ABTRONIC™NARL™ USER MANUAL PAGE 1 · ABTRONIC™NARL™ USER MANUAL PAGE 13 ABTRONIC™NARL™ PLACEMENT: ABTRONIC™NARL™ is designed to achieve maximum results. Follow the

PAGE 1ABTRONIC™NARL™ USER MANUAL

USER MANUAL

PAGE 2 ABTRONIC™NARL™ USER MANUAL

Congratulations on your choice of the ABTRONIC™ NARL™ patented slimming technology. Please read this manual before first use.

DEVICE DESCRIPTION

The ABTRONIC™NARL™ combines the patented NARL ultrasound technology with the proven AbTronic EMS technology.It combines beneficial Electro Muscle Stimulation (EMS) pulses with advanced and safe ultrasound signals in an easy to use unit. The AbTronic™NARL™ unit generates very specific ultrasound waves with each of the NARL™pads to stimulate the target areas, it further sends gentle electrical pulses to each of the NARL™ pads which cause your muscle to contract and then relax. These impulses are designed to copy the natural nerve signals to obtain efficient and actual muscular contractions.

To achieve best results, we recommend light exercise like walking or even housework after the NARL ultrasound stimulation.


CONTENTS:

1 x Control unit4 x NARL™pads1 x Micro USB charging cable4 x Conductive gel pads2 x Elastic belt2 x Soft & Elastic Hook1 x Carry bag1 x Manual1 x Quick start guide


UNIT

Connectors for NARL™ pads.Pair 1&2 (black & white) and 3&4

(black & white) for EMS outputWhen no NARL™ pad is connected

the LCD will fast blink!

1 2 3 4

LCD Display

Control buttons

Micro USB jack for recharging batteryFor standard USB charger with 5V output

Connectors for NARL™ pads


LCD DISPLAY

To give an additional NARL ultrasound output indication the unit will vibrate lightly during NARL ultrasound output.When no NARL™ pads are connected the unit will not function and the LCD will fast blink!

Ultrasound Module

(transducer)

EMS stimulation area

NARL™ PADS

EMS indicatorSlow blinking =

EMS output

Rechargeable battery level indicator Mode A

EMS output level

Mode 1

Mode B

Timer solid = operationBlinking = paused operation

Mode 2

NARL ultrasound indicator

Slow blinking =Ultrasound

outputSONIC

MIN

NARL 10 EMS A 30

EMS B 30N10+E10EMS


CONTROLS

Mode 2

EMS output level adjustment

Mode 1

Press & hold for 2 seconds to switch the

unit on or off

Mode A

Mode B

Press M followed by any mode button to switch mode during operation

Start / Pause button


AUTO FUNCTIONSA self-timer switches the unit off after 20 seconds of no operation.If the unit is paused it will switch off after 1 min 20 secs of pause.The LCD display switch off to save power after 20 seconds.When no NARL™ pad is connected to the device & stick to the skin the LCD will fast blink when is pressed and not function. Connect at least one pad for NARL function and one pair black and white pads for EMS function to work!

Press and hold the on/off button for 2 seconds to switch the unit on or off

Press the start/pause button to start or pause the selected modeRemark: Default mode after the unit is switched on is mode 2

Press the M button followed by any of the 4 mode buttons (1,2,A,B) to change the mode

Decrease / increase EMS output level during EMS operation from level 0-9.

Selects NARL ultrasound modeSelects EMS only mode

&&


BATTERY

The unit has a built in rechargeable Lithium Polymer battery. Recharge the battery by plugging a micro USB cable from a standard 5V 1A USB power source into the unit.The Battery icon will flash during charging when the device is ON and display a solid battery icon when fully charged. The unit can operate several hours on a fully charged battery.


BEFORE FIRST USE:

Charge the unit until the battery indicator is solid, indicating the batteries are fully charged. The device must be turned ON in order to see the battery indicator.

Plug the connectors of the NARL™ pads into the unit observing the black and white colour indicators on the unit.

Remark: For EMS operation a positive and negative electrode (indicated by black and white) have to be paired.

Connectors for NARL™ pads.Pair 1&2 (black & white) and 3&4

(black & white) for EMS output

1 2 3 4


1. Take the gels pads out of the bag and peel off one side of the protective film which has no wording from the gel pad.

2. Stick the gel pads onto each of the 4 conductive areas on the rear side of the NARL™ pad.

* Please make sure the gel pad has protective film, which has no wording, is stick onto the stimulation pad• If there is an air bubbles under the gel pads use a finger

and press the air to the side of the pad to escape.

