7.1.1 Tubing and Pipe Table of Contents · 2014-11-06 · 7.1.1 Introduction, Part Number Matrix Tubing and Pipe Overview: Partek/Atlantic manufactures an extensive line of high quality

Introduction ....................................................................................................................................................... 3

Part Number Matrix ........................................................................................................................................... 3

HP PFA ProductsIntroduction ............................................................................................................................................. 4Fractional Size Tubing .............................................................................................................................. 5Metric Size Tubing ................................................................................................................................... 5Retractable Coils ..................................................................................................................................... 6Schedule 40 Pipe .................................................................................................................................... 6General Information ................................................................................................................................. 7

PFA ProductsIntroduction ............................................................................................................................................. 8Fractional Size Tubing .............................................................................................................................. 9Metric Size Tubing ................................................................................................................................... 10Convoluted Tubing ................................................................................................................................... 10Retractable Coils ..................................................................................................................................... 11Schedule 40 Pipe .................................................................................................................................... 11General Information ................................................................................................................................. 12

FEP ProductsIntroduction ............................................................................................................................................. 13Fractional Size Tubing .............................................................................................................................. 14Metric Size Tubing ................................................................................................................................... 15AWG Spaghetti Tubing ............................................................................................................................. 15Convoluted Tubing ................................................................................................................................... 16Fractional Heat Shrink Tubing (1.3:1) ....................................................................................................... 16AWG Heat Shrink Tubing (1.3:1) .............................................................................................................. 17Schedule 40 Pipe .................................................................................................................................... 17Retractable Coils ..................................................................................................................................... 18General Information ................................................................................................................................. 19

PTFE ProductsIntroduction ............................................................................................................................................. 20Fractional Size Tubing .............................................................................................................................. 21Metric Size Tubing ................................................................................................................................... 22Fractional Spaghetti Size Tubing .............................................................................................................. 22AWG Spaghetti Tubing ............................................................................................................................. 23Heat Shrink Tubing (2:1) .......................................................................................................................... 24Convoluted Tubing ................................................................................................................................... 27Spiral Cut Cable Wrap ............................................................................................................................. 28Round Beading/Miniature Rod ................................................................................................................. 29General Information ................................................................................................................................. 29

MFA ProductsIntroduction ............................................................................................................................................. 30Fractional Size Tubing .............................................................................................................................. 31General Information ................................................................................................................................. 32

ETFE ProductsIntroduction ............................................................................................................................................. 33Fractional Size Tubing .............................................................................................................................. 34General Information ................................................................................................................................. 35

7.1.1

Table of ContentsTubing and Pipe

Parker Hannifin CorporationPartek/AtlanticChestnut Ridge, NY

PVDF ProductsIntroduction ............................................................................................................................................. 36Fractional Size Tubing .............................................................................................................................. 37Metric Size Tubing ................................................................................................................................... 37Schedule 40 Pipe .................................................................................................................................... 38General Information ................................................................................................................................. 38

Offer of Sale ....................................................................................................................................................... 39

7.1.1

Table of ContentsTubing and Pipe


FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONALINJURY AND PROPERTY DAMAGE.

This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation byusers having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current productcatalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making thefinal selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.

The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporationand its subsidiaries at any time without notice.

WARNING

© Copyright 2000, Parker Hannifin Corporation, All Rights Reserved

The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance aregoverned by the provisions stated in the “Offer of Sale”.

Offer of Sale

Rev. 12/00

7.1.1

Introduction, Part Number MatrixTubing and Pipe

Overview:

Partek/Atlantic manufactures an extensive line of highquality Fluoropolymer tubing and pipe. A wide range ofproducts are available in PTFE, FEP, PFA, High PurityPFA, PVDF, and ETFE. Other materials such as PEEKand MFA are also available on request. All tubing andpipe products are made from 100% virgin resins.


3

105-0250062-N40025

Product Family1 = Fractional2 = Metric3 = Convoluted4 = Spiral Cut5 = Pipe6 = Melt Rod7 = Coiled Tubing8 = PTFE Beading9 = CustomA = Formed Part

Resin01 = PTFE02 = PTFE, Hose03 = FEP04 = PFA05 = PFA, HP Generic06 =PFA, Teflon® 450HP07 = PFA, Teflon® 440HP08 = PFA, UHP09 = MFA10 = PVDF11 = PVDF, Superflex12 = ETFE13 = PEEK14 = PTFE, Opaque

Length1000 = 1,000 ft.0500 = 500 ft.0250 = 250 ft.0100 = 100 ft.0050 = 50 ft.0025 = 25 ft.0010 = 10 ft.0005 = 5 ft.0004 = 4 ft. R = Random C = Custom

Add addtional suffix forSpiral cut tubing:

R = Right hand cut L = Left hand cut

Outside DiameterExample:0250 = .250 Inches0700 = 7 mm

Wall ThicknessExample:062 = .062 Inches100 = 1 mm

Packaging1 = HP Spool2 = Plastic Spool3 = Wood Spool4 = Coil5 = Straight6 = Cardboard Spool0 = Other

Part Number Matrix

Color0 = Black1 = Brown2 = Red3 = Orange4 = Yellow5 = Green6 = Blue7 = Violet8 = Gray9 = WhiteN = Natural

Teflon® is a registered trademark of DuPont.

Consult Price List for individual configuration pricing. For other configurations not listed on PriceList, please consult factory.

7.1.1

Introduction, HP PFA Tubing and PipeTubing and Pipe

4

Features:

100% virgin PFA resinused on all products.

Semiconductor andpharmaceuticalspecificationconformance.

Translucent and flexiblematerials.

Chemically inert tonearly all industrialchemicals and solvents.

Smooth nonsticksurface resulting in thelowest coefficient offriction.

Lowest levels ofextractables.

Nonflammablematerials.

FDA Compliant.

Benefits:

No processcontamination.

High Purity applications.

Excellent for flowmonitoring systems.

Longer product life andless downtime.

Higher flow with noprocess contamination.

Excellent for high purityapplications.

Safety.

Useful in foodapplications.

Specifications:

Materials:

Products in this catalog are manufactured using resinscomplying with ASTM D 3307 Type II Specification.

Flammability:Listed VW-1 by the Underwriters’ Laboratories, Inc. in theirburning test classification for polymeric materials and passesthe UL 83 vertical flame test. In a flame situation, High PurityPFA tubing resists combustion and does not promote flamespread.

FDA Compliance:

Most high purity resins qualify for use in contact with food incompliance with FDA regulation 21 CFR 177.1550, 175.300,176.170, 176.180.

Pressure and Temperature Ranges:

-329° - 500° F (-200° -260° C) See pressure temperature chartfor more information.

Product Overview:

High Purity PFA (Perfluoroalkoxy) tubing, made from 100% virgin resin, has the highest molecular weight available.It is manufactured for use in hostile environments where purity is critical. Testing has proven that these High PurityPFA products are able to withstand corrosive surfactants for longer periods of time than the standard products. HighPurity PFA products are available in various sizes upon request.



7.1.1

HP PFA TubingTubing and Pipe

5

Working pressure calculated using a Safety Factor of 5. Please note that other manufacturers may use a SafetyFactor of 4 when presenting their data. High Purity PFA Industrial Wall Tubing is supplied in 25 ft. increments up to1000 ft. continuous for most sizes. Custom packaging and sizes are available upon request.

Metric Size Tubing

Fractional Size Tubing

Part numbers below are for standard configurations. For complete part numbers and options for material, color,packaging, etc. refer to Part Number Matrix on page 2.

"8/1 XXXXXX-1305210-501 130.X"61/1X"8/1 521. 400.-/+ 300.-/+ )4.52(963 )2.821(958,1

"61/3 XXXXXX-1308810-501XXXXXX-2608810-501

130.X"8/1X"61/3260.X"61/1X"61/3

881. 500.-/+ 300.-/+)1.71(942)9.33(294

)4.68(352,1)9.071(874,2

"4/1XXXXXX-1300520-501XXXXXX-7400520-501XXXXXX-2600520-501

130.X"61/3X"4/1740.X"23/5X"4/1

260.X"8/1X"4/1052. 500.-/+ 300.-/+

)1.31(091)7.91(682)2.62(083

)2.56(549)5.99(344,1)2.031(988,1

"8/3 XXXXXX-1305730-501XXXXXX-2605730-501

130.X"61/5X"8/3260.X"4/1X"8/3

573. 500.-/+ 300.-/+)6.8(521)9.71(062

)6.34336)3.88(082,1

"2/1 XXXXXX-1300050-501XXXXXX-2600050-501

130.X"61/7X"2/1260.X"8/3X"2/1

005.600.-/+500.-/+

300.-/+)6.6(59

)4.31(591)8.23(674)7.66(869

"4/3 XXXXXX-1300570-501XXXXXX-2600570-501

130.X"61/11X"4/3260.X"8/5X"4/3

057. 600.-/+ 300.-/+)7.4(86)1.9(231

)9.12(813)8.44(056

"1 XXXXXX-2600001-501 260.X"8/7X"1 000.1 010.-/+ 300.-/+ )9.6(001 )8.33(094

"8/1-1 XXXXXX-2605211-501 260.X"1X"8/1-1 521.1 510.-/+ 300.-/+ )0.6(78 )1.03(634

"4/1-1 XXXXXX-5700521-501 570.X01.1X"4/1-1 052.1 510.-/+ 300.-/+ )5.6(49 )7.23(474

3 XXXXXX-0010030-502 0.1X0.3 930.X811. 11.-/+ 400.-/+

4 XXXXXX-0010040-502 0.2X0.4 870.X751. 11.-/+ 400.-/+

5 XXXXXX-0010050-502 0.3X0.5 811X791. 11.-/+ 400.-/+

6 XXXXXX-0010060-502 0.4X0.6 751.X632. 31.-/+ 500.-/+

7 XXXXXX-0010070-502 0.5X0.7 791.X672. 31.-/+ 500.-/+

8 XXXXXX-0010080-502 0.6X0.8 632.X513. 31.-/+ 500.-/+

9 XXXXXX-0010090-502 0.7X0.9 672.X453. 31.-/+ 500.-/+

01 XXXXXX-0010001-502 0.8X0.01 513.X393. 31.-/+ 500.-/+

21 XXXXXX-0010021-502 0.01X0.21 393.X274. 51.-/+ 600.-/+

41 XXXXXX-0010041-502 0.21X0.41 274.X155. 51.-/+ 600.-/+

61 XXXXXX-0010061-502 0.41X0.61 155.X036. 51.-/+ 600.-/+

.D.O rebmuNtraPllaWX.D.IX.D.O

ssenkcihTlanimoN

.D.O.D.O

ecnareloTllaW

ecnareloT

gnikroWerusserP

)rab(GISP

tsruBerusserP

)rab(GISP

.D.O rebmuNtraP.D.IX.D.O

mm.D.IX.D.O

hcnI

.D.I/.D.OecnareloT

mm

.D.I/.D.OecnareloT

hcnI

7.1.1

HP PFA Retractable Coils and PipeTubing and Pipe

6 Parker Hannifin CorporationPartek/AtlanticChestnut Ridge, NY

All pipe is supplied in 5 and 10 foot lengths as standard. Custom packaging, lengths, and schedule 80 pipe areavailable upon request. Please consult factory.

Schedule 40 PipeStandard left/right tail length is 6 inches. Please consult factory for special tail lengths.

