Embed Size (px)
Citation preview
Acceleration Sensor 2g BG 2168.2-2U/I, BG 2168.2-2U/I, BG 2168.2-1U/IT1, BG2168.2-2U/IT1 BG2168 is a small inexpensive acceleration sensor for fast data acquisition with integrated data conditioning in a full encapsulated housing (IP66). It is available with one or two axles, voltage or current output and low pass.
*1) at max. 3dB near of limit frequency, up to 2kHz at request
*2) plus driver current,
*3) Ub >> ( RLast * IOut + 6V)
*4) IP67 at request,
*5) at 25 °C,
*6) low pass -> drawing
Order Information: BG2168.2-1U Art.-Nr. 6210.01-5.01 one axle, voltage
BG2168.2-1UT1 Art.-Nr. 6210.01-6.01 one axle, voltage, low pass
BG2168.2-1I Art.-Nr. 6210.02-5.01 one axle, current
BG2168.2-1IT1 Art.-Nr. 6210.02-6.01 one axle, current, low pass
BG2168.2.2U Art.-Nr. 6210.03-5.01 two axles, voltage
BG2168.2-2UT1 Art.-Nr. 6210.03-6.01 two axles, voltage, low pass
BG2168.2-2I Art.-Nr. 6210.04-5.01 two axles, current
BG2168.2.2IT1 Art.-Nr. 6210.04-6.01 two axles, current, low pass
Options:
Cable Set Article Number
cable set 1m 3 pol. Art.-No. 6503.01-5.01
cable set 1m 4 pol. Art.-No. 6503.01-5.11
… w tension relief
cable set 1m 3 pol. Art.-No. 6503.02-5.01
cable set 1m 4 pol. Art.-No. 6503.02-5.11
Type BG 2168.2-XU BG 2168.2-XI
Measuring Range ±2 ±2 g
Shock resistance >1000 >1000 g
Frequency Range *2)*6)
0…50 0…50 Hz
Cross sensitivity 0,05 0,05 g/g
Resolution 2 2 mg
Temperature Range -40…+85 -40…+85 °C
Zero Point Offset *5)
5 5 %
Sensitivity Error *5)
<±2 <±2 %
Hysteresis *5)
----- -----
Linearity *5)
<±3% <±3% of final value
Operating Voltage 7 … 24 7 … 24 VDC*2)
Power Consumption ca. 1 ca. 2,5 mA*3)
Output Signal *1)
voltage 0,5…4,5V current 4…20 V
Signal at 0g 2,5V 12 mA
Sensitivity 1000mV/g 4,0 mA/g
Protection Class IP66*5)
IP66*5)
march 2010 – subject to change
colors
3-wire 4-wire
Pin 1 yellow Pin 2 green green Pin 3 brown brown Pin 4 white white
a = ( Uout – 2,5V ) / 1V a = ( Iout – 12mA ) / 4 mA a : acceleration in g Uout: output voltage (BG2168.2-2U)
Iout: output current (BG2168.2-2I)
Connections: Pin 1 output axle Y Pin 2 output axle X Pin 3 ground Pin 4 power supply
Housing is resistent against *):
- Fuels - Oils - Salts - certain chemicals *)
please request list
M+S Mikrotechnik und Sensorik GmbH Heinrich-Hertz-Straße 8 07629 Hermsdorf Tel: +49 36601 592-250 Fax: +49 36601 592-251 Email: [email protected] Web: www.mikrosensor.de
drawing low pass T1
X+
X-
Y+ Y-
