Access Doors - Sweets · 2015. 9. 16. · BRU: Fire-Rated Recessed Tiled BM: Non-Rated Flush Security Babcock-Davis Access Doors & Panels are manufactured to solve a myriad of access

Access Doors

Always right there.

Babcock-Davis®

Always right there.

Babcock-Davis®

763.488.9247 • fax 763.488.9248 • BabcockDavis.com Copyright © Babcock-Davis 20112

BFRU:Fire-Rated Upward

BDTK: Non-Rated Draft Stop

BPL:Non-Rated Plastic

BXT:Non-Rated Exterior

BFRD:Fire-Rated Oversized

BLW:Non-Rated Lightweight

BHS:Non-Rated High-Security

BTS:Non-Rated Top-Security

BRU: Fire-Rated Recessed Tiled

BM: Non-Rated Flush Security

Babcock-Davis Access Doors & Panels are manufactured to solve a myriad of access needs. Custom sizing, materials, and custom colors are available to ensure that whatever you need for your project, we’ve got you covered. Delivering the doors you need: Babcock-Davis … Always right there.

BN: Non-Rated Flush

BI: Fire-Rated InsulatedBR: Non-Rated Recessed

Access Doors

BU: Fire-Rated Non-Insulated BS: Fire-Rated Insulated Security

Flange

Door

Standard Paintable Powder Coat Finish

to be used as a finish coat or a

prime coat

Key/Lock

Frame

Frame

Latch/Bolt

Feature Specifications

Always right there.

Babcock-Davis®

Copyright © Babcock-Davis 2011 888.412.3726 • fax 888.312.3726 • BabcockDavis.com 3

Access Doors

All-Purpose exposed 1” frame flange for most applications

Plaster stop for plaster applications

Drywall L-bead, ready to accept a joint compound

BNT: All Purpose

Babcock-Davis BN Series non-rated flush access doors have a minimal sight line for a concealed appearance.BNT non-rated access doors are designed with a one inch exposed flange for flush installation in any vertical or horizontal surface.BNW non-rated access doors are manufactured with a tape in bead flange for a concealed appearance in vertical or horizontal drywall surfaces, leaving only the door exposed.BNP non-rated access doors are manufactured with plaster casing bead frames for a concealed appearance in vertical or horizontal plaster surfaces, leaving only the door exposed.Door: 14-gauge cold rolled steelFrame: 16-gauge cold rolled steel BNT: 1” flange for all surfaces BNW: 22-gauge galvanized drywall corner bead BNP: 22-gauge galvanized plaster casing beadHinge: BNT: Concealed spring pin* BNW: Concealed continuous piano BNP: Concealed continuous pianoLatch: Screwdriver cam latchFinish: Paintable powder coat

Rough opening is door size + 1/4”.

*Flush continuous piano hinges are standard on all stainless steel panels and those exceeding 24” width and/or 36” length dimension.

BNW: Tape In BNP: Plaster

Shown with optional 1.125” mortise preparation and colored powder coat.

PRODUCT GUIDE

6” X 6” 16” X 20” 24” X 36” 8” X 8” 18” X 18” 24” X 48” 10” X 10” 18” X 24” 30” X 30” 12” X 12” 20” X 30” 30” X 36” 12” X 18” 22” X 22” 32” X 32” 12” X 24” 22” X 30” 36” X 36” 14” X 14” 24” X 24” 36” X 48” 16” X 16” 24” X 30”

SIZE (WIDTH & HEIGHT)

BNFLANGE LATCH OPTIONSHEIGHTWIDTH

x

B BONDERIZED / GALVANIZED G GASKETING M MASONRY ANCHORS S T304 STAINLESS STEEL

OPTIONS

C SCREWDRIVER CAM LATCH L KEY OPERATED CAM LATCH M MORTISE LOCK PREP

LATCH

T 1” FLANGE W DRYWALL BEAD P PLASTER CASING

FLANGE

Always right there.

