Shown: Profit Puller™ #832165
Rollers are quickly and easily adjusted for exact pulling
height
Adjustable Measure Rite™ unibody tie-downs with 5 different
height settings with drive-over bases for fast set-up
Tie-down slots on the outside, center, and inside of
treadways
Totally enclosed laser-cut bed w/double rigid H-frame
construction
Air/hydraulic pumps
Optional Pow'r Pusher
Clear Floor Wheel-less technology! Towers roll around Chassis
Liner’s exclusive roll-a-matic track
Unique two-slotted jaw allows 2 pulls per tower
POWDER
CO AT E
D
NE
W POWDER
CO
ATED FIN
ISH
• 10 -Ton Pulling Power
• 360° Pulling• 2 Towers• 2 Pulls Per Tower
• Laser cut chain tie-down slots along the outside, center and
inside of the treadways allow for hundreds of tie-down
possibilities for quick anchoring
Features
– (2) 10 Ton wheel-less, slotted towers with hydraulic ram,
hose, pump & gauge
– (2) 10’ Chains 3⁄8" with slip hooks
– (2) Tower rollers
– 15-Ton heavy-duty ram on lift with air pump
– Removable front cross member
Model PP 18 #832165
Weight 5,000 lbs. (2268 kg)
Length 18' (5.5m)
Bed Width 76" (1.94m)
Treadway Width 20" (.51m)
Working Height 21" (.53m)
Tower Height 60" (1.52m)
Lifting Capacity 15-Ton Ram on Lift
Specifications
– (4) Powder coated drive-over bases
– (4) Adjustable height, powder coated Measure Rite unibody
tie-downs
– (4) Powder coated upright holders with pins
– 1 Set of heavy-duty ramps
– 1 Outside sign
– Extra Slotted Tower (Complete w/ Ram, Pump, Roller &
Chain), #832233
– Quick Ratchet Truck Universal Anchoring, #784201
– BMW / Mercedes Adapters, #784130
– Honda / Acura Adapters, #784125
– Power Pusher with 10 -ton Ram & hose, #784255
– Fast Jack, Air Jack, #784160
– Corvette Adapters, #784157
Options
NEW
1-800-242-2448 www.chassisliner.com
18' Profit Puller™ PlusRounded bed with wheel-less towers –
Portable design fits a
12' x 20' stall with 8' ceiling
Lit#832165-2012.05
Shown: Profit Puller™ #832171
Rollers are quickly and easily adjusted for exact pulling
height
Adjustable Measure Rite™ unibody tie-downs with 5 different
height settings with drive-over bases for fast set-up
Tie-down slots on the outside, center, and inside of
treadways
Towers roll around bed in Chassis Liner’s exclusive EZ-Glide
Track™
Unique two-slotted jaw allows 2 pulls per tower
Totally enclosed laser-cut bed w/double rigid H-frame
construction
Air/hydraulic pumps
Optional Pow'r Pusher
• 10 -Ton Pulling Power
• 360° Pulling• 2 Towers• 2 Pulls Per Tower
• Laser cut chain tie-down slots along the outside, center and
inside of the treadways allow for hundreds of tie-down
possibilities for quick anchoring
POWDER
CO AT E
D
NE
W POWDER
CO
ATED FIN
ISH
Features
– (2) 10 Ton, slotted towers with hydraulic ram, hose, pump
& gauge
– (2) 10’ Chains 3⁄8" with slip hooks
– (2) Tower rollers
– 15-Ton heavy-duty ram on lift with air pump
– Removable front cross member
Model PP 16 #832171
Weight 4,400 lbs. (1996 kg)
Length 16' (4.88m)
Bed Width 76" (1.94m)
Treadway Width 20" (.51m)
Working Height 21" (.53m)
Tower Height 60" (1.52m)
Lifting Capacity 15-Ton Ram on Lift
Specifications
– (4) Powder coated drive-over bases
– (4) Adjustable height, powder coated Measure Rite unibody
tie-downs
– (4) Powder coated upright holders with pins
– 1 Set of heavy-duty ramps
– 1 Outside sign
– Extra Slotted Tower (Complete w/ Ram, Pump, Roller &
Chain), #832233
– Quick Ratchet Truck Universal Anchoring, #784201
– BMW / Mercedes Adapters, #784130
– Honda / Acura Adapters, #784125
– Power Pusher with 10 -ton Ram & hose, #784255
– Fast Jack, Air Jack, #784160
– Corvette Adapters, #784157
Options
1-800-242-2448 www.chassisliner.com
16' Profit Puller™Portable design fits a 12' x 20' stall with 8'
ceiling
Lit#832171-2012.05
