About Safetyline JalousieSafetyline Jalousie is now available in AustraliaAfter 20 years involvement in the Australian home improvement and commercial premises building market, with their original Vergola opening roof system, SMR Designs Pty Ltd has been authorised to manufacture and distribute Safetyline Jalousie louvre window systems in Australia and Papua New Guinea.

SMR Designs Pty Ltd, with its Vergola product, provides the premium external louvre roofing system in Australia. The company now has the opportunity to provide louvre window systems with the same commitment to quality, value and superior design. The Safetyline Jalousie product is now being fabricated in plants in Australia and we are members of the Australian Window Association.

Safetyline Jalousie - a European LeaderCreated in France, the Safetyline Jalousie product has been developed and exclusively manufactured and distributed in Europe by Technal, a division of the European giant, Hydro. It is part of over 50 years of European design and production excellence.

Technal is the leading brand for aluminium systems in Europe, offering the most extensive range of windows, doors, facades and unique products such as conservatories, balustrades, partitions, and louvre and hurricane proof windows.

All products are in compliance with the strictest European standards. The Safetyline Jalousie product is also in compliance with Australian Standard AS 2047

Customer AssistanceSMR Designs Pty Ltd, with its Safetyline Jalousie product, offers architect, window company and building partners:

• Complete design and fabrication documentation;• Complete CAD* drawings in DWG & DXF format;• Technical assessments and quotations;• Adaptation of custom designed profiles; and• Installation and maintenance training;* Each CAD drawing in this manual has a JX code which corresponds to the DWG or DXF file contained in the resource disc.

A Revolution in Louvre WindowsSafetyline Jalousie goes beyond all other systems to provide:

• Extra wide louvres, up to 1.4 metres;• Inbuilt security;• Support for air conditioning; and• Internal flyscreening;With aluminium frames and support structures, the louvres may be manufactured from aluminium or from glass, which provides a natural and soft ambience.

Application OpportunitiesThe Safetyline Jalousie product is ideal for both domestic and commercial renovations and installations and suits both contemporary and traditional buildings. As well as having an effective practical and design application for domestic buildings, the product has been very successfully installed in hotels, restaurants, schools and other

publicly accessed buildings around the world.

Product InformationThis remarkable new product from Technal France represents a new dimension in glass louvre windows.Offering identical water penetration qualities to a normal window the JX from Safetyline Jalousie provides all the benefits of a glass louvre window but now with added security.

Innovative design and quality engineering come together to deliver impenetrable security, modern styling and increased functionality. Every JX glass louvre is framed on three sides and hinged at the rear edge of the glass. The hinge can incorporate a stainless steel bar providing impenetrable security and an interlocking feature that guarantees a watertight seal.Sturdy cam driven operating mechanisms ensure a locked position of the glass louvre even in the most extreme weather conditions. Design possibilities are endless with complete floor to ceiling capabilities and a choice of glass or aluminium louvres. A range of operating mechanisms makes any installation possible. Opening up the indoors can now be done with complete peace of mind. The lifestyle and energy saving benefits are considerable and in an era of sustainable design, the JX from Safetyline Jalousie is a clear winner.

Product CharacteristicsThese include:

• Extra wide louvres, up to 1.4m.• Louvre support bars that provide complete security from intruders - even if the glass louvre is broken, the

window remains secure.• Unique seals on all four sides of the louvre frame, providing a complete seal to the installation.• The use of either a lever or handle operator that locks in, up to, 4 different positions for convenience - ensuring

the optimum ventilation in all weather conditions.• Internal flyscreens which snap into the frame and are easily removed for cleaning.• Unique electronic 12/24 volt DC control (optional), for customers preferring electronic operation.• With electronic operation, the system can be linked to a central building control panel.• The opportunity to install sensors that will automatically open or close the louvres. • Motors are mounted on the frame to provide an aesthetically pleasing appearance and easy maintenance.