Babcock-Davis®


Flush • Non-Rated Access Doors

Babcock-Davis BR Series recessed access doors are designed with a 5/8” depth pan to receive infill material to match surrounding surface.BRW recessed access doors are manufactured with a tape in bead flange for a concealed appearance in vertical or horizontal drywall surfaces and designed with a 5/8” depth pan to receive a layer of drywall for a concealed appearance.BRP recessed access doors are manufactured with plaster casing bead frames for a concealed appearance in vertical or horizontal plaster surfaces and designed with a 5/8” depth pan to receive plaster for a concealed appearance.BRA recessed access door is designed with a 5/8” depth pan to receive acoustical tile.Door: 16-gauge cold rolled steelFrame: 16-gauge cold rolled steel BRW: 22-gauge galv. drywall corner bead BRP: 22-gauge galv. plaster casing bead BRA: No frame required - not recommended for grid ceilingsHinge: Concealed pivoting rodLatch: Screwdriver cam latchPan Depth: 5/8”Finish: Paintable powder coatInsulation: None


BRW: Tape InBRA: No Flange BRP: Plaster

PRODUCT GUIDE

BRFLANGE LATCH OPTIONSHEIGHTWIDTH

x

C SCREWDRIVER CAM LATCH L KEY OPERATED CAM LATCH M MORTISE LOCK PREP

LATCH

A NO FLANGE W DRYWALL BEAD P PLASTER CASING

FLANGE

8” X 8” 18” X 18” 24” X 30” 12” X 12” 20” X 30” 24” X 36” 16” X 16” 24” X 24”


B BONDERIZED / GALVANIZED G GASKETING S T304 STAINLESS STEEL _ CABINET HINGE (VERTICAL)

OPTIONS

Always right there.

Babcock-Davis®


Recessed • Non-RatedAccess Doors

Shown with knurled knob/key operated latch bolt

Babcock-Davis BI Series insulated, fire rated access doors provide access through openings in fire rated vertical or horizontal surfaces. UL listed “B” label for 1-1⁄2 hours in vertical surfaces (maximum temperature rise to 250ºF in 30 min.). Warnock-Hersey listed for 3 hours in horizontal surfaces.BIT fire-rated access doors are designed with a one inch exposed flange for flush installation in any vertical or horizontal surface.BIW fire-rated access doors are manufactured with a tape in bead flange for a concealed appearance in vertical or horizontal drywall surfaces.BIP fire-rated access doors are manufactured with plaster casing bead frames for a concealed appearance in vertical or horizontal plaster surfaces.Door: 20-gauge cold rolled steelFrame: 16-gauge cold rolled steel BIT: 1” flange for all surfaces BIW: 22-gauge galv. drywall corner bead BIP: 22-gauge galv. plaster casing beadHinge: BIT: Flush continuous piano BIW: Concealed pin BIP: Concealed pinLatch: Knurled knob/key operated latch boltFinish: Paintable powder coatInsulation: 2” thick fire rated mineral fiber

Rough opening is door size + 1/4”.Interior latch release mechanism is standard.

PRODUCT GUIDE

BIFLANGE LATCH OPTIONSHEIGHTWIDTH

x

K KNURLED KNOB/KEY OPERATED LATCH BOLT M MORTISE LOCK PREP

LATCH


FLANGE

8” X 8” 10” X 10” 12” X 12” 12” X 18” 12” X 24” 14” X 14” 16” X 16” 18” X 18”

18” X 24” 20” X 30” 22” X 22” 22” X 30” 22” X 36” 24” X 24” 24” X 30” 24” X 36”

*24” X 48” *30” X 30” *32” X 32” *36” X 36” *36” X 48” *48” X 48”



OPTIONS

*Custom Sizes Available Upon Request

Always right there.

Babcock-Davis®


Fire-Rated • Insulated Access Doors

BIW: Tape In BIP: Plaster BIT: All Purpose

Babcock-Davis BU Series uninsulated, fire rated access doors provide access through openings in fire rated vertical surfaces and have a minimal sight line for a concealed appearance.BUL listed “B” label for 1-1⁄2 hours in vertical surfaces.BUT fire rated access doors provide access through fire rated vertical surfaces, in any material including drywall, plaster, and CMU.BUW fire rated access doors are manufactured with a tape in bead flange for a concealed appearance in vertical drywall surfaces, .BUP fire rated access doors are manufactured with plaster casing bead frames for a concealed appearance in vertical plaster surfaces.Door: 14-gauge cold rolled steelFrame: 16-gauge cold rolled steel BUT: 1” flange for all surfaces BUW: 22-gauge galv. drywall corner bead BUP: 22-gauge galv. plaster casing beadHinge: BUT: Flush continuous piano BUW: Concealed pin BUP: Concealed pinLatch: Knurled knob/key operated latch boltFinish: Paintable powder coatInsulation: None



