Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
WALLGARD Homogeneous Compact Wall Vinyl
A heavy duty vinyl wallcovering that provides impact resistance. Wallgard is ideal for areas where abrasion resistance, better hygiene and cleanliness is needed in heavy duty commercial and industrial environments such as healthcare, education and transportable buildings.
Features & benefits• PU-Shield surface treatment • Excellent dirt repellance for long lasting good looks
• Proven hygiene properties • Minimal risk of bacterial and fungal growth
• Homogeneous product • Easy to maintain
• Highest level of fire resistance • Can be used in all building applications in accordance withBCA Specification C10.1 Table 3
• More flexible material • Conformable for easier installation
• Also available in 2.0mm version, same thickness as mostfloorcoverings
• Matching wall and floor thicknesses that creates simplertransitions between floor and walls making installation simpler
• Certified waterproof wall covering• No waterproofing membrane/ tanking required
• Suitable for bathrooms and wet areas• Reduced overall installation cost and saves time onsite
ColoursContact Tarkett for list of stocked colours, non-stocked colours can be supplied with longer lead times
Wallgard 1.3 available in 13 colours with matching colour co-ordinated weld rods. Wallgard 2.0 available in snowflake colour only. Contact Tarkett for more information on technical specification
13 Colours
13
30035
Product Data Sheet
Product Characteristics Standard Wallgard 1.3 Wallgard 2.0
Product construction Homogeneous Homogeneous
Application Wall vinyl Wall vinyl
Surface treatment PU Shield PU Shield
Total thickness ISO 23346 (EN 428) 1.3mm 2.0mm
Wear layer ISO 24340 (EN 429) 1.3mm 2.0mm
Total weight ISO 23997 (EN 430) 2210g 3400g/m2
Available colours 7 coloured whites4 strong pastels2 contrast colours
1 (025) “Snowflake”
Form of delivery EN426 Approx. 30lm x 2m Approx. 20lm x 2m
Warranty 10 years 10 years
Technical Performance Standard Wallgard 1.3 Wallgard 2.0
Dimensional stability ISO 23999 (EN434) ≤ 0.40% ≤ 0.40%
Reaction to fire AS/NZS 3837 : Average specific extinction area
Group 1* 125.8m2/kg
Group 143.6m2/kg
Chemical resistance ISO 26987 (EN 423) Good resistance Good resistance
Fungi and bacteria resistance EN ISO 846 –A/C Does not favour growth Does not favour growth
VOC emissions AgBB/DiBT <10ug/m3 <10ug/m3
Wet room test GBR Class VT Approved Approved
Clean room test ASTM F24/65ASTM F51/00
SatisfactoryClass A
SatisfactoryClass A
Recommended specification clause for your projectTarkett Wallgard product number 21055___Tarkett Wallgard product number 3105___• 1.3/2.0mm thick homogenous 2m wide vinyl wall covering• Phthalate free, TVOC below 10µg/m3
• Reaction to Fire Group 1/ Group 2 (AS/NZS3837)• Approved to wetroom GBR Class VT or better• Clean room test to satisfactory to ASTMF24/65 and to Class A to ASTM 51/100• Where Wallgard is to be used as a waterproof membrane, it must be installed in accordance
with the requirements of Tarkett Codemark Certificate CM30035• Manufactured in plant with certification ISO 9001, ISO 14001 and OHSAS 18601• 10 year commercial manufacturer’s product warranty• Must be installed as per manufacturer’s instructions and as per AS 1884 with multicoloured
weldrod on seams/ joins
The information in this data sheet is correct at date of publication however, due to Tarkett's commitment for ongoing product improvement, we reserve the right to change this information without notice. Please note that Tarkett’s instructions regarding installation, cleaning and maintenance must be observed. Please contact Tarkett for further information on these instructions.
DS 3388 01/16
For more information contact your Tarkett Sales Representative or call 1300 851 484.
www.tarkett.com.au
Product Data Sheet