Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
8-Port GigabitSwitchSE4008
USER GUIDE
WRT 8-PORT GIGABIT SWITCH | Contents
Contents
Product OverviewSE4008 1
LEDs 1
Ports 1
Buttons 1
Setting Up: BasicsInstall Your Switch 2
SpecificationsLinksys SE4008 3
WRT 8-PORT GIGABIT SWITCH | Product Overview 1
LEDS
The system LED is solid when the switch is powered on.
Ethernet 1 thru 8 (Primary)Numbered LEDs correspond to the numbered ports on the switch's back panel. If the LED is solid, a device is connected to that port. A flashing LED indicates network activity over that port.Ethernet 1 thru 8 (Secondary)If the LED is not on, a device is connected to that port at 10/100 Mbps. A solid LED indicates that a device is successfully connected to that port at 1000 Mbps (Gigabit Ethernet).
PORTSEthernetConnect Ethernet cables to Gigabit 10/100/1000 ports to add wired devices to your network.
PowerConnect the included AC power adapter.
BUTTONSPower Switch (European model)Toggle to power on/off the switch.
LED On/Off ButtonPress to enable/disable the Ethernet primary and secondary LEDs.
SE4008
Front View
Back View
Product Overview
ETHERNET Secondary Indiators
ETHERNET Primary Indiators
LED ButtonPower Port
Power SwitchEthernet Ports
INSTALL YOUR SWITCH1. Connect the power adapter to your switch and an electrical
outlet. Toggle the power switch to the | (On) position (Europe only).
2. Connect your router to any port on the switch with an Ethernet cable.
3. Connect your wired devices to the switch with Ethernet cables. You may use any of the remaining seven Ethernet ports.
Get help Internet: linksys.com/support or Twitter: @LinksysCares
WRT 8-PORT GIGABIT SWITCH | Setting Up: Basics 2
Setting Up: Basics
4 3 2 1
Power
ETHERNET
REINITRESET
INTERNETUSB2
USB1
4 3 2 1
Power
ETHERNET
REINITRESET
INTERNETUSB2
USB1
WRT 8-PORT GIGABIT SWITCH | Specifications 3
Linksys SE4008
Model Name Linksys SE4008
Description WRT 8-Port Gigabit Switch
Standards IEEE802 3, 802 3u, 802 3x, 802 3ab, 802 3az
Ports 8 RJ-45 10/100/1000 Mbps ports
Cabling Type Cat5 or better Ethernet cable
LEDs System LED: 1 Link/Activity LED: 8 Speed LED: 8
Dimensions 246 x 194 x 62 mm (WxDxH)
Unit Weight 602 g
Power 12V, 1A
Certification FCC Class B, IC, CE
Operating Temperature 32 to 104ºF(0 to 40ºC)
Storage Temperature -4 to 158ºF(-20 to 70ºC)
Operating Humidity 10 to 90%, non-condensing
Storage Humidity 5 to 90%, non-condensing
Specifications
LNKPG-00158 Rev. A01
Visit linksys.com/support for award-winning technical support
BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners.© 2014 Belkin International, Inc. and/or its affiliates. All rights reserved.