Stubble cultivator with multipurpose tines

CULTIMER Lwww.kuhn.com

be strong, be KUHN

2

CULTIMER L 1000

3

MULTIPURPOSE

TO THE TIP OF ITS TINES

• You want to carry out surface stubble cult ivat ion,3-7 cm, and sett ing up a real stale seedbed.

• You want to carry out stubble cult ivat ion and incorporate straw to a depth of 7-15 cm, in order to keep organic matter near the surface.

• You want to carry out deep stubble cult ivat ion down to 35 cm, and replace plough use.

• You would like to loosen the soil deep down for good water penetrat ion, and for lower power consumpt ion, thus fuel consumpt ion.

• You consider quick, easy sett ings to be of upmost importance.

• You would like a machine that can adapt to all of your soil types, with a t ine that is stable in the ground.

• You want to reduce operat ing costs by using carbide wear parts.

Opt for a CULTIMER L, to be able to adapt to different types of jobs, be sure of getting high quality work done with a simple, robust, effi cient, and versatile tool, and reduce maintenance costs by using high quality wear parts. These 3 advantages combined in one package, make this machine one of the most versatile and effi cient stubble cultivators on the market.

Working width (m)

Models

CULTIMER L 4000 13 4.00

CULTIMER L 5000 16 5.00

CULTIMER L 6000 19 5.85

Number of tines

KUHN stubble cultivators with multipurpose tines in brief:

CULTIMER L 1000

2

2

1

4

WITH HIGH QUALITY STUBBLE CULTIVATION, YOU CAN ONLY WIN !

SOIL DEPTH MAINTAINED BY600 KG TINES

1 The t ine’s working depth is maintained at a constantlevel thanks to the new double spring mechanicalNon-Stop safety system. In any soil type, and especiallyin stony soil, the 600 to 800 kg t ip pressure carries out homogeneous work.

2 High quality materials are used to produce this robust design. Drop-forged fl ange and beam.

3

5

The curved shape and bevelled defl ectors carry out a homogeneous straw and soil mix. The soil is ejected to the front and taken again by the t ine.

3 Effi cient work, even in stony ground. The t ine is madeof high tensile strength steel so can shift to the side before shift ing vert ically.

EXCEPTIONAL MIXING QUALITY

CULTIMER L 1000

To achieve quality work, it is

necessary to have well levelled

soil and a good straw spread.

On a fl at surface, the roller works

more effectively and its pressure

on the soil is homogeneous

which prevents any windblown

effect.

• levelling discs:

Elastomer safety makes them

highly versatile in any

conditions, including stony

ground.

Depending on your

soil type, KUHN has

the roller that best suits your situation.

From the lightest

to the heaviest,

each model has its specialty:

WELL LEVELLED SOIL FOR QUALITY STUBBLE CULTIVATION

EVERY SITUATION HAS ITS ROLLER

6

T-Ring: light roller, aggressive

on clods and straw. Maintains good coarse soil. Ideal for silty

soils. 600 mm and 130 kg/m

(available season 2016).

T-Liner: the new light

multipurpose roller for stony and wet conditions. It is as aggressive

as the T-Ring. 600 mm and 140

kg/m in treated steel. Impact

and wear resistant.

The CULTIMER L has exceptional driving capacity to work in any type of crop residue, including grain corn.

With 85 cm under-frame clearance and 70 cm beam spacing, residues are incorporated into the soil with no

problem of blockage.

The tines are positioned every 30 cm which is the optimum spacing for residue passage. The machine works

well, even at high speeds.

7

Packliner: rubber coated roller,

ideal in light soil or to ensure maximum surface area soil

tamping. 600 mm and

165 kg/m.

HD-Liner 600: the new heavy, high tamping capacity

roller. The V-shape spreads the pressure out

vertically and obliquely, for deep down tamping along

the length of the roller. 600 mm and 180 kg/m

in impact and wear resistant, treated steel.

