A-FRAME FLY FORM (F S - irp-cdn.multiscreensite.com · with formwork being an integral part of the A-Frame Fly Form table ... Slab over the slab below ... The main horizontal support

A-FRAME FLY FORM(Floor Supported)

• Usedforsupportingcast-in-placeconcreteslabsinhigh-risecon-struction

• Flexibleandtimesavingsystem

• Fullyadaptabletotheconfigurationandshor-ingheightofaslab

• Muchlighterandcosteffectivecomparedtoconventionaltrusses

ATLAS-SALES.COM | (808) 841-1111

Typical A-Frame Fly Form Cycle

FlyFormTableisplacedontopofpreviouslypouredfloorslab.

FlyFormTablesupportsnewlypouredconcreteslab

WhenconcretereachesrequiredstrengthandEORapprovesstrip,Tableisloweredfrompuredslabandrolledtowardsfrombuildingtoconnecttothecrane

TheFlyFormTableisliftedbycraneandflownoutofthebuildingtonewlevelontopoftherecentlypouredconcreteslab.

1

43

2

Hokua

Ko ‘Olina

Moana Pacific

Ko ‘Olina

BUILDING HAWAII SINCE 1961

A-Frame Fly Form Table

A-Frame Truss Members

A-Frame Versatility

A-FRAME FLY FORM

A-FrameFlyFormTableisanassembledunitofA-FrameFlyFormSystemconsistingofA-FrameTrussesandSlabFormingSurfaceDeckontop.

A-FrameTrussconsistsoffourBasicMembers:1. TopChord,H-750Beam2. A-Frame,WebMember3. BottomChord,H-750Beam(sameasTopChord)4. HingedTableLegWiththedifferentconfigurationofthefourbasicele-ments,theA-FrameTrusscanbeadaptedtosupportalmostanytypeofpour-in-placeconcreteslab.

CapabilityofA-Frametocon-necttotopandbottomTrussChordatanyrequiredloca-tionfortrusslengthsfrom15ftto100ft,andcapabilitytopositionHingedTableLegatanylocationofBottomChordisthekeytocapacityandoveralleffectivenessofA-FrameTrussstructure.

Forming Surface Deck

A-Frame Truss

A-Frame Truss

A-Frame Truss

Top Chord, H-750 Beam

A-Frame Web Member

Bottom Chord, H-750 Beam

Hinged Table Leg

Space between A-Frame provides accessibility

Top Chord

Bottom Chord

Hinged Table Leg (Location Adjustable)

A-FrameVariable Spacing

2


Variable Truss Length

Variable Capacity

Accessibility

A-FRAME FLY FORM

TheoveralllengthoftheA-FrameTrussconfigurationisadjustableinincrementsof5feet,upto100feet.

TheuniquevariablespacingbetweenA-Framescontrolsthecapacityofthetruss.

WhenA-Framesaremovedclosetoeachother,trusscapacityin-creases,supportingtheheavierconcreteweight.Alternately,whenA-Framesaremovedapart,trusscapacitydecreases.

DuetothegenerousspacingbetweenA-Frames,ac-cessissignificantlyimprovedbelowthesoontobepouredconcreteslab.Thisallowsformorecosteffectivemovementofmenandmaterialsinthisarea,aswellasmorethoroughinspectionofelevationsandgeneralconditionofforms.

Increased Truss Capacity Decreased Truss Capacity

15’20’

25’30’

35’Up to 100’

5’ 5’ 5’

3


Height Adaptability

Single and Double A-Frame Truss Construction

A-FRAME FLY FORM

ThreetypesofTableLegsA,B,andCareavailableandusethesamefrictionhingeddevice,sotheycanbeattachedatvariouslocationsalongBottomChord.

TableLegscanbesimplyandefficientlyinterchangedduringconstruction,toaccommodatedifferentfloortofloorheights.

WithMultipleTrussConfiguration,usingA-Framesinone,two,threeorfourrows,theA-FrameTrussescanbeusedforslabshoringheightsfrom6’-6”to28’-0”.

ExtensionLegsareusedincombi-nationwithTableLegsA,BandCtoachieveevengreaterheights.

