940 Warehouse Shipping Order Functional Group ID= OWs3.amazonaws.com/aggateway_public/AgGatewayWeb/eConnectivity/EDI/s... · 940 Warehouse Shipping Order Functional Group ID= OW Introduction:

940 Warehouse Shipping Order

Functional Group ID=OW

Introduction:

This transaction set is used to notify a public warehouse of an order to be shipped. All information needed to produce a bill of lading, pick ticket, and other shipping papers should be contained in the 940 transaction. The warehouse is responsible for creating the bill of lading and should use the appropriate form and format, as approved by the DOT and warehousing industry. Manufacturers, or other shippers, reserve the right to review and approve the forms used by the warehouse.

Heading:

Pos. Seg. Req. Loop Notes andNo. ID Name Des. Max.Use Repeat Comments

Must Use ST Transaction Set Header M

Must Use 020 W05 M 1

LOOP ID - 10

040 N1 O 1

050 Additional Name Information 2

060 N3 O 2

070 Geographic Location O 1

080 PER Administrative Communications Contact 5

090 N9 O 10

100 Contact O 3

G62 Date/Time O

120 NTE Note/Special Instruction O

130 W09 Equipment and Temperature 1

140 W66 O 1

Not Used W6 Special Handling Information O 1

153 R2 Route Information 13

Not Used 156 Rail Shipment Information 1

LOOP ID - 0200

Not Used 160 LM 1

Not Used 170 Industry Code M 100

Pos. Seg. Req. Loop Notes andID Name Des. Repeat

LOOP ID - 0300 >1

LX Assigned Number O

Not Used 010 MAN O >1

Not Used SDQ Destination Quantity O

Not Used 016 N1 O 1

S940 (004010) November 19, 1998

Not Used 017 G62 Date/Time O 10

LOOP ID - 0310 >1

020 W01 Line Item Detail - Warehouse O 1

030 G69 Line Item Detail - Description O 5

040 N9 Reference Identification O 200

Not Used 045 NTE Note/Special Instruction O >1

050 W20 Line-Item Detail - Miscellaneous O 3

Not Used 070 QTY Quantity O 10

Not Used 080 AMT Monetary Amount O 1


Not Used 100 G66 Transportation Instructions O 1

Not Used 110 N1 Name O 3

Not Used 112 PER Administrative Communications Contact O 5

Not Used 114 LH2 Hazardous Classification Information O 6

Not Used 116 LHR Hazardous Material Identifying Reference Numbers

O 1

Not Used 118 LH6 Hazardous Certification O 5

LOOP ID - 0320 10

Not Used 120 LM Code Source Information O 1

Not Used 130 LQ Industry Code M 100

Not Used 135 LS Loop Header O 1

LOOP ID - 0330 >1

Not Used 140 LX Assigned Number O 1 n1

Not Used 150 N9 Reference Identification O >1


Not Used 170 N1 Name O 1

Not Used 175 SDQ Destination Quantity O >1

LOOP ID - 0331 10

Not Used 180 LM Code Source Information O 1

Not Used 190 LQ Industry Code M 100

LOOP ID - 0332 >1

Not Used 200 LH1 Hazardous Identification Information O 1

Not Used 210 LH2 Hazardous Classification Information O 4

Not Used 220 LH3 Hazardous Material Shipping Name O 10

Not Used 230 LFH Freeform Hazardous Material Information O 20

Not Used 240 LEP EPA Required Data O 3

Not Used 250 LH4 Canadian Dangerous Requirements O 1

Not Used 260 LHT Transborder Hazardous Requirements O 3

Not Used 270 LHR Hazardous Material Identifying Reference Numbers

O 5

Not Used 280 PER Administrative Communications Contact O 5

Not Used 285 LE Loop Trailer O 1

LOOP ID - 0340 >1

Not Used 290 FA1 Type of Financial Accounting Data O 1

Not Used 300 FA2 Accounting Data M >1

S940 (004010) 2 November 19, 1998

Pos. Seg. Req. Notes andNo. ID Des. Max.Use Repeat010 W76 Total Shipping Order 1

Must Use 020 Transaction Set Trailer M 1

1. The LX loop conveys serial number data.

S940 (004010 3 November 19, 1998

Segment: ST Transaction Set Header

Position: 010Loop:

