6.76.2070 6.76.2080 250 6.76.2530 6.76.2540 6.76.2550 6.76.2560 6.76.2570 6.76.2580 300 6.76.3030 6.76.3040 6.76.3050 6.76.3060 6.76.3070 6.76.3080 400 6.76.4030 6.76.4040 6.76.4050 6.76.4060 6.76.4070 6.76.4080 500 6.76.5030 6.76.5040 6.76.5050 6.76.5060 6.76.5070 6.76.5080 600 6.76.6030 6.76.6040 6.76.6050 6.76.6060 6.76.6070 6.76.6080 700 6.76.7030 6.76.7040 6.76.7050 6.76.7060 6.76.7070 6.76.7080 800 6.76.8030 6.76.8040 6.76.8050 6.76.8060 6.76.8070 6.76.8080


58

29. Terminal box Form 4b For modular outgoing section. Mount on the side.To shield the connections (terminals)of the functional space, busbar chamber and cable chamber to Form 4b.The terminal boxes are externally mounted on the functional space side panel modules in the cable chamber, to match the heights of the compartments.Material: EG steel, RAL 7035 epoxy painted.Supply includes: assembly partsPacks of 1 set.

Terminal box OrderCode Nr. for Terminal box height, mm Width Depth 150 200 250 300 400 600

250 6.88.1512 6.88.2012 6.88.2512 6.88.3012 6.88.4012 6.88.6012 150 300 6.88.1513 6.88.2013 6.88.2513 6.88.3013 6.88.4013 6.88.6013 400 6.88.1514 6.88.2014 6.88.2514 6.88.3014 6.88.4014 6.88.6014 250 6.88.1522 6.88.2022 6.88.2522 6.88.3022 6.88.4022 6.88.6022 200 300 6.88.1523 6.88.2023 6.88.2523 6.88.3023 6.88.4023 6.88.6023 400 6.88.1524 6.88.2024 6.88.2524 6.88.3024 6.88.4024 6.88.6024

Side functional space divider

59

Punched sections, rails and profi les.



60

1. Punched section 25x75 mm with mounting fl anges, Material: zincpassivated steel.Packs of 4,

2. Punched section 25x75 mm without mounting fl ange Material: zincpassivated steel. Packs of 4, including support brackets.

For enclosure OrderCode Nr. Component height/width/depth, mm length, mm

300 6.41.0300 200 400 6.41.0400 300 500 6.41.0500 400 600 6.41.0600 500 700 6.41.0700 600 800 6.41.0800 700 900 6.41.0900 800 1000 6.41.1000 900 1100 6.41.1100 1000 1200 6.41.1200 1100 1600 6.41.1600 1500 1800 6.41.1800 1700 2000 6.41.2000 1900 2200 6.41.2200 2100

3. Punched section 25x25 mm without mounting fl angeMaterial: zincpassivated steel.Packs of 4, including support brackets.

For enclosure OrderCode Nr. height/width/depth, mm

300 6.40.0300 400 6.40.0400 500 6.40.0500 600 6.40.0600 700 6.40.0700 800 6.40.0800 900 6.40.0900 1000 6.40.1000 1100 6.40.1100 1200 6.40.1200 1600 6.40.1600 1800 6.40.1800 2000 6.40.2000 2200 6.40.2200


300 6.42.0300 200 400 6.42.0400 300 500 6.42.0500 400 600 6.42.0600 500 700 6.42.0700 600 800 6.42.0800 700 900 6.42.0900 800 1000 6.42.1000 900 1100 6.42.1100 1000 1200 6.42.1200 1100 1600 6.42.1600 1500 1800 6.42.1800 1700 2000 6.42.2000 1900 2200 6.42.2200 2100

Punched section 25x75 mm with mounting fl anges,



A7 - Punched sections, rails and profi les.

61

4. Punched section 50x100 mm without mounting fl angeMaterial: zincpassivated steel.Packs of 2, including support brackets.


400 6.45.0400 300 500 6.45.0500 400 600 6.45.0600 500 700 6.45.0700 600 800 6.45.0800 700

5. Intermediate Uprights, 50x50 mm and 50x25 mm.Material: electro galvanised steel. Packs of 2 including support brackets.

For enclosure Compartment / Component OrderCode Nr. height, mm length, mm 50x50 mm 50x25 mm

1600 1500 6.44.1600 6.43.16001800 1700 6.44.1800 6.43.18002000 1900 6.44.2000 6.43.20002200 2100 6.44.2200 6.43.2200

6. Punched sections 50x50 mm and 50x25 mmMaterial: zincpassivated steel. RAL7035.Packs of 2, including support brackets.

7. Busbar supports, 25x40 mmMaterial: zincpassivated steel.Packs of 4.

For compartment Component OrderCode Nr. width/depth, mm length, mm 300 300 6.55.0300 350 350 6.55.0350 400 400 6.55.0400 450 450 6.55.0450 500 500 6.55.0500 550 550 6.55.0550 600 600 6.55.0600 700 700 6.55.0700

For enclosure Compartment / Component OrderCode Nr. width/depth, mm length, mm 50x50 mm 50x25 mm 300 200 6.60.0300 6.61.0300 400 300 6.60.0400 6.61.0400 500 400 6.60.0500 6.61.0500 600 500 6.60.0600 6.61.0600 700 600 6.60.0700 6.61.0700 800 700 6.60.0800 6.61.0800 900 800 6.60.0900 6.61.0900 1000 900 6.60.1000 6.61.1000 1100 1000 6.60.1100 6.61.1100 1200 1100 6.60.1200 6.61.1200

Intermediate Uprights


Punched sections 50x50 mm and 50x25 mm

Busbar supports, 25x40 mm8. Crosspiece, 18x40 mm

Material: zincpassivated steel.Packs of 4.

For compartment Component OrderCode Nr. width/depth, mm length, mm 300 300 6.57.0300 350 350 6.57.0350 400 400 6.57.0400 450 450 6.57.0450 500 500 6.57.0500 550 550 6.57.0550 600 600 6.57.0600 700 700 6.57.0700

Crosspiece, 18x40 mm


62

10. Cable-tie support - externalMaterial: zincpassivated steel.Packs of 10.

OrderCode Nr. For compartment width/depth, mm

200 250 300 400 500 600 6.46.0200 6.46.0250 6.46.0300 6.46.0400 6.46.0500 6.46.0600

11. Cable-tie support - internalMaterial: zincpassivated steel.Packs of 10.

OrderCode Nr. For compartment width/depth, mm

200 250 300 400 500 600 6.48.0200 6.48.0250 6.48.0300 6.48.0400 6.48.0500 6.48.0600

12. Cable guide profi les - mounting on door stiffenersMaterial: zincpassivated steel.Packs of 2.

13. System support rails.For heavy installed equipment such as transformers.T-head screws slot into the support rail for any mounting position.Material: zincpassivated steel.Packs of 2.

For door width, Component length, OrderCode Nr. mm mm

400 275 6.47.0400 500 375 6.47.0500 600 475 6.47.0600 700 575 6.47.0700 800 675 6.47.0800 900 775 6.47.0900

For enclosure width/depth mm OrderCode Nr. 500 6.51.0500 600 6.51.0600 700 6.51.0700 800 6.51.0800 900 6.51.0900 1000 6.51.1000

9. RMS - busbar SupportsMaterial: zincpassivated steel.Packs of 4 sets.

System Bar OrderCode Nr. Assembly centre distance, Enclosures width/ depth mm 600 700 800

3-pole 100 6.58.3106 6.58.3107 6.58.3108 4-pole 100 6.58.4106 6.58.4107 6.58.4108 3-pole 120 6.58.3126 6.58.3127 6.58.3128 4-pole 120 6.58.4126 6.58.4127 6.58.4128 3-pole 165 6.58.3166 6.58.3167 6.58.3168 4-pole 165 6.58.4166 6.58.4167 6.58.4168

RMS - busbar Supports

Cable-tie support - external

Cable-tie support - internal

Cable guide profi les - mounting on door stiffeners

System support rails.

A7 - Punched sections, rails and profi les.

63

14. Support rails, 32x75 mm.For heavy installations.Material: zincpassivated steel.Packs of 4.

For enclosure width/depth mm OrderCode Nr. 400 6.50.0400 500 6.50.0500 600 6.50.0600 700 6.50.0700 800 6.50.0800

15. Support rails DIN 35/7.5Material: zincpassivated steel.Packs of 6.

OrderCode Nr. For enclosure width, mm 400 500 600 700 800

6.93.0400 6.93.0500 6.93.0600 6.93.0700 6.93.0800

Support rails, 32x75 mm.

