Abstract · Web view- Sony/Philips Digital Interconnect Format SMPTE - Society of Motion Picture and Television Source - AV equipment connected to the inputs of the AV switcher or

Product Engineering Specification

Version 2.8

Atlona Product Engineering Specification1

Table of Contents1 ABSTRACT......................................................................................................................................................................... 3

2 DISCLAIMER...................................................................................................................................................................... 3

2.1 MANUFACTURE.......................................................................................................................................................................32.2 INSTALLATION, TESTING, AND SYSTEM’S ACCEPTANCE......................................................................................................................3

3 SPECIFICATIONS SUMMARY............................................................................................................................................... 3

3.1 HDVS-200-TX / PSK PRODUCT SPECIFIER..................................................................................................................................43.2 HDVS-200-TX-WP PRODUCT SPECIFIER....................................................................................................................................63.3 HDVS-200-RX PRODUCT SPECIFIER...........................................................................................................................................83.4 HDVS-150-TX PRODUCT SPECIFIER...........................................................................................................................................93.5 HDVS-150-TX-WP PRODUCT SPECIFIER..................................................................................................................................103.6 HDVS-150-RX PRODUCT SPECIFIER.........................................................................................................................................113.7 AT-HDVS-210H-TX-WP PRODUCT SPECIFIER..........................................................................................................................123.8 AT-HDVS-210U-TX-WP PRODUCT SPECIFIER..........................................................................................................................133.9 UHD-EX-100CE-RX-PSE PRODUCT SPECIFIER..........................................................................................................................143.10 UHD-EX-100CE-TX-PD PRODUCT SPECIFIER............................................................................................................................153.11 AT-HDVS-300-KIT PRODUCT SPECIFIER...................................................................................................................................163.12 AT-UHD-SW-5000ED PRODUCT SPECIFIER.............................................................................................................................173.13 AT-UHD-SW-52ED PRODUCT SPECIFIER.................................................................................................................................183.14 AT-HD-SC-500 PRODUCT SPECIFIER........................................................................................................................................193.15 AT-UHD-CLSO-601 PRODUCT SPECIFIER.................................................................................................................................203.16 AT-UHD-CLSO-612ED........................................................................................................................................................213.17 AT-UHD-CLSO-824............................................................................................................................................................223.18 AT-UHD-CLSO-840............................................................................................................................................................233.19 AT-OPUS-810M-PRODUCT SPECIFIER.....................................................................................................................................243.20 AT-OPUS-68M-PRODUCT SPECIFIER.......................................................................................................................................253.21 AT-OPUS-46M-PRODUCT SPECIFIER.......................................................................................................................................263.22 AT-OPUS-RX-PRODUCT SPECIFIER..........................................................................................................................................273.23 AT-VGW-250-PRODUCT SPECIFIER.........................................................................................................................................283.24 AT-VTP-800-BL/WH-PRODUCT SPECIFIER...............................................................................................................................293.25 AT-VTP-550-BL/WH-PRODUCT SPECIFIER...............................................................................................................................293.26 AT-VCC-RS232-KIT-PRODUCT SPECIFIER.................................................................................................................................303.27 AT-VCC-IR-KIT-PRODUCT SPECIFIER........................................................................................................................................303.28 AT-VCC-RELAY-KIT-PRODUCT SPECIFIER.................................................................................................................................303.29 OMNISTREAM™ VC-2 (AT-OMNI-111, AT-OMNI-112, AT-OMNI-121, AT-OMNI-122, AT-OMNI-512, AT-OMNI-521) PRODUCT SPECIFIER313.29.2 VIDEO ENCODER AND DECODER SPECIFICATION......................................................................................................................313.29.3 AUDIO SUB SYSTEM SPECIFICATIONS.....................................................................................................................................323.29.3.5 EMBEDDED AUDIO SUPPORT...............................................................................................................................................323.29.3.6 AES67 SUPPORT..............................................................................................................................................................32SHALL SUPPORT AES67 STANDARD FOR AUDIO OVER IP............................................................................................................................323.29.4 SYSTEM...........................................................................................................................................................................323.29.5 HARDWARE......................................................................................................................................................................343.29.6 ENVIRONMENTAL..............................................................................................................................................................353.30 AT-UHD-SW-510W / EU....................................................................................................................................................36

4 DEFINITIONS AND ABBREVIATIONS.................................................................................................................................. 38


1 AbstractThe objective of this document is to serve as an engineering source or Specifier for Altona’s products, to help the designer in their project specification. The document is provided as a convenience to our customers and will require editing and customization to meet the project scope and requirements.

2 Disclaimer Atlona Technologies shall not be liable for any damages arising out of using this guide. To insure accuracy of your design, please contact our design and support team at (800)-536-3976.

2.1 ManufactureBasis of design subject to compliance with requirements to provide products of Atlona Technologies head quartered at 70 Daggett Drive, San Jose CA 95134. U.S. Office: +1.877.536.3976, or international +1.408.962.0515

2.2 Installation, testing, and system’s acceptanceProduct installation, testing, customer training, and system acceptance shall be done by an Atlona Certified Partner/ Engineer.

3 Specifications summaryThe AV system and devices shall meet the following as minimum for product operation:

1. The UHD/4K, and HD Digital Transport System shall operate as a standalone point-to-point system, as well as a part of a larger switching system for delivering local AV content to far end sinks

2. Audio/Video switching and distribution at native resolution without compression3. HDMI signal transport4. Audio signal transport5. CEC support6. RS232 support7. HDCP 1.4 or greater support8. Deep Color support9. EDID pass through and or EDID management10. Display control support11. Auto signal detection12. Field Firmware upgradable13. Backed up with 10 years limited product warranty14. Specification


3.1 HDVS-200-TX / PSK Product SpecifierThe 3X1 switcher / transmitter shall have two HDMI and one VGA inputs, as well as audio on 3.5 mm mini-stereo connector. The transport shall extend HDMI, VGA (including audio), RGBHV, YUV, and Composite, as well as RS-232 and Ethernet over HDBaseT port. The switching shall have input select, as well as display and volume control buttons on the front panel. Device configuration, operation, and maintenance shall be available via software management and Web GUI access. When two or more signal inputs are available, the transmitter shall include integrated switcher with signal sensing. The switcher shall switch to the last detected input (when not used with a control system by the same manufacturer). The 4K /UHD Input Switcher shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10-year manufacturer limited warranty

1. 3X1 HDBaseT Switcher - two HDMI inputs plus a VGA input with 3.5mm audio connector2. Front panel input select button3. Front panel display on/off control4. Front panel volume control5. Front LED indication for PWR, Input source selected, and signal status6. Video resolution support for 4096×2160@24/25/30/50*/60Hz, 3840×2160@24/25/30/50/60Hz,

2048x1080p, [email protected]/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i

7. VESA resolution support for 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480

8. YUV and RGB Color Space9. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling10. 8-bit, 10-bit, 12-bit Color Depth11. Automatic display control: Selects active input when sources are connected12. Automatic input selection using video detection technology13. EDID management support14. CEC support 15. HDCP 1.4 support16. PCM 2CH input audio17. PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS® 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-

HD Master Audio™ for HDMI IN and HDBaseT OUT18. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz19. Up to 24-bit rate20. TCP/IP and RS-232 control of switcher21. Ethernet enabled, HDBaseT extension22. Transmits IP and AV signals up to 328 ft. (100m)23. CAT5e/6 @ 4K up to 70 meters24. CAT5e/6 @ 1080p up to 100 meters25. CAT6a/7 @ 4K up to 100 meters26. HDMI IN/OUT @ 4K up to 5 meters27. HDMI IN/OUT @ 1080p up to 10 meters28. Signal bandwidth of 10.2 Gbps29. Web GUI setup, management and support 30. Compatible with IP-Management System software


31. Firmware upgradable via mini USB 32. CE and FCC certified


3.2 HDVS-200-TX-WP Product SpecifierThe 2X1 switcher/ transmitter shall be able to extend HDMI, VGA (including audio), RGBHV, YUV, and Composite over HDBaseT port. The 2X1 switcher / transmitter shall have input select, as well as display and volume control buttons on the front panel. Device configuration, operation, and maintenance shall be available via software management and Web GUI access. When two signal inputs are available, the transmitter shall include integrated switcher with signal sensing. The switcher shall switch to the last detected input (when not used with a control system by the same manufacturer). The 4K /UHD Input Switcher shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10-year manufacturer limited warranty.