Retractable Coils

XX-2608810-507 3000 "61/1X"61/3 057. )1.91( 3 )67( 21 )503(

X-2608810-507 6000X "61/1X"61/3 057. )1.91( 6 )251( 42 )016(

X-2608810-507 2100X "61/1X"61/3 057. )1.91( 21 )503( 84 )9121(

X-2608810-507 8100X "61/1X"61/3 057. )1.91( 81 )754( 27 )9281(

X-2600520-507 3000X 4/1 " "8/1X 00.1 )4.52( 3 )67( 21 )503(

X-2600520-507 6000X 4/1 " "8/1X 00.1 )4.52( 6 )251( 42 )016(

X-2600520-507 2100X 4/1 " "8/1X 00.1 )4.52( 21 )503( 84 )9121(

X-2600520-507 8100X 4/1 " "8/1X 00.1 )4.52( 81 )754( 27 )9281(

X-2603130-507 3000X 61/5 " "61/3X 526.1 )3.14( 3 )67( 21 )503(

X-2603130-507 6000X 61/5 " "61/3X 526.1 )3.14( 6 )251( 42 )016(

X-2603130-507 2100X 61/5 " "61/3X 526.1 )3.14( 21 )503( 84 )9121(

X-2603130-507 8100X 61/5 " "61/3X 526.1 )3.14( 81 )754( 27 )9281(

X-2605730-507 3000X 8/3 " "4/1X 526.1 )3.14( 3 )67( 21 )503(

X-2605730-507 6000X 8/3 " "4/1X 526.1 )3.14( 6 )251( 42 )016(

X-2605730-507 2100X 8/3 " "4/1X 526.1 )3.14( 21 )503( 84 )9121(

X-2605730-507 5100X 8/3 " "4/1X 526.1 )3.14( 51 )183( 06 )4251(

X-2605730-507 8100X 8/3 " "4/1X 526.1 )3.14( 81 )754( 27 )9281(

X-2608340-507 3000X 61/7 " "61/5X 00.3 )2.67( 3 )67( 21 )503(

X-2608340-507 6000X 61/7 " "61/5X 00.3 )2.67( 6 )251( 42 )016(

X-2608340-507 2100X 61/7 " "61/5X 00.3 )2.67( 21 )503( 84 )9121(

X-2600050-507 3000X "8/3X"2/1 00.3 )2.67( 3 )67( 21 )503(

X-2600050-507 6000X "8/3X"2/1 00.3 )2.67( 6 )251( 42 )016(

X-2600050-507 2100X "8/3X"2/1 00.3 )2.67( 21 )503( 84 )9121(

RightLength

ALeft

Length

XXXXXX-8800450-705 "4/1 045. 880. 010.-/+ 00.-/020.+

XXXXXX-9010480-705 "2/1 048. 901. 010.-/+ 00.-/020.+

XXXXXX-3110501-705 "4/3 050.1 311. 010.-/+ 00.-/020.+

XXXXXX-3315131-705 "1 513.1 331. 510.-/+ 00.-/020.+

XXXXXX-4515732-705 "2 573.2 451. 510.-/+ 00.-/020.+

rebmuNtraP .D.IX.D.OgnibuT.D.IlioC)mm(hcnI

htgneLdetcarteR"A"

)mm(hcnI

htgneLdednetxE)mm(hcnI

rebmuNtraP eziShcnIlanimoN.D.OlautcA

hcnIllaWmuminiM

hcnIecnareloT.D.O

hcnIecnareloTllaW

hcnI

7.1.1

HP PFA General InformationTubing and Pipe


.062 wall

.062 wall

.062 wall

.047 wall

.047 wall

.062 wall

.062 wall

350

250

150

50

24.13

17.24

10.34

3.45

12165 176

0

300

400

200

100

27.58

20.68

Fractional SizeStandard Wall High Purity PFA Tubing

Pressure vs. Temperature Chart

1/4"

1"3/4"1/2"3/8"

Pre

ssur

e (b

ar)

Pre

ssur

e (P

SIG

)

6.90

13.79

Media Temperature (˚C)

2041499338

Media Temperature (˚F)

400350300250200150100

trahCsuidaRdneBgnibuTAFPytiruPhgiH

.D.O .D.IllaW

ssenkcihTdneBmuminiM

suidaR

8/1 " 61/1 " 30. 1 2/1 "

4/1 " 8/1 " 260. 2/1 "

4/1 " 23/5 " 740. 4/3 "

4/1 " 61/3 " 30. 1 1"

8/3 " 4/1 " 260. 4/3 "

8/3 " 61/5 " 30. 1 "2/1-2

2/1 " 8/3 " 260. 2/1-2 "

2/1 " 61/7 " 30. 1 4"

/5 "8 2/1 " 260. 3"

8/5 " 61/9 " 30. 1 21 "

4/3 " 8/5 " 260. 6"

4/3 " "61/11 30. 1 61 "

8/7 " 4/3 " 260. 21 "

1" 8/7 " 260. 61 "

-1 1 "4/ 01.1 570. 61 "

7.1.1

Introduction, PFA Tubing and PipeTubing and Pipe

8

Features:

100% virgin PFA resinused on all products.

Translucent and flexiblematerials.



Low permeability.


FDA Compliant.

Weather resistant.

Benefits:


Excellent for flowmonitoring systems.


Higher flow with noprocess contamination.

Useful in severechemical and gasservice.

Safety.


Excellent for outdooruse in extremeconditions.

Specifications:

Materials:

Products in this catalog are manufactured using resinscomplying with ASTM D 3307 Type II Specification.

Flammability:

Listed VW-1 by the Underwriters’ Laboratories, Inc. in theirburning test classification for polymeric materials and passesthe UL 83 vertical flame test. In a flame situation, PFA tubingresists combustion and does not promote flame spread.

FDA Compliance:

Most PFA resins qualify for use in contact with food incompliance with FDA regulation 21 CFR 177.1550, 175.300,176.170, 176.180.

Pressure and Temperature Ranges:

-329° - 500° F (-200° -260° C) See pressure temperature chartfor more information.

Product Overview:

Partek/Atlantic’s line of Fluoropolymer tubing is well suited for any corrosive or high purity application. PFA TubingProducts are available in several grades and sizes, and are offered in numerous lengths. PFA (Perfluoroalkoxy) is thematerial of choice in applications requiring excellent chemical resistance, high temperature exposure, clarity and longcontinuous lengths. Atlantic’s resin is a standard grade with a high molecular weight and high resistance to stresscracking. The tubing can be used with flare or conventional fittings, and is available in a wide range of sizes. Schedule40 Pipe is also available.



7.1.1

PFA TubingTubing and Pipe

9

Working pressure calculated using a Safety Factor of 5. Please note that other manufacturers may use a SafetyFactor of 4 when presenting their data. PFA Industrial Wall Tubing is supplied in 25 foot increments up to 1,000 feetcontinuous for most sizes. Custom packaging and sizes are available upon request.




ssenkcihTlanimoN

.D.O.D.O

ecnareloTllaW

ecnareloT

gnikroWerusserP

)rab(GISP

tsruBerusserP

)rab(GISP

"23/3 XXXXXX-1304900-401 130.X"23/1X"23/3 490. 400.-/+ 300.-/+ )6.33(784 )1.961(354,2

"8/1 XXXXXX-1305210-401 130.X"61/1X"8/1 521. 400.-/+ 300.-/+ )4.52(963 )2.821(958,1

"23/5 XXXXXX-1306510-401 130.x"23/3X"23/5 751. 500.-/+ 300.-/+ )5.02(792 )2.301(794,1

"61/3 XXXXXX-1308810-401XXXXXX-2608810-401

130.X"8/1X"61/3260.X"61/1X"61/3

881. 500.-/+ 300.-/+)1.71(942)9.33(294

)4.68(352,1)9.071(874,2


130.X"61/3X"4/1740.X"23/5X"4/1

260.X"8/1X"4/1052. 500.-/+ 300.-/+

)1.31(091)7.91(682)2.62(083

)2.56(549)5.99(344,1)2.031(988,1

"61/5 XXXXXX-1303130-401XXXXXX-2603130-401

130.X"4/1X"61/5260.X"61/3X"61/5

313. 500.-/+ 300.-/+)4.01(051)9.02(303

)3.25(857)2.501(525,1

"8/3 XXXXXX-1305730-401XXXXXX-2605730-401

130.X"61/5X"8/3260.X"4/1X"8/3

573. 500.-/+ 300.-/+)6.8(521)9.71(062

)6.34(336)3.88(082,1

"61/7 XXXXXX-1308340-401XXXXXX-2608340-401

130.X"8/3X"61/7260.X"61/5X"61/7

834. 500.-/+ 300.-/+)4.7(801)1.51(912

)5.73(345)0.67(201,1

"2/1 XXXXXX-1300050-401XXXXXX-2600050-401

130.X"61/7X"2/1260.X"8/3X"2/1

005.600.-/+500.-/+

300.-/+)6.6(59

)4.31(591)8.23(674)7.66(869

"61/9 XXXXXX-1302650-401XXXXXX-2602650-401

130.x"2/1x"61/9260.x"61/7x"61/9

265. 600.-/+ 300.-/+)8.5(48

)8.11(171)2.92(424)5.95(268

"8/5 XXXXXX-1305260-401XXXXXX-2605260-401

130.X"61/9X"8/5260.X"2/1X"8/5

526. 600.-/+ 300.-/+)2.5(57

)0.11(061)7.62(183)6.35(877

"61/11 XXXXXX-1308860-401XXXXXX-2608860-401

130.X"8/5X"61/11260.X"61/9X"61/11

886. 600.-/+ 300.-/+)7.4(96)7.9(141

)9.32(743)8.84(807

"4/3 XXXXXX-1300570-401XXXXXX-2600570-401

130.X"61/11X"4/3260.X"8/5X"4/3

057. 600.-/+ 300.-/+)7.4(86)1.9(231

)9.12(813)8.44(056

038. XXXXXX-0400380-401 040.X"4/3X038. 038. 600.-/+ 300.-/+ )2.5(67 )3.62(183

"8/7 XXXXXX-2605780-401 260.x"4/3X"8/7 578. 700.-/+ 300.-/+ )7.7(211 )5.83(955

569. XXXXXX-5405690-401 540.X"8/7X569. 569. 700.-/+ 300.-/+ )1.5(37 )5.52(963

"1 XXXXXX-2600001-401 260.X"8/7X"1 000.1 010.-/+ 300.-/+ )9.6(001 )8.33(094

01.1 XXXXXX-0500011-401 050.X"1X01.1 001.1 700.-/+ 400.-/+ )0.4(85 )3.02(492

"8/1-1 XXXXXX-2605211-401 260.X"1X"8/1-1 521.1 510.-/+ 400.-/+ )0.6(78 )1.03(634

502.1 XXXXXX-0405021-401 040.X"8/1-1X502.1 502.1 510.-/+ 400.-/+ )6.3(25 )2.81(462

"4/1-1 XXXXXX-2600521-401 260.X"8/1-1X"4/1-1 052.1 510.-/+ 400.-/+ )4.5(87 )1.72(393

033.1 XXXXXX-0400331-401 040.X"4/1-1X033.1 033.1 510.-/+ 400.-/+ )3.3(74 )5.61(932

"8/3-1 XXXXXX-26005731-401 260.X"4/1-1X"8/3-1 573.1 510.-/+ 400.-/+ )9.4(17 )6.42(753

085.1 XXXXXX-0400851-401 040.X"2/1-1X085.1 085.1 510.-/+ 400.-/+ )8.2(04 )9.31(102

"8/1-2 XXXXXX-2605212-401 260.X"2X"8/1-2 521.2 510.-/+ 400.-/+ )2.3(64 )0.61(232


7.1.1

PFA Tubing and Convoluted TubingTubing and Pipe

10

PFA Convoluted Tubing is made to order. Custom sizes, colors, packaging, and PTFE liners may also be available.Please consult factory.