PRODUCT GUIDE

BUFLANGE LATCH OPTIONSHEIGHTWIDTH

x

K KNURLED KNOB/KEY OPERATED LATCH BOLT M MORTISE LOCK PREP

LATCH


FLANGE

8” X 8” 10” X 10” 12” X 12” 12” X 18” 12” X 24” 14” X 14” 16” X 16” 18” X 18”

18” X 24” 20” X 30” 22” X 22” 22” X 30” 22” X 36” 24” X 24” 24” X 30” 24” X 36”

24” X 48” 30” X 30” 32” X 32” 36” X 36” 36” X 48”



OPTIONS

Always right there.

Babcock-Davis®


Fire-Rated • Non-Insulated Access Doors

BUW: Tape In BUP: Plaster BUT: All Purpose


BST: All Purpose

Babcock-Davis BS Series insulated, fire rated, security access doors are manufactured with heavy-duty materials to prevent unwanted access through openings in fire rated vertical surfaces. UL listed “B” label for 1-1⁄2 hours in vertical surfaces (maximum temperature rise to 250ºF in 30 min.). BST security fire rated access doors are manufactured with a one inch flange for installation in any vertical surface.BSW security fire rated access doors are manufactured with a tape in bead flange for a concealed appearance in vertical drywall.BSP security fire rated access doors are manufactured with a plaster casing bead flange for a concealed appearance on vertical plaster.Door: 14-gauge cold rolled steelFrame: 16-gauge cold rolled steel BST: 1” flange for all surfaces BSW: 22-gauge galv. drywall corner bead BSP: 22-gauge galv. plaster casing beadHinge: BST: Flush continuous piano BSW: Concealed pin BSP: Concealed pinLatch: Mortise preparation for 1-1/8” mortise cylinderFinish: Paintable powder coatInsulation: 2” thick fire rated mineral fiber


BSW: Tape In BSP: Plaster

PRODUCT GUIDE

BSFLANGE LATCH OPTIONSHEIGHTWIDTH

x

B BONDERIZED / GALVANIZED STEEL G GASKETING M MASONRY ANCHORS S T304 STAINLESS STEEL

OPTIONS

K KNURLED KNOB / KEY OPERATED LATCH BOLT M MORTISE LOCK PREP

LATCH


FLANGE

12” X 12” 16” X 16” 18” X 18” 22” X 30”

24” X 24” 24” X 36” 24” X 40” 24” X 48”


Always right there.

Babcock-Davis®


Security • Fire-Rated • InsulatedAccess Doors

Babcock-Davis BM Series non-rated, flush, security access doors provide access through vertical or horizontal surfaces and have a minimal sight line for a concealed appearance.BMT Series medium security access panels are manufactured with heavy-duty materials to prevent unwanted access, and a one inch flange for installation in any vertical or horizontal surface.BMW Series medium security access panels are manufactured with heavy-duty materials to prevent unwanted access, and a drywall bead frame for a concealed appearance on vertical or horizontal drywall surfaces.BMP Series medium security access panels are manufactured with heavy-duty materials to prevent unwanted access, and a plaster casing bead frame for a concealed appearance in vertical or horizontal plaster surfaces.Door: 12-gauge cold rolled steelFrame: 12-gauge cold rolled steel BMT: 1” flange for all surfaces BMW: 22-gauge galv. drywall corner bead BMP: 22-gauge galv. plaster casing beadHinge: Concealed continuous pianoLatch: Pinned allen head cam latch(es)Finish: Paintable powder coat


BMT: All PurposeBMW: Tape In BMP: Plaster

Shown with 1.125” mortise cylinder

PRODUCT GUIDE

BMFLANGE LATCH OPTIONSHEIGHTWIDTH

x

B BONDERIZED / GALVANIZED STEEL G GASKETING M MASONRY ANCHORS S T304 STAINLESS STEEL

OPTIONS

M MORTISE LOCK PREP P PINNED ALLEN HEAD CAM LATCHES S PINNED ALLEN HEAD SECURITY SCREWS

LATCH


FLANGE

8” X 8” 10” X 10” 12” X 12” 12” X 18” 12” X 24” 14” X 14” 16” X 16” 18” X 18”

18” X 24” 20” X 30” 22” X 22” 22” X 30” 24” X 24” 24” X 30” 24” X 36” 24” X 48”

24” X 48” 30” X 30” 30” X 36” 32” X 32” 36” X 36” 36” X 48”


Always right there.