CULTIMER L 1000

1

3 4 5

2

For operating comfort, the machine is easy to handle on headlands and has a parallellift system.Quick, easy levelling disc adjustment by crank handle. 3

Note: Depth control is possible by controlling the front wheels. 4 The drawbar 5 fl oats in this case and the machine can contour the ground more precisely.

Simple machine depthadjustment by spacers 1 on the lift arms 2 .

Compact machine, less than3.00 in width and highly stable in transport.

8

SIMPLE SETTINGS SPECIALLY FOR YOUR COMFORT

COMFORT ON THE ROAD

WITH SUSPENSION AND

MECHANICAL LOCK

SAFETY

• Front wheels for stabilizing or control depth. Quick, easy adjustment.

• Cover crop seed drill. To opt imize your stubble cult ivat ion passage and seed your cover crops at the same t ime.SHs units have a capacity of between 200 and 380 litres for high on the job autonomy.

• A drawbar extension is available on request to obtain a steering angle of 110 ° with tractors fi tted with twin tyres.

9

OPTIONS THAT MAKE THE DIFFERENCE

CULTIMER L 1000

10

MULTIPURPOSEEFFICIENT TINES

DEEP STUBBLE CULTIVATION: 80 MM TIPS AND 350 MM FINS

Mounted as standard on the CULTIMER, this t ip can be equipped with 2 side fi ns for stubble cult ivat ion at a depth of 7-15 cm. Without the fi ns, this share can work down to 35 cm.

INCREASED LONGEVITY: CARBIDE TIP AND FINS

The lifespan of these parts is 5 t imes longer than for convent ional parts thanks to their carbide plates: t ime and labour saving. The 50 mm t ip is intended for deep soil restructuring (35 cm) with limited power requirement.

SURFACE STUBBLE CULTIVATION:DUCK-FOOT SHARE

This 350 mm share, is designed part icularly for surface stubble cult ivation. Even at limited depths (3 to 7 cm), is scalps the top soil.

LOW MAINTENANCE COSTS

Our carbide wear parts (t ips) are forged then treated. This makes them robust and extremely wear resistant. The grooves on the upper side fi ll with soil and reduce wear even further by the soil-soil contact.In addit ion, the carbide plates are posit ioned in3 separate areas on the t ip ensuring except ional soil penetrat ion on hard ground, reduced power requirement and a long life in terms of wear.

Note: The carbide plates tuck under the t ip to prevent them from detaching in stony condit ions.

LOW OPERATING COSTS

MAINTENANCE TIME SAVINGS

The t ines and the levelling disc hubs are maintenance-free to save you t ime.

11

ADVANTAGES TO GET MAXIMUM USE OUT OF YOURMATERIAL AND MAXIMUM PROFITABILITY

KUHN SERVICES:*

Get your part 24/7You need a spare part fast. With KUHN sos order, you benefi t from express delivery 7 days a week, 362 days a year.Down-t ime is kept to a minimum and work output improved.

The professionals’ choice36 months peace of mind with KUHN PROTECT+ warranty. You can concentrate on the job at hand and the performance of your machine. Because that’s what you expect from invest ing in ahigh-tech machine.

For increasingly rapid repairs!An unexpected technical hitch always happens at the wrong t ime. With KUHN I TECH, your Authorized KUHN Partner, your pro-blem will be fi xed in no t ime, and effect ively. You’ll get a rapid, accurate diagnosis with this on-line tool available 24/7.

Rational investment!You need a new machine, but are unsure of fi nancing. Modernize your equipment and improve your farm with KUHN FINANCE – according to your requirements in total security. We have custom-made fi nance plans to meet your requirements.

*Not all services are available in all countries.

