Accessories - ics-schneider.com

Accessories

Coupling for tube connectionConnection PN in bar Material Article no.

G 1/4 x 6 mm 100 Steel ZA 106

G 1/2 x 6 mm 400 ZA 107

G 1/2 x 8 mm ZA 108

G 1/2 x 10 mm ZA 109

G 1/2 x 12 mm ZA 110

Clamping nut with nipple to DIN 16284Connection PN in bar Material Article no.

G 1/4 250 Brass ZÜ 061

G 1/2 250 Brass ZÜ 151

600 Steel ZÜ 152

1.000 CrNi steel ZÜ 153

M 20 x 1,5 250 Brass ZÜ 171

600 Steel ZÜ 172

1.000 CrNi steel ZÜ 173

Connection PN in bar Material Articel no.

G 3/8 Steel ZM 1112

G 1/4 Steel ZM 1102

G 1/2 Steel ZM 1152

CrNi steel ZM 1153

G 3/4 Steel ZM 1122

G 1 Steel ZM 1402

Welding sleeve with flatConnection PN in bar Material Article no.

G 1/2 x 30 mm Steel ZM 2153

G 1/2 x 50 mm ZM 2155

G 1/2 x 80 mm ZM 2158

G 1/2 x 100 mm ZM 2150

Welding male to DIN 16282Connection PN in bar Material Article no.

G 1/4 left 400 Steel ZSS 072G 1/4 right 400 Steel ZSS 062G 1/2 left 600 Steel ZSS 192

1.000 CrNi steel ZSS 193G 1/2 right 600 Steel ZSS 152

1.000 CrNi steel ZSS 153

Welding sleeve standard

ICS Schneider Meßtechnik GmbH Tel.: 03303 / 504066 [email protected] Briesestraße 59 Fax: 03303 / 504068 www.ics-schneider.de D-16562 Bergfelde / Berlin

AccessoriesAdapters

female male PN in bar Material Article no.G 1/8 G 1/4 250 Brass ZA 011

G 1/4 G 1/8 250 Brass ZA 021

G 1/4 M 12 x 1,5 250 Brass ZA 031

1.000 CrNi steel ZA 033

G 1/4 G 3/8 250 Brass ZA 041

G 1/4 G 1/2 250 ZA 051

G 3/8 G 1/4 250 ZA 061

G 3/8 G 1/2 250 ZA 071

G 1/2 G 1/4 250 ZA 081

G 1/2 G 3/8 250 ZA 091

G 1/2 G 3/4 250 ZA 101

G 1/2 M 20 x 1,5 250 Brass ZA 111


M 20 x 1,5 G 1/2 250 Brass ZA 121


Sleeve to DIN 16283

right left PN in bar Material Article no.G 1/4 G 1/4 250 Brass ZS 061

G 1/2 G 1/2 250 Brass ZS 151

600 Steel ZS 152

1.000 CrNi steel ZS 153

G 1/2 M 20 x 1,5 250 Brass ZS 181

600 Steel ZS 182


M 20 x 1,5 G 1/2 250 Brass ZS 191

600 Steel ZS 192


M 20 x 1,5 M 20 x 1,5 250 Brass ZS 171

600 Steel ZS 172


Flat to DIN 16258Material Article no.

1.600 Copper ZD 064

400 NP 300 ZD 068

1.600 CrNi Steel ZD 063

400 PTFE ZD 069

1.600 Copper ZD 154

400 NP 300 ZD 158

1.600 CrNi steel ZD 153

400 PTFE ZD 159

G 1/4 and M 12 x 1,5

G 1/2 and M 20 x 1,5

Connection

for thread


Accessories

Instrument holders

Length in mm Material DIN Article no.

60 Aluminium 16 281 ZM 068

100 black ZM 108

160 ZM 168

60 CrNi steel ZM 063

100 ZM 103

160 ZM 163

Adapters for instrument holders

Connection PN in bar Material DIN Article no.

G 1/2 250 Brass 16 281 ZZ 151

600 Steel ZZ 152

600 CrNi steel ZZ 153

M 20 x 1,5 250 Brass ZZ 171

600 Steel ZZ 172

600 CrNi steel ZZ 173

Overpressure Limiting device

Ranges PN in bar Material Connection Article no.

30 Brass G 1/2 ZÜV 101

10...700 mbar CrNi steel ZÜV 103

400 Brass ZÜV 201

0,4...2,5 bar CrNi steel ZÜV 203

Brass ZÜV 301

2...6 bar CrNi steel ZÜV 303

Brass ZÜV 401


Brass ZÜV 501


Brass ZÜV 601


Brass ZÜV 701



Accessories

Push-button shut-off-cock with DVGW-License

Female Female PN in bar Material DIN Article no.

G 1/2 G 1/2 4 Brass ZDH 151

Female Male thread Material DIN Article no.

G 1/4 G 1/2 Brass ZSN 151

G 1/4 G 1/2 CrNi steel ZSN 153

Throttling devices

Female Male thread PN in bar Material Article no.

