Accreditation Application Form – Open Level€¦ · Diploma of Building Design CPP60419 Advanced Diploma Design and CPP80219 Graduate Diploma of Building Design competency requirements

Note: This document is to be read in conjunction with the BDAA Participant Handbook (C + number) refer to CPP50919 Diploma of Building Design, CPP60419 Advanced Diploma Design and CPP80219 Graduate Diploma of Building Design competency requirements

Open Level Accreditation Application Form

V1 – July 2020

Disclaimer: Printed copies of this document are regarded as uncontrolled, please check to ensure this is the latest version Page 1 of 30

For Office Use

Accreditation Application Form – Open Level § Save and complete this form on your computer – do not handwrite. § Please complete Parts A – N and attach supporting documentation. § Items marked * must be completed. Incomplete applications cannot be processed.

PART A – PERSONAL DETAILS

First name* Surname*

Residential address*

Suburb* State/ Territory* Postcode*

Email* Mobile*

Postal address (if different from above)

Suburb State/ Territory Postcode

CH

ECK

ERA

SSESSOR

PART B – ACCREDITATION ASSESSMENT TYPE

Select the assessment method you are applying for*

Type A – Prescribed Educational Qualification + five (5) years (5000 hours) building design work experience

For this type of assessment, you are required to provide two (2) projects. Two projects that are Class 2-9 multi-storey buildings of three storeys and above and greater than 2000m2, incorporating Type A construction.

Type B – No Prescribed Educational Qualification + seven (7) years (7000 hours) building design work experience

For this type of assessment, you are required to provide three (3) projects. Three projects that are Class 2-9 multi-storey buildings of three storeys and above and greater than 2000m2, incorporating Type A construction.

Note: Refer to Participant Handbook or www.bdaa.com.au for current list of accepted Prescribed Educational Qualifications.Work Experience is assuming a minimum of 1000 hours working in the industry per year of industry experience required.

PART C – QUALIFICATIONS

Select any of the following qualifications and/ or training you have successfully completed*

Diploma of Building Design Diploma of Architectural Technology

Advanced Diploma of Building Design Advanced Diploma of Architectural Technology

Advanced Diploma of Sustainable Building Design Associate Degree in Building Design

Graduate Certificate of Building Design Degree in Building Design

Degree in Architecture Graduate Diploma of Building Design

Masters in Architecture Other industry related qualifications and/ or training

No industry related qualifications

http://www.bdaa.com.au



V1 – July 2020


For Office Use

For each of the qualifications and/or training, complete the table below*

Course Code and Title of Qualification/ Training

Name of University or Registered Training Organisation (RTO)

State/ Territory

Year Completed

CH

ECK

ERA

SSESSOR

For each of the qualifications and/ or training, you are required to attach the following: § Copy of the transcript of competency/subject results § Copy of the qualification issued § Copies are to be signed by a JP as a true and accurate copy of the original

PART D – INDUSTRY INFORMATION

I have been involved in the building design industry for*

Less than 2 years 2-3 years 3-5 years 5-7 years More than 7 years

Provide details of at least one employer relevant to this application (starting with the most recent)

Employer 1*

Business Name

Business Address

Suburb State Postcode

Email Phone

Primary Contact Name

Employer 2

Business Name

Business Address


Email Phone


Employer 3

Business Name

Business Address


Email Phone




V1 – July 2020


For Office Use

CH

ECK

ERA

SSESSOR

If you have a partnership, complete details below

Name Of Partner Email Address

PART F – MEMBERSHIP AND ACCREDITATION/ LICENSING/ REGISTRATION INFORMATION

Are you a member of any of the building design associations listed below?*

Building Designers Association of Australia (BDAA) Yes

Building Designers Association of Queensland (BDAQ) Yes

Design Matters Yes

Building Designers Association of Western Australia (BDAWA) Yes

Building Designers Association of the Northern Territory (BDANT) Yes

Australian Institute of Architects (AIA) Yes

Are you currently Accredited/ Licensed/ Registered as a building designer with any state licensing bodies?* If yes, complete details below

Yes No

PART E – BUSINESS DETAILS

Do you currently have, or intend to have a building design business?* Yes No

If yes, complete details below

Business Name ABN(C1.1, C1.2)

Business Trading Name

Business Address


Email Phone

Business structure (C1.1, C1.2, C10.1) Sole Trader Company Partnership

Association Accreditation/ Licence/ Registration

e.g. Building Designers Association of Australia (BDAA) Type/Level e.g. Low Rise Number