Specifi cations Multipurpose stubble cultivator with tines

CULTIMER L

4000

CULTIMER L

5000

CULTIMER L

6000

Min. tractor power (kW/hp) 120/160 150/200 180/240

Max. tractor power (kW/hp) 209/280 260/350 313/420

Working width (m) 4,00 5,00 5,85

Transport width (m) 2,82

Beam dimension (mm), 8 mm thick central beam 260 x 180, extension 120 x 80, t ine support 100 x 100

Number of t ines 13 16 19

Number of levelling discs opt ion 10 12 14

Approx. weight (kg) with HD-Liner 600 mm roller 4300 5400 5900

Approx. weight (kg) with T-liner roller 4150 5200 5650

Linkage 3 and 4 standard

Transport wheels 520/50-17

Suspension As standard

Front control wheels As an opt ion 340/55-16

Working depth sett ing 5 to 35 cm working depth, 10 km/h average speed

Under beam clearance (cm) 85

Tip width with defl ector in mm (without fi ns) 80

Hydraulic adaptat ion lift: DA - folding: DA

Breaks hydraulic as standard

CULTIMER L

1 2 3 4 5

To p

rote

ct the

env

ironm

ent

, th

is leafl

et is p

rint

ed o

n ch

lorine

-free p

aper. /

Print

ed in

Franc

e - 9

50

04

6 G

B - 1

0.1

6 - C

opyr

ight

20

16

KU

HN

Also fi nd KUHN on

Your Authorized Dealer

www.kuhn.com

Information given in this document is only for information purposes and is non-contractual. Our machines are in compliance with regulations in force in the country of delivery. In our literature, and for improved illustration of certain details, some safety devices may not be in operating position. When operating these machines, these devices must be in position in accordance with the requirements indicated in the operator’s manuals and assembly manuals. Respect the tractor gross vehicle weight rating, its lift capacity and maximum load per axle and tyres. The tractor front axle load must always comply with the regulations of the country of delivery (In Europe, it must reach minimum 20 % of the tractor net weight). We reserve the right to change any designs, specifi cations or materials listed without further notice. Machines and equipment in this document can be covered by at least one patent and/or registered design. Trademarks cited in this document may be registered in one or several countries.

MULTIPURPOSE TO THE TIP OF THEIR TINES

4000 5000 6000

Find your closest authorized KUHN dealer on

www.kuhn.com

Farmers have different issues but common object ives: reducing the cost of crop establishment and high work output without compromising yield potent ial.The CULTIMER L was designed in order to offer you a mult ipurpose machine, quick and easy to adjust, to increase your work output and maintain the quality of your soil.

Find us on YouTube.

Discover our KUHN range of disc and tine stubble cultivators

1. OPTIMER+ 2. DISCOVER 3. DISCOLANDER 4. CULTIMER L 5. PERFORMER

STUBBLE CULTIVATION RANGE

OPTIMER+ DISCOVER DISCOLANDER CULTIMER PERFORMER

Working width (m/ft)3/9’10“ to 7.5/24’7“

3.40/11’1“ to 5.20/17’

3.70/12’1“ to 6/19’7“

3/9’10“ to 6/19’7“

4/13’ to 7/22’9“

Transport width (m/ft)3/9’10“ and

4/13’< 2.65/8’8“ 2.55/8’3“

2.82/9’2“ to 3.50/11’4“

3/9’10“

Number of discs or t ines 24 to 60 discs 28 to 44 discs 32 to 52 discs 10 to 19 t ines 14 to 26 t ines

Recommended working depth (cm) 3 to 10 5 to 18 5 to 18 5 to 35 10 to 35

Mounted or trailed version Mounted and Trailed Trailed Trailed Mounted and Trailed Trailed

KUHN HUARD S.A. 2, rue du Québec - Zone HorizonF-44110 Châteaubriant - FRANCE

KUHN NORTH AMERICA, INC.1501 West Seventh Avenue - Brodhead, WI 53520 - USA

KUHN FARM MACHINERY PTY. LTD313-325 Foleys Road - Deer Park, VIC, 3023 - AUSTRALIA

KUHN FARM MACHINERY (U.K.) LTDStafford Park 7 - GB TELFORD/ SHROPS TF3 3BQ