Accu-LiteTM Aluminum Wheels

LIGHTER WEIGHT | ULTRA-ENHANCED FINISH | FEWER PART NUMBERS

The lightest and brightest in the industry.

Your only single source for industry-leading wheel end solutions.STEEL & ALUMINUM WHEELS | DRUMS | HUBS | ROTORS | SLACK ADJUSTERS

Wheel Size Part Number

Bolt Holes

Bolt Circle

CenterBore (mm)

Offset Weight (lbs)

Max Load (lbs)

Max Infl ation

(psi)

22.5 x 8.25 41644 10 285.75 220 6.59 45 7,400 131

22.5 x 8.25 41644 10 285.75 220 6.59 45 7,400 131

22.5 x 8.25 41644 10 285.75 220 6.59 45 7,400 131

22.5 x 8.25 41644 10 285.75 220 6.59 45 7,400 131

The new standard in aluminum wheels.As a leader in wheel technology, Accuride Wheels has raised the standard for aluminum wheels

by expanding our Accu-Lite family of wheels to include four new lightweight aluminum wheels.

Accu-Lite shines in gloss comparison test. When tested against equivalent, competitive wheels, the Accu-Lite aluminum wheel proved up to 9% more glossy than competitors.

Accuride’s wheels were compared with equivalent competitive wheels using industry standard ASTM test methods and statistically valid sample sizes. Accuride’s average gloss reading was superior (measured in gloss units – a higher number represents a glossier surface finish).

Accu-LiteTM Aluminum Wheels

FINISH OPTIONS

BEST XPC

CODE

BETTER XP

GOOD ANP

Ultra Enhanced Finish with Accu-shield®

Easy to maintain, protected finish

Ultra Enhanced FinishBright finish on both sides

Enhanced FinishBest value with a great look

Your only single source for industry-leading wheel end solutions.STEEL & ALUMINUM WHEELS | DRUMS | HUBS | ROTORS | SLACK ADJUSTERS

For more information: 1.800.823.8332 | AccurideCorp.comAccuride Corporation | 7140 Office Circle | P.O. Box 15600 | Evansville, IN 47716-0600

TRANSITION GUIDE

Your Current Wheel Accu-Lite Wheel

29644ANP 41644ANP

29644AIPC, AOP, ABPC 41644XPC

29644ANP 41644ANP

29644AIPC, AOP, ABPC 41644XPC

29644ANP 41644ANP

29644AIPC, AOP, ABPC 41644XPC

29644ANP 41644ANP

29644AIPC, AOP, ABPC 41644XPC

29644ANP 41644ANP

29644AIPC, AOP, ABPC 41644XPC

29644ANP 41644ANP

ACC3.0097 Rev. 2 08/11 ©2011 Accuride Corporation

WEIGHT SAVINGS

Wheel Size Standard PN-Weight

Accu-Lite Aluminum PN-Weight

Accu-Lite Aluminum Weight Savings

22.5 X 14.00 – 0.5” offset 29660 - 66 lbs. 41660 - 59 lbs. 7 lbs.

22.5 X 14.00 – 0.5” offset 29660 - 66 lbs. 41660 - 59 lbs. 7 lbs.

22.5 X 14.00 – 0.5” offset 29660 - 66 lbs. 41660 - 59 lbs. 7 lbs.

22.5 X 14.00 – 0.5” offset 29660 - 66 lbs. 41660 - 59 lbs. 7 lbs.

SPECIFICATIONS