Babcock-Davis®


Security • Non-Rated • Flush Access Doors

BHS: All PurposeBabcock-Davis BHS flush, security access doors control access through vertical or horizontal surfaces and are manufactured with detention grade materials.Door: 10-ga. cold rolled steelFrame: 2” x 2” x 3/16” steel angleHinge: Surface-mounted heavy-duty butt hingesLatch: Security screwsFinish: Paintable powder coat


PRODUCT GUIDE

BHSLATCH OPTIONSHEIGHTWIDTH

x

G GASKETING M MASONRY ANCHORS S T304 STAINLESS STEEL

OPTIONS

D DETENTION LOCK PREP M MORTISE LOCK PREP S SECURITY SCREWS

LATCH

12” X 12” 16” X 16” 18” X 18” 22” X 30”

24” X 24” 24” X 36” 24” X 40” 24” X 48”


Always right there.

Babcock-Davis®


High Security • Non-RatedAccess Doors

BTS: All PurposeBabcock-Davis BTS flush, security access doors control access through vertical or horizontal surfaces and are manufactured with detention grade materials. In addition, our formed door creates a return flange on the perimeter of the door to ensure flatness of material, and tamperproof edges (excellent for plumbing chases). Door: 7-ga. hot rolled steelFrame: 2” x 3” x 3/16” steel angleHinge: Surface-mounted heavy-duty butt hingesLatch: Detention lock preparationFinish: Paintable powder coat


PRODUCT GUIDE

BTSLATCH OPTIONSHEIGHTWIDTH

x

G GASKETING M MASONRY ANCHORS S T304 STAINLESS STEEL

OPTIONS

D DETENTION LOCK PREP M MORTISE LOCK PREP

LATCH

12” X 12” 16” X 16” 18” X 18” 22” X 30”

24” X 24” 24” X 36” 24” X 40” 24” X 48”


Always right there.

Babcock-Davis®


Top Security • Non-RatedAccess Door

Babcock-Davis BRU Series uninsulated access doors provide access through vertical surfaces in ceramic tile applications. When installed, the door and frame are completely concealed, providing an aesthetically pleasing appearance.BRU access doors can be mounted in any material including drywall, plaster, and CMU.Babcock-Davis BRU Series access door is designed to accept a tile up to 5/8” depth, including mastic, for a concealed appearance.UL listed “B” label for 1-1⁄2 hrs.Door: 14-ga bonderized/galvanized steelFrame: 16-ga bonderized/galvanized steelHinge: Cabinet typeLatch: Flush key operated lockFinish: None


Interior latch release mechanism is standard.

BRU: Concealed Panel for Tile

PRODUCT GUIDE

BRUFLANGE LATCH OPTIONSHEIGHTWIDTH

x

B BONDERIZED / GALVANIZED STEEL S T304 STAINLESS STEEL

OPTIONS

T 1” FLANGE W DRYWALL BEAD

FLANGE

K KNURLED KNOB / KEY OPERATED LATCH BOLT M MORTISE LOCK PREP

LATCH

8” X 8” 12” X 12” 16” X 16”

18” X 18” 24” X 24”


Always right there.