V1 – July 2020


For Office Use

CH

ECK

ERA

SSESSOR

PART J – DECLARATION

You must truthfully answer all questions by ticking the box

Within the last 10 years, have you been:

Convicted or found guilty of any offence involving fraud or dishonesty?* Yes No

Convicted or found guilty of any offence involving violence or the sexual crimes act?* Yes No

Convicted or found guilty of any offence under any law relating to your work as a building designer?*

Yes No

Suspended, or cancelled from holding accreditation/ licensing/ registration as a building designer in any state/ territory or country other than Australia?*

Yes No

Insolvent or bankrupt?* Yes No

Declined, cancelled or had special conditions applied to any indemnity insurance relating to your work as a building designer?*

Yes No

PART H – WORK HEALTH AND SAFETY TRAINING

You are required to have completed Work Health and Safety Construction Induction and hold a current White Card/ General Construction Induction Training (GIT) Card.

I hold a current White Card and/ or General Construction Induction Training (GIT) Card* Yes(C10.1, C12.1, C12.2, C12.3, C12.4)

You are required to attach a copy with your application*

PART I – CONTINUING PROFESSIONAL DEVELOPMENT

As a BDAA Accredited building designer, you are required to maintain a level of competence in an ever-changing industry environment and undertake Continuing Professional Development (CPD) throughout the term of your Accreditation.

The CPD must be an approved program conducted by an accepted industry body. Renewal of Accreditation is dependent upon satisfactory completion of 25 CPD Points per annum. The 25 points per annum is calculated as an average, where a minimum total of 75 points has been attained over three (3) consecutive years.

I agree to participate in CPD and meet the minimum requirements whilst I am an Accredited BDAA building designer*

Yes

I agree to submitting a log of my CPD annually at Accreditation renewal* Yes

PART G – INSURANCE

Do you hold current Professional Indemnity Insurance (PI) or other type of business insurance?* (C1.4, C10.1) Yes

Note: Applicants who are employed by a company can be covered by that company’s PI Insurance while undertaking design work for that company. In this instance, the company’s PI Insurance details and Certificate of Currency must be provided. Complete details below

Insurer Type of Insurance Cover

Amount Insured

Expiry Date

You are required to submit a copy of your current PI Insurance certificate*



V1 – July 2020


For Office Use

In which state/ territory/ country did the event occur?

What were the circumstances?

What was the penalty / outcome?

When did the event occur?

CH

ECK

ERA

SSESSOR

What were the offences or breaches?

If you answered Yes to any of the above, complete the questions below.



V1 – July 2020


For Office Use

PART K - STATUTORY DECLARATION

PRINT A COPY OF THIS FORM AND SUBMIT AS AN ELECTRONIC ATTACHMENT

To be completed by person making declaration:

I

of

a/an

make the following declaration under the Statutory Declarations Act 1959:

That:

a. I am the author of the design of the building(s) in both layout and appearance, and/or the alterations and/or extensions to the building(s), that are submitted with this application for Accreditation

b. and that all information I have provided in my application for Accreditation with Building Designers Association of Australia (BDAA) is accurate to the best of my knowledge.

I understand that a person who intentionally makes a false statement in a statutory declaration is guilty of an offence under section 11of the Statutory Declarations Act 1959, and I believe that the statements in this declaration are true in every particular.

declared at

on before me,

Details of Person Whom the Declaration is Made (in Printed Letters)

,

I certify the following matters concerning the making of this statutory declaration by the person who made it: (* please cross out any text that does not apply):

1. *I saw the face of the person OR *I did not see the face of the person because the person was wearing a face covering, but I am satisfied that the person had a special justification for not removing the covering, and

2. *I have known the person for at least 12 months OR *I have confirmed the person’s identity using an identification document and the document I relied on was:

Note 1: A person who intentionally makes a false statement in a statutory declaration is guilty of an offence, the punishment for which is imprisonment for a term of 4 years - see section 11 of the Statutory Declarations Act 1959.

Note 2 :Chapter 2 of the Criminal Code applies to all offences against the Statutory Declarations Act 1959 — see section 5A of the Statutory Declarations Act 1959.

(Full Name)

(Occupation)

(Full Address)

(Signature of the person making the declaration) (Place)

(Day) (Month and Year) (Signature of person before whom the declaration is made)

(Full Name) (Qualification)

(Full Address)

,

,

.