Level: HeadingUsage: Mandatory

Max Use: 1Purpose: To indicate the start of a transaction set and to assign a control number

Syntax Notes:Semantic Notes: 1

810 selects the Invoice Transaction Set).Comments:

Ref. DataDes. Name Attributes

>> 143 Transaction Set Identifier Code M ID 3/3

940 Warehouse Shipping Order

>> 329 Transaction Set Control Number M AN 4/9

S940 (004010 4 November 19, 1998

Segment: W05 Shipping Order Identification

Position: 020Loop:

Level: HeadingUsage: Mandatory

Max Use: 1Purpose: To transmit identifying numbers and other basic data for this transaction set

Syntax Notes: 1 If either W0504 or W0505 is present, then the other is required.Semantic Notes:

Data Element SummaryRef. Data

Element Name AttributesW0501 473 Order Status Code ID 1/1

Code identifying purpose of transaction set

D Delete

F Cancel

N Original

R Change

>> W0502 285 Depositor Order Number M AN 1/22

Identifying number for warehouse shipping order assigned by the depositor

W0503 324 Purchase Order Number AN 1/22

Identifying number for Purchase Order assigned by the orderer/purchaser

Customer Purchase Order Number

W0504 472 X N0 6/6

A two-part number in the form "SSSTTT" where "SSS" is a sequentially assigned number and "TTT" equals the highest sequential number being

both "SSS" and "TTT")

Stop Number

474 Master Reference (Link) Number X AN 1/22

invoices or other transaction sets, use the master reference (link) number to identify the group and the link sequence number to identify individual

Manufacturer's Master Order Number

X 640 Transaction Type Code O

Code specifying the type of transaction

004010 Data Element Dictionary for acceptable code values.

S940 (004010) 5 November 19, 1998

X W0507 306 Action Code O ID 1/2

Code indicating type of action

Refer to 004010 Data Element Dictionary for acceptable code values.

S940 (004010) 6 November 19, 1998

Segment: N1 Name

Position: 040Loop: 0100 Optional

Level: HeadingUsage: Optional

Max Use: 1Purpose: To identify a party by type of organization, name, and code

Syntax Notes: 1 At least one of N102 or N103 is required.2 If either N103 or N104 is present, then the other is required.

Semantic Notes:Comments: 1 This segment, used alone, provides the most efficient method of providing

organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.

2 N105 and N106 further define the type of entity in N101.Notes: This is an optional segment for the Carrier.

Data Element SummaryRef. DataDes. Element Name Attributes

>> N101 98 Entity Identifier Code M ID 2/3

Code identifying an organizational entity, a physical location, property or an individual

BY Buying Party (Purchaser)

CA Carrier

CN Consignee

RAPID is denoting this value as Consignor (Manufacturer)

PF Party to Receive Freight Bill

RAPID is denoting this as Party to pay freight bill

ST Ship To

WH Warehouse

N102 93 Name X AN 1/60

Free-form name

Warehouse Name (Actual Name) - If N101 = WHSold To Name (Actual Name or Buying Party) - If N101 = BYStore Name (Actual Name) - If N101 = STManufacturer Name - If N101 = CNName of Party to Pay Freight - If N101 = PFActual Carrier Name - If N101 = CA

N103 66 Identification Code Qualifier X ID 1/2

Code designating the system/method of code structure used for Identification Code (67)

2 Standard Carrier Alpha Code (SCAC)

9 D-U-N-S+4, D-U-N-S Number with Four Character

S940 (004010) 7 November 19, 1998

Suffix

Assigned by Seller or Seller's Agent

N104 Identification Code X

Code identifying a party or other code

DUNS + 4 - If N103 = 9

SCAC (Carrier Code) - If N103 = 2

Omit SCAC if agent acts as carrier.

N105 706 O ID 2/2


X N106 98 Entity Identifier Code O ID 2/3

Code identifying an organizational entity, a physical location, property or an individual


S940 (004010) 8 November 19, 1998

Segment: N2 Additional Name Information

Position:Loop: 0100 Optional

HeadingUsage:

Max Use: 2Purpose:

Syntax Notes:Semantic Notes:

Comments:Notes: This segment can be used to specify additional Ship To name such as DBA name.

This is an optional segment.It is currently only defined on the Ship To loop.