� Do not use damaged, worn or dirty gel pads as this might result in burns.

� Always, stick gel pads to all electrodes while using the product. Don’t apply the product directly to skin, this may be painful or cause irritation or burns.

Precautions

APPLYING GEL PADS


3. After affixing all gel pads properly, peel off the remaining film, which has wording, and ready to stick on your skin

4. Clean the area of your skin you want to affix the gel pads on from any excessive oil before affixing the pads.

• Do not peel off the gel pad affixed to the electrode, until you need to replace them with new ones!

5. Gel pad StorageAfter use, stick the ABTRONIC™NARL™ pads with the gel pads attached onto the storage boards. This prevents the gel pads getting dirty, while not in use.


Removing Gel Pads1. Only remove the gel pads if you need to replace

them with new ones.2. Turn off the product before removing the gel

pad. Otherwise this may cause pain or irritation.3. Peel off the complete gel pad slowly in one

piece.• Remove any remaining gel on the

electrodes.


ABTRONIC™NARL™ PLACEMENT:

ABTRONIC™NARL™ is designed to achieve maximum results.Follow the warnings and precautions in this manual when using the unitThe NARL™ pads can be placed in many different areas on the body, thus allowing more specific targeting of problem areas and muscle groups.

The unit has 4 NARL™pads to plug into the control unit (please observe the colours and always pair black and white pads for EMS stimulation).

For the EMS stimulation you can move the pads around to find the optimum location where the strongest contraction is felt. You can attach the NARL™pads together for more convenient use, the unit comes further with 2 soft and elastic hook and loop belts to fasten the NARL™ pads more securely during use.

You can combine the belts to one long belt when securing the pads around your body.

The diagrams in this booklet are provided as a starting recommendation only and apply to male and female


users. The AbTronic™NARL™ is a personalized training tool and can be adapted to suit each individual user. The diagrams shown use letters to indicate recommended placement. Place the NARL™ pads on your problem areas for NARL™ stimulation, or move them around to achieve best muscle contractions.


ADiaphramTargets the upper abdomenFor EMS stimulation around the stomach will contractThe arrows indicate the EMS electro flow direction.

BAbsTargets the main abdominal area and muscles


CLower AbsTargets the lower abdomen area and muscles

DWaistTargets the “love handle” girth area and muscles.

EUpper buttocksTargets upper buttock area and muscles


FButtocksTargets buttock area and muscles

GUpper legsTargets upper leg area and muscles

HUpper ThighsTargets upper thigh area and muscles


IFront ThighsTargets thigh and knee area and muscles

JInner ThighTargets inner thigh area and muscles

KCalvesTargets calves area and muscles


LShouldersTargets shoulder area and muscles

MArms / BicepsTargets biceps area and muscles

NArms / TricepsTargets triceps area and muscles


OLower armsTargets lower arm area and muscles

Attention:

The EMS will not work without a conductive medium (i.e.: gel pads) between your skin and the NARL™ pads. The AbTronic™NARL™ will not work through clothing. To guarantee best results in the fastest time, use ONLY original AbTronic gel pads.

Do not use the unit with gels or Creams that contain oils! Oil based gels can contain ingredients that damage the pads and may reduce the life span of your unit significantly.


GETTING STARTED

Charge the unit until the battery icon is solid indicating the unit is fully charged.

Attach the NARL™pads to the control unit while observing the black and white colour indication.

Attach the gel pads and place the NARL™ pads on the chosen position.

CONTROL UNIT

Auto FunctionsA self-timer switches the unit off after 20 seconds of no operation.If the unit is paused it will switch off after 1min 20 secs of pause.The LCD display will switch off to save power after 20 seconds.


Press and hold the on/off button for 2 seconds to switch the unit on or off

Press the start/pause button to start or pause the selected modeRemark: Default mode after the unit is switched on is mode 2

Press the M button followed by any of the 4 mode buttons (1,2,A,B) to change the mode

Decrease / increase EMS output level during EMS operation from level 0-9.

Selects NARL ultrasound modeSelects NARL ultrasound plus EMS stimulation mode

Selects EMS stimulation mode only.

Push HI button 9 x to increase intensity 9 steps

Push LOW button 9 x to decrease intensity 9 steps

0 <> 1 <> 2 <> 3 <> 4 <> 5 <> 6 <> 7 <> 8 <> 9

&


CLIP

You can attach the clip at the top or the bottom side of the controller’s back.

