Deluxe WW Collet Set (Inch)Includes #1161, 17 collets, potchucks, etc. in wooden case.#1162 $275.00

Deluxe WW Collet Set (Metric)Includes #1161, 14 collets, potchucks, etc. in wooden case.#1179 $245.00

Pot ChucksEasily machined. Use for large or odd shaped pieces. Note: designed to holdmaterial only on the face end, not through the collet. Max. gripping depth 3/16”#2100 ¾” size $25.00 #2101 1” size $27.00 #2102 1¼” size $30.00

WW Collet BlankMachine it to whatever shape you need.#2050 1/2”size $10.00#2083 1” size $30.00

WW Collets $17.00 eachPart# Size Part # Size2051 1/16” 2068 1.5mm2052 5/64” 2069 2.0mm2053 3/32” 2070 2.5mm2054 7/64” 2071 3.0mm2055 1/8” 2072 3.5mm2056 9/64” 2073 4.0mm2057 5/32” 2074 4.5mm2058 11/64” 2075 5.0mm2059 3/16” 2076 5.5mm2060 13/64” 2077 6.0mm2061 7/32” 2078 6.5mm2062 15/64” 2079 7.0mm2063 1/4” 2080 7.5mm2064 17/64” 2081 8.0mm2065 9/32”2066 19/64”2067 5/16”

SHERLINE’S New DC MotorTo upgrade your old Sherlineequipment to the new DC motor.#3305 DC Motor, Pulley & Speed Control Assembly $210.00#4323 DC Stepped Main SpindlePulley $16.00

Vertical Milling TableMounts onto the lathe cross slide. Vertical travel is 2¼” Mount cutters in headstockand use X & Y axis to move workpiece.#1185 Inch $120.00#1184 Metric $120.00

Rocker StyleToolpostQuick and easy setupfor 1/4” toolbits#3057 $30.00

Oversize Handwheel 2½”#3400 Inch $15.00#3410 Metric $15.00

Adjustable Zero Handwheel2½” diameter with resetting to zero or any desired setting#3440 Inch $40.00#3450 Metric $40.00

Digital Readout Two-axis DROpackage with rpm gage for the Sherline Lathe. Readouts can be reset to zero at any time with push of a button.#8200 $325.00Call about Factory Installation

15” Lathe Vinyl Dust Cover#4150 $10.0024” Lathe Vinyl Dust Cover#4151 $12.00

Power Feed 115 voltConstant speed gear motorcomplete with on/offswitch, brackets, clutchmechanism.#3001 $90.00

FOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE 800-872-6500PAGE 44

Allen “T” Driver#3020 $6.00

Toggle Switch Dust CoverFor use when turning wood orbrass to keep the dust out of switch#3015 $8.50

Spur DriverUsed to drive woodwhen turning#3035 $25.00

Wood Tool Rest Set of rests (3” & 5”) touse in wood turning.#3038 $55.00

ReplacementDrive Belt#4004 $8.95

Cut-off ToolholderConsists of a very slenderHSS cutting blade mountedon a special holder#3002 $50.00

WW Collet Adapter&Drawbar For Use withWatchmakers collets#1161 $50.00

Inch WW Collet SetIncludes #1161 Adapter andDrawbar, and 5 collets: 1/16”,1/8”, 3/16”, 1/4”, and 5/16”

WW Collet AdapterHeld in the adjustabletailstock tool holder #1203,it allows the use of WWcollets in the lathe tailstock.#2085 $55.00

Adjustable TailstockCustom Tool HolderWith your own custom splitcollet, this part can holdvirtually any tool you wishto adapt to it. It is also usedwith #2085 collet adapter.#1203 $45.00

Adjustable Tailstock ChuckHolder The adjustmentscrews and split design allowperfect centering for the chuck. Drill chuck not included. Usechuck #1069 or #1072#1202 $45.00

Metric WW Collet SetIncludes #1161 Adapterand Drawbar, and 5 collets: 2.0mm, 3.0mm, 4.0mm,5.0mm, and 6.0mm#1178 $90.00

Vertical Milling ColumnAttaches to the bed of the lathe in place of theheadstock. Attach headstock to column. Parts tobe machined are mounted on the cross slide (seeSherline milling page for vises, hold downs, etc.)#3050 inch $150.00#3053 metric $150.00#3480 Deluxe inch $170.00 same as #3050 but with “zero” adjustable handwheels#3485 Deluxe metric $170.00

Live Center StandardLive center with MT-0to fit tailstock#1191 $40.00

#4360 ChipGuard $15.00Mounts onHeadstock

Thread Cutting AttachmentMachine 31 different inch threadpitches (10 tpi to 80 tpi) and 28different metric (.25 to 2.0mm)#3100 $125.00

Quick Change Toolpost with 4 holders (made by A2Z CNC)

#QCTPS1 $75.00

Adjustable Live CenterThis center allows you toprecisely position thecenter if the ultimate inaccuracy is your goal#1201 $65.00

Knurling ToolholderCreate a diamondknurl on your parts#3004 $75.00

Two Position Toolpost 1/4” capacity on both sides#3003 $16.00

Two Position Toolpost 5/16” capacity on one side3/8” capacity on other side#3008 $25.00

ACCESSORIES FOR SHERLINE LATHE