1. US, 2-gang Decora-style wall plate 2. 2X1 HDBaseT Switcher - One HDMI input plus a VGA input with 3.5mm audio connector3. Front panel input select button4. Front panel display on/off control5. Front panel volume control6. Front LED indication for PWR and signal status7. Video resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz,



9. YUV and RGB Color Space10. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling11. 8-bit, 10-bit, 12-bit Color Depth12. Automatic display control: Selects active input when sources are connected13. Automatic input selection using video detection technology14. EDID management support15. CEC support 16. HDCP 1.4 support17. PCM 2CH input audio18. PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS® 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD

Master Audio™ for HDMI IN and HDBaseT OUT19. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz20. Up to 24-bit rate21. TCP/IP and RS-232 control of switcher22. Ethernet enabled, HDBaseT extension23. Transmits IP and AV signals up to 328 ft. (100m)24. CAT5e/6 @ 4K up to 70 meters25. CAT5e/6 @ 1080p up to 100 meters26. CAT6a/7 @ 4K up to 100 meters27. HDMI IN/OUT @ 4K up to 5 meters28. HDMI IN/OUT @ 1080p up to 10 meters29. Signal bandwidth of 10.2 Gbps30. Web GUI setup, management and support 31. Compatible with IP-Management System software


32. Firmware upgradable via mini USB 33. Power consumption up 30W34. CE and FCC certified


3.3 HDVS-200-RX Product SpecifierThe HD Scaling receiver shall accept HDBaseT audio and video Signal, and outputs HDMI, as well as de-embedded balanced audio output. It shall have two RS-232 ports, and contact closure port for screen or display lift control. The scaler receiver shall have automatic display control via CEC or control system, as well as menu and volume adjustment via software management, web GUI, or front panel button control. The HD scaling receiver shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10-year manufacturer limited warranty.

1. HD video scaler with HDMI output and input resolution control2. Automatic display control - Automatically changes projector power state based on active or standby

mode of scaler. Control signals transmitted via IP, RS-232, or CEC3. Front Panel Control for Menu, Auto, and Volume 4. Front LED indication for PWR and signal status5. Video resolution support for [email protected]/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz,

720p@50/59.94/60Hz, 576p, 576i, 480p, 480i6. VESA resolution support for 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050,

1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×4807. Dual TCP/IP and RS-232 control 8. Ethernet enabled, HDBaseT extension9. Contact closure for screen control or display lift control10. Auto Display Control11. Power over Ethernet for associated TX12. YUV and RGB Color Space13. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling14. 8-bit, 10-bit, 12-bit Color Depth15. CEC support 16. HDCP 1.4 support17. EDID management support18. PCM 2Ch, de-embedding analog audio out19. PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS® 5.1, Dolby Digital Plus™, Dolby TrueHD, DTS-HD

Master Audio™ for HDMI OUT and HDBaseT IN 20. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz21. Up to 24-bit rate22. Transmits IP and AV signals up to 328 ft. (100m)23. CAT5e/6 @ 1080p up to 100 meters24. HDMI IN/OUT @ 1080p up to 10 meters25. Signal bandwidth of 10.2 Gbps26. Web GUI setup, management and support 27. Compatible with IP-Management System software28. Firmware upgradable via mini USB 29. 48V Input Power 30. CE and FCC certified


3.4 HDVS-150-TX Product SpecifierThe 3X1 switcher / transmitter shall have two HDMI and one VGA inputs, as well as audio on 3.5 connector. The transport shall extend HDMI, VGA (including audio), RGBHV. The switching shall have input select, as well as display control buttons on the front panel. Device configuration, operation, and maintenance shall be available via Web GUI access. When two or more signal inputs are available, the transmitter shall include integrated switcher with signal sensing. The switcher shall switch to the last detected input (when not used with a control system by the same manufacturer). The 4K/UHD Input Switcher shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10-year manufacturer limited warranty

1. 4K/UHD capability @ 60 Hz with 4:2:0 Chroma subsampling2. Full support of 4K/UHD streaming services and playback device3. Video resolution support for 4096×2160@24/25/30/50/60Hz*, 3840×2160@24/25/30/50/60Hz,



5. YUV and RGB Color Space6. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling7. 8-bit, 10-bit, 12-bit Color Depth8. Signal bandwidth of 10.2 Gbps9. CEC Pass through10. HDCP 1.4 compliant - Adheres to latest specification for High-bandwidth Digital Content Protection11. PCM 2CH input audio12. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz13. Up to 24-bit rate14. CAT5e/6 @ 4K up to 35 meters15. CAT5e/6 @ 1080p up to 60 meters16. CAT6a/7 @ 4K up to 40 meters17. HDMI IN/OUT @ 4K up to 5 meters18. HDMI IN/OUT @ 1080p up to 10 meters19. Signal bandwidth of 10.2 Gbps20. Web GUI setup, management and support 21. Firmware upgradable via mini USB 22. CE and FCC certified


3.5 HDVS-150-TX-WP Product SpecifierThe 2X1 switcher/ transmitter shall be able to extend HDMI, VGA (including audio), RGBHV, YUV, and Composite over HDBaseT port. The 2X1 switcher / transmitter shall have input select, as well as display control on the front panel. Device configuration, operation, and maintenance shall be available via software management and Web GUI access. When two signal inputs are available, the transmitter shall include integrated switcher with signal sensing. The switcher shall switch to the last detected input (when not used with a control system by the same manufacturer). The 4K /UHD Input Switcher shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10 years manufacture limited warranty.

1. US, 2-gang Decora-style wall plate 2. 2X1 HDBaseT Switcher - One HDMI input plus a VGA input with 3.5mm audio connector3. Front panel input select button4. Front panel display on/off control5. Front LED indication for PWR and signal status6. Video resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz,



8. YUV and RGB Color Space9. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling10. 8-bit, 10-bit, 12-bit Color Depth11. Automatic display control: Selects active input when sources are connected12. Automatic input selection using video detection technology13. CEC support 14. HDCP 1.4 support15. PCM 2CH input audio16. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz17. Up to 24-bit rate18. Transmits AV signals up to 230 ft. (70m)19. CAT5e/6 @ 4K up to 35 meters20. CAT5e/6 @ 1080p up to 60 meters21. CAT6a/7 @ 4K up to 40 meters22. HDMI IN/OUT @ 4K up to 5 meters23. HDMI IN/OUT @ 1080p up to 10 meters24. Signal bandwidth of 10.2 Gbps25. Web GUI setup, management and support 26. Compatible with IP-Management System software27. Firmware upgradable via mini USB 28. Power consumption up 18.7W (when paired)29. CE and FCC certified


3.6 HDVS-150-RX Product SpecifierThe HD Scaling receiver shall accept HDBaseT audio and video Signal, and outputs HDMI, as well as de-embedded balanced audio output, and RS-232 port. The HD scaling receiver shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10 years manufacture limited warranty.

1. HD video scaler with HDMI output and input resolution control2. Front Panel Control for Menu setup 3. Front LED indication for PWR and signal status4. Video resolution support for [email protected]/24/25/29.97/30/50/59.94/60Hz,

1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i5. VESA resolution support for 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900,

1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480

6. Power over Ethernet for associated TX7. YUV and RGB Color Space8. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling9. 8-bit, 10-bit, 12-bit Color Depth10. CEC support 11. HDCP 1.4 support12. PCM 2Ch, de-embedding analog audio out13. Master Audio for HDMI OUT and HDBaseT IN 14. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz15. Up to 24-bit rate16. Transmits IP and AV signals up to 328 ft. (100m)17. CAT5e/6 @ 1080p up to 70 meters18. HDMI IN/OUT @ 1080p up to 10 meters19. Signal bandwidth of 10.2 Gbps20. Web GUI setup, management and support 21. Compatible with IP-Management System software22. Firmware upgradable via mini USB 23. 48 Input Power 24. CE and FCC certified


3.7 AT-HDVS-210H-TX-WP Product SpecifierThe 2X1 switcher/transmitter shall be able to extend 2 HDMI inputs over HDBaseT port. Device configuration, operation, and maintenance, shall be available via software management and Web GUI access. When two signal inputs are available, the transmitter shall include integrated switcher with signal sensing. The switcher shall switch to the last detected input (when not used with a control system by the same manufacturer). The 4K /UHD Input Switcher shall be an advanced signal extender system incorporating the following device specifications, and backed up with 10 years manufacture limited warranty. 1. US one-gang enclosure for Decora®-style wallplate openings