Frame with glass louvres Frame with aluminium louvres

Frame with combination of louvres

Frame with fly screen

Frame with Glass Louvres

JX004C

JX003C

Frame with Aluminium Louvres

JX006C

JX005A

Frame with Combination of Louvres (Glass and Aluminium Louvres)

JX004C

JX007C

Frame with Fly Screen

JX011C

JX012B

List of profiles

63

19

31

7791

16

71.6

18

63

7709

7792

16.4

5.2

13

63

46

18.6

17

100

77105

15

Top Transom Fly Screen Frame

Stainless SteelSecurity Rod

IntermediateTransom

Bottom Transom

Sub Sill Sub head

Sub Sill

7798

25

28.6

31

15.5

15.5

12.2 1.8

7661

8.2x12.5

Ø 6.6

7662

66.8

64

21.97657

List of profilesSide Jamb

Aluminium Blade

Louvre Bearer

Jamb Connector Jamb Cover

7713

17.4

132

27

14 x 14

17.2

28.5

14 x 14 41

7790

13

42

637793

54.6

6.1

777254.6

12.6

7711

1.2 1.2

Side Jamb

Aluminium Blade

Louvre Bearer

Jamb Connector Jamb Cover

7713

17.4

132

27

14 x 14

17.2

28.5

14 x 14 41

7790

13

42

637793

54.6

6.1

777254.6

12.6

7711

1.2 1.2

63

19

31

7791

16

71.6

18

63

7709

7792

16.4

5.2

13

63

46

18.6

17

100

77105

15

Top Transom Fly Screen Frame

Stainless SteelSecurity Rod

IntermediateTransom

Bottom Transom

Sub Sill Sub head

Sub Sill

7798

25

28.6

31

15.5

15.5

12.2 1.8

7661

8.2x12.5

Ø 6.6

7662

66.8

64

21.97657

8.0

FeaturesFixed Frame• Sections: 63 mm module squarecut assembled by screws and screw sockets (stainless steel screws)• Weatherproofing: by EPDM or polyethylene brush gaskets on upright sections and each horizontal transom.

Water drainage via bottom transom• Fastening: to the building structure by clip-in capping section• Outside sill/architrave: directly by clipping into the grooves in the fixed frame• Accommodates fly screen on front of frame

Frame Finishes• There is a wide selection of frame colours to choose from. The aluminium components are available in three

surface finishes – powder coated, high performance powder coated and anodised.• Selecting the correct finish for your environment and ongoing maintenance are critical to the appearance of

the finish.

Louvres• Sections: curved aluminium or glass louvres fitted with nylon end caps, open to 80°, interval of 135 mm• Weatherproofing: by EPDM gasket on each louvre• Infill system: U-shaped EPDM gasket for glass louvres,• Combination of glass and aluminium louvres are possible

Glass Louvre Selection• Almost any glass can be selected provide the blade width is 123mm and the thickness is 6mm.• In warm climates tinted glass can help to reduce solar heat gain, whereas in colder areas, low e glass helps to

reduce heat loss.• In float and toughened glass we offer standard clear, grey, green and bronze options. Acid etched toughened

(frosted) is also available as a standard option.

Aluminium Louvre Selection• Aluminium louvres have a width of 135mm and can be treated with the same finishes as the aluminium frame.

Operation• Operated by lever handles or knobs for symmetric and simultaneous opening of louvres to 80°• Louvre opening system by rods fitted with pins that directly operate the louvre end caps• Spring-loaded compensator for easy operation of louvres according to dimensions

VariantsInstallation of fixed frame either:• on bottom transom only,• on single inside sill section,• on inside sill section with trim

PerformanceAustralian Standards• Australian Standard AS2047 specifies mandatory /minimum standards for windows

and JX Louvre Windows easily meet these requirements.• All window manufacturers are required to label their windows with their identification, window rating

and water penetration resistance.• JX Louvre Windows have been NATA tested and achieved a Window Rating of N5 (2200Pa)

and a Water Penetration Resistance rating of N5, C3 (400Pa).

Window Energy Rating Scheme (WERS)• The aim of the WERS is to provide a rating to evaluate the relative energy performance of

different types of windows.• Safetyline Jalousie is a member of the Window Energy Rating Scheme.• JX Louvre Windows have been tested and the result are available on request or by visting the WERS website.