Metric Size Tubing

Convoluted Tubing

CE

DBA

XXXXXX-5100230-403 181.X023. 510. 082. "4/3

XXXXXX-5014140-403 372.X414. 501. 243. "1

XXXXXX-0200540-403 303.X054. 020. 514. "1

XXXXXX-2020950-403 524.X095. 202. 045. "1

XXXXXX-5200660-403 584.X066. 520. 576. "4/1-1

XXXXXX-5020870-403 806.X087. 502. 008. "2/1-1

XXXXXX-0300011-403 058.X001.1 030. 060.1 "2

3 XXXXXX-0010030-402 0.1X0.3 930.X811. 11.-/+ 400.-/+

4 XXXXXX-0010040-402 0.2X0.4 870.X751. 11.-/+ 400.-/+

5 XXXXXX-0010050-402 0.3X0.5 811X791. 11.-/+ 400.-/+

6 XXXXXX-0010060-402 0.4X0.6 751.X632. 31.-/+ 500.-/+

7 XXXXXX-0010070-402 0.5X0.7 791.X672. 31.-/+ 500.-/+

8 XXXXXX-0010080-402 0.6X0.8 632.X513. 31.-/+ 500.-/+

9 XXXXXX-0010090-402 0.7X0.9 672.X453. 31.-/+ 500.-/+

01 XXXXXX-0010001-402 0.8X0.01 513.X393. 31.-/+ 500.-/+

21 XXXXXX-0010021-402 0.01X0.21 393.X274. 51.-/+ 600.-/+

41 XXXXXX-0010041-402 0.21X0.41 274.X155. 51.-/+ 600.-/+

61 XXXXXX-0010061-402 0.41X0.61 155.X036. 51.-/+ 600.-/+


mm.D.IX.D.O

hcnI

.D.I/.D.OecnareloT

mm

.D.I/.D.OecnareloT

hcnI

rebmuNtraP.D.IX.D.OgnibuT

"B"X"A"ssenkcihTllaW

"C".D.OffuC

"D"htgneLffuC

"E"

7.1.1

PFA Retractable Coils and PipeTubing and Pipe



Standard left/right cuff length is 6 inches. Please consult factory for special cuff lengths.

Retractable Coils

608810-407 3000XX-2 "61/1X"61/3 057. )1.91( 3 )67( 21 )503(

608810-407 6000XX-2 "61/1X"61/3 057. )1.91( 6 )251( 42 )016(

608810-407 2100XX-2 "61/1X"61/3 057. )1.91( 21 )503( 84 )9121(

2608810-407 8100XX- "61/1X"61/3 057. )1.91( 81 )754( 27 )9281(

2600520-407 3000XX- 4/1 " "8/1X 00.1 )4.52( 3 )67( 21 )503(

-2600520-407 X 6000X 4/1 " "8/1X 00.1 )4.52( 6 )251( 42 )016(

-2600520-407 2100XX 4/1 " "8/1X 00.1 )4.52( 21 )503( 84 )9121(

-2600520-407 8100XX 4/1 " "8/1X 00.1 )4.52( 81 )754( 27 )9281(

-2603130-407 000XX 3 61/5 " "61/3X 526.1 )3.14( 3 )67( 21 )503(

-2603130-407 6000XX 61/5 " "61/3X 526.1 )3.14( 6 )251( 42 )016(

-2603130-407 2100XX 61/5 " "61/3X 526.1 )3.14( 21 )503( 84 )9121(

-2603130-407 8100XX 61/5 " "61/3X 526.1 )3.14( 81 )754( 27 )9281(

30-407 3000XX-26057 8/3 " "4/1X 526.1 )3.14( 3 )67( 21 )503(

-2605730-407 6000XX 8/3 " "4/1X 526.1 )3.14( 6 )251( 42 )016(

-2605730-407 2100XX 8/3 " "4/1X 526.1 )3.14( 21 )503( 84 )9121(

-2605730-407 5100XX 8/3 " "4/1X 526.1 )3.14( 51 )183( 06 )4251(

-2605730-407 8100XX 8/3 " "4/1X 526.1 )3.14( 81 )754( 27 )9281(

-2608340-407 3000XX 61/7 " "61/5X 00.3 )2.67( 3 )67( 21 )503(

-2608340-407 6000XX 61/7 " "61/5X 00.3 )2.67( 6 )251( 42 )016(

-2608340-407 2100XX 61/7 " "61/5X 00.3 )2.67( 21 )503( 84 )9121(

-2600050-407 3000XX "8/3X"2/1 00.3 )2.67( 3 )67( 21 )503(

-2600050-407 6000XX "8/3X"2/1 00.3 )2.67( 6 )251( 42 )016(

-2600050-407 2100XX "8/3X"2/1 00.3 )2.67( 21 )503( )9121(

Schedule 40 Pipe

XXXXXX-8800450-405 "4/1 045. 880. 010.-/+ 00.-/020.+

XXXXXX-9010480-405 "2/1 048. 901. 010.-/+ 00.-/020.+

XXXXXX-3110501-405 "4/3 050.1 311. 010.-/+ 00.-/020.+

XXXXXX-3315131-405 "1 513.1 331. 510.-/+ 00.-/020.+

XXXXXX-4515732-405 "2 573.2 451. 510.-/+ 00.-/020.+

RightLength

ALeft

Length


htgneLdetcarteR"A"

)mm(hcnI



hcnIllaWmuminiM

hcnIecnareloT.D.O

hcnIecnareloTllaW

hcnI

7.1.1

PFA General InformationTubing and Pipe


.062 wall

.062 wall

.062 wall

.047 wall

.047 wall

.062 wall

.062 wall

350

250

150

50

24.13

17.24

10.34

3.45

12165 176

0

300

400

200

100

27.58

20.68

Fractional SizeStandard Wall PFA Tubing

Pressure vs. Temperature Chart

1/4"

1"3/4"1/2"3/8"

Pre

ssur

e (b

ar)

Pre

ssur

e (P

SIG

)

6.90

13.79

Media Temperature (˚C)

2041499338

Media Temperature (˚F)

400350300250200150100

trahCsuidaRdneBgnibuTAFP

.D.O .D.IllaW


suidaR

8/1 " 61/1 " 30. 1 2/1 "

4/1 " 8/1 " 260. 2/1 "

4/1 " 23/5 " 740. 4/3 "

4/1 " 61/3 " 30. 1 1"

"61/5 "61/3 260. "2/1

"61/5 "4/1 30. 1 "4/3-1

8/3 " 4/1 " 260. 1"

8/3 " 61/5 " 30. 1 "2/1-2

2/1 " 8/3 " 260. 2"

2/1 " 61/7 " 30. 1 4"

/5 "8 2/1 " 260. 3"

8/5 " 61/9 " 30. 1 2/1-5 "

4/3 " 8/5 " 260. 6"

4/3 " "61/11 30. 1 8"

8/7 " 4/3 " 260. 21 "

1" 8/7 " 260. 61 "


7.1.1

Introduction, FEP Tubing and PipeTubing and Pipe

13

Features:

100% virgin FEP resinused on all products.

Most translucentFluoropolymer available.


High abrasionresistance and thermalstability.

Low permeability.


FDA Compliant.

Benefits:

Highest qualityproducts.

Excellent for flowmonitoring applications.


Useful in applicationsrequiring thermalcycling.


Safety.


Specifications:

Materials:

FEP products in this catalog are manufactured using resinscomplying with ASTM D 3296-97 Specification.

Electrical insulation products conform to ASTM-D3295-97.Round Beading conforms to ASTM-D1710.FEP Heat Shrinkable Tubing conforms to Mil Spec DTL-23053/11.

Flammability:

Listed VW-1 by the Underwriters’ Laboratories, Inc. in theirburning test classification for polymeric materials and passesthe UL 83 vertical flame test. In a flame situation, FEP tubingresists combustion and does not promote flame spread.

FDA Compliance:

Most FEP resins qualify for use in contact with food incompliance with FDA regulation 21 CFR 177.1500, 177.520,177.2600, 176.180, 176.170, 175.300, 175.170, and 175.105.

Temperature Ranges:

-410° - 400° F (-246° -204° C)

Product Overview:

Partek/Atlantic’s line of FEP (Fluorinated Ethylene Propylene) tubing exhibits the highest clarity offered. This claritymakes this tubing ideal for flow monitoring applications. FEP also uses a high molecular weight resin that has thebest stress crack resistance. It is also widely used in water purification systems due to its excellent transmission ofUV light. FEP resin meets the FDA requirements for repeated food contact. The product is available in various sizesof tubing and pipe.


7.1.1

FEP TubingTubing and Pipe

14

Working pressure calculated using a Safety Factor of 5. Please note that other manufacturers may use a SafetyFactor of 4 when presenting their data. FEP Tubing through 1” O.D. is supplied in random length coils, with a minimumcoil length of 12 feet. Sizes over 1” O.D. are supplied in 5 or 10 foot straight lengths. Custom packaging and sizes areavailable upon request.