2. 2×1 HDBaseT™ switcher with HDMI® inputs3 HDBaseT transmitter for AV, power, and control up to 330 feet (100 meters)4. 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling 1. Remotely powered via PoE (Power over Ethernet)2. Automatic input selection and automatic display control3. TCP/IP and RS-232 control4. UHD /HD/ SD resolutions 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*,


5. VESA resolutions - 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900,1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600,640×480

6. YUV and RGB Color Space7. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling8. 8-bit, 10-bit, 12-bit Color Depth9. CEC support 10. HDCP 2.2 support11. PCM 2Ch, de-embedding analog audio out12. Master Audio for HDMI OUT and HDBaseT IN 13. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz14. Up to 24-bit rate15. Transmits IP and AV signals up to 328 ft. (100m)16. CAT5e/6 @ 4K up to 70 meters17. CAT5e/6 @ 1080p up to 100 meters18. HDMI IN/OUT @ 4K up to 5 meters19. HDMI IN/OUT @ 1080p up to 10 meters20. Signal bandwidth of 10.2 Gbps21. Web GUI setup, management and support 22. Compatible with IP-Management System software23. Firmware upgradable via IP or mini USB 24. CE, FCC certified


3.8 AT-HDVS-210U-TX-WP Product SpecifierThe 2X1 switcher/ transmitter shall be able to extend 2 HDMI inputs over HDBaseT port. Device configuration, operation and, maintenance shall be available via software management and Web GUI access. When two signal inputs are available, the transmitter shall include integrated switcher with signal sensing. The switcher shall switch to the last detected input (when not used with a control system by the same manufacturer). The 4K/UHD Input Switcher shall be an advanced signal extender system incorporating the following device specifications, and backed up with a 10-year manufacturer limited warranty. 1. US one-gang enclosure for Decora®-style wallplate openings

2. 2×1 HDBaseT™ switcher with HDMI and USB-C inputs3 HDBaseT transmitter for AV, power, and control up to 330 feet (100 meters)4. 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling5. Remotely powered via PoE (Power over Ethernet)6. Automatic input selection and automatic display control7. TCP/IP and RS-232 control8. UHD /HD/ SD resolutions 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*,


9. VESA resolutions - 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900,1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600,640×480

10. YUV and RGB Color Space11. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling12. 8-bit, 10-bit, 12-bit Color Depth13. CEC support 14. HDCP 2.2 support15. PCM 2Ch, de-embedding analog audio out16. Master Audio for HDMI OUT and HDBaseT IN 17. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz18. Up to 24-bit rate19. Transmits IP and AV signals up to 328 ft. (100m)20. CAT5e/6 @ 4K up to 70 meters21. CAT5e/6 @ 1080p up to 100 meters22. HDMI IN/OUT @ 4K up to 5 meters23. HDMI IN/OUT @ 1080p up to 10 meters24. Signal bandwidth of 10.2 Gbps25. Web GUI setup, management and support 26. Compatible with IP-Management System software27. Firmware upgradable via IP or mini USB 28. CE, FCC certified


3.9 UHD-EX-100CE-RX-PSE Product SpecifierThe 4K /UHD Transport System shall be an advanced signal extender system incorporating the following device specifications, and backed up with a 10-year manufacturer limited warranty.

1. 4K/UHD capability @ 60 Hz with 4:2:0 Chroma subsampling2. Full support of 4K/UHD streaming services and playback device3. Video resolution support for 4096×2160@24/25/30/50/60Hz*, 3840×2160@24/25/30/50/60Hz,



5. YUV and RGB Color Space6. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling7. 8-bit, 10-bit, 12-bit Color Depth8. Signal bandwidth of 10.2 Gbps9. CEC Pass through10. HDCP 2.2 compliant - Adheres to latest specification for High-bandwidth Digital Content

Protection11. PoE power source – remotely powers a PoE-compatible transmitter – Adheres to IEEE 802.3af

PoE Power Sourcing Equipment (PSE)12. AV, Ethernet, power, and control over HDBaseT - Receives 4K/UHD video, embedded audio,

100Base-T Ethernet, power, and control through a single cable13. Extended distance HDMI extension - Receives HDMI signals up to 330 feet (100 meters) @ 1080p

with CAT5e/6 or 4K/UHD using CAT6a/7 cable14. Extends RS-232, CEC, and Ethernet control signals15. Audio format support for PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS® 5.1, Dolby Digital

Plus™, Dolby TrueHD, DTS-HD Master Audio™, Dolby Atmos®, DTS:X®16. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz17. Up to 24-bit rate18. CAT5e/6 @ 4K up to 70 meters up to 230 feet19. CAT6a/7 @ 4K up to 100 meters up to 328 feet20. CAT5e/6 @ 1080p up to 100 meters up to 328 feet21. HDMI IN/OUT @ 4K up to 5 meters up to 15 feet22. HDMI IN/OUT @ 1080p up to 10 meters up to 30 feet23. Field-updatable firmware via Front panel USB port24. Front panel Power and Link status LEDs25. 1 inch (25 mm) high quarter rack-width enclosure26. Power supply certified for CE, FCC, RoHS, cULus, RCM,CCC


3.10 UHD-EX-100CE-TX-PD Product SpecifierThe 4K /UHD Transport System shall be an advanced signal extender system incorporating the following device specifications, and backed up with a 10-year manufacturer limited warranty.

1. 4K/UHD capability @ 60 Hz with 4:2:0 Chroma subsampling2. Remotely powered via PoE3. Video resolution support for 4096×2160@24/25/30/50/60Hz*, 3840×2160@24/25/30/50/60Hz,



5. YUV and RGB Color Space6. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling7. 8-bit, 10-bit, 12-bit Color Depth8. Signal bandwidth of 10.2 Gbps9. CEC Pass through10. HDCP 2.2 compliant - Adheres to latest specification for High-bandwidth Digital Content Protection11. PoE power source – remotely powers a PoE-compatible transmitter – Adheres to IEEE 802.3af PoE

Power Sourcing Equipment (PSE)12. AV, Ethernet, power, and control over HDBaseT - Receives 4K/UHD video, embedded audio,

100Base-T Ethernet, power, and control through a single cable13. Extended distance HDMI extension - Receives HDMI signals up to 330 feet (100 meters) @ 1080p

with CAT5e/6 or 4K/UHD using CAT6a/7 cable14. Extends RS-232, CEC, and Ethernet control signals15. Multi-channel audio compliant - Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD,

Dolby Atmos®, DTS® Digital Surround™, DTS-HD Master Audio™, and DTS:X®16. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz17. Up to 24-bit rate18. CAT5e/6 @ 4K up to 70 meters up to 230 feet19. CAT6a/7 @ 4K up to 100 meters up to 328 feet20. CAT5e/6 @ 1080p up to 100 meters up to 328 feet21. HDMI IN/OUT @ 4K up to 5 meters up to 15 feet22. HDMI IN/OUT @ 1080p up to 10 meters up to 30 feet23. Field-updatable firmware via Front panel USB port24. Front panel Power and Link status LEDs25. 1 inch (25 mm) high quarter rack-width enclosure26. Power supply certified for CE, FCC, RoHS, cULus, RCM, CC


3.11 AT-HDVS-300-KIT Product SpecifierThe Soft Codec Conferencing System shall have ability to provide AV switching, USB and HDMI extension, plus system control using PC-based codecs such as Skype, WebEx, and Go ToMeeting. The system shall have a transmitter and a receiver with five video inputs shared between both devices for HDMI, DisplayPort, and analog video signals. The transmitter and receiver will have three USB type B connectors for host computers, in addition to two USB hubs on each of the transmitter and receiver. The system must be able to support 4k/UHD sources and displays. The following device specifications shall be backed up with a 10-year manufacturer limited warranty.

