Upload
johann-zuchel
View
24
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Reinert-Ritz fabricante de HDPE
Citation preview
d 25mmd 1600mm
90%
PP
10%
PE
We process polyethylene and polypropylene in pipe quality from approved raw-material suppliers, like Borealis/Borouge, Basell and Sasol.
All raw-materials and the self-recycled materials are checked in our test laboratory.
With core competences in designing and producing of pressure fittings we offerour clients customised fittings and a widespread product range covers productssuch as:
Reducers, Tees, Bends and Flanges
in dimensions from d 25mm up to d 1800mm.
Extrusion Hollow bars and solid rods Machining
Customising in our welding-shop
We reduce our products to the essential
Our products are distinguished by
high stability and reliability, as well as by
cost and space saving design.
Stress reduced design is our competence
Our products are designed in conformity with pressure
class!
The pipeline dimensions:
d 900mmSDR 17pressure about 10bar
At first our customer tested segment welded tees:
2 of 3 tees failed in internal pressure creep rupture test!
Internal pressure creep rupture test (DIN EN 12201-3): 20C, t = 12 N/mm, at least 100 h.The segment welded tees failed with less than 1 h.
Internal pressure creep rupture test successfully passed!
After that experience our tees were tested and implemented in the line:
Reinert-Ritz:
was founded in 1970 as engineering consultancy for technical solutions in plastics.
is still a family business (to 100%).
is continuously growing.
has now about 100 employees and a turnover of 13 million Euro.
achieves 50% of the turnover in 33 countries allover the world (400.000 Euro in the United Arab Emirates).
Reduced (and equal) tees from d 280mm up to d 1600mm.
Equal profile tees with outer diameter d 560, 630, 710 and 900mm are cost and space saving manufactured from our patented profile bar.
Inverted level tee
Branches from 45 to 90
DIN
/ IS
O /
AN
SI f
lang
e
Red
uced
flan
geH
igh
pres
sure
(HP
) fla
nge
Evolved from ISO/DIN standards to meet practicalities in the field.
Reduced flange
the fixed flange for stable and cost-effective connections to valves/pumps.
HP flange (high pressure)the loose flange which is as stable as a fixed flange!
up to25 bar
(362 psi)
use valves that are one dimension smaller than the nominal diameter of the line.
freedom of operation for butterfly valves.
no step, no sediment build-up, no bacterial growth.
no backflow reducing efficiency of pumps.
with flange and stub end design that reduces the creep (slow deformation) of the stub end.
also ideal for PE to PE connections.
The stub end is locked by the HP-flange
Special profile sealing gasket
Valve and reduced flange without mismatch
SDR 7.4
nuclear power station
Elbows from 0 to 45 and up to d 1600mm
Bends from 0 to 90 and up to d 900mm
Transition pieces from PE to
steel cast iron PVC stoneware
Pulling heads from d 40mm up to d 1200mm
Dirt trap
Concentric and inverted level reducers from d 50mm up tod 1800mm
Inspection piece Adaptor and extension socket
ODd1
DN (connecting dimensions)DIN/ISO/HP flange Red. flange
50 4063 5075 6590 80 65
110 100 80125 100140 125 100160 150 125180 150 125200 200 150225 200250 250 200280 250315 300 250355 350 300400 400 350450 500 400500 500 400560 600 500630 600 500710 700 600800 800 700900 900 800
1000 1000 9001200 1200 10001400 1400 1300
1600 1600 1500
We can offer our product range in the whole SDRdimensions. Because of our specialization in pressurefittings, our strength are located in the SDR dimensionsfrom SDR 17.6 and higher.
Reinert-Ritz GmbH Ernst-Heinkel-Strae 248531 Nordhorn - Germany
T +49 (0) 5921 83 47 0F +49 (0) 5921 83 47 25
Abu_Dhabi_Mappe.pdftitel2.pdf