Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Rev. 101112
Industrial Door Solutions. 1.800.527.8775
Power Plants
Mining Operations
Agricultural Processing
Refineries
Industrial Facilities
Belt Cleaner Inspection
Blade Change Outs
Application Use
1/4 Turn Mechanical Latch, Positive Detent
Low Profile Frame - No benching of materials
Provides Access to Material Flow and Mechanical Parts
Flanged Frame– Sheds Fines
Weld or Bolt Installation
Quick Facts
One Hand Operation
No Tools Required to Gain Access
Customizable
Economical
Benefits
he KC Supply AH710 Access Hatch / Inspection Door has been designed to provide a quick to install, rugged, and economi-cal access hatch / inspection door for virtually all industrial needs. The AH710 Access Hatch is available in stan-dard and custom sizes, and frame profiles to fit your applica-tion, equipment, and need.
If there is any place in your organization where you need to have easy access, KC Supply can work with you to design and manufacturer a hatch that fits your custom needs.
The flanged frame allows for bolt or weld-in-place installa-tion. To ensure hatch lid seals, to control dust and debris, we factory install gasketing along the full perimeter of the openings.
The Quarter-Turn Mechanical Latch with positive detent provides solid latching capabilities and is designed to have adjustable tension to ensure a positive closure.
Large Handle for Easy Operation
Mild Steel or Stainless Steel construction.
Stocked Sizes Available for Quick Shipping
EPDM Gasket Material
Non-handed, latches in any Installation Con-figuration.
Standard Features
ACCESS HATCH / INSPECTION DOOR
Model AH-710
KC Supply
Industrial Door Group
Kansa City Missouri
Ph 816.753.7676
Toll Free 800.527.8775
Fax 816.753.04444
www.kcsupply.com
Rev. 101112
STANDARD HATCH
The Standard Access Hatch boasts one of the lowest pro-file hatch frames on the mar-ket. This low profile is addi-tionally enhanced with the 45 degree angle formed into the frame which does not allow material to build-up, which is a hazard in many industries.
The flanged frame allows for bolt or weld in place installa-tion. To ensure the hatch lid seals to control dust and de-bris, we factory install gasket-ing along the full perimeter of the openings. This gasketing is attached to the lid so it is out of the way when you are accessing the hatch opening, and the seal is field replace-able.
The Quarter-Turn Mechanical Latch with positive detent pro-vides solid latching capabili-ties. As with all of our prod-ucts we have anticipated the variables of industrial use and designed the latch to have adjustable tension to ensure a positive closure.
One of the major benefits of our products is our industrial experience and, as always, our ability to modify one of our existing products or fully design a new product for your specific application or prob-lem.
Don’t waste your time and money building your own hatches, let us give you what you want, when you want it.
Product to be as per KC Supply's standard specification and design for the Access Hatch, including:
a. Door Panel to be 10-gauge formed steel.
b. Hinges to be, at a minimum, 11-gauge formed steel welded in place. Aminimum of two (2) pivot hinges per access hatch are provided.
c. Frame to be 7-gauge furnished as one piece. Frame to be designed forminimum profile interior ledge to reduce debris buildup.
d. Standard Dust-seal to be EPDM seal, factory applied to perimeter ofdoor panel. Seals to be field replaceable.
e. Finish on all exposed surfaces to be one (1) shop coat of standard KC Supply's shop primer.
f. Latches to be rigid, quarter turn mechanical latch. Latch is field adjust-able and reversible. Provide the appropriate number of latches per sizeof door.
g. Materials: Mild Steel, Stainless Steel (Type: 304-2b, 316 and 316Lavailable). Consult factory.
ACCESS HATCH / INSPECTION DOOR
Industrial Door Solutions.
Welded Hinge Assembly
Quarter-Turn Mechanical Latch with Positive Detent
EPDM Gasket
Low-Profile Frame
1.800.527.8775
Rev. 101112
GASKET TYPE TEMPERATURE
Standard Seal 250 F
HI-TEMP Silicone 450 F
HI-TEMP Fiberglass Rope
1000F
ACCESS HATCH / INSPECTION DOOR
Hatch Frame Profiles
Standard Low Profile Frame
High Neck Frame for Special Applications
Frame with radius cut-out for Curved Surfaces
Access Hatch Modified to Accept Sonic Horn For a Bulk Solid Material
Standard Access Hatches With Hasp
Locking Device.
Custom Applications
Industrial Door Solutions.
STOCKED SIZES SHIPPING WEIGHT
12” X 12” 22 lbs.
12” X 18” 28 lbs.
16” X 16” 31 lbs.
18” X 18” 29 lbs.
24” X 24” 58 lbs.
STANDARD SIZES SHIPPING WEIGHT
Any size from 6” x 6” in 2” increments.
Based on Size Requested
CUSTOM SIZES SHIPPING WEIGHT
Custom Sizes Are Any Sizes That Fall Out of
the Standard and Stocked Categories
Available Upon Request
Standard Access Hatches on a Paddle Mixer
Larger Access Hatch for Personnel Access
ACCESS HATCH / INSPECTION DOOR
CUSTOM DESIGN AVAILABLE
If you need a special design access hatch or inspection door, and you don’t see exactly what you need here, be sure to give us a call. We design and manufacture many unique “one-off” product for various customers.
Don’t settle for off-the-shelf, if you need something else.
1.800.527.8775
Rev. 101112
DIMENSIONAL LAYOUT
© 2012 PS DOORS All Rights Reserved
ACCESS HATCH / INSPECTION DOOR
Dimension A and Dimension B, or the opening dimen-sions, are the dimensions of the access hatch you will be quoted.
Example: If you wanted a 12”X18” access hatch, Dimen-sion A would be 12” and Dimension B would be 18”.
Industrial Door Solutions.
ABOUT OUR COMPANY
PS DOORS is a leader in providing industrial doors, safety products, flood protection products, and custom manufacturing. Beginning manufacturing operations in 1979, PS DOORS’ focus has been on providing our customers with professional sales, service, product design, and value based products.
PS DOORS tailors its products and services to meet the needs of each customer group which ensures consistent, superior service and products.
The combined product offering of PS DOORS encompasses more than 20 standard products, all completely customizable. All of our products are specifically manufactured to meet the requirements of our customers. PS DOORS’ products are manufactured primarily from steel, stainless steel, and aluminum.
PS DOORS prides itself on solving customers’ problems. Our experience, customer focused sales approach, and professional perseverance to succeed, allowed PS DOORS to be identified as “the company to work with” by large design-build companies.
PS DOORS
Industrial Door Group
1150 S. 48th Street
Grand Forks, ND 58201
Phone (701) 746.4519
Toll Free (877) 446.1519
Fax (701) 746.8340
Email: [email protected]
Professionally Distributed by,
facebook.com/PSDOORS
PS DOORS Manufacturing
ISO 9001: 2008 Certified Quality Management System
1.800.527.8775