1. Video resolution support for 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, [email protected]/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i


3. YUV and RGB Color Space4. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling5. 8-bit, 10-bit, 12-bit Color Depth6. Automatic display control: Selects active input when sources are connected7. Automatic input selection using video detection technology8. EDID management support9. CEC support 10. HDCP 1.4 support11. PCM 2CH input audio12. Audio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby

Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X 13. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz14. Up to 24-bit rate15. TCP/IP and RS-232 control of switcher16. Ethernet enabled, HDBaseT extension17. Transmits IP and AV signals up to 328 ft. (100m)18. CAT5e/6 @ 4K up to 70 meters19. CAT5e/6 @ 1080p up to 100 meters20. CAT6a/7 @ 4K up to 100 meters21. HDMI IN/OUT @ 4K up to 5 meters22. HDMI IN/OUT @ 1080p up to 10 meters23. Signal bandwidth of 10.2 Gbps24. Web GUI setup, management and support 25. Compatible with IP-Management System software26. Firmware upgradable via mini USB 27. Power consumption up 24W28. CE and FCC certified29. Power supply certified for CE, FCC, RoHS, cULus, RCM, CCC


3.12 AT-UHD-SW-5000ED Product SpecifierThe 5X1 4K/UHD switcher shall have two HDBaseT inputs, three HDMI inputs, mirrored HDMI and HDBaseT outputs, balanced audio outputs, automatic input selection, and automatic display control capability. It shall transmit AV signals along with Ethernet, power, and control over a single cable to displays up to 330 feet (100 meters). For long term protection investment, the followings product and specification shall support a 10- year manufacture limited warranty.



3. YUV and RGB Color Space4. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling5. 8-bit, 10-bit, 12-bit Color Depth6. Automatic display control using Consumer Electronics Control (CEC)*, IP and RS-2327. Automatic input selection using video detection technology8. EDID management support9. CEC support 10. HDCP Switchable- Compliant / non-compliant - 1.4 support11. PCM 2CH input audio12. Audio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS® 5.1, Dolby

Digital Plus™, Dolby TrueHD, DTS-HD Master Audio™, Dolby Atmos®, DTS:X® 13. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz14. Up to 24-bit rate15. TCP/IP and RS-232 control of switcher16. Ethernet enabled, HDBaseT extension17. Transmits IP and AV signals up to 330 ft. (100m)18. CAT5e/6 @ 4K up to 70 meters19. CAT5e/6 @ 1080p up to 100 meters20. CAT6a/7 @ 4K up to 100 meters21. HDMI IN/OUT @ 4K up to 5 meters22. HDMI IN/OUT @ 1080p up to 10 meters23. Signal bandwidth of 10.2 Gbps24. Web GUI setup, management and support 25. Compatible with IP-Management System software26. Firmware upgradable via mini USB 27. Power consumption up 24W28. CE and FCC certified29. Power supply certified for CE, FCC, Level VI, RoHS, cULus, RCM, CCC


3.13 AT-UHD-SW-52ED Product SpecifierThe 5X1 4K/UHD switcher shall have five HDMI inputs, with mirrored HDBaseT and HDMI outputs, balanced analog audio outputs, automatic input selection, and automatic display control capability. It shall transmit AV signals along with Ethernet, power, and control over a single cable to displays up to 330 feet (100 meters). For long term protection investment, the followings product and specification shall support a 10-year manufacturer limited warranty.



3. YUV and RGB Color Space4. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling5. 8-bit, 10-bit, 12-bit Color Depth6. Automatic display control using Consumer Electronics Control (CEC)*, IP and RS-2327. Automatic input selection using video detection technology8. EDID management support9. CEC support 10. HDCP Switchable- Compliant / non-compliant - 1.4 support11. PCM 2CH input audio12. Audio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS® 5.1, Dolby

Digital Plus™, Dolby TrueHD, DTS-HD Master Audio™, Dolby Atmos®, DTS:X®13. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz14. Up to 24-bit rate15. TCP/IP and RS-232 control of switcher16. Ethernet enabled, HDBaseT extension17. Transmits IP and AV signals up to 330 ft. (100m)18. CAT5e/6 @ 4K up to 70 meters19. CAT5e/6 @ 1080p up to 100 meters20. CAT6a/7 @ 4K up to 100 meters21. HDMI IN/OUT @ 4K up to 5 meters22. HDMI IN/OUT @ 1080p up to 10 meters23. Signal bandwidth of 10.2 Gbps24. Web GUI setup, management and support 25. Compatible with IP- Management System software26. Firmware upgradable via mini USB 27. Power consumption up 22W28. CE and FCC certified29. Power supply certified for CE, FCC, cULus, RCM


3.14 AT-HD-SC-500 Product SpecifierThe 3x1 switcher scaler will have two HDMI inputs, VGA, as well as analog audio inputs for embedding onto HDMI output. The switcher scaler shall have Automatic display control using CEC, IP and RS-232, as well as Automatic input selection using video detection technology. The switcher scaler Shall be controlled via TCP.IP, RS-232. It will have ability to adjust volume control, input selection, and turning display power ON /OFF from the front panel. For long term protection investment, the followings product and specification shall support a 10- year manufacture limited warranty.

1. Video resolution support for up to 1920 x 1200 including [email protected]/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800, 1280×768, 1152×864, 1024×768, 800×600, 640×480

2. YUV and RGB Color Space3. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling4. 8-bit, 10-bit, 12-bit Color Depth5. Automatic display control using Consumer Electronics Control (CEC)*, IP and RS-2326. Automatic input selection using video detection technology7. EDID management support8. HDCP Switchable- Compliant / non-compliant - 1.4 support9. PCM 2CH input audio10. Audio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby

Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X 11. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz12. Up to 24-bit rate13. TCP/IP and RS-232 control of switcher14. HDMI IN/OUT @ 1080p up to 10 meters / 30 feet15. Signal bandwidth of 6.75 Gbps16. Web GUI setup, management and support


3.15 AT-UHD-CLSO-601 Product SpecifierThe UHD/ 4K multi-format switcher shall have four HDMI inputs, two multi-function analog inputs, and a mirrored HDMI, and HDBaseT output with a built-in 4K scaler. It will have Automatic display control using CEC, IP and RS-232, as well as Automatic input selection using video detection technology. The switcher Shall be controlled via TCP.IP, RS-232. For long term protection investment, the followings product and specification shall support a 10- year manufacture limited warranty.



3. Composite / S-Video formats NTSC, NTSC4, PAL, PAL-M, PAL-N, SECAM4. Automatic display control using Consumer Electronics Control (CEC)*, IP and RS-2325. Automatic input selection using video detection technology6. EDID management support7. HDCP Switchable- Compliant / non-compliant - 1.4 support8. PCM 2CH input audio9. TCP/IP and RS-232 control of switcher10. Ethernet enabled, HDBaseT extension11. CAT5e/6 @ 4K up to 70 meters12. CAT5e/6 @ 1080p up to 100 meters13. CAT6a/7 @ 4K up to 100 meters14. HDMI IN/OUT @ 4K up to 5 meters15. HDMI IN/OUT @ 1080p up to 10 meters16. Signal bandwidth of 10.2 Gbps17. Web GUI setup, management and support


3.16 AT-UHD-CLSO-612EDThe UHD/ 4K multi-format switcher shall have 2HDMI inputs, two HDBaseT inputs, two multi-function analog inputs, a mirrored HDMI, and HDBaseT output with a built-in 4K scaler. It will have Automatic display control using CEC, IP and RS-232, as well as Automatic input selection using video detection technology. The switcher Shall be controlled via TCP.IP, RS-232. For long term protection investment, the followings product and specification shall support a 10- year manufacture limited warranty.



3. YUV, RGB Color Space4. 4:4:4, 4:2:2 Chroma Subsampling5. 8-bit, 10-bit, 12-bit Color Depth6. Automatic display control using Consumer Electronics Control (CEC)*, IP and RS-2327. Automatic input selection using video detection technology8. EDID management support9. HDCP Switchable- Compliant / non-compliant - 1.4 support10. PCM 2CH input audio11. Audio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS® 5.1, Dolby

Digital Plus™, Dolby TrueHD, DTS-HD Master Audio™, Dolby Atmos®, DTS:X® 12. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz13. Up to 24-bit rate14. TCP/IP and RS-232 control of switcher15. Ethernet enabled, HDBaseT extension16. CAT5e/6 @ 4K up to 70 meters17. CAT5e/6 @ 1080p up to 100 meters18. CAT6a/7 @ 4K up to 100 meters19. HDMI IN/OUT @ 4K up to 5 meters20. HDMI IN/OUT @ 1080p up to 10 meters21. Signal bandwidth of 10.2 Gbps22. Web GUI setup, management and support


3.17 AT-UHD-CLSO-824The UHD/ 4K multi-format switcher shall have four HDMI inputs, three HDBaseT inputs, one multi-function analog inputs, two HDBaseT outputs as well as two HDMI mirrored outputs. It will have an audio output mixer, as well as Ethernet and RS-232 and IR HDBaseT insertion. The switcher shall be controlled via TCP/IP, RS-232. For long term protection investment, the followings product and specification shall support a 10-year manufacturer limited warranty.