(describe identification document relied on)



V1 – July 2020


For Office Use

PART L – APPLICATION FEES AND PAYMENT METHOD

Open Level Accreditation Application $1320.00

Resubmission fee due to incomplete/ inadequate application $100.00

Open Level Accreditation Annual Renewal Fee after first year $350.00

All figures include GST

If an application for Accreditation is refused, no refund will be issued.

Once your application has been received, you will be forwarded an invoice for the application fee noted above. Upon receipt of payment, your application will be registered for processing.

PART M – ACCREDITATION APPLICATION CHECKLIST

Tick every box once you have completed the section

Part A Personal details

Part B Accreditation assessment type

Part C Qualifications

Part D Industry information

Part E Business details

Part F Membership and accreditation/ licensing/ registration information

Part G Insurance

Part H Work Health and Safety

Part I Continuing Professional Development

Part J Declaration

Part K Statutory Declaration

Part L Application fee paid

Electronic Attachments

Copies of Qualifications

White Card / GIT Card

Professional Indemnity Insurance Certificate of Currency

Statutory declaration

Note: all files to have the following naming format: Surname – document type e.g. Smith – white card

CH

ECK

ERA

SSESSOR



V1 – July 2020


For Office Use

PROJECT 1 (required for all applicants)

(Class 2-9 multi-storey building of three storeys and above and greater than 2000m2, incorporating Type A construction)

Designer - Client contract (private or commercially sensitive material may be blacked out – site address needs to be included)

(C5.3, C10.1, C10.2, C10.3, C23.1, C23.4, C25.1)

Construction Certificate/ Building Approval plans (preferably stamped)

Completed drawing checklist template

Specifications – to be project specific

Completed specification checklist template

Completed project report template

Completed management report template

Completed performance report template (choose either a supervisor / client / builder or sub-consultant to complete)

BCA report (must be submitted for either project 1 or project 2) (C12.2, C13.3, C14.2, C14.3, C14.4, C15.2, C15.3, C17.1, C25.1)

Tender for builders (must be submitted for either project 1 or project 2) (C16.1, C16.2, C16.3)

For each project you must complete and attach the following documentation:

PROJECT 2 (required for all applicants)



(C5.3, C10.1, C10.2, C10.3, C23.1, C23.4, C25.1)







BCA report (must be submitted for either project 1 or project 2) (C12.2, C13.3, C14.2, C14.3, C14.4, C15.2, C15.3, C17.1. C25.1)

Tender for builders (must be submitted for either project 1 or project 2) (C16.1, C16.2, C16.3)

CH

ECK

ERA

SSESSOR

PART N – PROJECT DOCUMENTS

PROJECT 3 (additional project required for applicants with no Prescribed Educational Qualification)



(C5.3, C10.1, C10.2, C10.3, C23.1, C23.4, C25.1)







Note: all files to have the following naming format: Surname – project number - document type e.g. Smith – project 1 - specifications



V1 – July 2020


For Office Use

Drawing Checklist – Project 1Class 2-9 multi-storey building of three storeys and above and greater than 2000m2, incorporating Type A construction.To be completed by all applicants. Drawings missing items, will require a resubmission which may incur a charge.

Construction Certificate/ Building Approval plans to include:

Title block (including business details, designer, drawn by and revision) (C1.2, C6.4, C13.2, C13.3, C24.2, C24.7)

Site plan (C2.2, C3.1, C3.2, C3.3, C4.2, C4.3, C4.5, C5.2, C5.3, C5.4, C6.1, C6.2, C6.3, C7.3, C7.3, C8.1, C8.2, C8.3, C12.1, C12.2, C12.3, C13.2,

C13.3, C13.4, C14.1,C14.5, C15.2, C15.3, C17.2, C17.3, C24.2)

Floor plan (C3.1, C3.2, C3.3, C4.3, C4.5, C5.2, C5.4, C6.1, C6.2, C6.3, C7.3, C12.1, C12.2, C12.3, C12.5, C13.2, C13.3, C13.4, C14.1, C14.3, C14.4,

C15.2, C15.3, C17.2, C17.3, C21.1, C24.2, C24.3, C24.4)

Elevations (C3.1, C3.2, C3.3, C4.3, C4.5, C5.2, C5.4, C6.1, C6.2, C6.3, C12.1, C12.2, C12.3, C12.5, C13.2, C13.3, C13.4, C14.3, C14.4, C14.5, C15.2,