ssenkcihTlanimoN

.D.O.D.O

ecnareloTllaW

ecnareloT

gnikroWerusserP

)rab(GISP

tsruBerusserP

)rab(GISP

"23/3 XXXXXX-1304900-301 130.X"23/1X"23/3 490. 400.-/+ 300.-/+ )8.62(983 )3.531(269,1

"8/1 XXXXXX-1305210-301 130.X"61/1X"8/1 521. 400.-/+ 300.-/+ )3.02(592 )5.201(784,1

"23/5 XXXXXX-1306510-301 130.x"23/3X"23/5 751. 500.-/+ 300.-/+ )4.61(832 )6.28(791,1

"61/3 XXXXXX-1308810-301XXXXXX-2608810-301

130.X"8/1X"61/3260.X"61/1X"61/3

881. 500.-/+ 300.-/+)7.31(991)1.72(393

)1.96(200,1)7.631(389,1


130.X"61/3X"4/1740.X"23/5X"4/1

260.X"8/1X"4/1052. 500.-/+ 300.-/+

)3.01(051)8.51(922)7.02(003

)1.25(657)6.97(451,1)2.401(115,1

"61/5 XXXXXX-1303130-301XXXXXX-2603130-301

130.X"4/1X"61/5260.X"61/3X"61/5

313. 500.-/+ 300.-/+)3.8(021)7.61(242

)8.14(606)1.48(022,1

"8/3 XXXXXX-1305730-301XXXXXX-2605730-301

130.X"61/5X"8/3260.X"4/1X"8/3

573. 500.-/+ 300.-/+)9.6(001)5.41(012

)9.43(605)6.07(420,1

"61/7 XXXXXX-1308340-301XXXXXX-2608340-301

130.X"8/3X"61/7260.X"61/5X"61/7

834. 500.-/+ 300.-/+)9.5(68

)1.21(571)0.03(534)8.06(288

"2/1 XXXXXX-1300050-301XXXXXX-2600050-301

130.X"61/7X"2/1260.X"8/3X"2/1

005.600.-/+500.-/+

300.-/+)2.5(57

)0.11(061)3.62(183)4.35(477

"61/9 XXXXXX-1302650-301XXXXXX-2602650-301

130.x"2/1x"61/9260.x"61/7x"61/9

265. 600.-/+ 300.-/+)6.4(76)4.9(731

)4.32(933)6.74(096

"8/5 XXXXXX-1305260-301XXXXXX-2605260-301

130.X"61/9X"8/5260.X"2/1X"8/5

526. 600.-/+ 300.-/+)1.4(06)6.8(521

)0.12(503)9.24(226

"61/11 XXXXXX-1308860-301XXXXXX-2608860-301

130.X"8/5X"61/11260.X"61/9X"61/11

886. 600.-/+ 300.-/+)8.3(55)8.7(211

)1.91(872)1.93(765

"4/3 XXXXXX-1300570-301XXXXXX-2600570-301

130.X"61/11X"4/3260.X"8/5X"4/3

057. 600.-/+ 300.-/+)7.3(45)2.7(501

)6.71(552)9.53(025

038. XXXXXX-0400380-301 040.X"4/3X038. 038. 600.-/+ 300.-/+ )2.4(16 )0.12(503

"8/7 XXXXXX-2605780-301 260.x"4/3X"8/7 578. 700.-/+ 300.-/+ )2.6(09 )8.03(744

569. XXXXXX-5405690-301 540.X"8/7X569. 569. 700.-/+ 300.-/+ )0.4(95 )4.02(592

"1 XXXXXX-2600001-301 260.X"8/7X"1 000.1 010.-/+ 300.-/+ )5.5(08 )0.72(293

01.1 XXXXXX-0500011-301 050.X"1X01.1 001.1 010.-/+ 400.-/+ )2.3(74 )2.61(532

"8/1-1 XXXXXX-2605211-301 260.X"1X"8/1-1 521.1 510.-/+ 300.-/+ )8.4(96 )0.42(943

502.1 XXXXXX-0405021-301 040.X"8/1-1X502.1 502.1 510.-/+ 400.-/+ )9.2(24 )5.41(112

"4/1-1 XXXXXX-2600521-301 260.X"8/1-1X"4/1-1 052.1 510.-/+ 400.-/+ )3.4(26 )7.12(413

033.1 XXXXXX-0400331-301 040.X"4/1-1X033.1 033.1 510.-/+ 400.-/+ )6.2(83 )2.31(191

"8/3-1 XXXXXX-2605731-301 260.X"4/1-1X"8/3-1 573.1 510.-/+ 400.-/+ )9.3(75 )7.91(682

"8/1-2 XXXXXX-2605212-301 260.X"2X"8/1-2 521.2 510.-/+ 400.-/+ )5.2(73 )8.21(681


7.1.1

FEP TubingTubing and Pipe

15

Metric Size Tubing

AWG Spaghetti Tubing

3 XXXXXX-0010030-302 0.1X0.3 930.X811. 11.-/+ 400.-/+

4 XXXXXX-0010040-302 0.2X0.4 870.X751. 11.-/+ 400.-/+

5 XXXXXX-0010050-302 0.3X0.5 811X791. 11.-/+ 400.-/+

6 XXXXXX-0010060-302 0.4X0.6 751.X632. 31.-/+ 500.-/+

7 XXXXXX-0010070-302 0.5X0.7 791.X672. 31.-/+ 500.-/+

8 XXXXXX-0010080-302 0.6X0.8 632.X513. 31.-/+ 500.-/+

9 XXXXXX-0010090-302 0.7X0.9 672.X453. 31.-/+ 500.-/+

01 XXXXXX-0010001-302 0.8X0.01 513.X393. 31.-/+ 500.-/+

21 XXXXXX-0010021-302 0.01X0.21 393.X274. 51.-/+ 600.-/+

41 XXXXXX-0010041-302 0.21X0.41 274.X155. 51.-/+ 600.-/+

61 XXXXXX-0010061-302 0.41X0.61 155.X036. 51.-/+ 600.-/+


mm.D.IX.D.O

hcnI

.D.I/.D.OecnareloT

mm

.D.I/.D.OecnareloT

hcnI

llaWyvaeH llaWdradnatS llaWnihT llaWthgiLeziS

)GWA(.moN

.D.IrebmuNtraP

.moNllaW

rebmuNtraP.moNllaW

rebmuNtraP.moNllaW

rebmuNtraP.moNllaW

dradnatSgnigakcaP

42 220. 42HPF 610. 42SPF 210. 42TPF 010. 42LPF 600. loops.tf000,1








61 350. 61HPF 020. 61SPF 610. 61TPF 210. 61LPF 600. loops.tf0001








8 331. 8HPF 030. 8SPF 020. 8TPF 510. 8LPF 800. liochtgnelmodnaR




7.1.1

FEP AWG Spaghetti, Convoluted, ShrinkTubing and Pipe

16

AWG Spaghetti Tubing, cont.

FEP Spaghetti tubing is supplied in random length coils, with a minimum coil length of 12 feet. Custom packaging,lengths, and sizes are available upon request.

Convoluted Tubing

BA

Fractional Heat Shrink Tubing (1.3:1)

"8/3 8/3PEF3.1SH 894. 383. 510. 400.-/+

"61/7 EF3.1SH 61/7P 085. 844. 020. 400.-/+

"2/1 PEF3.1SH 2/1 666. 015. 020. 400.-/+

"8/5 PEF3.1SH 8/5 038. 736. 520. 400.-/+

"4/3 PEF3.1SH 4/3 000.1 467. 030. 400.-/+

"8/7 PEF3.1SH 8/7 071.1 198. 530. 400.-/+

"1 PEF3.1SH 00.1 033.1 020.1 530. 400.-/+

-303 5100230 XXXXXX- 181.X023. 510. 8

-303 5104140 XXXXXX- 372.X414. 510. 8

3 -30 0200540 XXXXXX- 303.X054. 020. 7

-303 0200950 XXXXXX- 524.X095. 020. 6

-303 5200660 XXXXXX- 584.X066. 520. 6

3 -30 5200870 XXXXXX- 806.X087. 520. 6

3 -30 0300011 XXXXXX- 058.X001.1 030. 2/1-4


)GWA(.moN

.D.IrebmuNtraP

.moNllaW

rebmuNtraP.moNllaW

rebmuNtraP.moNllaW

rebmuNtraP.moNllaW

dradnatSgnigakcaP


"B"X"A"ssenkcihTllaW hctiP

eziS)hcni(

rebmuNtraPdednapxEmuminiM

.D.IderevoceRmumixaM

.D.IssenkcihTllaW

derevoceRecnareloTllaW

derevoceR








7.1.1

FEP AWG Shrink, PipeTubing and Pipe

17

AWG Heat Shrink Tubing (1.3:1)

Schedule 40 Pipe


FEP Shrink Tubing is supplied in 4 foot lengths. Custom packaging, sizes, lengths, and colors are available uponrequest.

XXXXXX-8800450-305 "4/1 045. 880. 010.-/+ 00.-/020.+

XXXXXX-9010480-305 "2/1 048. 901. 010.-/+ 00.-/020.+

XXXXXX-3110501-305 "4/3 050.1 311. 010.-/+ 00.-/020.+

XXXXXX-3315131-305 "1 513.1 331. 510.-/+ 00.-/020.+

XXXXXX-4515732-305 "2 573.2 451. 510.-/+ 00.-/020.+

42 42PEF3.1SH 130. 720. 800. 200.-/+

22 PEF3.1SH 22 630. 230. 800. 200.-/+

02 EF3.1SH 02P 540. 930. 800. 200.-/+

81 EF3.1SH 81P 060. 940. 800. 200.-/+

61 PEF3.1SH 61 570. 160. 900. 200.-/+

41 PEF3.1SH 41 290. 270. 900. 200.-/+

21 PEF3.1SH 21 511. 980. 900. 200.-/+

01 PEF3.1SH 01 141. 211. 010. 300.-/+

9 PEF3.1SH 9 851. 421. 010. 300.-/+

8 PEF3.1SH 8 081. 341. 010. 300.-/+

7 PEF3.1SH 7 791. 851. 110. 400.-/+

6 PEF3.1SH 6 522. 081. 110. 400.-/+

5 EF3.1SH 5P 842. 891. 110. 400.-/+

4 EF3.1SH 4P 092. 622. 110. 400.-/+

3 PEF3.1SH 3 013. 942. 110. 400.-/+

2 PEF3.1SH 2 563. 082. 210. 400.-/+

1 PEF3.1SH 1 004. 113. 210. 400.-/+

0 PEF3.1SH 0 044. 943. 210. 400.-/+

eziS)hcni(



.D.IssenkcihTllaW


derevoceR


hcnIllaWmuminiM

hcnIecnareloT.D.O

hcnIecnareloTllaW

hcnI


7.1.1

FEP Retractable CoilsTubing and Pipe

18

Retractable Coils

Standard left/right tail length is 6 inches. Please consult factory for special length coils or tails.

-2608810-307 3000XX "61/1X"61/3 057. )1.91( 3 )67( 21 )503(

-2608810-307 6000XX "61/1X"61/3 057. )1.91( 6 )251( 42 )016(

-2608810-307 2100XX "61/1X"61/3 057. )1.91( 21 )503( 84 )9121(

810-307 8100XX-2608 "61/1X"61/3 057. )1.91( 81 )754( 27 )9281(

520-307 3000XX-2600 4/1 " "8/1X 00.1 )4.52( 3 )67( 21 )503(

-2600520-307 6000XX 4/1 " "8/1X 00.1 )4.52( 6 )251( 42 )016(

-2600520-307 2100XX 4/1 " "8/1X 00.1 )4.52( 21 )503( 84 )9121(

-2600520-307 8100XX 4/1 " "8/1X 00.1 )4.52( 81 )754( 27 )9281(

-2603130-307 3000XX 61/5 " "61/3X 526.1 )3.14( 3 )67( 21 )503(

-2603130-307 X 6000X 61/5 " "61/3X 526.1 )3.14( 6 )251( 42 )016(

-2603130-307 2100XX 61/5 " "61/3X 526.1 )3.14( 21 )503( 84 )9121(

2603130-307 8100XX 61/5 " "61/3X 526.1 )3.14( 81 )754( 27 )9281(

-2605730-307 3000XX 8/3 " "4/1X 526.1 )3.14( 3 )67( 21 )503(

-2605730-307 6000XX 8/3 " "4/1X 526.1 )3.14( 6 )251( 42 )016(

-2605730-307 2100XX 8/3 " "4/1X 526.1 )3.14( 21 )503( 84 )9121(

-2605730-307 5100XX 8/3 " "4/1X 526.1 )3.14( 51 )183( 06 )4251(

-2605730-307 8100XX 8/3 " "4/1X 526.1 )3.14( 81 )754( 27 )9281(

-2608340-307 3000XX 61/7 " "61/5X 00.3 )2.67( 3 )67( 21 )503(

-2608340-307 6000XX 61/7 " "61/5X 00.3 )2.67( 6 )251( 42 )016(

-2608340-307 2100XX 61/7 " "61/5X 00.3 )2.67( 21 )503( 84 )9121(

-2600050-307 3000XX "8/3X"2/1 00.3 )2.67( 3 )67( 21 )503(

-2600050-307 6000XX "8/3X"2/1 00.3 )2.67( 6 )251( 42 )016(

RightLength

ALeft

Length


htgneLdetcarteR"A"

)mm(hcnI



7.1.1

FEP General InformationTubing and Pipe

19

trahCsuidaRdneBgnibuTPEF

.D.O .D.IllaW


suidaR

8/1 " 61/1 " 30. 1 2/1 "

4/1 " 8/1 " 260. "2/1

4/1 " 23/5 " 740. "4/3

4/1 " 61/3 " 30. 1 "1

"61/5 "61/3 260. 2/1 "

61/5 " "4/1 30. 1 "4/3-1

"8/3 "4/1 260. "1

3 "8/ 61/5 " 30. 1 2/1-2 "

"2/1 "8/3 260. "2

"2/1 "61/7 30. 1 "4

/5 "8 2/1 " 260. 3"

8/5 " 61/9 " 30. 1 /1-5 2"

4/3 " 8/5 " 260. 6"

4/3 " "61/11 30. 1 8"

8/7 " 4/3 " 260. 21 "

"1 "8/7 260. 61 "


7.1.1

Introduction, PTFE TubingTubing and Pipe

20

Features:

100% virgin PTFE resinused on all products.

Most flexibleFluoropolymer available.



Low permeability.


FDA Compliant.

Excellent electricalproperties.

Benefits:


Longer lasting.


Higher abrasionresistance with noprocess contamination.


Safety.


Useful in insulationapplications.

Specifications:

Materials:

PTFE Products in this catalog are manufactured using resinscomplying with ASTM D 3295 Specification.

Electrical insulation products conform to ASTM-D3295-97.Round Beading conforms to ASTM-D1710.Spiral Cut Cable Wrap conforms to ASTM-D4895-98.

Flammability:

Listed VW-1 by the Underwriters’ Laboratories, Inc. in theirburning test classification for polymeric materials and passesthe UL 83 vertical flame test. In a flame situation, PTFE tubingresists combustion and does not promote flame spread.

FDA Compliance:

Most PTFE resins qualify for use in contact with food incompliance with FDA regulation 21 CFR 177.1500, 177.520,177.2600, 176.180, 176.170, 175.300, 175.170, and 175.105.