Acoustic PerformanceSound proofing of windows can sometimes be overlooked until the noise disturbs you. Whether it’s from traffic, aircraft, trains or even neighbours, unwanted noise can be minimised.

The sound insulation of windows refers to the ability of a closed window to reduce external noise entering your building.

JX Louvre Windows have been designed with acoustic performance in mind and with the right glass selection, sound reduction of up 23.5dB is achievable.

Single octave testing results are shown in the table below.

Loosening of glass louvre bearer

Pull force of more than 200 daN on bearers without loosening of louvres. Test no. Q-0305-01

Sunlight ageing

On end caps and drivers, after 300 hours in compliance with standard NF T51-056, no noticeable change in characteristics. CSTB test no. 01-0020

DESIGNPERFORMANCE

ACCREDITED MEMBER No. AWA 562

2200Structural

Water Resistance400

Pa

This manufacturer certifies that thisproduct was designed to conformwith AS2047. The design perfor-mance has been verified by a NATAaccredited test laboratory. Thismanufacturer is a member of theAWA Accreditation Program.

AWA

AUSTRALIANWINDOWASSOCIATION

Frequency (Hz) 63 125 250 500 1,000 2,000 4,000 8,000

Single Octave Rw 5 11 19 21 28 28 26 24

Warranty• Seven year warranty against defects arising from faulty workmanship or materials from the date of receipt

of goods.• Warranty against defects and degradation for glass supplied with the product, will be as per the warranty

provided by the glass manufacturer.• Three year warranty on moving parts which wear out as a part of normal use.• One year warranty on all electrical components.

Safetyline Jalousie warrants its products provided the following conditions are met:

• The product has not been subject to misuse, physical abuse or neglect;• The product has been maintained according to recommendations;

• The product is installed in accordance with all relevant Australian Standards.

The warranty is limited to the repair or replacement of the faulty product but excludes any installation costs. Claims should be submitted within one month of the fault being detected. This warranty is in addition to all other rights and remedies available under the Trade Practices Act and State or Territory Laws.

Care and MaintenanceGeneral Maintenance • Inspect after installation and then annually.• Check all screws are tight.• Check all seals are clean and in place.• Check all handles for correct operation and note any sign of wear.• Make sure all louvres open and close easily.

ALUMINIUM: Regular maintenance helps to reduce the rate of weathering of aluminium finishes. How often you clean depends on where you live but cleaning every three months could be seen as a guide.

• Warm water and a mild detergent should be used to remove loose deposits and clean louvre frames and aluminium blades.

• Cleaning agents, particularly those with a caustic effect, should not be used.

GLASS: Regular cleaning with a mild detergent and water usually gives the best results.

Comprehensive SpecificationThe following specification is provided for convenience and non applicable items should be deleted. The louvre window shall incorporate the JX Louvre Window by Safetyline Jalousie (1300 68 3350) and manufactured to achieve (insert N Window Rating & N Water Penetration Rating) as required by Australian Standard AS2047.

The louvre window shall be JX by Safetyline Jalousie with 63mm extruded aluminium frame.

The louvre window shall be capable of a maximum width of 1.4 metres.

Each louvre shall be framed on three sides and hinged at the rear edge.

Glass louvres should require at least 200kg pull out to remove the blades.

Weatherproofing shall be provided by EPDM and polyethylene brush gaskets.

Water drainage is to be via the bottom transom.

The louvre window should be fitted with nylon end caps and capable of opening to 80˚ at an interval of 135mm.

Additional Security shall be provided by a 8mm stainless steel rod inserted into the louvre bearer.

The handle mechanism shall be cam driven and capable of locking in at four different positions.

Internal flyscreens should snap into the frame and be easily removed for cleaning.