Simple press the arrow marking on the clips down towards the center of the clip and pull the clip away from the controller before re-attaching it on the other side.


MODES

Select Modes by pressing the mode button M during operation followed by the mode selection buttons 1,2,A & B.

Mode 110 minutes of NARL ultrasound stimulationRemark: During NARL ultrasound stimulation the unit will slightly vibrate to indicate ultrasound output.

Mode 2This is default mode after the unit is switched on.10 minutes of concurrent NARL ultrasound and EMS stimulation.We recommend this mode because it has BOTH ultrasound and EMS.Remark: To change the default mode after switching the unit on, press the M button followed by the mode button.

Mode A30 minutes of EMS stimulation with pattern A – long deep muscle contractions. This mode is suitable for really tone and firm the muscle.


Mode B30 minutes of EMS stimulation with pattern B – short fast muscle contractions. This mode is suitable for normal routine training of muscle.

Remarks:Ultrasound is a high frequency sound which cannot be heard by the human ear. You will not feel, see or hear the ultrasound while it is in operation. To help indicate the NARL™ ultrasound operation the control unit will slightly vibrate during ultrasound output. Further the Ultrasound wave icon in the display will blink during NARL™ ultrasound output.

You can pause the unit during operation by pressing the start pause button. The unit will pause for up to 1 min 20 secs before switching off. Press the button again to continue the operation.

The autotimer will switch the unit off after each mode is completed after 10 or 30 minutes respectively.

Mode 2 is the default mode, it will produce NARL™ ultrasound and EMS output for 10 minutes at the same time.


What to do if you do not feel the stimulation

The NARL™ultrasound stimulation occurs outside the audible spectrum for the human ear – the stimulation cannot be seen, felt or heard.

To help indicate the NARL™ ultrasound operation the control unit will slightly vibrate during ultrasound output. Further the Ultrasound wave icon in the display will blink during NARL™ ultrasound output.

Should no stimulation or contraction during the EMS operation be felt, move the belt slowly around the area until you find the trigger points for the targeted muscle group. Please turn the unit off before moving it to a new position.

The AbTronic™NARL™ is a great way to target problem areas and exercise your muscles. It may take a few moments of practice for locating it correctly and applying the ideal pressure that provides the best results for you.


Important Notes

If there is no gel pad on the ABTRONIC™NARL™, or if it is not placed tightly against the skin, an uncomfortable tingling sensation can occur. This can also happen if the body has built up excessive oils on the skin. Before each use please ensure that the contact points are thoroughly clean and the gel pad is not worn or dirty. A discoloration of the conductive area is normal. Do not wash or immerse the product in water or use fabric cleanser. If there is redness or irritation on applied area after removal of the ABTRONIC™NARL™ from your skin, this could be caused by the gel pad been worn our already.

For safety, and to avoid unnecessary discomfort, please ensure that the intensity settings are set to zero before placing and removing the machine.

Hint: VERY IMPORTANT: You MUST apply a gel pad to ABTRONIC™NARL™ that is not worn or dirty. The ABTRONIC™NARL™ must make contact with your skin. It will not work through clothing.


TAKING CARE OF YOUR UNIT

The ABTRONIC™NARL™ is made of quality materials. The only maintenance required with the ABTRONIC™NARL™ is to clean the conductive area gently, while you are replacing the gel pads, with a wet cloth and soapy water. Do NOT immerse it in water or other liquids. Do not rub hard on the conductive areas. Do not wash it in the washing machine or apply fabric conditioner. NEVER BEND the conductive pads! A discoloration of the conductive area and a “crumbled look” after many uses however is normal. Wear and tear is not covered by the guarantee. If the output becomes weak or the unit switches off automatically in less than 10 minutes, it is time to re-charge the batteries (even if the LED is still lit up).

The electronic control unit is built very reliable and uses SMT technology. It is maintenance free and will give you many, years of trouble free usage.


� Do not wash the unit in the washing machine or chemical cleaners as this can damage the unit

� Do not dry clean � Do not use bleach � Clean the unit with a slightly wet sponge with detergent

and wipe with a cloth.

CARE AND CLEANING

IMPORTANT – PLEASE READ

If the gel pads are worn out, or dirty, an uncomfortable tingling sensation can occur. This can also happen if the body has built up excessive oil on the skin.

DO NOT bend the conductive areas.

Worn or dirty conductive gel pads can reduce the performance of the unit or cause the belt to feel erratic. The conductive gel pads are a consumable item and do wear out eventually. Wear and tear is not covered by the guarantee.


FREQUENTLY ASKED QUESTIONS

Q. How does the ABTRONIC™NARL™ really work?A. ABTRONIC™NARL™ The patended NARL technology and the EMS stimulation are designed to copy messages sent from your brain to the body. This triggers natural processes to help produce visible results.Q. Can muscles become over-developed or strained?A. No - the principle is the same for general training of muscles- the more exercise, with suitable periods of rest, the stronger the muscles become.Q. Can this machine be used for all ages?A. Yes - absolutely. ABTRONIC™NARL™ is not age dependent and can be used at any age. However, the very elderly and children should use it under supervision and, keep the intensity low.Q. Will I find it uncomfortable?A. As long as the gel pads are not worn or dirty and are kept firmly against the skin you will not feel any unpleasantness. At low intensity you will feel a slight tingling sensation but as the intensity gets higher you will only feel the pleasant contraction. Start using it correct position on your body between the rib and hipbone.Q. Should the intensity settings be the same for each muscle?A. Each muscle will respond differently, so intensities will accordingly be different. Move the ABTRONIC™NARL™ around to find the right trigger point that gives you maximum contraction.


Q. Are there any contra-indications to use of the machine?A. Yes - If exercise is inadvisable due to ill health, then a medical practitioner should be consulted before using this or any other device. Read all contra-indications on the last page carefully!Q. When should I notice any effect?A. Depending on the frequency of use and body fat, you should notice improvements between 2-4 weeks of use.Q. I am getting a prickling sensation but no contraction.A. Move the ABTRONIC™NARL™ slightly to find the right trigger points that give maximum contractions and the most pleasant feeling. Try increasing the intensity. This could also be caused because either the gel pad worn or dirty, or is not tightly placed against the skin. Q. I noticed a redness of the skin after the exercise. Is this a problem?A. A slight redness of the skin after a session with the ABTRONIC™NARL™ is normal. It should fade quickly. Some pressure to the skin may also cause it. You should not be concerned about this. If the redness is excessive, that means the gel pads are worn or dirty. Replace the gel pads with the new ones. Q. Maximum how long can I use the device per day? Can I use it everyday?A. You can use maximum 40 mins which is 1 complete cycle for each muscle position per day. And you can use it everyday as routine training.


CONTRAINDICATIONS

� ABTRONIC™NARL™ should NOT be used by people, with cardiac pacemaker, defibrillator or other implanted electronic or metallic devices.

� ABTRONIC™NARL™ should NOT be used by pregnant women, and during first 6 weeks after their baby’s birth.

� ABTRONIC™NARL™ should NOT be used by people with undiagnosed pain syndromes and hemorrhagic diseases.

� ABTRONIC™NARL™ should NOT be used on injured or otherwise impaired muscles

� ABTRONIC™NARL™ should NOT be used on the heart area.

WARNINGS

1. The long-term of chronic electrical stimulation are unknown.

2. Apply electrodes ONLY to normal, intact, clean skin.

3. DO NOT APPLY STIMULATION: � Over the carotid sinus nerves. � Over the neck or mouth. Severe spasms of the

laryngeal and pharyngeal muscles may occur with contractions strong enough to close the airway and/or cause difficulty in breathing. Stimulation over the neck can also have an adverse effect on the heart rhythm or blood pressure.


� Transcerebrally (through the head) � Over swollen, infected or inflamed areas of skin

eruptions (e.g., phlebitis, thrombophlebitis, varicose veins, etc.)

� Transthoracically; introduction of electrical current into the heart may cause rhythm disturbances, which could be fatal.

� Over or in proximity to, cancerous lesions. � If you are epileptic � After experiencing acute trauma or fracture � Following recent surgery � If you have a hernia (abdominal or lingual) � To the frontal, laryngeal and temporal regions of

the neck.

4. Never use the ABTRONIC™NARL™ while driving, operating machinery or during activities in which involuntary muscle contractions may endanger the user or others.