HingedTableLeg

MultipleA-FrameTrussConfiguration

11” - 16”22” - 33”

31” - 51”With Leg A 40” - 58”/ With Leg B 51” - 76”

Extension Leg C B A

A-Frame

A-Frame

Table LegTable Leg

Extension Leg 6’

-6” t

o 12’

-6”

9’-6

” to

18’-8

”

4


Slab and Beam Structure

Perimeter Beam

Wing Panel

Cantilever Slab

Parapet Wall

A-FRAME FLY FORM

A-FrameFlyFormsarefullyadaptabletoslabandbeamstructures.Beamscanruninoneortwodirections,withformworkbeinganintegralpartoftheA-FrameFlyFormtablestructure.

PerimeterBeamsareeasilysupportedwithTransferCordsandColumnassemblies.TransferCordscanbepositionedatintervalsof4”verticallytoaccommodateavarietyofperimeterbeamdepths.

ForslabareasnotaccessiblewithA-FrameTableForms,WingPanelsareattachedtosidesofTables.

A-FrameTrusscansupportaCantileveredSlabovertheslabbelow,byaddingaCol-umnbetweenTopandBottomChordandpositioningaTableLegunderneath.

DifferentA-FrameTrussheightsandTableLegs,allowconcreteplacementofParapetWallsandSlabatthesametime.

One Way Beam Slab Two Way Beam Slab

Transfer Chord Upper Beam

Perimeter Beam

Column Transfer Chord

Wing Panelin Position

Wing PanelLowered

Parapet Wall

A-Frame

Table Leg

4’8”

Min

.

Cantilever Slab

Column

5


A-Frame System Assembly

A-FRAME FLY FORM

A-Frame, pg 8

Truss Lifting Bracket 7071201, pg 14C-750 Coupler

707110, pg 13

H-750 Top Chord, pg 8

Truss Safety Rail Bracket 7071300, pg 11

2 Bolt Clamp 7070800, pg 11

H-750 Bottom Chord, pg 8

Table Leg, pg 9


6


Table LegA-FRAME FLY FORM

TableLegisconnectedbyhingestoTrussBottomChordandcanbeattachedatanypointalongtheBottomChord.

Inpositionforconcreteplacement

Inpositionfortablerelocation(flying)

Bearing Plate 707443

Jam Plate 7077442

Bearing Head 7074010

Bearing Body

Handle Retainer 7074090

Handle 7074110

Screw Jack Base Plate 7074020

Extension Leg A070601, pg 8

Bearing Body, pg 9

Screw Jack, pg 9

Hinged Jack Pin Bar 7070410, pg 9


Truss Jack Hinge Pin 7070700, pg 10

Hinged Assembly7

ATLAS FLY FORM SYSTEM


A-FRAME FLY FORM

Description Item No. Weight

Use Notes/ObservationsThe main vertical support component for the Fly Form system.

Combines with H-750 Chords and hinged table leg to make an A-Frame Truss.

Use Notes/ObservationsThe main horizontal support component for the Fly Form system.

Combines with A-Frame and hinged table leg to make an A-Frame Truss.

Use Notes/ObservationsProvides additional support where A-Frame instal-lation is not practical

Attaches with 2 bolt clamp to H-750

Notes/Observations

A-FRAME3’-0”A-FRAME(specialorder) 7070103 29LB

4’-0”A-FRAME(specialorder) 7070104 37LB

5’-0”A-FRAME(stock) 7070105 42LB

H-750 CHORDSH-750CHORD1’-0”(specialorder) 7070201 5.5LB

H-750CHORD2’-0”(specialorder) 7070202 10.9LB


H-750CHORD5’-0”(stock) 7070205 27.25LB


H-750CHORD10’-0”(stock) 7070210 54.5LB

H-750CHORD15’-0”(stock) 7070215 81.75LB

H-750CHORD25’-0”(stock) 7070225 136.25LB

TRUSS COLUMNTRUSSCOLUMN4’-0” 7070999 12LB

TRUSSCOLUMN5’-0” 7071000 14.5LB

UseUsed to extend height of standard truss table legs to reach greater heights

33-50” addition to standard table legsCustom item. Requires cross brace (x2) for stability.

TRUSS EXTENSION LEG ASSEMBLY A070601 32LB

8



A-FRAME FLY FORM

A

B

C

D

H

GF

E

I

H

J

K, L, M

Use Notes/ObservationsAdjustable jack for Fly Form system. The hinged jack truss comes fully assembled with all these parts

Can be positioned at various locations on the bottom chord (H-750) and inter-changed to accommodate different floor to floor heights. Hinged feature assures easy installation and removal. Variations in body and screw length allow for the various truss jack lengths.