C15.3, C17.2, C17.3, C21.1, C24.2, C24.3, C24.4)

Sections (C3.1, C3.2, C3.3, C4.3, C4.5, C5.2, C5.4, C6.1, C6.2, C6.3, C12.5, C13.2, C13.3, C13.4, C14.3, C14.4, C17.3, C21.1, C24.2, C24.3, C24.4)

Internal elevations of at least one kitchen/ bathroom detailing joinery (C7.4)

Rendered perspective (3D view) to best demonstrate design and finishes (C3.1, C3.2, C3.3, C4.5, C12.5, C24.4)

Roof plan (C3.1, C4.3, C4.5, C5.2, C5.3, C5.4, C6.1, C6.2, C6.3, C12.5, C13.2, C13.3, C13.4, C14.3, C14.4, C14.5, C15.2, C15.3, C24.2, C24.3, C24.4)

Notated and dimensioned to meet NCC/ Australian Standard requirements (C6.1, C8.1, C13.3, C14.2, C14.3, C14.4, C17.2,

C17.3, C24.5, C24.6)

Notations to include any fire resistance and/or fire safety requirements and/or BCA report (provided by yourself or

consultant) (C7.3. C8.1, C13.3, C14.2, C14.3, C14.4, C17.2, C17.3, C24.5, C24.6)

New work highlighted in colour (C3.1, C3.2, C3.3, C4.2, C4.3, C4.5, C5.2, C5.4, C6.1, C12.5, C13.3, C15.2, C24.4)

Window / door schedules (C4.3, C14.2, C15.3, C17.2, C17.3)

BASIX/ NatHers/ NCC Section J requirements (provided by yourself or consultant) (C4.3, C7.3, C13.3, C14.2, C14.3, C14.4, C15.3, C24.5,

C24.6)

Innovative and energy efficient design solutions noted (C4.3, C4.4, C4.5, C5.2, C5.4, C11.1, C11.2, C11.3, C15.3, C17.3, C21.1)

Site and planning restrictions identified and noted e.g height, setbacks, easements (C4.1, C4.2, C4.5, C5.2, C5.4, C6.1, C6.2,

C6.3, C6.4, C13.3, C15.2, C24.5, C24.6)

Stormwater drainage (provided by yourself or consultant) (C6.2, C7.1, C7.5, C13.3)

Structural drawings (provided by yourself or consultant) (C4.5, C7.1, C7.2, C12.5, C13.3, C14.1, C18.1, C18.2, C18.3)

Services plan e.g. electrical/ hydraulic plan/ A/C/ smoke detectors/ exit signs (provided by yourself or consultant) (C7.5, C12.5,

C13.3, C14.2, C14.4, C17.3, C18.1, C18.2, C18.3)

Safe design sheet and/or risk management report (provided by yourself or consultant) (C10.1, C12.1, C12.2, C12.3, C12.4, C13.3,

C14.5, C25.1)

Optional drawings:

Shadow diagrams

Sediment control plan

Waste management plan

Note: All plans to meet requirements of AS1100 Technical Drawing

For Office Use

Assessor notes:

CH

ECK

ERA

SSESSOR



V1 – July 2020


For Office Use

Specification Checklist – Project 1Class 2-9 multi-storey building of three storeys and above and greater than 2000m2, incorporating Type A construction.To be completed by all applicants. Specifications missing items, will require a resubmission which may incur a charge.

Specifications to include:

To be project specific (C2.1, C10.1, C24.3, C25.1))

Specification provided to client as a drawing sheet or specification document (C2.3, C24.3, C25.2)

Includes preliminaries (C2.2, C24.3, C25.2)

Demonstrates contractual obligations and rights of parties (C2.3, C25.1)

Identifies WH&S roles, responsibilities and rights of parties (C12.1, C25.1)

Identifies forms of communication and time frames between parties (C12.3, C25.2)

Demonstrates regulatory requirements and references standards (C1.2, C2.1, C2.2, C2.3, C24.3)

Clearly describes the nature of the scope of work (C2.2, C24.3)

Includes prescriptive and performance requirements (C2.2, C7.1, C24.3)

Where non-standard requirements are included, technical information is obtained from specialists (C2.1, C2.2, C6.1,

C24.3)

Includes process for monitoring defects and project risks (C9.2, C10.1, C10.2, C10.3)

For Office Use

Assessor notes:

CH

ECK

ERA

SSESSOR



V1 – July 2020


For Office Use

Project Report – Project 1Class 2-9 multi-storey building of three storeys and above and greater than 2000m2, incorporating Type A construction.To be completed by all applicants.Reports missing items, will require a resubmission which may incur a charge.