Support rails DIN 35/7.5

16. Support rails DIN 35/15Material: zincpassivated steel.Packs of 6.


6.96.0400 6.96.0500 6.96.0600 6.96.0700 6.96.0800

Support rails DIN 35/15

17 C- rails TS 30/15Material: zincpassivated steel.Packs of 6


6.97.0400 6.97.0500 6.97.0600 6.97.0700 6.97.0800

C- rails TS 30/15


64

18. Mounting bracketsMaterial: zincpassivated steel.Packs of 4

19 Depth profi lesMaterial: electro galvanised steel.RAL7035.Packs of 2.


For enclosure depth, mm OrderCode Nr. 500 6.59.0500 400 6.59.0400 500 6.59.0500 600 6.59.0600 800 6.59.0800

Mounting brackets

Depth profi les


A-8 Outdoor Enclosures


66

1. Outdoor single-walled enclosuresSingle-walled enclosure of all-round solid construction, open base,bottom gland plate, swing handle locking system, plinth and rain canopy.Material: electro galvanised steel.Finish: Painted with epoxy-polyester resin, textured RAL 7035. Optional - RAL 7032 texturedProtection category: IP 55 to EN 60 529/09.2000

2 Outdoor modular double-walled enclosuresDouble-walled, fully assembled enclosure.Consisting of welded frame, roof canopy 75 mm high, side panels and base/plinth 100mm high and gland platesMaterial: electro galvanised steel.Finish: Painted with epoxy-polyester resin, textured RAL 7035. Optional - RAL 7032 texturedProtection category: IP 55 to EN 60 529/09.2000

Enclosure dimension, mm OrderCode Nr. Number of doors height width depth

600 400 E3.806040 1 800 800 400 E3.808040 1 1200 400 E3.801240-2D 2 600 400 E3.126050 1 600 500 E3.126050 1 1200 800 400 E3.128040 1 1200 400 E3.121250-2D 2 1200 500 E3.121250-2D 2 600 400 E3.146040 1 1400 800 400 E3.148040 1 1200 400 E3.141240-2D 2

1000

1200

1600


600 500 E88.106050 1 800 500 E88.108050 1 600 600 E88.126060 1 800 500 E88.128050 1 800 600 E88.128060 1 1200 600 E88.121260-2D 2 800 600 E88.168060 1

3 Outdoor modular single-walled enclosuresSingle-walled, fully assembled enclosure.Consisting of welded frame, roof canopy 75 mm high, side panels and base / plinth 100mm high and gland platesMaterial: electro galvanised steel.Finish: Painted with epoxy-polyester resin, textured RAL 7035. Optional - RAL 7032 texturedProtection category: IP 55 to EN 60 529/09.2000

1000

1200

1600


600 500 E88.106050.SW 1 800 500 E88.108050.SW 1 600 600 E88.126060.SW 1 800 500 E88.128050.SW 1 800 600 E88.128060.SW 1 1200 600 E88.121260.SW-2D 2 800 600 E88.168060.SW 1

Outdoor modular double-walled enclosures

Outdoor single-walled enclosures


A-9 One-piece Consoles


68


960 600 400/480 E63.0600 1 960 800 400/480 E63.0800 1 960 1000 400/480 E63.1000 2 960 1200 400/480 E63.1200 2

1. Enclosure closed at the rear and sides,door or double door at the front, console lid with stay, bottom gland plate and mounting plate.Material: electro galvanised steel.Finish: Painted with epoxy-polyester resin, textured RAL 7035. Optional - RAL 7032 texturedProtection category: IP 55 to EN 60 529 complies with NEMA 12

Accessories 2. Plinths

Material: electro galvanised steel.Surface fi nish: powder-coated in texture RAL 9002. Optional RAL 7035 texture.

3. Upper SPAMaterial: electro galvanised steel. Finish: Painted with epoxy-polyester resin, textured RAL 7035. Optional - RAL 7032 textured

100 400

Plinth dimensions, mm OrderCode Nr. height width depth

600 E63.04.1064 800 E63.04.1084 1000 E63.04.1104 1200 E63.04.1264

SPA dimensions, mm OrderCode Nr. height width depth

250 600 130/180 E63.01.0600 250 800 130/180 E63.01.0800 250 1000 130/180 E63.01.1000 250 1200 130/180 E63.01.1200

E63

Plinths

Upper SPA


A-10 Substation Kiosk Enclosure

These Substation Kiosk Enclosures are available in a wide range of sizes.The Substation Kiosk is assembled as an integrated unit from specially designedand manufactured component parts.The base is built on components laser cut from heavy steel sheets. Other component parts are made from electrogalvanised steel sheet and fi nished with epoxy powder paint.

The Kiosk enclosure is divided into three compartments.

A. Medium Voltage CompartmentB. Transformer Compartment C. Low Voltage Compartment.

A-10 Substation Kiosk Enclosure


70

A10 - Substation Kiosk Enclosure

71


72

A10 - Substation Kiosk Enclosure (Rear View)


A-11 Customised Enclosures


74


A-12 Certifi cates


76


B. Electrical Distribution Boards

• Single row type A distribution boards.• Designed for safety and reliability in electrical building installation.

• Available in fl ush and surface mounting.• Available in plain and transparent doors.• Supplied without incoming device or outgoing protection device.

• Enclosure material: Electro galvanised steel.• Finishing: Epoxy powder coated, RAL 7035 texture.• Degree of protection: IP 41• Complies with: IEC 439-3 & BS 60439 part 1 & 3.

B-1 SPN Consumer units


78

1. Comby - steel fl ap version

2. Steel door version

No. of Rows No. of Modules Base dimensions, mm OrderCode Nr. height width depth Surface mounting Flush mounting

1 6 230 213 95 E50.106.0S E50.106.0F 1 8 230 249 95 E50.108.0S E50.108.0F 1 10 230 285 95 E50.110.0S E50.110.0F 1 12 230 321 95 E50.112.0S E50.112.0F 1 14 230 357 95 E50.114.0S E50.114.0F 1 16 230 393 95 E50.116.0S E50.116.0F 1 18 230 429 95 E50.118.0S E50.118.0F 1 20 230 465 95 E50.120.0S E50.120.0F

OrderCode Nr. Surface mounting Flush mounting Plain door Transparent door Plain door Transparent door

No. of Rows No. of Modules

Base dimensions, mm height width depth

1 6 250 252 90 E51.106.0S E51.106.0GS E51.106.0F E51.106.0GF 1 8 250 288 90 E51.108.0S E51.108.0GS E51.108.0F E51.108.0GF 1 10 250 324 90 E51.110.0S E51.110.0GS E51.110.0F E51.110.0GF 1 12 250 360 90 E51.112.0S E51.112.0GS E51.112.0F E51.112.0GF 1 14 250 396 90 E51.114.0S E51.114.0GS E51.114.0F E51.114.0GF 1 16 250 432 90 E51.116.0S E51.116.0GS E51.116.0F E51.116.0GF 1 18 250 468 90 E51.118.0S E51.118.0GS E51.118.0F E51.118.0GF 1 20 250 504 90 E51.120.0S E51.120.0GS E51.120.0F E51.120.0GF

E51 - SPN Consumer Units - Steel Door Version

E50 - SPN Consumer Units - Steel Flap Version

79

• Multi row type A distribution boards. • Distance between rows is 150 mm.• Designed for safety and reliability in electrical building installation.

• Available in fl ush and surface mounting.• Available in plain and transparent doors.• Supplied without incoming device or outgoing protec-tion device.

• Enclosure material: Electro galvanised steel.• Finishing: Epoxy powder coated, RAL 7035 texture.• Degree of protection: IP 41• Complies with: IEC 439-3 & BS 60439 part 1 & 3


B-2 DIN Rail Distribution Boards


80

Selection

Base dimensions, mm height width depth

1 1 x 16 300 440 115 E52.116S E52.116GS E52.116F E52.116GF 2 2 x 16 450 440 115 E52.216S E52.216GS E52.216F E52.216GF 3 3 x 16 600 440 115 E52.316S E52.316GS E52.316F E52.316GF 4 4 x 16 750 440 115 E52.416S E52.416GS E52.416F E52.416GF 5 5 x 16 900 440 115 E52.516S E52.516GS E52.516F E52.516GF 6 6 x 16 1050 440 115 E52.616S E52.616GS E52.616F E52.616GF

OrderCode Nr. Surface mounting Flush mounting Plain door Transparent door Plain door Transparent door

No. of Rows No. of Modules

E52.XXX.F DIN Rail Distribution Board E52 DIN Rail (Internal Arrangement)

E52.XXX.GS DIN Rail Distribution Board - Transparent Door

81

B-3 Circuit Breaker Enclosures

• Designed for safety and reliability in electrical building installation.

• Available in fl ush and surface mounting.• Supplied without incoming device.• Enclosure material: Electro galvanised steel.• Finishing: Epoxy powder coated, RAL 7035 texture.• Degree of protection: IP 54 ( outdoor version ), IP 41 ( indoor version ).• Supply includes: Earth and Neutral terminals.



82

1. Indoor version

2. Outdoor version

Rating Incomer Base dimensions, mm OrderCode Nr. height width depth Surface mounting Flush Mounting

30-100A MCB 350 200 80 E53.100.MS E53.100.MF 100-125A MCCB 380 200 80 E53.125.S E53.125.F 200-250A MCCB 440 280 110 E53.250.S E53.250.F 400A MCCB 600 350 170 E53.400.S E53.400.F

Rating Incomer Base dimensions, mm OrderCode Nr. height width depth Surface mounting

30-100A MCB 350 200 80 E83.100.MS 100-125A MCCB 380 200 80 E83.125.S 200-250A MCCB 440 280 110 E83.250.S 400A MCCB 600 350 170 E83.400.S

Indoor Version E53 - surface mounting

Indoor Version E53 - fl ush mounting

Outdoor Version E83

83


• Steel enclosures mounted with 5mm double bit PA locks and gland plate.

• Supplied without incoming device.• Enclosure material: Electro galvanised steel.• Finishing: Epoxy powder coated, RAL 7035 texture. Option - RAL 7032

• Degree of protection: IP 55, NEMA 4• Supply includes: Tin plated conductors, Earth and Neutral terminals and Zinc passivized mounting plate


B-4 Busbar Enclosures


84

Selection

Rating Incomer Base dimensions, mm OrderCode Nr. height width depth Surface mounting

100-125A MCCB 600 400 150 E36.125 200-250A MCCB 700 500 200 E36.250 400A MCCB 800 600 200 E36.400 630A MCCB 1000 600 250 E36.630

Note : when ordering, please state the Brand and model of breaker you intend to install in these enclosures.