Temperature Ranges:

-410° - 500° F (-246° -260° C)

Product Overview:

Partek/Atlantic’s line of PTFE (Polytetrafluoroethylene) tubing is the most flexible product offered. PTFE tubing resistscorrosive liquids and gases, and has the broadest temperature range of all Fluoropolymer products. The tubing has asmooth non-stick surface with low permeability.


7.1.1

PTFE TubingTubing and Pipe

21



Working pressure calculated using a Safety Factor of 5. Please note that other manufacturers may use a SafetyFactor of 4 when presenting their data. PTFE Industrial Wall Tubing through 1” O.D. is supplied in random length coils,with a minimum coil length of 12 feet. Sizes over 1” O.D. are supplied in 5 or 10 foot straight lengths. Custom packag-ing and sizes are available upon request.


ssenkcihTlanimoN

.D.O.D.O

ecnareloTllaW

ecnareloT

gnikroWerusserP

)rab(GISP

tsruBerusserP

)rab(GISP

"23/3 XXXXXX-1304900-101 130.X"23/1X"23/3 490. 400.-/+ 300.-/+ )8.62(983 )3.531(269,1

"8/1 XXXXXX-1305210-101 130.X"61/1X"8/1 521. 400.-/+ 300.-/+ )3.02(592 )5.201(784,1

"23/5 XXXXXX-1306510-101 130.x"23/3X"23/5 751. 500.-/+ 300.-/+ )4.61(832 )6.28(791,1

"61/3 XXXXXX-1308810-101XXXXXX-2608810-101

130.X"8/1X"61/3260.X"61/1X"61/3

881. 500.-/+ 300.-/+)7.31(991)1.72(393

)1.96(200,1)7.631(389,1


130.X"61/3X"4/1740.X"23/5X"4/1

260.X"8/1X"4/1052. 500.-/+ 300.-/+

)3.01(051)8.51(922)7.02(003

)1.25(657)6.97)451,1)2.401(115,1

"61/5 XXXXXX-1303130-101XXXXXX-2603130-101

130.X"4/1X"61/5260.X"61/3X"61/5

313. 500.-/+ 300.-/+)3.8(021)7.61(242

)8.14(606)1.48(0221

"8/3 XXXXXX-1305730-101XXXXXX-2605730-101

130.X"61/5X"8/3260.X"4/1X"8/3

573. 500.-/+ 300.-/+)9.6(001)8.31(002

)9.43(605)6.07(420,1

"61/7 XXXXXX-1308340-101XXXXXX-2608340-101

130.X"8/3X"61/7260.X"61/5X"61/7

834. 500.-/+ 300.-/+)9.5(68

)1.21(571)0.03(534)8.06(288

"2/1 XXXXXX-1300050-101XXXXXX-2600050-101

130.X"61/7X"2/1260.X"8/3X"2/1

005.600.-/+500.-/+

300.-/+)2.5(57

)3.01(051)3.62(183)4.35(477

"61/9 XXXXXX-1302650-101XXXXXX-2602650-101

130.x"2/1x"61/9260.x"61/7x"61/9

265. 600.-/+ 300.-/+)6.4(76)4.9(731

)4.32(933)6.74(096

"8/5 XXXXXX-1305260-101XXXXXX-2605260-101

130.X"61/9X"8/5260.X"2/1X"8/5

526. 600.-/+ 300.-/+)1.4(06)6.8(521

)0.12(503)9.24(226

"61/11 XXXXXX-1308860-101XXXXXX-2608860-101

130.X"8/5X"61/11260.X"61/9X"61/11

886. 600.-/+ 300.-/+)8.3(55)8.7(211

)1.91(872)1.93(765

"4/3 XXXXXX-1300570-101XXXXXX-2600570-101

130.X"61/11X"4/3260.X"8/5X"4/3

057. 600.-/+ 300.-/+)4.3(05)9.6(001

)6.71(552)9.53(025

038. XXXXXX-0400380-101 040.X"4/3X038. 038. 600.-/+ 300.-/+ )2.4(16 )7.12(503

"8/7 XXXXXX-2605780-101 260.x"4/3X"8/7 578. 700.-/+ 300.-/+ )2.6(09 )8.03(744

569. XXXXXX-5405690-101 540.X"8/7X569. 569. 700.-/+ 300.-/+ )0.4(95 )4.02(592

"1 XXXXXX-2600001-101 260.X"8/7X"1 000.1 010.-/+ 300.-/+ )5.5(08 )0.72(293

01.1 XXXXXX-0500011-101 050.X"1X01.1 001.1 010.-/+ 400.-/+ )2.3(74 )7.61(532

502.1 XXXXXX-0405021-101 040.X"8/1-1X502.1 502.1 510.-/+ 400.-/+ )9.2(24 )0.51(112

033.1 XXXXXX-0400331-101 040.X"4/1-1X033.1 033.1 510.-/+ 400.-/+ )6.2(83 )2.31(191

085.1 XXXXXX-0400851-101 040.X"2/1-1X085.1 085.1 510.-/+ 400.-/+ )2.2(23 )1.11(161


7.1.1


22

Metric Size Tubing

Fractional Spaghetti Tubing

PTFE Metric and Fractional Spaghetti Tubing except for 1” is supplied in random length coils, with a minimum coillength of 12 feet. 1” size is shipped in 5 and 10 foot lengths as standard. Custom packaging, sizes, and lengths areavailable upon request.

3 XXXXXX-0010030-102 0.1X0.3 930.X811. 11.-/+ 400.-/+

4 XXXXXX-0010040-102 0.2X0.4 870.X751. 11.-/+ 400.-/+

5 XXXXXX-0010050-102 0.3X0.5 811X791. 11.-/+ 400.-/+

6 XXXXXX-0010060-102 0.4X0.6 751.X632. 31.-/+ 500.-/+

7 XXXXXX-0010070-102 0.5X0.7 791.X672. 31.-/+ 500.-/+

8 XXXXXX-0010080-102 0.6X0.8 632.X513. 31.-/+ 500.-/+

9 XXXXXX-0010090-102 0.7X0.9 672.X453. 31.-/+ 500.-/+

01 XXXXXX-0010001-102 0.8X0.01 513.X393. 31.-/+ 500.-/+

21 XXXXXX-0010021-102 0.01X0.21 393.X274. 51.-/+ 600.-/+

41 XXXXXX-0010041-102 0.21X0.41 274.X155. 51.-/+ 600.-/+

61 XXXXXX-0010061-102 0.41X0.61 155.X036. 51.-/+ 600.-/+


mm.D.IX.D.O

hcnI

.D.I/.D.OecnareloT

mm

.D.I/.D.OecnareloT

hcnI

llaWdradnatS llaWnihT llaWthgiLeziS)hcni(

.D.I.moN rebmuNtraP.moNllaW

rebmuNtraP.moNllaW

rebmuNtraP.moNllaW

gnigakcaPdradnatS

"8/1 521. 8/1SFT 020. 8/1TFT 510. 8/1LFT 800. liochtgnelmodnaR







"8/5 236. 8/5SFT 030. 8/5TFT 520. liochtgnelmodnaR

"4/3 067. 4/3SFT 530. 4/3TFT 030. liochtgnelmodnaR

"8/7 588. 8/7SFT 530. liochtgnelmodnaR

"1 010.1 001SFT 530. htgneL'01&'5thgiartS


7.1.1


23

AWG Spaghetti Tubing

PTFE AWG Spaghetti Tubing is supplied in random length coils, with a minimum coil length of 12 feet. Custompackaging, sizes, lengths, and colors are available upon request.


)GWA(.moN

.D.IrebmuNtraP

.moNllaW

rebmuNtraP.moNllaW

rebmuNtraP.moNllaW

rebmuNtraP.moNllaW

dradnatSgnigakcaP

23 010. 23TFT 700. 23LFT 500. loops.tf000,1

03 210. 03SFT 900. 03TFT 900. 03LFT 600. loops.tf000,1

82 510. 82SFT 900. 82TFT 900. loops.tf000,1


42 220. 42HFT 610. 42SFT 010. 42TFT 010. 42LFT 600. loops.tf000,1








61 350. 61HFT 020. 61SFT 210. 61TFT 210. 61LFT 600. 1, loops.tf000

51 950. 51HFT 020. 51SFT 210. 51TFT 210. 51LFT 600. 1, loops.tf000

41 660. 41HFT 020. 41SFT 210. 41TFT 210. 41LFT 800. loops.tf005






8 331. 8HFT 030. 8SFT 510. 8TFT 510. 8LFT 800. liochtgnelmodnaR




4 802. 4SFT 510. 4TFT 510. 4LFT 010. liochtgnelmodnaR






7.1.1

PTFE Heat Shrink TubingTubing and Pipe

24

Fractional Heat Shrink Tubing (2:1), Industrial Wall

PTFE Shrink Tubing is supplied in 4 foot lengths. Custom packaging, sizes, lengths, and colors are available uponrequest.

Fractional Heat Shrink Tubing (2:1), Standard Wall

"8/1 8/1IFT2SH 661. 031. 030. 500.-/+

"61/3 61/3IFT2SH 052. 391. 030. 500.-/+

"4/1 4/1IFT2SH 333. 752. 030. 500.-/+

"61/5 61/5IFT2SH 514. 023. 030. 500.-/+

"8/3 8/3IFT2SH 894. 383. 030. 500.-/+

"61/7 61/7IFT2SH 085. 844. 030. 600.-/+

"2/1 2/1IFT2SH 666. 015. 030. 600.-/+

"61/9 61/9IFT2SH 847. 275. 030. 600.-/+

"8/5 8/5IFT2SH 038. 736. 030. 600.-/+

"61/11 61/11IFT2SH 519. 007. 230. 600.-/+

"4/3 4/3IFT2SH 000.1 467. 040. 700.-/+

"8/7 8/7IFT2SH 071.1 198. 540. 700.-/+

"1 00.1IFT2SH 033.1 020.1 050. 800.-/+

Fractional Heat Shrink Tubing (2:1), Light Wall

Fractional Heat Shrink Tubing (2:1), Thin Wall

"8/1 8/1SFT2SH 512. 031. 020. 400.-/+

"4/1 4/1SFT2SH 014. 062. 020. 400.-/+

"61/5 61/5SFT2SH 074. 923. 020. 400.-/+

"8/3 8/3SFT2SH 065. 993. 520. 600.-/+

"61/7 61/7SFT2SH 556. 264. 520. 600.-/+

"2/1 2/1SFT2SH 057. 425. 520. 600.-/+

"8/5 8/5SFT2SH 039. 556. 030. 600.-/+

"4/3 4/3SFT2SH 521.1 687. 530. 800.-/+

"8/7 8/7FT2SH 031.1 119. 530. 800.-/+

"1 00.1SFT2SH 005.1 630.1 530. 800.-/+

"8/1 8/1TFT2SH 512. 031. 510. 300.-/+

"4/1 4/1TFT2SH 014. 062. 510. 400.-/+

"61/5 61/5TFT2SH 074. 923. 510. 400.-/+

"8/3 8/3TFT2SH 065. 993. 510.

"61/7 61/7TFT2SH 556. 264. 810.

"2/1 2/1TFT2SH 057. 425. 810.

"8/5 8/5TFT2SH 039. 556. 020.

"4/3 4/3TFT2SH 521.1 687. 520.

"8/7 8/7TFT2SH 031.1 119. 520.

"1 00.1TFT2SH 005.1 630.1 520.

"8/1 8/1LFT2SH 512. 031. 010.

"4/1 4/1LFT2SH 014. 062. 010.

"61/5 1/5LFT2SH 6 074. 923. 010.

eziS)hcni(



.D.IssenkcihTllaW


derevoceR


7.1.1


25

AWG Heat Shrink Tubing (2:1), Standard Wall

AWG Heat Shrink Tubing (2:1), Thin Wall

PTFE Shrink Tubing is supplied in 4 foot lengths. Custom packaging, sizes, lengths, and colors are available uponrequest.

