Upload
others
View
16
Download
0
Embed Size (px)
Citation preview
CHAIN TRAY KIT FOR A SLIDE GATE
2601-279-D-10-15
DoorKing Part Number
2601-270
Copyright 2015 DoorKing, Inc. All rights reserved.
Works with all Doorking slide gate operators (Typically for operators that are post or pedestal mounted) and by connecting multiple 10 ft sections together (Sold separately), will fit any length gate. The chain tray is typically used for gates longer than 20 feet in length. The chain tray helps support the weight of the chain (up to #100 chain link size) and reduce the chain stretching that occurs over time.
Installation
Kit Includes: 1 - 10 ft chain tray section
6 - carriage bolts and nuts
3 - support brackets
Support BracketFacing Up
(Lower chain position)
Support BracketFacing Down
(Higher chain position)
Support BracketExtended
Typical Post MountPedestal Mount
Extended Mount
2”
1.8”
2”
Gate
Fra
me
Gate
Fra
me
1.8”
4”
1.8” 4”
7”3”
5”
4”8.5”6.75”
5.25”
SupportBracket(Facing down) Support
Bracket(Extended)
SupportBracket(Facing up)
Weep Hole(Drainage)
Carriage Bolts
A chain’s normal sagging distance should be at least one (1) inch per 10 feet of gate. Mount the chain tray higher than the chain’s normal sagging distance. The support brackets should be welded to the gate.
10 ft. Segment
Chain TraySegments
Connection
10 ft. Segment
1”
4”
4”
9500
92009000
1”
905091009150
Gate
Fra
me
Gate
Fra
me
Gate
Fra
me
Gate
Fra
me
120 S. Glasgow AvenueInglewood, California 90301 U.S.A.