Babcock-Davis®


Recessed • Fire-RatedAccess Doors

BXT: Exterior

Babcock-Davis BX Series exterior access panels provide efficient and quick access in exterior applications, while keeping even the harshest of environments out of the building. Dual acting non-locking handles make it possible to open this door from the inside or outside. An exterior lockable handle is also available.Door: 20-ga galvanized steelFrame: .080” 6063-T5 extruded aluminumHinge: Stainless steel continuous pianoLatch: Dual acting, chrome-plated handle(s)Finish: Mill (Paint grip finish on door face panel)Insulation: Foam, 2.25 lb densityGasketing: Extruded santoprene

Rough opening equals door size.Shown with optional 1/4 turn latch

(Model BXTT1212)

Shown with optional locking handle

(Model BXTL2424)

PRODUCT GUIDE

BXTOPTIONS HEIGHTWIDTH

x

A NON-LOCKING HANDLE D D-RING L LOCKING HANDLE (EXTERIOR ONLY 1 PER DOOR) T 1/4 TURN LATCH P PADLCOK M MORTISE LOCK C THREE-POINT LATCH

OPTIONS

8” X 8” 12” X 12” 14” X 14” 18” X 18”

20” X 30” 24” X 24” 24” X 30” 24” X 36”


Always right there.

Babcock-Davis®


Exterior • Non-Rated Access Doors

BFRD: OversizedBabcock-Davis BFRD Series fire-rated, over-sized, double leaf access doors provide access through openings in fire-rated vertical or horizontal surfaces. The BFRD is the industry’s only fire rated access panel with sizes available larger than 24” x 36” in horizontal surfaces. The double leaf design has a removable mullion.

Door: 18-gauge cold rolled steelFrame: 16-gauge cold rolled steelHinge: Concealed continuous rod hingeLatch: 1/4” Allen head key with automatic panel closerFinish: Paintable powder coatInsulation: 1-1/2” non-combustible, high temperature

Rough opening is door size.


PRODUCT GUIDE

BFRDOPTIONSHEIGHTWIDTH

x

D DOUBLE DOOR M MORTISE LOCK PREP S T304 STAINELESS STEEL T 3-HOUR RATED C CEILING APPLICATION W WALL APPLICATION

OPTIONS

36” X 48” 48” X 36”

48” X 48” 60” X 48”


Always right there.

Babcock-Davis®


Oversized • Fire-RatedAccess Doors

Babcock-Davis BLW Lightweight, non-rated, insulated access door offers a solution to larger openings in vertical or horizontal applications available in both pre-finished, embossed, galvanized steel, and aluminum.Door: 26-gauge pre-finished embossed galvanized steel (Optional .063 aluminum panel insert)Frame: .045 6063-T5 extruded aluminumHinge: Aluminum continuous piano hingeLatch: Screwdriver cam latchFinish: White embossed steelFlange: Rolled 1-5/16” wideInsulation: 3/4” polystyrene with 3.8 R-value at 75°F


BLW: All Purpose

PRODUCT GUIDE

BLWLATCH OPTIONSHEIGHTWIDTH

x

T SCREWDRIVER CAM LATCH L KEY OPERATED CAM LATCH

LATCH

12” X 12” 24” X 36” 48” X 48” 18” X 18” 24” X 48” 60” X 48” 22” X 30” 30” X 30” 72” X 48” 22” X 36” 30” X 36” 24” X 24” 36” X 36”


A ALUMINUM INSERT PANEL G GASKETING

OPTIONS

Always right there.

Babcock-Davis®


Lightweight • Non RatedAccess Doors

BFRU: Upward OpeningBabcock-Davis BFRU access panels are for those special installation circumstances when the door of the access panel must swing upward or inward. The BFRU is available with a Warnock Hersey 2 or 3 hour fire rating. Door: 18-gauge cold rolled steelFrame: 16-gauge cold rolled steelHinge: Concealed continuous pianoLatch: 1/4” Allen head key with optional automatic panel closerFinish: Paintable powder coatInsulation: Non-combustible, high temperature



PRODUCT GUIDE

BFRUOPTIONSHEIGHTWIDTH

x

B BONDERIZED / GALVANIZED STEEL G GASKETING M MORTISE LOCK PREP S T304 STAINELESS STEEL

OPTIONS

24” X 48” 30” X 30” 30” X 36”

30” X 48” 32” X 32” 36” X 36”


PRODUCT GUIDE

BIUAOPTIONSHEIGHTWIDTH

x

B BONDERIZED / GALVANIZED STEEL G GASKETING M MORTISE LOCK PREP S T304 STAINELESS STEEL

OPTIONS

12” X 12” 14” X 14” 18” X 18”

22” X 22” 22” X 36” 24” X 36”


Always right there.