03 03SFT2SH 430. 510. 900. 200.-/+

82 82SFT2SH 830. 810. 900. 200.-/+

62 62SFT2SH 640. 220. 900. 200.-/+

42 42SFT2SH 050. 720. 210. 200.-/+

22 22SFT2SH 550. 230. 210. 200.-/+

02 02SFT2SH 060. 930. 610. 300.-/+

91 91SFT2SH 560. 340. 610. 300.-/+

81 81SFT2SH 670. 940. 610. 300.-/+

71 71SFT2SH 580. 450. 610. 300.-/+

61 61SFT2SH 390. 160. 610. 300.-/+

51 51SFT2SH 011. 760. 610. 300.-/+

41 41SFT2SH 021. 270. 610. 300.-/+

31 31SFT2SH 041. 080. 610. 300.-/+

21 21SFT2SH 051. 980. 610. 300.-/+

11 11SFT2SH 071. 101. 610. 300.-/+

01 01SFT2SH 191. 211. 610. 300.-/+

9 9SFT2SH 502. 421. 020. 400.-/+

8 8SFT2SH 042. 141. 020. 400.-/+

7 7SFT2SH 072. 851. 020. 400.-/+

6 6SFT2SH 203. 871. 020. 400.-/+

5 5SFT2SH 023. 891. 020. 400.-/+

4 4SFT2SH 073. 422. 020. 400.-/+

3 3SFT2SH 093. 942. 020. 400.-/+

2 2SFT2SH 034. 872. 020. 400.-/+

1 1SFT2SH 054. 113. 020. 400.-/+

0 0SFT2SH 074. 743. 020. 400.-/+

03 03TFT2SH 430. 510. 900. 200.-/+

82 82TFT2SH 830. 810. 900. 200.-/+

62 62TFT2SH 640. 220. 900. 300.-/+

42 42TFT2SH 050. 720. 010. 200.-/+

22 22TFT2SH 550. 230. 010. 300.-/+

02 02TFT2SH 060. 930. 210. 300.-/+

91 91TFT2SH 560. 340. 210. 300.-/+

81 81TFT2SH 670. 940. 210. 300.-/+

71 71TFT2SH 580. 450. 210. 300.-/+

61 61TFT2SH 390. 160. 210. 300.-/+

51 51FT2SH 011. 760. 210. 300.-/+

41 41TFT2SH 021. 270. 210. 300.-/+

31 31TFT2SH 041. 080. 210. 300.-/+

eziS)hcni(



.D.IssenkcihTllaW


derevoceR


7.1.1


26

AWG Heat Shrink Tubing (2:1), Thin Wall, cont.

AWG Heat Shrink Tubing (2:1), Light Wall

21 21TFT2SH 051. 980. 210. 300.-/+

11 11TFT2SH 071. 101. 210. 300.-/+

01 01TFT2SH 191. 211. 510. 300.-/+

9 9TFT2SH 502. 421. 510. 400.-/+

8 8TFT2SH 042. 141. 510. 400.-/+

7 7TFT2SH 072. 851. 510. 400.-/+

6 6TFT2SH 203. 871. 510. 400.-/+

5 5TFT2SH 023. 891. 510. 400.-/+

4 4TFT2SH 073. 422. 510. 400.-/+

3 3TFT2SH 093. 942. 510. 400.-/+

2 2TFT2SH 034. 872. 510. 400.-/+

1 1TFT2SH 054. 113. 510. 400.-/+

0 0TFT2SH 074. 743. 510. 400.-/+

03 03LFT2SH 430. 510. 600. 200.-/+

82 82LFT2SH 830. 810. 600. 200.-/+

62 62LFT2SH 640. 220. 600. 200.-/+

42 42LFT2SH 050. 520. 600. 200.-/+

22 22LFT2SH 550. 130. 600. 200.-/+

02 02LFT2SH 060. 830. 600. 200.-/+

91 91LFT2SH 560. 340. 600. 200.-/+

81 81LFT2SH 670. 640. 600. 200.-/+

71 71LFT2SH 580. 450. 600. 200.-/+

61 61LFT2SH 390. 750. 600. 200.-/+

51 51LFT2SH 011. 360. 600. 200.-/+

41 41LFT2SH 021. 270. 800. 200.-/+

31 31LFT2SH 041. 080. 800. 200.-/+

21 21LFT2SH 051. 980. 800. 200.-/+

11 11LFT2SH 071. 990. 800. 200.-/+

01 01LFT2SH 191. 011. 800. 200.-/+

9 9LFT2SH 502. 221. 800. 200.-/+

8 8LFT2SH 042. 931. 800. 200.-/+

7 7LFT2SH 072. 451. 010. 300.-/+

6 6LFT2SH 203. 271. 010. 300.-/+

5 5LFT2SH 023. 291. 010. 300.-/+

4 4LFT2SH 073. 412. 010. 300.-/+

3 3LFT2SH 093. 142. 010. 300.-/+

2 2LFT2SH 034. 072. 010. 300.-/+

1 1LFT2SH 054. 103. 010. 300.-/+

0 0LFT2SH 074. 743. 210. 300.-/+

eziS)hcni(



.D.IssenkcihTllaW


derevoceR

7.1.1

PTFE Heat Shrink & Convoluted Tubing


Tubing and Pipe

27

Convoluted Tubing

PTFE Convoluted Tubing is made to order. Custom packaging, sizes, and colors are available upon request. Addition-al charges may apply for custom cuffs.

CE

DBA

-103 3200230 XXXXXX- 181.X023. 320. 082. 4/3 " 8

-103 7204140 XXXXXX- 372.X414. 720. 243. 1" 8

3 -10 7200540 XXXXXX- 303.X054. 720. 514. 1" 8

-103 9200350 XXXXXX- 463.X035. 920. 774. 1" 7

-103 9200950 XXXXXX- 524.X095. 920. 045. 1" 7

-103 9200660 XXXXXX- 584.X066. 920. 576. "4/1-1 7

3 -10 5300870 XXXXXX- 806.X087. 530. 008. 2/1-1 " 7

-103 5305790 XXXXXX- 037.X579. 530. 529. 2/1-1 " 6

3 -10 5300011 XXXXXX- 058.X001.1 530. 060.1 2" 6


"B"X"A"ssenkcihTllaW

"C".D.OffuC

"D"htgneLffuC

"E"hctiP


7.1.1

PTFE Spiral Cut Cable Wrap & BeadingTubing and Pipe

28

XXXXXX-0205210-104 521. 500.-/+ 020. 800.-/+ 212. 510.-/+ "2/1

XXXXXX-0308810-104 881. 500.-/+ 030. 800.-/+ 213. 510.-/+ "1

XXXXXX-0300520-104 052. 500.-/+ 030. 800.-/+ 573. 510.-/+ "2

XXXXXX-0305730-104 573. 500.-/+ 030. 800.-/+ 734. 510.-/+ "2/1-2

XXXXXX-0300050-104 005. 600.-/+ 030. 800.-/+ 265. 510.-/+ "3

XXXXXX-0300570-104 057. 700.-/+ 230. 800.-/+ 578. 510.-/+ "4

XXXXXX-0400001-104 00.1 010.-/+ 040. 800.-/+ 000.1 510.-/+ "6

Spiral Cut Cable Wrap

PTFE Spiral Cut Wrap is supplied in non-continuous spools. Drawing above depicts a left hand spiral cut. Product isavailable in left or right hand cut. Please specify with proper suffix at end of part number. Custom packaging, sizes,and colors are available upon request.

Round Beading/Miniature Rod

510BFT 510. 200.-/+ loops.tf000,1

020BFT 020. 200.-/+ loops.tf000,1

520BFT 520. 200.-/+ loops.tf000,1

820BFT 820. 200.-/+ loops.tf000,1

130BFT 130. 200.-/+ loops.tf000,1

530BFT 530. 200.-/+ loops.tf000,1

930BFT 930. 200.-/+ loops.tf000,1

340BFT 340. 200.-/+ loops.tf000,1

740BFT 740. 200.-/+ loops.tf000,1

050BFT 050. 200.-/+ loops.tf000,1

TOP/ SECTION CUT

B

CA

D

DEPICTS LEFT HAND CUT

rebmuNtraP.D.OeziS

"A".D.O

ecnareloT

llaWssenkcihT

"B"

llaWecnareloT

hctiP"D"

hctiPecnareloT

mumixaM.D.OeldnuB

"C"

rebmuNtraP retemaiD ecnareloT gnigakcaPdradnatS

Round Beading/Miniature Rod, cont.


29

7.1.1

PTFE Beading, General InformationTubing and Pipe

PTFE Beading/Miniature Rod is supplied in non-continuous spool lengths as noted above. Custom packaging, sizes,and colors are available upon request.

550BFT 550. 300.-/+ loops.tf000,1

060BFT 060. 300.-/+ loops.tf000,1

260BFT 260. 300.-/+ loops.tf000,1

070BFT 070. 300.-/+ loops.tf000,1

270BFT 270. 300.-/+ loops.tf000,1

870BFT 870. 400.-/+ loops.tf005

080BFT 080. 400.-/+ loops.tf005

480BFT 480. 400.-/+ loops.tf005

090BFT 090. 400.-/+ loops.tf005

490BFT 490. 400.-/+ loops.tf005

001BFT 001. 400.-/+ loops.tf005

901BFT 901. 400.-/+ loops.tf005

511BFT 511. 400.-/+ loops.tf005

521BFT 521. 400.-/+ loops.tf005

051BFT 051. 400.-/+ loops.tf005

rebmuNtraP retemaiD ecnareloT gnigakcaPdradnatS

trahCsuidaRdneBgnibuTEFTP

.D.O .D.IllaW


suidaR

8/1 " 61/1 " 30. 1 2/1 "

4/1 " 8/1 " 260. "2/1

4/1 " 23/5 " 740. "4/3

4/1 " 61/3 " 30. 1 "1

"61/5 "61/3 260. 4/3 "

61/5 " "4/1 30. 1 "4/3-1

"8/3 "4/1 260. "4/3

3 "8/ 61/5 " 30. 1 2/1-2 "

"2/1 "8/3 260. "2/1-2

"2/1 "61/7 30. 1 "4

/5 "8 2/1 " 260. 3"

8/5 " 61/9 " 30. 1 21 "

4/3 " 8/5 " 260. 6"

4/3 " "61/11 30. 1 61 "

8/7 " 4/3 " 260. 21 "

"1 "8/7 260. 61 "


7.1.1

Introduction, MFA TubingTubing and Pipe

30

Features:

100% virgin MFA resinused on all products.


Smoothest nonsticksurface of allfluoropolymersavailable.

Low permeability.


Excellent electricalproperties.

Benefits:



Provides fewer sites forbacterial growth andprocess contamination.


Safety.

Useful in insulationapplications.

Specifications:

Materials:

MFA Products in this catalog are manufactured using resinscomplying with ASTM D 6314-98 Specification.

Flammability:

Listed VW-1 by the Underwriters’ Laboratories, Inc. in theirburning test classification for polymeric materials and passesthe UL 83 vertical flame test. In a flame situation, PTFE tubingresists combustion and does not promote flame spread.

Temperature Ranges:

-329° - 482° F (-200° -250° C)

Product Overview:

Partek/Atlantic’s line of MFA (Polytetrafluoroethylene-perfluoromethylvinylether) tubing has the smoothest nonsticksurface of all fluoropolymers offered. MFA is a semicrystalline thermoprocessable fluoropolymer ideal for hightemperature and electrical insulation applications.

Working pressure calculated using a Safety Factor of 5. Please note that other manufacturers may use a SafetyFactor of 4 when presenting their data. MFA Industrial Wall Tubing is supplied in 25 foot increments up to 1,000 feetcontinuous for most sizes. Custom packaging and sizes are available upon request.