Busbar Enclosure E36

85


• Steel enclosures mounted with 5mm double bit PA locks and gland plate.

• Supplied without incoming device.• Enclosure material: Electro galvanised steel.• Finishing: Epoxy powder coated, RAL 7035 texture. Option - RAL 7032

• Degree of protection: IP 41, NEMA -1• Complies with IEC 439-1 & BS 60439-1• Supply includes: Tin plated Busbar Assembly and rails chassis, Earth and Neutral terminals and Zinc passivated mounting plate


B-5 Combination Distribution Boards


86

DIN Busbar Assembly Row chassis OrderCode Nr. Amps Way Incomer No. of Row No. of module Surface mounting Flush mounting

6 E62.125A.6W.116.IS.S E62.125A.6W.116.IS.F 8 E62.125A.8W.116.IS.S E62.125A.8W.116.IS.F 10 E62.125A.10W.116.IS.S E62.125A.10W.116.IS.F 12 E62.125A.12W.116.IS.S E62.125A.12W.116.IS.F 8 E62.225A.8W.216.IS.S E62.225A.8W.216.IS.F 225A 10 Iso/ELCB 2 2 X 16 E62.225A.10W.216.IS.S E62.225A.10W.216.IS.F 12 E62.225A.12W.216.IS.S E62.225A.12W.216.IS.F

125A Iso/ELCB 1 1 x 16

Note : when ordering, please state the Brand and model of breaker you intend to install in these enclosures.

Selection

E62.125A.6W.116.IS.S E62.125A.6W.216.IS.S

87

• Designed for safety and reliability in electrical building installation.• Complies with IEC 61 439-2: 2009• KEMA Type tested rated short circuit withstand 20kA-0.25 sec.• Maximum Busbar load: 250 amps.• Steel enclosures mounted with 5mm double bit PA locks and gland plate.

Option: Die cast push lock.• Supplied without incoming and outgoing device.• Enclosure material: Electro galvanised steel.• Finishing: Epoxy powder coated, RAL 7035 texture. Option - RAL 7032• Degree of protection: IP 41, NEMA -1• Supply includes: Tin plated Busbar Assembly, Earth and Neutral terminals and Zinc passivized mounting plate

• Available in fl ush and surface mounting.


B-6 Load Centre Distribution Boards IEC Type “B” - DIN mount models


88

1. 125A TPN Load Centre matching Isolator/ELCB Incomer

2. 125A TPN Load Centre matching MCCB Incomer

385 105

No. of ways Base dimensions, mm OrderCode Nr. 1-pole 3-pole Height Width Depth Flush mounting Surface mounting

12 4 500 E56.IS.125A.4W-F E56.IS.125A.4W-S 18 6 550 E56.IS.125A.6W-F E56.IS.125A.6W-S 24 8 600 E56.IS.125A.8W-F E56.IS.125A.8W-S 30 10 650 E56.IS.125A.10W-F E56.IS.125A.10W-S 36 12 700 E56.IS.125A.12W-F E56.IS.125A.12W-S 42 14 750 E56.IS.125A.14W-F E56.IS.125A.14W-S 48 16 800 E56.IS.125A.16W-F E56.IS.125A.16W-S

385 105


12 4 550 E56.MCCB.125A.4W-F E56.MCCB.125A.4W-S 18 6 600 E56.MCCB.125A.6W-F E56.MCCB.125A.6W-S 24 8 650 E56.MCCB.125A.8W-F E56.MCCB.125A.8W-S 30 10 700 E56.MCCB.125A.10W-F E56.MCCB.125A.10W-S 36 12 750 E56.MCCB.125A.12W-F E56.MCCB.125A.12W-S 42 14 800 E56.MCCB.125A.14W-F E56.MCCB.125A.14W-S 48 16 850 E56.MCCB.125A.16W-F E56.MCCB.125A.16W-S

3. 250A TPN Load Centre matching MCCB Incomer

385 105


18 6 600 E56.MCCB.225A.6W-F E56.MCCB.225A.6W-S 24 8 650 E56.MCCB.225A.8W-F E56.MCCB.225A.8W-S 30 10 700 E56.MCCB.225A.10W-F E56.MCCB.225A.10W-S 36 12 750 E56.MCCB.225A.12W-F E56.MCCB.225A.12W-S 42 14 800 E56.MCCB.225A.14W-F E56.MCCB.225A.14W-S 48 16 850 E56.MCCB.225A.16W-F E56.MCCB.225A.16W-S 54 18 900 E56.MCCB.225A.18W-F E56.MCCB.225A.18W-S

E56 - TPN Load Centre -MCCB Incomer

E56 - TPN Load Centre -ISO/ELCB Incomer

B6 - Load Centres Distribution Boards

89

4. Split Load Centre matching Isolator/ELCB Incomer - 125A

Note : when ordering, please state the Brand and model of breaker you intend to install in these enclosures. In case you wish to have the door to be installed with a keyed metal lock, add “ PKL “ to your OrderCode Nr.

5. IP 65 Outdoor Load Centre Enclosure with gland plate in the base. Door hinge on the right , may be swapped to opposite side.Door gasketed with all-round foamed-in PU seal.Material: Electro galvanised steel. Mounting plate: Zinc plated.Surface fi nish: powder-coated in texture RAL 7035. Optional RAL 7032 texture.Protection category: IP65 to EN 60 529/09.2000 com-plies with NEMA 4.Surface mounting only.

400 150

No. of ways Base dimensions, mm OrderCode Nr. 1-pole 3-pole Height Width Depth Main isolator incomer 125A MCCB incomer 250A MCCB incomer

12 4 550 E56.IS.125A.4W-IP E56.MCCB.125A.4W-IP E56.MCCB.225A.4W-IP 18 6 600 E56.IS.125A.6W-IP E56.MCCB.125A.6W-IP E56.MCCB.225A.6W-IP 24 8 650 E56.IS.125A.8W-IP E56.MCCB.125A.8W-IP E56.MCCB.225A.8W-IP 30 10 700 E56.IS.125A.10W-IP E56.MCCB.125A.10W-IP E56.MCCB.225A.10W-IP 36 12 750 E56.IS.125A.12W-IP E56.MCCB.125A.12W-IP E56.MCCB.225A.12W-IP 42 14 800 E56.IS.125A.14W-IP E56.MCCB.125A.14W-IP E56.MCCB.225A.14W-IP 48 16 850 E56.IS.125A.16W-IP E56.MCCB.125A.16W-IP E56.MCCB.225A.16W-IP 54 18 900 E56.IS.125A.18W-IP E56.MCCB.125A.18W-IP E56.MCCB.225A.18W-IP

No. of ways OrderCode Nr. 3-pole 3-pole Flush mounting Surface mounting

2 2 E56.IS.125A.2+2W-F E56.IS.125A.2+2W-S 2 4 E56.IS.125A.2+4W-F E56.IS.125A.2+4W-S 4 4 E56.IS.125A.4+4W-F E56.IS.125A.4+4W-S 2 6 E56.IS.125A.2+6W-F E56.IS.125A.2+6W-S 4 6 E56.IS.125A.4+6W-F E56.IS.125A.4+6W-S 6 6 E56.IS.125A.6+6W-F E56.IS.125A.6+6W-S 4 8 E56.IS.125A.4+8W-F E56.IS.125A.4+8W-S 6 8 E56.IS.125A.6+8W-F E56.IS.125A.6+8W-S 8 8 E56.IS.125A.8+8W-F E56.IS.125A.8+8W-S 4 12 E56.IS.125A.4+12W-F E56.IS.125A.4+12W-S

E56 - Split Load Centre matching Isolator/ELCB Incomer - 125A

IP65 Outdoor load centre


90

6 Mini Centre compact Distribution BoardsDesigned for safety and reliability in electrical building installation.Complies with IEC 61 439-2 :2009KEMA Type tested rated short circuit withstand 20kA-0.25 sec.Maximum Busbar load: 250 amps.Steel enclosures mounted with die cast key lock(s).Supplied without incoming and outgoing device.Enclosure material: Electro galvanised steel.Finishing: Epoxy powder coated, RAL 7035 texture. Option - RAL 7032Degree of protection: IP 42, NEMA -1Supply includes: Tin plated Busbar Assembly, Earth and Neutral terminals and Zinc passivized mounting plateSurface mounting only. Flush on request.

No. of ways Base dimensions, mm OrderCode Nr. 1-pole 3-pole Height Width Depth Isolator/ELCB incomer 125A MCCB incomer 250A MCCB incomer

12 4 502 E86.IS.125A.4W E86.MCCB.125A.4W E86.MCCB.225A.4W 18 6 560 E86.IS.125A.6W E86.MCCB.125A.6W E86.MCCB.225A.6W 24 8 610 E86.IS.125A.8W E86.MCCB.125A.8W E86.MCCB.225A.8W 36 12 718 400 125 E86.IS.125A.12W E86.MCCB.125A.12W E86.MCCB.225A.12W 48 16 830 E86.IS.125A.16W E86.MCCB.125A.16W E86.MCCB.225A.16W 60 20 1001 E86.IS.125A.20W E86.MCCB.125A.20W E86.MCCB.225A.20W 72 24 1140 E86.IS.125A.24W E86.MCCB.125A.24W E86.MCCB.225A.24W

Mini Centre compact Distribution Boards

91


• Complies with NEMA UL 50 & 67 & IEC 60529: 1989-11• Maximum Busbar load: 250 amps.• Steel enclosures mounted with 5mm double bit PA locks and gland plate. Option : Die cast push lock.

