Upload
rocasm88
View
112
Download
2
Embed Size (px)
DESCRIPTION
Artioscad
Citation preview
1
May 20th, 2013 2.30-3.30pm
May 22nd, 2013 9.00-10.00am
AC-16
ArtiosCAD Standards
Raghav Kota
Application Engineer
2
Using Style Maker to Make Parametric Designs
Use Variables instead of Values
Variable names can be up to 6 characters in length
Variables can be Letters and Numbers but must begin with a letter
Use Multiple Menus
Menus can be of different type, i.e. Variable, Style Choice, Pre-Calculated
Use of Check Conditions & Library Functions
Use of Text Variables
Ability to copy Variables from other workspaces
Please Attend AC-18 and AC-19 for more info on Stylemaker and Adv.Stylemaker
3
Mathematical Statements
Order of Operation
( X+N ) Items in parentheses are evaluated first
POWER(X,N) Powers are evaluated second
X*N Multiplication
X/N Division
X+N Addition
X-N Subtraction
Examples
L>0 L is greater than 0 L0 AND L
4
ArtiosCAD Standards
What are Standards?
Standards are parametric (re-buildable) designs provided by ArtiosCAD
Which contains FEFCO, ECMA and ArtiosCAD Designs for corrugated, Folding Carton and Packaging industries.
These designs are re-buildable and can be saved as a revision
More Standards have been included in ArtiosCAD version 12.0.1
www.help.esko.com has online downloadable PDF for the Style Catalogue
By giving initial values to the assigned variables of a given standard the drawings can be created even without using any tools
Further changes can be done to a standard using the appropriate tool sets.
5
What Changes can we make to an Existing Standard?
Standards can be re-named to your company terminologies
Standard Defaults can be pre-set to your company Spec.
Tolerances/allowances can be changed to match your machines( flexo, die-cutter etc..)
Board Grades Should be Created to match your Company Standards
(use Data-center to make your own Board Grades with appropriate cal,il,og,crrv)
6
Modifying a Standard
In this exercise well create a new design from the existing ArtiosCAD Standard and modify the formulas to match what works for you.
A good example is 2 sided rollover with ears.
Lets modify this standard and save it in the catalog as your own company standard.
7
Creating New Standards from Existing ArtiosCAD
Standards
1. Select File, Run a Standard, Corrugated, ArtiosCAD Corrugated, 2 Sided rollover-Ears.
2. Select a Parameter set and Board.
3. Type in a value for Length, Width and Depth and select OK.
8
Creating New Standards from Existing ArtiosCAD
Standards
When the design rebuilds, it should look something like the image below. However, it probably doesnt match your company specs. We can use Adv.Stylemaker to change the defaults to match what you use.
9
Lets see what are the changes that we can make to this standard
Flip the one-up 90 degrees to the left or the right.
Add dimensions to the existing design
Make the rollovers tighter RO2
Make the slots tighter to match the rollover SD2
Increase the tab depth to get a better lock TD2
Creating New Standards from Existing ArtiosCAD
Standards
10
Creating New Standards from Existing ArtiosCAD
Standards
Rotate the one-up by 90 degrees so that the corrugation direction runs across the rollovers.
Add the dimensions to the one-up
The added dimensions maintains the font and the position of the dimensions in the standard.
Re-build the standard and make changes to the style choice menu.
11
Creating New Standards from Existing ArtiosCAD
Standards
Lets also change the Default Formula for variable RO2 to (2*IL)+CAL.
Also change the formula for TD2 and SD2
12
Creating New Standards from Existing ArtiosCAD
Standards
Since we flipped the standard by 90 degrees we need to change the preview screen as well.
So lets go ahead and create a new diagram
13
Creating New Standards from Existing ArtiosCAD
Standards
In the Preview Layer you can also add Annotation, Variable Names, 3D Diagram etc..
14
Creating New Standards from Existing ArtiosCAD
Standards
When you are satisfied with the changes you made in Stylemaker, save the design in the ServerLib folder as 2 Sided rollover with ears.ARD
Select Options, Defaults.
In Shared Defaults, right click on the on the Style Catalog folder. In the fly out select New, Folder.
Name the Folder My Company Standards.
Right click on the My Company Standards folder. In the fly out select New, Data.
Name the Data 2 Sided rollover with ears
Close and save Defaults
15
Questions?
16
Thank You for Attending!!