MFA Size Tubing



7.1.1

MFA TubingTubing and Pipe

31

"8/1 XXXXXX-1305210-901 130.X"61/1X"8/1 521. 400.-/+ 300.-/+ )4.52(963 )2.821(958,1

"61/3 XXXXXX-1308810-901XXXXXX-2608810-901

130.X"8/1X"61/3260.X"61/1X"61/3

881. 500.-/+ 300.-/+)1.71(942)9.33(294

)4.68(352,1)9.071(874,2


130.X"61/3X"4/1740.X"23/5X"4/1

260.X"8/1X"4/1052. 500.-/+ 300.-/+

)1.31(091)7.91(682)2.62(083

)2.56(549)5.99(344,1)2.031(988,1

"61/5 XXXXXX-1303130-901 130.X"4/1X"61/5 313. 500.-/+ 300.-/+)4.01(051)9.02(303

)3.25(857)2.501(525,1

"8/3 XXXXXX-1305730-901XXXXXX-2605730-901

130.X"61/5X"8/3260.X"4/1X"8/3

573. 500.-/+ 300.-/+)6.8(521)9.71(062

)6.34(336)3.88(082,1

"61/7 XXXXXX-1308340-901 130.X"8/3X"61/7 834. 500.-/+ 300.-/+)4.7(801)1.51(912

)5.73(345)0.67(201,1

"2/1 XXXXXX-1300050-901XXXXXX-2600050-901

130.X"61/7X"2/1260.X"8/3X"2/1

005.600.-/+500.-/+

300.-/+)6.6(59

)4.31(591)8.23(674)7.66(869

"61/9 XXXXXX-1302650-901 130.x"2/1x"61/9 265. 600.-/+ 300.-/+)8.5(48

)8.11(171)2.92(424)5.95(268

"8/5 XXXXXX-1305260-901 130.X"61/9X"8/5 526. 600.-/+ 300.-/+)2.5(57

)0.11(061)7.62(183)6.35(877

"61/11 XXXXXX-1308860-901 130.X"8/5X"61/11 886. 600.-/+ 300.-/+)7.4(96)7.9(141

)9.32(743)8.84(807

"4/3 XXXXXX-1300570-901XXXXXX-2600570-901

130.X"61/11X"4/3260.X"8/5X"4/3

057. 600.-/+ 300.-/+)7.4(86)1.9(231

)9.12(813)8.44(056

038. XXXXXX-0400380-901 040.X"4/3X038. 038. 600.-/+ 300.-/+ )2.5(67 )3.62(183

569. XXXXXX-5405690-901 540.X"8/7X569. 569. 700.-/+ 300.-/+ )1.5(37 )5.52(963

"1 XXXXXX-2600001-901 260.X"8/7X"1 000.1 010.-/+ 300.-/+ )9.6(001 )8.33(094

01.1 XXXXXX-0500011-901 050.X"1X01.1 001.1 010.-/+ 400.-/+ )0.4(85 )3.02(492

"8/1-1 XXXXXX-2605211-901 260.X"1X"8/1-1 521.1 510.-/+ 300.-/+ )0.6(78 )1.03(634


ssenkcihTlanimoN

.D.O.D.O

ecnareloTllaW

ecnareloT

gnikroWerusserP

)rab(GISP

tsruBerusserP

)rab(GISP


7.1.1

MFA General InformationTubing and Pipe

32

trahCsuidaRdneBgnibuTAFM

.D.O .D.IllaW


suidaR

8/1 " 61/1 " 130. 2/1 "

4/1 " 8/1 " 260. 2/1 "

4/1 " 23/5 " 740. 4/3 "

4/1 " 61/3 " 130. 1"

"61/5 "4/1 130. "4/3-1

8/3 " 4/1 " 260. 1"

8/3 " 61/5 " 130. "2/1-2

2/1 " 8/3 " 260. 2"

2/1 " 61/7 " 130. 4"

8/5 " 61/9 " 130. 2/1-5 "

4/3 " 8/5 " 260. 6"

4/3 " "61/11 130. 8"

1" 8/7 " 260. 61 "

7.1.1

Introduction, ETFE TubingTubing and Pipe

33

Features:

Abrasion resistant.

100% virgin ETFE resinused on all products.

Good chemicalresistance.

Low Permeability.

Weather resistant.

Low specific gravitywith excellent durability.

Benefits:

Excellent wear due tofriction.


Useful in mostapplications with longcycle life.

Useful in severechemical and gasapplications.

Excellent for outdooruse under extremeconditions.

Excellent for aerospaceapplications.

Specifications:

Materials:

Products in this catalog are manufactured using resinscomplying with ASTM-D-3159 Specification.

Flammability:

VO rated under Underwriters Laboratories Inc. burning testclassification for polymeric materials and passes the UL 83vertical flame test.

FDA Compliance:

ETFE resins are not FDA compliant. For compliant materialssee PTFE, FEP, PFA, HP PFA, and PVDF sections in this catalog.

Temperature Ranges:

0° - 302° F (-18° -150° C)

Product Overview:


ETFE (Ethylene-tetrafluoroethylene) is a translucent Fluoropolymer resin. The low specific gravity of ETFE makes itideal for aerospace and other applications where weight and durability are critical factors. ETFE will handle corrosiveliquids or gases in applications where temperatures do not exceed 302°F. Partek/Atlantic manufactures tubing in awide range of sizes.

7.1.1

ETFE TubingTubing and Pipe


Fractional Tubing

Working pressure calculated using a Safety Factor of 5. Please note that other manufacturers may use a SafetyFactor of 4 when presenting their data. ETFE Tubing is supplied in 25 foot increments up to 1000 feet continuous formost sizes. Custom packaging and sizes are available upon request.



ssenkcihTlanimoN

.D.O.D.O

ecnareloTllaW

ecnareloT

gnikroWerusserP

)rab(GISP

tsruBerusserP

)rab(GISP

"23/3 XXXXXX-1304900-211 130.X"23/1X"23/3 490. 400.-/+ 300.-/+ )9.26(219 )1.713(995,4

"8/1 XXXXXX-1305210-211 130.X"61/1X"8/1 521. 400.-/+ 300.-/+ )7.74(296 )3.042(684,3

"23/5 XXXXXX-1306510-211 130.x"23/3X"23/5 751. 500.-/+ 300.-/+ )4.83(755 )5.391(608,2

"61/3 XXXXXX-1308810-211XXXXXX-2608810-211

130.X"8/1X"61/3260.X"61/1X"61/3

881. 500.-/+ 300.-/+)1.23(664)6.36(229

)9.161(943,2)4.023(746,4


130.X"61/3X"4/1740.X"23/5X"4/1

260.X"8/1X"4/1052. 500.-/+ 300.-/+

)8.42(063)0.73(735)4.84(307

)1.221(177,1)5.681(507,2)1.442(145,3

"61/5 XXXXXX-1303130-211XXXXXX-2603130-211

130.X"4/1X"61/5260.X"61/3X"61/5

313. 500.-/+ 300.-/+)4.91(282)1.93(865

)0.89(124,1)2.791(068,2

"8/3 XXXXXX-1305730-211XXXXXX-2605730-211

130.X"61/5X"8/3260.X"4/1X"8/3

573. 500.-/+ 300.-/+)1.41(602)8.23(674

)8.18(781,1)4.561(993,2

"61/7 XXXXXX-1308340-211 130.X"8/3X"61/7 834. 500.-/+ 300.-/+ )9.31(202 )3.07(910,1

"2/1 XXXXXX-1300050-211XXXXXX-2600050-211

130.X"61/7X"2/1260.X"8/3X"2/1

005.600.-/+500.-/+

300.-/+)7.01(551)8.42(063

)6.16(398)1.521(418,1

"61/9 XXXXXX-1302650-211XXXXXX-2602650-211

130.x"2/1x"61/9260.x"61/7x"61/9

265. 600.-/+ 300.-/+)9.01(851)1.22(123

)8.45(497)5.111(716,1

"8/5 XXXXXX-1305260-211XXXXXX-2605260-211

130.X"61/9X"8/5260.X"2/1X"8/5

526. 600.-/+ 300.-/+)8.9(241)4.71(352

)3.94(517)6.001(954,1

"61/11 XXXXXX-1308860-211XXXXXX-2608860-211

130.X"8/5X"61/11260.X"61/9X"61/11

886. 600.-/+ 300.-/+)9.8(921)2.81(462

)9.44(156)6.19(823,1

"4/3 XXXXXX-1300570-211XXXXXX-2600570-211

130.X"61/11X"4/3260.X"8/5X"4/3

057. 600.-/+ 300.-/+)6.7(011)7.61(242

)2.14(795)0.48(912,1

038. XXXXXX-0400380-211 040.X"4/3X038. 038. 600.-/+ 300.-/+ )8.9(241 )3.94(517

"8/7 XXXXXX-2605780-211 260.x"4/3X"8/7 578. 700.-/+ 300.-/+ )3.41(802 )3.27(840,1

569. XXXXXX-5405690-211 540.X"8/7X569. 569. 700.-/+ 300.-/+ )5.9(731 )7.74(296

"1 XXXXXX-2600001-211 260.X"8/7X"1 000.1 010.-/+ 300.-/+ )6.21(281 )3.36(819

01.1 XXXXXX-0500011-211 050.X"1X01.1 001.1 010.-/+ 400.-/+ )5.7(901 )0.83(155

"8/1-1 XXXXXX-2605211-211 260.X"1X"8/1-1 521.1 510.-/+ 400.-/+ )2.11(261 )4.65(718

7.1.1

ETFE General InformationTubing and Pipe


trahCsuidaRdneBgnibuTEFTE

.D.O .D.IllaW


suidaR

8/1 " 61/1 " 30. 1 2/1 "

4/1 " 8/1 " 260. "2/1

4/1 " 23/5 " 740. "4/3

4/1 " 61/3 " 30. 1 "1

"61/5 "61/3 260. 2/1 "

61/5 " "4/1 30. 1 "4/3-1

"8/3 "4/1 260. "2/1-1

3 "8/ 61/5 " 30. 1 3 4/3- "

"2/1 "8/3 260. "3

"2/1 "61/7 30. 1 "6

/5 "8 2/1 " 260. 2/1-4 "

8/5 " 61/9 " 30. 1 /1-8 2"

4/3 " 8/5 " 260. 9"

4/3 " "61/11 30. 1 21 "

8/7 " 4/3 " 260. 81 "

"1 "8/7 260. 42 "

7.1.1

Introduction, PVDF Tubing and PipeTubing and Pipe

36

Features:

100% virgin PVDF resinused on all products.

Good chemicalresistance.

Low permeability.

Weather resistant.

UV and radiationresistance.

High abrasionresistance and thermalstability.

FDA Compliant.

Benefits:


Useful in mostapplications with longcycle life.

Useful in severechemical and gasapplications.

Excellent for outdooruse under extremeconditions.

Useful in severeapplications.

Useful in thermal cyclingapplications.


Specifications:

Materials:

Products in this catalog are manufactured using resinscomplying with ASTM D 3222 Specification.

Flammability:

Listed 94-VO rated by the Underwriters’ Laboratories, Inc. intheir burning test classification for polymeric materials andpasses the UL 83 vertical flame test. In a flame situation, PVDFtubing resists combustion and does not promote flame spread.

FDA Compliance:

Most PVDF resins qualify for use in contact with food incompliance with FDA regulation 21 CFR 177.1500, 175.300,176.170, 176.180, and 177.2610.

Temperature Ranges:

-20° - 250° F (-29° -121° C)

Product Overview:

PVDF (Polyvinylidene Fluoride) is a tough engineering Fluoropolymer that offers a combination of properties benefi-cial for use in many critical applications requiring chemical resistance with low permeability. PVDF exhibits low ex-tractable levels, while providing high mechanical strength, excellent abrasion resistance, and good resistance tomany chemicals and solvents. Atlantic’s PVDF tubing is excellent for use in ultra pure water systems and for groundwater monitoring.


7.1.1

PVDF TubingTubing and Pipe


Fractional Tubing

Metric Tubing

Working pressure calculated using a Safety Factor of 5. Please note that other manufacturers may use a SafetyFactor of 4 when presenting their data. PVDF Tubing is supplied in 25 foot increments up to 1000 feet continuous formost sizes. Custom packaging and sizes are available upon request.


