17
Techno India Department of Electronics and Communication Engineering, ========================================== Meghnad Saha Institute of Technology Nazirabad, East Kolkata Township P.O. (Behind Ruby Hospital), Kolkata – 700 107 India In association with Cadence Design Systems India Pvt. Ltd. 2nd Floor, 3B Building, RMZ Ecospace Sarjapur Outer Ring Road, Bangalore - 560 037 India Organizes A Workshop on VLSI Design using Cadence Tools Suite September 5 – 7, 2009. Venue: Advanced VLSI Design Laboratory, Department of Electronics and Communication Engineering, Meghnad Saha Institute of Technology, Kolkata. Overview of the Workshop The aim of this workshop is to give an overview and hands-on experience to the participants on the state-of-theart EDA tools for VLSI Design. This workshop will comprise of lectures delivered by design engineers from Cadence Design Systems followed by hands-on training on CMOS Analog and Digital design. The participants will have an exposure to the Circuit design & Simulation, Layout design, DRC, Physical Verification,

A Workshop on VLSI Design using Cadence Tools Suite

  • Upload
    others

  • View
    12

  • Download
    0

Embed Size (px)

Citation preview

Page 1: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

���� Department of Electronics and Communication Engineering, ==========================================

Meghnad Saha Institute of Technology Nazirabad, East Kolkata Township P.O. (Behind Ruby Hospital), Kolkata – 700 107 India

In association with

Cadence Design Systems India Pvt. Ltd. 2nd Floor, 3B Building, RMZ Ecospace Sarjapur Outer Ring Road, Bangalore - 560 037 India

Organizes

A Workshop on VLSI Design using Cadence Tools Suite September 5 – 7, 2009. Venue: Advanced VLSI Design Laboratory, Department of Electronics and Communication Engineering, Meghnad Saha Institute of Technology, Kolkata.

Overview of the Workshop The aim of this workshop is to give an overview and hands-on experience to the participants on the state-of-theart EDA tools for VLSI Design. This workshop will comprise of lectures delivered by design engineers from Cadence Design Systems followed by hands-on training on CMOS Analog and Digital design. The participants will have an exposure to the Circuit design & Simulation, Layout design, DRC, Physical Verification,

Page 2: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Extraction, with hands-on session on the design and simulation tools (CIC flow, Virtuoso, Spectre, etc.) and a real experience of using the standard cell design flow which is required for ASIC design. This course will be a great experience for the people who are interested to learn the techniques of Analog IC Design as well. This workshop will be beneficial for the participants to develop the EDA Lab (EC792) under WBUT course.

����

Page 3: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 4: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 5: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 6: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 7: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 8: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 9: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 10: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 11: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 12: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 13: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 14: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 15: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Page 16: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

Events and programmers organized by the

Departments

DEPARTMENT OF BASIC SCIENCE & HUMANITIES :

The two days workshop on Global Warming held on 12th

& 13th

of March in the

Conference Hall, TI, Salt Lake.

Workshop coordinator – Dr. Rina Paladhi, Registrar, TI, Salt Lake.

The Speakers were : Dr, S. P. Gon Chowdhury, MD, West Bengal Green Energy,

Development Corporation Ltd., Dr. Shyamal Chakraborty, HOD, Chemistry, CU, Dr.

Tapan Saha, Sr. Scientist, Institute of Environmental Science and Wetland Mgmt.,

Dr. Aniruddha Mukherjee, HOD, Environmenta Science, CU, Dr. N. Bandopadhyay,

Prof of Chemical Engg, Govt. College of Engineering and Ceramic Technology and

Dr. Subhash Roy, Environment Journalist, 24 Ghanta.

Student events were also conducted during the Workshop.

Total 87 student participants attended the workshop, out of which 8 were

external. Total 66 faculties attended the workshop. 21 nos of them were external

faculties from different collellebges.

===================================================================

=======

Page 17: A Workshop on VLSI Design using Cadence Tools Suite

Techno India

The one day workshop on “Mineral resources & their challenges for sustainable

exploitation” held on 31-08-2010, Tuesday at 4:00 pm in the Conference Hall, TI,

Salt Lake.

The speaker was Dr. M.K. Ghose, Professor, Chemistry Dept, TI

Students were also participated the seminar. Total 30 members attended the

seminar.

DEPARTMENT OF FOOD TECHNOLOGY :

A seminar on Herbal Foods and Its Prospects was organized by TIFAC-CORE,

Techno India on 26th

March 2010. at the Conference Hall, Techno India, Salt Lake.

The seminar was inaugurated by Dr. Prabir Banerjee, Joint Secretary, Ministry of

Food Processing Industries & Horticulture, Government of West Bengal. He discussed

the various markets of herbal foods and encouraged the product development in this field. Efforts for

the development of some of the herbal products at the TIFAC-CORE, like herbal cookies, got

appreciation. He also emphasized on the growth potential of herbal foods in the coming years and

encouraged researchers to work in this field.