Standard Height & WidthJX Safetyline Jalousie Standard HeightsIMPORTANT

• Wherever possible standard heights should be used• Should standard heights not be used a cut down

blade is required. If this blade is less than 60mm the opening would need to be adjusted to standard heights

• Each lever will only lift a number of louvres depending on the type and length. (Refer chart in this section)

• Where one louvre meets the other and a new lever is required a spreader bar is used which is marginally wider than the normal blade holder and the louvre above that join is 10mm smaller (Intermediate Transom)

• Add 38mm to overall frame height if standard reveals are required.

The JX from Safetyline Jalousie

Numbers of Louvres

Overall Frame Height

with bottom transom 7792

Opening Height with head & sill with bottom

transom 7792

2 334 361

3 469 496

4 604 631

5 739 766

6 874 901

7 1009 1036

8 1144 1171

9 1279 1306

10 1414 1441

11 1549 1576

12 1684 1711

13 1819 1846

14 1954 1981

15 2089 2116

16 2224 2251

17 2359 2386

18 2494 2521

19 2629 2656

20 2764 2791

21 2899 2926

22 3034 3061

7791

7792

5

7792

7710

12 7657

7791

5

Height of frame according to the numberof louvres

Intermediate Transom 7798(for glass louvres only)

135

18,6 21,6135

32,1

H

135

1835

7703 Glass louvre trainer body 115 mm

7702 Glass louvre trainer body 135 mm

7702 Glass louvre trainer body 135 mm

7759

7798 Intermediate frame transom

Intermediatetransom for more than 11 louvres

Dimension of glass louvre driver body 7703

H = 103

Intermediate transoms must be used in the case of multiple levers.

Louvre width (mm) 400 600 800 1000 1200 1400

No Louvres Number of Levers Required

3 1 1 1 1 1 1

4 1 1 1 1 1 1

5 1 1 1 1 1 1

6 1 1 1 1 1 1

7 1 1 1 1 2 2

8 1 1 1 1 2 2

9 1 1 1 1 2 2

10 1 1 1 1 2 2

11 1 1 1 2 2 2

12 2 2 2 2 2 2

13 2 2 2 2 2 2

14 2 2 2 2 3 3

15 2 2 2 2 3 3

16 2 2 2 2 3 3

17 2 2 2 2 3 3

18 2 2 2 2 3 3

19 2 2 2 2 3 3

20 2 2 2 2 3 3

21 2 2 2 3 3 3

22 2 2 2 3 3 3

23 3 3 3 3 3 3

Standard Lever Operation - Levers for 6mm Glass Louvres

Frame Joint

7793 7772 VE046Technal sleeve(M5 x 30) 1809

2,4

39,7

Weathering W11086,4

X X‘

JX013.A

7793

7677Technal sleeve(M5 x 30) 1809

Technal sleeve(M5 x 30) 1809

Threaded rod M5(no Technal)

26,2

110,2

Weathering W110

X X‘

7793 7711 VE046Technal sleeve(M5 x 30) 1809

1,2

39,7

Weathering W11085,2

X X‘

Brickwork Timber stud wall

Architrave

Builders paper

Seal by others

Architrave

Cover angle

Builders paper

Flashing by others

Reveal

Reveal

Timber stud wallBrickwork

by others

by others

by others

by others

by others

Fram

eH

eigh

t(FH

)

Brick Veneer

JXBV001

Timber stud wall

by others

by others

by others

by others

Reveal

Reveal

Flashing by others

Builders paper

Architrave

20x12x1.2 angle

Builders paper

Architrave

fixed to frame

Window membrane

Timber stud wall

Stud sizes 70, 76 (steel) 75, 90 & 100

Fram

eH

eigh

t(FH

)

Stud Cladding

JXSC001

Blockwork - Sill Block

Sealant by others

140 Blockwork 290 Blockwork

190 Blockwork

32x12x1.4 Closing Angle

140 Blockwork

190 Blockwork

290 Blockwork

140 Blockwork 190 Blockwork 290 Blockwork

Sealant by others

By others By others

290 Blockwork

190 Blockwork

140 Blockwork

32x12x1.4 Closing Angle

Fram

eH

eigh

t(FH

)

Fram

eH

eigh

t(FH

)