3. YUV, RGB Color Space4. 4:4:4, 4:2:2 Chroma Subsampling5. 8-bit, 10-bit, 12-bit Color Depth6. EDID management support7. HDCP Switchable- Compliant / non-compliant - 1.4 support8. PCM 2CH input audio9. Audio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS® 5.1, Dolby

Digital Plus™, Dolby TrueHD, DTS-HD Master Audio™, Dolby Atmos®, DTS:X® 10. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz11. Up to 24-bit rate12. TCP/IP and RS-232 control of switcher13. Ethernet enabled, HDBaseT extension14. CAT5e/6 @ 4K up to 70 meters15. CAT5e/6 @ 1080p up to 100 meters16. CAT6a/7 @ 4K up to 100 meters17. HDMI IN/OUT @ 4K up to 5 meters18. HDMI IN/OUT @ 1080p up to 10 meters19. Signal bandwidth of 10.2 Gbps20. Web GUI setup, management and support


3.18 AT-UHD-CLSO-840The UHD/ 4K multi-format switcher shall have five HDMI inputs, three HDBaseT inputs, two HDBaseT outputs, as well as two discrete HDMI outputs. It will have an audio output switcher, as well as audio embedding and de-embedding. The switcher shall be controlled via TCP.IP, RS-232. For long term protection investment, the followings product and specification shall support a 10- year manufacture limited warranty.



3. YUV, RGB Color Space4. 4:4:4, 4:2:2 Chroma Subsampling5. 8-bit, 10-bit, 12-bit Color Depth6. EDID management support7. HDCP 1.4 compliant8. PCM 2CH input audio9. Audio for HDMI IN and HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1,

Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X 10. Audio sample rates of 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz11. Up to 24-bit rate12. TCP/IP and RS-232 control of switcher13. Ethernet enabled, HDBaseT extension14. CAT5e/6 @ 4K up to 70 meters15. CAT5e/6 @ 1080p up to 100 meters16. CAT6a/7 @ 4K up to 100 meters17. HDMI IN/OUT @ 4K up to 5 meters18. HDMI IN/OUT @ 1080p up to 10 meters19. Signal bandwidth of 10.2 Gbps20. Web GUI setup, management and support


3.19 AT-OPUS-810M-Product SpecifierThe 8x10 4K/UHD/HDR HDBaseT matrix switcher shall have eight HDMI inputs, with 8 HDBaseT and 2 HDMI matrix outputs. It will have 2 unbalanced analog audio inputs, 4 Toslink inputs, and return audio from any television output onto any of the 10 unbalanced analog audio outputs. The Matrix shall be controlled via TCP/IP, RS-232. For long term protection investment, the followings product and specification shall support a 10-year manufacturer limited warranty.

1. Video resolutions supported 4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, [email protected]/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz,720p@50/59.94/60Hz, 576p, 576i, 480p, 480i

2. VESA resolutions supported 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×8001280×768, 1152×768, 1024×768, 800×600

3. YUV, RGB Color spaces supported4. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling5. 8-bit, 10-bit, 12-bit Color Depth6. EDID management support7. HDR support HDR10 @ 60Hz and Dolby® Vision™ @ 30Hz8. Shall support HDCP up to 2.2 9. Shall Supports HDMI 2.010. Analog audio output/input support PCM 2CH 11. Shall support Toslink output/input support PCM 2Ch, Dolby® Digital, DTS® 5.112. HDMI IN/OUT HDBaseT out audio support of PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS® 5.1,

Dolby Digital Plus™, Dolby TrueHD, DTS-HD Master Audio™, Dolby Atmos®, DTS:X®13. Audio sample rates supported 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz14. Audio bit rate supported 24-bit (max.)15. Ability to trigger CEC on/off commands to connected displays (displays that support full CEC

functions)16. Shall support fully matrixable analog audio outputs from any HDMI, analog audio, Toslink, or return

audio input17. IR passthrough from control system into matrix and then to displays and from displays back to matrix

and then to sources18. TCP/IP and RS-232 control of switcher19. Ethernet enabled, HDBaseT extension20. CAT5e/6 @ 4K up to 70 meters21. CAT5e/6 @ 1080p up to 100 meters22. CAT6a/7 @ 4K up to 100 meters23. HDMI IN/OUT @ 4K up to 5 meters24. HDMI IN/OUT @ 1080p up to 10 meters25. Signal bandwidth of 18 Gbps26. Web GUI setup, management and support27. Firmware upgradable via ethernet connection


3.20 AT-OPUS-68M-Product SpecifierThe 6x8 4K/UHD/HDR HDBaseT matrix switcher shall have six HDMI inputs, with 6 HDBaseT and 2 HDMI matrix outputs. It will have 2 unbalanced analog audio inputs, 3 Toslink inputs, and return audio from any television output onto any of the 8 unbalanced analog audio outputs. The Matrix shall be controlled via TCP/IP, RS-232. For long term protection investment, the followings product and specification shall support a 10-year manufacturer limited warranty.









3.21 AT-OPUS-46M-Product SpecifierThe 6x8 4K/UHD/HDR HDBaseT matrix switcher shall have four HDMI inputs, with 4 HDBaseT and 2 HDMI matrix outputs. It will have 2 unbalanced analog audio inputs, 2 Toslink inputs, and return audio from any television output onto any of the 6 unbalanced analog audio outputs. The Matrix shall be controlled via TCP/IP, RS-232. For long term protection investment, the followings product and specification shall support a 10-year manufacturer limited warranty.









3.22 AT-OPUS-RX-Product SpecifierThe 4K /UHD/HDR Transport System shall be an advanced signal receiver used in conjunction with any OPUS matrix system, incorporating the following device specifications and backed up with a 10-year manufacturer limited warranty.



3. YUV, RGB Color spaces supported4. 4:4:4, 4:2:2, 4:2:0 Chroma Subsampling5. 8-bit, 10-bit, 12-bit Color Depth6. EDID passthrough support7. HDR support HDR10 @ 60Hz and Dolby® Vision™ @ 30Hz8. HDCP up to 2.2 supported9. Supports HDMI 2.010. AV, Ethernet, power, and control over HDBaseT - Receives 4K/UHD video, embedded audio,

100Base-T Ethernet, power, and control through a single cable11. Toslink input support PCM 2Ch, Dolby® Digital, DTS® 5.112. HDMI output audio support of PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS® 5.1, Dolby Digital

Plus™, Dolby TrueHD, DTS-HD Master Audio™, Dolby Atmos®, DTS:X®13. Audio sample rates supported 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz14. Audio bit rate supported 24-bit (max.)15. IR passthrough from control system into matrix and then to display via the RX and from RX back to

matrix and then to source16. Ethernet enabled, HDBaseT extension17. Remotely powered via PoE18. PoE powered device – remotely powered via PoE-compatible transmitter – Adheres to IEEE 802.3af

PoE Powered Device (PD)19. Front panel Power and Link status LEDs20. CEC Pass through21. CAT5e/6 @ 4K up to 70 meters HDBaseT input22. CAT5e/6 @ 1080p up to 100 meters HDBaseT input23. CAT6a/7 @ 4K up to 100 meters HDBaseT input24. HDMI OUT @ 4K up to 5 meters HDBaseT input25. HDMI OUT @ 1080p up to 10 meters26. Signal bandwidth of 18 Gbps27. Firmware upgradable via HDBaseT connection to Matrix


3.23 AT-VGW-250-Product SpecifierThe Velocity Control Gateway shall be the AV control processor for the Velocity Control System. It shall serve and control 250 IP devices either Atlona and third-party AV devices, dedicated Velocity touchpads, and BYOD control interfaces. It shall have dual Ethernet ports for isolating a dedicated AV LAN from the facility or corporate network. It will be setup and managed via any web browser for any OS platform. It shall support redundancy when two gateways are configured to work in such a fashion.