>> N201 93 Name M AN 1/60

Free-form name

N202 93 Name O AN 1/60

Free-form name

S940 (004010) 9 November 19, 1998

Segment: Address Information

060Loop:

Level: HeadingOptional

Max Use:Purpose: To specify the location of the named party

Semantic Notes:Comments:

This segment is defined as optional on the Warehouse loop.This segment is currently defined on the Warehouse, Ship To and Party to Pay Freight loops.


>> N301 166 Address Information M AN 1/55

Address information

N302 166 Address Information O AN 1/55

Address information

S940 (004010) 10 November 19, 1998

Segment: N4 Geographic Location

Position:Loop: 0100 Optional

HeadingUsage:

Max Use: 1To specify the geographic place of the named party

Syntax Notes: If N406 is present, then N405 is required.Semantic Notes:

1 A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.

2 N402 is required only if city name (N401) is in the U.S. or Canada.Notes: This segment is defined as optional on the Warehouse loop.

This segment is currently defined on the Warehouse, Ship To and Party to Pay Freight loops.

Data Element SummaryRef. DataDes. Element Name AttributesN401 19 City Name O AN 2/30

Free-form text for city name

N402 156 State or Province Code O ID 2/2

Code (Standard State/Province) as defined by appropriate government agency

N403 116 Postal Code O ID 3/15

Code defining international postal zone code excluding punctuation and blanks (zip code for United States)

N404 26 Country Code O ID 2/3

Code identifying the country

X N405 309 Location Qualifier X ID 1/2

Code identifying type of location


X N406 310 Location Identifier O AN 1/30

Code which identifies a specific location

S940 (004010) 11 November 19, 1998

Segment: N9 Reference Identification

Position:Loop:

Level:Usage: Optional

10Purpose:

QualifierSyntax Notes: At least one of N902 or N903 is required.

23 If either C04003 or C04004 is present, then the other is required.

If either C04005 or C04006 is present, then the other is required.Semantic Notes: 1 N906 reflects the time zone which the time reflects.

2 N907 contains data relating to the value cited in N902.Comments:


>> N901 128 Reference Identification Qualifier M ID 2/3

Code qualifying the Reference Identification

42 Phone Calls

CT Contract Number

FN Forwarder's/Agent's Reference Number

OS Outbound-from Party

RC Rail Routing Code

ZZ Mutually Defined

Rail Message

N902 127 Reference Identification X AN 1/30

Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier

X N903 369 Free-form Description X AN 1/45

Free-form descriptive text

X N904 373 Date O DT 8/8

Date expressed as CCYYMMDD

X N905 337 Time X TM 4/8

Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)

X N906 623 Time Code O ID 2/2

Code identifying the time. In accordance with International Standards

S940 (004010) 12 November 19, 1998

Organization standard 8601, time can be specified by a + or - and an indication in hours in relation to Universal Time Coordinate (UTC) time;

codes that follow

Refer to Data Element Dictionary for acceptable code values.

X C040 Reference Identifier

To identify one or more reference numbers or identification numbers as specified by the Reference Qualifier

C04001 128 M ID 2/3


C04002 127 M AN 1/30

specified by the Reference Identification Qualifier

X 128 Reference Identification Qualifier ID 2/3



C04004 127 X AN 1/30


X 128 Reference Identification Qualifier ID 2/3



C04006 127 X AN 1/30


S940 004010) November 19, 1998

Segment: G61 Contact

Position: 100Loop:


Max Use: 3Purpose: To identify a person or office to whom communications should be directed

Syntax Notes: 1 If either G6103 or G6104 is present, then the other is required.Semantic Notes:

1 G6103 qualifies G6104.

Ref. DataElement Name

>> G6101 Contact Function Code M

Code identifying the major duty or responsibility of the person or group named

Delivery Contact

EM

At Manufacturer

SU

Manufacturer Contact

>> 93 Name AN 1/60

Free-form name

G6103 Communication Number Qualifier X

Code identifying the type of communication number

TE

G6104 364 X AN 1/80

applicable

Phone Number

G6105 443 O AN 1/20

S940 ( ) 14

Segment: G62 Date/Time

Position: 110Loop:


Max Use: 10Purpose: To specify pertinent dates and times

Syntax Notes: 1 At least one of G6201 or G6203 is required.2 If either G6201 or G6202 is present, then the other is required.3 If either G6203 or G6204 is present, then the other is required.