• Supplied without incoming and outgoing device.• Enclosure material: Electro galvanised steel.• Finishing: Epoxy powder coated, RAL 7035 texture. Option - RAL 7032

• Degree of protection: IP 41, NEMA -1• Supply includes: Tin plated Busbar Assembly, Earth and Neutral terminals and Zinc passivized mounting plate

• Available in fl ush and surface mounting.


B-7 Load Centres Distribution Boards NEMA Type “A” - Plug-in models


92

1. 125A TPN Load Centre matching Isolator/ELCB Incomer

No. of ways Base dimensions, mm OrderCode Nr. (Surface Mounting) 1-pole 3-pole Height Width Depth WIWO incomer 125A MCCB incomer 250A MCCB incomer

12 4 591 E57-12100W.S E57-L12100.S E57-L12225.S 18 6 667 E57-18100W.S E57-L18100.S E57-L18225.S 24 8 743 E57-24100W.S E57-L24100.S E57-L24225.S 30 10 848 343 105 E57-30100W.S E57-L30100.S E57-L30225.S 36 12 930 E57-36100W.S E57-L36100.S E57-L36225.S 42 14 1010 E57-42100W.S E57-L42100.S E57-L42225.S 48 16 1090 E57-48100W.S E57-L48100.S E57-L48225.S

No. of ways Base dimensions, mm OrderCode Nr. (Flush Mounting) 1-pole 3-pole Height Width Depth WIWO incomer 125A MCCB incomer 250A MCCB incomer

12 4 591 E57-12100W.F E57-L12100.F E57-L12225.F 18 6 667 E57-18100W.F E57-L18100.F E57-L18225.F 24 8 743 E57-24100W.F E57-L24100.F E57-L24225.F 30 10 848 343 105 E57-30100W.F E57-L30100.F E57-L30225.F 36 12 930 E57-36100W.F E57-L36100.F E57-L36225.F 42 14 1010 E57-42100W.F E57-L42100.F E57-L42225.F 48 16 1090 E57-48100W.F E57-L48100.F E57-L48225.F

2. Outdoor versionEnclosure with gland plate in the base. Door hinge on the right , may be swapped to opposite side.Door gasketed with all-round foamed-in PU seal.Material: Electro galvanised steel. Mounting plate: Zinc plated.Surface fi nish: powder-coated in texture RAL 7035. Optional RAL 7032 texture.Protection category: IP65 to EN 60 529/09.2000 complies with NEMA 4.Surface mounting only.

TPN Load Centre

No. of ways Base dimensions, mm OrderCode Nr. (Surface Mounting) 1-pole 3-pole Height Width Depth WIWO incomer 125A MCCB incomer 250A MCCB incomer

12 4 550 E75-12100.IP E75-L12100.IP E75-L12225.IP 18 6 600 E75-18100.IP E75-L18100.IP E75-L18225.IP 24 8 650 E75-24100.IP E75-L24100.IP E75-L24225.IP 30 10 700 400 150 E75-30100.IP E75-L30100.IP E75-L30225.IP 36 12 750 E75-36100.IP E75-L36100.IP E75-L36225.IP 42 14 800 E75-42100.IP E75-L42100.IP E75-L42225.IP 48 16 850 E75-48100.IP E75-L48100.IP E75-L48225.IP

Outdoor version

93

• Complies with IEC 61 439-1 : 1999 + A1 : 2004• KEMA Type Tested rated short circuit withstand 35kA ( 73kA peak ) for 1.0 second.• Designed for safety and reliability in electrical building installation.

• Supplied without incoming and outgoing device.• Enclosure material: Electro galvanised steel.• Finishing: Epoxy powder coated, RAL 7035 texture. Option - RAL 7032

• Degree of protection: IP 41, NEMA -1• Supply includes: Tin plated Busbar Assembly, Earth and Neutral terminals and Zinc passivized mounting plate

• Available in surface mounting.


B-8 Sub Main Distribution Boards


94

a. 250A panel boards : Maximum outgoing 160A

b. 400A panel boards : Maximum outgoing 160A

C. 630A panel boards : Maximum outgoing 160A

d. 400A panel boards : Maximum outgoing 250A

e. 630A panel boards : Maximum outgoing 250A

Outgoing OrderCode Nr. Dimensions, mm Ways, TP MCCB frame width Height Width Depth

6 V55.630MD-06-225MD-P35 1335 8 V55.630MD-08-225MD-P35 1440 10 V55.630MD-10-225MD-P35 1545 12 V55.630MD-12-225MD-P35 1650 14 V55.630MD-14-225MD-P35 1755 16 V55.630MD-16-225MD-P35 1860

105 mm 800 190

Note : when ordering, please state the Brand and model of breakers you intend to install in these enclosures.

1. Version A


4 V55.400MD-04-225MD-P35 1115 6 V55.400MD-06-225MD-P35 1210 8 V55.400MD-08-225MD-P35 1315 10 105 mm V55.400MD-10-225MD-P35 1420 800 190 12 V55.400MD-12-225MD-P35 1525 14 V55.400MD-14-225MD-P35 1630 16 V55.400MD-16-225MD-P35 1735

75 mm 800 190


6 V55.630MD-06-125MD-P25 1317 8 V55.630MD-08-125MD-P25 1392 10 V55.630MD-10-125MD-P25 1467 12 V55.630MD-12-125MD-P25 1542 14 V55.630MD-14-125MD-P25 1617 16 V55.630MD-16-125MD-P25 1692


4 V55.400MD-04-125MD-P25 1000 6 V55.400MD-06-125MD-P25 1077 8 V55.400MD-08-125MD-P25 1154 10 75 mm V55.400MD-10-125MD-P25 1231 800 190 12 V55.400MD-12-125MD-P25 1308 14 V55.400MD-14-125MD-P25 1383 16 V55.400MD-16-125MD-P25 1458


4 V55.250MD-04-125MD-P25 808 6 V55.250MD-06-125MD-P25 903 8 75 mm V55.250MD-08-125MD-P25 980 800 190 10 V55.250MD-10-125MD-P25 1057 12 V55.250MD-12-125MD-P25 1134

V55 - Panel Boards Version A

V55 - Panel Boards Version A

B8 - Sub Main Distribution Boards

95

2. Version B

Accessories

OrderCode Nr. Box dimensions, mm Plain cover type Meter cut-out cover type Height Width Depth

V55.208019 V55.208019.M 200 800 190

f. Top /Bottom extension box

g. Side extension box : designed suitable to be mounted on the left side as well as on the right side of the enclosure.

When ordering, please indicate height of the box required. Box is of standard width of 200 mm and depth of 190 mm.


4 E55.250MD-04-125MD-P25 808 6 E55.250MD-06-125MD-P25 903 8 75 mm E55.250MD-08-125MD-P25 980 750 160 10 E55.250MD-10-125MD-P25 1057 12 E55.250MD-12-125MD-P25 1134

a. 250A panel boards : Maximum outgoing 160A


4 E55.400MD-04-125MD-P25 1000 6 E55.400MD-06-125MD-P25 1077 8 E55.400MD-08-125MD-P25 1154 10 75mm E55.400MD-10-125MD-P25 1231 750 160 12 E55.400MD-12-125MD-P25 1308 14 E55.400MD-14-125MD-P25 1383 16 E55.400MD-16-125MD-P25 1458

b. 400A panel boards : Maximum outgoing 160A

V55 - Panel Boards Version A with side mounting

E55 - Panel Boards Version B

V55 - Top / Bottom extension box


96

C. 630A panel boards : Maximum outgoing 160A


6 E55.630MD-06-125MD-P25 1317 8 E55.630MD-08-125MD-P25 1392 10 E55.630MD-10-125MD-P25 1467 12 E55.630MD-12-125MD-P25 1542 14 E55.630MD-14-125MD-P25 1617 16 E55.630MD-16-125MD-P25 1692

75 mm 750 160

d. 400A panel boards : Maximum outgoing 250A

e. 630A panel boards : Maximum outgoing 250A

OrderCode Nr. E55.1275.M

Accessories f. Front meter panel


4 E55.400MD-04-225MD-P35 1115 6 E55.400MD-06-225MD-P35 1210 8 E55.400MD-08-225MD-P35 1315 10 105 mm E55.400MD-10-225MD-P35 1420 750 160 12 E55.400MD-12-225MD-P35 1525 14 E55.400MD-14-225MD-P35 1630 16 E55.400MD-16-225MD-P35 1735

105 mm 750 160



6 E55.630MD-06-225MD-P35 1335 8 E55.630MD-08-225MD-P35 1440 10 E55.630MD-10-225MD-P35 1545 12 E55.630MD-12-225MD-P35 1650 14 E55.630MD-14-225MD-P35 1755 16 E55.630MD-16-225MD-P35 1860

E55 - Front meter panel

E55 - View without front panel

B8 - Sub Main Distribution Boards

97

3. Version C

E85 - MCCB panel boards

C. 630A panel boards: Maximum outgoing 160A



b. 400A panel boards: Maximum outgoing 160A



a. 250A panel boards: Maximum outgoing 160A



e. 630A panel boards: Maximum outgoing 250A


105 mm 800 210


6 E85.630MD-06-225MD-P35 1210 8 E85.630MD-08-225MD-P35 1440 12 E85.630MD-12-225MD-P35 1650 16 E85.630MD-16-225MD-P35 1860

d. 630A panel boards: Maximum outgoing 160A




98

Note : supply does not include meters and lamps.