1. Uses Two Network Interface Controllers (NIC)2. Supports the following network standards and protocols DHCP, HTTP, HTTPS, SFTP, SMTP, SNMP,

SSH, TCP, UDP, IEEE 802.1x3. Supports Ethernet speeds of 10/100/1000 Mbps4. Shall support the following Network addressing DHCP and static5. HDMI out to support splash screen with IP and firmware information6. Firmware updateable via web-Gui, drag and drop functionality7. Supports role-based features and management8. Uses LS 1.2, ECDHE_RSA with P-256, AES_128_GCM, HTTPS security.9. Ability to manage and control the gateway via cloud access with the appropriate license


3.24 AT-VTP-800-BL/WH-Product SpecifierThe VTP-800, Velocity 8-inch touch panel shall act as a control interface for the Velocity Control System. It shall work in conjunction with the VGW-250 to control either Atlona or other third-party AV devices. It shall operate as a PoE PD devices and requires no external power supply.

1. The panel is a Capacitive touch, 8” LCD, 1280 x 8002. Color depth of the panel 8 bits per channel / 16.7 million colors3. Shall support Elecro-optical Ambient light sensor4. Uses Advance “time-of-flight” sensor as the proximity sensor5. PoE powered device – remotely powered via PoE-compatible transmitter – Adheres to IEEE 802.3af

PoE Powered Device (PD)6. Touch screen uses capacitive glass surface that supports multi-touch and gesture interactions7. Can be installed in to a standard US 2 gang backbox8. Has a microphone using Digital MEMS (MicroElectro-Mechanical Systems) for future functionality

3.25 AT-VTP-550-BL/WH-Product SpecifierThe VTP-550, Velocity 5.5-inch touch panel shall act as a control interface for the Velocity Control System. It shall work in conjunction with the VGW-250 to control either Atlona or other third-party AV devices. It shall operate as a PoE PD devices and requires no external power supply.

1. The panel is a Capacitive touch, 5.5” LCD, 720x12802. Color depth of the panel 8 bits per channel / 16.7 million colors3. Shall support Elecro-optical Ambient light sensor4. Uses Advance “time-of-flight” sensor as the proximity sensor5. PoE powered device – remotely powered via PoE-compatible transmitter – Adheres to IEEE

802.3af PoE Powered Device (PD)6. Touch screen uses capacitive glass surface that supports multi-touch and gesture interactions7. Can be installed in to a standard US or Euro 1 gang backbox8. Has a microphone using Digital MEMS (MicroElectro-Mechanical Systems) for future functionality


3.26 AT-VCC-RS232-KIT-Product SpecifierThe VCC-RS232 shall act as a TCP to RS-232 command convertor for the Velocity Control System. In conjunction with the VGW-250 control processor, the VCC-RS232 will receive IP commands and convert them to the proper RS-232 commands for the connected devices. The VCC shall operate as a PoE PD device and does not require an external power supply. The VCC can be configured in software as a straight through configuration or null modem.

1. Network connectivity via RJ-45, 100/10 Mbps Ethernet Protocol2. Unit comes 5-foot (1.5 meter) RS-232 adapter cable3. Unit comes with DB9 male-male gender changer4. PoE powered device – remotely powered via PoE-compatible transmitter – Adheres to IEEE 802.3af

PoE Powered Device (PD)5. RS-232 Full support for Tx, Rx, CTS, RTS, DTR, and DTS signals using bidirectional communication with

hardware handshaking

3.27 AT-VCC-IR-KIT-Product SpecifierThe VCC-IR shall act as a TCP to infrared (IR) command convertor for the Velocity Control System. In conjunction with the VGW-250 control processor, the VCC-IR will receive IP commands and convert them to the proper IR commands for up to three connected devices. The VCC-IR shall operate as a PoE PD device and does not require an external power supply. The VCC-IR-KIT shall come with a TriPort connector that will allow up to 3 IR emitters (not included) to be connect to 3 different IR devices.

1. Network connectivity via RJ-45, 100/10 Mbps Ethernet Protocol2. Unit comes 1ft TriPort IR cable3. IR output uses 3.5 mm (supports IR emitter, IR blaster, Xantech compatible)4. PoE powered device – remotely powered via PoE-compatible transmitter – Adheres to IEEE 802.3af

PoE Powered Device (PD)5. Supports IR learning in conjunction with the VGW-250

3.28 AT-VCC-RELAY-KIT-Product SpecifierThe VCC-RELAY shall act as a TCP to relay trigger or sensor for the Velocity Control System. The VCC-RELAY can be composed of up to 4 independent SPST relays, 2 SPDT relays or 1 DPDT relay. The VCC-RELAY shall also have 4 sensor inputs that can be configured to voltage or contact sensors. The VCC-RELAY shall operate as a PoE PD device and does not require an external power supply.

1. 4 Terminal connection relays for SPST configuration. 2 Terminal connection relays for SPDT configuration. 1 Terminal connection relay for DPDT configuration.

2. 4 sensor ports that can be can figured as contact closure sensors or voltage sensors3. 4.5-foot (1.4 meter) cable4. PoE powered device – remotely powered via PoE-compatible transmitter – Adheres to IEEE 802.3af

PoE Powered Device (PD)5. Voltage: AC/DC voltages ± 3 V to ± 24 V (RMS) supported for the voltage sensor6. 4 x SPST with transient voltage suppression 24 V AC/DC or 0.5 A NO contact


3.29 OmniStream™ VC-2 (AT-OMNI-111, AT-OMNI-112, AT-OMNI-121, AT-OMNI-122, AT-OMNI-512, AT-OMNI-521) Product Specifier

The AVoIP system shall enable the high density (up to two channels per box) of UHDp60 video at a latency of less than 0.5 video frames (1.5 in Fast Switching Mode) while being powered over either PoE or external power.

AV over IP system shall support FEC (forward error correction) up to 20 x 20 matrix size

the AVoIP system shall support both physical and logical redundancy. For improve video distribution flexibility and management AV over IP system should support

encoders grouping. Grouping encoders allows a group of encoders to feed a single decoder, simultaneously. The stream displayed by the decoder using either manual or automatic input-selection, based on the presence of a source signal.

For copy protected content, the AVoIP system shall support content encryption using AES128 encryption.

For long term protection investment, the system shall support a 10-year manufacturer limited warranty.

3.29.2 Video Encoder and Decoder Specification3.29.2.1 Video inputs/Outputs Interfaces

- Dual HDMI per box (AT-OMNI-112, AT-OMNI-512 and AT-OMNI-122)- Single HDMI per box (AT-OMNI-111, AT-OMNI-121, AT-OMNI-521)

3.29.2.2 Scaling & output resolutions- Decoder shall support video scaling from 800x600 to 3840x2160 at frame rates up to 60 frames-per-

second3.29.2.3 Input resolution detection

- Automatic input resolution detection3.29.2.3.1 Encoding/Decoding formats

- VC-2 SMPTE 20423.29.2.3.2 Density

- Up to two video services per box (AT-OMNI-112, AT-OMNI-512 and AT-OMNI-122)- Single video service per box (AT-OMNI-111, AT-ONMI-121 and AT-OMNI-521)

3.29.2.4 VC-2 specification3.29.2.4.1 Rate control

- CBR (Constant Bit Rate) 3.29.2.4.2 Bit Rate

- 15 Mbps to 900 Mbps3.29.2.4.3 Bit depth

- 8 bits, 10 bits, 12 bits3.29.2.4.4 Chroma sub-sampling

- 4:2:0, 4:2:2, 4:4:43.29.2.4.5 Latency

- End to end latency of 0.5 frames or less and 1.5 frames latency in Fast Switching Mode3.29.2.5 HDR Support

Shall support HDR10, HLG and DolbyVision™ up to 60 frames-per-seconds


3.29.2.6 Video Wall Support- Shall support video wall size up to 16 x 16 screens up to 4Kp30- Shall support video wall size up to 2 x 2 screens for 4Kp60- Shall support landscape and portrait mode for display orientation (90⁰,180⁰,270⁰ rotation)- Shall support precision timing for wall tiles synchronization- Shall support four ways basel compensation- Shall support non-symmetrical basel- Shall support adjustment in pixels and mm

3.29.2.7 Fast Switching Support- Shall support of fast content switching, regardless of incoming resolution and framerate.*

NOTE: *Output can be fixed to 1080p60 or 1080p30 depending on number of decoder channels3.29.3 Audio Sub System Specifications3.29.3.1 Audio input/output

- HDMI audio input- Ability to output balanced analog audio on the decoder- Ability to re-embed balanced analog audio input on the decoder- Ability to decode audio from a source different from video

