Embed Size (px)
Citation preview
ABVSeries BT2
Side Entry Trunnion Mounted Ball Valves
AVAILABLE SIZES & RATING
• NS 1/2” ÷ 4” ASME 150 ÷ 4500# Full and reduced bore• NS 1/2” ÷ 4.1/16” API 2000 ÷ 15000 Full and reduced bore
CHARACTERISTICS
• Trunnion Mounted Ball Valves, withball hinged on supports and floatingmetal or soft seats.
• Pressure range: from ASMEClass 150 to ASME Class 4500,and from API Class 2000 to APIClass 15000.
• Temperature range:from –46°C to 450°C.
• On request possibility to use in cryogenic conditions (temperaturesup to –196°C ).
• Two Pieces Forged Steel Valves.• Low pressure loss through the valve.• Low actuation torque.• “CE” marking in compliance with PED
Directive 97/23/EC.• Full bore or Reduced bore.• Different kinds of end connections
(RF/RTJ Flanges, Butt Weld, ClampConnection, Socket Welding).
• Wide availability of materials depending on the specifications (carbon steel, stainless steel or duplex steel for service in corrosiveenvironments, Chrome-Molybdenumalloy steel for high temperature service, etc.).
• Materials with anti-corrosion properties according to NACEMR 0175.
• On request, seat pocket area overlay,seal area overlay, or completed cladding on wetted surface (weldedoverlays in Inconel 625, Stainless Steel 316, etc., or Electroless NickelPlating).
• Suitable for manual (wrench of gear)or motorized actuation (hydraulic, pneumatic, gas-over-oil or electric actuator).
ABV Series BT2 - Page 01
Design and dimensions may be subject to change without notice, except the dimensions established by international standard specifications.
© ABV. No part of this document can be reproduced without ABV written authorization. -Rev. 1.0-
DESCRIPTION
1. Closure2. Body Stud-Nut3. Seat Ring4. Body5. Adapter Flange6. Seat Spring7. Ball8. Gland Flange Cap Screw9. Trunnion Cap Screw10. Seat Insert11. Stem12. Trunnion13. Gland Flange Back-Up Ring14. Gland Flange15. Gland Flange O-Ring16. Trunnion Thrust Washer17. Stem Thrust Washer18. Body Stud19. Trunnion Gasket20. Body Stud21. Stem O-Ring22. Body Gasket23. Seat O-Ring24. Seat Back-Up Ring25. Seat Gasket26. Body Back-Up Ring27. Body O-Ring28. Gland Flange Gasket29. Stem Key30. Stem Gsket31. Adapter Flange Bushing32. Cap Screw33. Stem Back-Up Ring34. Trunnion Back-Up Ring35. Trunion O-Ring
ABV Series BT2 - Page 02
ABVSeries BT2Side EntryTrunnion MountedBall Valves
Design and dimensions may be subject to change without notice, except the dimensions established by international standard specifications.