HINGED TRUSS JACK COMPONENTSATRUSSJACKTOPCASTING 7074010 6.76LB

BTRUSSJACKBASECASTING 7074020 4.31LB

CTRUSSJACKBODY VARIES

D TRUSSJACKBASESCREW VARIES

ETRUSSJACKRETAINERRING 7074090 .2LB

F TRUSSJACKRETAINERBRACKET 7074100 .45LB

G TRUSSJACKHANDLENUT 7074110 1.42LB

HTRUSSJACKSETSCREW3/8”X3/8” 7074120 .1LB

IJAMPLATE 7077442 .8LB

JBEARINGPLATE 7077443 1.9LB

KHINGECONE-HEADBOLT1/2”X2” 7077444 .1LB

LWASHER,FLAT,1/2”ZINC 1000800 .1LB

MNUT,1/2”,G5,ZINC 73023 .1LB

Weight

HINGED JACK PIN BARHINGEDJACKPINBAR#1 7070410 0.25LB

HINGEDJACKPINBAR#2 7070411 0.25LB

Description Item No.

TRUSS JACK HINGEDTRUSSJACKHINGED8”-12” 7070400 22LB

TRUSSJACKHINGED11”-16” 7070401 32LB




Use Notes/ObservationsHolds Hinged Truss Jack in place with Truss Jack Hinge Pin when Jack is in “fly” position.

Attaches to the top of the base of the A-Frame.

9



A-FRAME FLY FORM


Use Notes/ObservationsThe lag clip is used to attach a 2x rub rail along the outside edge of table joists to make flying proce-dure easier and to prevent edge damage to form ply and end damage to joists.

Attach t-bolt assembly to slot in joist and lag screw (by GC) to 2x rub rail

Use Notes/ObservationsUsed when trusses need to move in more than one direction in order to remove from building.

Custom item

TRUSS CASTER 7072300 12LB

LAG CLIPLAGCLIP-STEEL/ZINC 7071500 0.5LB

LAGCLIP-ALUMINUM 7071501 0.25LB

Use Notes/ObservationsUsed in typical truss flying applications to roll the truss out of the building.

3,000 lb. capacity Custom item

TRUSS ROLLER 7071800 32LB

10

Use Notes/ObservationsAttaches truss jack top casting to hinge assembly. Also holds truss jack in upright position when truss is moving or in flying form.

Used in conjunction with hinged jack pin bar

TRUSS JACK HINGE PIN 7070412 .44LB




A-FRAME FLY FORM

Weight

Use Notes/ObservationsProvides a simple socket for installation of a safety rail post using nominal 2x4.

Attached to truss top chord with 2-bolt clamp or to typical aluminum beam with strap clamp.

Use Notes/ObservationsAttaches A-Frame to H-750. Installs via slot at the end of H-750 to

fasten bottom of A-Frame to truss chord.

Description Item No.

Use Notes/ObservationsAttaches column-post to H-750. Commonly used for columns and items

other than A-Frames not using 2 or 3 bolt clamp.

1 BOLT CLAMP 7070700 .38LB

Use Notes/ObservationsAttaches A-Frame to H-750. Installs via slot at the end of H-750 to

fasten tops of A-Frame to truss top chord and safety rail bracket.

2 BOLT CLAMP 7070800 1LB

TRUSS SAFETY RAIL BRACKET 7071300 10.2LB

11

3 BOLT CLAMP 7070900 1.5LB



A-FRAME FLY FORM


Use Notes/ObservationsAttaches joist to truss chords or any other item to joists/stringers

Supplied with t-bolt assembly

Use Notes/ObservationsAttaches to bottom of top H-750 Chord and allows for connecting of wing panel where A-Frame access is not possible

TRUSS HINGE WING PANEL ASSEMBLY A071700 12LB

JOIST CLIP ASSEMBLY JCLIP .34LB

HEAVY DUTY TRUSS CROSS BRACETRUSSCROSSBRACE7X2.5 7070706 40LB

TRUSSCROSSBRACE7X4 7070707 34LB

TRUSSCROSSBRACE10X4 7070710 40LB

TRUSSCROSSBRACE12x4 7070712 46LB

TRUSSCROSSBRACE5X2.5 7070756 21LB

TRUSSCROSSBRACE10X2.5 7070730 40LB

STANDARD CROSS BRACECROSSBRACE4x4/5-WHITE BC0445 8LB

CROSSBRACE5x4/5-RED BC0545 9LB

CROSSBRACE6x4/5-ORANGE BC0645 11LB

CROSSBRACE7x4/5-YELLOW BC0745 12LB

CROSSBRACE8x4/5-BLACK BC0845 14LB

CROSSBRACE10x4/5-GREEN BC1045 16LB

Use Notes/ObservationsInternal cross support between the two side trusses of the A-Frame Table.