"8/1 XXXXXX-1305210-011 130.X"61/1X"8/1 521. 400.-/+ 300.-/+ )4.81(762 )9.29(843,1

"61/3 XXXXXX-1308810-011 130.X"8/1X"61/3 881. 500.-/+ 300.-/+ )4.21(081 )6.26(809


130.X"61/3X"4/1740.X"23/5X"4/1

260.X"8/1X"4/1052. 500.-/+ 300.-/+

)7.11(071)3.41(802)7.22(033

)2.74(586)1.27(640,1)4.49(963,1

"61/5 XXXXXX-1303130-011XXXXXX-2603130-011

130.X"4/1X"61/5260.X"61/3X"61/5

313. 500.-/+ 300.-/+)5.7(901)1.51(912

)9.73(055)3.67(601,1

"8/3 XXXXXX-1305730-011XXXXXX-2605730-011

130.X"61/5X"8/3260.X"4/1X"8/3

573. 500.-/+ 300.-/+)6.7(111)4.51(422

)6.13(954)0.46(829

"61/7 XXXXXX-1308340-011 130.X"8/3X"61/7 834. 500.-/+ 300.-/+ )4.5(87 )2.72(493

"2/1 XXXXXX-1300050-011XXXXXX-2600050-011

130.X"61/7X"2/1260.X"8/3X"2/1

005.600.-/+500.-/+

300.-/+)7.5(38

)7.11(961)8.32(543)3.84(107

"61/9 XXXXXX-1302650-011 130.x"2/1x"61/9 265. 600.-/+ 300.-/+ )2.4(16 )2.12(703

"8/5 XXXXXX-2605260-011 260.X"2/1X"8/5 526. 600.-/+ 300.-/+ )4.9(631 )9.83(465

"4/3 XXXXXX-2600570-011 260.X"8/5X"4/3 057. 600.-/+ 300.-/+ )9.7(411 )5.23(274

"1 XXXXXX-2600001-011 260.X"8/7X"1 000.1 010.-/+ 300.-/+ )9.5(68 )5.42(553

"8/1-1 XXXXXX-2605211-011 260.X"1X"8/1-1 521.1 510.-/+ 300.-/+ )3.4(36 )8.12(613

3 XXXXXX-0010030-012 0.1X0.3 930.X811. 11.-/+ 400.-/+

4 XXXXXX-0010040-012 0.2X0.4 870.X751. 11.-/+ 400.-/+

5 XXXXXX-0010050-012 0.3X0.5 811X791. 11.-/+ 400.-/+

6 XXXXXX-0010060-012 0.4X0.6 751.X632. 31.-/+ 500.-/+

8 XXXXXX-0010080-012 0.6X0.8 632.X513. 31.-/+ 500.-/+

01 XXXXXX-0010001-012 0.8X0.01 513.X393. 51.-/+ 500.-/+

21 XXXXXX-0010021-012 0.01X0.21 393.X274. 51.-/+ 600.-/+

41 XXXXXX-0010041-012 0.21X0.41 274.X155. 51.-/+ 600.-/+


ssenkcihTlanimoN

.D.O.D.O

ecnareloTllaW

ecnareloT

gnikroWerusserP

)rab(GISP

tsruBerusserP

)rab(GISP


mm.D.IX.D.O

hcnI

.D.I/.D.OecnareloT

mm

.D.I/.D.OecnareloT

hcnI

7.1.1

PVDF Pipe, General InformationTubing and Pipe



Schedule 40 Pipe

XXXXXX-8800450-015 "4/1 045. 880. 400.-/+ 00.-/020.+

XXXXXX-9010480-015 "2/1 048. 901. 400.-/+ 00.-/020.+

XXXXXX-3110501-015 "4/3 050.1 311. 400.-/+ 00.-/020.+

XXXXXX-3315131-015 "1 513.1 331. 500.-/+ 00.-/020.+

XXXXXX-4515732-015 "2 573.2 451. 600.-/+ 00.-/020.+

trahCsuidaRdneBgnibuTFDVP

.D.O .D.IllaW


suidaR

8/1 " 61/1 " 30. 1 2/1 "

4/1 " 8/1 " 260. "2/1

4/1 " 23/5 " 740. "4/3

4/1 " 61/3 " 30. 1 "1

"61/5 "61/3 260. 2/1 "

61/5 " "4/1 30. 1 "4/3-1

"8/3 "4/1 260. "2/1-1

3 "8/ 61/5 " 30. 1 4/3-3 "

"2/1 "8/3 260. "3

"2/1 "61/7 30. 1 "6

/5 "8 2/1 " 260. 2/1-4 "

4/3 " 8/5 " 260. 9"

4/3 " "61/11 30. 1 21 "

"1 "8/7 260. 42 "


hcnIllaWmuminiM

hcnIecnareloT.D.O

hcnIecnareloTllaW

hcnI

Offer of Sale

1. Terms and Conditions of Sale: All descriptions, quotations, proposals,offers, acknowledgments, acceptances and sales of Seller’s products aresubject to and shall be governed exclusively by the terms and conditionsstated herein. Buyer’s acceptance of any offer to sell is limited to theseterms and conditions. Any terms or conditions in addition to, or inconsistentwith those stated herein, proposed by Buyer in any acceptance of an offerby Seller, are hereby objected to. No such additional, different or inconsis-tent terms and conditions shall become part of the contract between Buyerand Seller unless expressly accepted in writing by Seller. Seller’s accep-tance of any offer to purchase by Buyer is expressly conditional uponBuyer’s assent to all the terms and conditions stated herein, including anyterms in addition to, or inconsistent with those contained in Buyer’s offer,Acceptance of Seller’s products shall in all events constitute such assent.2. Payment: Payment shall be made by Buyer net 30 days from the dateof delivery of the items purchased hereunder. Amounts not timely paid shallbear interest at the maximum rate permitted by law for each month or portionthereof that the Buyer is late in making payment. Any claims by Buyer foromissions or shortages in a shipment shall be waived unless Seller receivesnotice thereof within 30 days after Buyer’s receipt of the shipment.3. Delivery: Unless otherwise provided on the face hereof, delivery shall bemade F.O.B. Seller’s plant. Regardless of the method of delivery, however,risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Anydelivery dates shown are approximate only and Seller shall have no liabilityfor any delays in delivery.4. Warranty: Seller warrants that the items sold hereunder shall be freefrom defects in material or workmanship for a period of 18 months from dateof shipment from Parker Hannifin Corporation. THIS WARRANTY COM-PRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMSPROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY,GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER.ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MER-CHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS,IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, ORCOURSE OF DEALING ARE HEREBY DISCLAIMED.NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN-TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY ORPARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR INANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACTSHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENTOF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BYBUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLERBE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIALDAMAGES OF ANY KIND OR NATURE WHATSOEVER, INC.LUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR INANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLDHEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OFCONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, IN-CLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARNOR STRICT LIABILITY.6. Changes, Reschedules and Cancellations: Buyer may request tomodify the designs or specifications for the items sold hereunder as well asthe quantities and delivery dates thereof, or may request to cancel all or partof this order, however, no such requested modification or cancellation shallbecome part of the contract between Buyer and Seller unless accepted bySeller in a written amendment to this Agreement. Acceptance of any suchrequested modification or cancellation shall be at Seller’s discretion, andshall be upon such terms and conditions as Seller may require.7. Special Tooling: A tooling charge may be imposed for any specialtooling, including without limitation, dies, fixtures, molds and patterns,acquired to manufacture items sold pursuant to this contract. Such specialtooling shall be and remain Seller’s property notwithstanding payment ofany charges by Buyer. In no event will Buyer acquire any interest inapparatus belonging to Seller which is utilized in the notwithstanding anycharges paid by Buyer. Unless otherwise agreed, Seller shall have the rightto alter, discard or otherwise dispose of any special tooling or other propertyin its sole discretion at any time.

8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,confidential information or equipment furnished by Buyer or any other itemswhich become Buyer’s property, may be considered obsolete and may bedestroyed by Seller after two (2) consecutive years have elapsed withoutBuyer placing an order for the items which are manufactured using suchproperty, Seller shall not be responsible for any loss or damage to suchproperty while it is in Seller’s possession or control.9. Taxes: Unless otherwise indicated on the face hereof, all prices andcharges are exclusive of excise, sales, use, property, occupational or liketaxes which may be imposed by any taxing authority upon the manufacture,sale or delivery of the items sold hereunder. If any such taxes must be paidby Seller or if Seller is liable for the collection of such tax, the amount thereofshall be in addition to the amounts for the items sold. Buyer agrees to payall such taxes or to reimburse Seller therefore upon receipt of its invoice. IfBuyer claims exemption from any sales, use or other tax imposed by anytaxing authority, Buyer shall save Seller harmless from and against anysuch tax, together with any interest or penalties thereon which may beassessed if the items are held to be taxable.10. Indemnity For Infringement of Intellectual Property Rights: Sellershall have no liability for infringement of any patents, trademarks, copy-rights, trade dress, trade secrets or similar rights except as provided in thisPart 10. Seller will defend and indemnify Buyer against allegations ofinfringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress andtrade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defendat its expense and will pay the cost of any settlement or damages awardedin an action brought against Buyer based on an allegation that an item soldpursuant to this contract infringes the Intellectual Property Rights of a thirdparty. Seller’s obligation to defend and indemnify Buyer is contingent onBuyer notifying Seller within ten (10) days after Buyer becomes aware ofsuch allegations of infringement, and Seller having sole control over thedefense of any allegations or actions including all negotiations for settle-ment or compromise. If an item sold hereunder is subject to a claim that itinfringes the Intellectual Property Rights of a third party, Seller may, at itssole expense and option, procure for Buyer the right to continue using saiditem, replace or modify said item so as to make it noninfringing, or offer toaccept return of said item and return the purchase price less a reasonableallowance for depreciation. Notwithstanding the foregoing, Seller shallhave no liability for claims of infringement based on information provided byBuyer, or directed to items delivered hereunder for which the designs arespecified in whole or part by Buyer, or infringements resulting from themodification, combination or use in a system of any item sold hereunder.The foregoing provisions of this Part 10 shall constitute Seller’s sole andexclusive liability and Buyer’s sole and exclusive remedy for infringementof Intellectual Property Rights.If a claim is based on information provided by Buyer or if the design for anitem delivered hereunder is specified in whole or in part by Buyer, Buyershall defend and indemnify Seller for all costs, expenses or judgmentsresulting from any claim that such item infringes any patent, trademark,copyright, trade dress, trade secret or any similar right.11. Force Majeure: Seller does not assume the risk of and shall not be liablefor delay or failure to perform any of Seller’s obligations by reason ofcircumstances beyond the reasonable control of Seller (hereinafter ‘Eventsof Force Majeure’). Events of Force Majeure shall include without limitation,accidents, acts of God, strikes or labor disputes, acts, laws, rules orregulations of any government or government agency, fires, floods, delaysor failures in delivery of carriers or suppliers, shortages of materials and anyother cause beyond Seller’s control.12. Entire Agreement/Governing Law: The terms and conditions set forthherein, together with any amendments, modifications and any differentterms or conditions expressly accepted by Seller in writing, shall constitutethe entire Agreement concerning the items sold, and there are no oral orother representations or agreements which pertain thereto. This Agree-ment shall be governed in all respects by the law of the State of Ohio. Noactions arising out of the sale of the items sold hereunder or this Agreementmay be brought by either party more than two (2) years after the cause ofaction accrues.

9/91-P

The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorizeddistributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. Thisoffer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any such items,when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute acceptanceof this offer.


39

Parker Hannifin CorporationPartek/Atlantic200 Ram Ridge RoadChestnut Ridge, NY 10977 USATel: (845) 735-8800Fax: (800) 551-TUBE (8823)

Rev. 03/02

Documents

7.1.1 Tubing and Pipe Table of Contents · 2014-11-06 · 7.1.1 Introduction, Part Number Matrix Tubing and Pipe Overview: Partek/Atlantic manufactures an extensive line of high quality