© ABV. No part of this document can be reproduced without ABV written authorization. -Rev. 1.0-
ABVSeries BT2Side Entry Trunnion Ball ValvesFull Bore
NOMINAL SIZE BORE FLANGE END TO END OTHER DATANS DN Φ B Φ F A-RF A-WE A-RJ C D E ΦV ΦT P Weight (kg)
Class 150 LBS
1/2” 15 14 89 108 140 - 75 135 276 - - 95 83/4” 20 19 98 117 152 - 75 135 276 - - 95 101” 25 25 108 127 165 140 73.3 143.3 276 - ISO F10 88.8 14
1.1/2” 40 38 127 165 191 178 90 165 300 300 ISO F10 110 182” 50 51 152 178 216 191 100 170 300 300 ISO F10 120 263” 80 76 191 203 283 216 125 215 400 300 ISO F14 150 424” 100 102 229 229 305 241 155 245 550 300 ISO F14 165 63
Class 300 LBS
1/2” 15 14 95 140 140 151 75 135 276 - - 95 83/4” 20 19 118 152 152 165 75 135 276 - - 95 101” 25 25 124 165 165 178 75 135 276 - - 95 14
1.1/2” 40 38 156 191 191 203 90 165 300 300 ISO F10 110 222” 50 51 165 216 216 232 100 170 300 300 ISO F10 120 303” 80 76 210 283 283 298 125 215 400 300 ISO F14 150 554” 100 102 254 305 305 321 155 245 550 300 ISO F14 165 72
Class 600 LBS
1/2” 15 14 95 165 165 165 75 135 276 - - 95 103/4” 20 19 118 191 191 191 75 135 276 - - 95 131” 25 25 124 216 216 216 75 135 276 - - 95 18
1.1/2” 40 38 156 241 241 241 90 165 400 300 ISO F10 110 292” 50 51 165 292 292 295 100.6 173.4 400 300 ISO F10 118.9 353” 80 76 210 356 356 359 125 215 600 300 ISO F14 150 654” 100 102 273 432 432 435 155 262 850 300 ISO F14 175 85
Dimensions (mm):
ABV Series BT2 - Page 03
ΦF
E
A
DC
ΦB
ΦV
DP
NOMINAL SIZE BORE FLANGE END TO END OTHER DATANS DN Φ B Φ F A-RF A-WE A-RJ C D E ΦV ΦT P Weight (kg)
NOMINAL SIZE BORE FLANGE END TO END OTHER DATANS DN Φ B Φ F A-RF A-WE A-RJ C D E ΦV ΦT P Weight (kg)
Design and dimensions may be subject to change without notice, except the dimensions established by international standard specifications.
© ABV. No part of this document can be reproduced without ABV written authorization. -Rev. 1.0-
ABVSeries BT2Side Entry Trunnion Ball ValvesFull Bore
NOMINAL SIZE BORE FLANGE END TO END OTHER DATANS DN Φ B Φ F A-RF A-WE A-RJ C D E ΦV ΦT P Weight (kg)
Class 900 LBS
1/2” 15 14 121 216 216 216 75 135 276 - - 95 183/4” 20 19 130 229 229 229 75 135 276 - - 95 251” 25 25 149 254 254 254 75 135 276 - - 95 31
1.1/2” 40 38 178 305 305 305 90 170 400 300 ISO F10 110 422” 50 51 216 368 368 371 100 180 400 300 ISO F10 120 603” 80 76 241 381 381 384 121 220 - 300 ISO F14 150 824” 100 102 292 457 457 460 155 280 - 500 ISO F14 175 115
Class 1500 LBS
1/2” 15 14 121 216 216 216 75 135 276 - - 95 183/4” 20 19 130 229 229 229 75 135 276 - ISO F10 95 251” 25 25 149 254 254 254 75.3 132.7 276 - - 92.7 31
1.1/2” 40 38 178 305 305 30 95 170 400 300 ISO F10 110 422” 50 51 216 368 368 371 95.1 173.4 400 300 ISO F10 118.9 603” 80 76 267 470 470 473 130 220 - 300 ISO F14 155 1034” 100 102 311 546 546 549 160 285 - 500 ISO F16 180 185
Class 2500 LBS
1/2” 15 14 133 264 264 264 85 165 400 - - 106 243/4” 20 19 140 273 273 273 85 165 400 - - 106 301” 25 25 159 308 308 308 85 165 400 - - 106 38
1.1/2” 40 38 203 384 384 387 115 220 600 300 ISO F14 145 582” 50 44 235 451 451 454 117.7 212.4 600 300 ISO F14 157.9 963” 80 63 305 578 578 584 159 280 - 500 ISO F16 188.4 2054” 100 89 356 673 673 683 201.1 340 - 500 ISO F25 229.9 345
Dimensions (mm):
ABV Series BT2 - Page 04
ΦF
E
A
DC
ΦB
ΦV
DP
NOMINAL SIZE BORE FLANGE END TO END OTHER DATANS DN Φ B Φ F A-RF A-WE A-RJ C D E ΦV ΦT P Weight (kg)
NOMINAL SIZE BORE FLANGE END TO END OTHER DATANS DN Φ B Φ F A-RF A-WE A-RJ C D E ΦV ΦT P Weight (kg)
Design and dimensions may be subject to change without notice, except the dimensions established by international standard specifications.