Type

Plain

Meter cut-outs200 210

OrderCode Nr. Dimensions, mm Top extension box Bottom extension box Height Width Depth

E85.15.750.0 E85.04.750.0 750 E85.15.800.0 E85.04.800.0 800 E85.15.750.M - 750 E85.15.800.M - 800

Accessories

E85 - Top Bottom extension box


B-9 Busbars

1. Three-pole Final Distribution Board Busbar Assembly - Type B.

Complies with IEC 61 439-2 :2009KEMA Type tested rated short circuit withstand 20kA - 0.25 sec.Tin plated 99.99% copper busbar shrouded in heavy duty high temperature engineering plastics.Supply does not include GI tray nor copper link.

Number of way OrderCode Nr. 125A Type 250A Type

2 BBA.125.2W.DIN BBA.225.2W.DIN 4 BBA.125.4W.DIN BBA.225.4W.DIN 6 BBA.125.6W.DIN BBA.225.6W.DIN 8 BBA.125.8W.DIN BBA.225.8W.DIN 10 BBA.125.10W.DIN BBA.225.10W.DIN 12 BBA.125.12W.DIN BBA.225.12W.DIN 14 BBA.125.14W.DIN BBA.225.14W.DIN 16 BBA.125.16W.DIN BBA.225.16W.DIN 18 BBA.125.18W.DIN BBA.225.18W.DIN 20 BBA.125.20W.DIN BBA.225.20W.DIN

E56 -Three-pole Final Distribution Board Busbar Assembly - Type B

2. Sub Main Busbar AssemblyComplies with IEC 61 439-1 : 1999 + A1 : 2004KEMA Type Tested rated short circuit withstand 35kA ( 73kA peak ) for 1.0 second.Tin plated 99.99% copper busbar shrouded in heavy duty high temperature engineering plastics.Supply does not include mounting brackets, spreader nor copper link.

a. Main busbar assembly

Number of way OrderCode Nr. 250A 400A 630A

4 E55.250W04.P25 E55.400W04.P25 E55.630W04.P25 6 E55.250W06.P25 E55.400W06.P25 E55.630W06.P25 8 E55.250W08.P25 E55.400W08.P25 E55.630W08.P25 10 E55.250W10.P25 E55.400W10.P25 E55.630W10.P25 12 E55.250W12.P25 E55.400W12.P25 E55.630W12.P25 Main Terminal Copper Section 6.0 x 25.0 mm 10.0 x 25.0 mm 12.7 x 32.0 mm

Outgoing MCCB frame of 75 mm



4 E55.250W04.P30 E55.400W04.P30 E55.630W04.P30 6 E55.250W06.P30 E55.400W06.P30 E55.630W06.P30 8 E55.250W08.P30 E55.400W08.P30 E55.630W08.P30 10 E55.250W10.P30 E55.400W10.P30 E55.630W10.P30 12 E55.250W12.P30 E55.400W12.P30 E55.630W12.P30 Main Terminal Copper Section 6.0 x 25.0 mm 10.0 x 25.0 mm 12.7 x 32.0 mm E55 - Main busbar assembly


100

Note : when ordering please indicate the Brand and model of the breakers you intend to install in the Busabar Assembly.



4 E55.250W04.P35 E55.400W04.P35 E55.630W04.P35 6 E55.250W06.P35 E55.400W06.P35 E55.630W06.P35 8 E55.250W08.P35 E55.400W08.P35 E55.630W08.P35 10 E55.250W10.P35 E55.400W10.P35 E55.630W10.P35 12 E55.250W12.P35 E55.400W12.P35 E55.630W12.P35 Main Terminal Copper Section 6.0 x 25.0 mm 10.0 x 25.0 mm 12.7 x 32.0 mm

b. Extension busbar assembly


Note : when ordering please indicate the Brand and model of the breakers you intend to install in the Busabar Assembly.


4 E55E.250W04.P35 E55E.400W04.P35 E55E.630W04.P35 6 E55E.250W06.P35 E55E.400W06.P35 E55E.630W06.P35 8 E55E.250W08.P35 E55E.400W08.P35 E55E.630W08.P35 10 E55E.250W10.P35 E55E.400W10.P35 E55E.630W10.P35 12 E55E.250W12.P35 E55E.400W12.P35 E55E.630W12.P35 Main Terminal Copper Section 6.0 x 25.0 mm 10.0 x 25.0 mm 12.7 x 32.0 mm







E55 - Extension busbar assembly


B-10 Certifi cates - Type tests


102


C. IT Enclosures

• Flat-packed enclosure• Supply includes: wall section, basic supports, roof/base plates with cut-outs for cable entry, 19” mounting angles, levelling feet ( from 12U ), side panels, glazed door, lockable, hinges and assembly fasteners.• Material: Electro-galvanised steel.• Finish: Epoxy powder coated RAL 9002 texture. Option: RAL 7035.

C-1 FlatBox wall-mounted and fl oor-standing enclosure

Selection

U 6 9 6 9 12 15 12 15 18 21

Height, mm 360 500 360 500 630 760 630 760 900 1030 Width, mm 600 600 600 600 600 600 600 700 700 700 Depth, mm 400 400 600 600 400 400 600 700 700 700 OrderCode Nr. E70.066040 E70.096040 E70.066060 E70.096060 E70.126040 E70.156040 E70.126060 E70.157070 E70.187070 E70.217070

C - IT EnclosuresC

104 Premium Quality - Value Price

• Developed specially for small networks, secondary distributions and fl oor standing.

• Side panels and door are detachable. Equipment are accessible from three sides.

• Cut-outs at top and bottom surface. • Glazed door with security lock, 19” mounting angles, infi nitely depth-variable.

• Material: Electro-galvanised steel.• Finish: Epoxy powder coated RAL 9002 texture. Option: RAL 7035.

C-2 Wall Mount 19” Rack, Model E1

Selection

U 6 9 6 9 12 12 15 15 15 18 18 21 21

Height, mm 360 500 360 500 630 630 760 760 760 900 900 1030 1030 Width, mm 600 600 600 600 600 600 600 600 600 600 600 600 600 Depth, mm 400 400 500 500 400 500 400 500 600 400 600 400 600 OrderCode Nr. E1.065040 E1.096040 E1.066050 E1.096050 E1.126040 E1.126050 E1.156040 E1.156050 E1.156060 E1.186040 E1.186060 E1.216040 E1.216060

105

C - IT EnclosuresC


• Wall section with punched rails and C rail mounted horizontally for cable clamping.

• Bottom provided with cut-out for cable entry.• Hinged part provided with 25 mm hole patterns in the front and rear frame.

• 19” mounting angles mounted on C rails, infi nitely depth variable.


• Protection category: IP 43 to EN 60 529 when unit is mounted with solid gland plate.

C-3 Two-section Wall Mount 19” Enclosure, model E11

U 6 9 12 15 18 21

Height, mm 350 500 620 750 880 1015 Width, mm 600 600 600 600 600 600 Depth, mm 475 475 475 475 475 475 OrderCode Nr. E11.06.475 E11.09.475 E11.12.475 E11.15.475 E11.18.475 E11.21.475

Selection

C - IT EnclosuresC


• Based on the VS9000 enclosures.• Unit can be fi tted with 19” mounting angles, infi nitely depth-variable or

fi tted with 19” swing frame. • Finish: Epoxy powder coated RAL 7035 texture. Option: RAL 7032.

• Protection category: IP 65 to EN 60 529.

C-4 IP65 Wall Mount 19” Enclosures, model E19

Selection

Fixed 19” frame 19” swing frame

U 8 12 16 6 11 14

Height, mm 400 600 800 400 600 800 Width, mm 600 600 600 600 600 600 Depth, mm 350 350 350 400 400 400 OrderCode Nr. E19.0835.FF E19.1235.FF E19.1635.FF E19.0640.SF E19.1140.SF E19.1440.SF

107

C - IT EnclosuresC


C-5 IT server fl exiRack, model E7

• Welded frame punched with 25mm hole pattern.• Top and bottom frame surfaces come with cut-outs.• Frames are bay able side-to- side.• Material: Electro-galvanised steel.• Finish: Epoxy powder coated RAL 7035 texture. Option: RAL 9002.• Supply includes: Glazed front door, electro galvanised steel rear door, levelling

feet, swing handle key alike lock on the front and swivel keyed lock at the perforated rear door.

• Detachable side panels, 19” mounting angles and depth stays.

Selection

U 24 24 38 42 42 47 Height, mm 1200 1200 1800 2000 2000 2200 Width, mm 600 600 600 600 600 600 Depth, mm 600 1000 600 600 1000 1000 OrderCode Nr. E7.1266 E7.1260 E7.1866 E7.2066 E7.2060 E7.2260


C - IT EnclosuresC


• A pair of self-supporting 19” frame structure, Glazed door at the front come with swing handle key alike lock, two-point locking rod.

• Plug-in side panels with lock- optional• Base frame with cut-outs.• Roof plate for cable entry cut-out.• Perforated rear door.• Levelling feet.• Material: Electro-galvanised steel.• Finish: Epoxy powder coated RAL 7035 texture. Option: RAL 9005.