CH

ECK

ERA

SSESSOR

Class 1 Class 2 Class 3 Class 4 Class 5


What is the National Construction Code (NCC) Construction Type? (C8.2, C15.2) Type A Type B Type C

Did you use Deemed to Satisfy (DTS) or Performance Based Solutions in obtaining construction approval? (C8.2, C8.3,

C15.2, C22.3)

Deemed to Satisfy Performance Based Solutions

What was the client’s design brief for the project? (C11.2, C12.1, C17.1, C21.1)

Describe how the client brief was met and the process you undertook to obtain the client’s approval of your design. (C4.4, C5.2, C5.3, C12.1, C12.2, C12.3, C12.4, C12.5, C17.4)

What were the challenges in obtaining design and/ or construction approval with various authorities/ regulations and how did you overcome these? (C6.1, C8.2, C8.3, C12.5, C14.2, C14.3, C15.1, C15.2, C21.1, C22.1, C22.2, C22.4, C24.5, C25.1)

What innovative and/or energy efficient design solutions were included in the project? (C4.4, C5.1, C11.1, C11.2, C11.3, C22.3)

What cost effective design solutions were included in the project? (C5.1)

What is the National Construction Code (NCC) Classification of this building Type? (C8.2, C15.2) (select all applicable)



V1 – July 2020


For Office Use

Describe the reasons for your main material selections and construction methods (structure and envelope) and their effect on the time and cost of the project, compliance with regulations and environmental impact. (C21.2, C21.3, C21.4, C21.5)

CH

ECK

ERA

SSESSOR

What was your involvement with the client and other stakeholders in the project? (C4.1, C4.4, C5.1, C5.3, C6.4, C11.1, C11.2, C11.3,

C12.1, C12.4, C17.4, C18.3, C21.1)

What was your involvement in the design and documentation of the project? (C4.4, C5.1, C11.2, C11.2, C12.1, C12.2, C12.5, C21.1,

C22.1)

What was your involvement with regulatory authorities? (C4.1, C6.1, C6.4, C8.2, C8.3, C13.1, C13.4, C15.1, C15.3, C21.1, C22.1, C24.5)

What other consultants were used in the project? (C6.1, C6.4, C8.3, C13.1, C15.3, C21.1)

What was your involvement during administration of the Construction Contract? Include information on your role in defect resolution and Certificates of Completion. (C6.4, C9.1, C9.2, C9.3, C16.1, C16.2, C16.3,

C16.4, C16.5)



V1 – July 2020


For Office Use

For Office Use

Assessor notes:

What risk management activities do you implement with each project you undertake? Eg. Safe Design Report, Safety Sheet in drawings. (C10.1, C10.2, C10.3, C25.1)

CH

ECK

ERA

SSESSOR



V1 – July 2020


For Office Use

Management Report To be completed by all applicants.Reports missing items, will require a resubmission which may incur a charge.

CH

ECK

ERA

SSESSOR

Describe your office structure in relation to staff employed. (C11.1, C11.2, C27.1)

Include information on whether your staff are permanent employees or subcontractors, whether they work from your office, and how tasks are divided amongst staff.

What processes are in place to recruit and train new staff members? And to review their performance? (C11.2, C27.3)

When undertaking a new project, how are personnel and other resources allocated to the project? (C23.2, C25.2, C27.1)

Provide an example of a time when either the business or an employee was underperforming. Describe how you identified the underperformance and your process to rectify the issue. (C11.3, C26.4, C27.3)

What processes are used to brief project team members, to co-ordinate work and monitor progress? (C25.3, C24.4, C27.2,

C27.4)

Do you have a standardised process of collaborating with other consultants (e.g engineers, fabricators, quantity surveyors) on projects using BIM project models? (C18.1, C18.3)



V1 – July 2020


For Office Use

At completion of a project, is there a debriefing opportunity where learning outcomes are identified to inform future projects? If so, what is the process? (C25.5, C25.6, C27.4)

What office procedures are in place to ensure the quality and compliance of drawings and documentation produced are of a high standard? (C13.3)

What process is in place to document amendments to drawings and documentation and client approval ? (C24.7)