G6201 432 Date Qualifier X ID 2/2

Code specifying type of date

02 Delivery Requested on This Date

10 Requested Ship Date/Pick-up Date

17 Estimated Delivery Date

18 Date Available/Constructive Replacement

39 Ship Week Of Date

55 Deliver Week Of

69 Scheduled Pick-Up Date

70 Scheduled Delivery Date

G6202 373 Date X DT 8/8


G6203 176 Time Qualifier X ID 1/2

Code specifying the reported time

3 Delivery Appointment Scheduled Time

L Latest Requested Delivery Time

U Scheduled Pick Up Time

G6204 337 Time X TM 4/8


HHMMSS

X G6205 623 Time Code O ID 2/2

Code identifying the time. In accordance with International Standards

S940 (004010) 15 November 19, 1998

Organization standard 8601, time can be specified by a + or - and an indication in hours in relation to Universal Time Coordinate (UTC) time; since + is a restricted character, + and - are substituted by P and M in the

Refer to 004010

S940 ( ) 16

Segment: NTE Note/Special Instruction

Position:Loop:

Level:Usage: Optional

>1Purpose:

instructionSyntax Notes:

Comments: 1standard implementations, is not machine processable. The use of the NTE segment should therefore be avoided, if at all possible, in an automated

Notes: Text identified as BOL or TRA is to be printed on the bill of lading.Text identified as INT or CHG is intended as warehouse information only.


NTE01 363 O ID 3/3

BOL Bill of Lading Note

Change

INT

LOI Loading Instructions

Transportation

ZZZ

>> NTE02 Description M

A free-form description to clarify the related data elements and their content

(004010 17 November 19, 1998

Segment: Equipment and Temperature

130Loop:

HeadingUsage:

Max Use: 1To relate equipment type and required temperatures

Syntax Notes: If either W0902 or W0903 is present, then the other is required.2

Semantic Notes: 1qualifying temperature scale is specified in W0903).

2 W0904 is the maximum allowable temperature condition for shipment; (the qualifying temperature scale is specified in W0905).W0906 is used to describe the environment required within an ocean-type, refrigerated container when other than normal air is required.

4 W0908 is the humidity percentage.W0909 is the number of air exchanges per hour.

Comments:


>> W0901 Equipment Description Code M

Code identifying type of equipment used for shipment

BR Barge

Rail Car

TV

VT Vessel, Ocean, Containership

W0902 408 X R 1/4

X W0903 Unit or Basis for Measurement Code X

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken


X 408 Temperature R 1/4

Temperature

W0905 355 X ID 2/2

in which a measurement has been taken


W0906 3 O AN 1/60

Description of equipment (ie. "Tank Truck")

S940 004010) November 19, 1998

X W0907 1122 Vent Setting Code O ID 1/1

Code describing the setting on the air vents on ocean-type containers


X W0908 488 Percent O N0 1/3

Percent expressed as 0 to 100

X W0909 380 Quantity O

Numeric value of quantity

S940 004010) November 19, 1998

Segment: W66 Warehouse Carrier Information

Position: 140Loop:


Max Use: 1Purpose: To specify transportation instructions relating to shipment

Syntax Notes: 1 If either W6608 or W6609 is present, then the other is required.Semantic Notes: W6609 is the monetary amount of the charges to be collected on delivery of

order.

Data Element SummaryRef.Des. Element Attributes

>> 146 Shipment Method of Payment ID 2/2

Code identifying payment terms for transportation charges

Collect

PP

TP Third Party Pay

W6602 91 M ID 1/2

A Air

Customer Pickup

M

O Containerized Ocean

Rail

S

(Non-containerized)

T

X Intermodal (Piggyback)

W6603 399 O ID 1/1

Refer to 004010

X W6604 Unit Load Option Code O

Code identifying loading or unloading a shipment


X 387 Routing AN 1/35

Free-form description of the routing or requested routing for shipment, or the originating carrier's identity

W6606 F.O.B. Point Code O

S940 ( ) 20

Code identifying type of F.O.B. point

02 Destination

04 Point of Origin

W6607 434 F.O.B. Point O AN 1/30

Descriptive name of F.O.B. point

X W6608 625 COD Method of Payment Code X ID 1/1

Code indicating method of payment acceptable for C.O.D. charge collection


X W6609 610 Amount X N2 1/15

Monetary amount

W6610 140 Standard Carrier Alpha Code O ID 2/4

Standard Carrier Alpha Code

Use "CPU" for customer pickup and "NRG" for non-registered carrier.