C-6 Network Enclosures, based on VS7000

1 Without side panel including baying kit,

2. Including side panels

U 24 24 42 42 47 47 Height, mm 1200 1200 2000 2000 2200 2200 Width, mm 600 600 600 600 600 600 Depth, mm 600 800 600 800 600 800 OrderCode Nr. E70.2466.0 E70.2468.0 E70.4266.0 E70.4268.0 E70.4766.0 E70.4768.0

U 24 24 42 42 47 47 Height, mm 1200 1200 2000 2000 2200 2200 Width, mm 800 800 800 800 800 800 Depth, mm 600 800 600 800 600 800 OrderCode Nr. E70.2486.0 E70.2488.0 E70.4286 E70.4288.0 E70.4786.0 E70.4788.0




• Welded frame. Option: Flat pack version.• Frame bay able on all sides,• Supply includes: Enclosure frame with front glazed door and rear plain door, roof panel with cut-out,

L 19” mounting angles at the front and rear, 19” depth stay punched profi les, one-piece gland plate.


• Protection category: IP 55 to EN 60 529.

C-7 Network enclosures, based on EP8000

C - IT EnclosuresC

110

1 Welded frame version. Without side panel, including rear door and swing handle key alike lock.

U 24 38 42 47 Height, mm 1200 1800 2000 2200 Width, mm 600 800 800 800 Depth, mm 600 800 800 800 OrderCode Nr. 6.126060.V3 6.188080.V3 6.208080.V3 6.228080.V3

U 24 42 42 47 47 Height, mm 1200 2000 2000 2200 2200 Width, mm 800 800 800 800 800 Depth, mm 900 900 1000 900 1000 OrderCode Nr. 6.128090.V3 6.208090.V3 6.208010.V3 6.228090.V3 6.228010.V3

2 Flat pack version. Without side panel, including rear door and swing handle key alike lock.

U 24 42 42 47 47 Height, mm 1200 2000 2000 2200 2200 Width, mm 800 800 800 800 800 Depth, mm 900 900 1000 900 1000 OrderCode Nr. 6.128090.FP 6.208090.FP 6.208010.FP 6.228090.FP 6.228010.FP

U 24 38 42 47 Height, mm 1200 1800 2000 2200 Width, mm 600 800 800 800 Depth, mm 600 800 800 800 OrderCode Nr. 6.126060.FP 6.188080.FP 6.208080.FP 6.228080.FP

Welded frame version.

C7 - Network Enclosures, based on EP8000

111

2. Levelling feetTo compensate for height differences with fl oor iregularities.Packs of 4.

Accessories :


3. Plinth/base components, vented front and rear.Surface fi nish: powder-coated in texture RAL 9002. Optional RAL 7035 texture.Supply includes: 4 corners and 2 cross channels.

Enclosure OrderCode Nr. width, mm 100 mm high

600 6.20.1060V 800 6.20.1080V

4. Plinth/base - side trimSurface fi nish: powder-coated in texture RAL 9002. Optional RAL 7035 texture.Supply includes: 2 trim channels ( 4 trim channels in case of 200mm high plinth )

Enclosure OrderCode Nr. Depth, mm 100 mm high

600 6.21.1060 800 6.21.1080 900 6.21.1090 1000 6.21.1010

5. Side panels. Packs of 2.

Enclosure dimensions, mm OrderCode Nr. height depth Plain version

1200 600 6.11.1260 900 6.11.1290 1800 800 6.11.1880 800 6.11.2080 2000 900 6.11.2090 1000 6.11.2010 800 6.11.2280 2200 900 6.11.2290 1000 6.11.2210

Levelling feet

Plinth/base - side trim

Plinth/base components, vented front and rear.

Side panels.

C - IT EnclosuresC

112

6. SpacersFor roof panel.To raise the roof for ventilation purposes, in three different heights.Packs of 4.


7. 19” swing framesMaterial: electro galvanised steel.Supplied with fi xing accessories.Packs of 1 set.

For enclosure For enclosure For Compartment OrderCode Nr Height, mm Width, mm Width, mm Installed centre Installed offset 700 600 6.37.1270C 6.37.1270S 800 700 6.37.1280C 6.37.1280S 700 600 6.37.1870C 6.37.1870S 800 700 6.37.1880C 6.37.1880S 700 600 6.37.2070C 6.37.2070S 800 700 6.37.2080C 6.37.2080S 700 600 6.37.2270C 6.37.2270S 800 700 6.37.2280C 6.37.2280S

1200

1800

2000

2200

Spacers

19” swing frames

113

• Welded rack frame with 25 mm system increments. • Top and bottom frame are passively ventilated.• Perforated rear door with security lock.• Tripartite front with security locking.• Monitor bay mounted with fi xed shelf depth 500 mm.• Monitor door installed with 4 mm safety glass. • Keyboard pull-out tray, 400 mm deep.• Side panels with security lock.• Material: Basic welded frame & doors manufactured

from 1.5 mm electro-galvanised sheet steel. Top and bottom frame manufactured from, 2.0 mm

electro-galvanised sheet steel.


C-8 Klasik Rack model E37

Side panels manufactured from 1.2 mm electro-galvanised sheet steel.

• Finish: Epoxy polyester textured powder paint, RAL7035.

• Supply includes: x1 Welded frame. x1 Fixed shelf 400/500 mm deep installed in the monitor bay. x2 Side panels. x1 Keyboard pull-out tray, 400 mm deep. x4 Adjusting leveling feet.

C - IT EnclosuresC

114

Selection

Rack Dimension, mm OrderCode Nr. Height Width Depth U height

1600 600 33U E37.1666 600 800 E37.1668 1800 600 38U E37.1866 800 E37.1868


C-9 Network Enclosures, based on VS8000

Side panels manufactured from 1.2 mm electro-galvanised sheet steel.

• Finish: Epoxy polyester textured powder paint, RAL7035.

• Supply includes: x1 Welded frame. x1 Fixed shelf 400/500 mm deep installed in the monitor bay. x2 Side panels. x1 Keyboard pull-out tray, 400 mm deep. x4 Adjusting leveling feet.

C - IT EnclosuresC

116

1. Welded frame Frame bay able side-to-side.Supply includes: Enclosure frame with front glazed door and rear plain panel,roof panel with cut-out.3-pc gland plates, depth profi les.Material: Electro-galvanized steel.Finish: Epoxy powder coated RAL 7035 textureOption: RAL 9005Protection category: IP 55 to EN 60 529

2. Welded frame Frame bay able side-to-side.Supply includes: Enclosure frame with front glazed door and rear plain door,roof panel with cut-out.3-pc gland plates, depth profi les.Material: Electro-galvanized steel.Finish: Epoxy powder coated RAL 7035 textureOption: RAL 9005Protection category: IP 55 to EN 60 529

U 24 38 42 47 Height, mm 1200 1800 2000 2200 Width, mm 600 800 800 800 Depth, mm 600 800 800 800 OrderCode Nr. E78.1266 E78.1888 E78.2080 E78.2288

U 24 42 42 47 47 Height, mm 1200 2000 2000 2200 2200 Width, mm 800 800 800 800 800 Depth, mm 900 900 1000 900 1000OrderCode Nr. E78.1289 E78.2089 E78.2080 E78.2289 E78.2280

U 24 38 42 47 Height, mm 1200 1800 2000 2200 Width, mm 600 800 800 800 Depth, mm 600 800 800 800 OrderCode Nr. E78.1266-RD E78.1888-RD E78.2080-RD E78.2288-RD

U 24 42 42 47 47 Height, mm 1200 2000 2000 2200 2200 Width, mm 800 800 800 800 800 Depth, mm 900 900 1000 900 1000OrderCode Nr. E78.1289-RD E78.2089-RD E78.2080-RD E78.2289-RD E78.2280-RD

Welded frame

C9 - Network Enclosures, based on VS8000

117

Accessories:

3. Side Panels Material: Electro-galvanized steel.Surface fi nish: powder coated in texture RALPacks of 2.

4. Rear doors Mounted with door stiffeners, swing handle key alike locking system.Packs of 1.

Enclosure dimensions, mm OrderCode Nr. height depth Plain version

1200 600 E8.01.126 900 E8.01.129 1800 800 E8.01.188 800 E8.01.208 2000 900 E8.01.209 1000 E8.01.200 800 E8.01.228 2200 900 E8.01.228 1000 E8.01.220

Door OrderCode Nr Height, mm Width, mm Plain door Vented door 600 E8.06.126 E8.06.126.V 800 E8.06.128 E8.06.128.V 600 E8.06.186 E8.06.186.V 800 E8.06.188 E8.06.188.V 600 E8.06.206 E8.06.206.V 800 E8.06.208 E8.06.208.V 600 E8.06.226 E8.06.226.V 800 E8.06.228 E8.06.228.V

1200

1800

2000

2200

Side Panels

Rear doors

C - IT EnclosuresC

118

6. 19” fi xed frames Material: Electro-galvanized steel.Supplied with fi xing accessories.Packs of 1 set.

1200

1800

2000

2200

For enclosure OrderCode Nr Height, mm Width, mm Installed centre 600 E8.38.1260 800 E8.38.1280 600 E8.38.1860 800 E8.38.1880 600 E8.38.2060 800 E8.38.2080 600 E8.38.2260 800 E8.38.2280

5. 19” swing frames Material: Electro-galvanized steel.Supplied with fi xing accessories.Packs of 1 set.

For enclosure OrderCode Nr Height, mm Width, mm Installed centre Installed offset 1200 E8.76.122 E8.76.121 1800 E8.76.182 E8.76.181 2000 E8.76.202 E8.76.201 2200 E8.76.222 E8.76.221

800

9” fi xed frames

19” swing frames

C9 - Network Enclosures, based on VS8000

119

8. Spacers For roof panel.To raise the roof for ventilation purposes, in three different heights.Packs of 4.

7. 19” Panels Material: Electro-galvanized steel.Packs of 4.


Spacers - for roof panel

9. Lifting Eyebolts, M12 Packs of 4.


10. Lifting angle bracketsPacks of 4.


Panel OrderCode Nr U Height Plain Vented 1 E4.910.0 E4.910.1 1.5 E4.915.0 E4.915.1 2 E4.920.0 E4.920.1 3 E4.930.0 E4.930.1 4 E4.940.0 E4.940.1 5 E4.950.0 E4.950.1

Lifting angle brackets

19” Panels

11. Plinths, height 100mmMaterial: Electro-galvanized steel.Surface fi nish: powder coated in texture RAL 9002. Optional RAL 7035 textured.

Plinths, height 100mm

Enclosure dimension, mm OrderCode Nr Height Width Plain Vented (front & rear panels) 600 600 E8.04.1066 E8.04.1066V 800 E8.04.1088 E8.04.1088V 800 900 E8.04.1089 E8.04.1089V 1000 E8.04.1080 E8.04.1080V

Lifting Eyebolts, M12

C - IT EnclosuresC

120

16. Levelling feetTo compensate for height differences with fl oor irregularities.Packs of 4.


15. Spray touch-up paint - aerosol can


Spray touch-up paint.

14. Compact fl uorescent lamp, 220V/50Hz,60W c/w switch and mounting brackets Packs of 1 set.


Compact fl uorescent lamp

Levelling feet

Levelling feet

12. Door retainerHolds the door open at 120 degree to avoid accidental closing.Packs of 1 set.


Door retainer

13. Door switch c/w mounting bracketsPacks of 1 set.


Door switch c/w mounting brackets

121

D-1 Heavy Duty Drawer Cabinets

• Made from steel and suitable for arduous workshop conditions. Features:• Cabinet housings are made of electrogalvanised steel sheets

and fully welded to ensure integrity of shape and high loading capacity.

• Epoxy powder coated in modern dual colors, gray RAL 7001 for housings and blue RAL 5015 for fronts.

• All drawers are fi xed with individual safety trigger.• Central locking of all drawer stacks.• Full width handles.• Drawers glide easily on steel bearings even when loaded to 100

kg UDL capacity.• Drawer space utilisation is greatly enhanced by the use of

metal partitions and dividers• Universal in application : for storing tools and machines;

components and materials


D. Industrial Storage Equipment

Selection

Dimensions, mm Cabinet Drawer Combination, Height and Units OrderCode Nr. Width Depth Height H75mm H100mm H125mm H150mm H200mm H400mm H575mm

A62.875.4 500 500 875 x1 - - x2 - x1 -A62.225.1 500 500 225 - - - x1 - - -A62.425.3 500 500 425 - x2 - x1 - - -A62.650.1 500 500 650 - - - - - - x1A62.650.2 500 500 650 - - - x1 - x1 -A62.650.3 500 500 650 x2 - - - - x1 -A62.650.5 500 500 650 x2 x1 - x2 - - -A62.650.6 500 500 650 x2 x4 - - - - -A62.800.4 500 500 800 x2 - - x1 - x1 -A62.800.5 500 500 800 x4 - - - - x1 -A62.800.6 500 500 800 - x4 - x2 - - -A62.800.7 500 500 800 x4 x1 - x2 - - -A62.800.8 500 500 800 x4 x4 - - - - -


122

Dimensions, mm Cabinet Drawer Combination, Height and Units OrderCode Nr. Width Depth Height H75mm H100mm H125mm H150mm H200mm H400mm H575mm

A62.875.4 500 500 875 x1 - - x2 - x1 -A62.875.5 500 500 875 x1 x3 - - - x1 -A62.875.7 500 500 875 x1 x4 - x2 - - -A62.875.8 500 500 875 x5 x1 - x2 - - -A62.875.9 500 500 875 x5 x4 - - - - -A63.650.2 750 500 650 - - - x1 - x1 A63.650.3 750 500 650 x2 - - x1 - - -A63.650.5 750 500 650 x2 x1 - x2 - - -A63.650.6 750 500 650 x2 x4 - - - - -A63.650.7 750 500 650 x6 x1 - - - - -A63.800.4 750 500 800 x2 - - x1 - x1 -A63.800.5 750 500 800 x4 - - - - x1 -A63.800.6 750 500 800 - x4 - x2 - - -A63.800.7 750 500 800 x4 x1 - x2 - - -A63.800.8 750 500 800 x4 x4 - - - - -A63.875.4 750 500 875 x1 - - x2 - x1 -A63.875.5 750 500 875 x1 x3 - - - x1 -A63.875.7 750 500 875 x1 x4 - x2 - - -A63.875.8 750 500 875 x1 x7 - - - - -A63.875.9 750 500 875 x5 x4 - - - - -A64.800.4 600 600 800 x2 x1 - - - x1 -A64.800.5 600 600 800 - x2 - x2 x1 - -A64.800.6 600 600 800 x2 x2 - x1 x2 - -A64.800.7 600 600 800 x2 x4 - x1 - - -A64.800.8 600 600 800 x4 x4 - - - - -A64.900.4 600 600 900 - x2 - x1 - x1 -A64.900.6 600 600 900 - x3 - x2 x1 - -A64.900.7 600 600 900 x2 x3 - x1 x1 - -A64.900.8 600 600 900 x3 x3 x1 x1 - - -A64.900.9 600 600 900 x4 x5 - - - - -A65.800.4 750 600 800 - - x2 x2 - -A65.800.5 750 600 800 - x2 - x2 x1 - -A65.800.6 750 600 800 x2 x2 - x1 x1 - -A65.800.7 750 600 800 x2 x4 - x1 - - -A65.800.8 750 600 800 x4 x4 - - - - -A65.900.5 750 600 900 - x2 - - x3 - -A65.900.6 750 600 900 - x3 - x2 x1 - -A65.900.7 750 600 900 x2 x3 - x1 x1 - -A65.900.8 750 600 900 x3 x3 x1 x1 - - -A65.900.9 750 600 900 x4 x5 - - - - -A66.800.4 750 750 800 - - - x2 x2 - -A66.800.5 750 750 800 x2 - x2 x1 - -A66.800.6 750 750 800 x2 x2 - x1 x1 - -A66.800.7 750 750 800 x2 x4 - x1 - - -A66.800.8 750 750 800 x4 x4 - - - - -A66.900.5 750 750 900 - x2 - - x3 - -A66.900.6 750 750 900 - x3 - x2 x1 - -A66.900.7 750 750 900 x2 x3 - x1 x1 - -A66.900.8 750 750 900 x3 x3 x1 x1 - - -A66.900.9 750 750 900 x4 x5 - - - - -A67.800.4 1125 750 800 - - - x2 x2 - -A67.800.5 1125 750 800 - x2 - x2 x1 - -A67.800.6 1125 750 800 x2 x2 - x1 x1 - -A67.800.7 1125 750 800 x2 x4 - x1 - - -A67.800.8 1125 750 800 x4 x4 - - - - -A67.900.5 1125 750 900 - x2 - - x3 - A67.900.6 1125 750 900 - x3 - x2 x1 - -A67.900.7 1125 750 900 x2 x3 - x1 x1 - -A67.900.8 1125 750 900 x3 x3 x1 x1 - - -A67.900.9 1125 750 900 x4 x5 - - - - -A67.800.8 1125 750 800 x4 x4 - - - - -A67.900.5 1125 750 900 - x2 - - x3 - -A67.900.6 1125 750 900 - x3 - x2 x1 - -A67.900.7 1125 750 900 x2 x3 - x1 x1 - -A67.900.8 1125 750 900 x3 x3 x1 x1 - - -A67.900.9 1125 750 900 x4 x5 - - - - -

Selection..... continuation

123

A62

M63.800.6

Cabinet Drawer

D-2 Mobile Cabinets

• H952 x W750 x D650mm• 100 kg per drawer capacity • 6 drawers c/w roller bearings • Single key lock design • x1 tray c/w rubber protective cover • x2 fi xed & x2 swivel brake 125mm diameter caster wheels • Material: Electrogalvanised steel • Finish: Epoxy powder painted


OrderCode Nr. M63.800.6


124

M62,M63,M64 and M65Mobile drawer cabinet.

• Ideal for mechanics,fi tters and maintenance technicians.

• Equipped with push/pull handles.• Top quality rubber castor and tyred

wheels to ensure easy roll even when heavily loaded.

• External height:

Model M62 : 725 mmModel M63 : 775,925 and 1000 mmModel M64 : 775,925 and 1025 mm.Model M65 : 1050 mm.

Series M62 M63 M64 M65 mm mm mm mm mm Width 500 750 600 750 Depth 500 500 600 600 725 775 775 1050 Height 925 925 1000 1025

125

D-3 Heavy Duty Work Benches


• Made from heavy gauge channel frameworks backed with full width bracing to provide high stability.

• Epoxy powder coated. Wooden top 40 mm thick.• Workbench combination /confi guration tailored to your

specifi c requirements.• Optional test bench are comprehensively equipped with

integral power sockets, service rack, power duct and extra lighting unit.


126

1 Work Benches

Dimensions, mm OrderCode Nr. Height Width Depth Timber Top Thickness A21.156.00 830 1500 600 30mm A21.206.00 830 2000 600 30mm A22.159.00 830 1500 900 30mm A22.209.00 830 2000 900 30mm

A21 Modular Frame Work Bench

A22 Heavy Duty Work Bench

B62, B63 and B64 Workbench System

2. Work Bench System B62, B63 and B64Combining A62,A63 and A64 cabinets with a wooden top will give you a workbench of your choice. Wooden top size available: width 1500 and 2000 mm. Depth 700 mm and Thickness 30 mm.Height of workbench available : 830, 905 and 930 mm.

A21 Modular Frame Work BenchEpoxy powder coated tough steel section framework.Frames are fully braced to ensure stability.Optional workbench combinations can be made up from any workbench and installing A62 and A63 cabinets below the wooden top.

Optional bench panels are supplied complete with rear supports to allow fi tting to the workbench.• Bench panel available: Height 457 x width 1500 mm. (OrderCode Nr :A25.54.031) Height 457 x width 2000 mm. (OrderCode Nr :A25.54.041)

A22 Heavy Duty Work BenchMade from heavy gauge channel frameworks backed with full width bracing to provide high stability.Epoxy powder coated.Wooden top 40 mm thick.Workbench combination /confi guration tailored to your specifi c requirements.Optional test bench are comprehensively equipped with integral power sockets, service rack, power duct and extra lighting unit.

B62, B63 and B64 Workbench System - in different combinations.

D3 - Heavy Duty Work Benches

127

3. Hexagon work bench A29Modular frame type.Made from electro-galvanised steel .Epoxy powder coated.Optional feature enable A62 cabinets to be selectively mounted under the wooden top.A62 cabinet support type.The wooden top is mounted on the top of six units of A62 cabinets.Size : 2600 x 2252 x front width 1300 mm. Height 830 mm.• Accessories available: Central perforated tool panel kits Hexagon central utility box.

A29 Hexagon Work Bench

A29 Hexagon Work Bench

4. High Capacity DRAWER COUNTER SYSTEM A622, A623, A633 Series

Combining A62 and A63 cabinets with a wooden top will give you a serving counter of your choice.Wooden top size available: Width 1000,1500 and 2000 mm. Depth 600 mm, and Thickness 30 mm. Height of counter available : 830 and 903 mm.

A622, A623, A633 Series

Drawers - showing dividers


128

Table + A62.225.1

Table + A62.425.3

Table + A62.425.3 + A62.225.1

5. Heavy Duty Work Bench1000 Kg Load capacity H830xW1500xD550 mm 30 mm timber top Screw out adjustable feet.Material: Electrogalvanised steel. Finish: Epoxy powder painted

Table A23

129129

D-4 Tooling Maintenance Trolley


• 1000 mm wide x 550 mm deep x 955 mm high.• Spacious cupboard section come with rear louvred panel for

plastic bins and adjustable shelf.• Door inner and side walls are perforated for tool storage.• Center locking for drawer stacks.• Total safety individual trigger locks on all drawers to prevent

accidental opening in motion even when central locking is not in operation.

• Stability and manoeuvrability ensured by quality rubber tyred castor set.

• Choice of work top is available. Wooden top 30mm thick or metal tray with rubber mat.

• Standard end mounted document pocket.• Attractive durable epoxy powder paint fi nish in dual colours,

blue RAL 5015 and gray RAL 7001.


130130

Heavy Duty Maintenace Tool Trolley• H952 x W1000 x D550 mm • 100 kg per drawer capacity • x2 keys, 12 drawers c/w roller bearings • x1 tray c/w rubber protective cover • x2 fi xed & x2 swivel brake 125mm diameter caster wheels • Material: Electrogalvanised steel • Finish: Epoxy powder painted

OrderCode Nr. A28.66.02

Selection

A28.66.02 + A62.425.1

A28.66.02 + A62.225.3

A28 HD Maintenance Tool Trolley

131

High Capacity Cupboards A24

D-5 Heavy Duty Steel Cupboards


• Cupboard housings are made of electrogalvanised steel sheets and fully welded to ensure integrity of shape and high loading capacity.

• Epoxy powder coated in modern dual colors, gray RAL 7001 for housings and blue RAL 5015 for fronts.

• Doors come complete with swing locking mechanism.• Drawers glide easily on steel bearings even when loaded to

100 kg UDL capacity.• Drawer space utilisation is greatly enhanced by the use of

metal partitions and dividers• Universal in application: for storing tools and machines;

components and materials.


132

1. High Capacity Cupboards Housing and Doors: HC SeriesStandard cupboard size is 1000 mm wide 590 mm deep 1900 mm highComplete with swing locking mechanism, epoxy painted in

Grey (RAL 7001) housing and Blue (RAL 5015) doors.Four types of inner-door panels are available, perforated,

louvred, plain or glazed (2.0mm thick acrylic sheet).Versatile Combination: This high capacity cupboard HC

Series, is designed and engineered specifi cally for use in an industrial workshop or store environment.

The system comprises of accessories such as drawers, partitions, shelves, tooling panels and wooden top which enables the creation of units tailored to your exact requirements.

2. Series SC Cupboard Housing and DoorsStandard cupboard size is 1000 mm, width 425 mm, depth 1900 mm, height

High Capacity Cupboards A24

Standard Capacity Cupboards A38

Model Doors Shelves Drawers Perforated Louvred Wooden Top OrderCode Nr. Perforated Louvred Plain Glazed Tooling Panel Tooling Panel

A 2 - - - - - - - - 24.11 B - 2 - - - - - - - 24.12 C - - 2 - - - - - - 24.13 D - - - 2 - - - - - 24.14 E 2 - - - - 4 1 1 1 24.15 F 2 - - - 3 4 - - - 24.16 G 2 - - - 3 9 - - - 24.17 H - 2 - - - - - 2 - 24.18 I - 2 - - 3 - - - - 24.19

Model Doors Shelves OrderCode Nr. Perforated Louvred Plain Glazed

A 2 - - - - 38.11 B - 2 - - - 38.12 C - - 2 - - 38.13 D - - - 2 - 38.14 E - - - 2 3 38.15 F - 2 - - 3 38.16 G - - 2 - 3 38.17

Accessory Shelf

Supplied with support brackets and fi ttings.Grey epoxy p;aintedShelf adjusted in 25 mm vertical increments.Load capacity 100kg

Dimensins, mm OrderCode Nr. width x depth x height 915 x 370 x 35 38.03.00

133

D-6 Panel Trolley


• Made from steel and suitable for arduous workshop conditions.

• Epoxy powder coated RAL 7001.• Push-pull handle.• Large diameter rubber tyred castor wheels ensure smooth

mobility.


134

OrderCode Nr. A27.61

1. Mobile Tool TrolleyDimensions: H1300 x W1000 x D600mmThis double sided trolley is extremely sturdy and easy to manoeuvre.The inclined panels ensure that tool are safely secured when the unit is in motion.Base tray with raised edges provide useful space.Supplied fl at packed with full assembly kits and detailed instruction or fully factory assembled.Hook kits is optional.

2. Louvred Trolley - A27Sizes available: H1300 x W1000 x D600mm H1300 x W600 x D600mmLouvred tool panels mounted on two side over a base tray.

Mobile Tool Trolley - A27

Mobile Louvred Trolley - A27

Tool Blocks Trolley - A27

OrderCode Nr. Dimensions, mm Tool Block mounting capacity Height Width Depth

A27.10 1300 600 600 x16 (Supplied without tool block) A27.11 1300 1000 600 x24 (Supplied without tool block)

3. Tool Block Trolley - A27Dimensions: H1100 x W780 x D600mmMounted with rails for bins #2 and #3 on both sidesMade from electro-galvanised steel sheet.Epoxy powder coated.Standard feature of all trolleys: Both ends are fi xed with push-pull handles and 100mm castor wheels.

OrderCode Nr. A27.40

135135

D-7 Perforated Tool Panel System


Option available• Perfo workshop kits: OrderCode Nr.A25.67.420• Kits comes with 4 pcs of panel: Height 1000mm x Width 457mm & 54 assorted accessories.• A selection of perfo tool panel board of various sizes is also

available: 500 x 457mm 1000 x 457mm 1500 x 457mm 2000 x 457mm

A 25 Wall mounting perforated tool panel system and accessories


136

1. Free Stand Rack SystemThe rack system uses standard perfo panels 1000 mm x 457 mm.Three heights are available, made by either, two, three or four panels high, mounted on sturdy upright sections.Racks can be single or double sided.Single sided racks can be converted to double sided by simply adding panels to the opposite side when required.Adjustable feet to compensate for uneven fl oors.

A. Single Sided Racks

OrderCode Nr Height mm Type

A72.67.22 1080 2 panels high A72.67.23 1540 3 panels high A72.67.24 2000 4 panels high

OrderCode Nr Height mm Type

A72.67.12 1080 2 panels high A72.67.13 1540 3 panels high A72.67.14 2000 4 panels high

B. Double Sided Racks

2. Rack StorageSingle and double side free standing racks for use in conjunction with tool blocks. Available in three colours.

A. Single Sided Racks

OrderCode Nr Height mm Tool Block Capacity

A72.67.11 1080 16 A72.67.12 1540 24 A72.67.13 2000 32

B. Double Sided Racks

OrderCode Nr Height mm Tool Block Capacity

A72.67.21 1080 32 A72.67.22 1540 48 A72.67.23 2000 64

Free Stand Rack System

Rack Storage3. Bench Panels

Bench panels are supplied complete with rear supports to allow fi tting to almost any workshop.Two lengths, 1600 mm and 2000 mm to work in conjunction with ACE A21 framework bench system

OrderCode Nr Dimensions, mm

A25.54.031 1500 X 457

A25.54.032 2000 xX457

Bench Panels

Documents

ace2014p