© ABV. No part of this document can be reproduced without ABV written authorization. -Rev. 1.0-
ABVSeries BT2Side Entry Trunnion Ball ValvesReduced Bore
NOMINAL SIZE BORE FLANGE END TO END OTHER DATANS DN Φ B Φ F A-RF A-WE A-RJ C D E ΦV ΦT P Weight (kg)
Class 150 LBS
3/4”x1/2” 20x15 14 98 117 152 - 75 135 276 - - 95 101”x3/4” 25x20 19 108 127 165 140 75 135 276 - - 95 14
2”x1.1/2” 50x40 38 152 178 216 191 90 165 300 300 ISO F10 110 243”x2” 80x50 51 191 203 283 216 100 170 300 300 ISO F10 120 384”x3” 100x80 76 229 229 305 241 125 215 400 300 ISO F14 150 556”x4” 150x100 102 279 394 457 406 155 245 550 300 ISO F14 165 89
Class 300 LBS
3/4”x1/2” 20x15 14 118 152 152 165 75 135 276 - - 95 101”x3/4” 25x20 19 124 165 165 178 75 135 276 - - 95 14
2”x1.1/2” 50x40 38 165 216 216 232 90 165 300 300 ISO F10 110 273”x2” 80x50 51 210 283 283 298 100 170 300 300 ISO F10 120 514”x3” 100x80 76 254 305 305 321 125 215 400 300 ISO F14 150 656”x4” 150x100 102 318 403 403 419 155 245 550 300 ISO F14 165 98
Class 600 LBS
3/4”x1/2” 20x15 14 118 165 165 165 75 135 276 - - 95 101”x3/4” 25x20 19 124 216 216 216 75 135 276 - - 95 18
2”x1.1/2” 50x40 38 165 292 292 295 90 165 400 300 ISO F10 110 303”x2” 80x50 51 210 356 356 359 100 170 400 300 ISO F10 120 604”x3” 100x80 76 273 432 432 435 125 215 600 300 ISO F14 150 886”x4” 150x100 102 356 559 559 562 155 275 - 300 ISO F14 175 165
Dimensions (mm):
ABV Series BT2 - Page 05
ΦF
E
A
DC
ΦB
ΦV
DP
NOMINAL SIZE BORE FLANGE END TO END OTHER DATANS DN Φ B Φ F A-RF A-WE A-RJ C D E ΦV ΦT P Weight (kg)
NOMINAL SIZE BORE FLANGE END TO END OTHER DATANS DN Φ B Φ F A-RF A-WE A-RJ C D E ΦV ΦT P Weight (kg)
Design and dimensions may be subject to change without notice, except the dimensions established by international standard specifications.
© ABV. No part of this document can be reproduced without ABV written authorization. -Rev. 1.0-
ABVSeries BT2Side Entry Trunnion Ball ValvesReduced Bore
NOMINAL SIZE BORE FLANGE END TO END OTHER DATANS DN Φ B Φ F A-RF A-WE A-RJ C D E ΦV ΦT P Weight (kg)
Class 900 LBS
3/4”x1/2” 20x15 14 130 229 229 229 75 135 276 - - 95 251”x3/4” 25x20 19 149 254 254 254 75 135 276 - - 95 31
2”x1.1/2” 50x40 38 216 368 368 371 90 170 400 300 ISO F10 110 553”x2” 80x50 51 241 381 381 384 100 180 400 300 ISO F10 120 764”x3” 100x80 76 292 457 457 460 125 220 - 300 ISO F14 150 1026”x4” 150x100 102 381 610 610 613 155 280 - 500 ISO F14 175 220
Class 1500 LBS
3/4”x1/2” 20x15 14 130 229 229 229 75 135 276 - - 95 181”x3/4” 25x20 19 149 229 229 229 75 135 276 - ISO F 10 95 25