S940 (004010) 21 November 19, 1998

LX Position: 005

0300 OptionalLevel:Usage: Optional

1Purpose:


Data Element SummaryRef.Des. Element Attributes

>> 554 Assigned Number N0 1/6

Number assigned for differentiation within a transaction set

S940004010) November 19, 1998

Segment: W01 Line Item Detail - Warehouse


Level: DetailUsage: Optional

Max Use: 1Purpose: To transmit basic and most frequent shipment-related line-item data elements

Syntax Notes: 12 If either W0104 or W0105 is present, then the other is required.34 If either W0110 or W0111 is present, then the other is required.5


Multiple lot numbers are to be handled by repeating the W01 segment.

Data Element SummaryRef. Data

Element Name>> W0101 Quantity Ordered M

Quantity ordered

>> 355 Unit or Basis for Measurement Code M ID 2/2

in which a measurement has been taken

Any valid code


W0103 438 X AN 12/12

identifying the "system" (U.S. Grocery = 00, 06 or 07; U.S. Drug = 03); using the U.S. Grocery system, the next ten digits are: Manufacturer (5)

W0104 235 X ID 2/2

Product/Service ID (234)

MG

W0105 234 X AN 1/48

Product Code

W0106 Product/Service ID Qualifier X

Code identifying the type/source of the descriptive number used in Product/Service ID (234)

Buyer's Part Number

W0107 Product/Service ID X

Identifying number for a product or service

S940004010) November 19, 1998

Actual Part Number

W0108 59 Freight Class Code O AN 2/5

Code indicating generalized classification that applies to one or more items in the shipment, i.e., class 70, 77.5, etc.

X W0109 121 Rate Class Code O ID 1/3

Code identifying specifically designated class of goods; Note: For international air shipments, see IATA Resolution 600k


X 23 Commodity Code Qualifier ID 1/1

Code identifying the commodity coding system used for Commodity Code

Refer to 004010

X W0111 Commodity Code X

Code describing a commodity or group of commodities

X 416 Pallet Block and Tiers N0 6/6

Code indicating pallet and load structure; first three digits indicate the number of cases per layer, last three digits indicate the number of layers

W0113 451 O AN 1/12

W0114 286 O ID 2/2

01 Good

Damaged

ZZ

Quarantined

X 235 Product/Service ID Qualifier ID 2/2

Code identifying the type/source of the descriptive number used in Product/Service ID (234)


X 234 Product/Service ID AN 1/48

Identifying number for a product or service

(004010 24 November 19, 1998

Segment: G69 Line Item Detail - Description



Max Use: 5Purpose: To describe an item in free-form format


Comments:


>> G6901 369 Free-form Description M AN 1/45


Used for the product legal name and trademark.

S940 (004010) 25 November 19, 1998

Segment: Reference Identification

040Loop:

Level: DetailOptional

Max Use:Purpose: To transmit identifying information as specified by the Reference Identification

Syntax Notes: 12 If N906 is present, then N905 is required.

If either C04003 or C04004 is present, then the other is required.4 If either C04005 or C04006 is present, then the other is required.

Semantic Notes: 1 N906 reflects the time zone which the time reflects.2 N907 contains data relating to the value cited in N902.

Comments:


>> N901 128 Reference Identification Qualifier M ID 2/3


97 Package Number

A serial number indicating unit shipped

(Case Number)

CR Customer Reference Number

DP Department Number

(Buying Department)

HD Department of Transportation Hazardous Number

Character to print in HM column.

LA Shipping Label Serial Number

WHMIS

LI Line Item Identifier (Seller's)

MB Master Bill of Lading

OC Ocean Container Number

PG Product Group

PP Purchase Order Revision Number

Plant Number

QN Stop Sequence Number

QQ Unit Number

(Pallet Number)

SE Serial Number

Container Serial Number

S940 (004010) 26 November 19, 1998

SI Shipper's Identifying Number for Shipment (SID)

shipper to identify the shipment

UN

WS Warehouse storage location number

Mutually Defined

Free-form Product Description Text

127 Reference Identification AN 1/30

Reference information as defined for a particular Transaction Set or as

N903 369 X AN 1/45


(ie. Hazardous Material Description)

A qualifier of "HD" followed text of "X" indicates that the product is hazardous material.