3.29.3.2 Pass through and re-embedding3.29.3.2.1 Audio formats

- LPCM 2.0, 5.1, 7.1- DTS® 5.1, DTS-HD Master Audio™- Dolby Digital AC3 2.0, 5.1- Dolby Digital Plus™ E-AC3 2.0, 5.1, 7.1- Dolby TrueHD 2.0, 5.1, 7.1- Dolby Atmos

3.29.3.2.2 Audio density- Dual 2.0 balanced analog audio outputs (AT-OMNI-122)- Single 2.0 balanced analog audio output (AT-OMNI-121)

3.29.3.3 Audio down mix- Downmix of incoming LPCM to 2.0

3.29.3.4 Audio volume control- Volume control via management system- Audio mute

3.29.3.5 Embedded Audio Support- Shall have support for embedded audio over IP

3.29.3.6 AES67 SupportShall support AES67 standard for audio over IP

3.29.4 System3.29.4.1 Decoder redundancy modes

- Decoder supports redundancy of incoming streams- Support of only sending IGMP join requests when a redundancy switch occurs- Support being always joined to both primary and backup multicast streams

3.29.4.1.1 Redundancy Events- Physical link redundancy (primary and backup streams on different physical interfaces)- Logical link redundancy (primary and backup streams may be on the same physical interface)


3.29.4.2 Streaming mode- Video, audio, and RS232 are streamed on separate multicasts

3.29.4.3 IP protocols3.29.4.3.1 IP address assignment

- IP v4- DHCP, static, or automatic IP configuration

3.29.4.3.2 Host name- Ability to configure device host name

3.29.4.3.3 Discovery- Support of mDNS/DNS-SD

3.29.4.3.4 IGMP- IGMP v2 and IGMP v3 (SSM)- IGMP Immediate leave

3.29.4.3.5 Streaming and multicasting- RTP output (encoder) and RTP input (decoder)

3.29.4.3.6 SAP/SDP- SAP/SDP including session name, description, and originator

3.29.4.3.7 Packet loss protection- FEC (forward error correction) per SMPTE 2022-5:2013- FEC matrix sizes from 1x4 to 20x20

3.29.4.3.8 QoS- QoS tagging

3.29.4.4 RS232 protocol3.29.4.4.1 RS232 settings

- Baud rates from 2400-115200- Configurable parity, stop bit, and flow control- 6 pin RS232 connector (3 pins used per service)

3.29.4.4.2 Projector/display control- Display on/off via RS232 using customizable commands

3.29.4.4.3 RS232 over IP- RS232 encapsulation into IP for transmission between encoder and decoder- Ability to receive RS232 from a source different from video- Ability to perform bidirectional RS232 communication when configured as unicast

3.29.4.5 Display control3.29.4.5.1 Aspect ratio

- Support for the following aspect ratios: full screen, 16:9, 16:10, 4:3, same as source3.29.4.5.2 Test pattern

- Test pattern generation automatically (due to loss of input) or manually3.29.4.5.3 Input HDMI switching

- Switch between HDMI inputs using front panel buttons3.29.4.5.5 Video output matrix

- Ability to route any input to any output3.29.4.5.6 EDID

- EDID copy of connected displays- EDID internal source


- Export EDID information via RS232 and management system- External EDID insertion via management system- Independent EDID per output

3.29.4.5.7 HDCP- HDCP 2.2- HDCP modes: compliant, non-compliant, and automatic- Automatic scrambling of the IP stream for HDCP sources

3.29.4.5.8 CEC- CEC per HDMI 1. 4b- CEC commands: monitor on/off, input select, volume up/down

3.29.4.5.9 Display mode- Ability to automatically turn on connected display when source signal is detected- Ability to automatically turn off connected display when source signal is removed

3.29.4.6 Scrambling- AES 128 encryption of video and audio- Scrambling key is controlled by management system

3.29.4.8 Firmware upgrade3.29.4.8.1 Field upgradability

- Remote upgrade of firmware via management system3.29.4.8.2 Safe upgrade

- If firmware upgrade fails, the system shall revert to previous firmware3.29.4.9 Configuration Import / Export

- Export of unit configuration- Import of unit configuration- Storage of up to 5-unit configuration files with user defined names

3.29.4.10 Data reporting- The unit shall support configuration and display of description and location

3.29.4.11 Unit location string- User defined location string may be up to 100 text characters

3.29.4.12 Power up/Reset- Power up time is less than 20 seconds

3.29.4.13 Alarms and warnings- The system shall support forwarding of alarms and warning messages to the management system

3.29.5 Hardware3.29.5.1 Interfaces3.29.5.1.1 HDMI

- Dual HDMI per box (AT-OMNI-112, AT-OMNI-512 and AT-OMNI-122)- Single HDMI per box (AT-OMNI-111, AT-OMNI-121 and AT-OMNI-521)- HDMI 2.0b

3.29.5.1.2 Network- Dual RJ45 per box (AT-OMNI-112, AT-OMNI-512 and AT-OMNI-122)- Single RJ45 per box (AT-OMNI-111, AT-OMNI-121 and AT-OMNI-521)

3.29.5.1.3 Audio- Dual 2.0 balanced input/output per box (AT-OMNI-112 and AT-OMNI-122)- Single 2.0 balanced input/output per box (AT-OMNI-111 and AT-OMNI-121)- Volume control (gain) – 0 dB to 15 dB


- Audio mute3.29.5.2 Serial communication

- 6 pin RS232 connector (3 pins used per service)3.29.5.3 Front panel buttons3.29.5.3.1 Display on/off

- Display on/off front panel buttons for controlling connected display(s)3.29.5.3.2 Input selection

- Input select front panel buttons for controlling connected display(s)3.29.5.3.3 Volume up/down

- Volume up/down front panel buttons for controlling connected display(s)3.29.5.3.4 Reset

- Unit reset button recessed on front panel3.29.5.3.5 ID

- ID front panel button to indicate unit in management system3.29.5.3.6 Push button control

- Management system can disable front panel buttons3.29.5.4 LED

- HDMI status LEDs- Network status LEDs- Power status LED- Management system can blink LEDs to locate unit

3.29.5.5 Power supply- Power may be connected via either external PSU or PoE- Unit can automatically switch between external PSU and PoE depending on what is connected

3.29.5.5.1 PoE- <13W power consumption (no analog audio), so unit may be powered with one PoE- Ability to dynamically switch which RJ45 PoE is sourced from in case of input failures

3.29.5.5.2 External PSU- External PSU two pin captive screw phoenix connector

3.29.5.5.3 MTBF- Unit MTBF of 90,000 hours

3.29.5.5.4 Compliance- FCC part 15 subpart B, ICES-003, Issue 2, Class A- EN 60950-1 safety specification- EN 55022 and CISPR22- EN 55024- RoHS

3.29.5.6 Dimensions- H x W x D: 34 x 208 x 112 (mm)

3.29.6 Environmental3.29.6.1 Temperature

- 0°C - 50°C degrees Celsius external ambient operating temperature- -40°C to 70°C degrees’ Celsius external ambient storage (non-operational) temperature

3.29.6.2 Humidity- 90% relative humidity, non-condensing


3.29.6.3 ESD- ±12kV (air) and ±8kV (contact)


3.30 AT-UHD-SW-510W / EU1. The 5x1 switcher shall have Two HDMI, one DisplayPort, and one USB-C input, plus an input for

wireless AV2. Mirrored HDBaseTTM and HDMI outputs3. Wireless AV gateway for iOS®, Android™, Mac®, Chromebook™, and Windows devices 4K/UHD

capability @ 60 Hz with 4:2:0 chroma subsampling, plus support for 4K/60 4:4:4 and HDR formats on local ports (HDMI, USB-C, and DisplayPort), HDCP 2.2 compliant

4. Automatic input selection and automatic display control 5. USB-C port supports device charging for laptops, tablets, and smartphones6. It will have an audio output switcher, as well as audio embedding and de-embedding 7. The switcher shall be controlled via TCP/IP, RS-232.8. For long term protection investment, the followings product and specification shall support a 10-

year manufacture limited warranty.9. Supported video resolutions: 4096×2160@60/30/25/24Hz*, 3840×2160@60/30/25/24Hz*,

