Upload
hanga
View
218
Download
3
Embed Size (px)
Citation preview
SBR9 Sacrificial FormWork Pins
Ramset SBR9 sacrificial formwork pins are designed for use with the Ramset FormMasterTM powder actuated fixing system. Ramset SBR9 pins effortlessly fasten
light gauge steel to structural steel. Ramset SBR9 pins are therefore ideal for fastening sacrificial formwork systems and for fastening brick-ties to steel.
RamsetTM SBR9 pins provide the perfect solution for fixing sacrificial formwork to steel structures. Ramset SBR9 pins are compatible with all major sacrificial formwork systems.
• Bondek® • Condeck® HP • KingFlor® • Lysaght W-Dek® • PowerDek® • ReFlor® • ComFlor®
KingFlor®, ReFlor® and ComFlor® are registered trademarks of Fielders Steel Roofing Pty Ltd. Condeck® HP is a registered trademark of Stramit Corporation Pty Limited. Bondek®, PowerDek® and Lysaght W-Dek® are registered trademarks of Bluescope Steel Limited.
SBR9 Features
For further information: Within Australia contact ITW Ramset Australia Pty. Ltd.
1300 780 063 www.ramset.com.au Outside Australia contact ITW Ramset Australia Pty. Ltd.
+61 3 9726 6222 or email: [email protected]
ITW Ramset Australia Pty. Ltd. ABN 48 004 297 009 KingFlor® is a registered trademark of Fielders Steel Roofing Pty Ltd. TM TradeMarks of Cetram Pty. Ltd. used under license by ITW Ramset Australia Pty. Ltd. Condeck HP® registered trademark of Stramit Corporation Pty Limited. © Copyright 2005 DMC/FM/1205 Bondek® is a registered trademark of Bluescope Steel Limited.
Ramset SBR9 Sacrificial FormWork Pins
Specialist Sacrificial FormWork Pins: Order No: SBR9 • Designed for fastening light gauge steel • Designed for use with Ramset FormMasterTM to structural steel instantly. • Compatible with all sacrificial formwork systems; • Large Washer for maximum clamping force Bondek® , KingFlor® , Condeck® HP and more.
Box Quantity: 100
Tapered shank ensures that the washer is held firmly in position over a wide range of materials and penetration depths.
Ballistic pin point for maximum performance and penetration in steel.
Large 14mm diameter washer provides high clamping force and prevents light gauge steel ‘pull-over’.
Knurled shank for maximum tensile capacity in steel.
Large 9mm diameter head suits the Ramset FormMaster tool.