Babcock-Davis®


Upward Opening • Fire-RatedAccess Doors

Babcock-Davis BDTK self closing, self latching access panels provide access through draft stops in attic spaces. They prevent back draft from one section of an attic to another. This standard non-rated access door is self-closing and allows for access from both sides of the door.Door: 14-gauge cold rolled steelFrame: 16-gauge cold rolled steelHinge: Flush continuous pianoLatch: Knurled knob/key operated latch boltFinish: Paintable powder coatFlange: 1” flange for all surfaces


BDTK: Draft Stop


PRODUCT GUIDE

BDTKOPTIONSHEIGHTWIDTH

x

B BONDERIZED / GALVANIZED STEEL G GASKETING S T304 STAINELESS STEEL

OPTIONS

22” X 36” 24” X 48” 24” X 48” 24” X 60”

30” X 30” 30” X 36” 36” X 36” 36” X 48”


Always right there.

Babcock-Davis®


Draft Stop • Non RatedAccess Doors

BPL: Plastic Babcock-Davis BPL plastic access doors provide simple and inexpensive access through a vertical or horizontal surface in residential or light-duty applications. The lightweight design with a removable door is easily installed by applying glue or adhesive to the back of the frame.Door: 1/8” high impact styrene plastic removable doorFrame: Reversible 3/4” flange frameLatch: Snap latches securing doorFinish: Texturized white finish

PRODUCT GUIDE

4” X 6” 8” X 8” 14” X 29” 6” X 9” 14” X 14”


BPLHEIGHTWIDTH

x

Always right there.

Babcock-Davis®


Plastic • Non RatedAccess Doors

Options

Always right there.

Babcock-Davis®


Access Doors

B Galvanized Bonderized SteelWith primer coat. Use where a more corrosion resistant material is required.

S Stainless Steel Type #304With #4 satin polish finish. Use in areas that require the highest level of corrosion resistance. Can also be used in areas where a polished stainless steel look is desired.

D Double Leaf Access PanelWhen you need access to large openings, we recommend double leaf panels for easy use.

C Drip Cap on Frame*Directs running water away from the face of the panel.

G GasketingApplied to the doorstops to provide weather resistance and reduces airflow between the panel and frame. Also available with UL listed smoke seal.

H Continuous Piano HingeProvides specification compliance when required.

L Louvered Door*Provides ventilation for special applications.

M Masonry AnchorsAttached to the frame to secure the panel when installed in masonry.

Z Concealed Continuous Piano HingeProvides added security while maintaining an appealing appearance.

*Not available on fire rated doors or BXT, BFRD, BFRU, BPL.

C Screwdriver Operated Cam Latch*Most commonly used. For standard applications.

K Knurled Knob/ Key Operated Latch BoltPatented ball bearing latch bolt operated by a screw-in type knurled knob or flush key. This is the standard latching mechanism on our fire rated models.

L Key Operated Cam Lock*When locks are required, it provides an economical solution for controlled access.

M Mortise Cylinder Lock PreparationProvides a high level of security and matches the project hardware. The panel accepts a standard 1.125” mortise cylinder by most lock manufacturers (Best, Corbin, Russwin, Schlage, etc.)

H Hex Head Cam Latch*Requires a standard allen wrench to open the panel.

P Pinned Hex Head Cam Latch*For more secure applications – requires a special pinned allen wrench to open the panel.

S Security Screw – Pinned Hex Head*Highest security without a lock – requires special pinned allen wrench to open the panel.

D Detention Lock PreparationFor heavy-duty detention deadbolt lock. Used in maximum security applications.

N Knurled Knob Cam Latch*Unrestricted access – no tool required. Finger operated.

1.0

9300 73rd Avenue North, Brooklyn Park, MN 55428 www.BabcockDavis.com PH: 888.412.3726 FX: 888.312.3726

Access Doors

Always right there.

Babcock-Davis®

Documents

Access Doors - Sweets · 2015. 9. 16. · BRU: Fire-Rated Recessed Tiled BM: Non-Rated Flush Security Babcock-Davis Access Doors & Panels are manufactured to solve a myriad of access