5. Do not use the ABTRONIC™NARL™ in the bath or shower

6. Persons with suspected heart problems or epilepsy should obtain appropriate medical advice.

7. The ABTRONIC™NARL™ should never be used while sleeping

8. Do not immerse the ABTRONIC™NARL™ unit or belt in any liquid.

9. The ABTRONIC™NARL™ must be kept out of reach of children.


PRECAUTIONS: DO NOT USE WHEN:

1. DO NOT use if there is tendency to Hemorrhage (acute trauma or fracture).

2. DO NOT use following any recent surgical procedure when muscle contraction may disrupt the healing process.

3. DO NOT use over the menstruating uterus.

4. DO NOT use if you have skin areas that lack normal sensation

PRECAUTIONS:

1. The safety of neuromuscular stimulation during pregnancy has not been established.

2. Place electrodes in accordance with illustrations in the User Manual.

3. Users should start all sessions in a sitting or prone position (minimum for the first 5 minutes)

4. This unit should not be used while driving, operating machinery or during any activity in which involuntary muscle contractions may place the user at undue risk of injury.

ADVERSE EFFECTSSkin irritation and burns beneath the electrodes has been reported with the use of electrical muscle stimulation.

Recommended AgeThe ABTRONIC™NARL™ is not suitable to use for infants or toddlers, it is suitable to use at any other age, however, the very elderly and children should use it under supervision and, keep the intensity low.


TROUBLE SHOOTING GUIDE

PROBLEM POSSIBLE CAUSE SOLUTION

LCDs do not light up at all

� Batteries are not charged

� Batteries are empty

� Charge batteries � Charge batteries

LCDs light up, but nothing happens

� No skin contact

� Control unit not connected to the pad correctly, or no pads connected

� Use gel pad on conductive pads and place it directly onto skin.

� Check that control unit is connected firmly with ABTRONIC™ NARL™ pad.

� Check the NARL™ pads are connected with the right polarity observing the black and white markings. Further check each pair of black and white marked pads are located close to each other.

� Increase intensity by pushing the up button

� When no NARL™ pad is connected the LCD will fast blink when is pressed and not function.

� Connect at least one pad for NARL function and one pair black and white pads for EMS function to work!


LEDs light up, but nothing occurs

� Intensity set to low level

� Worn or dirty gel pads.

� ABTRONIC™ NARL™ is positioned Incorrectly

� gel pads are worn or have oil deposits.

� Battery is low

� Increase intensity by pushing the up button

� Make sure the gel pads are still adhesive

� Otherwise use new gel pads.

� Move the ABTRONIC™ NARL™ around to locate your trigger points. (switch off when moving)

� Replace gel pads.

� Charge Battery

LEDs light up, but all buttons do not work

� Microprocessor hang up

� Battery is low

� Press and hold the on/off button to switch the unit off and on again.

� Change Battery

IMPORTANT: POWER RESETIf the unit does not switch on, or if you can’t change to different programs, the microprocessor may have “hanged”. Please perform a simple RESET by switching the unit off and on again.


SPECIFICATIONSPECIFICATION

Channel: Single Channel Program Modes 4 Program Modes

EMSIntensity Control: Adjustable 0-28uA, Max output 28uA peak to

peak into 10k ohm load each channel.Wave Form Asymmetrical Bi-Phase Square PulseOut Voltage Adjustable 0-168V, Max output 168V peak to

peak into 10k ohm load each channel.Frequency 9-64 HzPulse Width 27.3-117.1µs

Contraction Time Adjustable, due to different modes.Relaxation Time Adjustable, due to different modes.Ramp Time Adjustable, due to different modes.Timer Default time is 10 or 30 minutesMax. Charge per pulse

7-35 mA.

NARLOutput frequency 517 KHz +/- 5% (NARL ultrasound)Power Supply Li-Polymer battery / 650mAh capacityBattery Life Approximately 4 hours at nominal settings

For one chargeRated current 120mARated voltage 5V (DC IN 5V)Power consumption 19 W (max)Rated voltage 5V (DC IN 5V)Environment for operating and storage:

Temperature: 10° C ~40° C (50° ~140° F), Humidity rate: ≤ 85%, Pressure: Normal atmospheric pressure.

This product is brought to you by:

AbTronic by Red Lemon Incorporation

www.abtronic.co

www.red-lemon.net

© by Red Lemon Incorporation MMXV

NARLV2.4

Documents

ABTRONIC™NARL™ USER MANUAL PAGE 1 · ABTRONIC™NARL™ USER MANUAL PAGE 13 ABTRONIC™NARL™ PLACEMENT: ABTRONIC™NARL™ is designed to achieve maximum results. Follow the