2”x1.1/2” 50x40 38 216 368 368 371 95 170 400 300 ISO F 10 110 553”x2” 80x50 51 267 470 470 473 105 180 400 300 ISO F 10 120 984”x3” 100x80 76 311 546 546 549 130 220 - 300 ISO F 14 155 1426”x4” 150x100 102 394 705 705 711 160 285 - 500 ISO F 16 180 310
Class 2500 LBS
3/4”x1/2” 20x15 14 140 273 273 273 85 165 400 - - 106 301”x3/4” 25x20 19 159 308 308 308 85 165 400 - - 106 38
2”x1.1/2” 50x40 38 235 451 451 454 115 220 600 300 ISO F14 145 903”x2” 80x50 44 305 578 578 584 125 230 600 300 ISO F14 150 1824”x3” 100x80 63 356 673 673 683 155 280 - 500 ISO F16 185 3056”x4” 150x100 89 483 914 914 927 195 340 - 500 ISO F25 230 548
Dimensions (mm):
ABV Series BT2 - Page 06
ΦF
E
A
DC
ΦB
ΦV
DP
NOMINAL SIZE BORE FLANGE END TO END OTHER DATANS DN Φ B Φ F A-RF A-WE A-RJ C D E ΦV ΦT P Weight (kg)
NOMINAL SIZE BORE FLANGE END TO END OTHER DATANS DN Φ B Φ F A-RF A-WE A-RJ C D E ΦV ΦT P Weight (kg)
Design and dimensions may be subject to change without notice, except the dimensions established by international standard specifications.
© ABV. No part of this document can be reproduced without ABV written authorization. -Rev. 1.0-
ABVSeries BT2Side Entry Trunnion Ball ValvesFull Bore
NOMINAL SIZE BORE FLANGE FLANGE END TO END OTHER DATANS DN Φ B Φ F Φ F A-RJ C D E ΦV ΦT P Weight (kg)
Class API 2000
2.9/16”x2.1/16” 65x52 52 190 - 333 100 170 400 300 - 120 543.1/8”x2.9/16” 78x65 65 210 - 359 125 200 - 300 - 150 614.1/16”x3.1/8” 103x78 79 275 - 435 125 215 600 300 - 150 88
Dimensions (mm):
ABV Series BT2 - Page 07
ΦF
E
A
DC
ΦB
ΦV
DP
Type 6 B Type 6BX
NOMINAL SIZE BORE FLANGE FLANGE END TO END OTHER DATANS DN Φ B Φ F Φ F A-RJ C D E ΦV ΦT P Weight (kg)
Class API 3000
2.9/16”x2.1/16” 65x52 52 245 - 422 100 180 400 300 - 120 823.1/8”x2.9/16” 78x65 65 240 - 384 125 200 - 300 - 150 764.1/16”x3.1/8” 103x78 79 295 - 460 125 220 - 300 - 150 101
Type 6 B Type 6BX
NOMINAL SIZE BORE FLANGE FLANGE END TO END OTHER DATANS DN Φ B Φ F Φ F A-RJ C D E ΦV ΦT P Weight (kg)
Class API 5000
2.9/16”x2.1/16” 65x52 52 245 - 473 105 180 400 300 - 120 823.1/8”x2.9/16” 78x65 65 270 - 473 125 200 - 300 - 150 924.1/16”x3.1/8” 103x78 79 310 - 549 130 220 - 300 - 155 168
Type 6 B Type 6BX
NOMINAL SIZE BORE FLANGE FLANGE END TO END OTHER DATANS DN Φ B Φ F Φ F A-RJ C D E ΦV ΦT P Weight (kg)
Class API 10000
2.1/16”x1.13/16” 52x46 46 - 200 454 165 195 950 300 - 110 842.9/16”x2.1/16” 65x52 52 - 230 495 165 195 - 300 - 120 1613.1/16”x2.9/16” 78x65 65 - 270 620 200 270 - 300 - 120 2034.1/16”x3.1/16” 103x78 78 - 315 671 290 380 - 500 - 150 330
Type 6 B Type 6BX
Design and dimensions may be subject to change without notice, except the dimensions established by international standard specifications.
© ABV. No part of this document can be reproduced without ABV written authorization. -Rev. 1.0-