CH

ECK

ERA

SSESSOR

How are drawings and documents archived in the office to meet legislative requirements? (C17.5)

What processes are in place to ensure the delivery of quality projects and processes? (C26.1, C27.4)

What processes are in place to monitor the operational performance of the business? (C11.3, C25.1, C26.1, C26.2, C26.3, C26.4)

Provide an overview of the method used to determine the costs on the business to undertake the project, work scheduling and any risk mitigation strategies for the business. (C23.3, C23.4, C25.2)



V1 – July 2020


For Office Use

Describe the process in your office for contract administration in relation to preparation of tender documents, reviewing tender responses and awarding the building contract. (C16.1, C16.2, C16.3)

When providing contract administration for a project, what processes are in place for variations, managing disputes regarding quality, cost or timelines, and identification of and rectification of building defects? (C16.4, C16.5)

Provide an example of when there was a requirement to change an organisational process, the steps taken to make the change and the outcome was reviewed. (C26.4)

CH

ECK

ERA

SSESSOR



V1 – July 2020


For Office Use

Performance Report – Project 1PRINT A COPY OF THIS FORM AND SUBMIT AS AN ELECTRONIC ATTACHMENT

Provided by technical supervisor/ client/ builder or subconsultant

Complete this form to describe the applicant’s building design work. Please note you may be contacted to confirm details in this report.

Referee

First Name Surname

Business name

Business Address

State/ Territory Postcode

Email Mobile

Accreditation/ Licence/ Registration number (if applicable) State

What was the applicant’s involvement in the project? E.g. design, documentation, building approvals, internal finishes, landscaping, document control, project management.

What was the referee’s involvement in the project?

What comments does the referee have with regards to the applicant’s work on the project?

For Office Use

Assessor notes:

Signature Date



V1 – July 2020


For Office Use

Drawing Checklist – Project 2Class 2-9 multi-storey building of three storeys and above and greater than 2000m2, incorporating Type A construction.To be completed by all applicants.Drawings missing items, will require a resubmission which may incur a charge.




C13.3, C13.4, C14.1,C14.5, C15.2, C15.3, C17.2, C17.3, C24.2)


C15.2, C15.3, C17.2, C17.3, C21.1, C24.2, C24.3, C24.4)


C15.3, C17.2, C17.3, C21.1, C24.2, C24.3, C24.4)






C17.3, C24.5, C24.6)


consultant) (C7.3. C8.1, C13.3, C14.2, C14.3, C14.4, C17.2, C17.3, C24.5, C24.6)


Window / door schedules (C4.3, C14.2, C15.3, C17.2, C17.3, C14.2, C15.3, C17.2, C17.3)


C24.6)



C6.3, C6.4, C13.3, C15.2, C24.5, C24.6)

Stormwater drainage (provided by yourself or consultant) (C6.2, C7.1, C7.5, C13.3)

Structural drawings (provided by yourself or consultant) (C4.5, C7.1, C7.2, C12.5, C13.3, C14.1, C18.1, C18.2, C18.3)


C13.3, C14.2, C14.4, C17.3, C18.1, C18.2, C18.3)


C14.5, C25.1)

Optional drawings:

Shadow diagrams




For Office Use

Assessor notes:

CH

ECK

ERA

SSESSOR



V1 – July 2020


For Office Use

Specification Checklist – Project 2Class 2-9 multi-storey building of three storeys and above and greater than 2000m2,incorporating Type A construction.To be completed by all applicants.Specifications missing items, will require a resubmission which may incur a charge.


To be project specific (C2.1, C10.1, C24.3, C25.1)










C24.3)


For Office Use

Assessor notes:

CH

ECK

ERA

SSESSOR



V1 – July 2020


For Office Use

Project Report – Project 2Class 2-9 multi-storey building of three storeys and above and greater than 2000m2, incorporating Type A construction.To be completed by all applicants.Reports missing items, will require a resubmission which may incur a charge.