Heavy duty braces for heavy duty ap-plications

12



ATLAS-SALES.COM | (808) 841-1111 ATLAS-SALES.COM | (808) 841-1111

A-FRAME FLY FORM

WeightDescription Item No.

13

Use Notes/ObservationsJoins two H-750 Chords together. The use of full moment splice plates may

be necessary in areas where a stronger joint is required.

C-750 COUPLER 707110 9LB

Use Notes/ObservationsThis three piece support system strengthens the joint formed between two H-750 Chords and is nec-essary when the joint strength is required to be the same as the rest of the length of the two chords.

The bottom two plates rest in the top and bottom channel of the chords and the top plate fills the space in the middle. Held in place with 4 bolt assemblies (#72031A). Full moment splice plate assembly is always used in conjunction with the C-750 coupler.

FULL MOMENT SPLICE PLATE ASSEMBLY 7071110 5LB

Use Notes/ObservationsSet of four to hold full moment splice plate as-sembly together

Assembly includes G5 rated nut and bolt, and two washers.

BOLT ASSEMBLY 3/4”X3.50”, G5 72031A 1.75LB

Installed with two sets of the full moment splice plate as-sembly, on the top and bottom of the H-750 chord, C-750 coupler, and held in place with four (4) bolt assemblies.

Perspective of two H-750 chords being joined together with four (4) bolt assemblies



A-FRAME FLY FORM


Use Notes/ObservationsTo adjust the height of fly form tables when positioning

Used to lower Fly-Forms from poured position to rolling position.

Use Notes/ObservationsAttaches to top chord and is used for lifting the truss.

Second generation of fixed lifting bracket. More flexible in positions after table is built. Angled pick bar to lower stress on welds. Replaces #7071200

TRUSS LIFTING BRACKET - 2 PIECE 7071201 5LB

Use Notes/ObservationsFacilitates the lifting, placing and removal of fly form tables.

LOAD COMPENSATORLOADCOMPENSATOR-CM001ASSY LCCM5T001 894LB

CHAINBRIDLE,3/8X20,7/8ML,CLVSHKS CB20MCH 10LB

RACKFORLCCM5T LC5TRACK 350LB

14

Use Notes/ObservationsAttaches to top chord and is used for lifting the truss.

Requires 2-bolt clamp to attach to H-750. Superseded by 2 piece bracket 7071201

TRUSS LIFTING BRACKET - FIXED 7071200 6.4LB

TRUSS HYD. JACK 4 TON “LINCOLN” 26” 7072000 222LB




A-FRAME FLY FORM

45/16”

61/2”or

71/2”

WeightDescription Item No.

ALUMINUM BEAMS (JOISTS)Availablein1’incrementsfrom61/2”x3’-61/2”x24’ ~3.51lb/linearft.

ALUMINUM BEAMS (STRINGERS)Availablein1’incrementsfrom71/2”x3’-71/2”x24’ ~3.67lb/linearft.

Use Notes/ObservationsServes as the main horizontal support component of the upper portion of the A-Frame truss and sup-ports the plywood decking.

Most applications will use the 6 1/2” joists, for heavy duty applications where the poured floor is particularly thick the 7 1/2” stringer is used.Please ask your sales representative about availability and recommended use.

15

Use Notes/ObservationsTo lower tall fly forms Has bi-directional rollers to facilitate 360°

movement of table

HL FLY FORM HYD. JACK DOLLIE HLFFHJD 55LB

Use Notes/ObservationsTo adjust the height of fly form tables when positioning

Used to lower Fly-Forms from poured position to rolling position.

TRUSS HYD. JACK 3 TON NORCO 3 7072050 162LB

Documents

A-FRAME FLY FORM (F S - irp-cdn.multiscreensite.com · with formwork being an integral part of the A-Frame Fly Form table ... Slab over the slab below ... The main horizontal support