1080p@60/59.9/50/30/29.97/25/24/23.98Hz, 1080i@60/59.94/50Hz, 720p@60/59.94/50Hz, 576p@50Hz, 576i@50Hz, 480p@60/59.96Hz, 480i@60Hz, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1440×900, 1400×1050, 1280×1024, 1280×800, 1366×768, 1360×768, 1152×864, 1024×768, 800×600, 640×480

10. Color space - YUV, RGB11. Chroma Subsampling - 4:4:4, 4:2:2, 4:2:012. HDR † - HDR10 and Dolby® Vision™ @ 60Hz13. USB-C Up to 4K/UHD @ 60Hz for devices supporting USB-C Alternate Mode video output14. Wireless: Up to 1080p @ 30Hz 4:2:0 (up to 1080p @ 60Hz with Miracast™); dependent on wireless

signal quality15. Audio Pass Through formats: PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®,

DTS® Digital Surround™, DTS-HD Master Audio™, and DTS:X®16. Analog Input - Unbalanced 2-channel, 3.5 mm17. Analog Output - Balanced / unbalanced 2-channel, 5-pin captive screw18. Sample Rate - 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz19. Bit Rate - 24-bit20. Signal bandwidth – 18 Gbps21. CEC Support22. HDCP 2.2 compliant23. USB Ports: USB Type C: USB-C for AV input (Alternate Mode), USB 2.0 Type A for Wi-Fi® antenna

modules (3 ports)24. USB-C Power - Up to 60 W / 3 A at 20 V25. USB-C Device Charging Capability - Up to 20 V, 3 A Output: 60 W @ 20 V, 36 W @ 12 V, 15 W @ 5 V26. Ethernet Port: 1x RJ4527. Protocols - DHCP, HTTP, HTTPS, SFTP, SMTP, SNMP, Telnet, SSH, TCP/IP, UDP28. Ethernet speed - 10/100/1000 Mbps


29. Addressing - DHCP, static30. Wi-Fi - EEE 802.11n/ac 2.5 GHz / 5 GHz31. Wi-Fi Protocols - WEP, WPA, PSK, WPA2 PSK, WPA Enterprise, WPA2 Enterprise32. Wifi dongles – 2x Antennas provided33. RS-232 – 1x Bidirectional, 3-pin captive screw34. Relay - 3-pin captive screw, normally open (NO), with adjustable Toggle and Pulse modes with

Electrical rating: 48 V @ 1 A35. Trigger - 4-pin captive screw, Electrical rating: 30 V @ 1 A (max.)36. Temperature Operating - 32 to 122 Fahrenheit, 0 to 50 Celsius37. Humidity (RH) - 20% to 90%, non-condensing38. Power consumption at full load – 121 W39. Idle power consumption – 35- 40 W40. Power Supply - Input: 100 – 240 V AC, 50/60 Hz, Output: 5 V DC 41. Device weight – 3.70 LBS, 1.68 Kilograms42. Device Certification - CE, FCC, UL


4 Definitions and Abbreviations1. 100BaseT -An Ethernet standard for transmitting at 100 Mbps over twisted pair cable2. 1000Base-T / Gigabit Ethernet - An Ethernet standard that transmits at 1 Gbps over twisted pair cable3. 4K - Digital cinema resolution at 4092x2160 pixels. Frame rates can range from 24 to 120 fps. 4K is often

mentioned along with Ultra HD, which has a video resolution of 3840x21604. 720p - Progressive-scan HDTV transmission standard. Refers to an active pixel rate of 1280x720 with a vertical

refresh rate of 60 frames per second for NTSC countries or 50 frames per second for PAL/SECAM countries5. AES/EBU - Audio Engineering Society/European Broadcasting Union6. Aspect ratio - The relationship of the horizontal dimension to the vertical dimension of an Image.7. Balanced – 3-conductor, 110-ohm cabling with an XLR connector, typically referred to as “AES/EBU audio.”8. CAT 5 - Category 5 - Describes the network cabling standard that consists of four unshielded twisted pairs of

copper wire terminated by RJ-45 connectors. CAT 5 cabling supports data rates up to 100 Mbps and a minimum bandwidth of 100 MHz CAT 5 is based on the EIA/TIA 568 Commercial Building Telecommunications Wiring Standard.

9. CAT 5e - Enhanced Category 5- The standard for the next higher grade of unshielded 10. twisted pair - UTP beyond Category 5. The CAT 5e specification was developed to provide more robust

support for 1000Base-T, and includes tighter limits than CAT 5 for NEXT, ELFEXT, and return loss. CAT 5e cabling supports a minimum bandwidth of 100 MHz

11. CAT 6 - Category 6 - The standard for the next higher grade of unshielded twisted pair UTP cabling beyond CAT 5e. The standard defines components (cable and connecting hardware) and cabling (basic link and channel) for Category 6 channels, as well as Level III field tester requirements. CAT 6 cabling supports a minimum bandwidth of 250 MHz

12. CAT 6a - Category 6a, or Augmented Category 6 A higher grade of twisted pair cabling beyond standard CAT 6-rated cable, with twice the bandwidth capability. CAT 6a features a shielded twisted pair cable design, with braid and foil shielding around the unshielded twisted pair conductors. This design improves crosstalk performance at high frequencies. CAT 6a cabling supports a minimum bandwidth of 500 MHz

13. CAT 7 - Category 7 - The cable standard for 10 Gigabit Ethernet using shielded twisted pair - STP cable. CAT 7 features strict guidelines for crosstalk and system noise, requiring shielding for each pair of wires and the cable. CAT 7 cabling supports a minimum bandwidth of 600 MHz

14. CEC - Consumer Electronics Control15. DDC - Display Data Channel16. DHCP - Dynamic Host Configuration Protocol.17. DPCP- DisplayPort Content Protection18. DRM - Digital Rights Management19. EDID - Extended Display Identification Data20. FCC - Federal Communications Commission21. fps - Frames per Second22. HDBaseT- A signal extension technology defined by the HDBaseT Alliance for combining and transporting

HDMI audio/video, Ethernet, control signals, and DC power using category-type twisted pair cable.23. HDCP - High-bandwidth Digital Content Protection24. HDMI - High-Definition Multimedia Interface25. HDTV - High Definition Television26. IP - Internet Protocol27. JPEG - Joint Photographic Experts Group28. LAN - Local Area Network29. MAC - Media Access Control30. Matrix Switcher- A means of selecting an input source and connecting it to one or more outputs. Like a

regular switcher, but with multiple inputs and multiple outputs. 31. MHz - Megahertz


32. Miracast - A protocol developed by the Wi-Fi Alliance for streaming of audio and video media between devices over a Wi-Fi connection

33. Multicast - Multicast addressing is a network technology for the delivery of information to a group of destinations simultaneously using the most efficient strategy to deliver the messages over each link of the network only once, creating copies only when the links to the multiple destinations split. A single stream is sent from the source to a group of recipients

34. PCM - Pulse Code Modulation35. RS-232 - An Electronic Industries Association - EIA serial digital interface standard. specifying the

characteristics of the communication path between two devices using either DB-9 or DB-25 connectors.

36. S/PDIF - Sony/Philips Digital Interconnect Format37. SMPTE - Society of Motion Picture and Television38. Source - AV equipment connected to the inputs of the AV switcher or extender39. STP - Shielded Twisted Pair, CATx cable with internal metallic electromagnetic shielding for individual pairs

and/or the cable overall. 40. TCP/IP - Transmission Control Protocol/Internet Protocol41. TMDS - Transition Minimized Differential Signaling42. TOSLINK - An optical fiber connection standard for digital audio developed by Toshiba43. Unbalanced - 2-conductor, 75-ohm coaxial cable with an RCA connector.44. Ultra HD - Video resolution at 3840x2160 pixels, with frame rates from 24 to 60 fps. Ultra HD is often

mentioned along with 4K.45. USB - Universal Serial Bus46. UTP - Unshielded Twisted Pair, CATx cable without internal metallic electromagnetic shielding47. VESA - Video Electronics Standards Association48. YCbCr - Used to describe the color space for interlaced component video.49. YUV - Defines color space in terms of Y - luminance or brightness, and two color-difference components, U -

red minus luminance and V - blue minus luminance. YUV is interchangeable with “YCbCr” for digital component video and “YPbPr” for analog


Documents

Abstract · Web view- Sony/Philips Digital Interconnect Format SMPTE - Society of Motion Picture and Television Source - AV equipment connected to the inputs of the AV switcher or