JXBL001

Blockwork - Flat Sill

Sealant by others

140 Blockwork 290 Blockwork

190 Blockwork

32x12x1.4 Closing Angle

140 Blockwork

190 Blockwork

290 Blockwork

140 Blockwork 190 Blockwork 290 Blockwork

Sealant by others

By others By others

290 Blockwork

190 Blockwork

140 Blockwork

32x12x1.4 Closing Angle

Fram

eH

eigh

t(FH

)

Fram

eH

eigh

t(FH

)

Sealant by others

140 Blockwork 290 Blockwork

190 Blockwork

32x12x1.4 Closing Angle

140 Blockwork

190 Blockwork

290 Blockwork

140 Blockwork 190 Blockwork 290 Blockwork

Sealant by others

By others By others

290 Blockwork

190 Blockwork

140 Blockwork

32x12x1.4 Closing Angle

Fram

eH

eigh

t(FH

)

Fram

eH

eigh

t(FH

)

JXBL001

Brick Double - Flat

Brickwork Brickwork

BrickworkBrickwork

Seal by others

Render by others

Render by others

Flashing Flashing

Render by others

Seal by others

Render by others

Brickwork Brickwork

BrickworkBrickwork

Fram

eH

eigh

t(FH

)

Fram

eH

eigh

t(FH

)

JXBD001

Brickwork Brickwork

BrickworkBrickwork

Seal by others

Render by others

Render by others

Flashing Flashing

Render by others

Seal by others

Render by others

Brickwork Brickwork

BrickworkBrickwork

Fram

eH

eigh

t(FH

)

Fram

eH

eigh

t(FH

)

Brickwork Brickwork

BrickworkBrickwork

Seal by others

Render by others

Render by others

Flashing Flashing

Render by others

Seal by others

Render by others

Brickwork Brickwork

BrickworkBrickwork

Fram

eH

eigh

t(FH

)

Fram

eH

eigh

t(FH

)

Brick Double - Sill

JXBD001

Motor Operated LouvresSafetyline Jalousie louvre windows can be motor controlled and integrated with climate control systems or other sensor activated control systems. Motors can be supplied by Safetyline Jalousie or sourced from a third party.

Safetyline Jalousie is currently able to supply a choice of two motors correctly installed on the window frames. Motors are mounted externally on the frame for easy maintenance. Research and development continues to look at other motor options such as motors concealed inside the frame.

Connection to control systems should be arranged separately by a third party specialist to achieve the desired outcome.

The two motor options currently available are:

Louvre Drive LDF 100

Louvre drive LDF 100 has been specially designed for infinitely variable electrical control of louvres.

• All drive functions, characteristics and stroke length are individually programmable via Software

• Equipped with additional passive and active anti pitch function

• Useable for smoke ventilation

• Fire resistance (30 minutes/300°C)

• Stainless steel housing

• Dimensions L 413mm x W 25mm x D 25mm

• Power Supply DC 24V +/- 20%, current consumption 0.8A

• Up to 800N opening force

rechte Ausführung /right version

linke Ausführung /left version

25

25

4 31

Louvre Drive LA 12

Louvre drive LA 12 is an ideal automation solution where small movements are required. Thanks to the small size and outstanding performance, the LA 12 actuator provides a practical and cost-effective alternative to traditional pneumatic systems and gear motors.

• High strength plastic housing (black)

• Reinforced glass fibre piston rod

• Built-in limit switches (not adjustable)

• Dimensions L 245mm x W 50mm x 85mm

• Power Supply DC 12V

• 300 to 750N push thrust

245

LA12 Stainless steel 255mm

22

31.9

19.6

50

85

6.1+0.26.1

+0.2 0

170.7 36.3

20.5

10.1+0.1 0

10.1+0.1 0

16 16.5

01

02

Australia Wide:Head Office:

SMR Designs Pty Ltd ABN 23 123 507 853

7 Tepko Road, Terrey Hills NSW 2084

T 1300 86 3350

www.safetylinejalousie.com.au sales@safetylinejalousie.com.au

Contact Information