250 Brass ZDM 151

630 Steel ZDM 152

G 1/2 G 1/2 630 CrNi steel ZDM 153

M 20 x 1,5 M 20 x 1,5 250 Brass ZDM 171

Sealing connected fitting


Pressure Gauge Cocksin Brass

according to DIN 16 260, 16 261, 16 262 and 16263

ApplicationPressur gauge cocks are intendet to isolate the pressuregauge from the pressure medium in order to enable inspection ore replacement of the gauge.An additional test gauge can be the pressure gauge cocks with test connector . Features Pressure gauge valves are suitable up to 25 barpressure rating and temperature span from -20°C to 50 °Cfor liquids, gaseous media and vapours.

Connection Body PN in bar Temperature Article no.Material range

G 1/4 Brass 6 -10...+50 °C ZH 1061

G 3/8 ZH 1101

G 1/2 ZH 1151

G 1/4 Brass 16 -10...+50 °C ZH 2061

G 1/2 Brass 25 ZH 2151CrNi steel ZH 2153

G 1/2 Brass 25 -10...+50 °C ZH 3151

according DIN 16 263

Sleeve - Male thread

Design

Female-Female

Sleeve -Male thread with test connector M 20 x 1,5

according DIN 16 260 and 16 262


Connection Body PN in bar Temperatur- Article no.Material range

G 1/2 Brass 25 -10...+50 °C ZH 4151

G 1/2 Brass 25 -10...+50 °C ZH 5151


Design

Sleeve - Male with gland packing and test flange 60 x 25 mm


Swiveling nut - Male with gland packing and test flange 60 x 25 mm


Pressure Gauge SyphonsDIN 16 283 or industrial standard

ApplicationPressure gauge syphons are intendet to protect the pressure gauge from the effect of hot pressure midiaand also to reduce the effect of rapid pressure surges. MaterialCarbon steel ( St 33 or St 35.8 )Stainless steel ( 1.4571)

Connection Material Max.PN Max. Temp. Form Article no. in bar °C

St 35.8 A ZW 612G 1/2 St 35.8 100 120 °C B ZW 612

stainless steel 80 300 °C A ZW 613stainless steel 63 400 °C B ZW 613

St 35.8 A ZW 512G 1/2 St 35.8 100 120 °C B ZW 512

stainless steel 80 300 °C A ZW 513stainless steel 63 400 °C B ZW 513

Design

Straight form with connecting sleeve entry butt welding Form BStraight form , with connecting sleeve x male thread 1/2" Form A

Angle-Form , with connecting sleeve x male 1/2" Form AAngle-Form , connecting sleeve with entry butt welding Form B


Dimensions

Form A Form B

Form BForm A


Pressure Gauge SyphonsDIN 16 282 or industrial standard

ApplicationPressure gauge syphons are intendet to protect the pressure gauge from the effect of hot pressure midiaand also to reduce the effect of rapid prssure surges. MaterialCarbon steel ( St 33 or St 35.8 )Stainless steel ( 1.4571)

Connection Material Max.PN Max. Temp. Form Article no. in bar °C

A ZW 102G 1/2 St 35.8 100 120 °C B ZW 112

80 300 °C A ZW 103stainless steel 63 400 °C B ZW 113

C ZW 202G 1/2 St 35.8 100 120 °C D ZW 212

80 300 °C C ZW 203stainless steel 63 400 °C D ZW 213

G 1/2 St 33 25 ZW 302

G 1/2 St 33 25 ZW 402

Design

U-Form,without sealingthread

Trumpet form with , entry butt welding

Trumpet form , without sealingthread

Trumpet form , with connecting thread 1/2"

U-Form A, with connecting thread 1/2"U-Form B, with entry butt welding


Dimensions

Form A Form B

Form DForm C


Pressure Gauge Valves

to DIN 16270 , DIN 16271 , DIN 16272

ApplicationPressur gauge valves are intendet to isolate the pressure gaugefrom the pressure medium in order to enable inspection ore replacement of the gauge. Features Pressure gauge valves are suitable up PN 250 to PN 400 barpressure rating and temperature span from -20°C to 200 °Cfor liquids, gaseous media and vapours.

Connection Material PN in bar Temperature Form Article no. range

Brass 250 -10...+120°C A MV 101G 1/2 B MV 111oder Steel 400 -10...+120°C A MV 102

M 20 x 1,5 B MV 112CrNi steel 400 -20...+200°C A MV 103

B MV 113

G 1/2 Brass 250 -10...+120°C A MV 201oder B MV 211

M 20 x 1,5 Steel 400 -10...+120°C A MV 202B MV 212

CrNi steel 400 -20...+200°C A MV 203 B MV 213

G 1/2 Brass 250 -10...+120°C A MV 301oder B MV 311

M 20 x 1,5 Steel 400 -10...+120°C A MV 302B MV 312

CrNi steel 400 -20...+200°C A MV 303B MV 313

Form A with swiveling nut to DIN 16 283Form B union with tall nipple per DIN 16284 and shaft to fit surface mounting bracket

to DIN 16 270, without test connector

to DIN 16 271, with test connection M 20 x 1,5

to DIN 16 272, with separate shut off test connection M 20 x 1,5

Form B union with tall nipple per DIN 16284 and shaft to fit surface mounting bracket

Design

Form A with swiveling nut to DIN 16283Form B union with tall nipple per DIN 16284 and shaft to fit surface mounting bracket

Form A with swiveling nut to DIN 16283


Design and Dimensions

Form A Form B

to DIN 16 272Form A Form B

Form A Form Bto DIN 16270

to DIN 16 271


Documents

Accessories - ics-schneider.com