CH

ECK

ERA

SSESSOR




Did you use Deemed to Satisfy (DTS) or Performance Based Solutions in obtaining construction approval? (C8.2, C8.3, C15.2,

C22.3)










V1 – July 2020


For Office Use


CH

ECK

ERA

SSESSOR


C12.1, C12.4, C17.4, C18.3, C21.1)


C22.1)


What other consultants were used in the project? (C6.1, C6.4, C8.3, C13.1, C15.3, C21.1))

What was your involvement during administration of the Construction Contract? Include information on your role in defect resolution and Certificates of Completion. (C6.4, C9.1, C9.2, C9.3, C16.1, C16.2, C16.3, C16.4, C16.5)



V1 – July 2020


For Office Use

For Office Use

Assessor notes:

What risk management activities do you implement with each project you undertake? Eg. Safe Design Report, Safety Sheet in drawings. (C10.1, C10.2, C10.3, C25.1))

CH

ECK

ERA

SSESSOR



V1 – July 2020


For Office Use




Referee

First Name Surname

Business name

Business Address


Email Mobile





For Office Use

Assessor notes:

Signature Date



V1 – July 2020


For Office Use

Drawing Checklist – Project 3Class 2-9 multi-storey building of three storeys and above and greater than 2000m2, incorporating Type A construction.To be completed by applicants who do not have a Prescribed Educational Qualification.Drawings missing items, will require a resubmission which may incur a charge.




C13.3, C13.4, C14.1, C14.5, C15.2, C15.3, C17.2, C17.3, C24.2)


C15.2, C15.3, C17.2, C17.3, C21.1, C24.2, C24.3, C24.4)


C15.3, C17.2, C17.3, C21.1, C24.2, C24.3, C24.4)






C17.3, C24.5, C24.6)


consultant) (C13.3, C14.2, C14.3, C14.4, C17.2, C17.3, C24.5, C24.6)


Window / door schedules (C4.3, C14.2, C15.3, C17.2, C17.3)


C24.6)



C6.3, C6.4, C13.3, C15.2, C24.5, C24.6)

Stormwater drainage (provided by yourself or consultant) (C6.2, C7.1, C7.5, C13.3, C13.3)

Structural drawings (provided by yourself or consultant) (C4.5, C7.1, C7.2, C12.5, C13.3, C14.1, C18.1, C18.2, C18.3, C12.5, C13.3, C14.1,

C18.1, C18.2, C18.3)


C13.3, C14.2, C14.4, C17.3, C18.1, C18.2, C18.3)


C14.5, C25.1)

Optional drawings:

Shadow diagrams




For Office Use

Assessor notes:

CH

ECK

ERA

SSESSOR



V1 – July 2020


For Office Use

Specification Checklist – Project 3Class 2-9 multi-storey building of three storeys and above and greater than 2000m2, incorporating Type A construction.To be completed by applicants who do not have a Prescribed Educational Qualification.Specifications missing items, will require a resubmission which may incur a charge.


To be project specific (C2.1, C10.1, C24.3, C25.1)










C24.3)


For Office Use

Assessor notes:

CH

ECK

ERA

SSESSOR



V1 – July 2020


For Office Use

Project Report – Project 3Class 2-9 multi-storey building of three storeys and above and greater than 2000m2, incorporating Type A construction.To be completed by applicants who do not have a Prescribed Educational Qualification.Reports missing items, will require a resubmission which may incur a charge.

CH

ECK

ERA

SSESSOR




Did you use Deemed to Satisfy (DTS) or Performance Based Solutions in obtaining construction approval? (C8.2, C8.3, C15.2,

C22.3)










V1 – July 2020


For Office Use


CH

ECK

ERA

SSESSOR


C12.1, C12.4, C17.4, C18.3, C21.1)


C22.1)


What other consultants were used in the project? (C6.1, C6.4, C8.3, C13.1, C15.3, C21.1)

What was your involvement during administration of the Construction Contract? Include information on your role in defect resolution and Certificates of Completion. (C6.4, C9.1, C9.2, C9.3, C16.1, C16.2, C16.3, C16.4, C16.5)



V1 – July 2020


For Office Use

For Office Use

Assessor notes:

What risk management activities do you implement with each project you undertake? Eg. Safe Design Report, Safety Sheet in drawings. (C10.1, C10.2, C10.3, C25.1)

CH

ECK

ERA

SSESSOR



V1 – July 2020


For Office Use




Referee

First Name Surname

Business name

Business Address


Email Mobile





For Office Use

Assessor notes:

Signature Date



V1 – July 2020


For Office Use

Assessor notes:

Assessor recommendation: Competent Not competent

Assessment committee notes:

Assessment outcome: Approve Decline

Documents

Accreditation Application Form – Open Level€¦ · Diploma of Building Design CPP60419 Advanced Diploma Design and CPP80219 Graduate Diploma of Building Design competency requirements