X N904 373 Date O DT 8/8


X N905 337 Time X TM 4/8


X N906 623 Time Code O ID 2/2

Code identifying the time. In accordance with International Standards Organization standard 8601, time can be specified by a + or - and an indication in hours in relation to Universal Time Coordinate (UTC) time; since + is a restricted character, + and - are substituted by P and M in the codes that follow


X N907 C040 Reference Identifier O

To identify one or more reference numbers or identification numbers as specified by the Reference Qualifier

X C04001 128 Reference Identification Qualifier M ID 2/3



X C04002 127 Reference Identification M AN 1/30


X C04003 128 Reference Identification Qualifier X ID 2/3



X C04004 127 Reference Identification X AN 1/30

S940 (004010) 27 November 19, 1998


C04005 128 X ID 2/3

Refer to 004010

X C04006 Reference Identification X


(004010) 28 November 19, 1998

Segment: W20 Line-Item Detail - Miscellaneous



Max Use: 3Purpose: To specify packing details of the items shipped

Syntax Notes: 1 If either W2002 or W2003 is present, then the other is required.2 If any of W2004 W2005 or W2006 is present, then all are required.3 If either W2008 or W2009 is present, then the other is required.



X W2001 356 Pack O N0 1/6

The number of inner containers, or number of eaches if there are no inner containers, per outer container

X W2002 357 Size X R 1/8

Size of supplier units in pack

X W2003 355 Unit or Basis for Measurement Code X ID 2/2



W2004 81 Weight X R 1/10

Numeric value of weight

Weight of Line Item

W2005 187 Weight Qualifier X ID 1/2

Code defining the type of weight

G Gross Weight

(does not include pallet weight)

N Actual Net Weight

(for bulk, product weight only)

W2006 188 Weight Unit Code X ID 1/1

Code specifying the weight unit

(any valid code)

X 395 Unit Weight O R 1/8

Numeric value of weight per unit

183 Volume X R 1/8

Value of volumetric measure

X W2009 355 X ID 2/2

(004010



X W2010 397 Color O AN 1/10

Free-form description of color

S940 (004010) 30 November 19, 1998

Segment: W76 Total Shipping Order

Position: 010Loop:

Level: SummaryUsage: Optional

Max Use: 1Purpose: To specify summary details of total items shipped in terms of quantity, weight, and

volumeSyntax Notes: 1 If either W7602 or W7603 is present, then the other is required.

2 If either W7604 or W7605 is present, then the other is required.3 If W7606 is present, then W7603 is required.

Semantic Notes:Comments: 1 Quantity ordered (W7601) is a hash total and the unit of measure is not required.


>> W7601 330 Quantity Ordered M R 1/15

Quantity ordered

Total Number of Pieces on Order

W7602 81 Weight X R 1/10

Numeric value of weight

Total Weight of the weights on the W20 segments

W7603 355 Unit or Basis for Measurement Code X ID 2/2


(any valid code)

X W7604 183 Volume X R 1/8

Value of volumetric measure

X W7605 355 Unit or Basis for Measurement Code X ID 2/2



X W7606 398 Order Sizing Factor O R 1/10

A product specification other than gross or net weight, or cubic feet for a line item or transaction used for order sizing and pricing purposes

S940 (004010) 31 November 19, 1998

SE Position: 020

Level: SummaryMandatory

Max Use:Purpose: To indicate the end of the transaction set and provide the count of the transmitted


1 SE is the last segment of each transaction set.

Ref. DataElement Name Attributes

SE01 96 M N0 1/10

Total number of segments included in a transaction set including ST and SE segments

SE02 329 M AN 4/9

functional group assigned by the originator for a transaction set

S940 004010) November 19, 1998

Documents

940 Warehouse Shipping Order Functional Group ID= OWs3.amazonaws.com/aggateway_public/AgGatewayWeb/eConnectivity/EDI/s... · 940 Warehouse Shipping Order Functional Group ID= OW Introduction: